1 //-----------------------------------------------------------------------------
2 // Ultralight Code (c) 2013,2014 Midnitesnake & Andy Davies of Pentura
4 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
5 // at your option, any later version. See the LICENSE.txt file for the text of
7 //-----------------------------------------------------------------------------
8 // High frequency MIFARE ULTRALIGHT (C) commands
9 //-----------------------------------------------------------------------------
10 #include "loclass/des.h"
16 #include "protocols.h"
19 #define MAX_UL_BLOCKS 0x0f
20 #define MAX_ULC_BLOCKS 0x2b
21 #define MAX_ULEV1a_BLOCKS 0x13
22 #define MAX_ULEV1b_BLOCKS 0x28
23 #define MAX_NTAG_203 0x29
24 #define MAX_NTAG_210 0x13
25 #define MAX_NTAG_212 0x28
26 #define MAX_NTAG_213 0x2c
27 #define MAX_NTAG_215 0x86
28 #define MAX_NTAG_216 0xe6
29 #define MAX_MY_D_NFC 0xff
30 #define MAX_MY_D_MOVE 0x25
31 #define MAX_MY_D_MOVE_LEAN 0x0f
33 #define KEYS_3DES_COUNT 7
34 uint8_t default_3des_keys
[KEYS_3DES_COUNT
][16] = {
35 { 0x42,0x52,0x45,0x41,0x4b,0x4d,0x45,0x49,0x46,0x59,0x4f,0x55,0x43,0x41,0x4e,0x21 },// 3des std key
36 { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },// all zeroes
37 { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f },// 0x00-0x0F
38 { 0x49,0x45,0x4D,0x4B,0x41,0x45,0x52,0x42,0x21,0x4E,0x41,0x43,0x55,0x4F,0x59,0x46 },// NFC-key
39 { 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 },// all ones
40 { 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF },// all FF
41 { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF } // 11 22 33
44 #define KEYS_PWD_COUNT 10
45 uint8_t default_pwd_pack
[KEYS_PWD_COUNT
][4] = {
46 {0xFF,0xFF,0xFF,0xFF}, // PACK 0x00,0x00 -- factory default
48 {0x4A,0xF8,0x4B,0x19}, // PACK 0xE5,0xBE -- italian bus (sniffed)
49 {0x33,0x6B,0xA1,0x19}, // PACK 0x9c,0x2d -- italian bus (sniffed)
50 {0xFF,0x90,0x6C,0xB2}, // PACK 0x12,0x9e -- italian bus (sniffed)
51 {0x46,0x1c,0xA3,0x19}, // PACK 0xE9,0x5A -- italian bus (sniffed)
52 {0x35,0x1C,0xD0,0x19}, // PACK 0x9A,0x5a -- italian bus (sniffed)
54 {0x05,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- Amiiboo (sniffed) pikachu-b UID:
55 {0x7E,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
56 {0x02,0xE1,0xEE,0x36}, // PACK 0x80,0x80 -- AMiiboo (sniffed) sonic UID: 04d257 7ae33e8027
57 {0x32,0x0C,0x16,0x17}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
60 #define MAX_UL_TYPES 17
61 uint16_t UL_TYPES_ARRAY
[MAX_UL_TYPES
] = {UNKNOWN
, UL
, UL_C
, UL_EV1_48
, UL_EV1_128
, NTAG
, NTAG_203
,
62 NTAG_210
, NTAG_212
, NTAG_213
, NTAG_215
, NTAG_216
, MY_D
, MY_D_NFC
, MY_D_MOVE
, MY_D_MOVE_NFC
, MY_D_MOVE_LEAN
};
64 uint8_t UL_MEMORY_ARRAY
[MAX_UL_TYPES
] = {MAX_UL_BLOCKS
, MAX_UL_BLOCKS
, MAX_ULC_BLOCKS
, MAX_ULEV1a_BLOCKS
,
65 MAX_ULEV1b_BLOCKS
, MAX_NTAG_203
, MAX_NTAG_203
, MAX_NTAG_210
, MAX_NTAG_212
, MAX_NTAG_213
,
66 MAX_NTAG_215
, MAX_NTAG_216
, MAX_UL_BLOCKS
, MAX_MY_D_NFC
, MAX_MY_D_MOVE
, MAX_MY_D_MOVE
, MAX_MY_D_MOVE_LEAN
};
69 static int CmdHelp(const char *Cmd
);
71 // get version nxp product type
72 char *getProductTypeStr( uint8_t id
){
78 case 3: sprintf(retStr
, "%02X, Ultralight", id
); break;
79 case 4: sprintf(retStr
, "%02X, NTAG", id
); break;
80 default: sprintf(retStr
, "%02X, unknown", id
); break;
86 The 7 MSBits (=n) code the storage size itself based on 2^n,
87 the LSBit is set to '0' if the size is exactly 2^n
88 and set to '1' if the storage size is between 2^n and 2^(n+1).
90 char *getUlev1CardSizeStr( uint8_t fsize
){
94 memset(buf
, 0, sizeof(buf
));
96 uint16_t usize
= 1 << ((fsize
>>1) + 1);
97 uint16_t lsize
= 1 << (fsize
>>1);
101 sprintf(retStr
, "%02X, (%u <-> %u bytes)",fsize
, usize
, lsize
);
103 sprintf(retStr
, "%02X, (%u bytes)", fsize
, lsize
);
107 static void ul_switch_on_field(void) {
108 UsbCommand c
= {CMD_READER_ISO_14443a
, {ISO14A_CONNECT
| ISO14A_NO_DISCONNECT
, 0, 0}};
109 clearCommandBuffer();
113 void ul_switch_off_field(void) {
114 UsbCommand c
= {CMD_READER_ISO_14443a
, {0, 0, 0}};
115 clearCommandBuffer();
119 static int ul_send_cmd_raw( uint8_t *cmd
, uint8_t cmdlen
, uint8_t *response
, uint16_t responseLength
) {
120 UsbCommand c
= {CMD_READER_ISO_14443a
, {ISO14A_RAW
| ISO14A_NO_DISCONNECT
| ISO14A_APPEND_CRC
, cmdlen
, 0}};
121 memcpy(c
.d
.asBytes
, cmd
, cmdlen
);
122 clearCommandBuffer();
125 if (!WaitForResponseTimeout(CMD_ACK
, &resp
, 1500)) return -1;
126 if (!resp
.arg
[0] && responseLength
) return -1;
128 uint16_t resplen
= (resp
.arg
[0] < responseLength
) ? resp
.arg
[0] : responseLength
;
129 memcpy(response
, resp
.d
.asBytes
, resplen
);
133 static int ul_send_cmd_raw_crc( uint8_t *cmd, uint8_t cmdlen, uint8_t *response, uint16_t responseLength, bool append_crc ) {
134 UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT , cmdlen, 0}};
136 c.arg[0] |= ISO14A_APPEND_CRC;
138 memcpy(c.d.asBytes, cmd, cmdlen);
139 clearCommandBuffer();
142 if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
143 if (!resp.arg[0] && responseLength) return -1;
145 uint16_t resplen = (resp.arg[0] < responseLength) ? resp.arg[0] : responseLength;
146 memcpy(response, resp.d.asBytes, resplen);
150 static int ul_select( iso14a_card_select_t
*card
){
152 ul_switch_on_field();
156 ans
= WaitForResponseTimeout(CMD_ACK
, &resp
, 1500);
157 if (!ans
|| resp
.arg
[0] < 1) {
158 PrintAndLog("iso14443a card select failed");
159 ul_switch_off_field();
163 memcpy(card
, resp
.d
.asBytes
, sizeof(iso14a_card_select_t
));
167 // This read command will at least return 16bytes.
