--- /dev/null
+
+--[[
+ This is a library to read 14443b tags. It can be used something like this
+
+ local reader = require('read14b')
+ result, err = reader.select1443b()
+ if not result then
+ print(err)
+ return
+ end
+ print(result.name)
+
+--]]
+-- Loads the commands-library
+local cmds = require('commands')
+local utils = require('utils')
+local TIMEOUT = 10000 -- Shouldn't take longer than 2 seconds
+
+local function parse1443b_reqb(data)
+ --[[
+ --]]
+ local pcb = data:sub(1,2)
+ local uid = data:sub(3,10)
+ local pps = data:sub(11,18)
+ local ats = data:sub(19,24)
+ local crc = data:sub(25,29)
+ return { pcb = pcb, uid = uid, pps = pps, ats = ats, crc = crc, cid = '' }
+end
+
+local function parse1443b_attrib(data)
+ --[[
+ --]]
+ local attrib = data:sub(1,2)
+ local crc = data:sub(3,7)
+ return { attrib = attrib, crc = crc }
+end
+
+
+--- Sends a USBpacket to the device
+-- @param command - the usb packet to send
+-- @param readresponse - if set to true, we read the device answer packet
+-- which is usually recipe for fail. If not sent, the host will wait 2s for a
+-- response of type CMD_ACK
+-- @return packet,nil if successfull
+-- nil, errormessage if unsuccessfull
+local function sendToDevice(cmd, readresponse)
+ core.clearCommandBuffer()
+ local err = core.SendCommand(cmd:getBytes())
+ if err then
+ print(err)
+ return nil, err
+ end
+ if readresponse == 0 then return '',nil end
+ local response = core.WaitForResponseTimeout(cmds.CMD_ACK, TIMEOUT)
+ if response == nil then return nil, nil end
+ return response,nil
+end
+--- Picks out and displays the data read from a tag
+-- Specifically, takes a usb packet, converts to a Command
+-- (as in commands.lua), takes the data-array and
+-- reads the number of bytes specified in arg1 (arg0 in c-struct)
+-- and displays the data
+-- @param usbpacket the data received from the device
+local function showData(usbpacket)
+ local response = Command.parse(usbpacket)
+ local len = tonumber(response.arg1) * 2
+ local data = string.sub(response.data, 0, len);
+ print("<< ",data)
+end
+
+---
+-- Sends a usbpackage , "hf 14b raw" and the 14bCrc is added to the rawdata before sending
+local function sendRaw(rawdata, readresponse, addcrc)
+ -- add crc first
+ local rawdata_crc = rawdata
+ if ( addcrc == 1) then
+ rawdata_crc = utils.Crc14b(rawdata)
+ end
+ print(">> ", rawdata_crc)
+
+ local command = Command:new{cmd = cmds.CMD_ISO_14443B_COMMAND,
+ arg1 = #rawdata_crc/2, -- LEN of data, which is half the length of the ASCII-string rawdata
+ arg2 = readresponse, -- read response
+ arg3 = 1, -- leave power on
+ data = rawdata_crc} -- raw data bytes
+ return sendToDevice(command, readresponse)
+end
+
+-- This function does a connect and retrieves some info
+-- @return if successfull: an table containing card info
+-- @return if unsuccessfull : nil, error
+
+-- void SendRawCommand14443B(uint32_t datalen, uint32_t recv, uint8_t powerfield, uint8_t data[])
+local function select1443b()
+
+ local result, infoReqb, infoAttrib, infoPong, err, resp, len, data
+ local goodReqbResponse = false
+ --REQB
+ local p = 5
+ while p > 0 do
+ -- 05 00 08
+ -- 05
+ -- command (REQB/WUPB)
+ -- 00
+ -- AFI application family identifier ( 00 == all sorts)
+ -- 08 (ie WUPB)
+ -- bit 0-1-2 | N slots ( 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 == 16)
+ -- bit 3 | (1== WUPB, 0 == REQB)
+ -- bit 4-5-6-7 | AFI application family identifier
