void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
{
- int divisor_used = 95; // 125 KHz
- // see if 'h' was specified
+ int divisor_used = 95; // 125 KHz
+ // see if 'h' was specified
- if (command[strlen((char *) command) - 1] == 'h')
- divisor_used = 88; // 134.8 KHz
+ if (command[strlen((char *) command) - 1] == 'h')
+ divisor_used = 88; // 134.8 KHz
sample_config sc = { 0,0,1, divisor_used, 0};
setSamplingConfig(&sc);
// And a little more time for the tag to fully power up
SpinDelay(2000);
- // now modulate the reader field
- while(*command != '\0' && *command != ' ') {
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- LED_D_OFF();
- SpinDelayUs(delay_off);
+ // now modulate the reader field
+ while(*command != '\0' && *command != ' ') {
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ LED_D_OFF();
+ SpinDelayUs(delay_off);
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
- LED_D_ON();
- if(*(command++) == '0')
- SpinDelayUs(period_0);
- else
- SpinDelayUs(period_1);
- }
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- LED_D_OFF();
- SpinDelayUs(delay_off);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+ LED_D_ON();
+ if(*(command++) == '0')
+ SpinDelayUs(period_0);
+ else
+ SpinDelayUs(period_1);
+ }
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ LED_D_OFF();
+ SpinDelayUs(delay_off);
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
- // now do the read
+ // now do the read
DoAcquisition_config(false);
}
*/
void ReadTItag(void)
{
- // some hardcoded initial params
- // when we read a TI tag we sample the zerocross line at 2Mhz
- // TI tags modulate a 1 as 16 cycles of 123.2Khz
- // TI tags modulate a 0 as 16 cycles of 134.2Khz
+ // some hardcoded initial params
+ // when we read a TI tag we sample the zerocross line at 2Mhz
+ // TI tags modulate a 1 as 16 cycles of 123.2Khz
+ // TI tags modulate a 0 as 16 cycles of 134.2Khz
#define FSAMPLE 2000000
#define FREQLO 123200
#define FREQHI 134200
- signed char *dest = (signed char *)BigBuf_get_addr();
- uint16_t n = BigBuf_max_traceLen();
- // 128 bit shift register [shift3:shift2:shift1:shift0]
- uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
-
- int i, cycles=0, samples=0;
- // how many sample points fit in 16 cycles of each frequency
- uint32_t sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI;
- // when to tell if we're close enough to one freq or another
- uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
-
- // TI tags charge at 134.2Khz
- FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-
- // Place FPGA in passthrough mode, in this mode the CROSS_LO line
- // connects to SSP_DIN and the SSP_DOUT logic level controls
- // whether we're modulating the antenna (high)
- // or listening to the antenna (low)
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
-
- // get TI tag data into the buffer
- AcquireTiType();
-
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-
- for (i=0; i<n-1; i++) {
- // count cycles by looking for lo to hi zero crossings
- if ( (dest[i]<0) && (dest[i+1]>0) ) {
- cycles++;
- // after 16 cycles, measure the frequency
- if (cycles>15) {
- cycles=0;
- samples=i-samples; // number of samples in these 16 cycles
-
- // TI bits are coming to us lsb first so shift them
- // right through our 128 bit right shift register
- shift0 = (shift0>>1) | (shift1 << 31);
- shift1 = (shift1>>1) | (shift2 << 31);
- shift2 = (shift2>>1) | (shift3 << 31);
- shift3 >>= 1;
-
- // check if the cycles fall close to the number
- // expected for either the low or high frequency
- if ( (samples>(sampleslo-threshold)) && (samples<(sampleslo+threshold)) ) {
- // low frequency represents a 1
- shift3 |= (1<<31);
- } else if ( (samples>(sampleshi-threshold)) && (samples<(sampleshi+threshold)) ) {
- // high frequency represents a 0
- } else {
- // probably detected a gay waveform or noise
- // use this as gaydar or discard shift register and start again
- shift3 = shift2 = shift1 = shift0 = 0;
- }
- samples = i;
-
- // for each bit we receive, test if we've detected a valid tag
-
- // if we see 17 zeroes followed by 6 ones, we might have a tag
- // remember the bits are backwards
- if ( ((shift0 & 0x7fffff) == 0x7e0000) ) {
- // if start and end bytes match, we have a tag so break out of the loop
- if ( ((shift0>>16)&0xff) == ((shift3>>8)&0xff) ) {
- cycles = 0xF0B; //use this as a flag (ugly but whatever)
- break;
- }
- }
- }
- }
- }
-
- // if flag is set we have a tag
- if (cycles!=0xF0B) {
- DbpString("Info: No valid tag detected.");
- } else {
- // put 64 bit data into shift1 and shift0
- shift0 = (shift0>>24) | (shift1 << 8);
- shift1 = (shift1>>24) | (shift2 << 8);
-
- // align 16 bit crc into lower half of shift2
- shift2 = ((shift2>>24) | (shift3 << 8)) & 0x0ffff;
-
- // if r/w tag, check ident match
+ signed char *dest = (signed char *)BigBuf_get_addr();
+ uint16_t n = BigBuf_max_traceLen();
+ // 128 bit shift register [shift3:shift2:shift1:shift0]
+ uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
+
+ int i, cycles=0, samples=0;
+ // how many sample points fit in 16 cycles of each frequency
+ uint32_t sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI;
+ // when to tell if we're close enough to one freq or another
+ uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
+
+ // TI tags charge at 134.2Khz
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
+
+ // Place FPGA in passthrough mode, in this mode the CROSS_LO line
+ // connects to SSP_DIN and the SSP_DOUT logic level controls
+ // whether we're modulating the antenna (high)
+ // or listening to the antenna (low)
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
+
+ // get TI tag data into the buffer
+ AcquireTiType();
+
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+
+ for (i=0; i<n-1; i++) {
+ // count cycles by looking for lo to hi zero crossings
+ if ( (dest[i]<0) && (dest[i+1]>0) ) {
+ cycles++;
+ // after 16 cycles, measure the frequency
+ if (cycles>15) {
+ cycles=0;
+ samples=i-samples; // number of samples in these 16 cycles
+
+ // TI bits are coming to us lsb first so shift them
+ // right through our 128 bit right shift register
+ shift0 = (shift0>>1) | (shift1 << 31);
+ shift1 = (shift1>>1) | (shift2 << 31);
+ shift2 = (shift2>>1) | (shift3 << 31);
+ shift3 >>= 1;
+
+ // check if the cycles fall close to the number
+ // expected for either the low or high frequency
+ if ( (samples>(sampleslo-threshold)) && (samples<(sampleslo+threshold)) ) {
+ // low frequency represents a 1
+ shift3 |= (1<<31);
+ } else if ( (samples>(sampleshi-threshold)) && (samples<(sampleshi+threshold)) ) {
+ // high frequency represents a 0
+ } else {
+ // probably detected a gay waveform or noise
+ // use this as gaydar or discard shift register and start again
+ shift3 = shift2 = shift1 = shift0 = 0;
+ }
+ samples = i;
+
+ // for each bit we receive, test if we've detected a valid tag
+
+ // if we see 17 zeroes followed by 6 ones, we might have a tag
+ // remember the bits are backwards
+ if ( ((shift0 & 0x7fffff) == 0x7e0000) ) {
+ // if start and end bytes match, we have a tag so break out of the loop
+ if ( ((shift0>>16)&0xff) == ((shift3>>8)&0xff) ) {
+ cycles = 0xF0B; //use this as a flag (ugly but whatever)
+ break;
+ }
+ }
+ }
+ }
+ }
+
+ // if flag is set we have a tag
+ if (cycles!=0xF0B) {
+ DbpString("Info: No valid tag detected.");
+ } else {
+ // put 64 bit data into shift1 and shift0
+ shift0 = (shift0>>24) | (shift1 << 8);
+ shift1 = (shift1>>24) | (shift2 << 8);
+
+ // align 16 bit crc into lower half of shift2
+ shift2 = ((shift2>>24) | (shift3 << 8)) & 0x0ffff;
+
+ // if r/w tag, check ident match
if (shift3 & (1<<15) ) {
- DbpString("Info: TI tag is rewriteable");
- // only 15 bits compare, last bit of ident is not valid
+ DbpString("Info: TI tag is rewriteable");
+ // only 15 bits compare, last bit of ident is not valid
if (((shift3 >> 16) ^ shift0) & 0x7fff ) {
- DbpString("Error: Ident mismatch!");
- } else {
- DbpString("Info: TI tag ident is valid");
- }
- } else {
- DbpString("Info: TI tag is readonly");
- }
-
- // WARNING the order of the bytes in which we calc crc below needs checking
- // i'm 99% sure the crc algorithm is correct, but it may need to eat the
- // bytes in reverse or something
- // calculate CRC
- uint32_t crc=0;
-
- crc = update_crc16(crc, (shift0)&0xff);
- crc = update_crc16(crc, (shift0>>8)&0xff);
- crc = update_crc16(crc, (shift0>>16)&0xff);
- crc = update_crc16(crc, (shift0>>24)&0xff);
- crc = update_crc16(crc, (shift1)&0xff);
- crc = update_crc16(crc, (shift1>>8)&0xff);
- crc = update_crc16(crc, (shift1>>16)&0xff);
- crc = update_crc16(crc, (shift1>>24)&0xff);
-
- Dbprintf("Info: Tag data: %x%08x, crc=%x",
- (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF);
- if (crc != (shift2&0xffff)) {
- Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc);
- } else {
- DbpString("Info: CRC is good");
- }
- }
+ DbpString("Error: Ident mismatch!");
+ } else {
+ DbpString("Info: TI tag ident is valid");
+ }
+ } else {
+ DbpString("Info: TI tag is readonly");
+ }
+
+ // WARNING the order of the bytes in which we calc crc below needs checking
+ // i'm 99% sure the crc algorithm is correct, but it may need to eat the
+ // bytes in reverse or something
+ // calculate CRC
+ uint32_t crc=0;
+
+ crc = update_crc16(crc, (shift0)&0xff);
+ crc = update_crc16(crc, (shift0>>8)&0xff);
+ crc = update_crc16(crc, (shift0>>16)&0xff);
+ crc = update_crc16(crc, (shift0>>24)&0xff);
+ crc = update_crc16(crc, (shift1)&0xff);
+ crc = update_crc16(crc, (shift1>>8)&0xff);
+ crc = update_crc16(crc, (shift1>>16)&0xff);
+ crc = update_crc16(crc, (shift1>>24)&0xff);
+
+ Dbprintf("Info: Tag data: %x%08x, crc=%x",
+ (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF);
+ if (crc != (shift2&0xffff)) {
+ Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc);
+ } else {
+ DbpString("Info: CRC is good");
+ }
+ }
}
void WriteTIbyte(uint8_t b)
{
- int i = 0;
-
- // modulate 8 bits out to the antenna
- for (i=0; i<8; i++)
- {
- if (b&(1<<i)) {
- // stop modulating antenna
- LOW(GPIO_SSC_DOUT);
- SpinDelayUs(1000);
- // modulate antenna
- HIGH(GPIO_SSC_DOUT);
- SpinDelayUs(1000);
- } else {
- // stop modulating antenna
- LOW(GPIO_SSC_DOUT);
- SpinDelayUs(300);
- // modulate antenna
- HIGH(GPIO_SSC_DOUT);
- SpinDelayUs(1700);
- }
- }
+ int i = 0;
+
+ // modulate 8 bits out to the antenna
+ for (i=0; i<8; i++)
+ {
+ if (b&(1<<i)) {
+ // stop modulating antenna
+ LOW(GPIO_SSC_DOUT);
+ SpinDelayUs(1000);
+ // modulate antenna
+ HIGH(GPIO_SSC_DOUT);
+ SpinDelayUs(1000);
+ } else {
+ // stop modulating antenna
+ LOW(GPIO_SSC_DOUT);
+ SpinDelayUs(300);
+ // modulate antenna
+ HIGH(GPIO_SSC_DOUT);
+ SpinDelayUs(1700);
+ }
+ }
}
void AcquireTiType(void)
{
- int i, j, n;
- // tag transmission is <20ms, sampling at 2M gives us 40K samples max
- // each sample is 1 bit stuffed into a uint32_t so we need 1250 uint32_t
+ int i, j, n;
+ // tag transmission is <20ms, sampling at 2M gives us 40K samples max
+ // each sample is 1 bit stuffed into a uint32_t so we need 1250 uint32_t
#define TIBUFLEN 1250
- // clear buffer
+ // clear buffer
uint32_t *BigBuf = (uint32_t *)BigBuf_get_addr();
- memset(BigBuf,0,BigBuf_max_traceLen()/sizeof(uint32_t));
-
- // Set up the synchronous serial port
- AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
- AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN;
-
- // steal this pin from the SSP and use it to control the modulation
- AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
- AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
-
- AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
- AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;
-
- // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long
- // 48/2 = 24 MHz clock must be divided by 12
- AT91C_BASE_SSC->SSC_CMR = 12;
-
- AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0);
- AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF;
- AT91C_BASE_SSC->SSC_TCMR = 0;
- AT91C_BASE_SSC->SSC_TFMR = 0;
-
- LED_D_ON();
-
- // modulate antenna
- HIGH(GPIO_SSC_DOUT);
-
- // Charge TI tag for 50ms.
- SpinDelay(50);
-
- // stop modulating antenna and listen
- LOW(GPIO_SSC_DOUT);
-
- LED_D_OFF();
-
- i = 0;
- for(;;) {
- if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
- BigBuf[i] = AT91C_BASE_SSC->SSC_RHR; // store 32 bit values in buffer
- i++; if(i >= TIBUFLEN) break;
- }
- WDT_HIT();
- }
-
- // return stolen pin to SSP
- AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
- AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;
-
- char *dest = (char *)BigBuf_get_addr();
- n = TIBUFLEN*32;
- // unpack buffer
- for (i=TIBUFLEN-1; i>=0; i--) {
- for (j=0; j<32; j++) {
- if(BigBuf[i] & (1 << j)) {
- dest[--n] = 1;
- } else {
- dest[--n] = -1;
- }
- }
- }
+ memset(BigBuf,0,BigBuf_max_traceLen()/sizeof(uint32_t));
+
+ // Set up the synchronous serial port
+ AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
+ AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN;
+
+ // steal this pin from the SSP and use it to control the modulation
+ AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
+ AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
+
+ AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
+ AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;
+
+ // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long
+ // 48/2 = 24 MHz clock must be divided by 12
+ AT91C_BASE_SSC->SSC_CMR = 12;
+
+ AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0);
+ AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF;
+ AT91C_BASE_SSC->SSC_TCMR = 0;
+ AT91C_BASE_SSC->SSC_TFMR = 0;
+
+ LED_D_ON();
+
+ // modulate antenna
+ HIGH(GPIO_SSC_DOUT);
+
+ // Charge TI tag for 50ms.
+ SpinDelay(50);
+
+ // stop modulating antenna and listen
+ LOW(GPIO_SSC_DOUT);
+
+ LED_D_OFF();
+
+ i = 0;
+ for(;;) {
+ if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+ BigBuf[i] = AT91C_BASE_SSC->SSC_RHR; // store 32 bit values in buffer
+ i++; if(i >= TIBUFLEN) break;
+ }
+ WDT_HIT();
+ }
+
+ // return stolen pin to SSP
+ AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
+ AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;
+
+ char *dest = (char *)BigBuf_get_addr();
+ n = TIBUFLEN*32;
+ // unpack buffer
+ for (i=TIBUFLEN-1; i>=0; i--) {
+ for (j=0; j<32; j++) {
+ if(BigBuf[i] & (1 << j)) {
+ dest[--n] = 1;
+ } else {
+ dest[--n] = -1;
+ }
+ }
+ }
}
// arguments: 64bit data split into 32bit idhi:idlo and optional 16bit crc
// if not provided a valid crc will be computed from the data and written.