168 static int ul_read( uint8_t page
, uint8_t *response
, uint16_t responseLength
){
170 uint8_t cmd
[] = {ISO14443A_CMD_READBLOCK
, page
};
171 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
175 static int ul_comp_write( uint8_t page
, uint8_t *data
, uint8_t datalen
){
178 memset(cmd
, 0x00, sizeof(cmd
));
179 datalen
= ( datalen
> 16) ? 16 : datalen
;
181 cmd
[0] = ISO14443A_CMD_WRITEBLOCK
;
183 memcpy(cmd
+2, data
, datalen
);
185 uint8_t response
[1] = {0xff};
186 ul_send_cmd_raw(cmd
, 2+datalen
, response
, sizeof(response
));
188 if ( response
[0] == 0x0a ) return 0;
193 static int ulc_requestAuthentication( uint8_t *nonce
, uint16_t nonceLength
){
195 uint8_t cmd
[] = {MIFARE_ULC_AUTH_1
, 0x00};
196 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), nonce
, nonceLength
);
200 static int ulc_authentication( uint8_t *key
, bool switch_off_field
){
202 UsbCommand c
= {CMD_MIFAREUC_AUTH
, {switch_off_field
}};
203 memcpy(c
.d
.asBytes
, key
, 16);
204 clearCommandBuffer();
207 if ( !WaitForResponseTimeout(CMD_ACK
, &resp
, 1500) ) return 0;
208 if ( resp
.arg
[0] == 1 ) return 1;
213 static int ulev1_requestAuthentication( uint8_t *pwd
, uint8_t *pack
, uint16_t packLength
){
215 uint8_t cmd
[] = {MIFARE_ULEV1_AUTH
, pwd
[0], pwd
[1], pwd
[2], pwd
[3]};
216 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), pack
, packLength
);
220 static int ul_auth_select( iso14a_card_select_t
*card
, TagTypeUL_t tagtype
, bool hasAuthKey
, uint8_t *authenticationkey
, uint8_t *pack
, uint8_t packSize
){
221 if ( hasAuthKey
&& (tagtype
& UL_C
)) {
222 //will select card automatically and close connection on error
223 if (!ulc_authentication(authenticationkey
, false)) {
224 PrintAndLog("Error: Authentication Failed UL-C");
228 if ( !ul_select(card
) ) return 0;
231 if (ulev1_requestAuthentication(authenticationkey
, pack
, packSize
) < 1) {
232 ul_switch_off_field();
233 PrintAndLog("Error: Authentication Failed UL-EV1/NTAG");
241 static int ulev1_getVersion( uint8_t *response
, uint16_t responseLength
){
243 uint8_t cmd
[] = {MIFARE_ULEV1_VERSION
};
244 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
248 // static int ulev1_fastRead( uint8_t startblock, uint8_t endblock, uint8_t *response ){
250 // uint8_t cmd[] = {MIFARE_ULEV1_FASTREAD, startblock, endblock};
252 // if ( !ul_send_cmd_raw(cmd, sizeof(cmd), response)){
258 static int ulev1_readCounter( uint8_t counter
, uint8_t *response
, uint16_t responseLength
){
260 uint8_t cmd
[] = {MIFARE_ULEV1_READ_CNT
, counter
};
261 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
265 static int ulev1_readTearing( uint8_t counter
, uint8_t *response
, uint16_t responseLength
){
267 uint8_t cmd
[] = {MIFARE_ULEV1_CHECKTEAR
, counter
};
268 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
272 static int ulev1_readSignature( uint8_t *response
, uint16_t responseLength
){
274 uint8_t cmd
[] = {MIFARE_ULEV1_READSIG
, 0x00};
275 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
279 static int ul_print_default( uint8_t *data
){
290 PrintAndLog(" UID : %s ", sprint_hex(uid
, 7));
291 PrintAndLog(" UID[0] : %02X, %s", uid
[0], getTagInfo(uid
[0]) );
292 if ( uid
[0] == 0x05 && ((uid
[1] & 0xf0) >> 4) == 2 ) { // is infineon and 66RxxP
293 uint8_t chip
= (data
[8] & 0xC7); // 11000111 mask, bit 3,4,5 RFU
295 case 0xc2: PrintAndLog(" IC type : SLE 66R04P 770 Bytes"); break; //77 pages
296 case 0xc4: PrintAndLog(" IC type : SLE 66R16P 2560 Bytes"); break; //256 pages
297 case 0xc6: PrintAndLog(" IC type : SLE 66R32P 5120 Bytes"); break; //512 pages /2 sectors
300 // CT (cascade tag byte) 0x88 xor SN0 xor SN1 xor SN2
301 int crc0
= 0x88 ^ data
[0] ^ data
[1] ^data
[2];
302 if ( data
[3] == crc0
)
303 PrintAndLog(" BCC0 : %02X, Ok", data
[3]);
305 PrintAndLog(" BCC0 : %02X, crc should be %02X", data
[3], crc0
);
307 int crc1
= data
[4] ^ data
[5] ^ data
[6] ^data
[7];
308 if ( data
[8] == crc1
)
309 PrintAndLog(" BCC1 : %02X, Ok", data
[8]);
311 PrintAndLog(" BCC1 : %02X, crc should be %02X", data
[8], crc1
);
313 PrintAndLog(" Internal : %02X, %sdefault", data
[9], (data
[9]==0x48)?"":"not " );
315 PrintAndLog(" Lock : %s - %s",
316 sprint_hex(data
+10, 2),
317 printBits(2, data
+10)
320 PrintAndLog("OneTimePad : %s - %s\n",
321 sprint_hex(data
+ 12, 4),
322 printBits(4, data
+12)
328 static int ndef_print_CC(uint8_t *data
) {
333 PrintAndLog("--- NDEF Message");
334 PrintAndLog("Capability Container: %s", sprint_hex(data
,4) );
335 PrintAndLog(" %02X : NDEF Magic Number", data
[0]);
336 PrintAndLog(" %02X : version %d.%d supported by tag", data
[1], (data
[1] & 0xF0) >> 4, data
[1] & 0x0f);
337 PrintAndLog(" %02X : Physical Memory Size: %d bytes", data
[2], (data
[2] + 1) * 8);
338 if ( data
[2] == 0x12 )
339 PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data
[2], 144);
340 else if ( data
[2] == 0x3e )
341 PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data
[2], 496);
342 else if ( data
[2] == 0x6d )
343 PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data
[2], 872);
345 PrintAndLog(" %02X : %s / %s", data
[3],
346 (data
[3] & 0xF0) ? "(RFU)" : "Read access granted without any security",
347 (data
[3] & 0x0F)==0 ? "Write access granted without any security" : (data
[3] & 0x0F)==0x0F ? "No write access granted at all" : "(RFU)");
351 int ul_print_type(uint32_t tagtype
, uint8_t spaces
){
354 char *spacer
= spc
+ (10-spaces
);
357 PrintAndLog("%sTYPE : MIFARE Ultralight (MF0ICU1) %s", spacer
, (tagtype
& MAGIC
) ? "<magic>" : "" );
358 else if ( tagtype
& UL_C
)
359 PrintAndLog("%sTYPE : MIFARE Ultralight C (MF0ULC) %s", spacer
, (tagtype
& MAGIC
) ? "<magic>" : "" );
360 else if ( tagtype
& UL_EV1_48
)
361 PrintAndLog("%sTYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)", spacer
);
362 else if ( tagtype
& UL_EV1_128
)
363 PrintAndLog("%sTYPE : MIFARE Ultralight EV1 128bytes (MF0UL2101)", spacer
);
364 else if ( tagtype
& NTAG
)
365 PrintAndLog("%sTYPE : NTAG UNKNOWN", spacer
);
366 else if ( tagtype
& NTAG_203
)
367 PrintAndLog("%sTYPE : NTAG 203 144bytes (NT2H0301F0DT)", spacer
);
368 else if ( tagtype
& NTAG_210
)
369 PrintAndLog("%sTYPE : NTAG 210 48bytes (NT2L1011G0DU)", spacer
);
370 else if ( tagtype
& NTAG_212
)
371 PrintAndLog("%sTYPE : NTAG 212 128bytes (NT2L1211G0DU)", spacer
);
372 else if ( tagtype
& NTAG_213
)
373 PrintAndLog("%sTYPE : NTAG 213 144bytes (NT2H1311G0DU)", spacer
);
374 else if ( tagtype
& NTAG_215
)
375 PrintAndLog("%sTYPE : NTAG 215 504bytes (NT2H1511G0DU)", spacer
);
376 else if ( tagtype
& NTAG_216
)
377 PrintAndLog("%sTYPE : NTAG 216 888bytes (NT2H1611G0DU)", spacer
);
378 else if ( tagtype
& NTAG_I2C_1K
)
379 PrintAndLog("%sTYPE : NTAG I%sC 888bytes (NT3H1101FHK)", spacer
, "\xFD");
380 else if ( tagtype
& NTAG_I2C_2K
)
381 PrintAndLog("%sTYPE : NTAG I%sC 1904bytes (NT3H1201FHK)", spacer
, "\xFD");
382 else if ( tagtype
& MY_D
)
383 PrintAndLog("%sTYPE : INFINEON my-d\x99 (SLE 66RxxS)", spacer
);
384 else if ( tagtype
& MY_D_NFC
)
385 PrintAndLog("%sTYPE : INFINEON my-d\x99 NFC (SLE 66RxxP)", spacer
);
386 else if ( tagtype
& MY_D_MOVE
)
387 PrintAndLog("%sTYPE : INFINEON my-d\x99 move (SLE 66R01P)", spacer
);
388 else if ( tagtype
& MY_D_MOVE_NFC
)
389 PrintAndLog("%sTYPE : INFINEON my-d\x99 move NFC (SLE 66R01P)", spacer
);
390 else if ( tagtype
& MY_D_MOVE_LEAN
)
