]> cvs.zerfleddert.de Git - proxmark3-svn/commitdiff
Merge pull request #9 from Proxmark/master
authorgrauerfuchs <42082416+grauerfuchs@users.noreply.github.com>
Wed, 22 Aug 2018 22:57:48 +0000 (18:57 -0400)
committerGitHub <noreply@github.com>
Wed, 22 Aug 2018 22:57:48 +0000 (18:57 -0400)
Pulling in most recent changes in official code tree

18 files changed:
CHANGELOG.md
armsrc/Makefile
armsrc/appmain.c
armsrc/i2c.c [new file with mode: 0644]
armsrc/i2c.h [new file with mode: 0644]
armsrc/legicrf.c
armsrc/legicrf.h
client/Makefile
client/cmdhf.c
client/cmdmain.c
client/cmdsmartcard.c [new file with mode: 0644]
client/cmdsmartcard.h [new file with mode: 0644]
common/lfdemod.c
common/protocols.h
fpga/hi_read_tx.v
include/legic.h [new file with mode: 0644]
include/smartcard.h [new file with mode: 0644]
include/usb_cmd.h

index 13fc97fb0e1046da64a3300c565a3567c9c4404e..da6463e91bd755c96bc1ba51690ac5d29e51e483 100644 (file)
@@ -17,12 +17,14 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac
 - Changed `hf 14a reader` to just reqest-anticilission-select sequence (Merlok)
 - Changed `hf 14a raw` - works with LED's and some exchange logic (Merlok)
 - Changed TLV parser messages to more convenient (Merlok)
+- Rewritten Legic Prime reader (`hf legic reader`, `write` and `fill`) - it is using xcorrelation now (AntiCat)
 
 ### Fixed
 - Changed start sequence in Qt mode (fix: short commands hangs main Qt thread) (Merlok)
 - Changed driver file proxmark3.inf to support both old and new Product/Vendor IDs (piwi)
 
 ### Added
+- Added `sc` smartcard (contact card) commands - reader, info, raw, upgrade, setclock, list (hardware version RDV4.0 only) must turn option on in makefile options (Willok, Iceman, marshmellow)
 - Added a bitbang mode to `lf cmdread` if delay is 0 the cmd bits turn off and on the antenna with 0 and 1 respectively (marshmellow)
 - Added PAC/Stanley detection to lf search (marshmellow)
 - Added lf pac demod and lf pac read - extracts the raw blocks from a PAC/Stanley tag (marshmellow)
index f0a0c0ffda2c54b976aeef0b2fe467e0dbd85894..d4b13c6bf59066a1a122d13237fb2653292fa3d8 100644 (file)
@@ -15,18 +15,22 @@ APP_CFLAGS  = -DON_DEVICE \
 
 include ../common/Makefile_Enabled_Options.common
 
-ifneq (,$(findstring LCD,$(APP_CFLAGS)))
+ifneq (,$(findstring WITH_LCD,$(APP_CFLAGS)))
         SRC_LCD = fonts.c LCD.c
 else
         SRC_LCD = 
 endif
-#SRC_LCD = fonts.c LCD.c
 SRC_LF = lfops.c hitag2.c hitagS.c lfsampling.c pcf7931.c lfdemod.c protocols.c
 SRC_ISO15693 = iso15693.c iso15693tools.c
 SRC_ISO14443a = epa.c iso14443a.c mifareutil.c mifarecmd.c mifaresniff.c mifaresim.c
 SRC_ISO14443b = iso14443b.c
 SRC_CRAPTO1 = crypto1.c des.c
 SRC_CRC = iso14443crc.c crc.c crc16.c crc32.c parity.c
+ifneq (,$(findstring WITH_SMARTCARD,$(APP_CFLAGS)))
+       SRC_SMARTCARD = i2c.c
+else
+       SRC_SMARTCARD = 
+endif
 #the FPGA bitstream files. Note: order matters!
 FPGA_BITSTREAMS = fpga_lf.bit fpga_hf.bit
 
@@ -44,6 +48,7 @@ THUMBSRC = start.c \
        $(SRC_ISO15693) \
        $(SRC_LF) \
        $(SRC_ZLIB) \
+       $(SRC_SMARTCARD) \
        appmain.c \
        printf.c \
        util.c \
index 27f43b3fae505453b51ff5f5de721c2e3de51af2..4034788afc5f0260bd3545d3ddf4ab5f8201c50e 100644 (file)
 #ifdef WITH_LCD
  #include "LCD.h"
 #endif
+#ifdef WITH_SMARTCARD
+ #include "i2c.h"
+#endif
+
 
 // Craig Young - 14a stand-alone code
 #ifdef WITH_ISO14443a
@@ -357,12 +361,15 @@ void SendStatus(void)
 {
        BigBuf_print_status();
        Fpga_print_status();
+#ifdef WITH_SMARTCARD
+       I2C_print_status();
+#endif
        printConfig(); //LF Sampling config
        printUSBSpeed();
        Dbprintf("Various");
-       Dbprintf("  MF_DBGLEVEL......%d", MF_DBGLEVEL);
-       Dbprintf("  ToSendMax........%d",ToSendMax);
-       Dbprintf("  ToSendBit........%d",ToSendBit);
+       Dbprintf("  MF_DBGLEVEL........%d", MF_DBGLEVEL);
+       Dbprintf("  ToSendMax..........%d", ToSendMax);
+       Dbprintf("  ToSendBit..........%d", ToSendBit);
 
        cmd_send(CMD_ACK,1,0,0,0,0);
 }
@@ -1253,6 +1260,31 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        HfSnoop(c->arg[0], c->arg[1]);
                        break;
 #endif
+#ifdef WITH_SMARTCARD
+               case CMD_SMART_ATR: {
+                       SmartCardAtr();
+                       break;
+               }
+               case CMD_SMART_SETCLOCK:{
+                       SmartCardSetClock(c->arg[0]);
+                       break;
+               }
+               case CMD_SMART_RAW: {
+                       SmartCardRaw(c->arg[0], c->arg[1], c->d.asBytes);
+                       break;
+               }
+               case CMD_SMART_UPLOAD: {
+                       // upload file from client
+                       uint8_t *mem = BigBuf_get_addr();
+                       memcpy( mem + c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
+                       cmd_send(CMD_ACK,1,0,0,0,0);
+                       break;
+               }
+               case CMD_SMART_UPGRADE: {
+                       SmartCardUpgrade(c->arg[0]);
+                       break;
+               }
+#endif
 