void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
{
- FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
- if(crc == 0) {
- crc = update_crc16(crc, (idlo)&0xff);
- crc = update_crc16(crc, (idlo>>8)&0xff);
- crc = update_crc16(crc, (idlo>>16)&0xff);
- crc = update_crc16(crc, (idlo>>24)&0xff);
- crc = update_crc16(crc, (idhi)&0xff);
- crc = update_crc16(crc, (idhi>>8)&0xff);
- crc = update_crc16(crc, (idhi>>16)&0xff);
- crc = update_crc16(crc, (idhi>>24)&0xff);
- }
- Dbprintf("Writing to tag: %x%08x, crc=%x",
- (unsigned int) idhi, (unsigned int) idlo, crc);
-
- // TI tags charge at 134.2Khz
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
- // Place FPGA in passthrough mode, in this mode the CROSS_LO line
- // connects to SSP_DIN and the SSP_DOUT logic level controls
- // whether we're modulating the antenna (high)
- // or listening to the antenna (low)
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
- LED_A_ON();
-
- // steal this pin from the SSP and use it to control the modulation
- AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
- AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
-
- // writing algorithm:
- // a high bit consists of a field off for 1ms and field on for 1ms
- // a low bit consists of a field off for 0.3ms and field on for 1.7ms
- // initiate a charge time of 50ms (field on) then immediately start writing bits
- // start by writing 0xBB (keyword) and 0xEB (password)
- // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer)
- // finally end with 0x0300 (write frame)
- // all data is sent lsb firts
- // finish with 15ms programming time
-
- // modulate antenna
- HIGH(GPIO_SSC_DOUT);
- SpinDelay(50); // charge time
-
- WriteTIbyte(0xbb); // keyword
- WriteTIbyte(0xeb); // password
- WriteTIbyte( (idlo )&0xff );
- WriteTIbyte( (idlo>>8 )&0xff );
- WriteTIbyte( (idlo>>16)&0xff );
- WriteTIbyte( (idlo>>24)&0xff );
- WriteTIbyte( (idhi )&0xff );
- WriteTIbyte( (idhi>>8 )&0xff );
- WriteTIbyte( (idhi>>16)&0xff );
- WriteTIbyte( (idhi>>24)&0xff ); // data hi to lo
- WriteTIbyte( (crc )&0xff ); // crc lo
- WriteTIbyte( (crc>>8 )&0xff ); // crc hi
- WriteTIbyte(0x00); // write frame lo
- WriteTIbyte(0x03); // write frame hi
- HIGH(GPIO_SSC_DOUT);
- SpinDelay(50); // programming time
-
- LED_A_OFF();
-
- // get TI tag data into the buffer
- AcquireTiType();
-
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- DbpString("Now use tiread to check");
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ if(crc == 0) {
+ crc = update_crc16(crc, (idlo)&0xff);
+ crc = update_crc16(crc, (idlo>>8)&0xff);
+ crc = update_crc16(crc, (idlo>>16)&0xff);
+ crc = update_crc16(crc, (idlo>>24)&0xff);
+ crc = update_crc16(crc, (idhi)&0xff);
+ crc = update_crc16(crc, (idhi>>8)&0xff);
+ crc = update_crc16(crc, (idhi>>16)&0xff);
+ crc = update_crc16(crc, (idhi>>24)&0xff);
+ }
+ Dbprintf("Writing to tag: %x%08x, crc=%x",
+ (unsigned int) idhi, (unsigned int) idlo, crc);
+
+ // TI tags charge at 134.2Khz
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
+ // Place FPGA in passthrough mode, in this mode the CROSS_LO line
+ // connects to SSP_DIN and the SSP_DOUT logic level controls
+ // whether we're modulating the antenna (high)
+ // or listening to the antenna (low)
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
+ LED_A_ON();
+
+ // steal this pin from the SSP and use it to control the modulation
+ AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
+ AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
+
+ // writing algorithm:
+ // a high bit consists of a field off for 1ms and field on for 1ms
+ // a low bit consists of a field off for 0.3ms and field on for 1.7ms
+ // initiate a charge time of 50ms (field on) then immediately start writing bits
+ // start by writing 0xBB (keyword) and 0xEB (password)
+ // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer)
+ // finally end with 0x0300 (write frame)
+ // all data is sent lsb firts
+ // finish with 15ms programming time
+
+ // modulate antenna
+ HIGH(GPIO_SSC_DOUT);
+ SpinDelay(50); // charge time
+
+ WriteTIbyte(0xbb); // keyword
+ WriteTIbyte(0xeb); // password
+ WriteTIbyte( (idlo )&0xff );
+ WriteTIbyte( (idlo>>8 )&0xff );
+ WriteTIbyte( (idlo>>16)&0xff );
+ WriteTIbyte( (idlo>>24)&0xff );
+ WriteTIbyte( (idhi )&0xff );
+ WriteTIbyte( (idhi>>8 )&0xff );
+ WriteTIbyte( (idhi>>16)&0xff );
+ WriteTIbyte( (idhi>>24)&0xff ); // data hi to lo
+ WriteTIbyte( (crc )&0xff ); // crc lo
+ WriteTIbyte( (crc>>8 )&0xff ); // crc hi
+ WriteTIbyte(0x00); // write frame lo
+ WriteTIbyte(0x03); // write frame hi
+ HIGH(GPIO_SSC_DOUT);
+ SpinDelay(50); // programming time
+
+ LED_A_OFF();
+
+ // get TI tag data into the buffer
+ AcquireTiType();
+
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ DbpString("Now use tiread to check");
}
void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
{
- int i;
- uint8_t *tab = BigBuf_get_addr();
+ int i;
+ uint8_t *tab = BigBuf_get_addr();
- FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
- AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
+ AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
- AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
- AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
+ AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
+ AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
#define SHORT_COIL() LOW(GPIO_SSC_DOUT)
#define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
- i = 0;
- for(;;) {
- //wait until SSC_CLK goes HIGH
- while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
+ i = 0;
+ for(;;) {
+ //wait until SSC_CLK goes HIGH
+ while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
if(BUTTON_PRESS() || usb_poll()) {
- DbpString("Stopped");
- return;
- }
- WDT_HIT();
- }
- if (ledcontrol)
- LED_D_ON();
-
- if(tab[i])
- OPEN_COIL();
- else
- SHORT_COIL();
-
- if (ledcontrol)
- LED_D_OFF();
- //wait until SSC_CLK goes LOW
- while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
- if(BUTTON_PRESS()) {
- DbpString("Stopped");
- return;
- }
- WDT_HIT();
- }
-
- i++;
- if(i == period) {
-
- i = 0;
- if (gap) {
- SHORT_COIL();
- SpinDelayUs(gap);
- }
- }
- }
+ DbpString("Stopped");
+ return;
+ }
+ WDT_HIT();
+ }
+ if (ledcontrol)
+ LED_D_ON();
+
+ if(tab[i])
+ OPEN_COIL();
+ else
+ SHORT_COIL();
+
+ if (ledcontrol)
+ LED_D_OFF();
+ //wait until SSC_CLK goes LOW
+ while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
+ if(BUTTON_PRESS()) {
+ DbpString("Stopped");
+ return;
+ }
+ WDT_HIT();
+ }
+
+ i++;
+ if(i == period) {
+
+ i = 0;
+ if (gap) {
+ SHORT_COIL();
+ SpinDelayUs(gap);
+ }
+ }
+ }
}
#define DEBUG_FRAME_CONTENTS 1
// compose fc/8 fc/10 waveform (FSK2)
static void fc(int c, int *n)
{
- uint8_t *dest = BigBuf_get_addr();
- int idx;
-
- // for when we want an fc8 pattern every 4 logical bits
- if(c==0) {
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- }
-
- // an fc/8 encoded bit is a bit pattern of 11110000 x6 = 48 samples
- if(c==8) {
- for (idx=0; idx<6; idx++) {
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- }
- }
-
- // an fc/10 encoded bit is a bit pattern of 1111100000 x5 = 50 samples
- if(c==10) {
- for (idx=0; idx<5; idx++) {
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=1;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- dest[((*n)++)]=0;
- }
- }
+ uint8_t *dest = BigBuf_get_addr();
+ int idx;
+
+ // for when we want an fc8 pattern every 4 logical bits
+ if(c==0) {
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ }
+
+ // an fc/8 encoded bit is a bit pattern of 11110000 x6 = 48 samples
+ if(c==8) {
+ for (idx=0; idx<6; idx++) {
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ }
+ }
+
+ // an fc/10 encoded bit is a bit pattern of 1111100000 x5 = 50 samples
+ if(c==10) {
+ for (idx=0; idx<5; idx++) {
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=1;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ dest[((*n)++)]=0;
+ }
+ }
}
// compose fc/X fc/Y waveform (FSKx)
static void fcAll(uint8_t fc, int *n, uint8_t clock, uint16_t *modCnt)
{
- uint8_t *dest = BigBuf_get_addr();
- uint8_t halfFC = fc/2;
- uint8_t wavesPerClock = clock/fc;
- uint8_t mod = clock % fc; //modifier
- uint8_t modAdj = fc/mod; //how often to apply modifier
- bool modAdjOk = !(fc % mod); //if (fc % mod==0) modAdjOk=TRUE;
- // loop through clock - step field clock
- for (uint8_t idx=0; idx < wavesPerClock; idx++){
- // put 1/2 FC length 1's and 1/2 0's per field clock wave (to create the wave)
- memset(dest+(*n), 0, fc-halfFC); //in case of odd number use extra here
- memset(dest+(*n)+(fc-halfFC), 1, halfFC);
- *n += fc;
- }
- if (mod>0) (*modCnt)++;
- if ((mod>0) && modAdjOk){ //fsk2
- if ((*modCnt % modAdj) == 0){ //if 4th 8 length wave in a rf/50 add extra 8 length wave
- memset(dest+(*n), 0, fc-halfFC);
- memset(dest+(*n)+(fc-halfFC), 1, halfFC);
- *n += fc;
- }
- }
- if (mod>0 && !modAdjOk){ //fsk1
- memset(dest+(*n), 0, mod-(mod/2));
- memset(dest+(*n)+(mod-(mod/2)), 1, mod/2);
- *n += mod;
- }
+ uint8_t *dest = BigBuf_get_addr();
+ uint8_t halfFC = fc/2;
+ uint8_t wavesPerClock = clock/fc;
+ uint8_t mod = clock % fc; //modifier
+ uint8_t modAdj = fc/mod; //how often to apply modifier
+ bool modAdjOk = !(fc % mod); //if (fc % mod==0) modAdjOk=TRUE;
+ // loop through clock - step field clock
+ for (uint8_t idx=0; idx < wavesPerClock; idx++){
+ // put 1/2 FC length 1's and 1/2 0's per field clock wave (to create the wave)
+ memset(dest+(*n), 0, fc-halfFC); //in case of odd number use extra here
+ memset(dest+(*n)+(fc-halfFC), 1, halfFC);
+ *n += fc;
+ }
+ if (mod>0) (*modCnt)++;
+ if ((mod>0) && modAdjOk){ //fsk2
+ if ((*modCnt % modAdj) == 0){ //if 4th 8 length wave in a rf/50 add extra 8 length wave
+ memset(dest+(*n), 0, fc-halfFC);
+ memset(dest+(*n)+(fc-halfFC), 1, halfFC);
+ *n += fc;
+ }
+ }
+ if (mod>0 && !modAdjOk){ //fsk1
+ memset(dest+(*n), 0, mod-(mod/2));
+ memset(dest+(*n)+(mod-(mod/2)), 1, mod/2);
+ *n += mod;
+ }
}
// prepare a waveform pattern in the buffer based on the ID given then
// simulate a HID tag until the button is pressed
void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
{
- int n=0, i=0;
- /*
- HID tag bitstream format
- The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits
- A 1 bit is represented as 6 fc8 and 5 fc10 patterns
- A 0 bit is represented as 5 fc10 and 6 fc8 patterns
- A fc8 is inserted before every 4 bits
- A special start of frame pattern is used consisting a0b0 where a and b are neither 0
- nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10)
- */
-
- if (hi>0xFFF) {
- DbpString("Tags can only have 44 bits. - USE lf simfsk for larger tags");
- return;
- }
- fc(0,&n);
- // special start of frame marker containing invalid bit sequences
- fc(8, &n); fc(8, &n); // invalid
- fc(8, &n); fc(10, &n); // logical 0
- fc(10, &n); fc(10, &n); // invalid
- fc(8, &n); fc(10, &n); // logical 0
-
- WDT_HIT();
- // manchester encode bits 43 to 32
- for (i=11; i>=0; i--) {
- if ((i%4)==3) fc(0,&n);
- if ((hi>>i)&1) {
- fc(10, &n); fc(8, &n); // low-high transition
- } else {
- fc(8, &n); fc(10, &n); // high-low transition
- }
- }
-
- WDT_HIT();
- // manchester encode bits 31 to 0
- for (i=31; i>=0; i--) {
- if ((i%4)==3) fc(0,&n);
- if ((lo>>i)&1) {
- fc(10, &n); fc(8, &n); // low-high transition
- } else {
- fc(8, &n); fc(10, &n); // high-low transition
- }
- }
-
- if (ledcontrol)
- LED_A_ON();
- SimulateTagLowFrequency(n, 0, ledcontrol);
-
- if (ledcontrol)
- LED_A_OFF();
+ int n=0, i=0;
+ /*
+ HID tag bitstream format
+ The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits
+ A 1 bit is represented as 6 fc8 and 5 fc10 patterns
+ A 0 bit is represented as 5 fc10 and 6 fc8 patterns
+ A fc8 is inserted before every 4 bits
+ A special start of frame pattern is used consisting a0b0 where a and b are neither 0
+ nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10)
+ */
+
+ if (hi>0xFFF) {
+ DbpString("Tags can only have 44 bits. - USE lf simfsk for larger tags");
+ return;
+ }
+ fc(0,&n);
+ // special start of frame marker containing invalid bit sequences
+ fc(8, &n); fc(8, &n); // invalid
+ fc(8, &n); fc(10, &n); // logical 0
+ fc(10, &n); fc(10, &n); // invalid
+ fc(8, &n); fc(10, &n); // logical 0
+
+ WDT_HIT();
+ // manchester encode bits 43 to 32
+ for (i=11; i>=0; i--) {
+ if ((i%4)==3) fc(0,&n);
+ if ((hi>>i)&1) {
+ fc(10, &n); fc(8, &n); // low-high transition
+ } else {
+ fc(8, &n); fc(10, &n); // high-low transition
+ }
+ }
+
+ WDT_HIT();
+ // manchester encode bits 31 to 0
+ for (i=31; i>=0; i--) {
+ if ((i%4)==3) fc(0,&n);
+ if ((lo>>i)&1) {
+ fc(10, &n); fc(8, &n); // low-high transition
+ } else {
+ fc(8, &n); fc(10, &n); // high-low transition
+ }
+ }
+
+ if (ledcontrol)
+ LED_A_ON();
+ SimulateTagLowFrequency(n, 0, ledcontrol);
+
+ if (ledcontrol)
+ LED_A_OFF();
}
// prepare a waveform pattern in the buffer based on the ID given then
// arg1 contains fcHigh and fcLow, arg2 contains invert and clock
void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
{
- int ledcontrol=1;
- int n=0, i=0;
- uint8_t fcHigh = arg1 >> 8;
- uint8_t fcLow = arg1 & 0xFF;
- uint16_t modCnt = 0;
- uint8_t clk = arg2 & 0xFF;
- uint8_t invert = (arg2 >> 8) & 1;
-
- for (i=0; i<size; i++){
- if (BitStream[i] == invert){
- fcAll(fcLow, &n, clk, &modCnt);
- } else {
- fcAll(fcHigh, &n, clk, &modCnt);
- }
- }
- Dbprintf("Simulating with fcHigh: %d, fcLow: %d, clk: %d, invert: %d, n: %d",fcHigh, fcLow, clk, invert, n);
- /*Dbprintf("DEBUG: First 32:");
- uint8_t *dest = BigBuf_get_addr();
- i=0;
- Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
- i+=16;
- Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
- */
- if (ledcontrol)
- LED_A_ON();
-
- SimulateTagLowFrequency(n, 0, ledcontrol);
-
- if (ledcontrol)
- LED_A_OFF();
+ int ledcontrol=1;
+ int n=0, i=0;
+ uint8_t fcHigh = arg1 >> 8;
+ uint8_t fcLow = arg1 & 0xFF;
+ uint16_t modCnt = 0;
+ uint8_t clk = arg2 & 0xFF;
+ uint8_t invert = (arg2 >> 8) & 1;
+
+ for (i=0; i<size; i++){
+ if (BitStream[i] == invert){
+ fcAll(fcLow, &n, clk, &modCnt);
+ } else {
+ fcAll(fcHigh, &n, clk, &modCnt);
+ }
+ }
+ Dbprintf("Simulating with fcHigh: %d, fcLow: %d, clk: %d, invert: %d, n: %d",fcHigh, fcLow, clk, invert, n);
+ /*Dbprintf("DEBUG: First 32:");
+ uint8_t *dest = BigBuf_get_addr();
+ i=0;
+ Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+ i+=16;
+ Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+ */
+ if (ledcontrol)
+ LED_A_ON();
+
+ SimulateTagLowFrequency(n, 0, ledcontrol);
+
+ if (ledcontrol)
+ LED_A_OFF();
}
// compose ask waveform for one bit(ASK)
-static void askSimBit(uint8_t c, int *n, uint8_t clock, uint8_t manchester)
+static void askSimBit(uint8_t c, int *n, uint8_t clock, uint8_t manchester)
{
- uint8_t *dest = BigBuf_get_addr();
- uint8_t halfClk = clock/2;
- // c = current bit 1 or 0
- if (manchester==1){
- memset(dest+(*n), c, halfClk);
- memset(dest+(*n) + halfClk, c^1, halfClk);
- } else {
- memset(dest+(*n), c, clock);
- }
- *n += clock;
+ uint8_t *dest = BigBuf_get_addr();
+ uint8_t halfClk = clock/2;
+ // c = current bit 1 or 0
+ if (manchester==1){
+ memset(dest+(*n), c, halfClk);
+ memset(dest+(*n) + halfClk, c^1, halfClk);
+ } else {
+ memset(dest+(*n), c, clock);
+ }
+ *n += clock;
}
static void biphaseSimBit(uint8_t c, int *n, uint8_t clock, uint8_t *phase)
{
- uint8_t *dest = BigBuf_get_addr();
- uint8_t halfClk = clock/2;
- if (c){
- memset(dest+(*n), c ^ 1 ^ *phase, halfClk);
- memset(dest+(*n) + halfClk, c ^ *phase, halfClk);
- } else {
- memset(dest+(*n), c ^ *phase, clock);
- *phase ^= 1;
- }
+ uint8_t *dest = BigBuf_get_addr();
+ uint8_t halfClk = clock/2;
+ if (c){
+ memset(dest+(*n), c ^ 1 ^ *phase, halfClk);
+ memset(dest+(*n) + halfClk, c ^ *phase, halfClk);
+ } else {
+ memset(dest+(*n), c ^ *phase, clock);
+ *phase ^= 1;
+ }
}
// args clock, ask/man or askraw, invert, transmission separator
void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
{
- int ledcontrol = 1;
- int n=0, i=0;
- uint8_t clk = (arg1 >> 8) & 0xFF;
- uint8_t encoding = arg1 & 1;
- uint8_t separator = arg2 & 1;
- uint8_t invert = (arg2 >> 8) & 1;
-
- if (encoding==2){ //biphase
- uint8_t phase=0;
- for (i=0; i<size; i++){
- biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
- }
- if (BitStream[0]==BitStream[size-1]){ //run a second set inverted to keep phase in check
- for (i=0; i<size; i++){
- biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
- }
- }
- } else { // ask/manchester || ask/raw
- for (i=0; i<size; i++){
- askSimBit(BitStream[i]^invert, &n, clk, encoding);
- }
- if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for biphase phase)
- for (i=0; i<size; i++){
- askSimBit(BitStream[i]^invert^1, &n, clk, encoding);
- }
- }
- }
-
- if (separator==1) Dbprintf("sorry but separator option not yet available");
-
- Dbprintf("Simulating with clk: %d, invert: %d, encoding: %d, separator: %d, n: %d",clk, invert, encoding, separator, n);
- //DEBUG
- //Dbprintf("First 32:");
- //uint8_t *dest = BigBuf_get_addr();
- //i=0;
- //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
- //i+=16;
- //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
-
- if (ledcontrol)
- LED_A_ON();
-
- SimulateTagLowFrequency(n, 0, ledcontrol);
-
- if (ledcontrol)
- LED_A_OFF();
+ int ledcontrol = 1;
+ int n=0, i=0;
+ uint8_t clk = (arg1 >> 8) & 0xFF;
