cvs.zerfleddert.de Git - proxmark3-svn/blob - common/protocols.h

   1 #ifndef PROTOCOLS_H
   2 #define PROTOCOLS_H
   3
   4 //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
   5 /*
   6 ISO14443A (usually NFC tags)
   7         26 (7bits) = REQA
   8         30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
   9         A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
  10         52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
  11         93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
  12         93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
  13         95 20 = Anticollision of cascade level2
  14         95 70 = Select of cascade level2
  15         50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
  16 Mifare
  17         60 = Authenticate with KeyA
  18         61 = Authenticate with KeyB
  19         40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
  20         C0 = Decrement
  21         C1 = Increment
  22         C2 = Restore
  23         B0 = Transfer
  24 Ultralight C
  25         A0 = Compatibility Write (to accomodate MIFARE commands)
  26         1A = Step1 Authenticate
  27         AF = Step2 Authenticate
  28
  29
  30 ISO14443B
  31         05 = REQB
  32         1D = ATTRIB
  33         50 = HALT
  34 SRIX4K (tag does not respond to 05)
  35         06 00 = INITIATE
  36         0E xx = SELECT ID (xx = Chip-ID)
  37         0B = Get UID
  38         08 yy = Read Block (yy = block number)
  39         09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
  40         0C = Reset to Inventory
  41         0F = Completion
  42         0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
  43
  44
  45 ISO15693
  46         MANDATORY COMMANDS (all ISO15693 tags must support those)
  47                 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
  48                 02 = Stay Quiet
  49         OPTIONAL COMMANDS (not all tags support them)
  50                 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
  51                 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
  52                 22 = Lock Block
  53                 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
  54                 25 = Select
  55                 26 = Reset to Ready
  56                 27 = Write AFI
  57                 28 = Lock AFI
  58                 29 = Write DSFID
  59                 2A = Lock DSFID
  60                 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
  61                 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)
  62
  63 EM Microelectronic CUSTOM COMMANDS
  64         A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
  65         A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
  66         B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
  67         E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
  68 NXP/Philips CUSTOM COMMANDS
  69         A0 = Inventory Read
  70         A1 = Fast Inventory Read
  71         A2 = Set EAS
  72         A3 = Reset EAS
  73         A4 = Lock EAS
  74         A5 = EAS Alarm
  75         A6 = Password Protect EAS
  76         A7 = Write EAS ID
  77         A8 = Read EPC
  78         B0 = Inventory Page Read
  79         B1 = Fast Inventory Page Read
  80         B2 = Get Random Number
  81         B3 = Set Password
  82         B4 = Write Password
  83         B5 = Lock Password
  84         B6 = Bit Password Protection
  85         B7 = Lock Page Protection Condition
  86         B8 = Get Multiple Block Protection Status
  87         B9 = Destroy SLI
  88         BA = Enable Privacy
  89         BB = 64bit Password Protection
  90         40 = Long Range CMD (Standard ISO/TR7003:1990)
  91                 */
  92
