#include "cmdhflegic.h"
#include "cmdhficlass.h"
#include "cmdhfmf.h"
+#include "cmdhfmfu.h"
+#include "cmdhfmfdes.h"
+#include "cmdhftopaz.h"
+#include "protocols.h"
static int CmdHelp(const char *Cmd);
-int CmdHFTune(const char *Cmd)
-{
- UsbCommand c={CMD_MEASURE_ANTENNA_TUNING_HF};
- SendCommand(&c);
- return 0;
+int CmdHFTune(const char *Cmd) {
+ PrintAndLog("Measuring HF antenna, press button to exit");
+ UsbCommand c = {CMD_MEASURE_ANTENNA_TUNING_HF};
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
}
-// for the time being. Need better Bigbuf handling.
-#define TRACE_SIZE 3000
-
-//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
-/*
-ISO14443A (usually NFC tags)
- 26 (7bits) = REQA
- 30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
- A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
- 52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
- 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
- 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
- 95 20 = Anticollision of cascade level2
- 95 70 = Select of cascade level2
- 50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
-Mifare
- 60 = Authenticate with KeyA
- 61 = Authenticate with KeyB
- 40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
- C0 = Decrement
- C1 = Increment
- C2 = Restore
- B0 = Transfer
-Ultralight C
- A0 = Compatibility Write (to accomodate MIFARE commands)
- 1A = Step1 Authenticate
- AF = Step2 Authenticate
-
-
-ISO14443B
- 05 = REQB
- 1D = ATTRIB
- 50 = HALT
-SRIX4K (tag does not respond to 05)
- 06 00 = INITIATE
- 0E xx = SELECT ID (xx = Chip-ID)
- 0B = Get UID
- 08 yy = Read Block (yy = block number)
- 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
- 0C = Reset to Inventory
- 0F = Completion
- 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
-
-
-ISO15693
- MANDATORY COMMANDS (all ISO15693 tags must support those)
- 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
- 02 = Stay Quiet
- OPTIONAL COMMANDS (not all tags support them)
- 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
- 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
- 22 = Lock Block
- 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
- 25 = Select
- 26 = Reset to Ready
- 27 = Write AFI
- 28 = Lock AFI
- 29 = Write DSFID
- 2A = Lock DSFID
- 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
- 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)
-
-EM Microelectronic CUSTOM COMMANDS
- A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
- A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
- B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
- E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
-NXP/Philips CUSTOM COMMANDS
- A0 = Inventory Read
- A1 = Fast Inventory Read
- A2 = Set EAS
- A3 = Reset EAS
- A4 = Lock EAS
- A5 = EAS Alarm
- A6 = Password Protect EAS
- A7 = Write EAS ID
- A8 = Read EPC
- B0 = Inventory Page Read
- B1 = Fast Inventory Page Read
- B2 = Get Random Number
- B3 = Set Password
- B4 = Write Password
- B5 = Lock Password
- B6 = Bit Password Protection
- B7 = Lock Page Protection Condition
- B8 = Get Multiple Block Protection Status
- B9 = Destroy SLI
- BA = Enable Privacy
- BB = 64bit Password Protection
- 40 = Long Range CMD (Standard ISO/TR7003:1990)
- */
-
-#define ICLASS_CMD_ACTALL 0x0A
-#define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
-#define ICLASS_CMD_SELECT 0x81
-#define ICLASS_CMD_PAGESEL 0x84
-#define ICLASS_CMD_READCHECK 0x88
-#define ICLASS_CMD_CHECK 0x05
-#define ICLASS_CMD_SOF 0x0F
-#define ICLASS_CMD_HALT 0x00
-
-#define ISO14443_CMD_REQA 0x26
-#define ISO14443_CMD_READBLOCK 0x30
-#define ISO14443_CMD_WUPA 0x52
-#define ISO14443_CMD_ANTICOLL_OR_SELECT 0x93
-#define ISO14443_CMD_ANTICOLL_OR_SELECT_2 0x95
-#define ISO14443_CMD_WRITEBLOCK 0xA0 // or 0xA2 ?
-#define ISO14443_CMD_HALT 0x50
-#define ISO14443_CMD_RATS 0xE0
-
-#define MIFARE_AUTH_KEYA 0x60
-#define MIFARE_AUTH_KEYB 0x61
-#define MIFARE_MAGICMODE 0x40
-#define MIFARE_CMD_INC 0xC0
-#define MIFARE_CMD_DEC 0xC1
-#define MIFARE_CMD_RESTORE 0xC2
-#define MIFARE_CMD_TRANSFER 0xB0
-
-#define MIFARE_ULC_WRITE 0xA0
-#define MIFARE_ULC_AUTH_1 0x1A
-#define MIFARE_ULC_AUTH_2 0xAF
-
-#define ISO14443B_REQB 0x05
-#define ISO14443B_ATTRIB 0x1D
-#define ISO14443B_HALT 0x50
-
-//First byte is 26
-#define ISO15693_INVENTORY 0x01
-#define ISO15693_STAYQUIET 0x02
-//First byte is 02
-#define ISO15693_READBLOCK 0x20
-#define ISO15693_WRITEBLOCK 0x21
-#define ISO15693_LOCKBLOCK 0x22
-#define ISO15693_READ_MULTI_BLOCK 0x23
-#define ISO15693_SELECT 0x25
-#define ISO15693_RESET_TO_READY 0x26
-#define ISO15693_WRITE_AFI 0x27
-#define ISO15693_LOCK_AFI 0x28
-#define ISO15693_WRITE_DSFID 0x29
-#define ISO15693_LOCK_DSFID 0x2A
-#define ISO15693_GET_SYSTEM_INFO 0x2B
-#define ISO15693_READ_MULTI_SECSTATUS 0x2C
-
-
-
-
-void annotateIso14443a(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize)
-{
- switch(cmd[0])
- {
- case ISO14443_CMD_WUPA: snprintf(exp,size,"WUPA"); break;
- case ISO14443_CMD_ANTICOLL_OR_SELECT:{
- // 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
- // 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
- if(cmd[2] == 0x70)
- {
- snprintf(exp,size,"SELECT_UID"); break;
- }else
- {
- snprintf(exp,size,"ANTICOLL"); break;
+
+int applyIso14443a(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize) {
+ switch ( cmd[0] ){
+ case ISO14443A_CMD_WUPA: snprintf(exp,size,"WUPA"); break;
+ case ISO14443A_CMD_ANTICOLL_OR_SELECT:{
+ // 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
+ // 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
+ if(cmd[1] == 0x70)
+ snprintf(exp,size,"SELECT_UID");
+ else
+ snprintf(exp,size,"ANTICOLL");
+ break;
}
- }
- case ISO14443_CMD_ANTICOLL_OR_SELECT_2:{
- //95 20 = Anticollision of cascade level2
- //95 70 = Select of cascade level2
- if(cmd[2] == 0x70)
- {
- snprintf(exp,size,"SELECT_UID-2"); break;
- }else
- {
- snprintf(exp,size,"ANTICOLL-2"); break;
+ case ISO14443A_CMD_ANTICOLL_OR_SELECT_2:{
+ //95 20 = Anticollision of cascade level2
+ //95 70 = Select of cascade level2
+ if(cmd[2] == 0x70)
+ snprintf(exp,size,"SELECT_UID-2");
+ else
+ snprintf(exp,size,"ANTICOLL-2");
+ break;
+ }
+ case ISO14443A_CMD_REQA: snprintf(exp,size,"REQA"); break;
+ case ISO14443A_CMD_READBLOCK: snprintf(exp,size,"READBLOCK(%d)",cmd[1]); break;
+ case ISO14443A_CMD_WRITEBLOCK: snprintf(exp,size,"WRITEBLOCK(%d)",cmd[1]); break;
+ case ISO14443A_CMD_HALT: snprintf(exp,size,"HALT"); break;
+ case ISO14443A_CMD_RATS: snprintf(exp,size,"RATS"); break;
+ case MIFARE_CMD_INC: snprintf(exp,size,"INC(%d)",cmd[1]); break;
+ case MIFARE_CMD_DEC: snprintf(exp,size,"DEC(%d)",cmd[1]); break;
+ case MIFARE_CMD_RESTORE: snprintf(exp,size,"RESTORE(%d)",cmd[1]); break;
+ case MIFARE_CMD_TRANSFER: snprintf(exp,size,"TRANSFER(%d)",cmd[1]); break;
+ case MIFARE_AUTH_KEYA:{
+ if ( cmdsize > 3)
+ snprintf(exp,size,"AUTH-A(%d)",cmd[1]);
+ else
+ // case MIFARE_ULEV1_VERSION : both 0x60.