+ uint8_t encoding = arg1 & 1;
+ uint8_t separator = arg2 & 1;
+ uint8_t invert = (arg2 >> 8) & 1;
+
+ if (encoding==2){ //biphase
+ uint8_t phase=0;
+ for (i=0; i<size; i++){
+ biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
+ }
+ if (BitStream[0]==BitStream[size-1]){ //run a second set inverted to keep phase in check
+ for (i=0; i<size; i++){
+ biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
+ }
+ }
+ } else { // ask/manchester || ask/raw
+ for (i=0; i<size; i++){
+ askSimBit(BitStream[i]^invert, &n, clk, encoding);
+ }
+ if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for biphase phase)
+ for (i=0; i<size; i++){
+ askSimBit(BitStream[i]^invert^1, &n, clk, encoding);
+ }
+ }
+ }
+
+ if (separator==1) Dbprintf("sorry but separator option not yet available");
+
+ Dbprintf("Simulating with clk: %d, invert: %d, encoding: %d, separator: %d, n: %d",clk, invert, encoding, separator, n);
+ //DEBUG
+ //Dbprintf("First 32:");
+ //uint8_t *dest = BigBuf_get_addr();
+ //i=0;
+ //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+ //i+=16;
+ //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+
+ if (ledcontrol)
+ LED_A_ON();
+
+ SimulateTagLowFrequency(n, 0, ledcontrol);
+
+ if (ledcontrol)
+ LED_A_OFF();
}
//carrier can be 2,4 or 8
static void pskSimBit(uint8_t waveLen, int *n, uint8_t clk, uint8_t *curPhase, bool phaseChg)
{
- uint8_t *dest = BigBuf_get_addr();
- uint8_t halfWave = waveLen/2;
- //uint8_t idx;
- int i = 0;
- if (phaseChg){
- // write phase change
- memset(dest+(*n), *curPhase^1, halfWave);
- memset(dest+(*n) + halfWave, *curPhase, halfWave);
- *n += waveLen;
- *curPhase ^= 1;
- i += waveLen;
- }
- //write each normal clock wave for the clock duration
- for (; i < clk; i+=waveLen){
- memset(dest+(*n), *curPhase, halfWave);
- memset(dest+(*n) + halfWave, *curPhase^1, halfWave);
- *n += waveLen;
- }
+ uint8_t *dest = BigBuf_get_addr();
+ uint8_t halfWave = waveLen/2;
+ //uint8_t idx;
+ int i = 0;
+ if (phaseChg){
+ // write phase change
+ memset(dest+(*n), *curPhase^1, halfWave);
+ memset(dest+(*n) + halfWave, *curPhase, halfWave);
+ *n += waveLen;
+ *curPhase ^= 1;
+ i += waveLen;
+ }
+ //write each normal clock wave for the clock duration
+ for (; i < clk; i+=waveLen){
+ memset(dest+(*n), *curPhase, halfWave);
+ memset(dest+(*n) + halfWave, *curPhase^1, halfWave);
+ *n += waveLen;
+ }
}
// args clock, carrier, invert,
void CmdPSKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
{
- int ledcontrol=1;
- int n=0, i=0;
- uint8_t clk = arg1 >> 8;
- uint8_t carrier = arg1 & 0xFF;
- uint8_t invert = arg2 & 0xFF;
- uint8_t curPhase = 0;
- for (i=0; i<size; i++){
- if (BitStream[i] == curPhase){
- pskSimBit(carrier, &n, clk, &curPhase, FALSE);
- } else {
- pskSimBit(carrier, &n, clk, &curPhase, TRUE);
- }
- }
- Dbprintf("Simulating with Carrier: %d, clk: %d, invert: %d, n: %d",carrier, clk, invert, n);
- //Dbprintf("DEBUG: First 32:");
- //uint8_t *dest = BigBuf_get_addr();
- //i=0;
- //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
- //i+=16;
- //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
-
- if (ledcontrol)
- LED_A_ON();
- SimulateTagLowFrequency(n, 0, ledcontrol);
-
- if (ledcontrol)
- LED_A_OFF();
+ int ledcontrol=1;
+ int n=0, i=0;
+ uint8_t clk = arg1 >> 8;
+ uint8_t carrier = arg1 & 0xFF;
+ uint8_t invert = arg2 & 0xFF;
+ uint8_t curPhase = 0;
+ for (i=0; i<size; i++){
+ if (BitStream[i] == curPhase){
+ pskSimBit(carrier, &n, clk, &curPhase, FALSE);
+ } else {
+ pskSimBit(carrier, &n, clk, &curPhase, TRUE);
+ }
+ }
+ Dbprintf("Simulating with Carrier: %d, clk: %d, invert: %d, n: %d",carrier, clk, invert, n);
+ //Dbprintf("DEBUG: First 32:");
+ //uint8_t *dest = BigBuf_get_addr();
+ //i=0;
+ //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+ //i+=16;
+ //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+
+ if (ledcontrol)
+ LED_A_ON();
+ SimulateTagLowFrequency(n, 0, ledcontrol);
+
+ if (ledcontrol)
+ LED_A_OFF();
}
// loop to get raw HID waveform then FSK demodulate the TAG ID from it
void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
{
- uint8_t *dest = BigBuf_get_addr();
- const size_t sizeOfBigBuff = BigBuf_max_traceLen();
- size_t size = 0;
- uint32_t hi2=0, hi=0, lo=0;
- int idx=0;
- // Configure to go in 125Khz listen mode
- LFSetupFPGAForADC(95, true);
+ uint8_t *dest = BigBuf_get_addr();
+ const size_t sizeOfBigBuff = BigBuf_max_traceLen();
+ size_t size = 0;
+ uint32_t hi2=0, hi=0, lo=0;
+ int idx=0;
+ // Configure to go in 125Khz listen mode
+ LFSetupFPGAForADC(95, true);
- while(!BUTTON_PRESS()) {
+ while(!BUTTON_PRESS()) {
- WDT_HIT();
- if (ledcontrol) LED_A_ON();
+ WDT_HIT();
+ if (ledcontrol) LED_A_ON();
DoAcquisition_default(-1,true);
// FSK demodulator
- size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use
+ size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use
idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
-
+
if (idx>0 && lo>0){
- // final loop, go over previously decoded manchester data and decode into usable tag ID
- // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
- if (hi2 != 0){ //extra large HID tags
- Dbprintf("TAG ID: %x%08x%08x (%d)",
- (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
- }else { //standard HID tags <38 bits
- //Dbprintf("TAG ID: %x%08x (%d)",(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); //old print cmd
- uint8_t bitlen = 0;
- uint32_t fc = 0;
- uint32_t cardnum = 0;
+ // final loop, go over previously decoded manchester data and decode into usable tag ID
+ // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
+ if (hi2 != 0){ //extra large HID tags
+ Dbprintf("TAG ID: %x%08x%08x (%d)",
+ (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+ }else { //standard HID tags <38 bits
+ //Dbprintf("TAG ID: %x%08x (%d)",(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); //old print cmd
+ uint8_t bitlen = 0;
+ uint32_t fc = 0;
+ uint32_t cardnum = 0;
if (((hi>>5)&1) == 1){//if bit 38 is set then < 37 bit format is used
- uint32_t lo2=0;
- lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit
- uint8_t idx3 = 1;
+ uint32_t lo2=0;
+ lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit
+ uint8_t idx3 = 1;
while(lo2 > 1){ //find last bit set to 1 (format len bit)
lo2=lo2 >> 1;
- idx3++;
- }
+ idx3++;
+ }
bitlen = idx3+19;
- fc =0;
- cardnum=0;
+ fc =0;
+ cardnum=0;
if(bitlen == 26){
- cardnum = (lo>>1)&0xFFFF;
- fc = (lo>>17)&0xFF;
- }
+ cardnum = (lo>>1)&0xFFFF;
+ fc = (lo>>17)&0xFF;
+ }
if(bitlen == 37){
- cardnum = (lo>>1)&0x7FFFF;
- fc = ((hi&0xF)<<12)|(lo>>20);
- }
+ cardnum = (lo>>1)&0x7FFFF;
+ fc = ((hi&0xF)<<12)|(lo>>20);
+ }
if(bitlen == 34){
- cardnum = (lo>>1)&0xFFFF;
- fc= ((hi&1)<<15)|(lo>>17);
- }
+ cardnum = (lo>>1)&0xFFFF;
+ fc= ((hi&1)<<15)|(lo>>17);
+ }
if(bitlen == 35){
- cardnum = (lo>>1)&0xFFFFF;
- fc = ((hi&1)<<11)|(lo>>21);
- }
- }
- else { //if bit 38 is not set then 37 bit format is used
- bitlen= 37;
- fc =0;
- cardnum=0;
- if(bitlen==37){
- cardnum = (lo>>1)&0x7FFFF;
- fc = ((hi&0xF)<<12)|(lo>>20);
- }
- }
- //Dbprintf("TAG ID: %x%08x (%d)",
- // (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
- Dbprintf("TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
- (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
- (unsigned int) bitlen, (unsigned int) fc, (unsigned int) cardnum);
- }
- if (findone){
- if (ledcontrol) LED_A_OFF();
- *high = hi;
- *low = lo;
- return;
- }
- // reset
- hi2 = hi = lo = 0;
- }
- WDT_HIT();
- }
- DbpString("Stopped");
- if (ledcontrol) LED_A_OFF();
+ cardnum = (lo>>1)&0xFFFFF;
+ fc = ((hi&1)<<11)|(lo>>21);
+ }
+ }
+ else { //if bit 38 is not set then 37 bit format is used
+ bitlen= 37;
+ fc =0;
+ cardnum=0;
+ if(bitlen==37){
+ cardnum = (lo>>1)&0x7FFFF;
+ fc = ((hi&0xF)<<12)|(lo>>20);
+ }
+ }
+ //Dbprintf("TAG ID: %x%08x (%d)",
+ // (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+ Dbprintf("TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
+ (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
+ (unsigned int) bitlen, (unsigned int) fc, (unsigned int) cardnum);
+ }
+ if (findone){
+ if (ledcontrol) LED_A_OFF();
+ *high = hi;
+ *low = lo;
+ return;
+ }
+ // reset
+ hi2 = hi = lo = 0;
+ }
+ WDT_HIT();
+ }
+ DbpString("Stopped");
+ if (ledcontrol) LED_A_OFF();
}
void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
{
- uint8_t *dest = BigBuf_get_addr();
-
- size_t size=0, idx=0;
- int clk=0, invert=0, errCnt=0, maxErr=20;
- uint32_t hi=0;
- uint64_t lo=0;
- // Configure to go in 125Khz listen mode
- LFSetupFPGAForADC(95, true);
-
- while(!BUTTON_PRESS()) {
-
- WDT_HIT();
- if (ledcontrol) LED_A_ON();
-
- DoAcquisition_default(-1,true);
- size = BigBuf_max_traceLen();
- //Dbprintf("DEBUG: Buffer got");
- //askdemod and manchester decode
- errCnt = askmandemod(dest, &size, &clk, &invert, maxErr);
- //Dbprintf("DEBUG: ASK Got");
- WDT_HIT();
-
- if (errCnt>=0){
- errCnt = Em410xDecode(dest, &size, &idx, &hi, &lo);
- //Dbprintf("DEBUG: EM GOT");
- if (errCnt){
- if (size>64){
- Dbprintf("EM XL TAG ID: %06x%08x%08x - (%05d_%03d_%08d)",
- hi,
- (uint32_t)(lo>>32),
- (uint32_t)lo,
- (uint32_t)(lo&0xFFFF),
- (uint32_t)((lo>>16LL) & 0xFF),
- (uint32_t)(lo & 0xFFFFFF));
- } else {
- Dbprintf("EM TAG ID: %02x%08x - (%05d_%03d_%08d)",
- (uint32_t)(lo>>32),
- (uint32_t)lo,
- (uint32_t)(lo&0xFFFF),
- (uint32_t)((lo>>16LL) & 0xFF),
- (uint32_t)(lo & 0xFFFFFF));
- }
- }
- if (findone){
- if (ledcontrol) LED_A_OFF();
- *high=lo>>32;
- *low=lo & 0xFFFFFFFF;
- return;
- }
- } else{
- //Dbprintf("DEBUG: No Tag");
- }
- WDT_HIT();
- hi = 0;
- lo = 0;
- clk=0;
- invert=0;
- errCnt=0;
- size=0;
- }
- DbpString("Stopped");
- if (ledcontrol) LED_A_OFF();
+ uint8_t *dest = BigBuf_get_addr();
+
+ size_t size=0, idx=0;
+ int clk=0, invert=0, errCnt=0, maxErr=20;
+ uint32_t hi=0;
+ uint64_t lo=0;
+ // Configure to go in 125Khz listen mode
+ LFSetupFPGAForADC(95, true);
+
+ while(!BUTTON_PRESS()) {
+
+ WDT_HIT();
+ if (ledcontrol) LED_A_ON();
+
+ DoAcquisition_default(-1,true);
+ size = BigBuf_max_traceLen();
+ //Dbprintf("DEBUG: Buffer got");
+ //askdemod and manchester decode
+ errCnt = askmandemod(dest, &size, &clk, &invert, maxErr);
+ //Dbprintf("DEBUG: ASK Got");
+ WDT_HIT();
+
+ if (errCnt>=0){
+ errCnt = Em410xDecode(dest, &size, &idx, &hi, &lo);
+ //Dbprintf("DEBUG: EM GOT");
+ if (errCnt){
+ if (size>64){
+ Dbprintf("EM XL TAG ID: %06x%08x%08x - (%05d_%03d_%08d)",
+ hi,
+ (uint32_t)(lo>>32),
+ (uint32_t)lo,
+ (uint32_t)(lo&0xFFFF),
+ (uint32_t)((lo>>16LL) & 0xFF),
+ (uint32_t)(lo & 0xFFFFFF));
+ } else {
+ Dbprintf("EM TAG ID: %02x%08x - (%05d_%03d_%08d)",
+ (uint32_t)(lo>>32),
+ (uint32_t)lo,
+ (uint32_t)(lo&0xFFFF),
+ (uint32_t)((lo>>16LL) & 0xFF),
+ (uint32_t)(lo & 0xFFFFFF));
+ }
+ }
+ if (findone){
+ if (ledcontrol) LED_A_OFF();
+ *high=lo>>32;
+ *low=lo & 0xFFFFFFFF;
+ return;
+ }
+ } else{
+ //Dbprintf("DEBUG: No Tag");
+ }
+ WDT_HIT();
+ hi = 0;
+ lo = 0;
+ clk=0;
+ invert=0;
+ errCnt=0;
+ size=0;
+ }
+ DbpString("Stopped");
+ if (ledcontrol) LED_A_OFF();
}
void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
{
- uint8_t *dest = BigBuf_get_addr();
- int idx=0;
- uint32_t code=0, code2=0;
- uint8_t version=0;
- uint8_t facilitycode=0;
- uint16_t number=0;
- // Configure to go in 125Khz listen mode
- LFSetupFPGAForADC(95, true);
-
- while(!BUTTON_PRESS()) {
- WDT_HIT();
- if (ledcontrol) LED_A_ON();
+ uint8_t *dest = BigBuf_get_addr();
+ int idx=0;
+ uint32_t code=0, code2=0;
+ uint8_t version=0;
+ uint8_t facilitycode=0;
+ uint16_t number=0;
+ // Configure to go in 125Khz listen mode
+ LFSetupFPGAForADC(95, true);
+
+ while(!BUTTON_PRESS()) {
+ WDT_HIT();
+ if (ledcontrol) LED_A_ON();
DoAcquisition_default(-1,true);
//fskdemod and get start index
- WDT_HIT();
- idx = IOdemodFSK(dest, BigBuf_max_traceLen());
- if (idx>0){
- //valid tag found
-
- //Index map
- //0 10 20 30 40 50 60
- //| | | | | | |
- //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
- //-----------------------------------------------------------------------------
- //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
- //
- //XSF(version)facility:codeone+codetwo
- //Handle the data
- if(findone){ //only print binary if we are doing one
- Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx], dest[idx+1], dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]);
- Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]);
- Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]);
- Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]);
- Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]);
- Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]);
- Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]);
- }
- code = bytebits_to_byte(dest+idx,32);
- code2 = bytebits_to_byte(dest+idx+32,32);
- version = bytebits_to_byte(dest+idx+27,8); //14,4
- facilitycode = bytebits_to_byte(dest+idx+18,8) ;
- number = (bytebits_to_byte(dest+idx+36,8)<<8)|(bytebits_to_byte(dest+idx+45,8)); //36,9
-
- Dbprintf("XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2);
- // if we're only looking for one tag
- if (findone){
- if (ledcontrol) LED_A_OFF();
- //LED_A_OFF();
- *high=code;
- *low=code2;
- return;
- }
- code=code2=0;
- version=facilitycode=0;
- number=0;
- idx=0;
- }
- WDT_HIT();
- }
- DbpString("Stopped");
- if (ledcontrol) LED_A_OFF();
+ WDT_HIT();
+ idx = IOdemodFSK(dest, BigBuf_max_traceLen());
+ if (idx>0){
+ //valid tag found
+
+ //Index map
+ //0 10 20 30 40 50 60
+ //| | | | | | |
+ //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
+ //-----------------------------------------------------------------------------
+ //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
+ //
+ //XSF(version)facility:codeone+codetwo
+ //Handle the data
+ if(findone){ //only print binary if we are doing one
+ Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx], dest[idx+1], dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]);
+ Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]);
+ Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]);
+ Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]);
+ Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]);
+ Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]);
+ Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]);
+ }
+ code = bytebits_to_byte(dest+idx,32);
+ code2 = bytebits_to_byte(dest+idx+32,32);
+ version = bytebits_to_byte(dest+idx+27,8); //14,4
+ facilitycode = bytebits_to_byte(dest+idx+18,8) ;
+ number = (bytebits_to_byte(dest+idx+36,8)<<8)|(bytebits_to_byte(dest+idx+45,8)); //36,9
+
+ Dbprintf("XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2);
+ // if we're only looking for one tag
+ if (findone){
+ if (ledcontrol) LED_A_OFF();
+ //LED_A_OFF();
+ *high=code;
+ *low=code2;
+ return;
+ }
+ code=code2=0;
+ version=facilitycode=0;
+ number=0;
+ idx=0;
+ }
+ WDT_HIT();
+ }
+ DbpString("Stopped");
+ if (ledcontrol) LED_A_OFF();
}
/*------------------------------
// Write one bit to card
void T55xxWriteBit(int bit)
{
- FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
- if (bit == 0)
- SpinDelayUs(WRITE_0);
- else
- SpinDelayUs(WRITE_1);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- SpinDelayUs(WRITE_GAP);
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+ if (bit == 0)
+ SpinDelayUs(WRITE_0);
+ else
+ SpinDelayUs(WRITE_1);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelayUs(WRITE_GAP);
}
// Write one card block in page 0, no lock
void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
{
- uint32_t i = 0;
-
- // Set up FPGA, 125kHz
- // Wait for config.. (192+8190xPOW)x8 == 67ms
- LFSetupFPGAForADC(0, true);
-
- // Now start writting
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- SpinDelayUs(START_GAP);
-
- // Opcode
- T55xxWriteBit(1);
- T55xxWriteBit(0); //Page 0
- if (PwdMode == 1){
- // Pwd
- for (i = 0x80000000; i != 0; i >>= 1)
- T55xxWriteBit(Pwd & i);
- }
- // Lock bit
- T55xxWriteBit(0);
-
- // Data
- for (i = 0x80000000; i != 0; i >>= 1)
- T55xxWriteBit(Data & i);
-
- // Block
- for (i = 0x04; i != 0; i >>= 1)
- T55xxWriteBit(Block & i);
-
- // Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
- // so wait a little more)
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
- SpinDelay(20);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ uint32_t i = 0;
+
+ // Set up FPGA, 125kHz
+ // Wait for config.. (192+8190xPOW)x8 == 67ms
+ LFSetupFPGAForADC(0, true);
+
+ // Now start writting
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelayUs(START_GAP);
+
+ // Opcode
+ T55xxWriteBit(1);
+ T55xxWriteBit(0); //Page 0
+ if (PwdMode == 1){
+ // Pwd
+ for (i = 0x80000000; i != 0; i >>= 1)
+ T55xxWriteBit(Pwd & i);
+ }
+ // Lock bit
+ T55xxWriteBit(0);
+
+ // Data
+ for (i = 0x80000000; i != 0; i >>= 1)
+ T55xxWriteBit(Data & i);
+
+ // Block
+ for (i = 0x04; i != 0; i >>= 1)
+ T55xxWriteBit(Block & i);
+
+ // Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
+ // so wait a little more)
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+ SpinDelay(20);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
}
void TurnReadLFOn(){
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
- // Give it a bit of time for the resonant antenna to settle.
- SpinDelayUs(8*150);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+ // Give it a bit of time for the resonant antenna to settle.