  93 #define ICLASS_CMD_ACTALL           0x0A
  94 #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
  95 #define ICLASS_CMD_SELECT           0x81
  96 #define ICLASS_CMD_PAGESEL          0x84
  97 #define ICLASS_CMD_READCHECK_KD     0x88
  98 #define ICLASS_CMD_READCHECK_KC     0x18
  99 #define ICLASS_CMD_CHECK            0x05
 100 #define ICLASS_CMD_DETECT           0x0F
 101 #define ICLASS_CMD_HALT             0x00
 102 #define ICLASS_CMD_UPDATE           0x87
 103 #define ICLASS_CMD_ACT              0x8E
 104 #define ICLASS_CMD_READ4            0x06
 105
 106
 107 #define ISO14443A_CMD_REQA       0x26
 108 #define ISO14443A_CMD_WUPA       0x52
 109 #define ISO14443A_CMD_ANTICOLL_OR_SELECT     0x93
 110 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2   0x95
 111 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_3   0x97
 112 #define ISO14443A_CMD_HALT       0x50
 113 #define ISO14443A_CMD_RATS       0xE0
 114
 115 #define MIFARE_CMD_READBLOCK     0x30
 116 #define MIFARE_CMD_WRITEBLOCK    0xA0
 117 #define MIFARE_AUTH_KEYA         0x60
 118 #define MIFARE_AUTH_KEYB         0x61
 119 #define MIFARE_MAGICWUPC1        0x40
 120 #define MIFARE_MAGICWUPC2        0x43
 121 #define MIFARE_MAGICWIPEC        0x41
 122 #define MIFARE_CMD_INC           0xC0
 123 #define MIFARE_CMD_DEC           0xC1
 124 #define MIFARE_CMD_RESTORE       0xC2
 125 #define MIFARE_CMD_TRANSFER      0xB0
 126
 127 #define MIFARE_EV1_PERSONAL_UID  0x40
 128 #define MIFARE_EV1_SETMODE       0x43
 129
 130 #define MIFARE_ULC_WRITE         0xA2
 131 #define MIFARE_ULC_COMP_WRITE    MIFARE_CMD_WRITEBLOCK
 132 #define MIFARE_ULC_AUTH_1        0x1A
 133 #define MIFARE_ULC_AUTH_2        0xAF
 134
 135 #define MIFARE_ULEV1_AUTH        0x1B
 136 #define MIFARE_ULEV1_VERSION     0x60
 137 #define MIFARE_ULEV1_FASTREAD    0x3A
 138 #define MIFARE_ULEV1_WRITE       0xA2
 139 #define MIFARE_ULEV1_COMP_WRITE  MIFARE_CMD_WRITEBLOCK
 140 #define MIFARE_ULEV1_READ_CNT    0x39
 141 #define MIFARE_ULEV1_INCR_CNT    0xA5
 142 #define MIFARE_ULEV1_READSIG     0x3C
 143 #define MIFARE_ULEV1_CHECKTEAR   0x3E
 144 #define MIFARE_ULEV1_VCSL        0x4B
 145
 146 // mifare 4bit card answers
 147 #define CARD_ACK                 0x0A  // 1010 - ACK
 148 #define CARD_NACK_NA             0x04  // 0100 - NACK, not allowed (command not allowed)
 149 #define CARD_NACK_TR             0x05  // 0101 - NACK, transmission error
 150
 151
 152 /**
 153 06 00 = INITIATE
 154 0E xx = SELECT ID (xx = Chip-ID)
 155 0B = Get UID
 156 08 yy = Read Block (yy = block number)
 157 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
 158 0C = Reset to Inventory
 159 0F = Completion
 160 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
 161 **/
 162
 163 #define ISO14443B_REQB         0x05
 164 #define ISO14443B_ATTRIB       0x1D
 165 #define ISO14443B_HALT         0x50
 166 #define ISO14443B_INITIATE     0x06
 167 #define ISO14443B_SELECT       0x0E
 168 #define ISO14443B_GET_UID      0x0B
 169 #define ISO14443B_READ_BLK     0x08
 170 #define ISO14443B_WRITE_BLK    0x09
 171 #define ISO14443B_RESET        0x0C
 172 #define ISO14443B_COMPLETION   0x0F
 173 #define ISO14443B_AUTHENTICATE 0x0A
 174
 175 // ISO15693 COMMANDS
 176 #define ISO15693_INVENTORY                   0x01
 177 #define ISO15693_STAYQUIET                   0x02
 178 #define ISO15693_READBLOCK                   0x20
 179 #define ISO15693_WRITEBLOCK                  0x21
 180 #define ISO15693_LOCKBLOCK                   0x22
 181 #define ISO15693_READ_MULTI_BLOCK            0x23
 182 #define ISO15693_SELECT                      0x25
 183 #define ISO15693_RESET_TO_READY              0x26
 184 #define ISO15693_WRITE_AFI                   0x27
 185 #define ISO15693_LOCK_AFI                    0x28