+ snprintf(exp,size,"EV1 VERSION");
+ break;
}
+ case MIFARE_AUTH_KEYB: snprintf(exp,size,"AUTH-B(%d)",cmd[1]); break;
+ case MIFARE_MAGICWUPC1: snprintf(exp,size,"MAGIC WUPC1"); break;
+ case MIFARE_MAGICWUPC2: snprintf(exp,size,"MAGIC WUPC2"); break;
+ case MIFARE_MAGICWIPEC: snprintf(exp,size,"MAGIC WIPEC"); break;
+ case MIFARE_ULC_AUTH_1 : snprintf(exp,size,"AUTH "); break;
+ case MIFARE_ULC_AUTH_2 : snprintf(exp,size,"AUTH_ANSW"); break;
+ case MIFARE_ULEV1_AUTH :
+ if ( cmdsize == 7 )
+ snprintf(exp,size,"PWD-AUTH KEY: 0x%02x%02x%02x%02x", cmd[1], cmd[2], cmd[3], cmd[4] );
+ else
+ snprintf(exp,size,"PWD-AUTH");
+ break;
+ case MIFARE_ULEV1_FASTREAD : {
+ if ( cmdsize >=3 && cmd[2] <= 0xE6)
+ snprintf(exp,size,"READ RANGE (%d-%d)",cmd[1],cmd[2]);
+ else
+ snprintf(exp,size,"?");
+ break;
+ }
+ case MIFARE_ULC_WRITE : {
+ if ( cmd[1] < 0x21 )
+ snprintf(exp,size,"WRITEBLOCK(%d)",cmd[1]);
+ else
+ snprintf(exp,size,"?");
+ break;
+ }
+ case MIFARE_ULEV1_READ_CNT :{
+ if ( cmd[1] < 5 )
+ snprintf(exp,size,"READ CNT(%d)",cmd[1]);
+ else
+ snprintf(exp,size,"?");
+ break;
+ }
+ case MIFARE_ULEV1_INCR_CNT : {
+ if ( cmd[1] < 5 )
+ snprintf(exp,size,"INCR(%d)",cmd[1]);
+ else
+ snprintf(exp,size,"?");
+ break;
+ }
+ case MIFARE_ULEV1_READSIG : snprintf(exp,size,"READ_SIG"); break;
+ case MIFARE_ULEV1_CHECKTEAR : snprintf(exp,size,"CHK_TEARING(%d)",cmd[1]); break;
+ case MIFARE_ULEV1_VCSL : snprintf(exp,size,"VCSL"); break;
+ default: return 0;
}
- case ISO14443_CMD_REQA: snprintf(exp,size,"REQA"); break;
- case ISO14443_CMD_READBLOCK: snprintf(exp,size,"READBLOCK(%d)",cmd[1]); break;
- case ISO14443_CMD_WRITEBLOCK: snprintf(exp,size,"WRITEBLOCK(%d)",cmd[1]); break;
- case ISO14443_CMD_HALT: snprintf(exp,size,"HALT"); break;
- case ISO14443_CMD_RATS: snprintf(exp,size,"RATS"); break;
- case MIFARE_CMD_INC: snprintf(exp,size,"INC(%d)",cmd[1]); break;
- case MIFARE_CMD_DEC: snprintf(exp,size,"DEC(%d)",cmd[1]); break;
- case MIFARE_CMD_RESTORE: snprintf(exp,size,"RESTORE(%d)",cmd[1]); break;
- case MIFARE_CMD_TRANSFER: snprintf(exp,size,"TRANSFER(%d)",cmd[1]); break;
- case MIFARE_AUTH_KEYA: snprintf(exp,size,"AUTH-A"); break;
- case MIFARE_AUTH_KEYB: snprintf(exp,size,"AUTH-B"); break;
- case MIFARE_MAGICMODE: snprintf(exp,size,"MAGIC"); break;
- default: snprintf(exp,size,"?"); break;
+ return 1;
+}
+
+void annotateIso14443a(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize) {
+ applyIso14443a(exp, size, cmd, cmdsize);
+}
+
+void annotateIclass(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize) {
+ switch (cmd[0]) {
+ case ICLASS_CMD_ACTALL: snprintf(exp,size,"ACTALL"); break;
+ case ICLASS_CMD_READ_OR_IDENTIFY:{
+ if(cmdsize > 1){
+ snprintf(exp,size,"READ(%d)",cmd[1]);
+ }else{
+ snprintf(exp,size,"IDENTIFY");
+ }
+ break;
+ }
+ case ICLASS_CMD_SELECT: snprintf(exp,size,"SELECT"); break;
+ case ICLASS_CMD_PAGESEL: snprintf(exp,size,"PAGESEL(%d)", cmd[1]); break;
+ case ICLASS_CMD_READCHECK_KC:snprintf(exp,size,"READCHECK[Kc](%d)", cmd[1]); break;
+ case ICLASS_CMD_READCHECK_KD:snprintf(exp,size,"READCHECK[Kd](%d)", cmd[1]); break;
+ case ICLASS_CMD_CHECK: snprintf(exp,size,"CHECK"); break;
+ case ICLASS_CMD_DETECT: snprintf(exp,size,"DETECT"); break;
+ case ICLASS_CMD_HALT: snprintf(exp,size,"HALT"); break;
+ case ICLASS_CMD_UPDATE: snprintf(exp,size,"UPDATE(%d)",cmd[1]); break;
+ case ICLASS_CMD_ACT: snprintf(exp,size,"ACT"); break;
+ case ICLASS_CMD_READ4: snprintf(exp,size,"READ4(%d)",cmd[1]); break;
+ default: snprintf(exp,size,"?"); break;
}
return;
}
-void annotateIclass(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize)
-{
- switch(cmd[0])
- {
- case ICLASS_CMD_ACTALL: snprintf(exp,size,"ACTALL"); break;
- case ICLASS_CMD_READ_OR_IDENTIFY:{
- if(cmdsize > 1){
- snprintf(exp,size,"READ(%d)",cmd[1]);
+void annotateIso15693(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize) {
+ if(cmd[0] == 0x26) {
+ switch(cmd[1]){
+ case ISO15693_INVENTORY :snprintf(exp, size, "INVENTORY");break;
+ case ISO15693_STAYQUIET :snprintf(exp, size, "STAY_QUIET");break;
+ default :snprintf(exp,size,"?"); break;
+ }
+ } else if(cmd[0] == 0x02) {
+ switch (cmd[1]) {
+ case ISO15693_READBLOCK :snprintf(exp, size, "READBLOCK");break;
+ case ISO15693_WRITEBLOCK :snprintf(exp, size, "WRITEBLOCK");break;
+ case ISO15693_LOCKBLOCK :snprintf(exp, size, "LOCKBLOCK");break;
+ case ISO15693_READ_MULTI_BLOCK :snprintf(exp, size, "READ_MULTI_BLOCK");break;
+ case ISO15693_SELECT :snprintf(exp, size, "SELECT");break;
+ case ISO15693_RESET_TO_READY :snprintf(exp, size, "RESET_TO_READY");break;
+ case ISO15693_WRITE_AFI :snprintf(exp, size, "WRITE_AFI");break;
+ case ISO15693_LOCK_AFI :snprintf(exp, size, "LOCK_AFI");break;
+ case ISO15693_WRITE_DSFID :snprintf(exp, size, "WRITE_DSFID");break;
+ case ISO15693_LOCK_DSFID :snprintf(exp, size, "LOCK_DSFID");break;
