cvs.zerfleddert.de Git - proxmark3-svn/blob - client/fpga_compress.c

   1 //-----------------------------------------------------------------------------
   2 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
   3 // at your option, any later version. See the LICENSE.txt file for the text of
   4 // the license.
   5 //-----------------------------------------------------------------------------
   6 // Compression tool for FPGA config files. Compress several *.bit files at
   7 // compile time. Decompression is done at run time (see fpgaloader.c).
   8 // This uses the zlib library tuned to this specific case. The small file sizes
   9 // allow to use "insane" parameters for optimum compression ratio.
  10 //-----------------------------------------------------------------------------
  11
  12 #include <stdio.h>
  13 #include <stdlib.h>
  14 #include <string.h>
  15 #include <stdint.h>
  16 #include <stdbool.h>
  17 #include "zlib.h"
  18
  19 #define MAX(a,b) ((a)>(b)?(a):(b))
  20
  21 // zlib configuration
  22 #define COMPRESS_LEVEL                  9               // use best possible compression
  23 #define COMPRESS_WINDOW_BITS    15              // default = max = 15 for a window of 2^15 = 32KBytes
  24 #define COMPRESS_MEM_LEVEL              9               // determines the amount of memory allocated during compression. Default = 8.
  25 /* COMPRESS_STRATEGY can be
  26         Z_DEFAULT_STRATEGY (the default),
  27         Z_FILTERED (more huffmann, less string matching),
  28         Z_HUFFMAN_ONLY (huffman only, no string matching)
  29         Z_RLE (distances limited to one)
  30         Z_FIXED (prevents the use of dynamic Huffman codes)
  31 */
  32 #define COMPRESS_STRATEGY               Z_DEFAULT_STRATEGY
  33 // zlib tuning parameters:
  34 #define COMPRESS_GOOD_LENGTH            258
  35 #define COMPRESS_MAX_LAZY                       258
  36 #define COMPRESS_MAX_NICE_LENGTH        258
  37 #define COMPRESS_MAX_CHAIN                      8192
  38
  39 #define FPGA_INTERLEAVE_SIZE    288     // (the FPGA's internal config frame size is 288 bits. Interleaving with 288 bytes should give best compression)
  40 #define FPGA_CONFIG_SIZE                42336   // our current fpga_[lh]f.bit files are 42175 bytes. Rounded up to next multiple of FPGA_INTERLEAVE_SIZE
  41
  42 static void usage(void)
  43 {
  44         fprintf(stderr, "Usage: fpga_compress <infile1> <infile2> ... <infile_n> <outfile>\n");
  45         fprintf(stderr, "          Combine n FPGA bitstream files and compress them into one.\n\n");
  46         fprintf(stderr, "       fpga_compress -d <infile> <outfile>");
  47         fprintf(stderr, "          Decompress <infile>. Write result to <outfile>");
  48 }
  49
  50
  51 static voidpf fpga_deflate_malloc(voidpf opaque, uInt items, uInt size)
  52 {
  53         return malloc(items*size);
  54 }
  55
  56
  57 static void fpga_deflate_free(voidpf opaque, voidpf address)
  58 {
  59         return free(address);
  60 }
  61
  62
  63 static bool all_feof(FILE *infile[], uint8_t num_infiles)
  64 {
  65         for (uint16_t i = 0; i < num_infiles; i++) {
  66                 if (!feof(infile[i])) {
  67                         return false;
  68                 }
  69         }
  70
  71         return true;
  72 }
  73
  74
  75 int zlib_compress(FILE *infile[], uint8_t num_infiles, FILE *outfile)
  76 {
  77         uint8_t *fpga_config;
  78         uint32_t i;
  79         int ret;
  80         uint8_t c;
  81         z_stream compressed_fpga_stream;
  82
  83         fpga_config = malloc(num_infiles * FPGA_CONFIG_SIZE);
  84
  85         // read the input files. Interleave them into fpga_config[]
  86         i = 0;
  87         do {
  88
  89                 if (i >= num_infiles * FPGA_CONFIG_SIZE) {
  90                         fprintf(stderr, "Input files too big (total > %lu bytes). These are probably not PM3 FPGA config files.\n", num_infiles*FPGA_CONFIG_SIZE);
  91                         for(uint16_t j = 0; j < num_infiles; j++) {
  92                                 fclose(infile[j]);
  93                         }
  94                         return(EXIT_FAILURE);