391 PrintAndLog("%sTYPE : INFINEON my-d\x99 move lean (SLE 66R01L)", spacer
);
393 PrintAndLog("%sTYPE : Unknown %06x", spacer
, tagtype
);
397 static int ulc_print_3deskey( uint8_t *data
){
398 PrintAndLog(" deskey1 [44/0x2C] : %s [%.4s]", sprint_hex(data
,4),data
);
399 PrintAndLog(" deskey1 [45/0x2D] : %s [%.4s]", sprint_hex(data
+4 ,4),data
+4);
400 PrintAndLog(" deskey2 [46/0x2E] : %s [%.4s]", sprint_hex(data
+8 ,4),data
+8);
401 PrintAndLog(" deskey2 [47/0x2F] : %s [%.4s]", sprint_hex(data
+12,4),data
+12);
402 PrintAndLog("\n 3des key : %s", sprint_hex(SwapEndian64(data
, 16, 8), 16));
406 static int ulc_print_configuration( uint8_t *data
){
408 PrintAndLog("--- UL-C Configuration");
409 PrintAndLog(" Higher Lockbits [40/0x28] : %s - %s", sprint_hex(data
, 4), printBits(2, data
));
410 PrintAndLog(" Counter [41/0x29] : %s - %s", sprint_hex(data
+4, 4), printBits(2, data
+4));
412 bool validAuth
= (data
[8] >= 0x03 && data
[8] <= 0x30);
414 PrintAndLog(" Auth0 [42/0x2A] : %s page %d/0x%02X and above need authentication", sprint_hex(data
+8, 4), data
[8],data
[8] );
417 PrintAndLog(" Auth0 [42/0x2A] : %s default", sprint_hex(data
+8, 4) );
419 PrintAndLog(" Auth0 [42/0x2A] : %s auth byte is out-of-range", sprint_hex(data
+8, 4) );
422 PrintAndLog(" Auth1 [43/0x2B] : %s %s",
423 sprint_hex(data
+12, 4),
424 (data
[12] & 1) ? "write access restricted": "read and write access restricted"
429 static int ulev1_print_configuration( uint8_t *data
, uint8_t startPage
){
431 PrintAndLog("\n--- Tag Configuration");
433 bool strg_mod_en
= (data
[0] & 2);
434 uint8_t authlim
= (data
[4] & 0x07);
435 bool cfglck
= (data
[4] & 0x40);
436 bool prot
= (data
[4] & 0x80);
437 uint8_t vctid
= data
[5];
439 PrintAndLog(" cfg0 [%u/0x%02X] : %s", startPage
, startPage
, sprint_hex(data
, 4));
440 if ( data
[3] < 0xff )
441 PrintAndLog(" - page %d and above need authentication",data
[3]);
443 PrintAndLog(" - pages don't need authentication");
444 PrintAndLog(" - strong modulation mode %s", (strg_mod_en
) ? "enabled":"disabled");
445 PrintAndLog(" cfg1 [%u/0x%02X] : %s", startPage
+ 1, startPage
+ 1, sprint_hex(data
+4, 4) );
447 PrintAndLog(" - Unlimited password attempts");
449 PrintAndLog(" - Max number of password attempts is %d", authlim
);
450 PrintAndLog(" - user configuration %s", cfglck
? "permanently locked":"writeable");
451 PrintAndLog(" - %s access is protected with password", prot
? "read and write":"write");
452 PrintAndLog(" - %02X, Virtual Card Type Identifier is %s default", vctid
, (vctid
==0x05)? "":"not");
453 PrintAndLog(" PWD [%u/0x%02X] : %s- (cannot be read)", startPage
+ 2, startPage
+ 2, sprint_hex(data
+8, 4));
454 PrintAndLog(" PACK [%u/0x%02X] : %s - (cannot be read)", startPage
+ 3, startPage
+ 3, sprint_hex(data
+12, 2));
455 PrintAndLog(" RFU [%u/0x%02X] : %s- (cannot be read)", startPage
+ 3, startPage
+ 3, sprint_hex(data
+12, 2));
459 static int ulev1_print_counters(){
460 PrintAndLog("--- Tag Counters");
461 uint8_t tear
[1] = {0};
462 uint8_t counter
[3] = {0,0,0};
464 for ( uint8_t i
= 0; i
<3; ++i
) {
465 ulev1_readTearing(i
,tear
,sizeof(tear
));
466 len
= ulev1_readCounter(i
,counter
, sizeof(counter
) );
468 PrintAndLog(" [%0d] : %s", i
, sprint_hex(counter
,3));
469 PrintAndLog(" - %02X tearing %s", tear
[0], ( tear
[0]==0xBD)?"Ok":"failure");
475 static int ulev1_print_signature( uint8_t *data
, uint8_t len
){
476 PrintAndLog("\n--- Tag Signature");
477 //PrintAndLog("IC signature public key name : NXP NTAG21x 2013"); // don't know if there is other NXP public keys.. :(
478 PrintAndLog("IC signature public key value : 04494e1a386d3d3cfe3dc10e5de68a499b1c202db5b132393e89ed19fe5be8bc61");
479 PrintAndLog(" Elliptic curve parameters : secp128r1");
480 PrintAndLog(" Tag ECC Signature : %s", sprint_hex(data
, len
));
481 //to do: verify if signature is valid
482 //PrintAndLog("IC signature status: %s valid", (iseccvalid() )?"":"not");
486 static int ulev1_print_version(uint8_t *data
){
487 PrintAndLog("\n--- Tag Version");
488 PrintAndLog(" Raw bytes : %s",sprint_hex(data
, 8) );
489 PrintAndLog(" Vendor ID : %02X, %s", data
[1], getTagInfo(data
[1]));
490 PrintAndLog(" Product type : %s", getProductTypeStr(data
[2]));
491 PrintAndLog(" Product subtype : %02X, %s", data
[3], (data
[3]==1) ?"17 pF":"50pF");
492 PrintAndLog(" Major version : %02X", data
[4]);
493 PrintAndLog(" Minor version : %02X", data
[5]);
494 PrintAndLog(" Size : %s", getUlev1CardSizeStr(data
[6]));
495 PrintAndLog(" Protocol type : %02X", data
[7]);
500 static int ulc_magic_test(){
501 // Magic Ultralight test
502 // Magic UL-C, by observation,
503 // 1) it seems to have a static nonce response to 0x1A command.
504 // 2) the deskey bytes is not-zero:d out on as datasheet states.
505 // 3) UID - changeable, not only, but pages 0-1-2-3.
506 // 4) use the ul_magic_test ! magic tags answers specially!
507 int returnValue = UL_ERROR;
508 iso14a_card_select_t card;
509 uint8_t nonce1[11] = {0x00};
510 uint8_t nonce2[11] = {0x00};
511 int status = ul_select(&card);
515 status = ulc_requestAuthentication(nonce1, sizeof(nonce1));
517 status = ulc_requestAuthentication(nonce2, sizeof(nonce2));
518 returnValue = ( !memcmp(nonce1, nonce2, 11) ) ? UL_C_MAGIC : UL_C;
522 ul_switch_off_field();
526 static int ul_magic_test(){
528 // Magic Ultralight tests
529 // 1) take present UID, and try to write it back. OBSOLETE
530 // 2) make a wrong length write to page0, and see if tag answers with ACK/NACK:
531 iso14a_card_select_t card
;
532 if ( !ul_select(&card
) )
534 int status
= ul_comp_write(0, NULL
, 0);
535 ul_switch_off_field();
541 uint32_t GetHF14AMfU_Type(void){
543 TagTypeUL_t tagtype
= UNKNOWN
;
544 iso14a_card_select_t card
;
545 uint8_t version
[10] = {0x00};
549 if (!ul_select(&card
)) return UL_ERROR
;
551 // Ultralight - ATQA / SAK
552 if ( card
.atqa
[1] != 0x00 || card
.atqa
[0] != 0x44 || card
.sak
!= 0x00 ) {
553 PrintAndLog("Tag is not Ultralight | NTAG | MY-D [ATQA: %02X %02X SAK: %02X]\n", card
.atqa
[1], card
.atqa
[0], card
.sak
);
554 ul_switch_off_field();
558 if ( card
.uid
[0] != 0x05) {
560 len
= ulev1_getVersion(version
, sizeof(version
));
561 ul_switch_off_field();
566 if ( version
[2] == 0x03 && version
[6] == 0x0B )
568 else if ( version
[2] == 0x03 && version
[6] != 0x0B )
569 tagtype
= UL_EV1_128
;
570 else if ( version
[2] == 0x04 && version
[3] == 0x01 && version
[6] == 0x0B )
572 else if ( version
[2] == 0x04 && version
[3] == 0x01 && version
[6] == 0x0E )
574 else if ( version
[2] == 0x04 && version
[3] == 0x02 && version
[6] == 0x0F )
576 else if ( version
[2] == 0x04 && version
[3] == 0x02 && version
[6] == 0x11 )
578 else if ( version
[2] == 0x04 && version
[3] == 0x02 && version
[6] == 0x13 )
580 else if ( version
[2] == 0x04 && version
[3] == 0x05 && version
[6] == 0x13 )
581 tagtype
= NTAG_I2C_1K
;
582 else if ( version
[2] == 0x04 && version
[3] == 0x05 && version
[6] == 0x15 )
583 tagtype
= NTAG_I2C_2K
;
584 else if ( version
[2] == 0x04 )
589 case 0x01: tagtype
= UL_C
; break;
590 case 0x00: tagtype
= UL
; break;
591 case -1 : tagtype
= (UL
| UL_C
| NTAG_203
); break; // could be UL | UL_C magic tags
592 default : tagtype
= UNKNOWN
; break;
594 // UL vs UL-C vs ntag203 test
595 if (tagtype
& (UL
| UL_C
| NTAG_203
)) {
596 if ( !ul_select(&card
) ) return UL_ERROR
;
598 // do UL_C check first...