 186 #define ISO15693_WRITE_DSFID                 0x29
 187 #define ISO15693_LOCK_DSFID                  0x2A
 188 #define ISO15693_GET_SYSTEM_INFO             0x2B
 189 #define ISO15693_READ_MULTI_SECSTATUS        0x2C
 190
 191 // ISO15693 REQUEST FLAGS
 192 #define ISO15693_REQ_SUBCARRIER_TWO          (1<<0)
 193 #define ISO15693_REQ_DATARATE_HIGH           (1<<1)
 194 #define ISO15693_REQ_INVENTORY               (1<<2)
 195 #define ISO15693_REQ_PROTOCOL_EXT            (1<<3) // RFU
 196 #define ISO15693_REQ_OPTION                  (1<<6) // Command specific option selector
 197 // when REQ_INVENTORY is not set
 198 #define ISO15693_REQ_SELECT                  (1<<4) // only selected cards response
 199 #define ISO15693_REQ_ADDRESS                 (1<<5) // this req contains an address
 200 // when REQ_INVENTORY is set
 201 #define ISO15693_REQINV_AFI                  (1<<4) // AFI Field is present
 202 #define ISO15693_REQINV_SLOT1                (1<<5) // 1 Slot     (16 slots if not set)
 203
 204 // ISO15693 RESPONSE FLAGS
 205 #define ISO15693_RES_ERROR                   (1<<0)
 206 #define ISO15693_RES_EXT                     (1<<3) // Protocol Extention
 207
 208 // ISO15693 RESPONSE ERROR CODES
 209 #define ISO15693_NOERROR                     0x00
 210 #define ISO15693_ERROR_CMD_NOT_SUP           0x01 // Command not supported
 211 #define ISO15693_ERROR_CMD_NOT_REC           0x02 // Command not recognized (eg. parameter error)
 212 #define ISO15693_ERROR_CMD_OPTION            0x03 // Command option not supported
 213 #define ISO15693_ERROR_GENERIC               0x0F // No additional Info about this error
 214 #define ISO15693_ERROR_BLOCK_UNAVAILABLE     0x10
 215 #define ISO15693_ERROR_BLOCK_LOCKED_ALREADY  0x11 // cannot lock again
 216 #define ISO15693_ERROR_BLOCK_LOCKED          0x12 // cannot be changed
 217 #define ISO15693_ERROR_BLOCK_WRITE           0x13 // Writing was unsuccessful
 218 #define ISO15693_ERROR_BLOCL_WRITELOCK       0x14 // Locking was unsuccessful
 219
 220
 221 // Topaz command set:
 222 #define TOPAZ_REQA                                              0x26    // Request
 223 #define TOPAZ_WUPA                                              0x52    // WakeUp
 224 #define TOPAZ_RID                                               0x78    // Read ID
 225 #define TOPAZ_RALL                                              0x00    // Read All (all bytes)
 226 #define TOPAZ_READ                                              0x01    // Read (a single byte)
 227 #define TOPAZ_WRITE_E                                   0x53    // Write-with-erase (a single byte)
 228 #define TOPAZ_WRITE_NE                                  0x1a    // Write-no-erase (a single byte)
 229 // additional commands for Dynamic Memory Model
 230 #define TOPAZ_RSEG                                              0x10    // Read segment
 231 #define TOPAZ_READ8                                             0x02    // Read (eight bytes)
 232 #define TOPAZ_WRITE_E8                                  0x54    // Write-with-erase (eight bytes)
 233 #define TOPAZ_WRITE_NE8                                 0x1B    // Write-no-erase (eight bytes)
 234
 235
 236 #define ISO_14443A    0
 237 #define ICLASS        1
 238 #define ISO_14443B    2
 239 #define TOPAZ         3
 240 #define PROTO_MIFARE  4
 241 #define ISO_7816_4    5
 242 #define ISO_15693     6
 243 #define ISO_14443_4   7
 244
 245
 246 //-- Picopass fuses
 247 #define FUSE_FPERS   0x80
 248 #define FUSE_CODING1 0x40
 249 #define FUSE_CODING0 0x20
 250 #define FUSE_CRYPT1  0x10
 251 #define FUSE_CRYPT0  0x08
 252 #define FUSE_FPROD1  0x04
 253 #define FUSE_FPROD0  0x02
 254 #define FUSE_RA      0x01
 255
 256 // ISO 7816-4 Basic interindustry commands. For command APDU's.
