-The iceman fork.
-
-NOTICE:
+The iceman fork
+---------------
+NOTICE:
The official Proxmark repository is found here: https://github.com/Proxmark/proxmark3
+NEWS:
+
+::THIS FORK IS HIGHLY EXPERIMENTAL::
-NEWS:
Whats in this fork? I have scraped the web for different enhancements to the PM3 source code and not all of them ever found their way to the master branch.
Among the stuff is
* Jonor's hf 14a raw timing patch
* Piwi's updates. (usually gets into the master)
+ * Piwi's "topaz" branch (not merged)
* Holiman's iclass, (usually gets into the master)
- * Marshmellow's LF fixes
+ * Marshmellow's fixes (usually gets into the master)
* Midnitesnake's Ultralight, Ultralight-c enhancements
* Izsh's lf peak modification / iir-filtering
* Aspers's tips and tricks from inside the PM3-gui-tool, settings.xml and other stuff.
* My own desfire, Ultralight extras, LF T55xx enhancements, bugs fixes (filelength, hf mf commands ), TNP3xxx lua scripts, Awid26, skidata scripts (will come)
* other obscure patches like for the sammy-mode, (offline you know), tagidentifications, defaultkeys.
+ * Minor textual changes here and there.
+ * Simulation of Ultralight/Ntag.
+ * Marshmellow's and my "RevEng" addon for the client. Ref: http://reveng.sourceforge.net/
+ * Someone's alterantive bruteforce Mifare changes.. (you need the two other exe to make it work)
+ *
Give me a hint, and I'll see if I can't merge in the stuff you have.
I do tend to rename and move stuff around, the official PM3-GUI from Gaucho will not work so well. *sorry*
+
DEVELOPMENT:
An old Qt4 version makefile is found here: http://www.icesql.se/proxmark3/code/linuxmakefile.txt but this one doesn't have all new files in it. So I don't recommend it.
+
+
+January 2015, Sweden
+iceman at host iuse.se
+
The Proxmark 3 is available for purchase (assembled and tested) from the
following locations:
+ * http://proxmark3.com/
+ * http://www.xfpga.com/
-January 2015, Sweden
-iceman at host iuse.se
+Most of the ultra-low-volume contract assemblers could put
+something like this together with a reasonable yield. A run of around
+a dozen units is probably cost-effective. The BOM includes (possibly-
+outdated) component pricing, and everything is available from Digikey
+and the usual distributors.
+
+If you've never assembled a modern circuit board by hand, then this is
+not a good place to start. Some of the components (e.g. the crystals)
+must not be assembled with a soldering iron, and require hot air.
+
+The schematics are included; the component values given are not
+necessarily correct for all situations, but it should be possible to do
+nearly anything you would want with appropriate population options.
+
+The printed circuit board artwork is also available, as Gerbers and an
+Excellon drill file.
+
+
+LICENSING:
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Jonathan Westhues
+user jwesthues, at host cq.cx
+
+May 2007, Cambridge MA
projects / proxmark3-svn / blobdiff