int CmdHF14AReader(const char *Cmd)
{
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_DISCONNECT, 0, 0}};
+ clearCommandBuffer();
SendCommand(&c);
-
UsbCommand resp;
WaitForResponse(CMD_ACK,&resp);
c.arg[1] = 0;
c.arg[2] = 0;
+ clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
c.arg[1] = 2;
c.arg[2] = 0;
memcpy(c.d.asBytes, rats, 2);
+ clearCommandBuffer();
SendCommand(&c);
WaitForResponse(CMD_ACK,&resp);
PrintAndLog(" x0 -> <1 kByte");
break;
case 0x01:
- PrintAndLog(" x0 -> 1 kByte");
+ PrintAndLog(" x1 -> 1 kByte");
break;
case 0x02:
- PrintAndLog(" x0 -> 2 kByte");
+ PrintAndLog(" x2 -> 2 kByte");
break;
case 0x03:
- PrintAndLog(" x0 -> 4 kByte");
+ PrintAndLog(" x3 -> 4 kByte");
break;
case 0x04:
- PrintAndLog(" x0 -> 8 kByte");
+ PrintAndLog(" x4 -> 8 kByte");
break;
}
switch (card.ats[pos + 3] & 0xf0) {
// try to see if card responses to "chinese magic backdoor" commands.
+ uint8_t isOK = 0;
+ clearCommandBuffer();
c.cmd = CMD_MIFARE_CIDENT;
c.arg[0] = 0;
c.arg[1] = 0;
c.arg[2] = 0;
SendCommand(&c);
- WaitForResponse(CMD_ACK,&resp);
- uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("Answers to chinese magic backdoor commands: %s", (isOK ? "YES" : "NO") );
+ if (WaitForResponseTimeout(CMD_ACK, &resp, 1500))
+ isOK = resp.arg[0] & 0xff;
+
+ PrintAndLog("Answers to magic commands (GEN1): %s", (isOK ? "YES" : "NO") );
// disconnect
c.cmd = CMD_READER_ISO_14443a;
PrintAndLog(" 4 = ISO/IEC 14443-4");
PrintAndLog(" 5 = MIFARE Tnp3xxx");
PrintAndLog(" 6 = MIFARE Mini");
+ PrintAndLog(" 7 = AMIIBO (NTAG 215), pack 0x8080");
PrintAndLog(" u : 4 or 7 byte UID");
PrintAndLog(" x : (Optional) performs the 'reader attack', nr/ar attack against a legitimate reader");
PrintAndLog("\n sample : hf 14a sim t 1 u 1122344");
int len = (resp.arg[1] > sizeof(data)) ? sizeof(data) : resp.arg[1];
memcpy(data, resp.d.asBytes, len);
tryMfk32(uid, data, key);
+ tryMfk32_moebius(uid, data, key);
//tryMfk64(uid, data, key);
PrintAndLog("--");
}
uint32_t temp;
if (strlen(cmd)<2) {
- PrintAndLog("Usage: hf 14a raw [-r] [-c] [-p] [-a] [-t] <milliseconds> [-b] <number of bits> <0A 0B 0C ... hex>");
+ PrintAndLog("Usage: hf 14a raw [-r] [-c] [-p] [-a] [-T] [-t] <milliseconds> [-b] <number of bits> <0A 0B 0C ... hex>");
PrintAndLog(" -r do not read response");
PrintAndLog(" -c calculate and append CRC");
PrintAndLog(" -p leave the signal field ON after receive");
c.arg[1] = (datalen & 0xFFFF) | (numbits << 16);
memcpy(c.d.asBytes,data,datalen);
+ clearCommandBuffer();
SendCommand(&c);
if (reply) {