+ SpinDelayUs(8*150);
}
// Read one card block in page 0
void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
{
- uint32_t i = 0;
- uint8_t *dest = BigBuf_get_addr();
- uint16_t bufferlength = BigBuf_max_traceLen();
- if ( bufferlength > T55xx_SAMPLES_SIZE )
- bufferlength = T55xx_SAMPLES_SIZE;
-
- // Clear destination buffer before sending the command
- memset(dest, 0x80, bufferlength);
-
- // Set up FPGA, 125kHz
- // Wait for config.. (192+8190xPOW)x8 == 67ms
- LFSetupFPGAForADC(0, true);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- SpinDelayUs(START_GAP);
-
- // Opcode
- T55xxWriteBit(1);
- T55xxWriteBit(0); //Page 0
- if (PwdMode == 1){
- // Pwd
- for (i = 0x80000000; i != 0; i >>= 1)
- T55xxWriteBit(Pwd & i);
- }
- // Lock bit
- T55xxWriteBit(0);
- // Block
- for (i = 0x04; i != 0; i >>= 1)
- T55xxWriteBit(Block & i);
-
- // Turn field on to read the response
- TurnReadLFOn();
- // Now do the acquisition
- i = 0;
- for(;;) {
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
- AT91C_BASE_SSC->SSC_THR = 0x43;
- LED_D_ON();
- }
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
- dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
- i++;
- LED_D_OFF();
- if (i >= bufferlength) break;
- }
- }
-
- cmd_send(CMD_ACK,0,0,0,0,0);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
- LED_D_OFF();
+ uint32_t i = 0;
+ uint8_t *dest = BigBuf_get_addr();
+ uint16_t bufferlength = BigBuf_max_traceLen();
+ if ( bufferlength > T55xx_SAMPLES_SIZE )
+ bufferlength = T55xx_SAMPLES_SIZE;
+
+ // Clear destination buffer before sending the command
+ memset(dest, 0x80, bufferlength);
+
+ // Set up FPGA, 125kHz
+ // Wait for config.. (192+8190xPOW)x8 == 67ms
+ LFSetupFPGAForADC(0, true);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelayUs(START_GAP);
+
+ // Opcode
+ T55xxWriteBit(1);
+ T55xxWriteBit(0); //Page 0
+ if (PwdMode == 1){
+ // Pwd
+ for (i = 0x80000000; i != 0; i >>= 1)
+ T55xxWriteBit(Pwd & i);
+ }
+ // Lock bit
+ T55xxWriteBit(0);
+ // Block
+ for (i = 0x04; i != 0; i >>= 1)
+ T55xxWriteBit(Block & i);
+
+ // Turn field on to read the response
+ TurnReadLFOn();
+ // Now do the acquisition
+ i = 0;
+ for(;;) {
+ if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
+ AT91C_BASE_SSC->SSC_THR = 0x43;
+ LED_D_ON();
+ }
+ if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+ dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+ i++;
+ LED_D_OFF();
+ if (i >= bufferlength) break;
+ }
+ }
+
+ cmd_send(CMD_ACK,0,0,0,0,0);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ LED_D_OFF();
}
// Read card traceability data (page 1)
void T55xxReadTrace(void){
-
- uint32_t i = 0;
- uint8_t *dest = BigBuf_get_addr();
- uint16_t bufferlength = BigBuf_max_traceLen();
- if ( bufferlength > T55xx_SAMPLES_SIZE )
- bufferlength= T55xx_SAMPLES_SIZE;
-
- // Clear destination buffer before sending the command
- memset(dest, 0x80, bufferlength);
-
- LFSetupFPGAForADC(0, true);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- SpinDelayUs(START_GAP);
-
- // Opcode
- T55xxWriteBit(1);
- T55xxWriteBit(1); //Page 1
-
- // Turn field on to read the response
- TurnReadLFOn();
-
- // Now do the acquisition
- for(;;) {
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
- AT91C_BASE_SSC->SSC_THR = 0x43;
- LED_D_ON();
- }
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
- dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
- i++;
- LED_D_OFF();
-
- if (i >= bufferlength) break;
- }
- }
-
- cmd_send(CMD_ACK,0,0,0,0,0);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
- LED_D_OFF();
+
+ uint32_t i = 0;
+ uint8_t *dest = BigBuf_get_addr();
+ uint16_t bufferlength = BigBuf_max_traceLen();
+ if ( bufferlength > T55xx_SAMPLES_SIZE )
+ bufferlength= T55xx_SAMPLES_SIZE;
+
+ // Clear destination buffer before sending the command
+ memset(dest, 0x80, bufferlength);
+
+ LFSetupFPGAForADC(0, true);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelayUs(START_GAP);
+
+ // Opcode
+ T55xxWriteBit(1);
+ T55xxWriteBit(1); //Page 1
+
+ // Turn field on to read the response
+ TurnReadLFOn();
+
+ // Now do the acquisition
+ for(;;) {
+ if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
+ AT91C_BASE_SSC->SSC_THR = 0x43;
+ LED_D_ON();
+ }
+ if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+ dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+ i++;
+ LED_D_OFF();
+
+ if (i >= bufferlength) break;
+ }
+ }
+
+ cmd_send(CMD_ACK,0,0,0,0,0);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ LED_D_OFF();
}
/*-------------- Cloning routines -----------*/
// Copy HID id to card and setup block 0 config
void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
{
- int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format
- int last_block = 0;
-
- if (longFMT){
- // Ensure no more than 84 bits supplied
- if (hi2>0xFFFFF) {
- DbpString("Tags can only have 84 bits.");
- return;
- }
- // Build the 6 data blocks for supplied 84bit ID
- last_block = 6;
- data1 = 0x1D96A900; // load preamble (1D) & long format identifier (9E manchester encoded)
- for (int i=0;i<4;i++) {
- if (hi2 & (1<<(19-i)))
- data1 |= (1<<(((3-i)*2)+1)); // 1 -> 10
- else
- data1 |= (1<<((3-i)*2)); // 0 -> 01
- }
-
- data2 = 0;
- for (int i=0;i<16;i++) {
- if (hi2 & (1<<(15-i)))
- data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
- else
- data2 |= (1<<((15-i)*2)); // 0 -> 01
- }
-
- data3 = 0;
- for (int i=0;i<16;i++) {
- if (hi & (1<<(31-i)))
- data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
- else
- data3 |= (1<<((15-i)*2)); // 0 -> 01
- }
-
- data4 = 0;
- for (int i=0;i<16;i++) {
- if (hi & (1<<(15-i)))
- data4 |= (1<<(((15-i)*2)+1)); // 1 -> 10
- else
- data4 |= (1<<((15-i)*2)); // 0 -> 01
- }
-
- data5 = 0;
- for (int i=0;i<16;i++) {
- if (lo & (1<<(31-i)))
- data5 |= (1<<(((15-i)*2)+1)); // 1 -> 10
- else
- data5 |= (1<<((15-i)*2)); // 0 -> 01
- }
-
- data6 = 0;
- for (int i=0;i<16;i++) {
- if (lo & (1<<(15-i)))
- data6 |= (1<<(((15-i)*2)+1)); // 1 -> 10
- else
- data6 |= (1<<((15-i)*2)); // 0 -> 01
- }
- }
- else {
- // Ensure no more than 44 bits supplied
- if (hi>0xFFF) {
- DbpString("Tags can only have 44 bits.");
- return;
- }
-
- // Build the 3 data blocks for supplied 44bit ID
- last_block = 3;
-
- data1 = 0x1D000000; // load preamble
-
- for (int i=0;i<12;i++) {
- if (hi & (1<<(11-i)))
- data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10
- else
- data1 |= (1<<((11-i)*2)); // 0 -> 01
- }
-
- data2 = 0;
- for (int i=0;i<16;i++) {
- if (lo & (1<<(31-i)))
- data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
- else
- data2 |= (1<<((15-i)*2)); // 0 -> 01
- }
-
- data3 = 0;
- for (int i=0;i<16;i++) {
- if (lo & (1<<(15-i)))
- data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
- else
- data3 |= (1<<((15-i)*2)); // 0 -> 01
- }
- }
-
- LED_D_ON();
- // Program the data blocks for supplied ID
- // and the block 0 for HID format
- T55xxWriteBlock(data1,1,0,0);
- T55xxWriteBlock(data2,2,0,0);
- T55xxWriteBlock(data3,3,0,0);
-
- if (longFMT) { // if long format there are 6 blocks
- T55xxWriteBlock(data4,4,0,0);
- T55xxWriteBlock(data5,5,0,0);
- T55xxWriteBlock(data6,6,0,0);
- }
-
- // Config for HID (RF/50, FSK2a, Maxblock=3 for short/6 for long)
- T55xxWriteBlock(T55x7_BITRATE_RF_50 |
- T55x7_MODULATION_FSK2a |
- last_block << T55x7_MAXBLOCK_SHIFT,
- 0,0,0);
-
- LED_D_OFF();
-
- DbpString("DONE!");
+ int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format
+ int last_block = 0;
+
+ if (longFMT){
+ // Ensure no more than 84 bits supplied
+ if (hi2>0xFFFFF) {
+ DbpString("Tags can only have 84 bits.");
+ return;
+ }
+ // Build the 6 data blocks for supplied 84bit ID
+ last_block = 6;
+ data1 = 0x1D96A900; // load preamble (1D) & long format identifier (9E manchester encoded)
+ for (int i=0;i<4;i++) {
+ if (hi2 & (1<<(19-i)))
+ data1 |= (1<<(((3-i)*2)+1)); // 1 -> 10
+ else
+ data1 |= (1<<((3-i)*2)); // 0 -> 01
+ }
+
+ data2 = 0;
+ for (int i=0;i<16;i++) {
+ if (hi2 & (1<<(15-i)))
+ data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+ else
+ data2 |= (1<<((15-i)*2)); // 0 -> 01
+ }
+
+ data3 = 0;
+ for (int i=0;i<16;i++) {
+ if (hi & (1<<(31-i)))
+ data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+ else
+ data3 |= (1<<((15-i)*2)); // 0 -> 01
+ }
+
+ data4 = 0;
+ for (int i=0;i<16;i++) {
+ if (hi & (1<<(15-i)))
+ data4 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+ else
+ data4 |= (1<<((15-i)*2)); // 0 -> 01
+ }
+
+ data5 = 0;
+ for (int i=0;i<16;i++) {
+ if (lo & (1<<(31-i)))
+ data5 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+ else
+ data5 |= (1<<((15-i)*2)); // 0 -> 01
+ }
+
+ data6 = 0;
+ for (int i=0;i<16;i++) {
+ if (lo & (1<<(15-i)))
+ data6 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+ else
+ data6 |= (1<<((15-i)*2)); // 0 -> 01
+ }
+ }
+ else {
+ // Ensure no more than 44 bits supplied
+ if (hi>0xFFF) {
+ DbpString("Tags can only have 44 bits.");
+ return;
+ }
+
+ // Build the 3 data blocks for supplied 44bit ID
+ last_block = 3;
+
+ data1 = 0x1D000000; // load preamble
+
+ for (int i=0;i<12;i++) {
+ if (hi & (1<<(11-i)))
+ data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10
+ else
+ data1 |= (1<<((11-i)*2)); // 0 -> 01
+ }
+
+ data2 = 0;
+ for (int i=0;i<16;i++) {
+ if (lo & (1<<(31-i)))
+ data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+ else
+ data2 |= (1<<((15-i)*2)); // 0 -> 01
+ }
+
+ data3 = 0;
+ for (int i=0;i<16;i++) {
+ if (lo & (1<<(15-i)))
+ data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
+ else
+ data3 |= (1<<((15-i)*2)); // 0 -> 01
+ }
+ }
+
+ LED_D_ON();
+ // Program the data blocks for supplied ID
+ // and the block 0 for HID format
+ T55xxWriteBlock(data1,1,0,0);
+ T55xxWriteBlock(data2,2,0,0);
+ T55xxWriteBlock(data3,3,0,0);
+
+ if (longFMT) { // if long format there are 6 blocks
+ T55xxWriteBlock(data4,4,0,0);
+ T55xxWriteBlock(data5,5,0,0);
+ T55xxWriteBlock(data6,6,0,0);
+ }
+
+ // Config for HID (RF/50, FSK2a, Maxblock=3 for short/6 for long)
+ T55xxWriteBlock(T55x7_BITRATE_RF_50 |
+ T55x7_MODULATION_FSK2a |
+ last_block << T55x7_MAXBLOCK_SHIFT,
+ 0,0,0);
+
+ LED_D_OFF();
+
+ DbpString("DONE!");
}
void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT)
{
- int data1=0, data2=0; //up to six blocks for long format
+ int data1=0, data2=0; //up to six blocks for long format
- data1 = hi; // load preamble
- data2 = lo;
+ data1 = hi; // load preamble
+ data2 = lo;
- LED_D_ON();
- // Program the data blocks for supplied ID
- // and the block 0 for HID format
- T55xxWriteBlock(data1,1,0,0);
- T55xxWriteBlock(data2,2,0,0);
+ LED_D_ON();
+ // Program the data blocks for supplied ID
+ // and the block 0 for HID format
+ T55xxWriteBlock(data1,1,0,0);
+ T55xxWriteBlock(data2,2,0,0);
- //Config Block
- T55xxWriteBlock(0x00147040,0,0,0);
- LED_D_OFF();
+ //Config Block
+ T55xxWriteBlock(0x00147040,0,0,0);
+ LED_D_OFF();
- DbpString("DONE!");
+ DbpString("DONE!");
}
// Define 9bit header for EM410x tags
void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo)
{
- int i, id_bit;
- uint64_t id = EM410X_HEADER;
- uint64_t rev_id = 0; // reversed ID
- int c_parity[4]; // column parity
- int r_parity = 0; // row parity
- uint32_t clock = 0;
-
- // Reverse ID bits given as parameter (for simpler operations)
- for (i = 0; i < EM410X_ID_LENGTH; ++i) {
- if (i < 32) {
- rev_id = (rev_id << 1) | (id_lo & 1);
- id_lo >>= 1;
- } else {
- rev_id = (rev_id << 1) | (id_hi & 1);
- id_hi >>= 1;
- }
- }
-
- for (i = 0; i < EM410X_ID_LENGTH; ++i) {
- id_bit = rev_id & 1;
-
- if (i % 4 == 0) {
- // Don't write row parity bit at start of parsing
- if (i)
- id = (id << 1) | r_parity;
- // Start counting parity for new row
- r_parity = id_bit;
- } else {
- // Count row parity
- r_parity ^= id_bit;
- }
-
- // First elements in column?
- if (i < 4)
- // Fill out first elements
- c_parity[i] = id_bit;
- else
- // Count column parity
- c_parity[i % 4] ^= id_bit;
-
- // Insert ID bit
- id = (id << 1) | id_bit;
- rev_id >>= 1;
- }
-
- // Insert parity bit of last row
- id = (id << 1) | r_parity;
-
- // Fill out column parity at the end of tag
- for (i = 0; i < 4; ++i)
- id = (id << 1) | c_parity[i];
-
- // Add stop bit
- id <<= 1;
-
- Dbprintf("Started writing %s tag ...", card ? "T55x7":"T5555");
- LED_D_ON();
-
- // Write EM410x ID
- T55xxWriteBlock((uint32_t)(id >> 32), 1, 0, 0);
- T55xxWriteBlock((uint32_t)id, 2, 0, 0);
-
- // Config for EM410x (RF/64, Manchester, Maxblock=2)
- if (card) {
- // Clock rate is stored in bits 8-15 of the card value
- clock = (card & 0xFF00) >> 8;
- Dbprintf("Clock rate: %d", clock);
- switch (clock)
- {
- case 32:
- clock = T55x7_BITRATE_RF_32;
- break;
- case 16:
- clock = T55x7_BITRATE_RF_16;
- break;
- case 0:
- // A value of 0 is assumed to be 64 for backwards-compatibility
- // Fall through...
- case 64:
- clock = T55x7_BITRATE_RF_64;
- break;
- default:
- Dbprintf("Invalid clock rate: %d", clock);
- return;
- }
-
- // Writing configuration for T55x7 tag
- T55xxWriteBlock(clock |
- T55x7_MODULATION_MANCHESTER |
- 2 << T55x7_MAXBLOCK_SHIFT,
- 0, 0, 0);
- }
- else
- // Writing configuration for T5555(Q5) tag
- T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT |
- T5555_MODULATION_MANCHESTER |
- 2 << T5555_MAXBLOCK_SHIFT,
- 0, 0, 0);
-
- LED_D_OFF();
- Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555",
- (uint32_t)(id >> 32), (uint32_t)id);
+ int i, id_bit;
+ uint64_t id = EM410X_HEADER;
+ uint64_t rev_id = 0; // reversed ID
+ int c_parity[4]; // column parity
+ int r_parity = 0; // row parity
+ uint32_t clock = 0;
+
+ // Reverse ID bits given as parameter (for simpler operations)
+ for (i = 0; i < EM410X_ID_LENGTH; ++i) {
+ if (i < 32) {
+ rev_id = (rev_id << 1) | (id_lo & 1);
+ id_lo >>= 1;
+ } else {
+ rev_id = (rev_id << 1) | (id_hi & 1);
+ id_hi >>= 1;
+ }
+ }
+
+ for (i = 0; i < EM410X_ID_LENGTH; ++i) {
+ id_bit = rev_id & 1;
+
+ if (i % 4 == 0) {
+ // Don't write row parity bit at start of parsing
+ if (i)
+ id = (id << 1) | r_parity;
+ // Start counting parity for new row
+ r_parity = id_bit;
+ } else {
+ // Count row parity
+ r_parity ^= id_bit;
+ }
+
+ // First elements in column?
+ if (i < 4)
+ // Fill out first elements
+ c_parity[i] = id_bit;
+ else
+ // Count column parity
+ c_parity[i % 4] ^= id_bit;
+
+ // Insert ID bit
+ id = (id << 1) | id_bit;
+ rev_id >>= 1;
+ }
+
+ // Insert parity bit of last row
+ id = (id << 1) | r_parity;
+
+ // Fill out column parity at the end of tag
+ for (i = 0; i < 4; ++i)
+ id = (id << 1) | c_parity[i];
+
+ // Add stop bit
+ id <<= 1;
+
+ Dbprintf("Started writing %s tag ...", card ? "T55x7":"T5555");
+ LED_D_ON();
+
+ // Write EM410x ID
+ T55xxWriteBlock((uint32_t)(id >> 32), 1, 0, 0);
+ T55xxWriteBlock((uint32_t)id, 2, 0, 0);
+
+ // Config for EM410x (RF/64, Manchester, Maxblock=2)
+ if (card) {
+ // Clock rate is stored in bits 8-15 of the card value
+ clock = (card & 0xFF00) >> 8;
+ Dbprintf("Clock rate: %d", clock);
+ switch (clock)
+ {
+ case 32:
+ clock = T55x7_BITRATE_RF_32;
+ break;
+ case 16:
+ clock = T55x7_BITRATE_RF_16;
+ break;
+ case 0:
+ // A value of 0 is assumed to be 64 for backwards-compatibility
+ // Fall through...
