cvs.zerfleddert.de Git - proxmark3-svn/blob - armsrc/mifaredesfire.c

   1 #include "mifaredesfire.h"
   2
   3 #define MAX_APPLICATION_COUNT 28
   4 #define MAX_FILE_COUNT 16
   5 #define MAX_FRAME_SIZE 60
   6 #define NOT_YET_AUTHENTICATED 255
   7 #define FRAME_PAYLOAD_SIZE (MAX_FRAME_SIZE - 5)
   8
   9 // the block number for the ISO14443-4 PCB
  10 uint8_t pcb_blocknum = 0;
  11 // Deselect card by sending a s-block. the crc is precalced for speed
  12 static  uint8_t deselect_cmd[] = {0xc2,0xe0,0xb4};
  13
  14 //static uint8_t __msg[MAX_FRAME_SIZE] = { 0x0A, 0x00, 0x00, /* ..., */ 0x00 };
  15 /*                                       PCB   CID   CMD    PAYLOAD    */
  16 //static uint8_t __res[MAX_FRAME_SIZE];
  17
  18 bool InitDesfireCard(){
  19
  20         // Make sure it is off.
  21 //      FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
  22 //      SpinDelay(300);
  23
  24         byte_t cardbuf[USB_CMD_DATA_SIZE];
  25         memset(cardbuf,0,sizeof(cardbuf));
  26
  27         iso14a_set_tracing(TRUE);
  28         iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
  29
  30         iso14a_card_select_t *card = (iso14a_card_select_t*)cardbuf;
  31         int len = iso14443a_select_card(NULL,card,NULL);
  32
  33         if (!len) {
  34                 if (MF_DBGLEVEL >= 1) {
  35                         Dbprintf("Can't select card");
  36                 }
  37                 OnError();
  38                 return false;
  39         }
  40         return true;
  41 }
  42
  43 // ARG0 flag enums
  44 enum  {
  45  NONE           =       0x00,
  46  INIT           =       0x01,
  47  DISCONNECT =   0x02,
  48  CLEARTRACE     =       0x04,
  49  BAR            =       0x08,
  50 } CmdOptions ;
  51
  52 void MifareSendCommand(uint8_t arg0, uint8_t arg1, uint8_t *datain){
  53
  54         /* ARG0 contains flags.
  55                 0x01 = init card.
  56                 0x02 = Disconnect
  57                 0x03
  58         */
  59         uint8_t flags = arg0;
  60         size_t datalen = arg1;
  61         uint8_t resp[RECV_RES_SIZE];
  62         memset(resp,0,sizeof(resp));
  63
  64         if (MF_DBGLEVEL >= 4) {
  65                 Dbprintf(" flags : %02X", flags);
  66                 Dbprintf(" len   : %02X", datalen);
  67                 print_result(" RX    : ", datain, datalen);
  68         }
  69
  70         if ( flags & CLEARTRACE ){
  71                 iso14a_clear_trace();
  72         }
  73
  74         if ( flags & INIT ){
  75                 if ( !InitDesfireCard() )
  76                         return;
  77         }
  78
  79         int len = DesfireAPDU(datain, datalen, resp);
  80                 if (MF_DBGLEVEL >= 4) {
  81                         print_result("ERR <--: ", resp, len);
  82                 }
  83
  84         if ( !len ) {
  85                 OnError();
  86                 return;
  87         }
  88
  89         // reset the pcb_blocknum,
  90         pcb_blocknum = 0;
  91
  92         if ( flags & DISCONNECT ){
  93                 OnSuccess();
  94         }
  95
  96         cmd_send(CMD_ACK,1,len,0,resp,len);
  97 }
  98
  99 void MifareDesfireGetInformation(){
 100
 101         int len = 0;
 102         uint8_t resp[USB_CMD_DATA_SIZE];
 103         uint8_t dataout[USB_CMD_DATA_SIZE];
 104         byte_t cardbuf[USB_CMD_DATA_SIZE];
 105
 106         memset(resp,0,sizeof(resp));
 107         memset(dataout,0, sizeof(dataout));
 108         memset(cardbuf,0,sizeof(cardbuf));