+ case ISO15693_GET_SYSTEM_INFO :snprintf(exp, size, "GET_SYSTEM_INFO");break;
+ case ISO15693_READ_MULTI_SECSTATUS :snprintf(exp, size, "READ_MULTI_SECSTATUS");break;
+ default: snprintf(exp,size,"?"); break;
+ }
+ }
+}
+
+void annotateTopaz(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize){
+ switch(cmd[0]) {
+ case TOPAZ_REQA :snprintf(exp, size, "REQA");break;
+ case TOPAZ_WUPA :snprintf(exp, size, "WUPA");break;
+ case TOPAZ_RID :snprintf(exp, size, "RID");break;
+ case TOPAZ_RALL :snprintf(exp, size, "RALL");break;
+ case TOPAZ_READ :snprintf(exp, size, "READ");break;
+ case TOPAZ_WRITE_E :snprintf(exp, size, "WRITE-E");break;
+ case TOPAZ_WRITE_NE :snprintf(exp, size, "WRITE-NE");break;
+ case TOPAZ_RSEG :snprintf(exp, size, "RSEG");break;
+ case TOPAZ_READ8 :snprintf(exp, size, "READ8");break;
+ case TOPAZ_WRITE_E8 :snprintf(exp, size, "WRITE-E8");break;
+ case TOPAZ_WRITE_NE8 :snprintf(exp, size, "WRITE-NE8");break;
+ default :snprintf(exp,size,"?"); break;
+ }
+}
+
+// iso 7816-3
+void annotateIso7816(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize){
+ // S-block
+ if ( (cmd[0] & 0xC0) && (cmdsize == 3) ) {
+ switch ( (cmd[0] & 0x3f) ) {
+ case 0x00 : snprintf(exp, size, "S-block RESYNCH req"); break;
+ case 0x20 : snprintf(exp, size, "S-block RESYNCH resp"); break;
+ case 0x01 : snprintf(exp, size, "S-block IFS req"); break;
+ case 0x21 : snprintf(exp, size, "S-block IFS resp"); break;
+ case 0x02 : snprintf(exp, size, "S-block ABORT req"); break;
+ case 0x22 : snprintf(exp, size, "S-block ABORT resp"); break;
+ case 0x03 : snprintf(exp, size, "S-block WTX reqt"); break;
+ case 0x23 : snprintf(exp, size, "S-block WTX resp"); break;
+ default : snprintf(exp, size, "S-block"); break;
+ }
+ }
+ // R-block (ack)
+ else if ( ((cmd[0] & 0xD0) == 0x80) && ( cmdsize > 2) ) {
+ if ( (cmd[0] & 0x10) == 0 )
+ snprintf(exp, size, "R-block ACK");
+ else
+ snprintf(exp, size, "R-block NACK");
+ }
+ // I-block
+ else {
+
+ int pos = (cmd[0] == 2 || cmd[0] == 3) ? 2 : 3;
+ switch ( cmd[pos] ){
+ case ISO7816_READ_BINARY :snprintf(exp, size, "READ BIN");break;
+ case ISO7816_WRITE_BINARY :snprintf(exp, size, "WRITE BIN");break;
+ case ISO7816_UPDATE_BINARY :snprintf(exp, size, "UPDATE BIN");break;
+ case ISO7816_ERASE_BINARY :snprintf(exp, size, "ERASE BIN");break;
+ case ISO7816_READ_RECORDS :snprintf(exp, size, "READ RECORDS");break;
+ case ISO7816_WRITE_RECORDS :snprintf(exp, size, "WRITE RECORDS");break;
+ case ISO7816_APPEND_RECORD :snprintf(exp, size, "APPEND RECORD");break;
+ case ISO7816_UPDATE_RECORD :snprintf(exp, size, "UPDATE RECORD");break;
+ case ISO7816_GET_DATA :snprintf(exp, size, "GET DATA");break;
+ case ISO7816_PUT_DATA :snprintf(exp, size, "PUT DATA");break;
+ case ISO7816_SELECT_FILE :snprintf(exp, size, "SELECT FILE");break;
+ case ISO7816_VERIFY :snprintf(exp, size, "VERIFY");break;
+ case ISO7816_INTERNAL_AUTHENTICATION :snprintf(exp, size, "INTERNAL AUTH");break;
+ case ISO7816_EXTERNAL_AUTHENTICATION :snprintf(exp, size, "EXTERNAL AUTH");break;
+ case ISO7816_GET_CHALLENGE :snprintf(exp, size, "GET CHALLENGE");break;
+ case ISO7816_MANAGE_CHANNEL :snprintf(exp, size, "MANAGE CHANNEL");break;
+ default :snprintf(exp,size,"?"); break;
+ }
+ }
+}
+
+// MIFARE DESFire
+void annotateMfDesfire(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize){
+
+ // it's basically a ISO14443a tag, so try annotation from there
+ if (!applyIso14443a(exp, size, cmd, cmdsize)){
+ //PrintAndLog("rest");
+ //PrintAndLog("(%d)",cmd[0]);
+ // S-block 11xxx010
+ if ( (cmd[0] & 0xC0) && (cmdsize == 3) ) {
+ switch ( (cmd[0] & 0x30) ) {
+ case 0x30 : snprintf(exp, size, "S-block DESELECT"); break;
+ case 0x00 : snprintf(exp, size, "S-block WTX"); break;
+ default : snprintf(exp, size, "S-block"); break;
+ }
+ }
+ // R-block (ack) 101xx01x
+ else if ( ((cmd[0] & 0xB0) == 0xA0) && ( cmdsize > 2) ) {
+ if ( (cmd[0] & 0x10) == 0 )
+ snprintf(exp, size, "R-block ACK(%d)", (cmd[0] & 0x01));
+ else
+ snprintf(exp, size, "R-block NACK(%d)", (cmd[0] & 0x01));
+ }
+ // I-block 000xCN1x
+ else if ( (cmd[0] & 0xC0) == 0x00){
+ // PCB [CID] [NAD] [INF] CRC CRC
+ int pos = 1;
+ if ( (cmd[0] & 0x08) == 0x08) // cid byte following
+ pos = pos + 1;
+ if ( (cmd[0] & 0x04) == 0x04) // nad byte following
+ pos = pos + 1;
+ //PrintAndLog("[%d]",pos);
+ switch ( cmd[pos] ){
+ case MFDES_CREATE_APPLICATION :snprintf(exp, size, "CREATE APPLICATION");break;
+ case MFDES_DELETE_APPLICATION :snprintf(exp, size, "DELETE APPLICATION");break;
+ case MFDES_GET_APPLICATION_IDS :snprintf(exp, size, "GET APPLICATION IDS");break;
+ case MFDES_SELECT_APPLICATION :snprintf(exp, size, "SELECT APPLICATION");break;
+ case MFDES_FORMAT_PICC :snprintf(exp, size, "FORMAT PICC");break;
+ case MFDES_GET_VERSION :snprintf(exp, size, "GET VERSION");break;
+ case MFDES_READ_DATA :snprintf(exp, size, "READ DATA");break;