599 uint8_t nonce
[11] = {0x00};
600 status
= ulc_requestAuthentication(nonce
, sizeof(nonce
));
601 ul_switch_off_field();
605 // need to re-select after authentication error
606 if ( !ul_select(&card
) ) return UL_ERROR
;
608 uint8_t data
[16] = {0x00};
609 // read page 0x26-0x29 (last valid ntag203 page)
610 status
= ul_read(0x26, data
, sizeof(data
));
614 // read page 0x30 (should error if it is a ntag203)
615 status
= ul_read(0x30, data
, sizeof(data
));
622 ul_switch_off_field();
626 ul_switch_off_field();
627 // Infinition MY-D tests Exam high nibble
628 uint8_t nib
= (card
.uid
[1] & 0xf0) >> 4;
630 // case 0: tagtype = SLE66R35E7; break; //or SLE 66R35E7 - mifare compat... should have different sak/atqa for mf 1k
631 case 1: tagtype
= MY_D
; break; //or SLE 66RxxS ... up to 512 pages of 8 user bytes...
632 case 2: tagtype
= (MY_D_NFC
); break; //or SLE 66RxxP ... up to 512 pages of 8 user bytes... (or in nfc mode FF pages of 4 bytes)
633 case 3: tagtype
= (MY_D_MOVE
| MY_D_MOVE_NFC
); break; //or SLE 66R01P // 38 pages of 4 bytes //notice: we can not currently distinguish between these two
634 case 7: tagtype
= MY_D_MOVE_LEAN
; break; //or SLE 66R01L // 16 pages of 4 bytes
638 tagtype
|= ul_magic_test();
639 if (tagtype
== (UNKNOWN
| MAGIC
)) tagtype
= (UL_MAGIC
);
643 int CmdHF14AMfUInfo(const char *Cmd
){
645 uint8_t authlim
= 0xff;
646 uint8_t data
[16] = {0x00};
647 iso14a_card_select_t card
;
650 bool hasAuthKey
= false;
652 bool swapEndian
= false;
655 uint8_t authenticationkey
[16] = {0x00};
656 uint8_t *authkeyptr
= authenticationkey
;
658 uint8_t pack
[4] = {0,0,0,0};
662 while(param_getchar(Cmd
, cmdp
) != 0x00)
664 switch(param_getchar(Cmd
, cmdp
))
668 return usage_hf_mfu_info();
671 dataLen
= param_getstr(Cmd
, cmdp
+1, tempStr
);
672 if (dataLen
== 32 || dataLen
== 8) { //ul-c or ev1/ntag key length
673 errors
= param_gethex(tempStr
, 0, authenticationkey
, dataLen
);
674 dataLen
/= 2; // handled as bytes from now on
676 PrintAndLog("\nERROR: Key is incorrect length\n");
688 PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd
, cmdp
));
696 if(errors
) return usage_hf_mfu_info();
698 TagTypeUL_t tagtype
= GetHF14AMfU_Type();
699 if (tagtype
== UL_ERROR
) return -1;
701 PrintAndLog("\n--- Tag Information ---------");
702 PrintAndLog("-------------------------------------------------------------");
703 ul_print_type(tagtype
, 6);
706 if (swapEndian
&& hasAuthKey
) authkeyptr
= SwapEndian64(authenticationkey
, dataLen
, (dataLen
== 16) ? 8 : 4 );
708 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
710 // read pages 0,1,2,3 (should read 4pages)
711 status
= ul_read(0, data
, sizeof(data
));
712 if ( status
== -1 ) {
713 ul_switch_off_field();
714 PrintAndLog("Error: tag didn't answer to READ");
716 } else if (status
== 16) {
717 ul_print_default(data
);
718 ndef_print_CC(data
+12);
724 if ((tagtype
& UL_C
)) {
726 // read pages 0x28, 0x29, 0x2A, 0x2B
727 uint8_t ulc_conf
[16] = {0x00};
728 status
= ul_read(0x28, ulc_conf
, sizeof(ulc_conf
));
730 PrintAndLog("Error: tag didn't answer to READ UL-C");
731 ul_switch_off_field();
734 if (status
== 16) ulc_print_configuration(ulc_conf
);
737 if ((tagtype
& MAGIC
)) {
739 uint8_t ulc_deskey
[16] = {0x00};
740 status
= ul_read(0x2C, ulc_deskey
, sizeof(ulc_deskey
));
741 if ( status
== -1 ) {
742 ul_switch_off_field();
743 PrintAndLog("Error: tag didn't answer to READ magic");
746 if (status
== 16) ulc_print_3deskey(ulc_deskey
);
749 ul_switch_off_field();
750 // if we called info with key, just return
751 if ( hasAuthKey
) return 1;
753 // also try to diversify default keys.. look into CmdHF14AMfuGenDiverseKeys
754 PrintAndLog("Trying some default 3des keys");
755 for (uint8_t i
= 0; i
< KEYS_3DES_COUNT
; ++i
) {
756 key
= default_3des_keys
[i
];
757 if (ulc_authentication(key
, true)) {
758 PrintAndLog("Found default 3des key: ");
760 memcpy(keySwap
, SwapEndian64(key
,16,8), 16);
761 ulc_print_3deskey(keySwap
);
769 // do counters and signature first (don't neet auth)
771 // ul counters are different than ntag counters
772 if ((tagtype
& (UL_EV1_48
| UL_EV1_128
))) {
773 if (ulev1_print_counters() != 3) {
774 // failed - re-select
775 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
779 if ((tagtype
& (UL_EV1_48
| UL_EV1_128
| NTAG_213
| NTAG_215
| NTAG_216
| NTAG_I2C_1K
| NTAG_I2C_2K
))) {
780 uint8_t ulev1_signature
[32] = {0x00};
781 status
= ulev1_readSignature( ulev1_signature
, sizeof(ulev1_signature
));
782 if ( status
== -1 ) {
783 PrintAndLog("Error: tag didn't answer to READ SIGNATURE");
784 ul_switch_off_field();
787 if (status
== 32) ulev1_print_signature( ulev1_signature
, sizeof(ulev1_signature
));
790 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
794 if ((tagtype
& (UL_EV1_48
| UL_EV1_128
| NTAG_210
| NTAG_212
| NTAG_213
| NTAG_215
| NTAG_216
| NTAG_I2C_1K
| NTAG_I2C_2K
))) {
795 uint8_t version
[10] = {0x00};
796 status
= ulev1_getVersion(version
, sizeof(version
));
797 if ( status
== -1 ) {
798 PrintAndLog("Error: tag didn't answer to GETVERSION");
799 ul_switch_off_field();
801 } else if (status
== 10) {
802 ulev1_print_version(version
);
805 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
808 uint8_t startconfigblock
= 0;
809 uint8_t ulev1_conf
[16] = {0x00};
810 // config blocks always are last 4 pages
811 for (uint8_t idx
= 0; idx
< MAX_UL_TYPES
; idx
++)
812 if (tagtype
& UL_TYPES_ARRAY
[idx
])
813 startconfigblock
= UL_MEMORY_ARRAY
[idx
]-3;
815 if (startconfigblock
){ // if we know where the config block is...