                case CMD_BUFF_CLEAR:
                        BigBuf_Clear();
diff --git a/armsrc/i2c.c b/armsrc/i2c.c
new file mode 100644 (file)
index 0000000..721b4b2
--- /dev/null
@@ -0,0 +1,720 @@
+//-----------------------------------------------------------------------------
+// Willok, June 2018
+// Edits by Iceman, July 2018
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// The main i2c code, for communications with smart card module
+//-----------------------------------------------------------------------------
+#include "i2c.h"
+#include "mifareutil.h" //for mf_dbglevel
+#include "string.h"  //for memset memcmp
+
+//     ¶¨ÒåÁ¬½ÓÒý½Å
+#define GPIO_RST  AT91C_PIO_PA1
+#define GPIO_SCL  AT91C_PIO_PA5
+#define GPIO_SDA  AT91C_PIO_PA7
+
+#define SCL_H   HIGH(GPIO_SCL)
+#define SCL_L   LOW(GPIO_SCL)
+#define SDA_H   HIGH(GPIO_SDA)
+#define SDA_L   LOW(GPIO_SDA)
+
+#define SCL_read  (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SCL)
+#define SDA_read  (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SDA)
+
+#define I2C_ERROR  "I2C_WaitAck Error" 
+
+volatile unsigned long c;
+
+//     Ö±½ÓʹÓÃÑ­»·À´ÑÓʱ£¬Ò»¸öÑ­»· 6 ÌõÖ¸Á48M£¬ Delay=1 ´ó¸ÅΪ 200kbps
+// timer.
+// I2CSpinDelayClk(4) = 12.31us
+// I2CSpinDelayClk(1) = 3.07us
+void __attribute__((optimize("O0"))) I2CSpinDelayClk(uint16_t delay) {
+       for (c = delay * 2; c; c--) {};
+}
+
+//     Í¨Ñ¶ÑÓ³Ùº¯Êý     communication delay function   
+#define I2C_DELAY_1CLK    I2CSpinDelayClk(1)
+#define I2C_DELAY_2CLK    I2CSpinDelayClk(2)
+#define I2C_DELAY_XCLK(x) I2CSpinDelayClk((x))
+
+
+#define  ISO7618_MAX_FRAME 255
+
+void I2C_init(void) {
+       // ÅäÖø´Î»Òý½Å£¬¹Ø±ÕÉÏÀ­£¬ÍÆÍìÊä³ö£¬Ä¬Èϸß
+       // Configure reset pin, close up pull up, push-pull output, default high
+       AT91C_BASE_PIOA->PIO_PPUDR = GPIO_RST;
+       AT91C_BASE_PIOA->PIO_MDDR = GPIO_RST;
+
+       // ÅäÖàI2C Òý½Å£¬¿ªÆôÉÏÀ­£¬¿ªÂ©Êä³ö
+       // Configure I2C pin, open up, open leakage
+       AT91C_BASE_PIOA->PIO_PPUER |= (GPIO_SCL | GPIO_SDA);  // ´ò¿ªÉÏÀ­  Open up the pull up
+       AT91C_BASE_PIOA->PIO_MDER |= (GPIO_SCL | GPIO_SDA);
+
+       // Ä¬ÈÏÈý¸ùÏßÈ«²¿À­¸ß
+       // default three lines all pull up
+       AT91C_BASE_PIOA->PIO_SODR |= (GPIO_SCL | GPIO_SDA | GPIO_RST);
+
+       // ÔÊÐíÊä³ö
+       // allow output
+       AT91C_BASE_PIOA->PIO_OER |= (GPIO_SCL | GPIO_SDA | GPIO_RST);
+       AT91C_BASE_PIOA->PIO_PER |= (GPIO_SCL | GPIO_SDA | GPIO_RST);
+}
+
+
+// ÉèÖø´Î»×´Ì¬
+// set the reset state
+void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA) {
+       if (LineRST)
+               HIGH(GPIO_RST);
+       else
+               LOW(GPIO_RST);
+
+       if (LineSCK)
+               HIGH(GPIO_SCL);
+       else
+               LOW(GPIO_SCL);
+
+       if (LineSDA)
+               HIGH(GPIO_SDA);
+       else
+               LOW(GPIO_SDA);
+}
+
+// ¸´Î»½øÈëÖ÷³ÌÐò
+// Reset the SIM_Adapter, then  enter the main program
+// Note: the SIM_Adapter will not enter the main program after power up. Please run this function before use SIM_Adapter.
+void I2C_Reset_EnterMainProgram(void) {
+       I2C_SetResetStatus(0, 0, 0);    // À­µÍ¸´Î»Ïß
+       SpinDelay(30);
+       I2C_SetResetStatus(1, 0, 0);    // ½â³ý¸´Î»
+       SpinDelay(30);
+       I2C_SetResetStatus(1, 1, 1);    // À­¸ßÊý¾ÝÏß
+       SpinDelay(10);
+}
+
+// ¸´Î»½øÈëÒýµ¼Ä£Ê½
+// Reset the SIM_Adapter, then enter the bootloader program
+// Reserve£ºFor firmware update.
+void I2C_Reset_EnterBootloader(void) {
+       I2C_SetResetStatus(0, 1, 1);    // À­µÍ¸´Î»Ïß
+       SpinDelay(100);
+       I2C_SetResetStatus(1, 1, 1);    // ½â³ý¸´Î»
+       SpinDelay(10);
+}
+
+//     µÈ´ýʱÖÓ±ä¸ß    
+// Wait for the clock to go High.      
+bool WaitSCL_H_delay(uint32_t delay) {
+       while (delay--) {
+               if (SCL_read) {
+                       return true;
+               }
+               I2C_DELAY_1CLK;
+       }
+       return false;
+}
+
+// 5000 * 3.07us = 15350us. 15.35ms
+bool WaitSCL_H(void) {
+       return WaitSCL_H_delay(5000);
+}
+
+// Wait max 300ms or until SCL goes LOW.
+// Which ever comes first
+bool WaitSCL_L_300ms(void) {
+       volatile uint16_t delay = 300;
+       while ( delay-- ) {
+               // exit on SCL LOW
+               if (!SCL_read)
+                       return true;
+
+               SpinDelay(1);
+       }
+       return (delay == 0);
+}
+
+bool I2C_Start(void) {
+
+       I2C_DELAY_XCLK(4);
+       SDA_H; I2C_DELAY_1CLK;
+       SCL_H;
+       if (!WaitSCL_H()) return false;
+
+       I2C_DELAY_2CLK;
+
+       if (!SCL_read) return false;
+       if (!SDA_read) return false;
+
+       SDA_L; I2C_DELAY_2CLK;
+       return true;
+}
+
+bool I2C_WaitForSim() {
+       // variable delay here.
+       if (!WaitSCL_L_300ms())
+               return false;
+
+       // 8051 speaks with smart card.
+       // 1000*50*3.07 = 153.5ms
+       // 1byte transfer == 1ms
+       if (!WaitSCL_H_delay(2000*50) )
+               return false;
+
+       return true;
+}
+
+// send i2c STOP
+void I2C_Stop(void) {
+       SCL_L; I2C_DELAY_2CLK;
+       SDA_L; I2C_DELAY_2CLK;
+       SCL_H; I2C_DELAY_2CLK;
+       if (!WaitSCL_H()) return;
+       SDA_H;
+       I2C_DELAY_XCLK(8);
+}
+
+// Send i2c ACK
+void I2C_Ack(void) {
+       SCL_L; I2C_DELAY_2CLK;
+       SDA_L; I2C_DELAY_2CLK;
+       SCL_H; I2C_DELAY_2CLK;
+       SCL_L; I2C_DELAY_2CLK;
+}
+
+// Send i2c NACK
+void I2C_NoAck(void) {
+       SCL_L; I2C_DELAY_2CLK;
+       SDA_H; I2C_DELAY_2CLK;
+       SCL_H; I2C_DELAY_2CLK;
+       SCL_L; I2C_DELAY_2CLK;
+}
+
+bool I2C_WaitAck(void) {
+       SCL_L; I2C_DELAY_1CLK;
+       SDA_H; I2C_DELAY_1CLK;
+       SCL_H;
+       if (!WaitSCL_H())
+               return false;
+
+       I2C_DELAY_2CLK;
+       if (SDA_read) {
+               SCL_L;
+               return false;
+       }
+       SCL_L;
+       return true;
+}
+
+void I2C_SendByte(uint8_t data) {
+       uint8_t i = 8;
+
+       while (i--) {
+               SCL_L; I2C_DELAY_1CLK;
+
+               if (data & 0x80)
+                       SDA_H;
+               else
+                       SDA_L;
+
+               data <<= 1;
+               I2C_DELAY_1CLK;
+
+               SCL_H;
+               if (!WaitSCL_H())
+                       return;
+
+               I2C_DELAY_2CLK;
+       }
+       SCL_L;
+}
+
+uint8_t I2C_ReadByte(void) {
+       uint8_t i = 8, b = 0;
+
+       SDA_H;
+       while (i--) {
+               b <<= 1;
+               SCL_L; I2C_DELAY_2CLK;
+               SCL_H;
+               if (!WaitSCL_H())
+                       return 0;
+
+               I2C_DELAY_2CLK;
+               if (SDA_read)
+                       b |= 0x01;
+       }
+       SCL_L;
+       return b;
+}
+
+// Sends one byte  ( command to be written, SlaveDevice address)
+bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address) {
+       bool bBreak = true;
+       do {
+               if (!I2C_Start())
+                       return false;
+               //[C0]
+               I2C_SendByte(device_address & 0xFE);
+               if (!I2C_WaitAck())
+                       break;
+
+               I2C_SendByte(device_cmd);
+               if (!I2C_WaitAck())
+                       break;
+
+               bBreak = false;
+       } while (false);
+
+       I2C_Stop();
+       if (bBreak) {
+               if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+               return false;
+       }
+       return true;
+}
+
+// Ð´Èë1×Ö½ÚÊý¾Ý £¨´ýдÈëÊý¾Ý£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£©
+// Sends 1 byte data (Data to be written, command to be written , SlaveDevice address  ).
+bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address) {
+       bool bBreak = true;
+       do {
+               if (!I2C_Start())
+                       return false;
+
+               I2C_SendByte(device_address & 0xFE);
+               if (!I2C_WaitAck())
+                       break;
+
+               I2C_SendByte(device_cmd);
+               if (!I2C_WaitAck())
+                       break;
+
+               I2C_SendByte(data);
+               if (!I2C_WaitAck())
+                       break;
+
+               bBreak = false;
+       } while (false);
+
+       I2C_Stop();
+       if (bBreak) {
+               if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+               return false;
+       }
+       return true;
+}
+
+//     Ð´Èë1´®Êý¾Ý£¨´ýдÈëÊý×éµØÖ·£¬´ýдÈ볤¶È£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£© 
+//Sends a string of data (Array, length, command to be written , SlaveDevice address  ).
+// len = uint8 (max buffer to write 256bytes)
+bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) {
+       bool bBreak = true;
+       do {
+               if (!I2C_Start())
+                       return false;
+
+               I2C_SendByte(device_address & 0xFE);
+               if (!I2C_WaitAck())
+                       break;
+
+               I2C_SendByte(device_cmd);
+               if (!I2C_WaitAck())
+                       break;
+
+               while (len) {
+                       
+                       I2C_SendByte(*data);
+                       if (!I2C_WaitAck())
+                               break;
+
+                       len--;
+                       data++;
+               }
+
+               if (len == 0)
+                       bBreak = false;
+       } while (false);
+
+       I2C_Stop();
+       if (bBreak) {
+               if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+               return false;
+       }
+       return true;
+}
+
+// ¶Á³ö1´®Êý¾Ý£¨´æ·Å¶Á³öÊý¾Ý£¬´ý¶Á³ö³¤¶È£¬´ø¶Á³öµØÖ·£¬Æ÷¼þÀàÐÍ£©
+// read 1 strings of data (Data array, Readout length, command to be written , SlaveDevice address  ).
+// len = uint8 (max buffer to read 256bytes)
+uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) {
+
+       if ( !data || len == 0 )
+               return 0;
+
+       // extra wait  500us (514us measured)
+       // 200us  (xx measured)
+       SpinDelayUs(200);
+       bool bBreak = true;
+       uint8_t readcount = 0;
+
+       do {
+               if (!I2C_Start())
+                       return 0;
+
+               // 0xB0 / 0xC0  == i2c write
+               I2C_SendByte(device_address & 0xFE);
+               if (!I2C_WaitAck())
+                       break;
+
+               I2C_SendByte(device_cmd);
+               if (!I2C_WaitAck())
+                       break;
+
+               // 0xB1 / 0xC1 == i2c read
+               I2C_Start();
+               I2C_SendByte(device_address | 1);
+               if (!I2C_WaitAck())
+                       break;
+
+               bBreak = false;
+       } while (false);
+
+       if (bBreak) {
+               I2C_Stop();
+               if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+               return 0;
+       }
+
+       // reading
+       while (len) {
+
+               *data = I2C_ReadByte();
+
+               len--;
+
+               // ¶ÁÈ¡µÄµÚÒ»¸ö×Ö½ÚΪºóÐø³¤¶È   
+               // The first byte in response is the message length
+               if (!readcount && (len > *data)) {
+                       len = *data;
+               } else {
+                       data++;
+               }
+               readcount++;
+
+               // acknowledgements. After last byte send NACK.
+               if (len == 0)
+                       I2C_NoAck();
+               else
+                       I2C_Ack();
+       }
+
+       I2C_Stop();
+       // return bytecount - first byte (which is length byte)
+       return (readcount) ? --readcount : 0;
+}
+
+uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) {
+       //START, 0xB0, 0x00, 0x00, START, 0xB1, xx, yy, zz, ......, STOP        
+       bool bBreak = true;
+       uint8_t readcount = 0;
+
+       // sending
+       do {
+               if (!I2C_Start())
+                       return 0;
+
+               // 0xB0 / 0xC0  i2c write
+               I2C_SendByte(device_address & 0xFE);
+               if (!I2C_WaitAck())
+                       break;
+
+               // msb
+               I2C_SendByte(msb);
+               if (!I2C_WaitAck())
+                       break;
+
+               // lsb
+               I2C_SendByte(lsb);
+               if (!I2C_WaitAck())
+                       break;
+               
+               // 0xB1 / 0xC1  i2c read
+               I2C_Start();
+               I2C_SendByte(device_address | 1);
+               if (!I2C_WaitAck())
+                       break;
+
+               bBreak = false;
+       } while (false);
+
+       if (bBreak) {
+               I2C_Stop();
+               if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+               return 0;
+       }
+
+       // reading
+       while (len) {
+               *data = I2C_ReadByte();
+
+               data++;
+               readcount++;
+               len--;
+
+               // acknowledgements. After last byte send NACK.         
+               if (len == 0)
+                       I2C_NoAck();
+               else
+                       I2C_Ack();
+       }
+
+       I2C_Stop();
+       return readcount;
+}
+
+bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) {
+       //START, 0xB0, 0x00, 0x00, xx, yy, zz, ......, STOP     
+       bool bBreak = true;
+
+       do {
+               if (!I2C_Start())
+                       return false;
+
+               // 0xB0  == i2c write
+               I2C_SendByte(device_address & 0xFE);
+               if (!I2C_WaitAck())
+                       break;
+
+               // msb
+               I2C_SendByte(msb);
+               if (!I2C_WaitAck())
+                       break;
+
+               // lsb
+               I2C_SendByte(lsb);
+               if (!I2C_WaitAck())
+                       break;
+
+               while (len) {
+                       I2C_SendByte(*data);
+                       if (!I2C_WaitAck())
+                               break;
+
+                       len--;
+                       data++;
+               }
+
+               if (len == 0)
+                       bBreak = false;
+       } while (false);
+
+       I2C_Stop();
+       if (bBreak) {
+               if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+               return false;
+       }
+       return true;
+}
+
+void I2C_print_status(void) {
+       DbpString("Smart card module (ISO 7816)");
+       uint8_t resp[] = {0,0,0,0};
+       I2C_init();
+       I2C_Reset_EnterMainProgram();
+       uint8_t len = I2C_BufferRead(resp, sizeof(resp), I2C_DEVICE_CMD_GETVERSION, I2C_DEVICE_ADDRESS_MAIN);
+       if ( len > 0 )
+               Dbprintf("  version.................v%x.%02x", resp[0], resp[1]);
+       else
+               DbpString("  version.................FAILED");
+}
+
+bool GetATR(smart_card_atr_t *card_ptr) {
+
+       // clear 
+       if ( card_ptr ) {
+               card_ptr->atr_len = 0;
+               memset(card_ptr->atr, 0, sizeof(card_ptr->atr));
+       }
+
+       // Send ATR
+       // start [C0 01] stop start C1 len aa bb cc stop]
+       I2C_WriteCmd(I2C_DEVICE_CMD_GENERATE_ATR, I2C_DEVICE_ADDRESS_MAIN);
+       uint8_t cmd[1] = {1};
+       LogTrace(cmd, 1, 0, 0, NULL, true);
+
+       //wait for sim card to answer.
+       if (!I2C_WaitForSim()) 
+               return false;
+
+       // read answer
+       uint8_t len = I2C_BufferRead(card_ptr->atr, sizeof(card_ptr->atr), I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
+
+       if ( len == 0 )
+               return false;
+
+       // for some reason we only get first byte of atr, if that is so, send dummy command to retrieve the rest of the atr 
+       if (len == 1) {
+
+               uint8_t data[1] = {0};
+               I2C_BufferWrite(data, len, I2C_DEVICE_CMD_SEND, I2C_DEVICE_ADDRESS_MAIN);
+
+               if ( !I2C_WaitForSim() )
+                       return false;
+
+               uint8_t len2 = I2C_BufferRead(card_ptr->atr + len, sizeof(card_ptr->atr) - len, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
+               len = len + len2;
+       }
+
+       if ( card_ptr ) {
+               card_ptr->atr_len = len;
+               LogTrace(card_ptr->atr, card_ptr->atr_len, 0, 0, NULL, false);
+       }
+
+       return true;
+}
+
+void SmartCardAtr(void) {
+       smart_card_atr_t card;
+       LED_D_ON();
+       clear_trace();
+       set_tracing(true);
+       I2C_init();
+       I2C_Reset_EnterMainProgram();
+       bool isOK = GetATR( &card );
+       cmd_send(CMD_ACK, isOK, sizeof(smart_card_atr_t), 0, &card, sizeof(smart_card_atr_t));
+       set_tracing(false);
+       LEDsoff();
+}
+
+void SmartCardRaw( uint64_t arg0, uint64_t arg1, uint8_t *data ) {
+
+       LED_D_ON();
+
+       uint8_t len = 0;
+       uint8_t *resp = BigBuf_malloc(ISO7618_MAX_FRAME);
+       smartcard_command_t flags = arg0;
+
+       if ((flags & SC_CONNECT))
+               clear_trace();
+
+       set_tracing(true);
+
+       if ((flags & SC_CONNECT)) {     
+
+               I2C_init();
+               I2C_Reset_EnterMainProgram();
+
+               if ( !(flags & SC_NO_SELECT) ) {
+                       smart_card_atr_t card;
+                       bool gotATR = GetATR( &card );
+                       //cmd_send(CMD_ACK, gotATR, sizeof(smart_card_atr_t), 0, &card, sizeof(smart_card_atr_t));
+                       if ( !gotATR )
+                               goto OUT;
+               }
+       }
+
+       if ((flags & SC_RAW)) {
+
+               LogTrace(data, arg1, 0, 0, NULL, true);
+
+               // Send raw bytes
+               // asBytes = A0 A4 00 00 02
+               // arg1 = len 5
+               I2C_BufferWrite(data, arg1, I2C_DEVICE_CMD_SEND, I2C_DEVICE_ADDRESS_MAIN);
+
+               if ( !I2C_WaitForSim() )
+                       goto OUT;
+
+               len = I2C_BufferRead(resp, ISO7618_MAX_FRAME, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
+               LogTrace(resp, len, 0, 0, NULL, false);
+       }
+OUT:
+       cmd_send(CMD_ACK, len, 0, 0, resp, len);
+       set_tracing(false);
+       LEDsoff();
+}
+
+void SmartCardUpgrade(uint64_t arg0) {
+
+       LED_C_ON();
+
+       #define I2C_BLOCK_SIZE 128
+       // write.   Sector0,  with 11,22,33,44
+       // erase is 128bytes, and takes 50ms to execute
+
+       I2C_init();
+       I2C_Reset_EnterBootloader();
+
+       bool isOK = true;
+       uint8_t res = 0;
+       uint16_t length = arg0;
+       uint16_t pos = 0;
+       uint8_t *fwdata = BigBuf_get_addr();
+       uint8_t *verfiydata = BigBuf_malloc(I2C_BLOCK_SIZE);
+
+       while (length) {
+
+               uint8_t msb = (pos >> 8) & 0xFF;
+               uint8_t lsb = pos & 0xFF;
+
+               Dbprintf("FW %02X%02X", msb, lsb);
+
+               size_t size = MIN(I2C_BLOCK_SIZE, length);
+
+               // write
+               res = I2C_WriteFW(fwdata+pos, size, msb, lsb, I2C_DEVICE_ADDRESS_BOOT);
+               if ( !res ) {
+                       DbpString("Writing failed");
+                       isOK = false;
+                       break;
+               }
+
+               // writing takes time.
+               SpinDelay(50);
+
+               // read
+               res = I2C_ReadFW(verfiydata, size, msb, lsb, I2C_DEVICE_ADDRESS_BOOT);
+               if ( res == 0) {
+                       DbpString("Reading back failed");
+                       isOK = false;
+                       break;
+               }
+
+               // cmp
+               if ( 0 != memcmp(fwdata+pos, verfiydata, size)) {
+                       DbpString("not equal data");
+                       isOK = false;
+                       break;
+               }
+
+               length -= size;
+               pos += size;
+       }
+       cmd_send(CMD_ACK, isOK, pos, 0, 0, 0);
+       LED_C_OFF();
+}
+
+// unfinished (or not needed?)
+//void SmartCardSetBaud(uint64_t arg0) {
+//}
+
+void SmartCardSetClock(uint64_t arg0) {
+       LED_D_ON();
+       set_tracing(true);
+       I2C_init();
+       I2C_Reset_EnterMainProgram();
+
+       // Send SIM CLC
+       // start [C0 05 xx] stop
+       I2C_WriteByte(arg0, I2C_DEVICE_CMD_SIM_CLC, I2C_DEVICE_ADDRESS_MAIN);
+
+       cmd_send(CMD_ACK, 1, 0, 0, 0, 0);
+       set_tracing(false);
+       LEDsoff();
+}
diff --git a/armsrc/i2c.h b/armsrc/i2c.h
new file mode 100644 (file)
index 0000000..4c5c522
--- /dev/null
@@ -0,0 +1,58 @@
+//-----------------------------------------------------------------------------
+// Willok, June 2018
+// Edits by Iceman, July 2018
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// The main i2c code, for communications with smart card module
+//-----------------------------------------------------------------------------
+#ifndef __I2C_H
+#define __I2C_H
+
+#include <stddef.h>
+#include "proxmark3.h"
+#include "apps.h"
+#include "util.h"
+#include "BigBuf.h"
+#include "smartcard.h"
+
+#define I2C_DEVICE_ADDRESS_BOOT       0xB0
+#define I2C_DEVICE_ADDRESS_MAIN       0xC0
+
+#define I2C_DEVICE_CMD_GENERATE_ATR   0x01
+#define I2C_DEVICE_CMD_SEND           0x02
+#define I2C_DEVICE_CMD_READ           0x03
+#define I2C_DEVICE_CMD_SETBAUD        0x04
+#define I2C_DEVICE_CMD_SIM_CLC        0x05
+#define I2C_DEVICE_CMD_GETVERSION     0x06
+
+
+void I2C_init(void);
+void I2C_Reset(void);
+void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA);
+
+void I2C_Reset_EnterMainProgram(void);
+void I2C_Reset_EnterBootloader(void);
+
+bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address);
+
+bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address);
+bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address);
+uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address);
+
+// for firmware
+uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address);
+bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address);
+
+bool GetATR(smart_card_atr_t *card_ptr);
+
+// generic functions
+void SmartCardAtr(void);
+void SmartCardRaw(uint64_t arg0, uint64_t arg1, uint8_t *data);
+void SmartCardUpgrade(uint64_t arg0);
+//void SmartCardSetBaud(uint64_t arg0);
+void SmartCardSetClock(uint64_t arg0);
+void I2C_print_status(void);
+#endif
index 27dcc29733ef40d2e30bedbcde01a9dcf97a2abe..2a236b6ff9e04ad0d6373560a4f20aea08ccf5b5 100644 (file)
@@ -1,5 +1,7 @@
 //-----------------------------------------------------------------------------
 // (c) 2009 Henryk Plötz <henryk@ploetzli.ch>
+//     2016 Iceman
+//     2018 AntiCat (rwd rewritten)
 //
 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
 // at your option, any later version. See the LICENSE.txt file for the text of
@@ -15,6 +17,7 @@
 