+ case MFDES_WRITE_DATA :snprintf(exp, size, "WRITE DATA");break;
+ case MFDES_GET_VALUE :snprintf(exp, size, "GET VALUE");break;
+ case MFDES_CREDIT :snprintf(exp, size, "CREDIT");break;
+ case MFDES_DEBIT :snprintf(exp, size, "DEBIT");break;
+ case MFDES_LIMITED_CREDIT :snprintf(exp, size, "LIMITED CREDIT");break;
+ case MFDES_WRITE_RECORD :snprintf(exp, size, "WRITE RECORD");break;
+ case MFDES_READ_RECORDS :snprintf(exp, size, "READ RECORDS");break;
+ case MFDES_CLEAR_RECORD_FILE :snprintf(exp, size, "CLEAR RECORD FILE");break;
+ case MFDES_COMMIT_TRANSACTION :snprintf(exp, size, "COMMIT TRANSACTION");break;
+ case MFDES_ABORT_TRANSACTION :snprintf(exp, size, "ABORT TRANSACTION");break;
+ case MFDES_GET_FREE_MEMORY :snprintf(exp, size, "GET FREE MEMORY");break;
+ case MFDES_GET_FILE_IDS :snprintf(exp, size, "GET FILE IDS");break;
+ case MFDES_GET_ISOFILE_IDS :snprintf(exp, size, "GET ISOFILE IDS");break;
+ case MFDES_GET_FILE_SETTINGS :snprintf(exp, size, "GET FILE SETTINGS");break;
+ case MFDES_CHANGE_FILE_SETTINGS :snprintf(exp, size, "CHANGE FILE SETTINGS");break;
+ case MFDES_CREATE_STD_DATA_FILE :snprintf(exp, size, "CREATE STD DATA FILE");break;
+ case MFDES_CREATE_BACKUP_DATA_FILE :snprintf(exp, size, "CREATE BACKUP DATA FILE");break;
+ case MFDES_CREATE_VALUE_FILE :snprintf(exp, size, "CREATE VALUE FILE");break;
+ case MFDES_CREATE_LINEAR_RECORD_FILE :snprintf(exp, size, "CREATE LINEAR RECORD FILE");break;
+ case MFDES_CREATE_CYCLIC_RECORD_FILE :snprintf(exp, size, "CREATE CYCLIC RECORD FILE");break;
+ case MFDES_DELETE_FILE :snprintf(exp, size, "DELETE FILE");break;
+ case MFDES_AUTHENTICATE :snprintf(exp, size, "AUTH NATIVE (keyNo %d)", cmd[pos+1]);break; // AUTHENTICATE_NATIVE
+ case MFDES_AUTHENTICATE_ISO :snprintf(exp, size, "AUTH ISO (keyNo %d)", cmd[pos+1]);break; // AUTHENTICATE_STANDARD
+ case MFDES_AUTHENTICATE_AES :snprintf(exp, size, "AUTH AES (keyNo %d)", cmd[pos+1]);break;
+ case MFDES_CHANGE_KEY_SETTINGS :snprintf(exp, size, "CHANGE KEY SETTINGS");break;
+ case MFDES_GET_KEY_SETTINGS :snprintf(exp, size, "GET KEY SETTINGS");break;
+ case MFDES_CHANGE_KEY :snprintf(exp, size, "CHANGE KEY");break;
+ case MFDES_GET_KEY_VERSION :snprintf(exp, size, "GET KEY VERSION");break;
+ case MFDES_AUTHENTICATION_FRAME :snprintf(exp, size, "AUTH FRAME / NEXT FRAME");break;
+ default :break;
+ }
}else{
- snprintf(exp,size,"IDENTIFY");
+ // anything else
+ snprintf(exp,size,"?");
}
- break;
}
- case ICLASS_CMD_SELECT: snprintf(exp,size,"SELECT"); break;
- case ICLASS_CMD_PAGESEL: snprintf(exp,size,"PAGESEL"); break;
- case ICLASS_CMD_READCHECK: snprintf(exp,size,"READCHECK"); break;
- case ICLASS_CMD_CHECK: snprintf(exp,size,"CHECK"); break;
- case ICLASS_CMD_SOF: snprintf(exp,size,"SOF"); break;
- case ICLASS_CMD_HALT: snprintf(exp,size,"HALT"); break;
- default: snprintf(exp,size,"?"); break;
+}
+
+/**
+06 00 = INITIATE
+0E xx = SELECT ID (xx = Chip-ID)
+0B = Get UID
+08 yy = Read Block (yy = block number)
+09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
+0C = Reset to Inventory
+0F = Completion
+0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
+**/
+
+void annotateIso14443b(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize) {
+ switch(cmd[0]){
+ case ISO14443B_REQB : {
+
+ switch ( cmd[2] & 0x07 ) {
+ case 0: snprintf(exp, size,"1 slot ");break;
+ case 1: snprintf(exp, size,"2 slots ");break;
+ case 2: snprintf(exp, size,"4 slots ");break;
+ case 3: snprintf(exp, size,"8 slots ");break;
+ default: snprintf(exp, size,"16 slots ");break;
+ }
+ if ( (cmd[2] & 0x8) )
+ snprintf(exp, size,"WUPB");
+ else
+ snprintf(exp, size,"REQB");
+ break;
+ }
+ case ISO14443B_ATTRIB : snprintf(exp,size,"ATTRIB");break;
+ case ISO14443B_HALT : snprintf(exp,size,"HALT");break;
+ case ISO14443B_INITIATE : snprintf(exp,size,"INITIATE");break;
+ case ISO14443B_SELECT : snprintf(exp,size,"SELECT(%d)",cmd[1]);break;
+ case ISO14443B_GET_UID : snprintf(exp,size,"GET UID");break;
+ case ISO14443B_READ_BLK : snprintf(exp,size,"READ_BLK(%d)", cmd[1]);break;
+ case ISO14443B_WRITE_BLK : snprintf(exp,size,"WRITE_BLK(%d)",cmd[1]);break;
+ case ISO14443B_RESET : snprintf(exp,size,"RESET");break;
+ case ISO14443B_COMPLETION : snprintf(exp,size,"COMPLETION");break;
+ case ISO14443B_AUTHENTICATE : snprintf(exp,size,"AUTHENTICATE");break;
+ case ISO14443B_PING : snprintf(exp,size,"PING");break;
+ case ISO14443B_PONG : snprintf(exp,size,"PONG");break;
+ default : snprintf(exp,size ,"?");break;
}
- return;
}
-void annotateIso15693(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize)
+// LEGIC
+// 1 = read
+// 0 = write
+// Quite simpel tag
+void annotateLegic(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize){
+ uint8_t bitsend = cmd[0];
+ uint8_t cmdBit = (cmd[1] & 1);
+ switch (bitsend){
+ case 7:
+ snprintf(exp, size, "IV 0x%02X", cmd[1]);
+ break;
+ case 6: {
+ switch ( cmd[1] ) {