+ local result, err = sendRaw('050000', 1, 1)
+ if result then
+ resp = Command.parse( result )
+ len = tonumber(resp.arg1) * 2
+ local data = string.sub(resp.data, 0, len)
+ if ( resp.arg1 == 14 ) then
+ --print ('DATA ::', data)
+ infoReqb, err = parse1443b_reqb(data)
+ --print(infoReqb.pcb, infoReqb.uid, infoReqb.pps, infoReqb.ats, infoReqb.crc)
+ goodReqbResponse = true
+ break -- break while loop. REQB got a good response
+ end
+ end
+
+ -- send some strange 0A/0C
+ if ( p < 3) then
+ sendRaw('0A', 0, 0)
+ sendRaw('0C', 0, 0)
+ end
+
+ p = p - 1
+ print('retrying')
+ end
+
+ if goodReqbResponse == false then
+ err = "No response from card"
+ print(err)
+ return nil, err
+ end
+ --SLOT MARKER
+ -- result, err = sendRaw('05', 1, 1)
+ -- if result then
+ -- showData(result)
+ -- resp = Command.parse( result )
+ -- if arg1 == 0 then
+ -- return nil, "iso14443b card - SLOT MARKER failed"
+ -- end
+ -- len = tonumber(resp.arg1) * 2
+ -- data = string.sub(resp.data, 0, len)
+ -- infoAttrib, err = parse1443b_attrib(data)
+ -- print( infoAttrib.attrib, infoAttrib.crc)
+ -- else
+ -- err ="No response from card"
+ -- print(err)
+ -- return nil, err
+ -- end
+
+ --ATTRIB
+ local cid = '00'
+ result, err = sendRaw('1D'..infoReqb.uid..'000801'..cid, 1, 1)
+ if result then
+ showData(result)
+ resp = Command.parse( result )
+ if resp.arg1 == 0 then
+ return nil, "iso14443b card - ATTRIB failed"
+ end
+ len = tonumber(resp.arg1) * 2
+ data = string.sub(resp.data, 0, len)
+ infoAttrib, err = parse1443b_attrib(data)
+ infoReqb.cid = infoAttrib.attrib:sub(2,2)
+ else
+ err ="No response from card"
+ print(err)
+ return nil, err
+ end
+
+ --PING / PONG - Custom Anticollison for Navigo.
+ local ping = ('BA00')
+ result, err = sendRaw(ping, 1, 1)
+ if result then
+ resp = Command.parse( result )
+ if arg1 == 0 then
+ return nil, "iso14443b card - PING/PONG failed"
+ end
+ showData(result)
+ else
+ err = "No response from card"
+ print(err)
+ return nil, err
+ end
+
+ return infoReqb
+end
+
+---
+-- Waits for a mifare card to be placed within the vicinity of the reader.
+-- @return if successfull: an table containing card info
+-- @return if unsuccessfull : nil, error
+local function waitFor14443b()
+ print("Waiting for card... press any key to quit")
+ while not core.ukbhit() do
+ res, err = select1443b()
+ if res then return res end
+ -- err means that there was no response from card
+ end
+ return nil, "Aborted by user"
+end
+
+local function disconnect(uid)
+
+ local halt = ('50'..uid) -- 50 UID0 UID1 UID2 UID3 CRC1 CRC2
+ result, err = sendRaw(halt, 1, 1)
+ if result then
+ resp = Command.parse( result )
+ showData(result) -- expected answer is 00 CRC1 CRC2
+ else
+ err = "No response from card"
+ print(err)
+ return nil, err
+ end
+
+ -- shutdown raw command / pm3 device.
+ local command = Command:new{ cmd = cmds.CMD_ISO_14443B_COMMAND, arg1 = 0, arg2 = 0, arg3 = 0 }
+ -- We can ignore the response here, no ACK is returned for this command
+ -- Check /armsrc/iso14443b.c, SendRawCommand14443B() for details
+ return sendToDevice(command, 0)
+end
+
+local library = {
+ select1443b = select1443b,
+ select = select1443b,
+ waitFor14443b = waitFor14443b,
+ sendToDevice = sendToDevice,
+ disconnect = disconnect,
+ sendRaw = sendRaw,
+ showData = showData,
+}
+
+return library
\ No newline at end of file
projects / proxmark3-svn / commitdiff