 #include "legicrf.h"
 #include "legic_prng.h"
+#include "legic.h"
 #include "crc.h"
 
 static struct legic_frame {
@@ -40,6 +43,460 @@ static int      legic_reqresp_drift;
 AT91PS_TC timer;
 AT91PS_TC prng_timer;
 
+static legic_card_select_t card;/* metadata of currently selected card */
+
+//-----------------------------------------------------------------------------
+// Frame timing and pseudorandom number generator
+//
+// The Prng is forwarded every 100us (TAG_BIT_PERIOD), except when the reader is
+// transmitting. In that case the prng has to be forwarded every bit transmitted:
+//  - 60us for a 0 (RWD_TIME_0)
+//  - 100us for a 1 (RWD_TIME_1)
+//
+// The data dependent timing makes writing comprehensible code significantly
+// harder. The current aproach forwards the prng data based if there is data on
+// air and time based, using GET_TICKS, during computational and wait periodes.
+//
+// To not have the necessity to calculate/guess exection time dependend timeouts
+// tx_frame and rx_frame use a shared timestamp to coordinate tx and rx timeslots.
+//-----------------------------------------------------------------------------
+
+static uint32_t last_frame_end; /* ts of last bit of previews rx or tx frame */
+
+#define RWD_TIME_PAUSE       30 /* 20us */
+#define RWD_TIME_1          150 /* READER_TIME_PAUSE 20us off + 80us on = 100us */
+#define RWD_TIME_0           90 /* READER_TIME_PAUSE 20us off + 40us on = 60us */
+#define RWD_FRAME_WAIT      330 /* 220us from TAG frame end to READER frame start */
+#define TAG_FRAME_WAIT      495 /* 330us from READER frame end to TAG frame start */
+#define TAG_BIT_PERIOD      150 /* 100us */
+#define TAG_WRITE_TIMEOUT    60 /* 40 * 100us (write should take at most 3.6ms) */
+
+#define SIM_DIVISOR         586 /* prng_time/DIV count prng needs to be forwared */
+#define SIM_SHIFT           900 /* prng_time+SHIFT shift of delayed start */
+#define RWD_TIME_FUZZ        20 /* rather generous 13us, since the peak detector
+                                /+ hysteresis fuzz quite a bit */
+
+#define LEGIC_READ         0x01 /* Read Command */
+#define LEGIC_WRITE        0x00 /* Write Command */
+
+#define SESSION_IV         0x55 /* An arbitrary chose session IV, all shoud work */
+#define OFFSET_LOG         1024 /* The largest Legic Prime card is 1k */
+#define WRITE_LOWERLIMIT      4 /* UID and MCC are not writable */
+
+#define INPUT_THRESHOLD       8 /* heuristically determined, lower values */
+                                /* lead to detecting false ack during write */
+
+#define FUZZ_EQUAL(value, target, fuzz) ((value) > ((target)-(fuzz)) && (value) < ((target)+(fuzz)))
+
+//-----------------------------------------------------------------------------
+// I/O interface abstraction (FPGA -> ARM)
+//-----------------------------------------------------------------------------
+
+static inline uint8_t rx_byte_from_fpga() {
+  for(;;) {
+    WDT_HIT();
+
+    // wait for byte be become available in rx holding register
+    if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
+      return AT91C_BASE_SSC->SSC_RHR;
+    }
+  }
+}
+
+//-----------------------------------------------------------------------------
+// Demodulation (Reader)
+//-----------------------------------------------------------------------------
+
+// Returns a demedulated bit
+//
+// The FPGA running xcorrelation samples the subcarrier at ~13.56 MHz. The mode
+// was initialy designed to receive BSPK/2-PSK. Hance, it reports an I/Q pair
+// every 4.7us (8 bits i and 8 bits q).
+//
+// The subcarrier amplitude can be calculated using Pythagoras sqrt(i^2 + q^2).
+// To reduce CPU time the amplitude is approximated by using linear functions:
+//   am = MAX(ABS(i),ABS(q)) + 1/2*MIN(ABS(i),ABSq))
+//
+// Note: The SSC receiver is never synchronized the calculation my be performed
+// on a I/Q pair from two subsequent correlations, but does not matter.
+//
+// The bit time is 99.1us (21 I/Q pairs). The receiver skips the first 5 samples
+// and averages the next (most stable) 8 samples. The final 8 samples are dropped
+// also.
+//
+// The demedulated should be alligned to the bit periode by the caller. This is
+// done in rx_bit_as_reader and rx_ack_as_reader.
+static inline bool rx_bit_as_reader() {
+  int32_t cq = 0;
+  int32_t ci = 0;
+
+  // skip first 5 I/Q pairs
+  for(size_t i = 0; i<5; ++i) {
+    (int8_t)rx_byte_from_fpga();
+    (int8_t)rx_byte_from_fpga();
+  }
+
+  // sample next 8 I/Q pairs
+  for(size_t i = 0; i<8; ++i) {
+    cq += (int8_t)rx_byte_from_fpga();
+    ci += (int8_t)rx_byte_from_fpga();
+  }
+
+  // calculate power
+  int32_t power = (MAX(ABS(ci), ABS(cq)) + (MIN(ABS(ci), ABS(cq)) >> 1));
+
+  // compare average (power / 8) to threshold
+  return ((power >> 3) > INPUT_THRESHOLD);
+}
+
+//-----------------------------------------------------------------------------
+// Modulation (Reader)
+//
+// I've tried to modulate the Legic specific pause-puls using ssc and the default
+// ssc clock of 105.4 kHz (bit periode of 9.4us) - previous commit. However,
+// the timing was not precise enough. By increasing the ssc clock this could
+// be circumvented, but the adventage over bitbang would be little.
+//-----------------------------------------------------------------------------
+
+static inline void tx_bit_as_reader(bool bit) {
+  // insert pause
+  LOW(GPIO_SSC_DOUT);
+  last_frame_end += RWD_TIME_PAUSE;
+  while(GET_TICKS < last_frame_end) { };
+  HIGH(GPIO_SSC_DOUT);
+
+  // return to high, wait for bit periode to end
+  last_frame_end += (bit ? RWD_TIME_1 : RWD_TIME_0) - RWD_TIME_PAUSE;
+  while(GET_TICKS < last_frame_end) { };
+}
+
+//-----------------------------------------------------------------------------
+// Frame Handling (Reader)
+//
+// The LEGIC RF protocol from card to reader does not include explicit frame
+// start/stop information or length information. The reader must know beforehand
+// how many bits it wants to receive.
+// Notably: a card sending a stream of 0-bits is indistinguishable from no card
+// present.
+//-----------------------------------------------------------------------------
+
+static void tx_frame_as_reader(uint32_t frame, uint8_t len) {
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX);
+
+  // wait for next tx timeslot
+  last_frame_end += RWD_FRAME_WAIT;
+  while(GET_TICKS < last_frame_end) { };
+
+  // transmit frame, MSB first
+  for(uint8_t i = 0; i < len; ++i) {
+    bool bit = (frame >> i) & 0x01;
+    tx_bit_as_reader(bit ^ legic_prng_get_bit());
+    legic_prng_forward(1);
+  };
+
+  // add pause to mark end of the frame
+  LOW(GPIO_SSC_DOUT);
+  last_frame_end += RWD_TIME_PAUSE;
+  while(GET_TICKS < last_frame_end) { };
+  HIGH(GPIO_SSC_DOUT);
+}
+
+static uint32_t rx_frame_as_reader(uint8_t len) {
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR
+                  | FPGA_HF_READER_RX_XCORR_848_KHZ
+                  | FPGA_HF_READER_RX_XCORR_QUARTER_FREQ);
+
+  // hold sampling until card is expected to respond
+  last_frame_end += TAG_FRAME_WAIT;
+  while(GET_TICKS < last_frame_end) { };
+
+  uint32_t frame = 0;
+  for(uint8_t i = 0; i < len; i++) {
+    frame |= (rx_bit_as_reader() ^ legic_prng_get_bit()) << i;
+    legic_prng_forward(1);
+
+    // rx_bit_as_reader runs only 95us, resync to TAG_BIT_PERIOD
+    last_frame_end += TAG_BIT_PERIOD;
+    while(GET_TICKS < last_frame_end) { };
+  }
+
+  return frame;
+}
+
+static bool rx_ack_as_reader() {
+  // change fpga into rx mode
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR
+                  | FPGA_HF_READER_RX_XCORR_848_KHZ
+                  | FPGA_HF_READER_RX_XCORR_QUARTER_FREQ);
+
+  // hold sampling until card is expected to respond
+  last_frame_end += TAG_FRAME_WAIT;
+  while(GET_TICKS < last_frame_end) { };
+
+  uint32_t ack = 0;
+  for(uint8_t i = 0; i < TAG_WRITE_TIMEOUT; ++i) {
+    // sample bit
+    ack = rx_bit_as_reader();
+    legic_prng_forward(1);
+
+    // rx_bit_as_reader runs only 95us, resync to TAG_BIT_PERIOD
+    last_frame_end += TAG_BIT_PERIOD;
+    while(GET_TICKS < last_frame_end) { };
+
+    // check if it was an ACK
+    if(ack) {
+      break;
+    }
+  }
+
+  return ack;
+}
+
+//-----------------------------------------------------------------------------
+// Legic Reader
+//-----------------------------------------------------------------------------
+
+int init_card(uint8_t cardtype, legic_card_select_t *p_card) {
+  p_card->tagtype = cardtype;
+
+  switch(p_card->tagtype) {
+    case 0x0d:
+      p_card->cmdsize = 6;
+      p_card->addrsize = 5;
+      p_card->cardsize = 22;
+      break;
+    case 0x1d:
+      p_card->cmdsize = 9;
+      p_card->addrsize = 8;
+      p_card->cardsize = 256;
+      break;
+    case 0x3d:
+      p_card->cmdsize = 11;
+      p_card->addrsize = 10;
+      p_card->cardsize = 1024;
+      break;
+    default:
+      p_card->cmdsize = 0;
+      p_card->addrsize = 0;
+      p_card->cardsize = 0;
+      return 2;
+  }
+  return 0;
+}
+
+static void init_reader(bool clear_mem) {
+  // configure FPGA
+  FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR
+                  | FPGA_HF_READER_RX_XCORR_848_KHZ
+                  | FPGA_HF_READER_RX_XCORR_QUARTER_FREQ);
+  SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
+  LED_D_ON();
+
+  // configure SSC with defaults
+  FpgaSetupSsc();
+
+  // re-claim GPIO_SSC_DOUT as GPIO and enable output
+  AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
+  AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
+  HIGH(GPIO_SSC_DOUT);
+
+  // init crc calculator
+  crc_init(&legic_crc, 4, 0x19 >> 1, 0x05, 0);
+
+  // start us timer
+  StartTicks();
+}
+
+// Setup reader to card connection
+//
+// The setup consists of a three way handshake:
+//  - Transmit initialisation vector 7 bits
+//  - Receive card type 6 bits
+//  - Acknowledge frame 6 bits
+static uint32_t setup_phase_reader(uint8_t iv) {
+  // init coordination timestamp
+  last_frame_end = GET_TICKS;
+
+  // Switch on carrier and let the card charge for 5ms.
+  last_frame_end += 7500;
+  while(GET_TICKS < last_frame_end) { };
+
+  legic_prng_init(0);
+  tx_frame_as_reader(iv, 7);
+
+  // configure iv
+  legic_prng_init(iv);
+  legic_prng_forward(2);
+
+  // receive card type
+  int32_t card_type = rx_frame_as_reader(6);
+  legic_prng_forward(3);
+
+  // send obsfuscated acknowledgment frame
+  switch (card_type) {
+    case 0x0D:
+      tx_frame_as_reader(0x19, 6); // MIM22 | READCMD = 0x18 | 0x01
+      break;
+    case 0x1D:
+    case 0x3D:
+      tx_frame_as_reader(0x39, 6); // MIM256 | READCMD = 0x38 | 0x01
+      break;
+  }
+
+  return card_type;
+}
+
+static uint8_t calc_crc4(uint16_t cmd, uint8_t cmd_sz, uint8_t value) {
+  crc_clear(&legic_crc);
+  crc_update(&legic_crc, (value << cmd_sz) | cmd, 8 + cmd_sz);
+  return crc_finish(&legic_crc);
+}
+
+static int16_t read_byte(uint16_t index, uint8_t cmd_sz) {
+  uint16_t cmd = (index << 1) | LEGIC_READ;
+
+  // read one byte
+  LED_B_ON();
+  legic_prng_forward(2);
+  tx_frame_as_reader(cmd, cmd_sz);
+  legic_prng_forward(2);
+  uint32_t frame = rx_frame_as_reader(12);
+  LED_B_OFF();
+
+  // split frame into data and crc
+  uint8_t byte = BYTEx(frame, 0);
+  uint8_t crc = BYTEx(frame, 1);
+
+  // check received against calculated crc
+  uint8_t calc_crc = calc_crc4(cmd, cmd_sz, byte);
+  if(calc_crc != crc) {
+    Dbprintf("!!! crc mismatch: %x != %x !!!",  calc_crc, crc);
+    return -1;
+  }
+
+  legic_prng_forward(1);
+
+  return byte;
+}
+
+// Transmit write command, wait until (3.6ms) the tag sends back an unencrypted
+// ACK ('1' bit) and forward the prng time based.
+bool write_byte(uint16_t index, uint8_t byte, uint8_t addr_sz) {
+  uint32_t cmd = index << 1 | LEGIC_WRITE;          // prepare command
+  uint8_t  crc = calc_crc4(cmd, addr_sz + 1, byte); // calculate crc
+  cmd |= byte << (addr_sz + 1);                     // append value
+  cmd |= (crc & 0xF) << (addr_sz + 1 + 8);          // and crc
+
+  // send write command
+  LED_C_ON();
+  legic_prng_forward(2);
+  tx_frame_as_reader(cmd, addr_sz + 1 + 8 + 4); // sz = addr_sz + cmd + data + crc
+  legic_prng_forward(3);
+  LED_C_OFF();
+
+  // wait for ack
+  return rx_ack_as_reader();
+}
+
+//-----------------------------------------------------------------------------
+// Command Line Interface
+//
+// Only this functions are public / called from appmain.c
+//-----------------------------------------------------------------------------
+void LegicRfReader(int offset, int bytes) {
+  uint8_t *BigBuf = BigBuf_get_addr();
+  memset(BigBuf, 0, 1024);
+
+  // configure ARM and FPGA
+  init_reader(false);
+
+  // establish shared secret and detect card type
+  DbpString("Reading card ...");
+  uint8_t card_type = setup_phase_reader(SESSION_IV);
+  if(init_card(card_type, &card) != 0) {
+    Dbprintf("No or unknown card found, aborting");
+    goto OUT;
+  }
+
+  // if no argument is specified create full dump
+  if(bytes == -1) {
+    bytes = card.cardsize;
+  }
+
+  // do not read beyond card memory
+  if(bytes + offset > card.cardsize) {
+    bytes = card.cardsize - offset;
+  }
+
+  for(uint16_t i = 0; i < bytes; ++i) {
+    int16_t byte = read_byte(offset + i, card.cmdsize);
+    if(byte == -1) {
+      Dbprintf("operation failed @ 0x%03.3x", bytes);
+      goto OUT;
+    }
+    BigBuf[i] = byte;
+  }
+
+  // OK
+  Dbprintf("Card (MIM %i) read, use 'hf legic decode' or", card.cardsize);
+  Dbprintf("'data hexsamples %d' to view results", (bytes+7) & ~7);
+
+OUT:
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+  LED_B_OFF();
+  LED_C_OFF();
+  LED_D_OFF();
+  StopTicks();
+}
+
+void LegicRfWriter(int bytes, int offset) {
+  uint8_t *BigBuf = BigBuf_get_addr();
+
+  // configure ARM and FPGA
+  init_reader(false);
+
+  // uid is not writeable
+  if(offset <= WRITE_LOWERLIMIT) {
+    goto OUT;
+  }
+
+  // establish shared secret and detect card type
+  Dbprintf("Writing 0x%02.2x - 0x%02.2x ...", offset, offset+bytes);
+  uint8_t card_type = setup_phase_reader(SESSION_IV);
+  if(init_card(card_type, &card) != 0) {
+    Dbprintf("No or unknown card found, aborting");
+    goto OUT;
+  }
+
+  // do not write beyond card memory
+  if(bytes + offset > card.cardsize) {
+    bytes = card.cardsize - offset;
+  }
+
+  // write in reverse order, only then is DCF (decremental field) writable
+  while(bytes-- > 0 && !BUTTON_PRESS()) {
+    if(!write_byte(bytes + offset, BigBuf[bytes + offset], card.addrsize)) {
+      Dbprintf("operation failed @ 0x%03.3x", bytes);
+      goto OUT;
+    }
+  }
+
+  // OK
+  DbpString("Write successful");
+
+OUT:
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+  LED_B_OFF();
+  LED_C_OFF();
+  LED_D_OFF();
+  StopTicks();
+}
+
+//-----------------------------------------------------------------------------
+// Legic Simulator
+//-----------------------------------------------------------------------------
+
 static void setup_timer(void)
 {
        /* Set up Timer 1 to use for measuring time between pulses. Since we're bit-banging
@@ -62,22 +519,6 @@ static void setup_timer(void)
     prng_timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
 }
 
-/* At TIMER_CLOCK3 (MCK/32) */
-#define        RWD_TIME_1 150     /* RWD_TIME_PAUSE off, 80us on = 100us */
-#define RWD_TIME_0 90      /* RWD_TIME_PAUSE off, 40us on = 60us */
-#define RWD_TIME_PAUSE 30  /* 20us */
-#define RWD_TIME_FUZZ 20   /* rather generous 13us, since the peak detector + hysteresis fuzz quite a bit */
-#define TAG_TIME_BIT 150   /* 100us for every bit */
-#define TAG_TIME_WAIT 490  /* time from RWD frame end to tag frame start, experimentally determined */
-
-#define SIM_DIVISOR  586   /* prng_time/SIM_DIVISOR count prng needs to be forwared */
-#define SIM_SHIFT    900   /* prng_time+SIM_SHIFT shift of delayed start */
-
-#define SESSION_IV 0x55
-#define OFFSET_LOG 1024
-
-#define FUZZ_EQUAL(value, target, fuzz) ((value) > ((target)-(fuzz)) && (value) < ((target)+(fuzz)))
-
 /* Generate Keystream */
 static uint32_t get_key_stream(int skip, int count)
 {
@@ -138,11 +579,11 @@ static void frame_send_tag(uint16_t response, int bits, int crypt)
    }
 
    /* Wait for the frame start */
-   while(timer->TC_CV < (TAG_TIME_WAIT - 30)) ;
+   while(timer->TC_CV < (TAG_FRAME_WAIT - 30)) ;
        
    int i;
    for(i=0; i<bits; i++) {
-      int nextbit = timer->TC_CV + TAG_TIME_BIT;
+      int nextbit = timer->TC_CV + TAG_BIT_PERIOD;
       int bit = response & 1;
       response = response >> 1;
       if(bit) {
@@ -155,126 +596,6 @@ static void frame_send_tag(uint16_t response, int bits, int crypt)
    AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
 }
 