816 status
= ul_read(startconfigblock
, ulev1_conf
, sizeof(ulev1_conf
));
817 if ( status
== -1 ) {
818 PrintAndLog("Error: tag didn't answer to READ EV1");
819 ul_switch_off_field();
821 } else if (status
== 16) {
822 // save AUTHENTICATION LIMITS for later:
823 authlim
= (ulev1_conf
[4] & 0x07);
824 ulev1_print_configuration(ulev1_conf
, startconfigblock
);
828 // AUTHLIMIT, (number of failed authentications)
830 // 1-7 = limit. No automatic tries then.
831 // hasAuthKey, if we was called with key, skip test.
832 if ( !authlim
&& !hasAuthKey
) {
833 PrintAndLog("\n--- Known EV1/NTAG passwords.");
835 for (uint8_t i
= 0; i
< KEYS_PWD_COUNT
; ++i
) {
836 key
= default_pwd_pack
[i
];
837 len
= ulev1_requestAuthentication(key
, pack
, sizeof(pack
));
839 PrintAndLog("Found a default password: %s || Pack: %02X %02X",sprint_hex(key
, 4), pack
[0], pack
[1]);
842 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
845 if (len
< 1) PrintAndLog("password not known");
849 ul_switch_off_field();
850 if (locked
) PrintAndLog("\nTag appears to be locked, try using the key to get more info");
856 // Write Single Block
858 int CmdHF14AMfUWrBl(const char *Cmd
){
862 bool hasAuthKey
= false;
863 bool hasPwdKey
= false;
864 bool swapEndian
= false;
868 uint8_t blockdata
[20] = {0x00};
869 uint8_t data
[16] = {0x00};
870 uint8_t authenticationkey
[16] = {0x00};
871 uint8_t *authKeyPtr
= authenticationkey
;
873 // starting with getting tagtype
874 TagTypeUL_t tagtype
= GetHF14AMfU_Type();
875 if (tagtype
== UL_ERROR
) return -1;
877 while(param_getchar(Cmd
, cmdp
) != 0x00)
879 switch(param_getchar(Cmd
, cmdp
))
883 return usage_hf_mfu_wrbl();
887 keylen
= param_gethex(Cmd
, cmdp
+1, data
, 8);
889 memcpy(authenticationkey
, data
, 4);
895 keylen
= param_gethex(Cmd
, cmdp
+1, data
, 32);
897 memcpy(authenticationkey
, data
, 16);
902 PrintAndLog("\nERROR: Key is incorrect length\n");
907 blockNo
= param_get8(Cmd
, cmdp
+1);
909 uint8_t maxblockno
= 0;
910 for (uint8_t idx
= 0; idx
< MAX_UL_TYPES
; idx
++){
911 if (tagtype
& UL_TYPES_ARRAY
[idx
])
912 maxblockno
= UL_MEMORY_ARRAY
[idx
];
916 PrintAndLog("Wrong block number");
919 if (blockNo
> maxblockno
){
920 PrintAndLog("block number too large. Max block is %u/0x%02X \n", maxblockno
,maxblockno
);
932 if ( param_gethex(Cmd
, cmdp
+1, blockdata
, 8) ) {
933 PrintAndLog("Block data must include 8 HEX symbols");
940 PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd
, cmdp
));
945 if(errors
) return usage_hf_mfu_wrbl();
948 if ( blockNo
== -1 ) return usage_hf_mfu_wrbl();
951 if (swapEndian
&& hasAuthKey
) authKeyPtr
= SwapEndian64(authenticationkey
, 16, 8);
952 if (swapEndian
&& hasPwdKey
) authKeyPtr
= SwapEndian64(authenticationkey
, 4, 4);
955 PrintAndLog("Special Block: %0d (0x%02X) [ %s]", blockNo
, blockNo
, sprint_hex(blockdata
, 4));
957 PrintAndLog("Block: %0d (0x%02X) [ %s]", blockNo
, blockNo
, sprint_hex(blockdata
, 4));
960 UsbCommand c
= {CMD_MIFAREU_WRITEBL
, {blockNo
}};
961 memcpy(c
.d
.asBytes
,blockdata
,4);
965 memcpy(c
.d
.asBytes
+4,authKeyPtr
,16);
967 else if ( hasPwdKey
) {
969 memcpy(c
.d
.asBytes
+4,authKeyPtr
,4);
972 clearCommandBuffer();
975 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1500)) {
976 uint8_t isOK
= resp
.arg
[0] & 0xff;
977 PrintAndLog("isOk:%02x", isOK
);
979 PrintAndLog("Command execute timeout");
987 int CmdHF14AMfURdBl(const char *Cmd
){
991 bool hasAuthKey
= false;
992 bool hasPwdKey
= false;
993 bool swapEndian
= false;
996 uint8_t data
[16] = {0x00};
997 uint8_t authenticationkey
[16] = {0x00};
998 uint8_t *authKeyPtr
= authenticationkey
;
1000 // starting with getting tagtype
1001 TagTypeUL_t tagtype
= GetHF14AMfU_Type();
1002 if (tagtype
== UL_ERROR
) return -1;
1004 while(param_getchar(Cmd
, cmdp
) != 0x00)
1006 switch(param_getchar(Cmd
, cmdp
))
1010 return usage_hf_mfu_rdbl();
1013 // EV1/NTAG size key
1014 keylen
= param_gethex(Cmd
, cmdp
+1, data
, 8);
1016 memcpy(authenticationkey
, data
, 4);
1022 keylen
= param_gethex(Cmd
, cmdp
+1, data
, 32);
1024 memcpy(authenticationkey
, data
, 16);
1029 PrintAndLog("\nERROR: Key is incorrect length\n");
1034 blockNo
= param_get8(Cmd
, cmdp
+1);
1036 uint8_t maxblockno
= 0;
1037 for (uint8_t idx
= 0; idx
< MAX_UL_TYPES
; idx
++){
1038 if (tagtype
& UL_TYPES_ARRAY
[idx
])
1039 maxblockno
= UL_MEMORY_ARRAY
[idx
];
1043 PrintAndLog("Wrong block number");
1046 if (blockNo
> maxblockno
){
1047 PrintAndLog("block number to large. Max block is %u/0x%02X \n", maxblockno
,maxblockno
);
1058 PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd
, cmdp
));
1063 if(errors
) return usage_hf_mfu_rdbl();
1066 if ( blockNo
== -1 ) return usage_hf_mfu_rdbl();
1069 if (swapEndian
&& hasAuthKey
) authKeyPtr
= SwapEndian64(authenticationkey
, 16, 8);
1070 if (swapEndian
&& hasPwdKey
) authKeyPtr
= SwapEndian64(authenticationkey
, 4, 4);
1073 UsbCommand c
= {CMD_MIFAREU_READBL
, {blockNo
}};
1076 memcpy(c
.d
.asBytes
,authKeyPtr
,16);
1078 else if ( hasPwdKey
) {
1080 memcpy(c
.d
.asBytes
,authKeyPtr
,4);
1083 clearCommandBuffer();
1086 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1500)) {
1087 uint8_t isOK
= resp
.arg
[0] & 0xff;
1089 uint8_t *data
= resp
.d
.asBytes
;
1090 PrintAndLog("\nBlock# | Data | Ascii");
1091 PrintAndLog("-----------------------------");
1092 PrintAndLog("%02d/0x%02X | %s| %.4s\n", blockNo
, blockNo
, sprint_hex(data
, 4), data
);
1095 PrintAndLog("Failed reading block: (%02x)", isOK
);
1098 PrintAndLog("Command execute time-out");
1103 int usage_hf_mfu_info(void) {
1104 PrintAndLog("It gathers information about the tag and tries to detect what kind it is.");
1105 PrintAndLog("Sometimes the tags are locked down, and you may need a key to be able to read the information");
1106 PrintAndLog("The following tags can be identified:\n");
1107 PrintAndLog("Ultralight, Ultralight-C, Ultralight EV1, NTAG 203, NTAG 210,");
1108 PrintAndLog("NTAG 212, NTAG 213, NTAG 215, NTAG 216, NTAG I2C 1K & 2K");
1109 PrintAndLog("my-d, my-d NFC, my-d move, my-d move NFC\n");
1110 PrintAndLog("Usage: hf mfu info k <key> l");
1111 PrintAndLog(" Options : ");
1112 PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
1113 PrintAndLog(" l : (optional) swap entered key's endianness");
1115 PrintAndLog(" sample : hf mfu info");
1116 PrintAndLog(" : hf mfu info k 00112233445566778899AABBCCDDEEFF");
1117 PrintAndLog(" : hf mfu info k AABBCCDDD");
1121 int usage_hf_mfu_dump(void) {
1122 PrintAndLog("Reads all pages from Ultralight, Ultralight-C, Ultralight EV1");
1123 PrintAndLog("NTAG 203, NTAG 210, NTAG 212, NTAG 213, NTAG 215, NTAG 216");
1124 PrintAndLog("and saves binary dump into the file `filename.bin` or `cardUID.bin`");
1125 PrintAndLog("It autodetects card type.\n");
1126 PrintAndLog("Usage: hf mfu dump k <key> l n <filename w/o .bin>");
1127 PrintAndLog(" Options : ");
