cvs.zerfleddert.de Git - proxmark3-svn/blob - armsrc/epa.c

   1 //-----------------------------------------------------------------------------
   2 // Frederik Möllers - August 2012
   3 //
   4 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
   5 // at your option, any later version. See the LICENSE.txt file for the text of
   6 // the license.
   7 //-----------------------------------------------------------------------------
   8 // Routines to support the German electronic "Personalausweis" (ID card)
   9 // Note that the functions which do not implement USB commands do NOT initialize
  10 // the card (with iso14443a_select_card etc.). If You want to use these
  11 // functions, You need to do the setup before calling them!
  12 //-----------------------------------------------------------------------------
  13
  14 #include "iso14443a.h"
  15 #include "iso14443b.h"
  16 #include "epa.h"
  17 #include "cmd.h"
  18
  19 // Protocol and Parameter Selection Request for ISO 14443 type A cards
  20 // use regular (1x) speed in both directions
  21 // CRC is already included
  22 static const uint8_t pps[] = {0xD0, 0x11, 0x00, 0x52, 0xA6};
  23
  24 // APDUs for communication with German Identification Card
  25
  26 // General Authenticate (request encrypted nonce) WITHOUT the Le at the end
  27 static const uint8_t apdu_general_authenticate_pace_get_nonce[] = {
  28         0x10, // CLA
  29         0x86, // INS
  30         0x00, // P1
  31         0x00, // P2
  32         0x02, // Lc
  33         0x7C, // Type: Dynamic Authentication Data
  34         0x00, // Length: 0 bytes
  35 };
  36
  37 // MSE: Set AT (only CLA, INS, P1 and P2)
  38 static const uint8_t apdu_mse_set_at_start[] = {
  39         0x00, // CLA
  40         0x22, // INS
  41         0xC1, // P1
  42         0xA4, // P2
  43 };
  44
  45 // SELECT BINARY with the ID for EF.CardAccess
  46 static const uint8_t apdu_select_binary_cardaccess[] = {
  47         0x00, // CLA
  48         0xA4, // INS
  49         0x02, // P1
  50         0x0C, // P2
  51         0x02, // Lc
  52         0x01, // ID
  53         0x1C  // ID
  54 };
  55
  56 // READ BINARY
  57 static const uint8_t apdu_read_binary[] = {
  58         0x00, // CLA
  59         0xB0, // INS
  60         0x00, // P1
  61         0x00, // P2
  62         0x38  // Le
  63 };
  64
  65
  66 // the leading bytes of a PACE OID
  67 static const uint8_t oid_pace_start[] = {
  68     0x04, // itu-t, identified-organization
  69     0x00, // etsi
  70     0x7F, // reserved
  71     0x00, // etsi-identified-organization
  72     0x07, // bsi-de
  73     0x02, // protocols
  74     0x02, // smartcard
  75     0x04 // id-PACE
  76 };
  77
  78 // APDUs for replaying:
  79 // MSE: Set AT (initiate PACE)
  80 static uint8_t apdu_replay_mse_set_at_pace[41];
  81 // General Authenticate (Get Nonce)
  82 static uint8_t apdu_replay_general_authenticate_pace_get_nonce[8];
  83 // General Authenticate (Map Nonce)
  84 static uint8_t apdu_replay_general_authenticate_pace_map_nonce[75];
  85 // General Authenticate (Mutual Authenticate)
  86 static uint8_t apdu_replay_general_authenticate_pace_mutual_authenticate[75];
  87 // General Authenticate (Perform Key Agreement)
  88 static uint8_t apdu_replay_general_authenticate_pace_perform_key_agreement[18];
  89 // pointers to the APDUs (for iterations)
  90 static struct {
  91         uint8_t len;
  92         uint8_t *data;
  93 } const apdus_replay[] = {
  94         {sizeof(apdu_replay_mse_set_at_pace), apdu_replay_mse_set_at_pace},
  95         {sizeof(apdu_replay_general_authenticate_pace_get_nonce), apdu_replay_general_authenticate_pace_get_nonce},
  96         {sizeof(apdu_replay_general_authenticate_pace_map_nonce), apdu_replay_general_authenticate_pace_map_nonce},
  97         {sizeof(apdu_replay_general_authenticate_pace_mutual_authenticate), apdu_replay_general_authenticate_pace_mutual_authenticate},
  98         {sizeof(apdu_replay_general_authenticate_pace_perform_key_agreement), apdu_replay_general_authenticate_pace_perform_key_agreement}
  99 };
 100
 101 // lengths of the replay APDUs
 102 static uint8_t apdu_lengths_replay[5];
 103
 104 // type of card (ISO 14443 A or B)
 105 static char iso_type = 0;
 106
 107 //-----------------------------------------------------------------------------
 108 // Wrapper for sending APDUs to type A and B cards
 109 //-----------------------------------------------------------------------------
 110 int EPA_APDU(uint8_t *apdu, size_t length, uint8_t *response)
 111 {
 112         switch(iso_type)
 113         {
 114                 case 'a':
 115                         return iso14_apdu(apdu, (uint16_t) length, response);
 116                         break;
 117                 case 'b':
 118                         return iso14443b_apdu(apdu, length, response);
 119                         break;
 120                 default:
 121                         return 0;
 122                         break;
 123         }
 124 }
 125
 126 //-----------------------------------------------------------------------------
 127 // Closes the communication channel and turns off the field
 128 //-----------------------------------------------------------------------------
 129 void EPA_Finish()
 130 {
 131         FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 132         LEDsoff();
 133         iso_type = 0;
 134 }
 135
 136 //-----------------------------------------------------------------------------
 137 // Parses DER encoded data, e.g. from EF.CardAccess and fills out the given
 138 // structs. If a pointer is 0, it is ignored.