-/* Send a frame in reader mode, the FPGA must have been set up by
- * LegicRfReader
- */
-static void frame_send_rwd(uint32_t data, int bits)
-{
-       /* Start clock */
-       timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
-       while(timer->TC_CV > 1) ; /* Wait till the clock has reset */
-
-       int i;
-       for(i=0; i<bits; i++) {
-               int starttime = timer->TC_CV;
-               int pause_end = starttime + RWD_TIME_PAUSE, bit_end;
-               int bit = data & 1;
-               data = data >> 1;
-
-               if(bit ^ legic_prng_get_bit()) {
-                       bit_end = starttime + RWD_TIME_1;
-               } else {
-                       bit_end = starttime + RWD_TIME_0;
-               }
-
-               /* RWD_TIME_PAUSE time off, then some time on, so that the complete bit time is
-                * RWD_TIME_x, where x is the bit to be transmitted */
-               AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
-               while(timer->TC_CV < pause_end) ;
-               AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT;
-               legic_prng_forward(1); /* bit duration is longest. use this time to forward the lfsr */
-
-               while(timer->TC_CV < bit_end) ;
-       }
-
-       {
-               /* One final pause to mark the end of the frame */
-               int pause_end = timer->TC_CV + RWD_TIME_PAUSE;
-               AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
-               while(timer->TC_CV < pause_end) ;
-               AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT;
-       }
-
-       /* Reset the timer, to measure time until the start of the tag frame */
-       timer->TC_CCR = AT91C_TC_SWTRG;
-       while(timer->TC_CV > 1) ; /* Wait till the clock has reset */
-}
-
-/* Receive a frame from the card in reader emulation mode, the FPGA and
- * timer must have been set up by LegicRfReader and frame_send_rwd.
- *
- * The LEGIC RF protocol from card to reader does not include explicit
- * frame start/stop information or length information. The reader must
- * know beforehand how many bits it wants to receive. (Notably: a card
- * sending a stream of 0-bits is indistinguishable from no card present.)
- *
- * Receive methodology: There is a fancy correlator in hi_read_rx_xcorr, but
- * I'm not smart enough to use it. Instead I have patched hi_read_tx to output
- * the ADC signal with hysteresis on SSP_DIN. Bit-bang that signal and look
- * for edges. Count the edges in each bit interval. If they are approximately
- * 0 this was a 0-bit, if they are approximately equal to the number of edges
- * expected for a 212kHz subcarrier, this was a 1-bit. For timing we use the
- * timer that's still running from frame_send_rwd in order to get a synchronization
- * with the frame that we just sent.
- *
- * FIXME: Because we're relying on the hysteresis to just do the right thing
- * the range is severely reduced (and you'll probably also need a good antenna).
- * So this should be fixed some time in the future for a proper receiver.
- */
-static void frame_receive_rwd(struct legic_frame * const f, int bits, int crypt)
-{
-       uint32_t the_bit = 1;  /* Use a bitmask to save on shifts */
-       uint32_t data=0;
-       int i, old_level=0, edges=0;
-       int next_bit_at = TAG_TIME_WAIT;
-       
-       if(bits > 32) {
-               bits = 32;
-    }
-
-       AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN;
-       AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN;
-
-       /* we have some time now, precompute the cipher
-     * since we cannot compute it on the fly while reading */
-       legic_prng_forward(2);
-
-       if(crypt)
-       {
-               for(i=0; i<bits; i++) {
-                       data |= legic_prng_get_bit() << i;
-                       legic_prng_forward(1);
-               }
-       }
-
-       while(timer->TC_CV < next_bit_at) ;
-
-       next_bit_at += TAG_TIME_BIT;
-
-       for(i=0; i<bits; i++) {
-               edges = 0;
-               while(timer->TC_CV < next_bit_at) {
-                       int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN);
-                       if(level != old_level)
-                               edges++;
-                       old_level = level;
-               }
-               next_bit_at += TAG_TIME_BIT;
-               
-               if(edges > 20 && edges < 60) { /* expected are 42 edges */
-                       data ^= the_bit;
-               }
-               the_bit <<= 1;
-       }
-
-       f->data = data;
-       f->bits = bits;
-
-       /* Reset the timer, to synchronize the next frame */
-       timer->TC_CCR = AT91C_TC_SWTRG;
-       while(timer->TC_CV > 1) ; /* Wait till the clock has reset */
-}
-
 static void frame_append_bit(struct legic_frame * const f, int bit)
 {
    if(f->bits >= 31) {
@@ -290,250 +611,6 @@ static void frame_clean(struct legic_frame * const f)
        f->bits = 0;
 }
 
-static uint32_t perform_setup_phase_rwd(int iv)
-{
-
-       /* Switch on carrier and let the tag charge for 1ms */
-       AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT;
-       SpinDelay(1);
-
-       legic_prng_init(0); /* no keystream yet */
-       frame_send_rwd(iv, 7);
-       legic_prng_init(iv);
-
-       frame_clean(&current_frame);
-       frame_receive_rwd(&current_frame, 6, 1);
-       legic_prng_forward(1); /* we wait anyways */
-       while(timer->TC_CV < 387) ; /* ~ 258us */
-       frame_send_rwd(0x19, 6);
-
-       return current_frame.data;
-}
-
-static void LegicCommonInit(void) {
-       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-       SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-       FpgaSetupSsc();
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX);
-
-       /* Bitbang the transmitter */
-       AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
-       AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
-       AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
-
-       setup_timer();
-
-       crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0);
-}
-
-static void switch_off_tag_rwd(void)
-{
-       /* Switch off carrier, make sure tag is reset */
-       AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
-       SpinDelay(10);
-
-       WDT_HIT();
-}
-/* calculate crc for a legic command */
-static int LegicCRC(int byte_index, int value, int cmd_sz) {
-       crc_clear(&legic_crc);
-       crc_update(&legic_crc, 1, 1); /* CMD_READ */
-       crc_update(&legic_crc, byte_index, cmd_sz-1);
-       crc_update(&legic_crc, value, 8);
-       return crc_finish(&legic_crc);
-}
-
-int legic_read_byte(int byte_index, int cmd_sz) {
-       int byte;
-
-       legic_prng_forward(4); /* we wait anyways */
-       while(timer->TC_CV < 387) ; /* ~ 258us + 100us*delay */
-
-       frame_send_rwd(1 | (byte_index << 1), cmd_sz);
-       frame_clean(&current_frame);
-
-       frame_receive_rwd(&current_frame, 12, 1);
-
-       byte = current_frame.data & 0xff;
-       if( LegicCRC(byte_index, byte, cmd_sz) != (current_frame.data >> 8) ) {
-               Dbprintf("!!! crc mismatch: expected %x but got %x !!!", 
-           LegicCRC(byte_index, current_frame.data & 0xff, cmd_sz), current_frame.data >> 8);
-               return -1;
-       }
-
-       return byte;
-}
-
-/* legic_write_byte() is not included, however it's trivial to implement
- * and here are some hints on what remains to be done:
- *
- *  * assemble a write_cmd_frame with crc and send it
- *  * wait until the tag sends back an ACK ('1' bit unencrypted)
- *  * forward the prng based on the timing
- */
-int legic_write_byte(int byte, int addr, int addr_sz) {
-    //do not write UID, CRC, DCF
-    if(addr <= 0x06) { 
-               return 0;
-       }
-
-       //== send write command ==============================
-       crc_clear(&legic_crc);
-       crc_update(&legic_crc, 0, 1); /* CMD_WRITE */
-       crc_update(&legic_crc, addr, addr_sz);
-       crc_update(&legic_crc, byte, 8);
-
-       uint32_t crc = crc_finish(&legic_crc);
-       uint32_t cmd = ((crc     <<(addr_sz+1+8)) //CRC
-                   |(byte    <<(addr_sz+1))   //Data
-                   |(addr    <<1)             //Address
-                   |(0x00    <<0));           //CMD = W
-    uint32_t cmd_sz = addr_sz+1+8+4;          //crc+data+cmd
-
-    legic_prng_forward(2); /* we wait anyways */
-    while(timer->TC_CV < 387) {}; /* ~ 258us */
-       frame_send_rwd(cmd, cmd_sz);
-
-       //== wait for ack ====================================
-    int t, old_level=0, edges=0;
-    int next_bit_at =0;
-       while(timer->TC_CV < 387) ; /* ~ 258us */
-    for(t=0; t<80; t++) {
-        edges = 0;
-               next_bit_at += TAG_TIME_BIT;
-        while(timer->TC_CV < next_bit_at) {
-            int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN);
-            if(level != old_level) {
-                edges++;
-                       }
-            old_level = level;
-        }
-        if(edges > 20 && edges < 60) { /* expected are 42 edges */
-                       int t = timer->TC_CV;
-                       int c = t/TAG_TIME_BIT;
-                       timer->TC_CCR = AT91C_TC_SWTRG;
-                       while(timer->TC_CV > 1) ; /* Wait till the clock has reset */
-                       legic_prng_forward(c);
-               return 0;
-        }
-    }
-    timer->TC_CCR = AT91C_TC_SWTRG;
-    while(timer->TC_CV > 1) {}; /* Wait till the clock has reset */
-       return -1;
-}
-
-int LegicRfReader(int offset, int bytes) {
-       int byte_index=0, cmd_sz=0, card_sz=0;
-
-       LegicCommonInit();
-
-       uint8_t *BigBuf = BigBuf_get_addr();
-       memset(BigBuf, 0, 1024);
-
-       DbpString("setting up legic card");
-       uint32_t tag_type = perform_setup_phase_rwd(SESSION_IV);
-       switch_off_tag_rwd(); //we lose to mutch time with dprintf
-       switch(tag_type) {
-               case 0x1d:
-                       DbpString("MIM 256 card found, reading card ...");
-            cmd_sz = 9;
-                       card_sz = 256;
-                       break;
-               case 0x3d:
-                       DbpString("MIM 1024 card found, reading card ...");
-            cmd_sz = 11;
-                       card_sz = 1024;
-                       break;
-               default:
-                       Dbprintf("Unknown card format: %x",tag_type);
-                       return -1;
-       }
-       if(bytes == -1) {
-               bytes = card_sz;
-       }
-       if(bytes+offset >= card_sz) {
-               bytes = card_sz-offset;
-       }
-
-       perform_setup_phase_rwd(SESSION_IV);
-
-       LED_B_ON();
-       while(byte_index < bytes) {
-               int r = legic_read_byte(byte_index+offset, cmd_sz);
-               if(r == -1 ||BUTTON_PRESS()) {
-               DbpString("operation aborted");
-                       switch_off_tag_rwd();
-               LED_B_OFF();
-                       LED_C_OFF();
-               return -1;
-               }
-               BigBuf[byte_index] = r;
-        WDT_HIT();
-               byte_index++;
-               if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF();
-       }
-       LED_B_OFF();
-    LED_C_OFF();
-       switch_off_tag_rwd();
-       Dbprintf("Card read, use 'hf legic decode' or");
-    Dbprintf("'data hexsamples %d' to view results", (bytes+7) & ~7);
-    return 0;
-}
-
-void LegicRfWriter(int bytes, int offset) {
-       int byte_index=0, addr_sz=0;
-       uint8_t *BigBuf = BigBuf_get_addr();
-
-       LegicCommonInit();
-       
-       DbpString("setting up legic card");
-       uint32_t tag_type = perform_setup_phase_rwd(SESSION_IV);
-       switch_off_tag_rwd();
-       switch(tag_type) {
-               case 0x1d:
-                       if(offset+bytes > 0x100) {
-                               Dbprintf("Error: can not write to 0x%03.3x on MIM 256", offset+bytes);
-                               return;
-                       }
-                       addr_sz = 8;
-                       Dbprintf("MIM 256 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset+bytes);
-                       break;
-               case 0x3d:
-                       if(offset+bytes > 0x400) {
-                       Dbprintf("Error: can not write to 0x%03.3x on MIM 1024", offset+bytes);
-                       return;
-               }
-                       addr_sz = 10;
-                       Dbprintf("MIM 1024 card found, writing 0x%03.3x - 0x%03.3x ...", offset, offset+bytes);
-                       break;
-               default:
-                       Dbprintf("No or unknown card found, aborting");
-            return;
-       }
-
-    LED_B_ON();
-       perform_setup_phase_rwd(SESSION_IV);
-    legic_prng_forward(2);
-       while(byte_index < bytes) {
-               int r = legic_write_byte(BigBuf[byte_index+offset], byte_index+offset, addr_sz);
-               if((r != 0) || BUTTON_PRESS()) {
-                       Dbprintf("operation aborted @ 0x%03.3x", byte_index);
-                       switch_off_tag_rwd();
-                       LED_B_OFF();
-                       LED_C_OFF();
-                       return;
-               }
-        WDT_HIT();
-               byte_index++;
-        if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF();
-       }
-    LED_B_OFF();
-    LED_C_OFF();
-    DbpString("write successful");
-}
-
-int timestamp;
-
 /* Handle (whether to respond) a frame in tag mode */
 static void frame_handle_tag(struct legic_frame const * const f)
 {
@@ -588,7 +665,7 @@ static void frame_handle_tag(struct legic_frame const * const f)
          int key   = get_key_stream(-1, 11); //legic_phase_drift, 11);
          int addr  = f->data ^ key; addr = addr >> 1;
          int data = BigBuf[addr];
-         int hash = LegicCRC(addr, data, 11) << 8;
+         int hash = calc_crc4(addr, data, 11) << 8;
          BigBuf[OFFSET_LOG+legic_read_count] = (uint8_t)addr;
          legic_read_count++;
 
index 57ab7e6d3a486e933e7a776b9f8878ed2976e643..464598566b4b1546b0e89de8cde033c338b4ea80 100644 (file)
@@ -12,7 +12,7 @@
 #define __LEGICRF_H
 
 extern void LegicRfSimulate(int phase, int frame, int reqresp);
-extern int  LegicRfReader(int bytes, int offset);
+extern void LegicRfReader(int bytes, int offset);
 extern void LegicRfWriter(int bytes, int offset);
 