1128 PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
1129 PrintAndLog(" l : (optional) swap entered key's endianness");
1130 PrintAndLog(" n <FN > : filename w/o .bin to save the dump as");
1131 PrintAndLog(" p <Pg > : starting Page number to manually set a page to start the dump at");
1132 PrintAndLog(" q <qty> : number of Pages to manually set how many pages to dump");
1135 PrintAndLog(" sample : hf mfu dump");
1136 PrintAndLog(" : hf mfu dump n myfile");
1137 PrintAndLog(" : hf mfu dump k 00112233445566778899AABBCCDDEEFF");
1138 PrintAndLog(" : hf mfu dump k AABBCCDDD\n");
1142 int usage_hf_mfu_rdbl(void) {
1143 PrintAndLog("Read a block and print. It autodetects card type.\n");
1144 PrintAndLog("Usage: hf mfu rdbl b <block number> k <key> l\n");
1145 PrintAndLog(" Options:");
1146 PrintAndLog(" b <no> : block to read");
1147 PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
1148 PrintAndLog(" l : (optional) swap entered key's endianness");
1150 PrintAndLog(" sample : hf mfu rdbl b 0");
1151 PrintAndLog(" : hf mfu rdbl b 0 k 00112233445566778899AABBCCDDEEFF");
1152 PrintAndLog(" : hf mfu rdbl b 0 k AABBCCDDD\n");
1156 int usage_hf_mfu_wrbl(void) {
1157 PrintAndLog("Write a block. It autodetects card type.\n");
1158 PrintAndLog("Usage: hf mfu wrbl b <block number> d <data> k <key> l\n");
1159 PrintAndLog(" Options:");
1160 PrintAndLog(" b <no> : block to write");
1161 PrintAndLog(" d <data> : block data - (8 hex symbols)");
1162 PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
1163 PrintAndLog(" l : (optional) swap entered key's endianness");
1165 PrintAndLog(" sample : hf mfu wrbl b 0 d 01234567");
1166 PrintAndLog(" : hf mfu wrbl b 0 d 01234567 k AABBCCDDD\n");
1171 // Mifare Ultralight / Ultralight-C / Ultralight-EV1
1172 // Read and Dump Card Contents, using auto detection of tag size.
1173 int CmdHF14AMfUDump(const char *Cmd
){
1176 char filename
[FILE_PATH_SIZE
] = {0x00};
1177 char *fnameptr
= filename
;
1178 uint8_t *lockbytes_t
= NULL
;
1179 uint8_t lockbytes
[2] = {0x00};
1180 uint8_t *lockbytes_t2
= NULL
;
1181 uint8_t lockbytes2
[2] = {0x00};
1182 bool bit
[16] = {0x00};
1183 bool bit2
[16] = {0x00};
1184 uint8_t data
[1024] = {0x00};
1185 bool hasAuthKey
= false;
1188 bool tmplockbit
= false;
1189 uint8_t dataLen
= 0;
1191 uint8_t authenticationkey
[16] = {0x00};
1192 uint8_t *authKeyPtr
= authenticationkey
;
1193 size_t fileNlen
= 0;
1194 bool errors
= false;
1195 bool swapEndian
= false;
1196 bool manualPages
= false;
1197 uint8_t startPage
= 0;
1200 while(param_getchar(Cmd
, cmdp
) != 0x00)
1202 switch(param_getchar(Cmd
, cmdp
))
1206 return usage_hf_mfu_dump();
1209 dataLen
= param_getstr(Cmd
, cmdp
+1, tempStr
);
1210 if (dataLen
== 32 || dataLen
== 8) { //ul-c or ev1/ntag key length
1211 errors
= param_gethex(tempStr
, 0, authenticationkey
, dataLen
);
1214 PrintAndLog("\nERROR: Key is incorrect length\n");
1227 fileNlen
= param_getstr(Cmd
, cmdp
+1, filename
);
1228 if (!fileNlen
) errors
= true;
1229 if (fileNlen
> FILE_PATH_SIZE
-5) fileNlen
= FILE_PATH_SIZE
-5;
1234 startPage
= param_get8(Cmd
, cmdp
+1);
1240 Pages
= param_get8(Cmd
, cmdp
+1);
1245 PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd
, cmdp
));
1253 if(errors
) return usage_hf_mfu_dump();
1255 if (swapEndian
&& hasAuthKey
)
1256 authKeyPtr
= SwapEndian64(authenticationkey
, dataLen
, (dataLen
== 16) ? 8 : 4);
1258 TagTypeUL_t tagtype
= GetHF14AMfU_Type();
1259 if (tagtype
== UL_ERROR
) return -1;
1261 if (!manualPages
) //get number of pages to read
1262 for (uint8_t idx
= 0; idx
< MAX_UL_TYPES
; idx
++)
1263 if (tagtype
& UL_TYPES_ARRAY
[idx
])
1264 Pages
= UL_MEMORY_ARRAY
[idx
]+1; //add one as maxblks starts at 0
1266 ul_print_type(tagtype
, 0);
1267 PrintAndLog("Reading tag memory...");
1268 UsbCommand c
= {CMD_MIFAREU_READCARD
, {startPage
,Pages
}};
1271 c
.arg
[2] = 1; //UL_C auth
1273 c
.arg
[2] = 2; //UL_EV1/NTAG auth
1275 memcpy(c
.d
.asBytes
, authKeyPtr
, dataLen
);
1278 clearCommandBuffer();
1281 if (!WaitForResponseTimeout(CMD_ACK
, &resp
,1500)) {
1282 PrintAndLog("Command execute time-out");
1285 if (resp
.arg
[0] != 1) {
1286 PrintAndLog("Failed reading block: (%02x)", i
);
1290 uint32_t startindex
= resp
.arg
[2];
1291 uint32_t bufferSize
= resp
.arg
[1];
1292 if (bufferSize
> sizeof(data
)) {
1293 PrintAndLog("Data exceeded Buffer size!");
1294 bufferSize
= sizeof(data
);
1296 GetFromBigBuf(data
, bufferSize
, startindex
);
1297 WaitForResponse(CMD_ACK
,NULL
);
1299 Pages
= bufferSize
/4;
1303 lockbytes_t
= data
+ 8;
1304 lockbytes
[0] = lockbytes_t
[2];
1305 lockbytes
[1] = lockbytes_t
[3];
1306 for(j
= 0; j
< 16; j
++){
1307 bit
[j
] = lockbytes
[j
/8] & ( 1 <<(7-j
%8));
1310 // Load bottom lockbytes if available
1311 // TODO -- FIGURE OUT LOCK BYTES FOR TO EV1 and/or NTAG
1312 if ( Pages
== 44 ) {
1313 lockbytes_t2
= data
+ (40*4);
1314 lockbytes2
[0] = lockbytes_t2
[2];
1315 lockbytes2
[1] = lockbytes_t2
[3];
1316 for (j
= 0; j
< 16; j
++) {
1317 bit2
[j
] = lockbytes2
[j
/8] & ( 1 <<(7-j
%8));
1321 // add keys to block dump
1324 authKeyPtr
= SwapEndian64(authenticationkey
, dataLen
, (dataLen
== 16) ? 8 : 4);
1326 authKeyPtr
= authenticationkey
;
1329 if (tagtype
& UL_C
){ //add 4 pages
1330 memcpy(data
+ Pages
*4, authKeyPtr
, dataLen
);
1332 } else { // 2nd page from end
1333 memcpy(data
+ (Pages
*4) - 8, authenticationkey
, dataLen
);
1337 PrintAndLog("\nBlock# | Data |lck| Ascii");
1338 PrintAndLog("---------------------------------");
1339 for (i
= 0; i
< Pages
; ++i
) {
1341 PrintAndLog("%02d/0x%02X | %s| | ", i
+startPage
, i
+startPage
, sprint_hex(data
+ i
* 4, 4));
1345 case 3: tmplockbit
= bit
[4]; break;
1346 case 4: tmplockbit
= bit
[3]; break;
1347 case 5: tmplockbit
= bit
[2]; break;
1348 case 6: tmplockbit
= bit
[1]; break;
1349 case 7: tmplockbit
= bit
[0]; break;
1350 case 8: tmplockbit
= bit
[15]; break;
1351 case 9: tmplockbit
= bit
[14]; break;
1352 case 10: tmplockbit
= bit
[13]; break;
1353 case 11: tmplockbit
= bit
[12]; break;
1354 case 12: tmplockbit
= bit
[11]; break;
1355 case 13: tmplockbit
= bit
[10]; break;
1356 case 14: tmplockbit
= bit
[9]; break;
1357 case 15: tmplockbit
= bit
[8]; break;
1361 case 19: tmplockbit
= bit2
[6]; break;
1365 case 23: tmplockbit
= bit2
[5]; break;
1369 case 27: tmplockbit
= bit2
[4]; break;
1373 case 31: tmplockbit
= bit2
[2]; break;
1377 case 35: tmplockbit
= bit2
[1]; break;
1381 case 39: tmplockbit
= bit2
[0]; break;
1382 case 40: tmplockbit
= bit2
[12]; break;
1383 case 41: tmplockbit
= bit2
[11]; break;
1384 case 42: tmplockbit
= bit2
[10]; break; //auth0
1385 case 43: tmplockbit
= bit2
[9]; break; //auth1
1388 PrintAndLog("%02d/0x%02X | %s| %d | %.4s", i
+startPage
, i
+startPage
, sprint_hex(data
+ i
* 4, 4), tmplockbit
, data
+i
*4);
1390 PrintAndLog("---------------------------------");
1392 // user supplied filename?
