// Set up the synchronous serial port, with the one set of options that we
// always use when we are talking to the FPGA. Both RX and TX are enabled.
//-----------------------------------------------------------------------------
-void FpgaSetupSsc(void)
-{
+void FpgaSetupSscExt(uint8_t clearPCER) {
// First configure the GPIOs, and get ourselves a clock.
AT91C_BASE_PIOA->PIO_ASR =
GPIO_SSC_FRAME |
GPIO_SSC_CLK;
AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
- AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_SSC);
+ if ( clearPCER )
+ AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_SSC);
+ else
+ AT91C_BASE_PMC->PMC_PCER |= (1 << AT91C_ID_SSC);
// Now set up the SSC proper, starting from a known state.
AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;
}
-
+void FpgaSetupSsc(void) {
+ FpgaSetupSscExt(TRUE);
+}
//-----------------------------------------------------------------------------
// Set up DMA to receive samples from the FPGA. We will use the PDC, with
// a single buffer as a circular buffer (so that we just chain back to
// ourselves, not to another buffer). The stuff to manipulate those buffers
// is in apps.h, because it should be inlined, for speed.
//-----------------------------------------------------------------------------
-bool FpgaSetupSscDma(uint8_t *buf, int len)
-{
- if (buf == NULL) {
- return false;
- }
-
+bool FpgaSetupSscDma(uint8_t *buf, int len) {
+ if (buf == NULL) return false;
+
AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; // Disable DMA Transfer
AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf; // transfer to this memory address
AT91C_BASE_PDC_SSC->PDC_RCR = len; // transfer this many bytes
AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf; // next transfer to same memory address
AT91C_BASE_PDC_SSC->PDC_RNCR = len; // ... with same number of bytes
- AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go!
-
+ AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go!
return true;
}
compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN;
fpga_image_ptr = output_buffer;
int res = inflate(compressed_fpga_stream, Z_SYNC_FLUSH);
- if (res != Z_OK) {
+
+ if (res != Z_OK)
Dbprintf("inflate returned: %d, %s", res, compressed_fpga_stream->msg);
- }
- if (res < 0) {
+
+ if (res < 0)
return res;
- }
}
- uncompressed_bytes_cnt++;
+ ++uncompressed_bytes_cnt;
return *fpga_image_ptr++;
}
get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer);
}
- return get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer);
-
+ return get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer);
}
static void fpga_inflate_free(voidpf opaque, voidpf address)
{
- BigBuf_free();
+ // free eventually allocated BigBuf memory
+ BigBuf_free(); BigBuf_Clear_ext(false);
}
fpga_image_ptr = output_buffer;
- for (uint16_t i = 0; i < FPGA_BITSTREAM_FIXED_HEADER_SIZE; i++) {
+ for (uint16_t i = 0; i < FPGA_BITSTREAM_FIXED_HEADER_SIZE; i++)
header[i] = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
- }
// Check for a valid .bit file (starts with _bitparse_fixed_header)
- if(memcmp(_bitparse_fixed_header, header, FPGA_BITSTREAM_FIXED_HEADER_SIZE) == 0) {
+ if(memcmp(_bitparse_fixed_header, header, FPGA_BITSTREAM_FIXED_HEADER_SIZE) == 0)
return true;
- } else {
- return false;
- }
+
+ return false;
}
void FpgaDownloadAndGo(int bitstream_version)
{
z_stream compressed_fpga_stream;
- uint8_t output_buffer[OUTPUT_BUFFER_LEN];
+ uint8_t output_buffer[OUTPUT_BUFFER_LEN] = {0x00};
// check whether or not the bitstream is already loaded
if (downloaded_bitstream == bitstream_version)
return;
// make sure that we have enough memory to decompress
- BigBuf_free();
+ BigBuf_free(); BigBuf_Clear_ext(false);
if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer)) {
return;
inflateEnd(&compressed_fpga_stream);
- BigBuf_free();
+ // free eventually allocated BigBuf memory
+ BigBuf_free(); BigBuf_Clear_ext(false);
}
void FpgaGatherVersion(int bitstream_version, char *dst, int len)
{
unsigned int fpga_info_len;
- char tempstr[40];
+ char tempstr[40] = {0x00};
z_stream compressed_fpga_stream;
- uint8_t output_buffer[OUTPUT_BUFFER_LEN];
+ uint8_t output_buffer[OUTPUT_BUFFER_LEN] = {0x00};
dst[0] = '\0';
// ensure that we can allocate enough memory for decompression:
- BigBuf_free();
+ BigBuf_free(); BigBuf_Clear_ext(false);
- if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer)) {
+ if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer))
return;
- }
if(bitparse_find_section(bitstream_version, 'a', &fpga_info_len, &compressed_fpga_stream, output_buffer)) {
for (uint16_t i = 0; i < fpga_info_len; i++) {