 #endif /* __LEGICRF_H */
index 2d256b72e46a53e8650c144228a005d798e48db4..c6ca1cf1f1bb040344e9ff5d383a705ba98d07c4 100644 (file)
@@ -26,6 +26,11 @@ CXXFLAGS = -I../include -Wall -O3
 APP_CFLAGS =
 include ../common/Makefile_Enabled_Options.common
 CFLAGS += $(APP_CFLAGS)
+ifneq (,$(findstring WITH_SMARTCARD,$(APP_CFLAGS)))
+       SRC_SMARTCARD = cmdsmartcard.c
+else
+       SRC_SMARTCARD = 
+endif
 
 LUAPLATFORM = generic
 platform = $(shell uname)
@@ -93,7 +98,8 @@ CORESRCS =    uart_posix.c \
                        ui.c \
                        comms.c
 
-CMDSRCS =      crapto1/crapto1.c\
+CMDSRCS =      $(SRC_SMARTCARD) \
+                       crapto1/crapto1.c\
                        crapto1/crypto1.c\
                        polarssl/des.c \
                        polarssl/aes.c\
@@ -310,9 +316,7 @@ DEPENDENCY_FILES = $(patsubst %.c, $(OBJDIR)/%.d, $(CORESRCS) $(CMDSRCS) $(ZLIBS
        $(patsubst %.cpp, $(OBJDIR)/%.d, $(QTGUISRCS)) \
        $(OBJDIR)/proxmark3.d $(OBJDIR)/flash.d $(OBJDIR)/flasher.d $(OBJDIR)/fpga_compress.d
 
-
 $(DEPENDENCY_FILES): ;
 .PRECIOUS: $(DEPENDENCY_FILES)
 
 -include $(DEPENDENCY_FILES)
-
index 93906a7d472bbf114f92a19e5b5bf962fe4323a4..b973354d728acba1848922ba7fc9f0201f1fa9c7 100644 (file)
@@ -353,6 +353,12 @@ uint16_t printTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace, ui
 
 int CmdHFList(const char *Cmd)
 {
+       #ifdef WITH_SMARTCARD
+               PrintAndLog("TEST_WITH_SMARTCARD");
+       #endif
+       #ifdef WITH_TEST
+               PrintAndLog("TEST_WITH_TEST");
+       #endif
        bool showWaitCycles = false;
        bool markCRCBytes = false;
        bool loadFromFile = false;
index 01d4c9a7f7e2d04d58f26ea38f6a1ff191821970..f503021a174071c760c2df5d9f95c3f75f339115 100644 (file)
@@ -26,7 +26,9 @@
 #include "util.h"
 #include "util_posix.h"
 #include "cmdscript.h"
-
+#ifdef WITH_SMARTCARD 
+  #include "cmdsmartcard.h"
+#endif
 
