CHG: added some documentation about what arguments does.
CHG: 'data tune' - added flush after printf.
size_t len = 0;
size_t startidx = c->arg[0];
uint8_t isok = FALSE;
+ // arg0 = startindex
+ // arg1 = length bytes to transfer
+ // arg2 = RFU
+ //Dbprintf("transfer to client parameters: %llu | %llu | %llu", c->arg[0], c->arg[1], c->arg[2]);
+
for(size_t i = 0; i < c->arg[1]; i += USB_CMD_DATA_SIZE) {
- len = MIN((c->arg[1] - i),USB_CMD_DATA_SIZE);
+ len = MIN( (c->arg[1] - i), USB_CMD_DATA_SIZE);
isok = cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, i, len, BigBuf_get_traceLen(), BigBuf + startidx + i, len);
if (!isok)
Dbprintf("transfer to client failed :: | bytes %d", len);
}
case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
// iceman; since changing fpga_bitstreams clears bigbuff, Its better to call it before.
- // to be able to use this one for uploading data to device not only for LF, I use c->arg[1]
+ // to be able to use this one for uploading data to device
+ // arg1 = 0 upload for LF usage
+ // 1 upload for HF usage
if ( c->arg[1] == 0 )
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
else
TurnReadLFOn(READ_GAP);
// Acquisition
- doT55x7Acquisition(12000);
+ doT55x7Acquisition(7679);
// Turn the field off
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
while(!WaitForResponseTimeout(CMD_MEASURED_ANTENNA_TUNING, &resp, 2000)) {
timeout++;
printf(".");
+ fflush(stdout);
if (timeout > 7) {
PrintAndLog("\nNo response from Proxmark. Aborting...");
return 1;
return 0;\r
}\r
\r
- uint8_t got[12288];\r
+ //uint8_t got[12288];\r
+ uint8_t got[7679];\r
GetFromBigBuf(got, sizeof(got), 0);\r
if ( !WaitForResponseTimeout(CMD_ACK, NULL, 8000) ) {\r
PrintAndLog("command execution time out");\r
printf("\r#db# %s", s);
fflush(stdout);
}
- else
+ else {
PrintAndLog("#db# %s", s);
-
+ }
return;
} break;
}
case CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K:
case CMD_DOWNLOADED_EML_BIGBUF: {
+ // sample_buf is a array pointer, located in data.c
+ // arg0 = offset in transfer. Startindex of this chunk
+ // arg1 = length bytes to transfer
+ // arg2 = bigbuff tracelength (?)
memcpy( sample_buf + (UC->arg[0]), UC->d.asBytes, UC->arg[1]);
+ //printf("DBG:: Download from device. chunk %llu | size %llu | tracelen:%llu \n", UC->arg[0], UC->arg[1], UC->arg[2]);
break;
}
default: {
*hi2 = (*hi2<<1)|(*hi>>31);
*hi = (*hi<<1)|(*lo>>31);
//Then, shift in a 0 or one into low
+ *lo <<= 1;
if (dest[idx] && !dest[idx+1]) // 1 0
- *lo=(*lo<<1)|1;
+ *lo |= 1;
else // 0 1
- *lo=(*lo<<1)|0;
+ *lo |= 0;
}
return (int)startIdx;
}