+ case LEGIC_MIM_22: snprintf(exp, size, "MIM22"); break;
+ case LEGIC_MIM_256: snprintf(exp, size, "MIM256"); break;
+ case LEGIC_MIM_1024: snprintf(exp, size, "MIM1024"); break;
+ case LEGIC_ACK_22: snprintf(exp, size, "ACK 22"); break;
+ case LEGIC_ACK_256: snprintf(exp, size, "ACK 256/1024"); break;
+ }
+ break;
+ }
+ case 9:
+ case 11: {
+
+ uint16_t address = (cmd[2] << 7) | cmd[1] >> 1;
+
+ if (cmdBit == LEGIC_READ)
+ snprintf(exp, size, "READ Byte(%d)", address);
+
+ if (cmdBit == LEGIC_WRITE )
+ snprintf(exp, size, "WRITE Byte(%d)", address);
+ break;
+ }
+ case 21: {
+ if (cmdBit == LEGIC_WRITE ) {
+ uint16_t address = ((cmd[2] << 7) | cmd[1] >> 1) & 0xFF;
+ uint8_t val = (cmd[3] & 1 ) << 7 | cmd[2] >> 1;
+ snprintf(exp, size, "WRITE Byte(%d) %02X", address, val);
+ }
+ break;
+ }
+ case 23: {
+ if (cmdBit == LEGIC_WRITE ) {
+ uint16_t address = ((cmd[2] << 7) | cmd[1] >> 1) & 0x3FF;
+ uint8_t val = (cmd[3] & 0x7 ) << 5 | cmd[2] >> 3;
+ snprintf(exp, size, "WRITE Byte(%d) %02X", address, val);
+ }
+ break;
+ }
+ case 12:
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief iso14443A_CRC_check Checks CRC in command or response
+ * @param isResponse
+ * @param data
+ * @param len
+ * @return 0 : CRC-command, CRC not ok
+ * 1 : CRC-command, CRC ok
+ * 2 : Not crc-command
+ */
+
+uint8_t iso14443A_CRC_check(bool isResponse, uint8_t* data, uint8_t len)
{
+ uint8_t b1,b2;
- if(cmd[0] == 0x26)
- {
- switch(cmd[1]){
- case ISO15693_INVENTORY :snprintf(exp, size, "INVENTORY");break;
- case ISO15693_STAYQUIET :snprintf(exp, size, "STAY_QUIET");break;
- default: snprintf(exp,size,"?"); break;
+ if(len <= 2) return 2;
- }
- }else if(cmd[0] == 0x02)
+ if(isResponse & (len < 6)) return 2;
+
+ ComputeCrc14443(CRC_14443_A, data, len-2, &b1, &b2);
+ if (b1 != data[len-2] || b2 != data[len-1]) {
+ return 0;
+ } else {
+ return 1;
+ }
+}
+
+
+/**
+ * @brief iso14443B_CRC_check Checks CRC in command or response
+ * @param isResponse
+ * @param data
+ * @param len
+ * @return 0 : CRC-command, CRC not ok
+ * 1 : CRC-command, CRC ok
+ * 2 : Not crc-command
+ */
+
+uint8_t iso14443B_CRC_check(bool isResponse, uint8_t* data, uint8_t len)
+{
+ uint8_t b1,b2;
+
+ if(len <= 2) return 2;
+
+ ComputeCrc14443(CRC_14443_B, data, len-2, &b1, &b2);
+ if(b1 != data[len-2] || b2 != data[len-1]) {
+ return 0;
+ }
+ return 1;
+}
+
+/**
+ * @brief iclass_CRC_Ok Checks CRC in command or response
+ * @param isResponse
+ * @param data
+ * @param len
+ * @return 0 : CRC-command, CRC not ok
+ * 1 : CRC-command, CRC ok
+ * 2 : Not crc-command
+ */
+uint8_t iclass_CRC_check(bool isResponse, uint8_t* data, uint8_t len)
+{
+ if(len < 4) return 2;//CRC commands (and responses) are all at least 4 bytes
+
+ uint8_t b1, b2;
+
+ if(!isResponse)//Commands to tag
{
- switch(cmd[1])
+ /**
+ These commands should have CRC. Total length leftmost
+ 4 READ
+ 4 READ4
+ 12 UPDATE - unsecured, ends with CRC16
+ 14 UPDATE - secured, ends with signature instead
+ 4 PAGESEL
+ **/
+ if(len == 4 || len == 12)//Covers three of them
{
- case ISO15693_READBLOCK :snprintf(exp, size, "READBLOCK");break;
- case ISO15693_WRITEBLOCK :snprintf(exp, size, "WRITEBLOCK");break;
- case ISO15693_LOCKBLOCK :snprintf(exp, size, "LOCKBLOCK");break;
- case ISO15693_READ_MULTI_BLOCK :snprintf(exp, size, "READ_MULTI_BLOCK");break;
- case ISO15693_SELECT :snprintf(exp, size, "SELECT");break;
- case ISO15693_RESET_TO_READY :snprintf(exp, size, "RESET_TO_READY");break;
- case ISO15693_WRITE_AFI :snprintf(exp, size, "WRITE_AFI");break;
- case ISO15693_LOCK_AFI :snprintf(exp, size, "LOCK_AFI");break;
- case ISO15693_WRITE_DSFID :snprintf(exp, size, "WRITE_DSFID");break;
- case ISO15693_LOCK_DSFID :snprintf(exp, size, "LOCK_DSFID");break;
- case ISO15693_GET_SYSTEM_INFO :snprintf(exp, size, "GET_SYSTEM_INFO");break;
- case ISO15693_READ_MULTI_SECSTATUS :snprintf(exp, size, "READ_MULTI_SECSTATUS");break;
- default: snprintf(exp,size,"?"); break;
+ //Don't include the command byte
+ ComputeCrc14443(CRC_ICLASS, (data+1), len-3, &b1, &b2);
+ return b1 == data[len -2] && b2 == data[len-1];
}
+ return 2;
+ }else{
+ /**
+ These tag responses should have CRC. Total length leftmost
+
+ 10 READ data[8] crc[2]
+ 34 READ4 data[32]crc[2]
+ 10 UPDATE data[8] crc[2]
+ 10 SELECT csn[8] crc[2]
+ 10 IDENTIFY asnb[8] crc[2]
+ 10 PAGESEL block1[8] crc[2]
+ 10 DETECT csn[8] crc[2]
+
+ These should not
+
+ 4 CHECK chip_response[4]
+ 8 READCHECK data[8]
+ 1 ACTALL sof[1]
+ 1 ACT sof[1]
+
+ In conclusion, without looking at the command; any response
+ of length 10 or 34 should have CRC
+ **/
+ if(len != 10 && len != 34) return true;
+
+ ComputeCrc14443(CRC_ICLASS, data, len-2, &b1, &b2);
+ return b1 == data[len -2] && b2 == data[len-1];
}
}
-uint16_t printTraceLine(uint16_t tracepos, uint8_t* trace, bool iclass, bool showWaitCycles)
+bool is_last_record(uint16_t tracepos, uint8_t *trace, uint16_t traceLen)