+ case 64:
+ clock = T55x7_BITRATE_RF_64;
+ break;
+ default:
+ Dbprintf("Invalid clock rate: %d", clock);
+ return;
+ }
+
+ // Writing configuration for T55x7 tag
+ T55xxWriteBlock(clock |
+ T55x7_MODULATION_MANCHESTER |
+ 2 << T55x7_MAXBLOCK_SHIFT,
+ 0, 0, 0);
+ }
+ else
+ // Writing configuration for T5555(Q5) tag
+ T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT |
+ T5555_MODULATION_MANCHESTER |
+ 2 << T5555_MAXBLOCK_SHIFT,
+ 0, 0, 0);
+
+ LED_D_OFF();
+ Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555",
+ (uint32_t)(id >> 32), (uint32_t)id);
}
// Clone Indala 64-bit tag by UID to T55x7
void CopyIndala64toT55x7(int hi, int lo)
{
- //Program the 2 data blocks for supplied 64bit UID
- // and the block 0 for Indala64 format
- T55xxWriteBlock(hi,1,0,0);
- T55xxWriteBlock(lo,2,0,0);
- //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=2)
- T55xxWriteBlock(T55x7_BITRATE_RF_32 |
- T55x7_MODULATION_PSK1 |
- 2 << T55x7_MAXBLOCK_SHIFT,
- 0, 0, 0);
- //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
- // T5567WriteBlock(0x603E1042,0);
+ //Program the 2 data blocks for supplied 64bit UID
+ // and the block 0 for Indala64 format
+ T55xxWriteBlock(hi,1,0,0);
+ T55xxWriteBlock(lo,2,0,0);
+ //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=2)
+ T55xxWriteBlock(T55x7_BITRATE_RF_32 |
+ T55x7_MODULATION_PSK1 |
+ 2 << T55x7_MAXBLOCK_SHIFT,
+ 0, 0, 0);
+ //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
+ // T5567WriteBlock(0x603E1042,0);
- DbpString("DONE!");
+ DbpString("DONE!");
}
void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int uid6, int uid7)
{
- //Program the 7 data blocks for supplied 224bit UID
- // and the block 0 for Indala224 format
- T55xxWriteBlock(uid1,1,0,0);
- T55xxWriteBlock(uid2,2,0,0);
- T55xxWriteBlock(uid3,3,0,0);
- T55xxWriteBlock(uid4,4,0,0);
- T55xxWriteBlock(uid5,5,0,0);
- T55xxWriteBlock(uid6,6,0,0);
- T55xxWriteBlock(uid7,7,0,0);
- //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
- T55xxWriteBlock(T55x7_BITRATE_RF_32 |
- T55x7_MODULATION_PSK1 |
- 7 << T55x7_MAXBLOCK_SHIFT,
- 0,0,0);
- //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
- // T5567WriteBlock(0x603E10E2,0);
-
- DbpString("DONE!");
+ //Program the 7 data blocks for supplied 224bit UID
+ // and the block 0 for Indala224 format
+ T55xxWriteBlock(uid1,1,0,0);
+ T55xxWriteBlock(uid2,2,0,0);
+ T55xxWriteBlock(uid3,3,0,0);
+ T55xxWriteBlock(uid4,4,0,0);
+ T55xxWriteBlock(uid5,5,0,0);
+ T55xxWriteBlock(uid6,6,0,0);
+ T55xxWriteBlock(uid7,7,0,0);
+ //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
+ T55xxWriteBlock(T55x7_BITRATE_RF_32 |
+ T55x7_MODULATION_PSK1 |
+ 7 << T55x7_MAXBLOCK_SHIFT,
+ 0,0,0);
+ //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
+ // T5567WriteBlock(0x603E10E2,0);
+
+ DbpString("DONE!");
}
#define max(x,y) ( x<y ? y:x)
int DemodPCF7931(uint8_t **outBlocks) {
- uint8_t BitStream[256];
- uint8_t Blocks[8][16];
- uint8_t *GraphBuffer = BigBuf_get_addr();
- int GraphTraceLen = BigBuf_max_traceLen();
- int i, j, lastval, bitidx, half_switch;
- int clock = 64;
- int tolerance = clock / 8;
- int pmc, block_done;
- int lc, warnings = 0;
- int num_blocks = 0;
- int lmin=128, lmax=128;
- uint8_t dir;
+ uint8_t BitStream[256];
+ uint8_t Blocks[8][16];
+ uint8_t *GraphBuffer = BigBuf_get_addr();
+ int GraphTraceLen = BigBuf_max_traceLen();
+ int i, j, lastval, bitidx, half_switch;
+ int clock = 64;
+ int tolerance = clock / 8;
+ int pmc, block_done;
+ int lc, warnings = 0;
+ int num_blocks = 0;
+ int lmin=128, lmax=128;
+ uint8_t dir;
LFSetupFPGAForADC(95, true);
DoAcquisition_default(0, 0);
- lmin = 64;
- lmax = 192;
-
- i = 2;
-
- /* Find first local max/min */
- if(GraphBuffer[1] > GraphBuffer[0]) {
- while(i < GraphTraceLen) {
- if( !(GraphBuffer[i] > GraphBuffer[i-1]) && GraphBuffer[i] > lmax)
- break;
- i++;
- }
- dir = 0;
- }
- else {
- while(i < GraphTraceLen) {
- if( !(GraphBuffer[i] < GraphBuffer[i-1]) && GraphBuffer[i] < lmin)
- break;
- i++;
- }
- dir = 1;
- }
-
- lastval = i++;
- half_switch = 0;
- pmc = 0;
- block_done = 0;
-
- for (bitidx = 0; i < GraphTraceLen; i++)
- {
- if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin))
- {
- lc = i - lastval;
- lastval = i;
-
- // Switch depending on lc length:
- // Tolerance is 1/8 of clock rate (arbitrary)
- if (abs(lc-clock/4) < tolerance) {
- // 16T0
- if((i - pmc) == lc) { /* 16T0 was previous one */
- /* It's a PMC ! */
- i += (128+127+16+32+33+16)-1;
- lastval = i;
- pmc = 0;
- block_done = 1;
- }
- else {
- pmc = i;
- }
- } else if (abs(lc-clock/2) < tolerance) {
- // 32TO
- if((i - pmc) == lc) { /* 16T0 was previous one */
- /* It's a PMC ! */
- i += (128+127+16+32+33)-1;
- lastval = i;
- pmc = 0;
- block_done = 1;
- }
- else if(half_switch == 1) {
- BitStream[bitidx++] = 0;
- half_switch = 0;
- }
- else
- half_switch++;
- } else if (abs(lc-clock) < tolerance) {
- // 64TO
- BitStream[bitidx++] = 1;
- } else {
- // Error
- warnings++;
- if (warnings > 10)
- {
- Dbprintf("Error: too many detection errors, aborting.");
- return 0;
- }
- }
-
- if(block_done == 1) {
- if(bitidx == 128) {
- for(j=0; j<16; j++) {
- Blocks[num_blocks][j] = 128*BitStream[j*8+7]+
- 64*BitStream[j*8+6]+
- 32*BitStream[j*8+5]+
- 16*BitStream[j*8+4]+
- 8*BitStream[j*8+3]+
- 4*BitStream[j*8+2]+
- 2*BitStream[j*8+1]+
- BitStream[j*8];
- }
- num_blocks++;
- }
- bitidx = 0;
- block_done = 0;
- half_switch = 0;
- }
- if(i < GraphTraceLen)
- {
- if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0;
- else dir = 1;
- }
- }
- if(bitidx==255)
- bitidx=0;
- warnings = 0;
- if(num_blocks == 4) break;
- }
- memcpy(outBlocks, Blocks, 16*num_blocks);
- return num_blocks;
+ lmin = 64;
+ lmax = 192;
+
+ i = 2;
+
+ /* Find first local max/min */
+ if(GraphBuffer[1] > GraphBuffer[0]) {
+ while(i < GraphTraceLen) {
+ if( !(GraphBuffer[i] > GraphBuffer[i-1]) && GraphBuffer[i] > lmax)
+ break;
+ i++;
+ }
+ dir = 0;
+ }
+ else {
+ while(i < GraphTraceLen) {
+ if( !(GraphBuffer[i] < GraphBuffer[i-1]) && GraphBuffer[i] < lmin)
+ break;
+ i++;
+ }
+ dir = 1;
+ }
+
+ lastval = i++;
+ half_switch = 0;
+ pmc = 0;
+ block_done = 0;
+
+ for (bitidx = 0; i < GraphTraceLen; i++)
+ {
+ if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin))
+ {
+ lc = i - lastval;
+ lastval = i;
+
+ // Switch depending on lc length:
+ // Tolerance is 1/8 of clock rate (arbitrary)
+ if (abs(lc-clock/4) < tolerance) {
+ // 16T0
+ if((i - pmc) == lc) { /* 16T0 was previous one */
+ /* It's a PMC ! */
+ i += (128+127+16+32+33+16)-1;
+ lastval = i;
+ pmc = 0;
+ block_done = 1;
+ }
+ else {
+ pmc = i;
+ }
+ } else if (abs(lc-clock/2) < tolerance) {
+ // 32TO
+ if((i - pmc) == lc) { /* 16T0 was previous one */
+ /* It's a PMC ! */
+ i += (128+127+16+32+33)-1;
+ lastval = i;
+ pmc = 0;
+ block_done = 1;
+ }
+ else if(half_switch == 1) {
+ BitStream[bitidx++] = 0;
+ half_switch = 0;
+ }
+ else
+ half_switch++;
+ } else if (abs(lc-clock) < tolerance) {
+ // 64TO
+ BitStream[bitidx++] = 1;
+ } else {
+ // Error
+ warnings++;
+ if (warnings > 10)
+ {
+ Dbprintf("Error: too many detection errors, aborting.");
+ return 0;
+ }
+ }
+
+ if(block_done == 1) {
+ if(bitidx == 128) {
+ for(j=0; j<16; j++) {
+ Blocks[num_blocks][j] = 128*BitStream[j*8+7]+
+ 64*BitStream[j*8+6]+
+ 32*BitStream[j*8+5]+
+ 16*BitStream[j*8+4]+
+ 8*BitStream[j*8+3]+
+ 4*BitStream[j*8+2]+
+ 2*BitStream[j*8+1]+
+ BitStream[j*8];
+ }
+ num_blocks++;
+ }
+ bitidx = 0;
+ block_done = 0;
+ half_switch = 0;
+ }
+ if(i < GraphTraceLen)
+ {
+ if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0;
+ else dir = 1;
+ }
+ }
+ if(bitidx==255)
+ bitidx=0;
+ warnings = 0;
+ if(num_blocks == 4) break;
+ }
+ memcpy(outBlocks, Blocks, 16*num_blocks);
+ return num_blocks;
}
int IsBlock0PCF7931(uint8_t *Block) {
- // Assume RFU means 0 :)
- if((memcmp(Block, "\x00\x00\x00\x00\x00\x00\x00\x01", 8) == 0) && memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) // PAC enabled
- return 1;
- if((memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) && Block[7] == 0) // PAC disabled, can it *really* happen ?
- return 1;
- return 0;
+ // Assume RFU means 0 :)
+ if((memcmp(Block, "\x00\x00\x00\x00\x00\x00\x00\x01", 8) == 0) && memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) // PAC enabled
+ return 1;
+ if((memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) && Block[7] == 0) // PAC disabled, can it *really* happen ?
+ return 1;
+ return 0;
}
int IsBlock1PCF7931(uint8_t *Block) {
- // Assume RFU means 0 :)
- if(Block[10] == 0 && Block[11] == 0 && Block[12] == 0 && Block[13] == 0)
- if((Block[14] & 0x7f) <= 9 && Block[15] <= 9)
- return 1;
+ // Assume RFU means 0 :)
+ if(Block[10] == 0 && Block[11] == 0 && Block[12] == 0 && Block[13] == 0)
+ if((Block[14] & 0x7f) <= 9 && Block[15] <= 9)
+ return 1;
- return 0;
+ return 0;
}
#define ALLOC 16
void ReadPCF7931() {
- uint8_t Blocks[8][17];
- uint8_t tmpBlocks[4][16];
- int i, j, ind, ind2, n;
- int num_blocks = 0;
- int max_blocks = 8;
- int ident = 0;
- int error = 0;
- int tries = 0;
-
- memset(Blocks, 0, 8*17*sizeof(uint8_t));
-
- do {
- memset(tmpBlocks, 0, 4*16*sizeof(uint8_t));
- n = DemodPCF7931((uint8_t**)tmpBlocks);
- if(!n)
- error++;
- if(error==10 && num_blocks == 0) {
- Dbprintf("Error, no tag or bad tag");
- return;
- }
- else if (tries==20 || error==10) {
- Dbprintf("Error reading the tag");
- Dbprintf("Here is the partial content");
- goto end;
- }
-
- for(i=0; i<n; i++)
- Dbprintf("(dbg) %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
- tmpBlocks[i][0], tmpBlocks[i][1], tmpBlocks[i][2], tmpBlocks[i][3], tmpBlocks[i][4], tmpBlocks[i][5], tmpBlocks[i][6], tmpBlocks[i][7],
- tmpBlocks[i][8], tmpBlocks[i][9], tmpBlocks[i][10], tmpBlocks[i][11], tmpBlocks[i][12], tmpBlocks[i][13], tmpBlocks[i][14], tmpBlocks[i][15]);
- if(!ident) {
- for(i=0; i<n; i++) {
- if(IsBlock0PCF7931(tmpBlocks[i])) {
- // Found block 0 ?
- if(i < n-1 && IsBlock1PCF7931(tmpBlocks[i+1])) {
- // Found block 1!
- // \o/
- ident = 1;
- memcpy(Blocks[0], tmpBlocks[i], 16);
- Blocks[0][ALLOC] = 1;
- memcpy(Blocks[1], tmpBlocks[i+1], 16);
- Blocks[1][ALLOC] = 1;
- max_blocks = max((Blocks[1][14] & 0x7f), Blocks[1][15]) + 1;
- // Debug print
- Dbprintf("(dbg) Max blocks: %d", max_blocks);
- num_blocks = 2;
- // Handle following blocks
- for(j=i+2, ind2=2; j!=i; j++, ind2++, num_blocks++) {
- if(j==n) j=0;
- if(j==i) break;
- memcpy(Blocks[ind2], tmpBlocks[j], 16);
- Blocks[ind2][ALLOC] = 1;
- }
- break;
- }
- }
- }
- }
- else {
- for(i=0; i<n; i++) { // Look for identical block in known blocks
- if(memcmp(tmpBlocks[i], "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 16)) { // Block is not full of 00
- for(j=0; j<max_blocks; j++) {
- if(Blocks[j][ALLOC] == 1 && !memcmp(tmpBlocks[i], Blocks[j], 16)) {
- // Found an identical block
- for(ind=i-1,ind2=j-1; ind >= 0; ind--,ind2--) {
- if(ind2 < 0)
- ind2 = max_blocks;
- if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
- // Dbprintf("Tmp %d -> Block %d", ind, ind2);
- memcpy(Blocks[ind2], tmpBlocks[ind], 16);
- Blocks[ind2][ALLOC] = 1;
- num_blocks++;
- if(num_blocks == max_blocks) goto end;
- }
- }
- for(ind=i+1,ind2=j+1; ind < n; ind++,ind2++) {
- if(ind2 > max_blocks)
- ind2 = 0;
- if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
- // Dbprintf("Tmp %d -> Block %d", ind, ind2);
- memcpy(Blocks[ind2], tmpBlocks[ind], 16);
- Blocks[ind2][ALLOC] = 1;
- num_blocks++;
- if(num_blocks == max_blocks) goto end;
- }
- }
- }
- }
- }
- }
- }
- tries++;
- if (BUTTON_PRESS()) return;
- } while (num_blocks != max_blocks);
+ uint8_t Blocks[8][17];
+ uint8_t tmpBlocks[4][16];
+ int i, j, ind, ind2, n;
+ int num_blocks = 0;
+ int max_blocks = 8;
+ int ident = 0;
+ int error = 0;
+ int tries = 0;
+
+ memset(Blocks, 0, 8*17*sizeof(uint8_t));
+
+ do {
+ memset(tmpBlocks, 0, 4*16*sizeof(uint8_t));
+ n = DemodPCF7931((uint8_t**)tmpBlocks);
+ if(!n)
+ error++;
+ if(error==10 && num_blocks == 0) {
+ Dbprintf("Error, no tag or bad tag");
+ return;
+ }
+ else if (tries==20 || error==10) {
+ Dbprintf("Error reading the tag");
+ Dbprintf("Here is the partial content");
+ goto end;
+ }
+
+ for(i=0; i<n; i++)
+ Dbprintf("(dbg) %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+ tmpBlocks[i][0], tmpBlocks[i][1], tmpBlocks[i][2], tmpBlocks[i][3], tmpBlocks[i][4], tmpBlocks[i][5], tmpBlocks[i][6], tmpBlocks[i][7],
+ tmpBlocks[i][8], tmpBlocks[i][9], tmpBlocks[i][10], tmpBlocks[i][11], tmpBlocks[i][12], tmpBlocks[i][13], tmpBlocks[i][14], tmpBlocks[i][15]);
+ if(!ident) {
+ for(i=0; i<n; i++) {
+ if(IsBlock0PCF7931(tmpBlocks[i])) {
+ // Found block 0 ?
+ if(i < n-1 && IsBlock1PCF7931(tmpBlocks[i+1])) {
+ // Found block 1!