 static int CmdHelp(const char *Cmd);
 static int CmdQuit(const char *Cmd);
@@ -39,6 +41,9 @@ static command_t CommandTable[] =
   {"hf",    CmdHF,    1, "{ High Frequency commands... }"},
   {"hw",    CmdHW,    1, "{ Hardware commands... }"},
   {"lf",    CmdLF,    1, "{ Low Frequency commands... }"},
+#ifdef WITH_SMARTCARD
+  {"sc",    CmdSmartcard,1,"{ Smartcard commands... }"},
+#endif
   {"script",CmdScript,1, "{ Scripting commands }"},
   {"quit",  CmdQuit,  1, "Exit program"},
   {"exit",  CmdQuit,  1, "Exit program"},
diff --git a/client/cmdsmartcard.c b/client/cmdsmartcard.c
new file mode 100644 (file)
index 0000000..b2a5705
--- /dev/null
@@ -0,0 +1,707 @@
+//-----------------------------------------------------------------------------
+// Copyright (C) 2018 iceman
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Proxmark3 RDV40 Smartcard module commands
+//-----------------------------------------------------------------------------
+#include "cmdsmartcard.h"
+#include "smartcard.h"
+#include "comms.h"
+#include "protocols.h"
+
+
+static int CmdHelp(const char *Cmd);
+
+int usage_sm_raw(void) {
+       PrintAndLog("Usage: sc raw [h|r|c] d <0A 0B 0C ... hex>");
+       PrintAndLog("       h          :  this help");
+       PrintAndLog("       r          :  do not read response");
+       PrintAndLog("       a          :  active signal field ON without select");
+       PrintAndLog("       s          :  active signal field ON with select");
+       PrintAndLog("       t          :  executes TLV decoder if it is possible");
+       PrintAndLog("       d <bytes>  :  bytes to send");
+       PrintAndLog("");
+       PrintAndLog("Examples:");
+       PrintAndLog("        sc raw d 11223344");       
+       return 0;
+}
+int usage_sm_reader(void) {
+       PrintAndLog("Usage: sc reader [h|s]");
+       PrintAndLog("       h          :  this help");
+       PrintAndLog("       s          :  silent (no messages)");
+       PrintAndLog("");
+       PrintAndLog("Examples:");
+       PrintAndLog("        sc reader");       
+       return 0;
+}
+int usage_sm_info(void) {
+       PrintAndLog("Usage: sc info [h|s]");
+       PrintAndLog("       h          :  this help");
+       PrintAndLog("       s          :  silent (no messages)");
+       PrintAndLog("");
+       PrintAndLog("Examples:");
+       PrintAndLog("        sc info");
+       return 0;
+}
+int usage_sm_upgrade(void) {
+       PrintAndLog("Upgrade firmware");
+       PrintAndLog("Usage: sc upgrade f <file name>");
+       PrintAndLog("       h               :  this help");
+       PrintAndLog("       f <filename>    :  firmware file name");
+       PrintAndLog("");
+       PrintAndLog("Examples:");
+       PrintAndLog("        sc upgrade f myfile");
+  PrintAndLog("");
+       PrintAndLog("WARNING - Dangerous command, do wrong and you will brick the smart card socket");
+       return 0;
+}
+int usage_sm_setclock(void) {
+       PrintAndLog("Usage: sc setclock [h] c <clockspeed>");
+       PrintAndLog("       h          :  this help");
+       PrintAndLog("       c <>       :  clockspeed (0 = 16mhz, 1=8mhz, 2=4mhz) ");
+       PrintAndLog("");
+       PrintAndLog("Examples:");
+       PrintAndLog("        sc setclock c 2");
+       return 0;
+}
+
+int CmdSmartRaw(const char *Cmd) {
+
+       int hexlen = 0;
+       bool active = false;
+       bool active_select = false;
+       uint8_t cmdp = 0;
+       bool errors = false, reply = true, decodeTLV = false, breakloop = false;
+       uint8_t data[USB_CMD_DATA_SIZE] = {0x00};
+
+       while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+               switch (tolower(param_getchar(Cmd, cmdp))) {
+               case 'h': return usage_sm_raw();
+               case 'r':
+                       reply = false;
+                       cmdp++;
+                       break;
+               case 'a':
+                       active = true;
+                       cmdp++;
+                       break;
+               case 's':
+                       active_select = true;
+                       cmdp++;
+                       break;
+               case 't':
+                       decodeTLV = true;
+                       cmdp++;
+                       break;
+               case 'd': {
+                       switch (param_gethex_to_eol(Cmd, cmdp+1, data, sizeof(data), &hexlen)) {
+                       case 1:
+                               PrintAndLog("Invalid HEX value.");
+                               return 1;
+                       case 2:
+                               PrintAndLog("Too many bytes.  Max %d bytes", sizeof(data));
+                               return 1;
+                       case 3:
+                               PrintAndLog("Hex must have an even number of digits.");
+                               return 1;
+                       }
+                       cmdp++;
+                       breakloop = true;
+                       break;
+               }
+               default:
+                       PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+                       errors = true;
+                       break;
+               }
+
+               if ( breakloop )
+                       break;
+       }
+
+       //Validations
+       if (errors || cmdp == 0 ) return usage_sm_raw();
+
+       // arg0 = RFU flags
+       // arg1 = length
+       UsbCommand c = {CMD_SMART_RAW, {0, hexlen, 0}};
+
+       if (active || active_select) {
+               c.arg[0] |= SC_CONNECT;
+               if (active)
+                       c.arg[0] |= SC_NO_SELECT;
+               }
+
+       if (hexlen > 0) {
+               c.arg[0] |= SC_RAW;
+       }
+
+       memcpy(c.d.asBytes, data, hexlen );
+       clearCommandBuffer();
+       SendCommand(&c);
+
+       // reading response from smart card
+       if ( reply ) {
+               UsbCommand resp;
+               if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)) {
+                       PrintAndLog("smart card response failed");
+                       return 1;
+               }
+               uint32_t datalen = resp.arg[0];
+
+               if ( !datalen ) {
+                       PrintAndLog("smart card response failed");
+                       return 1;
+               }
+
+               PrintAndLog("received %i bytes", datalen);
+
+               if (!datalen)
+                       return 1;
+
+               uint8_t *data = resp.d.asBytes;
+
+               // TLV decoder
+               if (decodeTLV ) {
+
+                       if (datalen >= 2) {
+                               PrintAndLog("%02x %02x | %s", data[datalen - 2], data[datalen - 1], GetAPDUCodeDescription(data[datalen - 2], data[datalen - 1])); 
+                       }
+                       if (datalen > 4) {
+                               TLVPrintFromBuffer(data, datalen - 2);
+                       }
+               } else {
+                       PrintAndLog("%s", sprint_hex(data,  datalen)); 
+               }
+       }
+       return 0;
+}
+
+int CmdSmartUpgrade(const char *Cmd) {
+
+       PrintAndLog("WARNING - Smartcard socket firmware upgrade.");
+       PrintAndLog("Dangerous command, do wrong and you will brick the smart card socket");
+
+       FILE *f;
+       char filename[FILE_PATH_SIZE] = {0};
+       uint8_t cmdp = 0;
+       bool errors = false;
+
+       while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+               switch (tolower(param_getchar(Cmd, cmdp))) {
+               case 'f':
+                       //File handling and reading
+                       if ( param_getstr(Cmd, cmdp+1, filename, FILE_PATH_SIZE) >= FILE_PATH_SIZE ) {
+                               PrintAndLog("Filename too long");
+                               errors = true;
+                               break;
+                       }
+                       cmdp += 2;
+                       break;
+               case 'h':
+                       return usage_sm_upgrade();
+               default:
+                       PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+                       errors = true;
+                       break;
+               }
+       }
+
+       //Validations
+       if (errors || cmdp == 0 ) return usage_sm_upgrade();
+
+       // load file
+       f = fopen(filename, "rb");
+       if ( !f ) {
+               PrintAndLog("File: %s: not found or locked.", filename);
+               return 1;
+       }
+
+       // get filesize in order to malloc memory
+       fseek(f, 0, SEEK_END);
+       long fsize = ftell(f);
+       fseek(f, 0, SEEK_SET);
+
+       if (fsize < 0) {
+               PrintAndLog("error, when getting filesize");
+               fclose(f);
+               return 1;
+       }
+               
+       uint8_t *dump = calloc(fsize, sizeof(uint8_t));
+       if (!dump) {
+               PrintAndLog("error, cannot allocate memory ");
+               fclose(f);
+               return 1;
+       }
+
+       size_t bytes_read = fread(dump, 1, fsize, f);
+       if (f)
+               fclose(f);
+
+       PrintAndLog("Smartcard socket firmware uploading to PM3");
+       //Send to device
+       uint32_t index = 0;
+       uint32_t bytes_sent = 0;
+       uint32_t bytes_remaining = bytes_read;
+
+       while (bytes_remaining > 0){
+               uint32_t bytes_in_packet = MIN(USB_CMD_DATA_SIZE, bytes_remaining);
+               UsbCommand c = {CMD_SMART_UPLOAD, {index + bytes_sent, bytes_in_packet, 0}};
+
+               // Fill usb bytes with 0xFF
+               memset(c.d.asBytes, 0xFF, USB_CMD_DATA_SIZE);
+               memcpy(c.d.asBytes, dump + bytes_sent, bytes_in_packet);
+               clearCommandBuffer();
+               SendCommand(&c);
+               if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2000) ) {
+                       PrintAndLog("timeout while waiting for reply.");
+                       free(dump);
+                       return 1;
+               }
+
+               bytes_remaining -= bytes_in_packet;
+               bytes_sent += bytes_in_packet;
+               printf("."); fflush(stdout);
+       }
+       free(dump);
+       printf("\n");
+       PrintAndLog("Smartcard socket firmware updating,  don\'t turn off your PM3!");
+
+       // trigger the firmware upgrade
+       UsbCommand c = {CMD_SMART_UPGRADE, {bytes_read, 0, 0}};
+       clearCommandBuffer();
+       SendCommand(&c);
+       UsbCommand resp;
+       if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+               PrintAndLog("timeout while waiting for reply.");
+               return 1;
+       }
+       if ( (resp.arg[0] && 0xFF ) )
+               PrintAndLog("Smartcard socket firmware upgraded successful");
+       else
+               PrintAndLog("Smartcard socket firmware updating failed");
+       return 0;
+}
+
+int CmdSmartInfo(const char *Cmd){
+       uint8_t cmdp = 0;
+       bool errors = false, silent = false;
+
+       while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+               switch (tolower(param_getchar(Cmd, cmdp))) {
+               case 'h': return usage_sm_info();
+               case 's': 
+                       silent = true;
+                       break;
+               default:
+                       PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+                       errors = true;
+                       break;
+               }
+               cmdp++;
+       }
+
+       //Validations
+       if (errors ) return usage_sm_info();
+
+       UsbCommand c = {CMD_SMART_ATR, {0, 0, 0}};
+       clearCommandBuffer();
+       SendCommand(&c);
+       UsbCommand resp;
+       if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+               if (!silent) PrintAndLog("smart card select failed");
+               return 1;
+       }
+
+       uint8_t isok = resp.arg[0] & 0xFF;
+       if (!isok) {
+               if (!silent) PrintAndLog("smart card select failed");
+               return 1;
+       }
+
+       smart_card_atr_t card;
+       memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t));
+
+       // print header
+       PrintAndLog("\n--- Smartcard Information ---------");
+       PrintAndLog("-------------------------------------------------------------");
+       PrintAndLog("ISO76183 ATR : %s", sprint_hex(card.atr, card.atr_len));
+       PrintAndLog("look up ATR");
+       PrintAndLog("http://smartcard-atr.appspot.com/parse?ATR=%s", sprint_hex_inrow(card.atr, card.atr_len) );
+       return 0;
+}
+
+int CmdSmartReader(const char *Cmd){
+       uint8_t cmdp = 0;
+       bool errors = false, silent = false;
+
+       while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+               switch (tolower(param_getchar(Cmd, cmdp))) {
+               case 'h': return usage_sm_reader();
+               case 's': 
+                       silent = true;
+                       break;
+               default:
+                       PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+                       errors = true;
+                       break;
+               }
+               cmdp++;
+       }
+
+       //Validations
+       if (errors ) return usage_sm_reader();
+
+       UsbCommand c = {CMD_SMART_ATR, {0, 0, 0}};
+       clearCommandBuffer();
+       SendCommand(&c);
+       UsbCommand resp;
+       if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+               if (!silent) PrintAndLog("smart card select failed");
+               return 1;
+       }
+
+       uint8_t isok = resp.arg[0] & 0xFF;
+       if (!isok) {
+               if (!silent) PrintAndLog("smart card select failed");
+               return 1;
+       }
+       smart_card_atr_t card;
+       memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t));
+       PrintAndLog("ISO7816-3 ATR : %s", sprint_hex(card.atr, card.atr_len));  
+       return 0;
+}
+
+int CmdSmartSetClock(const char *Cmd){
+       uint8_t cmdp = 0;
+       bool errors = false;
+       uint8_t clock = 0;
+       while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+               switch (tolower(param_getchar(Cmd, cmdp))) {
+               case 'h': return usage_sm_setclock();
+               case 'c': 
+                       clock = param_get8ex(Cmd, cmdp+1, 2, 10);
+                       if ( clock > 2)
+                               errors = true;
+                       
+                       cmdp += 2;
+                       break;
+               default:
+                       PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+                       errors = true;
+                       break;
+               }
+       }
+
+       //Validations
+       if (errors || cmdp == 0) return usage_sm_setclock();
+