 139 // The function returns 0 on success and if an error occured, it returns the
 140 // offset where it occured.
 141 //
 142 // TODO: This function can access memory outside of the given data if the DER
 143 //       encoding is broken
 144 // TODO: Support skipping elements with a length > 0x7F
 145 // TODO: Support OIDs with a length > 7F
 146 // TODO: Support elements with long tags (tag is longer than 1 byte)
 147 // TODO: Support proprietary PACE domain parameters
 148 //-----------------------------------------------------------------------------
 149 size_t EPA_Parse_CardAccess(uint8_t *data,
 150                             size_t length,
 151                             pace_version_info_t *pace_info)
 152 {
 153         size_t index = 0;
 154
 155         while (index <= length - 2) {
 156                 // determine type of element
 157                 // SET or SEQUENCE
 158                 if (data[index] == 0x31 || data[index] == 0x30) {
 159                         // enter the set (skip tag + length)
 160                         index += 2;
 161                         // check for extended length
 162                         if ((data[index - 1] & 0x80) != 0) {
 163                                 index += (data[index-1] & 0x7F);
 164                         }
 165                 }
 166                 // OID
 167                 else if (data[index] == 0x06) {
 168                         // is this a PACE OID?
 169                         if (data[index + 1] == 0x0A // length matches
 170                             && memcmp(data + index + 2,
 171                                       oid_pace_start,
 172                                       sizeof(oid_pace_start)) == 0 // content matches
 173                             && pace_info != NULL)
 174                         {
 175                                 // first, clear the pace_info struct
 176                                 memset(pace_info, 0, sizeof(pace_version_info_t));
 177                                 memcpy(pace_info->oid, data + index + 2, sizeof(pace_info->oid));
 178                                 // a PACE OID is followed by the version
 179                                 index += data[index + 1] + 2;
 180                                 if (data[index] == 02 && data[index + 1] == 01) {
 181                                         pace_info->version = data[index + 2];
 182                                         index += 3;
 183                                 }
 184                                 else {
 185                                         return index;
 186                                 }
 187                                 // after that there might(!) be the parameter ID
 188                                 if (data[index] == 02 && data[index + 1] == 01) {
 189                                         pace_info->parameter_id = data[index + 2];
 190                                         index += 3;
 191                                 }
 192                         }
 193                         else {
 194                                 // skip this OID
 195                                 index += 2 + data[index + 1];
 196                         }
 197                 }
 198                 // if the length is 0, something is wrong
 199                 // TODO: This needs to be extended to support long tags
 200                 else if (data[index + 1] == 0) {
 201                         return index;
 202                 }
 203                 else {
 204                         // skip this part
 205                         // TODO: This needs to be extended to support long tags
 206                         // TODO: This needs to be extended to support unknown elements with
 207                         //       a size > 0x7F
 208                         index += 2 + data[index + 1];
 209                 }
 210         }
 211
 212         // TODO: We should check whether we reached the end in error, but for that
 213         //       we need a better parser (e.g. with states like IN_SET or IN_PACE_INFO)
 214         return 0;
 215 }
 216
 217 //-----------------------------------------------------------------------------
 218 // Read the file EF.CardAccess and save it into a buffer (at most max_length bytes)
 219 // Returns -1 on failure or the length of the data on success
 220 // TODO: for the moment this sends only 1 APDU regardless of the requested length
 221 //-----------------------------------------------------------------------------
 222 int EPA_Read_CardAccess(uint8_t *buffer, size_t max_length)
 223 {
 224         // the response APDU of the card
 225         // since the card doesn't always care for the expected length we send it,
 226         // we reserve 262 bytes here just to be safe (256-byte APDU + SW + ISO frame)
 227         uint8_t response_apdu[262];
 228         int rapdu_length = 0;
 229
 230         // select the file EF.CardAccess