 257 #define ISO7816_ERASE_BINARY             0x0E
 258 #define ISO7816_VERIFY                   0x20
 259 #define ISO7816_MANAGE_CHANNEL           0x70
 260 #define ISO7816_EXTERNAL_AUTHENTICATE    0x82
 261 #define ISO7816_GET_CHALLENGE            0x84
 262 #define ISO7816_INTERNAL_AUTHENTICATE    0x88
 263 #define ISO7816_SELECT_FILE              0xA4
 264 #define ISO7816_GET_PROCESSING_OPTIONS   0xA8
 265 #define ISO7816_READ_BINARY              0xB0
 266 #define ISO7816_READ_RECORDS             0xB2
 267 #define ISO7816_GET_RESPONSE             0xC0
 268 #define ISO7816_ENVELOPE                 0xC2
 269 #define ISO7816_GET_DATA                 0xCA
 270 #define ISO7816_WRITE_BINARY             0xD0
 271 #define ISO7816_WRITE_RECORD             0xD2
 272 #define ISO7816_UPDATE_BINARY            0xD6
 273 #define ISO7816_PUT_DATA                 0xDA
 274 #define ISO7816_UPDATE_DATA              0xDC
 275 #define ISO7816_APPEND_RECORD            0xE2
 276 // ISO7816-4    For response APDU's
 277 #define ISO7816_OK                       0x9000
 278 //      6x xx = ERROR
 279 #define ISO7816_MAX_FRAME_SIZE           261
 280
 281
 282
 283 void printIclassDumpInfo(uint8_t* iclass_dump);
 284 void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
 285
 286 /* T55x7 configuration register definitions */
 287 #define T55x7_POR_DELAY             0x00000001
 288 #define T55x7_ST_TERMINATOR         0x00000008
 289 #define T55x7_PWD                   0x00000010
 290 #define T55x7_MAXBLOCK_SHIFT        5
 291 #define T55x7_AOR                   0x00000200
 292 #define T55x7_PSKCF_RF_2            0
 293 #define T55x7_PSKCF_RF_4            0x00000400
 294 #define T55x7_PSKCF_RF_8            0x00000800
 295 #define T55x7_MODULATION_DIRECT     0
 296 #define T55x7_MODULATION_PSK1       0x00001000
 297 #define T55x7_MODULATION_PSK2       0x00002000
 298 #define T55x7_MODULATION_PSK3       0x00003000
 299 #define T55x7_MODULATION_FSK1       0x00004000
 300 #define T55x7_MODULATION_FSK2       0x00005000
 301 #define T55x7_MODULATION_FSK1a      0x00006000
 302 #define T55x7_MODULATION_FSK2a      0x00007000
 303 #define T55x7_MODULATION_MANCHESTER 0x00008000
 304 #define T55x7_MODULATION_BIPHASE    0x00010000
 305 #define T55x7_MODULATION_DIPHASE    0x00018000
 306 #define T55x7_X_MODE                0x00020000
 307 #define T55x7_BITRATE_RF_8          0
 308 #define T55x7_BITRATE_RF_16         0x00040000
 309 #define T55x7_BITRATE_RF_32         0x00080000
 310 #define T55x7_BITRATE_RF_40         0x000C0000
 311 #define T55x7_BITRATE_RF_50         0x00100000
 312 #define T55x7_BITRATE_RF_64         0x00140000
 313 #define T55x7_BITRATE_RF_100        0x00180000
 314 #define T55x7_BITRATE_RF_128        0x001C0000
 315
 316 /* T5555 (Q5) configuration register definitions */
 317 #define T5555_ST_TERMINATOR         0x00000001