 109
 110         /*
 111                 1 = PCB                                 1
 112                 2 = cid                                 2
 113                 3 = desfire command             3
 114                 4-5 = crc                               4  key
 115                                                                 5-6 crc
 116                 PCB == 0x0A because sending CID byte.
 117                 CID == 0x00 first card?
 118         */
 119         iso14a_clear_trace();
 120         iso14a_set_tracing(TRUE);
 121         iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 122
 123         // card select - information
 124         iso14a_card_select_t *card = (iso14a_card_select_t*)cardbuf;
 125         byte_t isOK = iso14443a_select_card(NULL, card, NULL);
 126         if (isOK != 1) {
 127                 if (MF_DBGLEVEL >= 1) {
 128                         Dbprintf("Can't select card");
 129                 }
 130                 OnError();
 131                 return;
 132         }
 133
 134         memcpy(dataout,card->uid,7);
 135
 136         LED_A_ON();
 137         LED_B_OFF();
 138         LED_C_OFF();
 139
 140         uint8_t cmd[] = {GET_VERSION};
 141         size_t cmd_len = sizeof(cmd);
 142
 143         len =  DesfireAPDU(cmd, cmd_len, resp);
 144         if ( !len ) {
 145                 print_result("ERROR <--: ", resp, len);
 146                 OnError();
 147                 return;
 148         }
 149
 150         LED_A_OFF();
 151         LED_B_ON();
 152         memcpy(dataout+7,resp+3,7);
 153
 154         // ADDITION_FRAME 1
 155         cmd[0] = ADDITIONAL_FRAME;
 156         len =  DesfireAPDU(cmd, cmd_len, resp);
 157         if ( !len ) {
 158                 print_result("ERROR <--: ", resp, len);
 159                 OnError();
 160                 return;
 161         }
 162
 163         LED_B_OFF();
 164         LED_C_ON();
 165         memcpy(dataout+7+7,resp+3,7);
 166
 167         // ADDITION_FRAME 2
 168         len =  DesfireAPDU(cmd, cmd_len, resp);
 169         if ( !len ) {
 170                 print_result("ERROR <--: ", resp, len);
 171                 OnError();
 172                 return;
 173         }
 174
 175         memcpy(dataout+7+7+7,resp+3,14);
 176
 177         cmd_send(CMD_ACK,1,0,0,dataout,sizeof(dataout));
 178
 179         // reset the pcb_blocknum,
 180         pcb_blocknum = 0;
 181         OnSuccess();
 182 }
 183
 184 void MifareDES_Auth1(uint8_t mode, uint8_t algo, uint8_t keyno,  uint8_t *datain){
 185
 186         int len = 0;
 187         //uint8_t PICC_MASTER_KEY8[8] = { 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47};
 188         uint8_t PICC_MASTER_KEY16[16] = { 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f };
 189         //uint8_t null_key_data8[8] = {0x00};
 190         //uint8_t null_key_data16[16] = {0x00};
 191         //uint8_t new_key_data8[8]  = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77};
 192         //uint8_t new_key_data16[16]  = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF};
 193
 194         //uint8_t* bigbuffer = mifare_get_bigbufptr();
 195         uint8_t resp[256] = {0x00};
 196         uint8_t IV[16] = {0x00};
 197
 198         size_t datalen = datain[0];
 199
 200         uint8_t cmd[40] = {0x00};
 201         uint8_t encRndB[16] = {0x00};
 202         uint8_t decRndB[16] = {0x00};
 203         uint8_t nonce[16] = {0x00};
 204         uint8_t both[32] = {0x00};
 205         uint8_t encBoth[32] = {0x00};
 206
 207         InitDesfireCard();
 208
 209         LED_A_ON();
 210         LED_B_OFF();
 211         LED_C_OFF();
 212
 213         // 3 olika sätt att authenticera.   AUTH (CRC16) , AUTH_ISO (CRC32) , AUTH_AES (CRC32)
 214         // 4 olika crypto algo   DES, 3DES, 3K3DES, AES
 215         // 3 olika kommunikations sätt,   PLAIN,MAC,CRYPTO
 216
 217         // des, nyckel 0,
 218         switch (mode){
 219                 case 1:
 220                         // if ( SendDesfireCommand(AUTHENTICATE, &keyno, resp) > 0 ){
 221                                 // // fick nonce från kortet
 222                         // }
 223                         break;
 224                 case 2:
 225                         //SendDesfireCommand(AUTHENTICATE_ISO, &keyno, resp);
 226                         break;
 227                 case 3:{
 228
 229                         //defaultkey
 230                         uint8_t keybytes[16];
 231                         if (datain[1] == 0xff){
 232                                 memcpy(keybytes,PICC_MASTER_KEY16,16);
 233                         } else{
 234                                 memcpy(keybytes, datain+1, datalen);
 235                         }
 236
 237                         struct desfire_key defaultkey = {0};
 238                         desfirekey_t key = &defaultkey;
 239                         Desfire_aes_key_new( keybytes, key);
 240
 241                         AesCtx ctx;
 242                         if ( AesCtxIni(&ctx, IV, key->data, KEY128, CBC) < 0 ){
 243                                 if( MF_DBGLEVEL >= 4) {
 244                                         Dbprintf("AES context failed to init");
 245                                 }
 246                                 OnError();
 247                                 return;
 248                         }
 249
 250                         cmd[0] = AUTHENTICATE_AES;
 251                         cmd[1] = 0x00;  //keynumber
 252                         len = DesfireAPDU(cmd, 2, resp);
 253                         if ( !len ) {
 254                                 if (MF_DBGLEVEL >= 1) {
 255                                         DbpString("Authentication failed. Card timeout.");
 256                                 }
 257                                 OnError();
 258                                 return;
 259                         }
 260
 261                         memcpy( encRndB, resp+3, 16);
 262
 263                         // dekryptera tagnonce.