{
- bool isResponse;
- uint16_t duration, data_len,parity_len;
+ return(tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) >= traceLen);
+}
+
+bool next_record_is_response(uint16_t tracepos, uint8_t *trace)
+{
+ uint16_t next_records_datalen = *((uint16_t *)(trace + tracepos + sizeof(uint32_t) + sizeof(uint16_t)));
+
+ return(next_records_datalen & 0x8000);
+}
+
+
+bool merge_topaz_reader_frames(uint32_t timestamp, uint32_t *duration, uint16_t *tracepos, uint16_t traceLen, uint8_t *trace, uint8_t *frame, uint8_t *topaz_reader_command, uint16_t *data_len)
+{
+
+#define MAX_TOPAZ_READER_CMD_LEN 16
+
+ uint32_t last_timestamp = timestamp + *duration;
+
+ if ((*data_len != 1) || (frame[0] == TOPAZ_WUPA) || (frame[0] == TOPAZ_REQA)) return false;
+
+ memcpy(topaz_reader_command, frame, *data_len);
+
+ while (!is_last_record(*tracepos, trace, traceLen) && !next_record_is_response(*tracepos, trace)) {
+ uint32_t next_timestamp = *((uint32_t *)(trace + *tracepos));
+ *tracepos += sizeof(uint32_t);
+ uint16_t next_duration = *((uint16_t *)(trace + *tracepos));
+ *tracepos += sizeof(uint16_t);
+ uint16_t next_data_len = *((uint16_t *)(trace + *tracepos)) & 0x7FFF;
+ *tracepos += sizeof(uint16_t);
+ uint8_t *next_frame = (trace + *tracepos);
+ *tracepos += next_data_len;
+ if ((next_data_len == 1) && (*data_len + next_data_len <= MAX_TOPAZ_READER_CMD_LEN)) {
+ memcpy(topaz_reader_command + *data_len, next_frame, next_data_len);
+ *data_len += next_data_len;
+ last_timestamp = next_timestamp + next_duration;
+ } else {
+ // rewind and exit
+ *tracepos = *tracepos - next_data_len - sizeof(uint16_t) - sizeof(uint16_t) - sizeof(uint32_t);
+ break;
+ }
+ uint16_t next_parity_len = (next_data_len-1)/8 + 1;
+ *tracepos += next_parity_len;
+ }
+
+ *duration = last_timestamp - timestamp;
+
+ return true;
+}
+
+
+uint16_t printTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace, uint8_t protocol, bool showWaitCycles, bool markCRCBytes)
+{
+ bool isResponse;
+ uint16_t data_len, parity_len;
+ uint32_t duration;
+ uint8_t topaz_reader_command[9];
uint32_t timestamp, first_timestamp, EndOfTransmissionTimestamp;
char explanation[30] = {0};
+ if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) > traceLen) return traceLen;
+
first_timestamp = *((uint32_t *)(trace));
timestamp = *((uint32_t *)(trace + tracepos));
- // Break and stick with current result if buffer was not completely full
- if (timestamp == 0x44444444) return TRACE_SIZE;
tracepos += 4;
duration = *((uint16_t *)(trace + tracepos));
}
parity_len = (data_len-1)/8 + 1;
- if (tracepos + data_len + parity_len >= TRACE_SIZE) {
- return TRACE_SIZE;
+ if (tracepos + data_len + parity_len > traceLen) {
+ return traceLen;
}
-
uint8_t *frame = trace + tracepos;
tracepos += data_len;
uint8_t *parityBytes = trace + tracepos;
tracepos += parity_len;
+ if (protocol == TOPAZ && !isResponse) {
+ // topaz reader commands come in 1 or 9 separate frames with 7 or 8 Bits each.
+ // merge them:
+ if (merge_topaz_reader_frames(timestamp, &duration, &tracepos, traceLen, trace, frame, topaz_reader_command, &data_len)) {
+ frame = topaz_reader_command;
+ }
+ }
+
+ //Check the CRC status
+ uint8_t crcStatus = 2;
+
+ if (data_len > 2) {
+ switch (protocol) {
+ case ICLASS:
+ crcStatus = iclass_CRC_check(isResponse, frame, data_len);
+ break;
+ case ISO_14443B:
+ case TOPAZ:
+ crcStatus = iso14443B_CRC_check(isResponse, frame, data_len);
+ break;
+ case ISO_14443A:
+ case MFDES:
+ crcStatus = iso14443A_CRC_check(isResponse, frame, data_len);
+ break;
+ default:
+ break;
+ }
+ }
+ //0 CRC-command, CRC not ok
+ //1 CRC-command, CRC ok
+ //2 Not crc-command
+
//--- Draw the data column
char line[16][110];
- for (int j = 0; j < data_len; j++) {
+
+ for (int j = 0; j < data_len && j/16 < 16; j++) {
+
int oddparity = 0x01;
int k;
for (k=0 ; k<8 ; k++) {
oddparity ^= (((frame[j] & 0xFF) >> k) & 0x01);
}
-
uint8_t parityBits = parityBytes[j>>3];
-
- if (isResponse && (oddparity != ((parityBits >> (7-(j&0x0007))) & 0x01))) {
- sprintf(line[j/16]+((j%16)*4), "%02x! ", frame[j]);
+ if (protocol != LEGIC && protocol != ISO_14443B && protocol != ISO_7816_4 && (isResponse || protocol == ISO_14443A) && (oddparity != ((parityBits >> (7-(j&0x0007))) & 0x01))) {
+ snprintf(line[j/16]+(( j % 16) * 4),110, "%02x! ", frame[j]);
} else {
- sprintf(line[j/16]+((j%16)*4), "%02x ", frame[j]);
+ snprintf(line[j/16]+(( j % 16) * 4),110, "%02x ", frame[j]);
}
- }
- //--- Draw the CRC column
- bool crcError = false;
- if (data_len > 2) {
- uint8_t b1, b2;
- if(iclass)
- {
- if(!isResponse && data_len == 4 ) {
- // Rough guess that this is a command from the reader
- // For iClass the command byte is not part of the CRC
- ComputeCrc14443(CRC_ICLASS, &frame[1], data_len-3, &b1, &b2);
- } else {
- // For other data.. CRC might not be applicable (UPDATE commands etc.)