+ // \o/
+ ident = 1;
+ memcpy(Blocks[0], tmpBlocks[i], 16);
+ Blocks[0][ALLOC] = 1;
+ memcpy(Blocks[1], tmpBlocks[i+1], 16);
+ Blocks[1][ALLOC] = 1;
+ max_blocks = max((Blocks[1][14] & 0x7f), Blocks[1][15]) + 1;
+ // Debug print
+ Dbprintf("(dbg) Max blocks: %d", max_blocks);
+ num_blocks = 2;
+ // Handle following blocks
+ for(j=i+2, ind2=2; j!=i; j++, ind2++, num_blocks++) {
+ if(j==n) j=0;
+ if(j==i) break;
+ memcpy(Blocks[ind2], tmpBlocks[j], 16);
+ Blocks[ind2][ALLOC] = 1;
+ }
+ break;
+ }
+ }
+ }
+ }
+ else {
+ for(i=0; i<n; i++) { // Look for identical block in known blocks
+ if(memcmp(tmpBlocks[i], "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 16)) { // Block is not full of 00
+ for(j=0; j<max_blocks; j++) {
+ if(Blocks[j][ALLOC] == 1 && !memcmp(tmpBlocks[i], Blocks[j], 16)) {
+ // Found an identical block
+ for(ind=i-1,ind2=j-1; ind >= 0; ind--,ind2--) {
+ if(ind2 < 0)
+ ind2 = max_blocks;
+ if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
+ // Dbprintf("Tmp %d -> Block %d", ind, ind2);
+ memcpy(Blocks[ind2], tmpBlocks[ind], 16);
+ Blocks[ind2][ALLOC] = 1;
+ num_blocks++;
+ if(num_blocks == max_blocks) goto end;
+ }
+ }
+ for(ind=i+1,ind2=j+1; ind < n; ind++,ind2++) {
+ if(ind2 > max_blocks)
+ ind2 = 0;
+ if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
+ // Dbprintf("Tmp %d -> Block %d", ind, ind2);
+ memcpy(Blocks[ind2], tmpBlocks[ind], 16);
+ Blocks[ind2][ALLOC] = 1;
+ num_blocks++;
+ if(num_blocks == max_blocks) goto end;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ tries++;
+ if (BUTTON_PRESS()) return;
+ } while (num_blocks != max_blocks);
end:
- Dbprintf("-----------------------------------------");
- Dbprintf("Memory content:");
- Dbprintf("-----------------------------------------");
- for(i=0; i<max_blocks; i++) {
- if(Blocks[i][ALLOC]==1)
- Dbprintf("%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
- Blocks[i][0], Blocks[i][1], Blocks[i][2], Blocks[i][3], Blocks[i][4], Blocks[i][5], Blocks[i][6], Blocks[i][7],
- Blocks[i][8], Blocks[i][9], Blocks[i][10], Blocks[i][11], Blocks[i][12], Blocks[i][13], Blocks[i][14], Blocks[i][15]);
- else
- Dbprintf("<missing block %d>", i);
- }
- Dbprintf("-----------------------------------------");
-
- return ;
+ Dbprintf("-----------------------------------------");
+ Dbprintf("Memory content:");
+ Dbprintf("-----------------------------------------");
+ for(i=0; i<max_blocks; i++) {
+ if(Blocks[i][ALLOC]==1)
+ Dbprintf("%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+ Blocks[i][0], Blocks[i][1], Blocks[i][2], Blocks[i][3], Blocks[i][4], Blocks[i][5], Blocks[i][6], Blocks[i][7],
+ Blocks[i][8], Blocks[i][9], Blocks[i][10], Blocks[i][11], Blocks[i][12], Blocks[i][13], Blocks[i][14], Blocks[i][15]);
+ else
+ Dbprintf("<missing block %d>", i);
+ }
+ Dbprintf("-----------------------------------------");
+
+ return ;
}
//====================================================================
//--------------------------------------------------------------------
uint8_t Prepare_Cmd( uint8_t cmd ) {
- //--------------------------------------------------------------------
+ //--------------------------------------------------------------------
- *forward_ptr++ = 0; //start bit
- *forward_ptr++ = 0; //second pause for 4050 code
+ *forward_ptr++ = 0; //start bit
+ *forward_ptr++ = 0; //second pause for 4050 code
- *forward_ptr++ = cmd;
- cmd >>= 1;
- *forward_ptr++ = cmd;
- cmd >>= 1;
- *forward_ptr++ = cmd;
- cmd >>= 1;
- *forward_ptr++ = cmd;
+ *forward_ptr++ = cmd;
+ cmd >>= 1;
+ *forward_ptr++ = cmd;
+ cmd >>= 1;
+ *forward_ptr++ = cmd;
+ cmd >>= 1;
+ *forward_ptr++ = cmd;
- return 6; //return number of emited bits
+ return 6; //return number of emited bits
}
//====================================================================
//--------------------------------------------------------------------
uint8_t Prepare_Addr( uint8_t addr ) {
- //--------------------------------------------------------------------
+ //--------------------------------------------------------------------
- register uint8_t line_parity;
+ register uint8_t line_parity;
- uint8_t i;
- line_parity = 0;
- for(i=0;i<6;i++) {
- *forward_ptr++ = addr;
- line_parity ^= addr;
- addr >>= 1;
- }
+ uint8_t i;
+ line_parity = 0;
+ for(i=0;i<6;i++) {
+ *forward_ptr++ = addr;
+ line_parity ^= addr;
+ addr >>= 1;
+ }
- *forward_ptr++ = (line_parity & 1);
+ *forward_ptr++ = (line_parity & 1);
- return 7; //return number of emited bits
+ return 7; //return number of emited bits
}
//====================================================================
//--------------------------------------------------------------------
uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) {
- //--------------------------------------------------------------------
-
- register uint8_t line_parity;
- register uint8_t column_parity;
- register uint8_t i, j;
- register uint16_t data;
-
- data = data_low;
- column_parity = 0;
-
- for(i=0; i<4; i++) {
- line_parity = 0;
- for(j=0; j<8; j++) {
- line_parity ^= data;
- column_parity ^= (data & 1) << j;
- *forward_ptr++ = data;
- data >>= 1;
- }
- *forward_ptr++ = line_parity;
- if(i == 1)
- data = data_hi;
- }
-
- for(j=0; j<8; j++) {
- *forward_ptr++ = column_parity;
- column_parity >>= 1;
- }
- *forward_ptr = 0;
-
- return 45; //return number of emited bits
+ //--------------------------------------------------------------------
+
+ register uint8_t line_parity;
+ register uint8_t column_parity;
+ register uint8_t i, j;
+ register uint16_t data;
+
+ data = data_low;
+ column_parity = 0;
+
+ for(i=0; i<4; i++) {
+ line_parity = 0;
+ for(j=0; j<8; j++) {
+ line_parity ^= data;
+ column_parity ^= (data & 1) << j;
+ *forward_ptr++ = data;
+ data >>= 1;
+ }
+ *forward_ptr++ = line_parity;
+ if(i == 1)
+ data = data_hi;
+ }
+
+ for(j=0; j<8; j++) {
+ *forward_ptr++ = column_parity;
+ column_parity >>= 1;
+ }
+ *forward_ptr = 0;
+
+ return 45; //return number of emited bits
}
//====================================================================
//====================================================================
void SendForward(uint8_t fwd_bit_count) {
- fwd_write_ptr = forwardLink_data;
- fwd_bit_sz = fwd_bit_count;
-
- LED_D_ON();
-
- //Field on
- FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-
- // Give it a bit of time for the resonant antenna to settle.
- // And for the tag to fully power up
- SpinDelay(150);
-
- // force 1st mod pulse (start gap must be longer for 4305)
- fwd_bit_sz--; //prepare next bit modulation
- fwd_write_ptr++;
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
- SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
- SpinDelayUs(16*8); //16 cycles on (8us each)
-
- // now start writting
- while(fwd_bit_sz-- > 0) { //prepare next bit modulation
- if(((*fwd_write_ptr++) & 1) == 1)
- SpinDelayUs(32*8); //32 cycles at 125Khz (8us each)
- else {
- //These timings work for 4469/4269/4305 (with the 55*8 above)
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
- SpinDelayUs(23*8); //16-4 cycles off (8us each)
- FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
- FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
- SpinDelayUs(9*8); //16 cycles on (8us each)
- }
- }
+ fwd_write_ptr = forwardLink_data;
+ fwd_bit_sz = fwd_bit_count;
+
+ LED_D_ON();
+
+ //Field on
+ FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+
+ // Give it a bit of time for the resonant antenna to settle.
+ // And for the tag to fully power up
+ SpinDelay(150);
+
+ // force 1st mod pulse (start gap must be longer for 4305)
+ fwd_bit_sz--; //prepare next bit modulation
+ fwd_write_ptr++;
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
+ SpinDelayUs(16*8); //16 cycles on (8us each)
+
+ // now start writting
+ while(fwd_bit_sz-- > 0) { //prepare next bit modulation
+ if(((*fwd_write_ptr++) & 1) == 1)
+ SpinDelayUs(32*8); //32 cycles at 125Khz (8us each)
+ else {
+ //These timings work for 4469/4269/4305 (with the 55*8 above)
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ SpinDelayUs(23*8); //16-4 cycles off (8us each)
+ FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
+ SpinDelayUs(9*8); //16 cycles on (8us each)
+ }
+ }
}
void EM4xLogin(uint32_t Password) {
- uint8_t fwd_bit_count;
+ uint8_t fwd_bit_count;
- forward_ptr = forwardLink_data;
- fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN );
- fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 );
+ forward_ptr = forwardLink_data;
+ fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN );
+ fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 );
- SendForward(fwd_bit_count);
+ SendForward(fwd_bit_count);
- //Wait for command to complete
- SpinDelay(20);
+ //Wait for command to complete
+ SpinDelay(20);
}
void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
- uint8_t fwd_bit_count;
- uint8_t *dest = BigBuf_get_addr();
- int m=0, i=0;
-
- //If password mode do login
- if (PwdMode == 1) EM4xLogin(Pwd);
-
- forward_ptr = forwardLink_data;
- fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
- fwd_bit_count += Prepare_Addr( Address );
-
- m = BigBuf_max_traceLen();
- // Clear destination buffer before sending the command
- memset(dest, 128, m);
- // Connect the A/D to the peak-detected low-frequency path.
- SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
- // Now set up the SSC to get the ADC samples that are now streaming at us.
- FpgaSetupSsc();
-
- SendForward(fwd_bit_count);
-
- // Now do the acquisition
- i = 0;
- for(;;) {
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
- AT91C_BASE_SSC->SSC_THR = 0x43;
- }
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
- dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
- i++;
- if (i >= m) break;
- }
- }
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
- LED_D_OFF();
+ uint8_t fwd_bit_count;
+ uint8_t *dest = BigBuf_get_addr();
+ int m=0, i=0;
+
+ //If password mode do login
+ if (PwdMode == 1) EM4xLogin(Pwd);
+
+ forward_ptr = forwardLink_data;
+ fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
+ fwd_bit_count += Prepare_Addr( Address );
+
+ m = BigBuf_max_traceLen();
+ // Clear destination buffer before sending the command
+ memset(dest, 128, m);
+ // Connect the A/D to the peak-detected low-frequency path.
+ SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+ // Now set up the SSC to get the ADC samples that are now streaming at us.
+ FpgaSetupSsc();
+
+ SendForward(fwd_bit_count);
+
+ // Now do the acquisition
+ i = 0;
+ for(;;) {
+ if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
+ AT91C_BASE_SSC->SSC_THR = 0x43;
+ }
+ if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
+ dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
+ i++;
+ if (i >= m) break;
+ }
+ }
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ LED_D_OFF();
}
void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
- uint8_t fwd_bit_count;
+ uint8_t fwd_bit_count;
- //If password mode do login
- if (PwdMode == 1) EM4xLogin(Pwd);
+ //If password mode do login
+ if (PwdMode == 1) EM4xLogin(Pwd);
- forward_ptr = forwardLink_data;
- fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
- fwd_bit_count += Prepare_Addr( Address );
- fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 );
+ forward_ptr = forwardLink_data;
+ fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
+ fwd_bit_count += Prepare_Addr( Address );
+ fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 );
- SendForward(fwd_bit_count);
+ SendForward(fwd_bit_count);
- //Wait for write to complete
- SpinDelay(20);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
- LED_D_OFF();
+ //Wait for write to complete
+ SpinDelay(20);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ LED_D_OFF();
}
int CmdSetDebugMode(const char *Cmd)
{
- int demod=0;
- sscanf(Cmd, "%i", &demod);
- g_debugMode=(uint8_t)demod;
- return 1;
+ int demod=0;
+ sscanf(Cmd, "%i", &demod);
+ g_debugMode=(uint8_t)demod;
+ return 1;
}
//by marshmellow
return;
}
if (bitLen>512) bitLen=512; //max output to 512 bits if we have more - should be plenty
-
+
// ensure equally divided by 16
bitLen &= 0xfff0;
-
+
for (i = 0; i <= (bitLen-16); i+=16) {
PrintAndLog("%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i",
- DemodBuffer[i],
- DemodBuffer[i+1],
- DemodBuffer[i+2],
- DemodBuffer[i+3],
- DemodBuffer[i+4],
- DemodBuffer[i+5],
- DemodBuffer[i+6],
- DemodBuffer[i+7],
- DemodBuffer[i+8],
- DemodBuffer[i+9],
- DemodBuffer[i+10],
- DemodBuffer[i+11],
- DemodBuffer[i+12],
- DemodBuffer[i+13],
- DemodBuffer[i+14],
- DemodBuffer[i+15]);
+ DemodBuffer[i],
+ DemodBuffer[i+1],
+ DemodBuffer[i+2],
+ DemodBuffer[i+3],
+ DemodBuffer[i+4],
+ DemodBuffer[i+5],
+ DemodBuffer[i+6],
+ DemodBuffer[i+7],
+ DemodBuffer[i+8],
+ DemodBuffer[i+9],
+ DemodBuffer[i+10],
+ DemodBuffer[i+11],
+ DemodBuffer[i+12],
+ DemodBuffer[i+13],
+ DemodBuffer[i+14],
+ DemodBuffer[i+15]
+ );
}
return;
}
int CmdPrintDemodBuff(const char *Cmd)
{
- char hex;
- char printBuff[512]={0x00};
- uint8_t numBits = DemodBufferLen & 0xFFF0;
- sscanf(Cmd, "%c", &hex);
- if (hex == 'h'){
- PrintAndLog("Usage: data printdemodbuffer [x]");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" x output in hex (omit for binary output)");
- return 0;
- }
- if (hex == 'x'){
- numBits = binarraytohex(printBuff, (char *)DemodBuffer, numBits);
- if (numBits==0) return 0;
- PrintAndLog("DemodBuffer: %s",printBuff);
- } else {
- printDemodBuff();
- }
- return 1;
+ char hex;
+ char printBuff[512]={0x00};
+ uint8_t numBits = DemodBufferLen & 0xFFF0;
+ sscanf(Cmd, "%c", &hex);
+ if (hex == 'h'){
+ PrintAndLog("Usage: data printdemodbuffer [x]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" x output in hex (omit for binary output)");
+ return 0;
+ }
+ if (hex == 'x'){
+ numBits = binarraytohex(printBuff, (char *)DemodBuffer, numBits);
+ if (numBits==0) return 0;
+ PrintAndLog("DemodBuffer: %s",printBuff);
+ } else {
+ printDemodBuff();
+ }
+ return 1;
}
int CmdAmp(const char *Cmd)
{
- int i, rising, falling;
- int max = INT_MIN, min = INT_MAX;
-
- for (i = 10; i < GraphTraceLen; ++i) {
- if (GraphBuffer[i] > max)
- max = GraphBuffer[i];
- if (GraphBuffer[i] < min)
- min = GraphBuffer[i];
- }
-
- if (max != min) {
- rising = falling= 0;
- for (i = 0; i < GraphTraceLen; ++i) {
- if (GraphBuffer[i + 1] < GraphBuffer[i]) {
- if (rising) {
- GraphBuffer[i] = max;
- rising = 0;
- }
- falling = 1;
- }
- if (GraphBuffer[i + 1] > GraphBuffer[i]) {
- if (falling) {
- GraphBuffer[i] = min;
- falling = 0;
- }
- rising= 1;
- }
- }
- }
- RepaintGraphWindow();
- return 0;
+ int i, rising, falling;
+ int max = INT_MIN, min = INT_MAX;
+
+ for (i = 10; i < GraphTraceLen; ++i) {
+ if (GraphBuffer[i] > max)
+ max = GraphBuffer[i];
+ if (GraphBuffer[i] < min)
+ min = GraphBuffer[i];
+ }
+
+ if (max != min) {
+ rising = falling= 0;
+ for (i = 0; i < GraphTraceLen; ++i) {
+ if (GraphBuffer[i + 1] < GraphBuffer[i]) {
+ if (rising) {
+ GraphBuffer[i] = max;
+ rising = 0;
+ }
+ falling = 1;
+ }
+ if (GraphBuffer[i + 1] > GraphBuffer[i]) {
+ if (falling) {
+ GraphBuffer[i] = min;
+ falling = 0;
+ }
+ rising= 1;
+ }
+ }
+ }
+ RepaintGraphWindow();
+ return 0;
}
/*
//this function strictly converts highs and lows to 1s and 0s for each sample in the graphbuffer
int Cmdaskdemod(const char *Cmd)
{
- int i;
- int c, high = 0, low = 0;
-
- sscanf(Cmd, "%i", &c);
-
- /* Detect high and lows */
- for (i = 0; i < GraphTraceLen; ++i)
- {
- if (GraphBuffer[i] > high)
- high = GraphBuffer[i];
- else if (GraphBuffer[i] < low)
- low = GraphBuffer[i];
- }
- high=abs(high*.75);
- low=abs(low*.75);
- if (c != 0 && c != 1) {
- PrintAndLog("Invalid argument: %s", Cmd);
- return 0;
- }
- //prime loop
- if (GraphBuffer[0] > 0) {
- GraphBuffer[0] = 1-c;
- } else {
- GraphBuffer[0] = c;
- }
- for (i = 1; i < GraphTraceLen; ++i) {
- /* Transitions are detected at each peak
- * Transitions are either:
- * - we're low: transition if we hit a high
- * - we're high: transition if we hit a low
- * (we need to do it this way because some tags keep high or