 231         rapdu_length = EPA_APDU((uint8_t *)apdu_select_binary_cardaccess,
 232                                   sizeof(apdu_select_binary_cardaccess),
 233                                   response_apdu);
 234         if (rapdu_length < 6
 235             || response_apdu[rapdu_length - 4] != 0x90
 236             || response_apdu[rapdu_length - 3] != 0x00)
 237         {
 238                 DbpString("Failed to select EF.CardAccess!");
 239                 return -1;
 240         }
 241
 242         // read the file
 243         rapdu_length = EPA_APDU((uint8_t *)apdu_read_binary,
 244                                   sizeof(apdu_read_binary),
 245                                   response_apdu);
 246         if (rapdu_length <= 6
 247             || response_apdu[rapdu_length - 4] != 0x90
 248             || response_apdu[rapdu_length - 3] != 0x00)
 249         {
 250                 Dbprintf("Failed to read EF.CardAccess!");
 251                 return -1;
 252         }
 253
 254         // copy the content into the buffer
 255         // length of data available: apdu_length - 4 (ISO frame) - 2 (SW)
 256         size_t to_copy = rapdu_length - 6;
 257         to_copy = to_copy < max_length ? to_copy : max_length;
 258         memcpy(buffer, response_apdu+2, to_copy);
 259         return to_copy;
 260 }
 261
 262 //-----------------------------------------------------------------------------
 263 // Abort helper function for EPA_PACE_Collect_Nonce
 264 // sets relevant data in ack, sends the response
 265 //-----------------------------------------------------------------------------
 266 static void EPA_PACE_Collect_Nonce_Abort(uint8_t step, int func_return)
 267 {
 268         // power down the field
 269         EPA_Finish();
 270
 271         // send the USB packet
 272         cmd_send(CMD_ACK,step,func_return,0,0,0);
 273 }
 274
 275 //-----------------------------------------------------------------------------
 276 // Acquire one encrypted PACE nonce
 277 //-----------------------------------------------------------------------------
 278 void EPA_PACE_Collect_Nonce(UsbCommand *c)
 279 {
 280         /*
 281          * ack layout:
 282          *      arg:
 283          *              1. element
 284          *           step where the error occured or 0 if no error occured
 285      *       2. element
 286      *           return code of the last executed function
 287          *      d:
 288          *              Encrypted nonce
 289          */
 290
 291         // return value of a function
 292         int func_return = 0;
 293
 294         // set up communication
 295         func_return = EPA_Setup();
 296         if (func_return != 0) {
 297                 EPA_PACE_Collect_Nonce_Abort(1, func_return);
 298                 return;
 299         }
 300
 301         // read the CardAccess file
 302         // this array will hold the CardAccess file
 303         uint8_t card_access[256] = {0};
 304         int card_access_length = EPA_Read_CardAccess(card_access, 256);
 305         // the response has to be at least this big to hold the OID
 306         if (card_access_length < 18) {
 307                 EPA_PACE_Collect_Nonce_Abort(2, card_access_length);
 308                 return;
 309         }
 310
 311         // this will hold the PACE info of the card
 312         pace_version_info_t pace_version_info;
 313         // search for the PACE OID
 314         func_return = EPA_Parse_CardAccess(card_access,
 315                                            card_access_length,
 316                                            &pace_version_info);
 317         if (func_return != 0 || pace_version_info.version == 0) {
 318                 EPA_PACE_Collect_Nonce_Abort(3, func_return);
 319                 return;
 320         }
 321
 322         // initiate the PACE protocol
 323         // use the CAN for the password since that doesn't change
 324         func_return = EPA_PACE_MSE_Set_AT(pace_version_info, 2);
 325
 326         // now get the nonce
 327         uint8_t nonce[256] = {0};
 328         uint8_t requested_size = (uint8_t)c->arg[0];
 329         func_return = EPA_PACE_Get_Nonce(requested_size, nonce);
 330         // check if the command succeeded
 331         if (func_return < 0)
 332         {
 333                 EPA_PACE_Collect_Nonce_Abort(4, func_return);
 334                 return;
 335         }
 336
 337         // all done, return
 338         EPA_Finish();
 339
 340         // save received information
 341         cmd_send(CMD_ACK,0,func_return,0,nonce,func_return);
 342 }
 343
 344 //-----------------------------------------------------------------------------
 345 // Performs the "Get Nonce" step of the PACE protocol and saves the returned
 346 // nonce. The caller is responsible for allocating enough memory to store the
 347 // nonce. Note that the returned size might be less or than or greater than the
 348 // requested size!