1394 // UID = data 0-1-2 4-5-6-7 (skips a beat)
1395 sprintf(fnameptr
,"%02X%02X%02X%02X%02X%02X%02X.bin",
1396 data
[0],data
[1], data
[2], data
[4],data
[5],data
[6], data
[7]);
1398 sprintf(fnameptr
+ fileNlen
,".bin");
1401 if ((fout
= fopen(filename
,"wb")) == NULL
) {
1402 PrintAndLog("Could not create file name %s", filename
);
1405 fwrite( data
, 1, Pages
*4, fout
);
1408 PrintAndLog("Dumped %d pages, wrote %d bytes to %s", Pages
, Pages
*4, filename
);
1412 //-------------------------------------------------------------------------------
1413 // Ultralight C Methods
1414 //-------------------------------------------------------------------------------
1417 // Ultralight C Authentication Demo {currently uses hard-coded key}
1419 int CmdHF14AMfucAuth(const char *Cmd
){
1422 bool errors
= false;
1424 char cmdp
= param_getchar(Cmd
, 0);
1426 //Change key to user defined one
1427 if (cmdp
== 'k' || cmdp
== 'K'){
1428 keyNo
= param_get8(Cmd
, 1);
1429 if(keyNo
> KEYS_3DES_COUNT
)
1433 if (cmdp
== 'h' || cmdp
== 'H')
1437 PrintAndLog("Usage: hf mfu cauth k <key number>");
1438 PrintAndLog(" 0 (default): 3DES standard key");
1439 PrintAndLog(" 1 : all 0x00 key");
1440 PrintAndLog(" 2 : 0x00-0x0F key");
1441 PrintAndLog(" 3 : nfc key");
1442 PrintAndLog(" 4 : all 0x01 key");
1443 PrintAndLog(" 5 : all 0xff key");
1444 PrintAndLog(" 6 : 0x00-0xFF key");
1445 PrintAndLog("\n sample : hf mfu cauth k");
1446 PrintAndLog(" : hf mfu cauth k 3");
1450 uint8_t *key
= default_3des_keys
[keyNo
];
1451 if (ulc_authentication(key
, true))
1452 PrintAndLog("Authentication successful. 3des key: %s",sprint_hex(key
, 16));
1454 PrintAndLog("Authentication failed");
1460 A test function to validate that the polarssl-function works the same
1461 was as the openssl-implementation.
1462 Commented out, since it requires openssl
1464 int CmdTestDES(const char * cmd)
1466 uint8_t key[16] = {0x00};
1468 memcpy(key,key3_3des_data,16);
1469 DES_cblock RndA, RndB;
1471 PrintAndLog("----------OpenSSL DES implementation----------");
1473 uint8_t e_RndB[8] = {0x00};
1474 unsigned char RndARndB[16] = {0x00};
1476 DES_cblock iv = { 0 };
1477 DES_key_schedule ks1,ks2;
1478 DES_cblock key1,key2;
1480 memcpy(key,key3_3des_data,16);
1482 memcpy(key2,key+8,8);
1485 DES_set_key((DES_cblock *)key1,&ks1);
1486 DES_set_key((DES_cblock *)key2,&ks2);
1488 DES_random_key(&RndA);
1489 PrintAndLog(" RndA:%s",sprint_hex(RndA, 8));
1490 PrintAndLog(" e_RndB:%s",sprint_hex(e_RndB, 8));
1491 //void DES_ede2_cbc_encrypt(const unsigned char *input,
1492 // unsigned char *output, long length, DES_key_schedule *ks1,
1493 // DES_key_schedule *ks2, DES_cblock *ivec, int enc);
1494 DES_ede2_cbc_encrypt(e_RndB,RndB,sizeof(e_RndB),&ks1,&ks2,&iv,0);
1496 PrintAndLog(" RndB:%s",sprint_hex(RndB, 8));
1498 memcpy(RndARndB,RndA,8);
1499 memcpy(RndARndB+8,RndB,8);
1500 PrintAndLog(" RA+B:%s",sprint_hex(RndARndB, 16));
1501 DES_ede2_cbc_encrypt(RndARndB,RndARndB,sizeof(RndARndB),&ks1,&ks2,&e_RndB,1);
1502 PrintAndLog("enc(RA+B):%s",sprint_hex(RndARndB, 16));
1505 PrintAndLog("----------PolarSSL implementation----------");
1507 uint8_t random_a[8] = { 0 };
1508 uint8_t enc_random_a[8] = { 0 };
1509 uint8_t random_b[8] = { 0 };
1510 uint8_t enc_random_b[8] = { 0 };
1511 uint8_t random_a_and_b[16] = { 0 };
1512 des3_context ctx = { 0 };
1514 memcpy(random_a, RndA,8);
1516 uint8_t output[8] = { 0 };
1517 uint8_t iv[8] = { 0 };
1519 PrintAndLog(" RndA :%s",sprint_hex(random_a, 8));
1520 PrintAndLog(" e_RndB:%s",sprint_hex(enc_random_b, 8));
1522 des3_set2key_dec(&ctx, key);
1524 des3_crypt_cbc(&ctx // des3_context *ctx
1525 , DES_DECRYPT // int mode
1526 , sizeof(random_b) // size_t length
1527 , iv // unsigned char iv[8]
1528 , enc_random_b // const unsigned char *input
1529 , random_b // unsigned char *output
1532 PrintAndLog(" RndB:%s",sprint_hex(random_b, 8));
1535 memcpy(random_a_and_b ,random_a,8);
1536 memcpy(random_a_and_b+8,random_b,8);
1538 PrintAndLog(" RA+B:%s",sprint_hex(random_a_and_b, 16));
1540 des3_set2key_enc(&ctx, key);
1542 des3_crypt_cbc(&ctx // des3_context *ctx
1543 , DES_ENCRYPT // int mode
1544 , sizeof(random_a_and_b) // size_t length
1545 , enc_random_b // unsigned char iv[8]
1546 , random_a_and_b // const unsigned char *input
1547 , random_a_and_b // unsigned char *output
1550 PrintAndLog("enc(RA+B):%s",sprint_hex(random_a_and_b, 16));
1557 // Mifare Ultralight C - Set password
1559 int CmdHF14AMfucSetPwd(const char *Cmd
){
1561 uint8_t pwd
[16] = {0x00};
1563 char cmdp
= param_getchar(Cmd
, 0);
1565 if (strlen(Cmd
) == 0 || cmdp
== 'h' || cmdp
== 'H') {
1566 PrintAndLog("Usage: hf mfu setpwd <password (32 hex symbols)>");
1567 PrintAndLog(" [password] - (32 hex symbols)");
1569 PrintAndLog("sample: hf mfu setpwd 000102030405060708090a0b0c0d0e0f");
1574 if (param_gethex(Cmd
, 0, pwd
, 32)) {
1575 PrintAndLog("Password must include 32 HEX symbols");
1579 UsbCommand c
= {CMD_MIFAREUC_SETPWD
};
1580 memcpy( c
.d
.asBytes
, pwd
, 16);
1581 clearCommandBuffer();
1586 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1500) ) {
1587 if ( (resp
.arg
[0] & 0xff) == 1)
1588 PrintAndLog("Ultralight-C new password: %s", sprint_hex(pwd
,16));
1590 PrintAndLog("Failed writing at block %d", resp
.arg
[1] & 0xff);
1595 PrintAndLog("command execution time out");
1603 // Magic UL / UL-C tags - Set UID