- * low for long periods, others just reach the peak and go
- * down)
- */
- //[marhsmellow] change == to >= for high and <= for low for fuzz
- if ((GraphBuffer[i] >= high) && (GraphBuffer[i - 1] == c)) {
- GraphBuffer[i] = 1 - c;
- } else if ((GraphBuffer[i] <= low) && (GraphBuffer[i - 1] == (1 - c))){
- GraphBuffer[i] = c;
- } else {
- /* No transition */
- GraphBuffer[i] = GraphBuffer[i - 1];
- }
- }
- RepaintGraphWindow();
- return 0;
+ int i;
+ int c, high = 0, low = 0;
+
+ sscanf(Cmd, "%i", &c);
+
+ /* Detect high and lows */
+ for (i = 0; i < GraphTraceLen; ++i)
+ {
+ if (GraphBuffer[i] > high)
+ high = GraphBuffer[i];
+ else if (GraphBuffer[i] < low)
+ low = GraphBuffer[i];
+ }
+ high=abs(high*.75);
+ low=abs(low*.75);
+ if (c != 0 && c != 1) {
+ PrintAndLog("Invalid argument: %s", Cmd);
+ return 0;
+ }
+ //prime loop
+ if (GraphBuffer[0] > 0) {
+ GraphBuffer[0] = 1-c;
+ } else {
+ GraphBuffer[0] = c;
+ }
+ for (i = 1; i < GraphTraceLen; ++i) {
+ /* Transitions are detected at each peak
+ * Transitions are either:
+ * - we're low: transition if we hit a high
+ * - we're high: transition if we hit a low
+ * (we need to do it this way because some tags keep high or
+ * low for long periods, others just reach the peak and go
+ * down)
+ */
+ //[marhsmellow] change == to >= for high and <= for low for fuzz
+ if ((GraphBuffer[i] >= high) && (GraphBuffer[i - 1] == c)) {
+ GraphBuffer[i] = 1 - c;
+ } else if ((GraphBuffer[i] <= low) && (GraphBuffer[i - 1] == (1 - c))){
+ GraphBuffer[i] = c;
+ } else {
+ /* No transition */
+ GraphBuffer[i] = GraphBuffer[i - 1];
+ }
+ }
+ RepaintGraphWindow();
+ return 0;
}
//this function strictly converts >1 to 1 and <1 to 0 for each sample in the graphbuffer
int CmdGetBitStream(const char *Cmd)
{
- int i;
- CmdHpf(Cmd);
- for (i = 0; i < GraphTraceLen; i++) {
- if (GraphBuffer[i] >= 1) {
- GraphBuffer[i] = 1;
- } else {
- GraphBuffer[i] = 0;
- }
- }
- RepaintGraphWindow();
- return 0;
+ int i;
+ CmdHpf(Cmd);
+ for (i = 0; i < GraphTraceLen; i++) {
+ if (GraphBuffer[i] >= 1) {
+ GraphBuffer[i] = 1;
+ } else {
+ GraphBuffer[i] = 0;
+ }
+ }
+ RepaintGraphWindow();
+ return 0;
}
}
if (bitLen>512) bitLen=512;
- // ensure equally divided by 16
+ // ensure equally divided by 16
bitLen &= 0xfff0;
for (i = 0; i <= (bitLen-16); i+=16) {
PrintAndLog("%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i%i",
- BitStream[i],
- BitStream[i+1],
- BitStream[i+2],
- BitStream[i+3],
- BitStream[i+4],
- BitStream[i+5],
- BitStream[i+6],
- BitStream[i+7],
- BitStream[i+8],
- BitStream[i+9],
- BitStream[i+10],
- BitStream[i+11],
- BitStream[i+12],
- BitStream[i+13],
- BitStream[i+14],
- BitStream[i+15]);
+ BitStream[i],
+ BitStream[i+1],
+ BitStream[i+2],
+ BitStream[i+3],
+ BitStream[i+4],
+ BitStream[i+5],
+ BitStream[i+6],
+ BitStream[i+7],
+ BitStream[i+8],
+ BitStream[i+9],
+ BitStream[i+10],
+ BitStream[i+11],
+ BitStream[i+12],
+ BitStream[i+13],
+ BitStream[i+14],
+ BitStream[i+15]
+ );
}
return;
}
//print 64 bit EM410x ID in multiple formats
void printEM410x(uint32_t hi, uint64_t id)
{
- if (id || hi){
- uint64_t iii=1;
- uint64_t id2lo=0;
- uint32_t ii=0;
- uint32_t i=0;
- for (ii=5; ii>0;ii--){
- for (i=0;i<8;i++){
- id2lo=(id2lo<<1LL) | ((id & (iii << (i+((ii-1)*8)))) >> (i+((ii-1)*8)));
- }
- }
- if (hi){
- //output 88 bit em id
- PrintAndLog("\nEM TAG ID : %06x%016llx", hi, id);
- } else{
- //output 40 bit em id
- PrintAndLog("\nEM TAG ID : %010llx", id);
- PrintAndLog("Unique TAG ID : %010llx", id2lo);
- PrintAndLog("\nPossible de-scramble patterns");
- PrintAndLog("HoneyWell IdentKey {");
- PrintAndLog("DEZ 8 : %08lld",id & 0xFFFFFF);
- PrintAndLog("DEZ 10 : %010lld",id & 0xFFFFFFFF);
- PrintAndLog("DEZ 5.5 : %05lld.%05lld",(id>>16LL) & 0xFFFF,(id & 0xFFFF));
- PrintAndLog("DEZ 3.5A : %03lld.%05lld",(id>>32ll),(id & 0xFFFF));
- PrintAndLog("DEZ 3.5B : %03lld.%05lld",(id & 0xFF000000) >> 24,(id & 0xFFFF));
- PrintAndLog("DEZ 3.5C : %03lld.%05lld",(id & 0xFF0000) >> 16,(id & 0xFFFF));
- PrintAndLog("DEZ 14/IK2 : %014lld",id);
- PrintAndLog("DEZ 15/IK3 : %015lld",id2lo);
- PrintAndLog("DEZ 20/ZK : %02lld%02lld%02lld%02lld%02lld%02lld%02lld%02lld%02lld%02lld",
- (id2lo & 0xf000000000) >> 36,
- (id2lo & 0x0f00000000) >> 32,
- (id2lo & 0x00f0000000) >> 28,
- (id2lo & 0x000f000000) >> 24,
- (id2lo & 0x0000f00000) >> 20,
- (id2lo & 0x00000f0000) >> 16,
- (id2lo & 0x000000f000) >> 12,
- (id2lo & 0x0000000f00) >> 8,
- (id2lo & 0x00000000f0) >> 4,
- (id2lo & 0x000000000f)
- );
- uint64_t paxton = (((id>>32) << 24) | (id & 0xffffff)) + 0x143e00;
- PrintAndLog("}\nOther : %05lld_%03lld_%08lld",(id&0xFFFF),((id>>16LL) & 0xFF),(id & 0xFFFFFF));
- PrintAndLog("Pattern Paxton : %0d", paxton);
-
- uint32_t p1id = (id & 0xFFFFFF);
- uint8_t arr[32] = {0x00};
- int i =0;
- int j = 23;
- for (; i < 24; ++i, --j ){
- arr[i] = (p1id >> i) & 1;
- }
-
- uint32_t p1 = 0;
-
- p1 |= arr[23] << 21;
- p1 |= arr[22] << 23;
- p1 |= arr[21] << 20;
- p1 |= arr[20] << 22;
-
- p1 |= arr[19] << 18;
- p1 |= arr[18] << 16;
- p1 |= arr[17] << 19;
- p1 |= arr[16] << 17;
-
- p1 |= arr[15] << 13;
- p1 |= arr[14] << 15;
- p1 |= arr[13] << 12;
- p1 |= arr[12] << 14;
-
- p1 |= arr[11] << 6;
- p1 |= arr[10] << 2;
- p1 |= arr[9] << 7;
- p1 |= arr[8] << 1;
-
- p1 |= arr[7] << 0;
- p1 |= arr[6] << 8;
- p1 |= arr[5] << 11;
- p1 |= arr[4] << 3;
-
- p1 |= arr[3] << 10;
- p1 |= arr[2] << 4;
- p1 |= arr[1] << 5;
- p1 |= arr[0] << 9;
- PrintAndLog("Pattern 1 : 0x%X - %d", p1, p1);
-
- uint16_t sebury1 = id & 0xFFFF;
- uint8_t sebury2 = (id >> 16) & 0x7F;
- uint32_t sebury3 = id & 0x7FFFFF;
- PrintAndLog("Pattern Sebury : %d %d %d (hex: %X %X %X)", sebury1, sebury2, sebury3, sebury1, sebury2, sebury3);
- }
- }
- return;
+ if (id || hi){
+ uint64_t iii=1;
+ uint64_t id2lo=0;
+ uint32_t ii=0;
+ uint32_t i=0;
+ for (ii=5; ii>0;ii--){
+ for (i=0;i<8;i++){
+ id2lo=(id2lo<<1LL) | ((id & (iii << (i+((ii-1)*8)))) >> (i+((ii-1)*8)));
+ }
+ }
+ if (hi){
+ //output 88 bit em id
+ PrintAndLog("\nEM TAG ID : %06x%016llx", hi, id);
+ } else{
+ //output 40 bit em id
+ PrintAndLog("\nEM TAG ID : %010llx", id);
+ PrintAndLog("Unique TAG ID : %010llx", id2lo);
+ PrintAndLog("\nPossible de-scramble patterns");
+ PrintAndLog("HoneyWell IdentKey {");
+ PrintAndLog("DEZ 8 : %08lld",id & 0xFFFFFF);
+ PrintAndLog("DEZ 10 : %010lld",id & 0xFFFFFFFF);
+ PrintAndLog("DEZ 5.5 : %05lld.%05lld",(id>>16LL) & 0xFFFF,(id & 0xFFFF));
+ PrintAndLog("DEZ 3.5A : %03lld.%05lld",(id>>32ll),(id & 0xFFFF));
+ PrintAndLog("DEZ 3.5B : %03lld.%05lld",(id & 0xFF000000) >> 24,(id & 0xFFFF));
+ PrintAndLog("DEZ 3.5C : %03lld.%05lld",(id & 0xFF0000) >> 16,(id & 0xFFFF));
+ PrintAndLog("DEZ 14/IK2 : %014lld",id);
+ PrintAndLog("DEZ 15/IK3 : %015lld",id2lo);
+ PrintAndLog("DEZ 20/ZK : %02lld%02lld%02lld%02lld%02lld%02lld%02lld%02lld%02lld%02lld",
+ (id2lo & 0xf000000000) >> 36,
+ (id2lo & 0x0f00000000) >> 32,
+ (id2lo & 0x00f0000000) >> 28,
+ (id2lo & 0x000f000000) >> 24,
+ (id2lo & 0x0000f00000) >> 20,
+ (id2lo & 0x00000f0000) >> 16,
+ (id2lo & 0x000000f000) >> 12,
+ (id2lo & 0x0000000f00) >> 8,
+ (id2lo & 0x00000000f0) >> 4,
+ (id2lo & 0x000000000f)
+ );
+ uint64_t paxton = (((id>>32) << 24) | (id & 0xffffff)) + 0x143e00;
+ PrintAndLog("}\nOther : %05lld_%03lld_%08lld",(id&0xFFFF),((id>>16LL) & 0xFF),(id & 0xFFFFFF));
+ PrintAndLog("Pattern Paxton : %0d", paxton);
+
+ uint32_t p1id = (id & 0xFFFFFF);
+ uint8_t arr[32] = {0x00};
+ int i =0;
+ int j = 23;
+ for (; i < 24; ++i, --j ){
+ arr[i] = (p1id >> i) & 1;
+ }
+
+ uint32_t p1 = 0;
+
+ p1 |= arr[23] << 21;
+ p1 |= arr[22] << 23;
+ p1 |= arr[21] << 20;
+ p1 |= arr[20] << 22;
+
+ p1 |= arr[19] << 18;
+ p1 |= arr[18] << 16;
+ p1 |= arr[17] << 19;
+ p1 |= arr[16] << 17;
+
+ p1 |= arr[15] << 13;
+ p1 |= arr[14] << 15;
+ p1 |= arr[13] << 12;
+ p1 |= arr[12] << 14;
+
+ p1 |= arr[11] << 6;
+ p1 |= arr[10] << 2;
+ p1 |= arr[9] << 7;
+ p1 |= arr[8] << 1;
+
+ p1 |= arr[7] << 0;
+ p1 |= arr[6] << 8;
+ p1 |= arr[5] << 11;
+ p1 |= arr[4] << 3;
+
+ p1 |= arr[3] << 10;
+ p1 |= arr[2] << 4;
+ p1 |= arr[1] << 5;
+ p1 |= arr[0] << 9;
+ PrintAndLog("Pattern 1 : 0x%X - %d", p1, p1);
+
+ uint16_t sebury1 = id & 0xFFFF;
+ uint8_t sebury2 = (id >> 16) & 0x7F;
+ uint32_t sebury3 = id & 0x7FFFFF;
+ PrintAndLog("Pattern Sebury : %d %d %d (hex: %X %X %X)", sebury1, sebury2, sebury3, sebury1, sebury2, sebury3);
+ }
+ }
+ return;
}
int AskEm410xDemod(const char *Cmd, uint32_t *hi, uint64_t *lo)
{
- int ans = ASKmanDemod(Cmd, FALSE, FALSE);
- if (!ans) return 0;
+ int ans = ASKmanDemod(Cmd, FALSE, FALSE);
+ if (!ans) return 0;
- size_t idx=0;
- if (Em410xDecode(DemodBuffer,(size_t *) &DemodBufferLen, &idx, hi, lo)){
- if (g_debugMode){
- PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, DemodBufferLen);
- printDemodBuff();
- }
- return 1;
- }
- return 0;
+ size_t idx=0;
+ if (Em410xDecode(DemodBuffer,(size_t *) &DemodBufferLen, &idx, hi, lo)){
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, DemodBufferLen);
+ printDemodBuff();
+ }
+ return 1;
+ }
+ return 0;
}
//by marshmellow
//takes 3 arguments - clock, invert and maxErr as integers
//prints binary found and saves in graphbuffer for further commands
int CmdAskEM410xDemod(const char *Cmd)
{
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: data askem410xdemod [clock] <0|1> [maxError]");
- PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
- PrintAndLog(" <invert>, 1 for invert output");
- PrintAndLog(" [set maximum allowed errors], default = 100.");
- PrintAndLog("");
- PrintAndLog(" sample: data askem410xdemod = demod an EM410x Tag ID from GraphBuffer");
- PrintAndLog(" : data askem410xdemod 32 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32");
- PrintAndLog(" : data askem410xdemod 32 1 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32 and inverting data");
- PrintAndLog(" : data askem410xdemod 1 = demod an EM410x Tag ID from GraphBuffer while inverting data");
- PrintAndLog(" : data askem410xdemod 64 1 0 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/64 and inverting data and allowing 0 demod errors");
- return 0;
- }
- uint32_t hi = 0;
- uint64_t lo = 0;
- if (AskEm410xDemod(Cmd, &hi, &lo)) {
- PrintAndLog("EM410x pattern found: ");
- printEM410x(hi, lo);
- return 1;
- }
- return 0;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data askem410xdemod [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data askem410xdemod = demod an EM410x Tag ID from GraphBuffer");
+ PrintAndLog(" : data askem410xdemod 32 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data askem410xdemod 32 1 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data askem410xdemod 1 = demod an EM410x Tag ID from GraphBuffer while inverting data");
+ PrintAndLog(" : data askem410xdemod 64 1 0 = demod an EM410x Tag ID from GraphBuffer using a clock of RF/64 and inverting data and allowing 0 demod errors");
+ return 0;
+ }
+ uint32_t hi = 0;
+ uint64_t lo = 0;
+ if (AskEm410xDemod(Cmd, &hi, &lo)) {
+ PrintAndLog("EM410x pattern found: ");
+ printEM410x(hi, lo);
+ return 1;
+ }
+ return 0;
}
int ASKmanDemod(const char *Cmd, bool verbose, bool emSearch)
{
- int invert=0;
- int clk=0;
- int maxErr=100;
-
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
- if (invert != 0 && invert != 1) {
- PrintAndLog("Invalid argument: %s", Cmd);
- return 0;
- }
- if (clk==1){
- invert=1;
- clk=0;
- }
- size_t BitLen = getFromGraphBuf(BitStream);
- if (g_debugMode==1) PrintAndLog("DEBUG: Bitlen from grphbuff: %d",BitLen);
- if (BitLen==0) return 0;
- int errCnt=0;
- errCnt = askmandemod(BitStream, &BitLen, &clk, &invert, maxErr);
- if (errCnt<0||BitLen<16){ //if fatal error (or -1)
- if (g_debugMode==1) PrintAndLog("no data found %d, errors:%d, bitlen:%d, clock:%d",errCnt,invert,BitLen,clk);
- return 0;
- }
- if (verbose || g_debugMode) PrintAndLog("\nUsing Clock: %d - Invert: %d - Bits Found: %d",clk,invert,BitLen);
-
- //output
- if (errCnt>0){
- if (verbose || g_debugMode) PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
- }
- if (verbose || g_debugMode) PrintAndLog("ASK/Manchester decoded bitstream:");
- // Now output the bitstream to the scrollback by line of 16 bits
- setDemodBuf(BitStream,BitLen,0);
- if (verbose || g_debugMode) printDemodBuff();
- uint64_t lo =0;
- uint32_t hi =0;
- size_t idx=0;
- if (emSearch){
- if (Em410xDecode(BitStream, &BitLen, &idx, &hi, &lo)){
- //set GraphBuffer for clone or sim command
- setDemodBuf(BitStream, BitLen, idx);
- if (g_debugMode){
- PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, BitLen);
- printDemodBuff();
- }
- if (verbose) PrintAndLog("EM410x pattern found: ");
- if (verbose) printEM410x(hi, lo);
- return 1;
- }
- }
- return 1;
+ int invert=0;
+ int clk=0;
+ int maxErr=100;
+
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
+ if (invert != 0 && invert != 1) {
+ PrintAndLog("Invalid argument: %s", Cmd);
+ return 0;
+ }
+ if (clk==1){
+ invert=1;
+ clk=0;
+ }
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (g_debugMode==1) PrintAndLog("DEBUG: Bitlen from grphbuff: %d",BitLen);
+ if (BitLen==0) return 0;
+ int errCnt=0;
+ errCnt = askmandemod(BitStream, &BitLen, &clk, &invert, maxErr);
+ if (errCnt<0||BitLen<16){ //if fatal error (or -1)
+ if (g_debugMode==1) PrintAndLog("no data found %d, errors:%d, bitlen:%d, clock:%d",errCnt,invert,BitLen,clk);
+ return 0;
+ }
+ if (verbose || g_debugMode) PrintAndLog("\nUsing Clock: %d - Invert: %d - Bits Found: %d",clk,invert,BitLen);
+
+ //output
+ if (errCnt>0){
+ if (verbose || g_debugMode) PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
+ }
+ if (verbose || g_debugMode) PrintAndLog("ASK/Manchester decoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ setDemodBuf(BitStream,BitLen,0);
+ if (verbose || g_debugMode) printDemodBuff();
+ uint64_t lo =0;
+ uint32_t hi =0;
+ size_t idx=0;
+ if (emSearch){
+ if (Em410xDecode(BitStream, &BitLen, &idx, &hi, &lo)){
+ //set GraphBuffer for clone or sim command
+ setDemodBuf(BitStream, BitLen, idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
+ if (verbose) PrintAndLog("EM410x pattern found: ");
+ if (verbose) printEM410x(hi, lo);
+ return 1;
+ }
+ }
+ return 1;
}
//by marshmellow
//prints binary found and saves in graphbuffer for further commands
int Cmdaskmandemod(const char *Cmd)
{
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: data rawdemod am [clock] <0|1> [maxError]");
- PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
- PrintAndLog(" <invert>, 1 for invert output");
- PrintAndLog(" [set maximum allowed errors], default = 100.");
- PrintAndLog("");
- PrintAndLog(" sample: data rawdemod am = demod an ask/manchester tag from GraphBuffer");
- PrintAndLog(" : data rawdemod am 32 = demod an ask/manchester tag from GraphBuffer using a clock of RF/32");
- PrintAndLog(" : data rawdemod am 32 1 = demod an ask/manchester tag from GraphBuffer using a clock of RF/32 and inverting data");
- PrintAndLog(" : data rawdemod am 1 = demod an ask/manchester tag from GraphBuffer while inverting data");
- PrintAndLog(" : data rawdemod am 64 1 0 = demod an ask/manchester tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
- return 0;
- }
- return ASKmanDemod(Cmd, TRUE, TRUE);
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod am [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod am = demod an ask/manchester tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod am 32 = demod an ask/manchester tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod am 32 1 = demod an ask/manchester tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod am 1 = demod an ask/manchester tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod am 64 1 0 = demod an ask/manchester tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ return 0;
+ }
+ return ASKmanDemod(Cmd, TRUE, TRUE);
}
//by marshmellow
//stricktly take 10 and 01 and convert to 0 and 1
int Cmdmandecoderaw(const char *Cmd)
{
- int i =0;
- int errCnt=0;
- size_t size=0;
- size_t maxErr = 20;
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: data manrawdecode");