 318 #define T5555_MAXBLOCK_SHIFT        0x00000001
 319 #define T5555_MODULATION_MANCHESTER 0
 320 #define T5555_MODULATION_PSK1       0x00000010
 321 #define T5555_MODULATION_PSK2       0x00000020
 322 #define T5555_MODULATION_PSK3       0x00000030
 323 #define T5555_MODULATION_FSK1       0x00000040
 324 #define T5555_MODULATION_FSK2       0x00000050
 325 #define T5555_MODULATION_BIPHASE    0x00000060
 326 #define T5555_MODULATION_DIRECT     0x00000070
 327 #define T5555_INVERT_OUTPUT         0x00000080
 328 #define T5555_PSK_RF_2              0
 329 #define T5555_PSK_RF_4              0x00000100
 330 #define T5555_PSK_RF_8              0x00000200
 331 #define T5555_USE_PWD               0x00000400
 332 #define T5555_USE_AOR               0x00000800
 333 #define T5555_SET_BITRATE(x)        (((x-2)/2)<<12)
 334 #define T5555_GET_BITRATE(x)        ((((x >> 12) & 0x3F)*2)+2)
 335 #define T5555_BITRATE_SHIFT         12 //(RF=2n+2)   ie 64=2*0x1F+2   or n = (RF-2)/2
 336 #define T5555_FAST_WRITE            0x00004000
 337 #define T5555_PAGE_SELECT           0x00008000
 338
 339 #define T55XX_WRITE_TIMEOUT 1500
 340
 341 uint32_t GetT55xxClockBit(uint32_t clock);
 342
 343 // em4x05 & em4x69 chip configuration register definitions
 344 #define EM4x05_GET_BITRATE(x)         (((x & 0x3F)*2)+2)
 345 #define EM4x05_SET_BITRATE(x)         ((x-2)/2)
 346 #define EM4x05_MODULATION_NRZ         0x00000000
 347 #define EM4x05_MODULATION_MANCHESTER  0x00000040
 348 #define EM4x05_MODULATION_BIPHASE     0x00000080
 349 #define EM4x05_MODULATION_MILLER      0x000000C0 //not supported by all 4x05/4x69 chips
 350 #define EM4x05_MODULATION_PSK1        0x00000100 //not supported by all 4x05/4x69 chips
 351 #define EM4x05_MODULATION_PSK2        0x00000140 //not supported by all 4x05/4x69 chips
 352 #define EM4x05_MODULATION_PSK3        0x00000180 //not supported by all 4x05/4x69 chips
 353 #define EM4x05_MODULATION_FSK1        0x00000200 //not supported by all 4x05/4x69 chips
 354 #define EM4x05_MODULATION_FSK2        0x00000240 //not supported by all 4x05/4x69 chips
 355 #define EM4x05_PSK_RF_2               0
 356 #define EM4x05_PSK_RF_4               0x00000400
 357 #define EM4x05_PSK_RF_8               0x00000800
 358 #define EM4x05_MAXBLOCK_SHIFT         14
 359 #define EM4x05_FIRST_USER_BLOCK       5
 360 #define EM4x05_SET_NUM_BLOCKS(x)      ((x+5-1)<<14) //# of blocks sent during default read mode
 361 #define EM4x05_GET_NUM_BLOCKS(x)      (((x>>14) & 0xF)-5+1)
 362 #define EM4x05_READ_LOGIN_REQ         1<<18
 363 #define EM4x05_READ_HK_LOGIN_REQ      1<<19
 364 #define EM4x05_WRITE_LOGIN_REQ        1<<20
 365 #define EM4x05_WRITE_HK_LOGIN_REQ     1<<21
 366 #define EM4x05_READ_AFTER_WRITE       1<<22
 367 #define EM4x05_DISABLE_ALLOWED        1<<23
 368 #define EM4x05_READER_TALK_FIRST      1<<24
 369
 370 #endif
 371 // PROTOCOLS_H