- ComputeCrc14443(CRC_ICLASS, frame, data_len-2, &b1, &b2);
- }
-
- if (b1 != frame[data_len-2] || b2 != frame[data_len-1]) {
- crcError = true;
- }
-
- }else{//Iso 14443a
-
- ComputeCrc14443(CRC_14443_A, frame, data_len-2, &b1, &b2);
+ }
- if (b1 != frame[data_len-2] || b2 != frame[data_len-1]) {
- if(!(isResponse & (data_len < 6)))
- {
- crcError = true;
- }
- }
+ if (markCRCBytes) {
+ //CRC-command
+ if(crcStatus == 0 || crcStatus == 1) {
+ char *pos1 = line[(data_len-2)/16]+(((data_len-2) % 16) * 4);
+ (*pos1) = '[';
+ char *pos2 = line[(data_len)/16]+(((data_len) % 16) * 4);
+ sprintf(pos2, "%c", ']');
}
}
- char *crc = crcError ? "!crc" :" ";
+
+ if (data_len == 0 ) {
+ sprintf(line[0],"<empty trace - possible error>");
+ return tracepos;
+ }
+
+ // Draw the CRC column
+ char *crc = (crcStatus == 0 ? "!crc" : (crcStatus == 1 ? " ok " : " "));
EndOfTransmissionTimestamp = timestamp + duration;
- if(!isResponse)
- {
- if(iclass)
- annotateIclass(explanation,sizeof(explanation),frame,data_len);
- else
- annotateIso14443a(explanation,sizeof(explanation),frame,data_len);
+ // Always annotate LEGIC read/tag
+ if ( protocol == LEGIC )
+ annotateLegic(explanation,sizeof(explanation),frame,data_len);
+
+ if (!isResponse) {
+ switch(protocol) {
+ case ICLASS: annotateIclass(explanation,sizeof(explanation),frame,data_len); break;
+ case ISO_14443A: annotateIso14443a(explanation,sizeof(explanation),frame,data_len); break;
+ case MFDES: annotateMfDesfire(explanation,sizeof(explanation),frame,data_len); break;
+ case ISO_14443B: annotateIso14443b(explanation,sizeof(explanation),frame,data_len); break;
+ case TOPAZ: annotateTopaz(explanation,sizeof(explanation),frame,data_len); break;
+ case ISO_7816_4: annotateIso7816(explanation,sizeof(explanation),frame,data_len); break;
+
+ default: break;
+ }
}
- int num_lines = (data_len - 1)/16 + 1;
- for (int j = 0; j < num_lines; j++) {
+ int num_lines = MIN((data_len - 1)/16 + 1, 16);
+ for (int j = 0; j < num_lines ; j++) {
if (j == 0) {
- PrintAndLog(" %9d | %9d | %s | %-64s| %s| %s",
+ PrintAndLog(" %10u | %10u | %s |%-64s | %s| %s",
(timestamp - first_timestamp),
(EndOfTransmissionTimestamp - first_timestamp),
(isResponse ? "Tag" : "Rdr"),
(j == num_lines-1) ? crc : " ",
(j == num_lines-1) ? explanation : "");
} else {
- PrintAndLog(" | | | %-64s| %s| %s",
+ PrintAndLog(" | | |%-64s | %s| %s",
line[j],
- (j == num_lines-1)?crc:" ",
+ (j == num_lines-1) ? crc : " ",
(j == num_lines-1) ? explanation : "");
}
}
- bool next_isResponse = *((uint16_t *)(trace + tracepos + 6)) & 0x8000;
-
- if (showWaitCycles && !isResponse && next_isResponse) {
+ if (is_last_record(tracepos, trace, traceLen)) return traceLen;
+
+ if (showWaitCycles && !isResponse && next_record_is_response(tracepos, trace)) {
uint32_t next_timestamp = *((uint32_t *)(trace + tracepos));
- if (next_timestamp != 0x44444444) {
- PrintAndLog(" %9d | %9d | %s | fdt (Frame Delay Time): %d",
+ PrintAndLog(" %10u | %10u | %s |fdt (Frame Delay Time): %d",
(EndOfTransmissionTimestamp - first_timestamp),
(next_timestamp - first_timestamp),
" ",
(next_timestamp - EndOfTransmissionTimestamp));
}
- }
+
return tracepos;
}
-int CmdHFList(const char *Cmd)
-{
+int usage_hf_list(){
+ PrintAndLog("List protocol data in trace buffer.");
+ PrintAndLog("Usage: hf list <protocol> [f][c]");
+ PrintAndLog(" f - show frame delay times as well");
+ PrintAndLog(" c - mark CRC bytes");
+ PrintAndLog("Supported <protocol> values:");
+ PrintAndLog(" raw - just show raw data without annotations");
+ PrintAndLog(" 14a - interpret data as iso14443a communications");
+ PrintAndLog(" 14b - interpret data as iso14443b communications");
+ PrintAndLog(" des - interpret data as DESFire communications");
+ PrintAndLog(" iclass - interpret data as iclass communications");
+ PrintAndLog(" topaz - interpret data as topaz communications");
+ PrintAndLog(" 7816 - interpret data as iso7816-4 communications");
+ PrintAndLog(" legic - interpret data as LEGIC communications");
+ PrintAndLog("");
+ PrintAndLog("example: hf list 14a f");
+ PrintAndLog(" hf list iclass");
+ return 0;
+}
+int usage_hf_search(){
+ PrintAndLog("Usage: hf search");
+ PrintAndLog("Will try to find a HF read out of the unknown tag. Stops when found.");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - This help");
+ PrintAndLog("");
+ return 0;
+}
+int usage_hf_snoop(){
+ PrintAndLog("Usage: hf snoop <skip pairs> <skip triggers>");
+ PrintAndLog("The high frequence snoop will assign all available memory on device for snooped data");
+ PrintAndLog("User the 'data samples' command to download from device, and 'data plot' to look at it");
+ PrintAndLog("Press button to quit the snooping.");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - This help");
+ PrintAndLog(" <skip pairs> - skip sample pairs");
+ PrintAndLog(" <skip triggers> - skip number of triggers");
+ PrintAndLog("");
+ PrintAndLog("example: hf snoop");
+ PrintAndLog(" hf snoop 1000 0");
+ return 0;
+}
+
+int CmdHFList(const char *Cmd) {
+ clearCommandBuffer();
+
bool showWaitCycles = false;
- char type[40] = {0};
- int tlen = param_getstr(Cmd,0,type);
- char param = param_getchar(Cmd, 1);
+ bool markCRCBytes = false;
+ char type[10] = {0};
+ //int tlen = param_getstr(Cmd,0,type);
+ char param1 = param_getchar(Cmd, 1);
+ char param2 = param_getchar(Cmd, 2);
bool errors = false;
- bool iclass = false;
- //Validate params
- if(tlen == 0 || (strcmp(type, "iclass") != 0 && strcmp(type,"14a") != 0))
- {
- errors = true;
- }
- if(param == 'h' || (param !=0 && param != 'f'))
- {
- errors = true;
+ uint8_t protocol = 0;
+
+ //Validate params H or empty
+ if (strlen(Cmd) < 1 || param1 == 'h' || param1 == 'H') return usage_hf_list();
+
+ //Validate params F,C
+ if(
+ (param1 != 0 && param1 != 'f' && param1 != 'c') ||
+ (param2 != 0 && param2 != 'f' && param2 != 'c')
+ ) {
+ return usage_hf_list();
}
- if (errors) {
- PrintAndLog("List protocol data in trace buffer.");
- PrintAndLog("Usage: hf list [14a|iclass] [f]");
- PrintAndLog(" 14a - interpret data as iso14443a communications");
- PrintAndLog(" iclass - interpret data as iclass communications");
- PrintAndLog(" f - show frame delay times as well");
- PrintAndLog("");
- PrintAndLog("example: hf list 14a f");