+       UsbCommand c = {CMD_SMART_SETCLOCK, {clock, 0, 0}};
+       clearCommandBuffer();
+       SendCommand(&c);
+       UsbCommand resp;
+       if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+               PrintAndLog("smart card select failed");
+               return 1;
+       }
+
+       uint8_t isok = resp.arg[0] & 0xFF;
+       if (!isok) {
+               PrintAndLog("smart card set clock failed");
+               return 1;
+       }
+
+       switch (clock) {
+               case 0:
+                       PrintAndLog("Clock changed to 16mhz giving 10800 baudrate");
+                       break;
+               case 1:
+                       PrintAndLog("Clock changed to 8mhz giving 21600 baudrate");
+                       break;
+               case 2:
+                       PrintAndLog("Clock changed to 4mhz giving 86400 baudrate");
+                       break;
+               default:
+                       break;
+       }
+       return 0;
+}
+
+
+// iso 7816-3 
+void annotateIso7816(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize){
+       // S-block
+       if ( (cmd[0] & 0xC0) && (cmdsize == 3) ) {
+               switch ( (cmd[0] & 0x3f)  ) {
+                       case 0x00 : snprintf(exp, size, "S-block RESYNCH req"); break;
+                       case 0x20 : snprintf(exp, size, "S-block RESYNCH resp"); break;
+                       case 0x01 : snprintf(exp, size, "S-block IFS req"); break;
+                       case 0x21 : snprintf(exp, size, "S-block IFS resp"); break;
+                       case 0x02 : snprintf(exp, size, "S-block ABORT req"); break;
+                       case 0x22 : snprintf(exp, size, "S-block ABORT resp"); break;
+                       case 0x03 : snprintf(exp, size, "S-block WTX reqt"); break;
+                       case 0x23 : snprintf(exp, size, "S-block WTX resp"); break;
+                       default   : snprintf(exp, size, "S-block"); break;
+               }
+       }
+       // R-block (ack)
+       else if ( ((cmd[0] & 0xD0) == 0x80) && ( cmdsize > 2) ) {
+               if ( (cmd[0] & 0x10) == 0 ) 
+                       snprintf(exp, size, "R-block ACK");
+               else
+                       snprintf(exp, size, "R-block NACK");
+       }
+       // I-block
+       else {
+
+               int pos = (cmd[0] == 2 ||  cmd[0] == 3) ? 2 : 3;
+               switch ( cmd[pos] ) {
+                       case ISO7816_READ_BINARY             :snprintf(exp, size, "READ BIN");break;
+                       case ISO7816_WRITE_BINARY            :snprintf(exp, size, "WRITE BIN");break;
+                       case ISO7816_UPDATE_BINARY           :snprintf(exp, size, "UPDATE BIN");break;
+                       case ISO7816_ERASE_BINARY            :snprintf(exp, size, "ERASE BIN");break;
+                       case ISO7816_READ_RECORDS            :snprintf(exp, size, "READ RECORDS");break;
+                       case ISO7816_WRITE_RECORDS           :snprintf(exp, size, "WRITE RECORDS");break;
+                       case ISO7816_APPEND_RECORD           :snprintf(exp, size, "APPEND RECORD");break;
+                       case ISO7816_UPDATE_RECORD           :snprintf(exp, size, "UPDATE RECORD");break;
+                       case ISO7816_GET_DATA                :snprintf(exp, size, "GET DATA");break;
+                       case ISO7816_PUT_DATA                :snprintf(exp, size, "PUT DATA");break;
+                       case ISO7816_SELECT_FILE             :snprintf(exp, size, "SELECT FILE");break;
+                       case ISO7816_VERIFY                  :snprintf(exp, size, "VERIFY");break;
+                       case ISO7816_INTERNAL_AUTHENTICATION :snprintf(exp, size, "INTERNAL AUTH");break;
+                       case ISO7816_EXTERNAL_AUTHENTICATION :snprintf(exp, size, "EXTERNAL AUTH");break;
+                       case ISO7816_GET_CHALLENGE           :snprintf(exp, size, "GET CHALLENGE");break;
+                       case ISO7816_MANAGE_CHANNEL          :snprintf(exp, size, "MANAGE CHANNEL");break;
+                       default                              :snprintf(exp, size, "?"); break;
+               }
+       }
+}
+
+
+uint16_t printScTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace) {
+               // sanity check
+       if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) > traceLen) return traceLen;
+
+       bool isResponse;
+       uint16_t data_len, parity_len;
+       uint32_t duration, timestamp, first_timestamp, EndOfTransmissionTimestamp;
+       char explanation[30] = {0};
+
+       first_timestamp = *((uint32_t *)(trace));
+       timestamp = *((uint32_t *)(trace + tracepos));
+       tracepos += 4;
+
+       duration = *((uint16_t *)(trace + tracepos));
+       tracepos += 2;
+
+       data_len = *((uint16_t *)(trace + tracepos));
+       tracepos += 2;
+
+       if (data_len & 0x8000) {
+               data_len &= 0x7fff;
+               isResponse = true;
+       } else {
+               isResponse = false;
+       }
+
+       parity_len = (data_len-1)/8 + 1;
+       if (tracepos + data_len + parity_len > traceLen) {
+               return traceLen;
+       }
+       uint8_t *frame = trace + tracepos;
+       tracepos += data_len;
+       //uint8_t *parityBytes = trace + tracepos;
+       tracepos += parity_len;
+
+       //--- Draw the data column
+       char line[18][110];
+
+       if (data_len == 0 ) {
+               sprintf(line[0],"<empty trace - possible error>");
+               return tracepos;
+       }
+
+       for (int j = 0; j < data_len && j/18 < 18; j++) {
+               snprintf(line[j/18]+(( j % 18) * 4),110, "%02x  ", frame[j]);
+       }
+
+       EndOfTransmissionTimestamp = timestamp + duration;
+
+       annotateIso7816(explanation,sizeof(explanation),frame,data_len);
+
+       int num_lines = MIN((data_len - 1)/18 + 1, 18);
+       for (int j = 0; j < num_lines ; j++) {
+               if (j == 0) {
+                       PrintAndLog(" %10u | %10u | %s |%-72s | %s| %s",
+                               (timestamp - first_timestamp),
+                               (EndOfTransmissionTimestamp - first_timestamp),
+                               (isResponse ? "Tag" : "Rdr"),
+                               line[j],
+                               "    ",
+                               (j == num_lines-1) ? explanation : "");
+               } else {
+                       PrintAndLog("            |            |     |%-72s | %s| %s",
+                               line[j],
+                               "    ",
+                               (j == num_lines-1) ? explanation : "");
+               }
+       }
+
+       // if is last record
+       if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) >= traceLen) return traceLen;
+
+       return tracepos;
+}
+
+int ScTraceList(const char *Cmd) {
+       bool loadFromFile = false;
+       bool saveToFile = false;
+       char type[5] = {0};
+       char filename[FILE_PATH_SIZE] = {0};
+
+       // parse command line
+       param_getstr(Cmd, 0, type, sizeof(type));
+       param_getstr(Cmd, 1, filename, sizeof(filename));
+
+       bool errors = false;
+       if(type[0] == 'h') {
+               errors = true;
+       }
+
+       if(!errors) {
+               if (strcmp(type, "s") == 0) {
+                       saveToFile = true;
+               } else if (strcmp(type,"l") == 0) {
+                       loadFromFile = true;
+               }
+       }
+
+       if ((loadFromFile || saveToFile) && strlen(filename) == 0) {
+               errors = true;
+       }
+
+       if (loadFromFile && saveToFile) {
+               errors = true;
+       }
+
+       if (errors) {
+               PrintAndLog("List or save protocol data.");
+               PrintAndLog("Usage:  sc list [l <filename>]");
+               PrintAndLog("        sc list [s <filename>]");
+               PrintAndLog("    l      - load data from file instead of trace buffer");
+               PrintAndLog("    s      - save data to file");
+               PrintAndLog("");
+               PrintAndLog("example: sc list");
+               PrintAndLog("example: sc list save myCardTrace.trc");
+               PrintAndLog("example: sc list l myCardTrace.trc");
+               return 0;
+       }
+
+       uint8_t *trace;
+       uint32_t tracepos = 0;
+       uint32_t traceLen = 0;
+
+       if (loadFromFile) {
+               #define TRACE_CHUNK_SIZE (1<<16)    // 64K to start with. Will be enough for BigBuf and some room for future extensions
+               FILE *tracefile = NULL;
+               size_t bytes_read;
+               trace = malloc(TRACE_CHUNK_SIZE);
+               if (trace == NULL) {
+                       PrintAndLog("Cannot allocate memory for trace");
+                       return 2;
+               }
+               if ((tracefile = fopen(filename,"rb")) == NULL) { 
+                       PrintAndLog("Could not open file %s", filename);
+                       free(trace);
+                       return 0;
+               }
+               while (!feof(tracefile)) {
+                       bytes_read = fread(trace+traceLen, 1, TRACE_CHUNK_SIZE, tracefile);
+                       traceLen += bytes_read;
+                       if (!feof(tracefile)) {
+                               uint8_t *p = realloc(trace, traceLen + TRACE_CHUNK_SIZE);
+                               if (p == NULL) {
+                                       PrintAndLog("Cannot allocate memory for trace");
+                                       free(trace);
+                                       fclose(tracefile);
+                                       return 2;
+                               }
+                               trace = p;
+                       }
+               }
+               fclose(tracefile);
+       } else {
+               trace = malloc(USB_CMD_DATA_SIZE);
+               // Query for the size of the trace
+               UsbCommand response;
+               GetFromBigBuf(trace, USB_CMD_DATA_SIZE, 0, &response, -1, false);
+               traceLen = response.arg[2];
+               if (traceLen > USB_CMD_DATA_SIZE) {
+                       uint8_t *p = realloc(trace, traceLen);
+                       if (p == NULL) {
+                               PrintAndLog("Cannot allocate memory for trace");
+                               free(trace);
+                               return 2;
+                       }
+                       trace = p;
+                       GetFromBigBuf(trace, traceLen, 0, NULL, -1, false);
+               }
+       }
+
+       if (saveToFile) {
+               FILE *tracefile = NULL;
+               if ((tracefile = fopen(filename,"wb")) == NULL) { 
+                       PrintAndLog("Could not create file %s", filename);
+                       return 1;
+               }
+               fwrite(trace, 1, traceLen, tracefile);
+               PrintAndLog("Recorded Activity (TraceLen = %d bytes) written to file %s", traceLen, filename);
+               fclose(tracefile);
+       } else {
+               PrintAndLog("Recorded Activity (TraceLen = %d bytes)", traceLen);
+               PrintAndLog("");
+               PrintAndLog("Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer");
+               PrintAndLog("");
+               PrintAndLog("      Start |        End | Src | Data (! denotes parity error)                                           | CRC | Annotation         |");
+               PrintAndLog("------------|------------|-----|-------------------------------------------------------------------------|-----|--------------------|");
+
+               while(tracepos < traceLen)
+               {
+                       tracepos = printScTraceLine(tracepos, traceLen, trace);
+               }
+       }
+
+       free(trace);
+       return 0;
+}
+
+int CmdSmartList(const char *Cmd) {
+       ScTraceList(Cmd);
+       return 0;
+}
+
+static command_t CommandTable[] = {
+       {"help",    CmdHelp,          1, "This help"},
+       {"list",    CmdSmartList,     0, "List ISO 7816 history"},
+       {"info",    CmdSmartInfo,     1, "Tag information [rdv40]"},
+       {"reader",  CmdSmartReader,   1, "Act like an IS07816 reader [rdv40]"},
+       {"raw",     CmdSmartRaw,      1, "Send raw hex data to tag [rdv40]"},
+       {"upgrade", CmdSmartUpgrade,  1, "Upgrade firmware [rdv40]"},
+       {"setclock",CmdSmartSetClock, 1, "Set clock speed"},
+       {NULL, NULL, 0, NULL}
+};
+
+int CmdSmartcard(const char *Cmd) {
+       clearCommandBuffer();
+       CmdsParse(CommandTable, Cmd);
+       return 0;
+}
+
+int CmdHelp(const char *Cmd) {
+       CmdsHelp(CommandTable);
+       return 0;
+}
diff --git a/client/cmdsmartcard.h b/client/cmdsmartcard.h
new file mode 100644 (file)
index 0000000..caa06f4
--- /dev/null
@@ -0,0 +1,39 @@
+//-----------------------------------------------------------------------------
+// Copyright (C) 2018 iceman
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Proxmark3 RDV40 Smartcard module commands
+//-----------------------------------------------------------------------------
+
+#ifndef CMDSMARTCARD_H__
+#define CMDSMARTCARD_H__
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+#include "proxmark3.h"
+#include "ui.h"
+#include "cmdparser.h"
+#include "common.h"
+#include "util.h"
+#include "loclass/fileutils.h"  // saveFile
+#include "cmdmain.h"            // getfromdevice
+#include "emv/emvcore.h"        // decodeTVL
+#include "emv/apduinfo.h"       // APDUcode description
+
+extern int CmdSmartcard(const char *Cmd);
+
+extern int CmdSmartRaw(const char* cmd);
+extern int CmdSmartUpgrade(const char* cmd);
+extern int CmdSmartInfo(const char* cmd);
+extern int CmdSmartReader(const char *Cmd);
+
+extern int usage_sm_raw(void);
+extern int usage_sm_reader(void);
+extern int usage_sm_info(void);
+extern int usage_sm_upgrade(void);
+#endif
index f470371a3b399e6292f799eea6e3f90ac628d179..7690004707881cd230f566afeed40aa7d49abe6c 100644 (file)
@@ -10,8 +10,8 @@
 //
 // NOTES: 
 // LF Demod functions are placed here to allow the flexability to use client or
-// device side. Most BUT NOT ALL of these functions are currenlty safe for 
-// device side use currently. (DetectST for example...)
+// device side. Most BUT NOT ALL of these functions are currently safe for 
+// device side use. (DetectST for example...)
 //
 // There are likely many improvements to the code that could be made, please
 // make suggestions...
index 57e6011f595a25279e21700de3998ede088d6d21..9ba69d5c6e99f809c382bbca0335ddeecdb123ac 100644 (file)
@@ -200,11 +200,12 @@ NXP/Philips CUSTOM COMMANDS
 #define TOPAZ_WRITE_NE8                                        0x1B    // Write-no-erase (eight bytes)
 