  95                 }
  96
  97                 for(uint16_t j = 0; j < num_infiles; j++) {
  98                         for(uint16_t k = 0; k < FPGA_INTERLEAVE_SIZE; k++) {
  99                                 c = fgetc(infile[j]);
 100                                 if (!feof(infile[j])) {
 101                                         fpga_config[i++] = c;
 102                                 } else if (num_infiles > 1) {
 103                                         fpga_config[i++] = '\0';
 104                                 }
 105                         }
 106                 }
 107
 108         } while (!all_feof(infile, num_infiles));
 109
 110         // initialize zlib structures
 111         compressed_fpga_stream.next_in = fpga_config;
 112         compressed_fpga_stream.avail_in = i;
 113         compressed_fpga_stream.zalloc = fpga_deflate_malloc;
 114         compressed_fpga_stream.zfree = fpga_deflate_free;
 115
 116         ret = deflateInit2(&compressed_fpga_stream,
 117                                                 COMPRESS_LEVEL,
 118                                                 Z_DEFLATED,
 119                                                 COMPRESS_WINDOW_BITS,
 120                                                 COMPRESS_MEM_LEVEL,
 121                                                 COMPRESS_STRATEGY);
 122
 123         // estimate the size of the compressed output
 124         unsigned int outsize_max = deflateBound(&compressed_fpga_stream, compressed_fpga_stream.avail_in);
 125         uint8_t *outbuf = malloc(outsize_max);
 126         compressed_fpga_stream.next_out = outbuf;
 127         compressed_fpga_stream.avail_out = outsize_max;
 128
 129         if (ret == Z_OK) {
 130                 ret = deflateTune(&compressed_fpga_stream,
 131                                                         COMPRESS_GOOD_LENGTH,
 132                                                         COMPRESS_MAX_LAZY,
 133                                                         COMPRESS_MAX_NICE_LENGTH,
 134                                                         COMPRESS_MAX_CHAIN);
 135         }
 136
 137         if (ret == Z_OK) {
 138                 ret = deflate(&compressed_fpga_stream, Z_FINISH);
 139         }
 140
 141         fprintf(stderr, "compressed %lu input bytes to %lu output bytes\n", i, compressed_fpga_stream.total_out);
 142
 143         if (ret != Z_STREAM_END) {
 144                 fprintf(stderr, "Error in deflate(): %d %s\n", ret, compressed_fpga_stream.msg);
 145                 free(outbuf);
 146                 deflateEnd(&compressed_fpga_stream);
 147                 for(uint16_t j = 0; j < num_infiles; j++) {
 148                         fclose(infile[j]);
 149                 }
 150                 fclose(outfile);
 151                 free(infile);
 152                 free(fpga_config);
 153                 return(EXIT_FAILURE);
 154                 }
 155
 156         for (i = 0; i < compressed_fpga_stream.total_out; i++) {
 157                 fputc(outbuf[i], outfile);
 158         }
 159
 160         free(outbuf);
 161         deflateEnd(&compressed_fpga_stream);
 162         for(uint16_t j = 0; j < num_infiles; j++) {
 163                 fclose(infile[j]);
 164         }
 165         fclose(outfile);
 166         free(infile);
 167         free(fpga_config);
 168
 169         return(EXIT_SUCCESS);
 170
 171 }
 172
 173
 174 int zlib_decompress(FILE *infile, FILE *outfile)
 175 {
 176         #define DECOMPRESS_BUF_SIZE 1024
 177         uint8_t outbuf[DECOMPRESS_BUF_SIZE];
 178         uint8_t inbuf[DECOMPRESS_BUF_SIZE];
 179         int ret;
 180
 181         z_stream compressed_fpga_stream;
 182
 183         // initialize zlib structures
 184         compressed_fpga_stream.next_in = inbuf;
 185         compressed_fpga_stream.avail_in = 0;
 186         compressed_fpga_stream.next_out = outbuf;
 187         compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE;
 188         compressed_fpga_stream.zalloc = fpga_deflate_malloc;
 189         compressed_fpga_stream.zfree = fpga_deflate_free;
 190
 191         ret = inflateInit2(&compressed_fpga_stream, 0);