 349 // Returns the actual size of the nonce on success or a less-than-zero error
 350 // code on failure.
 351 //-----------------------------------------------------------------------------
 352 int EPA_PACE_Get_Nonce(uint8_t requested_length, uint8_t *nonce)
 353 {
 354         // build the APDU
 355         uint8_t apdu[sizeof(apdu_general_authenticate_pace_get_nonce) + 1];
 356         // copy the constant part
 357         memcpy(apdu,
 358                apdu_general_authenticate_pace_get_nonce,
 359                sizeof(apdu_general_authenticate_pace_get_nonce));
 360         // append Le (requested length + 2 due to tag/length taking 2 bytes) in RAPDU
 361         apdu[sizeof(apdu_general_authenticate_pace_get_nonce)] = requested_length + 4;
 362
 363         // send it
 364         uint8_t response_apdu[262];
 365         int send_return = EPA_APDU(apdu,
 366                                      sizeof(apdu),
 367                                      response_apdu);
 368         // check if the command succeeded
 369         if (send_return < 6
 370                 || response_apdu[send_return - 4] != 0x90
 371                 || response_apdu[send_return - 3] != 0x00)
 372         {
 373                 return -1;
 374         }
 375
 376         // if there is no nonce in the RAPDU, return here
 377         if (send_return < 10)
 378         {
 379                 // no error
 380                 return 0;
 381         }
 382         // get the actual length of the nonce
 383         uint8_t nonce_length = response_apdu[5];
 384         if (nonce_length > send_return - 10)
 385         {
 386                 nonce_length = send_return - 10;
 387         }
 388         // copy the nonce
 389         memcpy(nonce, response_apdu + 6, nonce_length);
 390
 391         return nonce_length;
 392 }
 393
 394 //-----------------------------------------------------------------------------
 395 // Initializes the PACE protocol by performing the "MSE: Set AT" step
 396 // Returns 0 on success or a non-zero error code on failure
 397 //-----------------------------------------------------------------------------
 398 int EPA_PACE_MSE_Set_AT(pace_version_info_t pace_version_info, uint8_t password)
 399 {
 400         // create the MSE: Set AT APDU
 401         uint8_t apdu[23];
 402         // the minimum length (will be increased as more data is added)
 403         size_t apdu_length = 20;
 404         // copy the constant part
 405         memcpy(apdu,
 406                apdu_mse_set_at_start,
 407                sizeof(apdu_mse_set_at_start));
 408         // type: OID
 409         apdu[5] = 0x80;
 410         // length of the OID
 411         apdu[6] = sizeof(pace_version_info.oid);
 412         // copy the OID
 413         memcpy(apdu + 7,
 414                pace_version_info.oid,
 415                sizeof(pace_version_info.oid));
 416         // type: password
 417         apdu[17] = 0x83;
 418         // length: 1
 419         apdu[18] = 1;
 420         // password
 421         apdu[19] = password;
 422         // if standardized domain parameters are used, copy the ID
 423         if (pace_version_info.parameter_id != 0) {
 424                 apdu_length += 3;
 425                 // type: domain parameter
 426                 apdu[20] = 0x84;
 427                 // length: 1
 428                 apdu[21] = 1;
 429                 // copy the parameter ID
 430                 apdu[22] = pace_version_info.parameter_id;
 431         }
 432         // now set Lc to the actual length
 433         apdu[4] = apdu_length - 5;
 434         // send it
 435         uint8_t response_apdu[6];
 436         int send_return = EPA_APDU(apdu,
 437                                      apdu_length,
 438                                      response_apdu);
 439         // check if the command succeeded
 440         if (send_return != 6
 441                 || response_apdu[send_return - 4] != 0x90
 442                 || response_apdu[send_return - 3] != 0x00)
 443         {
 444                 return 1;
 445         }
 446         return 0;
 447 }
 448
 449 //-----------------------------------------------------------------------------
 450 // Perform the PACE protocol by replaying given APDUs
 451 //-----------------------------------------------------------------------------
 452 void EPA_PACE_Replay(UsbCommand *c)