 
-#define ISO_14443A             0
-#define ICLASS                 1
-#define ISO_14443B             2
-#define TOPAZ                  3
-#define PROTO_MIFARE   4
+#define ISO_14443A    0
+#define ICLASS        1
+#define ISO_14443B    2
+#define TOPAZ         3
+#define PROTO_MIFARE  4
+#define ISO_7816_4    5
 
 //-- Picopass fuses
 #define FUSE_FPERS   0x80
@@ -216,6 +217,29 @@ NXP/Philips CUSTOM COMMANDS
 #define FUSE_FPROD0  0x02
 #define FUSE_RA      0x01
 
+// ISO 7816-4 Basic interindustry commands. For command APDU's.
+#define ISO7816_READ_BINARY              0xB0
+#define ISO7816_WRITE_BINARY             0xD0
+#define ISO7816_UPDATE_BINARY            0xD6
+#define ISO7816_ERASE_BINARY             0x0E
+#define ISO7816_READ_RECORDS             0xB2
+#define ISO7816_WRITE_RECORDS            0xD2
+#define ISO7816_APPEND_RECORD            0xE2
+#define ISO7816_UPDATE_RECORD            0xDC
+#define ISO7816_GET_DATA                 0xCA
+#define ISO7816_PUT_DATA                 0xDA
+#define ISO7816_SELECT_FILE              0xA4
+#define ISO7816_VERIFY                   0x20
+#define ISO7816_INTERNAL_AUTHENTICATION  0x88
+#define ISO7816_EXTERNAL_AUTHENTICATION  0x82
+#define ISO7816_GET_CHALLENGE            0xB4
+#define ISO7816_MANAGE_CHANNEL           0x70
+// ISO7816-4   For response APDU's
+#define ISO7816_OK                       0x9000
+//     6x xx = ERROR
+
+
+
 void printIclassDumpInfo(uint8_t* iclass_dump);
 void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
 
index fc309cde6cedb60fd86f12a72aaeb44110f832e2..756683cdde7d906336935073bbfa1bf29745612e 100644 (file)
@@ -71,21 +71,8 @@ always @(negedge ssp_clk)
 
 assign ssp_frame = (hi_byte_div == 3'b000);
 
-// Implement a hysteresis to give out the received signal on
-// ssp_din. Sample at fc.
-assign adc_clk = ck_1356meg;
+assign ssp_din = 1'b0;
 
-// ADC data appears on the rising edge, so sample it on the falling edge
-reg after_hysteresis;
-always @(negedge adc_clk)
-begin
-    if(& adc_d[7:0]) after_hysteresis <= 1'b1;
-    else if(~(| adc_d[7:0])) after_hysteresis <= 1'b0;
-end
-
-
-assign ssp_din = after_hysteresis;
-
-assign dbg = ssp_din;
+assign dbg = ssp_frame;
 
-endmodule
+endmodule
\ No newline at end of file
diff --git a/include/legic.h b/include/legic.h
new file mode 100644 (file)
index 0000000..246af0e
--- /dev/null
@@ -0,0 +1,27 @@
+//-----------------------------------------------------------------------------
+// (c) 2016 Iceman
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// LEGIC type prototyping
+//-----------------------------------------------------------------------------
+
+#ifndef _LEGIC_H_
+#define _LEGIC_H_
+
+#include "common.h"
+
+//-----------------------------------------------------------------------------
+// LEGIC
+//-----------------------------------------------------------------------------
+typedef struct {
+       uint8_t uid[4];
+       uint32_t tagtype;
+       uint8_t cmdsize;
+       uint8_t addrsize;
+       uint16_t cardsize;      
+} legic_card_select_t;
+
+#endif // _LEGIC_H_
diff --git a/include/smartcard.h b/include/smartcard.h
new file mode 100644 (file)
index 0000000..9bed8c9
--- /dev/null
@@ -0,0 +1,29 @@
+//-----------------------------------------------------------------------------
+// (c) 2018 Iceman, adapted by Marshmellow 
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// smart card type prototyping
+//-----------------------------------------------------------------------------
+#ifndef __SMARTCARD_H
+#define __SMARTCARD_H
+
+//-----------------------------------------------------------------------------
+// ISO 7618  Smart Card 
+//-----------------------------------------------------------------------------
+typedef struct {
+       uint8_t atr_len;
+       uint8_t atr[30];
+} __attribute__((__packed__)) smart_card_atr_t;
+
+typedef enum SMARTCARD_COMMAND {
+       SC_CONNECT =       (1 << 0),
+       SC_NO_DISCONNECT = (1 << 1),
+       SC_RAW =           (1 << 2),
+       SC_NO_SELECT =     (1 << 3)
+} smartcard_command_t;
+
+
+#endif
index 194a9d53bdb5377246c5f8e15c56233caec69294..bdff726142d635ed089603de9809986660217513 100644 (file)
@@ -60,8 +60,17 @@ typedef struct{
 #define CMD_BUFF_CLEAR                                                    0x0105
 #define CMD_READ_MEM                                                      0x0106
 #define CMD_VERSION                                                       0x0107
-#define CMD_STATUS                                                                                                               0x0108
-#define CMD_PING                                                                                                                 0x0109
+#define CMD_STATUS                                                        0x0108
+#define CMD_PING                                                          0x0109
+
+// RDV40,  Smart card operations
+#define CMD_SMART_RAW                                                     0x0140
+#define CMD_SMART_UPGRADE                                                 0x0141
+#define CMD_SMART_UPLOAD                                                  0x0142
+#define CMD_SMART_ATR                                                     0x0143
+// CMD_SMART_SETBAUD is unused for now
+#define CMD_SMART_SETBAUD                                                 0x0144
+#define CMD_SMART_SETCLOCK                                                0x0145
 
 // For low-frequency tags
 #define CMD_READ_TI_TYPE                                                  0x0202
@@ -126,10 +135,10 @@ typedef struct{
 #define CMD_READER_HITAG                                                  0x0372
 
 #define CMD_SIMULATE_HITAG_S                                              0x0368
-#define CMD_TEST_HITAGS_TRACES                                           0x0367
-#define CMD_READ_HITAG_S                                                 0x0373
-#define CMD_WR_HITAG_S                                                   0x0375
-#define CMD_EMU_HITAG_S                                                          0x0376
+#define CMD_TEST_HITAGS_TRACES                                            0x0367
+#define CMD_READ_HITAG_S                                                  0x0373
+#define CMD_WR_HITAG_S                                                    0x0375
+#define CMD_EMU_HITAG_S                                                   0x0376
 
 
 #define CMD_SIMULATE_TAG_ISO_14443B                                       0x0381
Impressum, Datenschutz