 192
 193         do {
 194                 if (compressed_fpga_stream.avail_in == 0) {
 195                         compressed_fpga_stream.next_in = inbuf;
 196                         uint16_t i = 0;
 197                         do {
 198                                 uint8_t c = fgetc(infile);
 199                                 if (!feof(infile)) {
 200                                         inbuf[i++] = c;
 201                                         compressed_fpga_stream.avail_in++;
 202                                 } else {
 203                                         break;
 204                                 }
 205                         } while (i < DECOMPRESS_BUF_SIZE);
 206                 }
 207
 208                 ret = inflate(&compressed_fpga_stream, Z_SYNC_FLUSH);
 209
 210                 if (ret != Z_OK && ret != Z_STREAM_END) {
 211                         break;
 212                 }
 213
 214                 if (compressed_fpga_stream.avail_out == 0) {
 215                         for (uint16_t i = 0; i < DECOMPRESS_BUF_SIZE; i++) {
 216                                 fputc(outbuf[i], outfile);
 217                         }
 218                         compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE;
 219                         compressed_fpga_stream.next_out = outbuf;
 220                 }
 221         } while (ret == Z_OK);
 222
 223         if (ret == Z_STREAM_END) {  // reached end of input
 224                 uint16_t i = 0;
 225                 while (compressed_fpga_stream.avail_out < DECOMPRESS_BUF_SIZE) {
 226                         fputc(outbuf[i++], outfile);
 227                         compressed_fpga_stream.avail_out++;
 228                 }
 229                 fclose(outfile);
 230                 fclose(infile);
 231                 return(EXIT_SUCCESS);
 232         } else {
 233                 fprintf(stderr, "Error. Inflate() returned error %d, %s", ret, compressed_fpga_stream.msg);
 234                 fclose(outfile);
 235                 fclose(infile);
 236                 return(EXIT_FAILURE);
 237         }
 238
 239 }
 240
 241
 242 int main(int argc, char **argv)
 243 {
 244         FILE **infiles;
 245         FILE *outfile;
 246
 247         if (argc == 1 || argc == 2) {
 248                 usage();
 249                 return(EXIT_FAILURE);
 250         }
 251
 252         if (!strcmp(argv[1], "-d")) {                   // Decompress
 253                 infiles = calloc(1, sizeof(FILE*));
 254                 if (argc != 4) {
 255                         usage();
 256                         return(EXIT_FAILURE);
 257                 }
 258                 infiles[0] = fopen(argv[2], "rb");
 259                 if (infiles[0] == NULL) {
 260                         fprintf(stderr, "Error. Cannot open input file %s", argv[2]);
 261                         return(EXIT_FAILURE);
 262                 }
 263                 outfile = fopen(argv[3], "wb");
 264                 if (outfile == NULL) {
 265                         fprintf(stderr, "Error. Cannot open output file %s", argv[3]);
 266                         return(EXIT_FAILURE);
 267                 }
 268                 return zlib_decompress(infiles[0], outfile);
 269
 270         } else {                                                                // Compress
 271
 272                 infiles = calloc(argc-2, sizeof(FILE*));
 273                 for (uint16_t i = 0; i < argc-2; i++) {
 274                         infiles[i] = fopen(argv[i+1], "rb");
 275                         if (infiles[i] == NULL) {
 276                                 fprintf(stderr, "Error. Cannot open input file %s", argv[i+1]);
 277                                 return(EXIT_FAILURE);
 278                         }
 279                 }
 280                 outfile = fopen(argv[argc-1], "wb");
 281                 if (outfile == NULL) {
 282                         fprintf(stderr, "Error. Cannot open output file %s", argv[argc-1]);
 283                         return(EXIT_FAILURE);
 284                 }
 285                 return zlib_compress(infiles, argc-2, outfile);
 286         }
 287 }