1605 int CmdHF14AMfucSetUid(const char *Cmd
){
1609 uint8_t uid
[7] = {0x00};
1610 char cmdp
= param_getchar(Cmd
, 0);
1612 if (strlen(Cmd
) == 0 || cmdp
== 'h' || cmdp
== 'H') {
1613 PrintAndLog("Usage: hf mfu setuid <uid (14 hex symbols)>");
1614 PrintAndLog(" [uid] - (14 hex symbols)");
1615 PrintAndLog("\nThis only works for Magic Ultralight tags.");
1617 PrintAndLog("sample: hf mfu setuid 11223344556677");
1622 if (param_gethex(Cmd
, 0, uid
, 14)) {
1623 PrintAndLog("UID must include 14 HEX symbols");
1628 c
.cmd
= CMD_MIFAREU_READBL
;
1630 clearCommandBuffer();
1632 if (!WaitForResponseTimeout(CMD_ACK
,&resp
,1500)) {
1633 PrintAndLog("Command execute timeout");
1638 uint8_t oldblock2
[4] = {0x00};
1639 memcpy(resp
.d
.asBytes
, oldblock2
, 4);
1642 c
.cmd
= CMD_MIFAREU_WRITEBL
;
1644 c
.d
.asBytes
[0] = uid
[0];
1645 c
.d
.asBytes
[1] = uid
[1];
1646 c
.d
.asBytes
[2] = uid
[2];
1647 c
.d
.asBytes
[3] = 0x88 ^ uid
[0] ^ uid
[1] ^ uid
[2];
1648 clearCommandBuffer();
1650 if (!WaitForResponseTimeout(CMD_ACK
,&resp
,1500)) {
1651 PrintAndLog("Command execute timeout");
1657 c
.d
.asBytes
[0] = uid
[3];
1658 c
.d
.asBytes
[1] = uid
[4];
1659 c
.d
.asBytes
[2] = uid
[5];
1660 c
.d
.asBytes
[3] = uid
[6];
1661 clearCommandBuffer();
1663 if (!WaitForResponseTimeout(CMD_ACK
,&resp
,1500) ) {
1664 PrintAndLog("Command execute timeout");
1670 c
.d
.asBytes
[0] = uid
[3] ^ uid
[4] ^ uid
[5] ^ uid
[6];
1671 c
.d
.asBytes
[1] = oldblock2
[1];
1672 c
.d
.asBytes
[2] = oldblock2
[2];
1673 c
.d
.asBytes
[3] = oldblock2
[3];
1674 clearCommandBuffer();
1676 if (!WaitForResponseTimeout(CMD_ACK
,&resp
,1500) ) {
1677 PrintAndLog("Command execute timeout");
1684 int CmdHF14AMfuGenDiverseKeys(const char *Cmd
){
1686 uint8_t iv
[8] = { 0x00 };
1687 uint8_t block
= 0x07;
1690 //04 57 b6 e2 05 3f 80 UID
1692 uint8_t uid
[] = { 0xF4,0xEA, 0x54, 0x8E };
1693 uint8_t mifarekeyA
[] = { 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5 };
1694 uint8_t mifarekeyB
[] = { 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5 };
1695 uint8_t dkeyA
[8] = { 0x00 };
1696 uint8_t dkeyB
[8] = { 0x00 };
1698 uint8_t masterkey
[] = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xaa,0xbb,0xcc,0xdd,0xee,0xff };
1700 uint8_t mix
[8] = { 0x00 };
1701 uint8_t divkey
[8] = { 0x00 };
1703 memcpy(mix
, mifarekeyA
, 4);
1705 mix
[4] = mifarekeyA
[4] ^ uid
[0];
1706 mix
[5] = mifarekeyA
[5] ^ uid
[1];
1707 mix
[6] = block
^ uid
[2];
1710 des3_context ctx
= { 0x00 };
1711 des3_set2key_enc(&ctx
, masterkey
);
1713 des3_crypt_cbc(&ctx
// des3_context
1714 , DES_ENCRYPT
// int mode
1715 , sizeof(mix
) // length
1721 PrintAndLog("3DES version");
1722 PrintAndLog("Masterkey :\t %s", sprint_hex(masterkey
,sizeof(masterkey
)));
1723 PrintAndLog("UID :\t %s", sprint_hex(uid
, sizeof(uid
)));
1724 PrintAndLog("Sector :\t %0d", block
);
1725 PrintAndLog("Mifare key :\t %s", sprint_hex(mifarekeyA
, sizeof(mifarekeyA
)));
1726 PrintAndLog("Message :\t %s", sprint_hex(mix
, sizeof(mix
)));
1727 PrintAndLog("Diversified key: %s", sprint_hex(divkey
+1, 6));
1729 PrintAndLog("\n DES version");
1731 for (int i
=0; i
< sizeof(mifarekeyA
); ++i
){
1732 dkeyA
[i
] = (mifarekeyA
[i
] << 1) & 0xff;
1733 dkeyA
[6] |= ((mifarekeyA
[i
] >> 7) & 1) << (i
+1);
1736 for (int i
=0; i
< sizeof(mifarekeyB
); ++i
){
1737 dkeyB
[1] |= ((mifarekeyB
[i
] >> 7) & 1) << (i
+1);
1738 dkeyB
[2+i
] = (mifarekeyB
[i
] << 1) & 0xff;
1741 uint8_t zeros
[8] = {0x00};
1742 uint8_t newpwd
[8] = {0x00};
1743 uint8_t dmkey
[24] = {0x00};
1744 memcpy(dmkey
, dkeyA
, 8);
1745 memcpy(dmkey
+8, dkeyB
, 8);
1746 memcpy(dmkey
+16, dkeyA
, 8);
1747 memset(iv
, 0x00, 8);
1749 des3_set3key_enc(&ctx
, dmkey
);
1751 des3_crypt_cbc(&ctx
// des3_context
1752 , DES_ENCRYPT
// int mode
1753 , sizeof(newpwd
) // length
1759 PrintAndLog("Mifare dkeyA :\t %s", sprint_hex(dkeyA
, sizeof(dkeyA
)));
1760 PrintAndLog("Mifare dkeyB :\t %s", sprint_hex(dkeyB
, sizeof(dkeyB
)));
1761 PrintAndLog("Mifare ABA :\t %s", sprint_hex(dmkey
, sizeof(dmkey
)));
1762 PrintAndLog("Mifare Pwd :\t %s", sprint_hex(newpwd
, sizeof(newpwd
)));
1767 // static uint8_t * diversify_key(uint8_t * key){
1769 // for(int i=0; i<16; i++){
1770 // if(i<=6) key[i]^=cuid[i];
1771 // if(i>6) key[i]^=cuid[i%7];
1776 // static void GenerateUIDe( uint8_t *uid, uint8_t len){
1777 // for (int i=0; i<len; ++i){
1783 //------------------------------------
1785 //------------------------------------
1786 static command_t CommandTable
[] =
1788 {"help", CmdHelp
, 1, "This help"},
1789 {"dbg", CmdHF14AMfDbg
, 0, "Set default debug mode"},
1790 {"info", CmdHF14AMfUInfo
, 0, "Tag information"},
1791 {"dump", CmdHF14AMfUDump
, 0, "Dump Ultralight / Ultralight-C / NTAG tag to binary file"},
1792 {"rdbl", CmdHF14AMfURdBl
, 0, "Read block"},
1793 {"wrbl", CmdHF14AMfUWrBl
, 0, "Write block"},
1794 {"cauth", CmdHF14AMfucAuth
, 0, "Authentication - Ultralight C"},
1795 {"setpwd", CmdHF14AMfucSetPwd
, 1, "Set 3des password - Ultralight-C"},
1796 {"setuid", CmdHF14AMfucSetUid
, 1, "Set UID - MAGIC tags only"},
1797 {"gen", CmdHF14AMfuGenDiverseKeys
, 1, "Generate 3des mifare diversified keys"},
1798 {NULL
, NULL
, 0, NULL
}
1801 int CmdHFMFUltra(const char *Cmd
){
1802 WaitForResponseTimeout(CMD_ACK
,NULL
,100);
1803 CmdsParse(CommandTable
, Cmd
);
1807 int CmdHelp(const char *Cmd
){
1808 CmdsHelp(CommandTable
);