 453 {
 454         uint32_t timings[sizeof(apdu_lengths_replay) / sizeof(apdu_lengths_replay[0])] = {0};
 455
 456         // if an APDU has been passed, save it
 457         if (c->arg[0] != 0) {
 458                 // make sure it's not too big
 459                 if(c->arg[2] > apdus_replay[c->arg[0] - 1].len)
 460                 {
 461                         cmd_send(CMD_ACK, 1, 0, 0, NULL, 0);
 462                 }
 463                 memcpy(apdus_replay[c->arg[0] - 1].data + c->arg[1],
 464                    c->d.asBytes,
 465                    c->arg[2]);
 466                 // save/update APDU length
 467                 if (c->arg[1] == 0) {
 468                         apdu_lengths_replay[c->arg[0] - 1] = c->arg[2];
 469                 } else {
 470                         apdu_lengths_replay[c->arg[0] - 1] += c->arg[2];
 471                 }
 472                 cmd_send(CMD_ACK, 0, 0, 0, NULL, 0);
 473                 return;
 474         }
 475
 476         // return value of a function
 477         int func_return;
 478
 479         // set up communication
 480         func_return = EPA_Setup();
 481         if (func_return != 0) {
 482                 EPA_Finish();
 483                 cmd_send(CMD_ACK, 2, func_return, 0, NULL, 0);
 484                 return;
 485         }
 486
 487         // increase the timeout (at least some cards really do need this!)/////////////
 488         // iso14a_set_timeout(0x0003FFFF);
 489
 490         // response APDU
 491         uint8_t response_apdu[300] = {0};
 492
 493         // now replay the data and measure the timings
 494         for (int i = 0; i < sizeof(apdu_lengths_replay); i++) {
 495                 StartCountUS();
 496                 func_return = EPA_APDU(apdus_replay[i].data,
 497                                          apdu_lengths_replay[i],
 498                                          response_apdu);
 499                 timings[i] = GetCountUS();
 500                 // every step but the last one should succeed
 501                 if (i < sizeof(apdu_lengths_replay) - 1
 502                     && (func_return < 6
 503                         || response_apdu[func_return - 4] != 0x90
 504                         || response_apdu[func_return - 3] != 0x00))
 505                 {
 506                         EPA_Finish();
 507                         cmd_send(CMD_ACK, 3 + i, func_return, 0, timings, 20);
 508                         return;
 509                 }
 510         }
 511         EPA_Finish();
 512         cmd_send(CMD_ACK,0,0,0,timings,20);
 513         return;
 514 }
 515
 516 //-----------------------------------------------------------------------------
 517 // Set up a communication channel (Card Select, PPS)
 518 // Returns 0 on success or a non-zero error code on failure
 519 //-----------------------------------------------------------------------------
 520 int EPA_Setup()
 521 {
 522         int return_code = 0;
 523         uint8_t uid[10];
 524         uint8_t pps_response[3];
 525         uint8_t pps_response_par[1];
 526         iso14a_card_select_t card_select_info;
 527
 528         // first, look for type A cards
 529         // power up the field
 530         iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
 531         // select the card
 532         return_code = iso14443a_select_card(uid, &card_select_info, NULL, true, 0);
 533         if (return_code == 1) {
 534         // send the PPS request
 535         ReaderTransmit((uint8_t *)pps, sizeof(pps), NULL);
 536         return_code = ReaderReceive(pps_response, pps_response_par);
 537         if (return_code != 3 || pps_response[0] != 0xD0) {
 538                 return return_code == 0 ? 2 : return_code;
 539         }
 540                 Dbprintf("ISO 14443 Type A");
 541                 iso_type = 'a';
 542         return 0;
 543         }
 544
 545         // if we're here, there is no type A card, so we look for type B
 546         // power up the field
 547         iso14443b_setup();
 548         // select the card
 549         return_code = iso14443b_select_card();
 550         if (return_code == 1) {
 551                 Dbprintf("ISO 14443 Type B");
 552                 iso_type = 'b';
 553                 return 0;
 554         }
 555         Dbprintf("No card found.");
 556         return 1;
 557 }