- PrintAndLog("example: hf list iclass");
- return 0;
- }
- if(strcmp(type, "iclass") == 0)
- {
- iclass = true;
+ param_getstr(Cmd,0,type);
+
+ // validate type of output
+ if(strcmp(type, "iclass") == 0) protocol = ICLASS;
+ else if(strcmp(type, "14a") == 0) protocol = ISO_14443A;
+ else if(strcmp(type, "14b") == 0) protocol = ISO_14443B;
+ else if(strcmp(type, "topaz")== 0) protocol = TOPAZ;
+ else if(strcmp(type, "7816")== 0) protocol = ISO_7816_4;
+ else if(strcmp(type,"des")== 0) protocol = MFDES;
+ else if(strcmp(type,"legic")==0) protocol = LEGIC;
+ else if(strcmp(type, "raw")== 0) protocol = -1;//No crc, no annotations
+ else errors = true;
+
+ if (errors) return usage_hf_list();
+
+ if (param1 == 'f' || param2 == 'f') showWaitCycles = true;
+ if (param1 == 'c' || param2 == 'c') markCRCBytes = true;
+
+ uint8_t *trace;
+ uint16_t tracepos = 0;
+ trace = malloc(USB_CMD_DATA_SIZE);
+
+ // Query for the size of the trace
+ UsbCommand response;
+ GetFromBigBuf(trace, USB_CMD_DATA_SIZE, 0);
+ WaitForResponse(CMD_ACK, &response);
+ uint16_t traceLen = response.arg[2];
+ if (traceLen > USB_CMD_DATA_SIZE) {
+ uint8_t *p = realloc(trace, traceLen);
+ if (p == NULL) {
+ PrintAndLog("Cannot allocate memory for trace");
+ free(trace);
+ return 2;
+ }
+ trace = p;
+ GetFromBigBuf(trace, traceLen, 0);
+ WaitForResponse(CMD_ACK, NULL);
}
+
+ PrintAndLog("Recorded Activity (TraceLen = %d bytes)", traceLen);
+ PrintAndLog("");
+ PrintAndLog("Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer");
+ if ( protocol == ISO_14443A )
+ PrintAndLog("iso14443a - All times are in carrier periods (1/13.56Mhz)");
+ if ( protocol == ICLASS )
+ PrintAndLog("iClass - Timings are not as accurate");
+ if ( protocol == LEGIC )
+ PrintAndLog("LEGIC - Timings are in ticks (1us == 1.5ticks)");
+ PrintAndLog("");
+ PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC | Annotation |");
+ PrintAndLog("------------|------------|-----|-----------------------------------------------------------------|-----|--------------------|");
- if (param == 'f') {
- showWaitCycles = true;
+ while(tracepos < traceLen) {
+ tracepos = printTraceLine(tracepos, traceLen, trace, protocol, showWaitCycles, markCRCBytes);
}
+ free(trace);
+ return 0;
+}
- uint8_t trace[TRACE_SIZE];
- uint16_t tracepos = 0;
- GetFromBigBuf(trace, TRACE_SIZE, 0);
- WaitForResponse(CMD_ACK, NULL);
+int CmdHFSearch(const char *Cmd){
- PrintAndLog("Recorded Activity");
- PrintAndLog("");
- PrintAndLog("Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer");
- PrintAndLog("iso14443a - All times are in carrier periods (1/13.56Mhz)");
- PrintAndLog("iClass - Timings are not as accurate");
+ char cmdp = param_getchar(Cmd, 0);
+ if (cmdp == 'h' || cmdp == 'H') return usage_hf_search();
+
PrintAndLog("");
- PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC | Annotation |");
- PrintAndLog("-----------|-----------|-----|-----------------------------------------------------------------|-----|--------------------|");
-
- while(tracepos < TRACE_SIZE)
- {
- tracepos = printTraceLine(tracepos, trace, iclass, showWaitCycles);
+ int ans = CmdHF14AReader("s");
+ if (ans > 0) {
+ PrintAndLog("\nValid ISO14443-A Tag Found - Quiting Search\n");
+ return ans;
+ }
+ ans = HF14BReader(false); //CmdHF14BReader("s");
+ if (ans) {
+ PrintAndLog("\nValid ISO14443-B Tag Found - Quiting Search\n");
+ return ans;
}
+ ans = HF15Reader("", false);
+ if (ans) {
+ PrintAndLog("\nValid ISO15693 Tag Found - Quiting Search\n");
+ return ans;
+ }
+ ans = HFLegicReader("", false);
+ if ( ans == 0) {
+ PrintAndLog("\nValid LEGIC Tag Found - Quiting Search\n");
+ return 1;
+ }
+ ans = CmdHFTopazReader("s");
+ if (ans == 0) {
+ PrintAndLog("\nValid Topaz Tag Found - Quiting Search\n");
+ return 1;
+ }
+ ans = HFiClassReader("", false, false);
+ if (ans) {
+ PrintAndLog("\nValid iClass Tag (or PicoPass Tag) Found - Quiting Search\n");
+ return ans;
+ }
+
+ PrintAndLog("\nno known/supported 13.56 MHz tags found\n");
return 0;
}
+int CmdHFSnoop(const char *Cmd) {
+ char cmdp = param_getchar(Cmd, 0);
+ if (cmdp == 'h' || cmdp == 'H') return usage_hf_snoop();
+
+ int skippairs = param_get32ex(Cmd, 0, 0, 10);
+ int skiptriggers = param_get32ex(Cmd, 1, 0, 10);
+
+ UsbCommand c = {CMD_HF_SNIFFER, {skippairs, skiptriggers, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ return 0;
+}
-static command_t CommandTable[] =
-{
- {"help", CmdHelp, 1, "This help"},
- {"14a", CmdHF14A, 1, "{ ISO14443A RFIDs... }"},
- {"14b", CmdHF14B, 1, "{ ISO14443B RFIDs... }"},
- {"15", CmdHF15, 1, "{ ISO15693 RFIDs... }"},
- {"epa", CmdHFEPA, 1, "{ German Identification Card... }"},
- {"legic", CmdHFLegic, 0, "{ LEGIC RFIDs... }"},
- {"iclass", CmdHFiClass, 1, "{ ICLASS RFIDs... }"},
- {"mf", CmdHFMF, 1, "{ MIFARE RFIDs... }"},
- {"tune", CmdHFTune, 0, "Continuously measure HF antenna tuning"},
- {"list", CmdHFList, 1, "List protocol data in trace buffer"},
+static command_t CommandTable[] = {
+ {"help", CmdHelp, 1, "This help"},
+ {"14a", CmdHF14A, 1, "{ ISO14443A RFIDs... }"},
+ {"14b", CmdHF14B, 1, "{ ISO14443B RFIDs... }"},
+ {"15", CmdHF15, 1, "{ ISO15693 RFIDs... }"},
+ {"epa", CmdHFEPA, 1, "{ German Identification Card... }"},
+ {"legic", CmdHFLegic, 1, "{ LEGIC RFIDs... }"},
+ {"iclass", CmdHFiClass, 1, "{ ICLASS RFIDs... }"},
+ {"mf", CmdHFMF, 1, "{ MIFARE RFIDs... }"},
+ {"mfu", CmdHFMFUltra, 1, "{ MIFARE Ultralight RFIDs... }"},
+ {"mfdes", CmdHFMFDes, 1, "{ MIFARE Desfire RFIDs... }"},
+ {"topaz", CmdHFTopaz, 1, "{ TOPAZ (NFC Type 1) RFIDs... }"},
+ {"tune", CmdHFTune, 0, "Continuously measure HF antenna tuning"},
+ {"list", CmdHFList, 1, "List protocol data in trace buffer"},
+ {"search", CmdHFSearch, 1, "Search for known HF tags [preliminary]"},
+ {"snoop", CmdHFSnoop, 0, "<samples to skip (10000)> <triggers to skip (1)> Generic LF/HF Snoop in Testing stage"},
{NULL, NULL, 0, NULL}
};
-int CmdHF(const char *Cmd)
-{
- CmdsParse(CommandTable, Cmd);
- return 0;
+int CmdHF(const char *Cmd) {
+ clearCommandBuffer();
+ CmdsParse(CommandTable, Cmd);
+ return 0;
}
-int CmdHelp(const char *Cmd)
-{
- CmdsHelp(CommandTable);
- return 0;
+int CmdHelp(const char *Cmd) {
+ CmdsHelp(CommandTable);
+ return 0;
}
projects / proxmark3-svn / blobdiff