cvs.zerfleddert.de Git - proxmark3-svn/blob - armsrc/lfsampling.h

   1 #ifndef LFSAMPLING_H
   2 #define LFSAMPLING_H
   3
   4 /**
   5 * acquisition of Cotag LF signal. Similar to other LF,  since the Cotag has such long datarate RF/384
   6 * and is Manchester?,  we directly gather the manchester data into bigbuff
   7 **/
   8 void doCotagAcquisition(size_t sample_size);
   9 uint32_t doCotagAcquisitionManchester(void);
  10
  11 /**
  12 * acquisition of T55x7 LF signal. Similart to other LF, but adjusted with @marshmellows thresholds
  13 * the data is collected in BigBuf.
  14 **/
  15 void doT55x7Acquisition(size_t sample_size);
  16
  17 /**
  18 * Initializes the FPGA for reader-mode (field on), and acquires the samples.
  19 * @return number of bits sampled
  20 **/
  21 uint32_t SampleLF(bool silent);
  22
  23 /**
  24 * Initializes the FPGA for snoop-mode (field off), and acquires the samples.
  25 * @return number of bits sampled
  26 **/
  27 uint32_t SnoopLF();
  28
  29 // adds sample size to default options
  30 uint32_t DoPartialAcquisition(int trigger_threshold, bool silent, int sample_size);
  31
  32 /**
  33  * @brief Does sample acquisition, ignoring the config values set in the sample_config.
  34  * This method is typically used by tag-specific readers who just wants to read the samples
  35  * the normal way
  36  * @param trigger_threshold
  37  * @param silent
  38  * @return number of bits sampled
  39  */
  40 uint32_t DoAcquisition_default(int trigger_threshold, bool silent);
  41 /**
  42  * @brief Does sample acquisition, using the config values set in the sample_config.
  43  * @param trigger_threshold
  44  * @param silent
  45  * @return number of bits sampled
  46  */
  47
  48 uint32_t DoAcquisition_config( bool silent);
  49
  50 /**
  51 * Setup the FPGA to listen for samples. This method downloads the FPGA bitstream
  52 * if not already loaded, sets divisor and starts up the antenna.
  53 * @param divisor : 1, 88> 255 or negative ==> 134.8 KHz
  54 *                                  0 or 95 ==> 125 KHz
  55 *
  56 **/
  57 void LFSetupFPGAForADC(int divisor, bool lf_field);
  58
  59 /**
  60  * Called from the USB-handler to set the sampling configuration
  61  * The sampling config is used for std reading and snooping.
  62  *
  63  * Other functions may read samples and ignore the sampling config,
  64  * such as functions to read the UID from a prox tag or similar.
  65  *
  66  * Values set to '0' implies no change (except for averaging)
  67  * @brief setSamplingConfig
  68  * @param sc
  69  */
  70 void setSamplingConfig(sample_config *sc);
  71
  72 sample_config * getSamplingConfig();
  73
  74 void printConfig();
  75
  76
  77 #endif // LFSAMPLING_H