cvs.zerfleddert.de Git - proxmark3-svn/blob - fpga/hi_read_tx.v

   1 //-----------------------------------------------------------------------------
   2 // The way that we connect things when transmitting a command to an ISO
   3 // 15693 tag, using 100% modulation only for now.
   4 //
   5 // Jonathan Westhues, April 2006
   6 //-----------------------------------------------------------------------------
   7
   8 module hi_read_tx(
   9     pck0, ck_1356meg, ck_1356megb,
  10     pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
  11     adc_d, adc_clk,
  12     ssp_frame, ssp_din, ssp_dout, ssp_clk,
  13     cross_hi, cross_lo,
  14     dbg,
  15     shallow_modulation
  16 );
  17     input pck0, ck_1356meg, ck_1356megb;
  18     output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
  19     input [7:0] adc_d;
  20     output adc_clk;
  21     input ssp_dout;
  22     output ssp_frame, ssp_din, ssp_clk;
  23     input cross_hi, cross_lo;
  24     output dbg;
  25     input shallow_modulation;
  26
  27 // The high-frequency stuff. For now, for testing, just bring out the carrier,
  28 // and allow the ARM to modulate it over the SSP.
  29 reg pwr_hi;
  30 reg pwr_oe1;
  31 reg pwr_oe2;
  32 reg pwr_oe3;
  33 reg pwr_oe4;
  34 always @(ck_1356megb or ssp_dout or shallow_modulation)
  35 begin
  36     if(shallow_modulation)
  37     begin
  38         pwr_hi <= ck_1356megb;
  39         pwr_oe1 <= ~ssp_dout;
  40         pwr_oe2 <= ~ssp_dout;
  41         pwr_oe3 <= ~ssp_dout;
  42         pwr_oe4 <= 1'b0;
  43     end
  44     else
  45     begin
  46         pwr_hi <= ck_1356megb & ssp_dout;
  47         pwr_oe1 <= 1'b0;
  48         pwr_oe2 <= 1'b0;
  49         pwr_oe3 <= 1'b0;
  50         pwr_oe4 <= 1'b0;
  51     end
  52 end
  53
  54 // Then just divide the 13.56 MHz clock down to produce appropriate clocks
  55 // for the synchronous serial port.
  56
  57 reg [6:0] hi_div_by_128;
  58
  59 always @(posedge ck_1356meg)
  60     hi_div_by_128 <= hi_div_by_128 + 1;
  61
  62 assign ssp_clk = hi_div_by_128[6];
  63
  64 reg [2:0] hi_byte_div;
  65
  66 always @(negedge ssp_clk)
  67     hi_byte_div <= hi_byte_div + 1;
  68
  69 assign ssp_frame = (hi_byte_div == 3'b000);
  70
  71 // Implement a hysteresis to give out the received signal on
  72 // ssp_din. Sample at fc.
  73 assign adc_clk = ck_1356meg;
  74
  75 // ADC data appears on the rising edge, so sample it on the falling edge
  76 reg after_hysteresis;
  77 always @(negedge adc_clk)
  78 begin
  79     if(& adc_d[7:0]) after_hysteresis <= 1'b1;
  80     else if(~(| adc_d[7:0])) after_hysteresis <= 1'b0;
  81 end
  82
  83
  84 assign ssp_din = after_hysteresis;
  85
  86 assign pwr_lo = 1'b0;
  87 assign dbg = ssp_din;
  88
  89 endmodule