 264                         AesDecrypt(&ctx, encRndB, decRndB, 16);
 265                         rol(decRndB,16);
 266                         memcpy(both, nonce,16);
 267                         memcpy(both+16, decRndB ,16 );
 268                         AesEncrypt(&ctx, both, encBoth, 32 );
 269
 270                         cmd[0] = ADDITIONAL_FRAME;
 271                         memcpy(cmd+1, encBoth, 32 );
 272
 273                         len = DesfireAPDU(cmd, 33, resp);  // 1 + 32 == 33
 274                         if ( !len ) {
 275                                 if (MF_DBGLEVEL >= 1) {
 276                                         DbpString("Authentication failed. Card timeout.");
 277                                 }
 278                 OnError();
 279                                 return;
 280                         }
 281
 282                         if ( resp[2] == 0x00 ){
 283                                 // Create AES Session key
 284                                 struct desfire_key sessionKey = {0};
 285                                 desfirekey_t skey = &sessionKey;
 286                                 Desfire_session_key_new( nonce, decRndB , key, skey );
 287                                 print_result("SESSION : ", skey->data, 16);
 288                         } else {
 289                                 DbpString("Authetication failed.");
 290                                 OnError();
 291                                 return;
 292                         }
 293
 294                         break;
 295                 }
 296         }
 297
 298         OnSuccess();
 299         cmd_send(CMD_ACK,1,len,0,resp,len);
 300 }
 301
 302 // 3 olika ISO sätt att skicka data till DESFIRE (direkt, inkapslat, inkapslat ISO)
 303 // cmd  =  cmd bytes to send
 304 // cmd_len = length of cmd
 305 // dataout = pointer to response data array
 306 int DesfireAPDU(uint8_t *cmd, size_t cmd_len, uint8_t *dataout){
 307
 308         uint32_t status = 0;
 309         size_t wrappedLen = 0;
 310         uint8_t wCmd[USB_CMD_DATA_SIZE] = {0};
 311
 312         wrappedLen = CreateAPDU( cmd, cmd_len, wCmd);
 313
 314         if (MF_DBGLEVEL >= 4) {
 315                 print_result("WCMD <--: ", wCmd, wrappedLen);
 316         }
 317         ReaderTransmit( wCmd, wrappedLen, NULL);
 318
 319         status = ReaderReceive(dataout);
 320
 321         if( status == 0x00){
 322                 if (MF_DBGLEVEL >= 4) {
 323                         Dbprintf("fukked");
 324                 }
 325                 return FALSE; //DATA LINK ERROR
 326         }
 327         // if we received an I- or R(ACK)-Block with a block number equal to the
 328         // current block number, toggle the current block number
 329         else if (status >= 4 // PCB+CID+CRC = 4 bytes
 330                  && ((dataout[0] & 0xC0) == 0 // I-Block
 331                      || (dataout[0] & 0xD0) == 0x80) // R-Block with ACK bit set to 0
 332                  && (dataout[0] & 0x01) == pcb_blocknum) // equal block numbers
 333         {
 334                 pcb_blocknum ^= 1;  //toggle next block
 335         }
 336         return status;
 337 }
 338
 339 // CreateAPDU
 340 size_t CreateAPDU( uint8_t *datain, size_t len, uint8_t *dataout){
 341
 342         size_t cmdlen = MIN(len+4, USB_CMD_DATA_SIZE-1);
 343
 344         uint8_t cmd[cmdlen];
 345         memset(cmd, 0, cmdlen);
 346
 347         cmd[0] = 0x0A;  //  0x0A = skicka cid,  0x02 = ingen cid. Särskilda bitar //
 348         cmd[0] |= pcb_blocknum; // OR the block number into the PCB
 349         cmd[1] = 0x00;  //  CID: 0x00 //FIXME: allow multiple selected cards
 350
 351         memcpy(cmd+2, datain, len);
 352         AppendCrc14443a(cmd, len+2);
 353
 354         memcpy(dataout, cmd, cmdlen);
 355
 356         return cmdlen;
 357 }
 358
 359         // crc_update(&desfire_crc32, 0, 1); /* CMD_WRITE */
 360         // crc_update(&desfire_crc32, addr, addr_sz);
 361         // crc_update(&desfire_crc32, byte, 8);
 362         // uint32_t crc = crc_finish(&desfire_crc32);
 363
 364 void OnSuccess(){
 365         pcb_blocknum = 0;
 366         ReaderTransmit(deselect_cmd, 3 , NULL);
 367         FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 368         LEDsoff();
 369 }
 370
 371 void OnError(){
 372         pcb_blocknum = 0;
 373         ReaderTransmit(deselect_cmd, 3 , NULL);
 374         FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 375         cmd_send(CMD_ACK,0,0,0,0,0);
 376         LEDsoff();
 377 }