- PrintAndLog(" Takes 10 and 01 and converts to 0 and 1 respectively");
- PrintAndLog(" --must have binary sequence in demodbuffer (run data askrawdemod first)");
- PrintAndLog("");
- PrintAndLog(" sample: data manrawdecode = decode manchester bitstream from the demodbuffer");
- return 0;
- }
- if (DemodBufferLen==0) return 0;
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- int high=0,low=0;
- for (;i<DemodBufferLen;++i){
- if (DemodBuffer[i]>high) high=DemodBuffer[i];
- else if(DemodBuffer[i]<low) low=DemodBuffer[i];
- BitStream[i]=DemodBuffer[i];
- }
- if (high>1 || low <0 ){
- PrintAndLog("Error: please raw demod the wave first then mancheseter raw decode");
- return 0;
- }
- size=i;
- errCnt=manrawdecode(BitStream, &size);
- if (errCnt>=maxErr){
- PrintAndLog("Too many errors: %d",errCnt);
- return 0;
- }
- PrintAndLog("Manchester Decoded - # errors:%d - data:",errCnt);
- printBitStream(BitStream, size);
- if (errCnt==0){
- uint64_t id = 0;
- uint32_t hi = 0;
- size_t idx=0;
- if (Em410xDecode(BitStream, &size, &idx, &hi, &id)){
- //need to adjust to set bitstream back to manchester encoded data
- //setDemodBuf(BitStream, size, idx);
-
- printEM410x(hi, id);
- }
- }
- return 1;
+ int i =0;
+ int errCnt=0;
+ size_t size=0;
+ size_t maxErr = 20;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data manrawdecode");
+ PrintAndLog(" Takes 10 and 01 and converts to 0 and 1 respectively");
+ PrintAndLog(" --must have binary sequence in demodbuffer (run data askrawdemod first)");
+ PrintAndLog("");
+ PrintAndLog(" sample: data manrawdecode = decode manchester bitstream from the demodbuffer");
+ return 0;
+ }
+ if (DemodBufferLen==0) return 0;
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ int high=0,low=0;
+ for (;i<DemodBufferLen;++i){
+ if (DemodBuffer[i]>high) high=DemodBuffer[i];
+ else if(DemodBuffer[i]<low) low=DemodBuffer[i];
+ BitStream[i]=DemodBuffer[i];
+ }
+ if (high>1 || low <0 ){
+ PrintAndLog("Error: please raw demod the wave first then mancheseter raw decode");
+ return 0;
+ }
+ size=i;
+ errCnt=manrawdecode(BitStream, &size);
+ if (errCnt>=maxErr){
+ PrintAndLog("Too many errors: %d",errCnt);
+ return 0;
+ }
+ PrintAndLog("Manchester Decoded - # errors:%d - data:",errCnt);
+ printBitStream(BitStream, size);
+ if (errCnt==0){
+ uint64_t id = 0;
+ uint32_t hi = 0;
+ size_t idx=0;
+ if (Em410xDecode(BitStream, &size, &idx, &hi, &id)){
+ //need to adjust to set bitstream back to manchester encoded data
+ //setDemodBuf(BitStream, size, idx);
+
+ printEM410x(hi, id);
+ }
+ }
+ return 1;
}
//by marshmellow
PrintAndLog("Usage: data biphaserawdecode [offset] [invert] [maxErr]");
PrintAndLog(" Converts 10 or 01 to 1 and 11 or 00 to 0");
PrintAndLog(" --must have binary sequence in demodbuffer (run data askrawdemod first)");
- PrintAndLog(" --invert for Conditional Dephase Encoding (CDP) AKA Differential Manchester");
+ PrintAndLog(" --invert for Conditional Dephase Encoding (CDP) AKA Differential Manchester");
PrintAndLog("");
PrintAndLog(" [offset <0|1>], set to 0 not to adjust start position or to 1 to adjust decode start position");
PrintAndLog(" [invert <0|1>], set to 1 to invert output");
// set demod buffer back to raw after biphase demod
void setBiphasetoRawDemodBuf(uint8_t *BitStream, size_t size)
{
- uint8_t rawStream[512]={0x00};
- size_t i=0;
- uint8_t curPhase=0;
- if (size > 256) {
- PrintAndLog("ERROR - Biphase Demod Buffer overrun");
- return;
- }
- for (size_t idx=0; idx<size; idx++){
- if(!BitStream[idx]){
- rawStream[i++] = curPhase;
- rawStream[i++] = curPhase;
- curPhase ^= 1;
- } else {
- rawStream[i++] = curPhase;
- rawStream[i++] = curPhase ^ 1;
- }
- }
- setDemodBuf(rawStream,i,0);
- return;
+ uint8_t rawStream[512]={0x00};
+ size_t i=0;
+ uint8_t curPhase=0;
+ if (size > 256) {
+ PrintAndLog("ERROR - Biphase Demod Buffer overrun");
+ return;
+ }
+ for (size_t idx=0; idx<size; idx++){
+ if(!BitStream[idx]){
+ rawStream[i++] = curPhase;
+ rawStream[i++] = curPhase;
+ curPhase ^= 1;
+ } else {
+ rawStream[i++] = curPhase;
+ rawStream[i++] = curPhase ^ 1;
+ }
+ }
+ setDemodBuf(rawStream,i,0);
+ return;
}
//by marshmellow
//prints binary found and saves in graphbuffer for further commands
int ASKrawDemod(const char *Cmd, bool verbose)
{
- int invert=0;
- int clk=0;
- int maxErr=100;
- uint8_t askAmp = 0;
- char amp = param_getchar(Cmd, 0);
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- sscanf(Cmd, "%i %i %i %c", &clk, &invert, &maxErr, &);
- if (invert != 0 && invert != 1) {
- if (verbose || g_debugMode) PrintAndLog("Invalid argument: %s", Cmd);
- return 0;
- }
- if (clk==1){
- invert=1;
- clk=0;
- }
- if (amp == 'a' || amp == 'A') askAmp=1;
- size_t BitLen = getFromGraphBuf(BitStream);
- if (BitLen==0) return 0;
- int errCnt=0;
- errCnt = askrawdemod(BitStream, &BitLen, &clk, &invert, maxErr, askAmp);
- if (errCnt==-1||BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
- if (verbose || g_debugMode) PrintAndLog("no data found");
- if (g_debugMode) PrintAndLog("errCnt: %d, BitLen: %d, clk: %d, invert: %d", errCnt, BitLen, clk, invert);
- return 0;
- }
- if (verbose || g_debugMode) PrintAndLog("Using Clock: %d - invert: %d - Bits Found: %d", clk, invert, BitLen);
-
- //move BitStream back to DemodBuffer
- setDemodBuf(BitStream,BitLen,0);
-
- //output
- if (errCnt>0 && (verbose || g_debugMode)){
- PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d", errCnt);
- }
- if (verbose || g_debugMode){
- PrintAndLog("ASK demoded bitstream:");
- // Now output the bitstream to the scrollback by line of 16 bits
- printBitStream(BitStream,BitLen);
- }
- return 1;
+ int invert=0;
+ int clk=0;
+ int maxErr=100;
+ uint8_t askAmp = 0;
+ char amp = param_getchar(Cmd, 0);
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ sscanf(Cmd, "%i %i %i %c", &clk, &invert, &maxErr, &);
+ if (invert != 0 && invert != 1) {
+ if (verbose || g_debugMode) PrintAndLog("Invalid argument: %s", Cmd);
+ return 0;
+ }
+ if (clk==1){
+ invert=1;
+ clk=0;
+ }
+ if (amp == 'a' || amp == 'A') askAmp=1;
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+ int errCnt=0;
+ errCnt = askrawdemod(BitStream, &BitLen, &clk, &invert, maxErr, askAmp);
+ if (errCnt==-1||BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
+ if (verbose || g_debugMode) PrintAndLog("no data found");
+ if (g_debugMode) PrintAndLog("errCnt: %d, BitLen: %d, clk: %d, invert: %d", errCnt, BitLen, clk, invert);
+ return 0;
+ }
+ if (verbose || g_debugMode) PrintAndLog("Using Clock: %d - invert: %d - Bits Found: %d", clk, invert, BitLen);
+
+ //move BitStream back to DemodBuffer
+ setDemodBuf(BitStream,BitLen,0);
+
+ //output
+ if (errCnt>0 && (verbose || g_debugMode)){
+ PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d", errCnt);
+ }
+ if (verbose || g_debugMode){
+ PrintAndLog("ASK demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printBitStream(BitStream,BitLen);
+ }
+ return 1;
}
//by marshmellow
//by marshmellow - see ASKbiphaseDemod
int Cmdaskbiphdemod(const char *Cmd)
{
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 12 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: data rawdemod ab [offset] [clock] <invert> [maxError] <amplify>");
- PrintAndLog(" [offset], offset to begin biphase, default=0");
- PrintAndLog(" [set clock as integer] optional, if not set, autodetect");
- PrintAndLog(" <invert>, 1 to invert output");
- PrintAndLog(" [set maximum allowed errors], default = 100");
- PrintAndLog(" <amplify>, 'a' to attempt demod with ask amplification, default = no amp");
- PrintAndLog(" NOTE: <invert> can be entered as second or third argument");
- PrintAndLog(" NOTE: <amplify> can be entered as first, second or last argument");
- PrintAndLog(" NOTE: any other arg must have previous args set to work");
- PrintAndLog("");
- PrintAndLog(" NOTE: --invert for Conditional Dephase Encoding (CDP) AKA Differential Manchester");
- PrintAndLog("");
- PrintAndLog(" sample: data rawdemod ab = demod an ask/biph tag from GraphBuffer");
- PrintAndLog(" : data rawdemod ab a = demod an ask/biph tag from GraphBuffer, amplified");
- PrintAndLog(" : data rawdemod ab 1 32 = demod an ask/biph tag from GraphBuffer using an offset of 1 and a clock of RF/32");
- PrintAndLog(" : data rawdemod ab 0 32 1 = demod an ask/biph tag from GraphBuffer using a clock of RF/32 and inverting data");
- PrintAndLog(" : data rawdemod ab 0 1 = demod an ask/biph tag from GraphBuffer while inverting data");
- PrintAndLog(" : data rawdemod ab 0 64 1 0 = demod an ask/biph tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
- PrintAndLog(" : data rawdemod ab 0 64 1 0 a = demod an ask/biph tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors, and amp");
- return 0;
- }
- return ASKbiphaseDemod(Cmd, TRUE);
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 12 || cmdp == 'h' || cmdp == 'H') {
+
PrintAndLog("Usage: data rawdemod ab [offset] [clock] <invert> [maxError] <amplify>");
+ PrintAndLog(" [offset], offset to begin biphase, default=0");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect");
+ PrintAndLog(" <invert>, 1 to invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100");
+
PrintAndLog(" <amplify>, 'a' to attempt demod with ask amplification, default = no amp");
+ PrintAndLog(" NOTE: <invert> can be entered as second or third argument");
+
PrintAndLog(" NOTE: <amplify> can be entered as first, second or last argument");
+ PrintAndLog(" NOTE: any other arg must have previous args set to work");
+ PrintAndLog("");
+ PrintAndLog(" NOTE: --invert for Conditional Dephase Encoding (CDP) AKA Differential Manchester");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod ab = demod an ask/biph tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod ab a = demod an ask/biph tag from GraphBuffer, amplified");
+ PrintAndLog(" : data rawdemod ab 1 32 = demod an ask/biph tag from GraphBuffer using an offset of 1 and a clock of RF/32");
+ PrintAndLog(" : data rawdemod ab 0 32 1 = demod an ask/biph tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod ab 0 1 = demod an ask/biph tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod ab 0 64 1 0 = demod an ask/biph tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ PrintAndLog(" : data rawdemod ab 0 64 1 0 a = demod an ask/biph tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors, and amp");
+ return 0;
+ }
+ return ASKbiphaseDemod(Cmd, TRUE);
}
//by marshmellow
//if successful it will push askraw data back to demod buffer ready for emulation
int CmdG_Prox_II_Demod(const char *Cmd)
{
- if (!ASKbiphaseDemod(Cmd, FALSE)){
- if (g_debugMode) PrintAndLog("ASKbiphaseDemod failed 1st try");
- return 0;
- }
- size_t size = DemodBufferLen;
- //call lfdemod.c demod for gProxII
- int ans = gProxII_Demod(DemodBuffer, &size);
- if (ans < 0){
- if (g_debugMode) PrintAndLog("Error gProxII_Demod");
- return 0;
- }
- //got a good demod
- uint32_t ByteStream[65] = {0x00};
- uint8_t xorKey=0;
- uint8_t keyCnt=0;
- uint8_t bitCnt=0;
- uint8_t ByteCnt=0;
- size_t startIdx = ans + 6; //start after preamble
- for (size_t idx = 0; idx<size-6; idx++){
- if ((idx+1) % 5 == 0){
- //spacer bit - should be 0
- if (DemodBuffer[startIdx+idx] != 0) {
- if (g_debugMode) PrintAndLog("Error spacer not 0: %d, pos: %d",DemodBuffer[startIdx+idx],startIdx+idx);
- return 0;
- }
- continue;
- }
- if (keyCnt<8){ //lsb first
- xorKey = xorKey | (DemodBuffer[startIdx+idx]<<keyCnt);
- keyCnt++;
- if (keyCnt==8 && g_debugMode) PrintAndLog("xorKey Found: %02x", xorKey);
- continue;
- }
- //lsb first
- ByteStream[ByteCnt] = ByteStream[ByteCnt] | (DemodBuffer[startIdx+idx]<<bitCnt);
- bitCnt++;
- if (bitCnt % 8 == 0){
- if (g_debugMode) PrintAndLog("byte %d: %02x",ByteCnt,ByteStream[ByteCnt]);
- bitCnt=0;
- ByteCnt++;
- }
- }
- for (uint8_t i = 0; i < ByteCnt; i++){
- ByteStream[i] ^= xorKey; //xor
- if (g_debugMode) PrintAndLog("byte %d after xor: %02x", i, ByteStream[i]);
- }
- //now ByteStream contains 64 bytes of decrypted raw tag data
- //
- uint8_t fmtLen = ByteStream[0]>>2;
- uint32_t FC = 0;
- uint32_t Card = 0;
- uint32_t raw1 = bytebits_to_byte(DemodBuffer+ans,32);
- uint32_t raw2 = bytebits_to_byte(DemodBuffer+ans+32, 32);
- uint32_t raw3 = bytebits_to_byte(DemodBuffer+ans+64, 32);
-
- if (fmtLen==36){
- FC = ((ByteStream[3] & 0x7F)<<7) | (ByteStream[4]>>1);
- Card = ((ByteStream[4]&1)<<19) | (ByteStream[5]<<11) | (ByteStream[6]<<3) | (ByteStream[7]>>5);
- PrintAndLog("G-Prox-II Found: FmtLen %d, FC %d, Card %d",fmtLen,FC,Card);
- } else if(fmtLen==26){
- FC = ((ByteStream[3] & 0x7F)<<1) | (ByteStream[4]>>7);
- Card = ((ByteStream[4]&0x7F)<<9) | (ByteStream[5]<<1) | (ByteStream[6]>>7);
- PrintAndLog("G-Prox-II Found: FmtLen %d, FC %d, Card %d",fmtLen,FC,Card);
- } else {
- PrintAndLog("Unknown G-Prox-II Fmt Found: FmtLen %d",fmtLen);
- }
- PrintAndLog("Raw: %08x%08x%08x", raw1,raw2,raw3);
- setDemodBuf(DemodBuffer+ans, 96, 0);
- return 1;
+ if (!ASKbiphaseDemod(Cmd, FALSE)){
+ if (g_debugMode) PrintAndLog("ASKbiphaseDemod failed 1st try");
+ return 0;
+ }
+ size_t size = DemodBufferLen;
+ //call lfdemod.c demod for gProxII
+ int ans = gProxII_Demod(DemodBuffer, &size);
+ if (ans < 0){
+ if (g_debugMode) PrintAndLog("Error gProxII_Demod");
+ return 0;
+ }
+ //got a good demod
+ uint32_t ByteStream[65] = {0x00};
+ uint8_t xorKey=0;
+ uint8_t keyCnt=0;
+ uint8_t bitCnt=0;
+ uint8_t ByteCnt=0;
+ size_t startIdx = ans + 6; //start after preamble
+ for (size_t idx = 0; idx<size-6; idx++){
+ if ((idx+1) % 5 == 0){
+ //spacer bit - should be 0
+ if (DemodBuffer[startIdx+idx] != 0) {
+ if (g_debugMode) PrintAndLog("Error spacer not 0: %d, pos: %d",DemodBuffer[startIdx+idx],startIdx+idx);
+ return 0;
+ }
+ continue;
+ }
+ if (keyCnt<8){ //lsb first
+ xorKey = xorKey | (DemodBuffer[startIdx+idx]<<keyCnt);
+ keyCnt++;
+ if (keyCnt==8 && g_debugMode) PrintAndLog("xorKey Found: %02x", xorKey);
+ continue;
+ }
+ //lsb first
+ ByteStream[ByteCnt] = ByteStream[ByteCnt] | (DemodBuffer[startIdx+idx]<<bitCnt);
+ bitCnt++;
+ if (bitCnt % 8 == 0){
+ if (g_debugMode) PrintAndLog("byte %d: %02x",ByteCnt,ByteStream[ByteCnt]);
+ bitCnt=0;
+ ByteCnt++;
+ }
+ }
+ for (uint8_t i = 0; i < ByteCnt; i++){
+ ByteStream[i] ^= xorKey; //xor
+ if (g_debugMode) PrintAndLog("byte %d after xor: %02x", i, ByteStream[i]);
+ }
+ //now ByteStream contains 64 bytes of decrypted raw tag data
+ //
+ uint8_t fmtLen = ByteStream[0]>>2;
+ uint32_t FC = 0;
+ uint32_t Card = 0;
+ uint32_t raw1 = bytebits_to_byte(DemodBuffer+ans,32);
+ uint32_t raw2 = bytebits_to_byte(DemodBuffer+ans+32, 32);
+ uint32_t raw3 = bytebits_to_byte(DemodBuffer+ans+64, 32);
+
+ if (fmtLen==36){
+ FC = ((ByteStream[3] & 0x7F)<<7) | (ByteStream[4]>>1);
+ Card = ((ByteStream[4]&1)<<19) | (ByteStream[5]<<11) | (ByteStream[6]<<3) | (ByteStream[7]>>5);
+ PrintAndLog("G-Prox-II Found: FmtLen %d, FC %d, Card %d",fmtLen,FC,Card);
+ } else if(fmtLen==26){
+ FC = ((ByteStream[3] & 0x7F)<<1) | (ByteStream[4]>>7);
+ Card = ((ByteStream[4]&0x7F)<<9) | (ByteStream[5]<<1) | (ByteStream[6]>>7);
+ PrintAndLog("G-Prox-II Found: FmtLen %d, FC %d, Card %d",fmtLen,FC,Card);
+ } else {
+ PrintAndLog("Unknown G-Prox-II Fmt Found: FmtLen %d",fmtLen);
+ }
+ PrintAndLog("Raw: %08x%08x%08x", raw1,raw2,raw3);
+ setDemodBuf(DemodBuffer+ans, 96, 0);
+ return 1;
}
//by marshmellow - see ASKrawDemod
int Cmdaskrawdemod(const char *Cmd)
{
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 12 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: data rawdemod ar [clock] <invert> [maxError] [amplify]");
- PrintAndLog(" [set clock as integer] optional, if not set, autodetect");
- PrintAndLog(" <invert>, 1 to invert output");
- PrintAndLog(" [set maximum allowed errors], default = 100");
- PrintAndLog(" <amplify>, 'a' to attempt demod with ask amplification, default = no amp");
- PrintAndLog("");
- PrintAndLog(" sample: data rawdemod ar = demod an ask tag from GraphBuffer");
- PrintAndLog(" : data rawdemod ar a = demod an ask tag from GraphBuffer, amplified");
- PrintAndLog(" : data rawdemod ar 32 = demod an ask tag from GraphBuffer using a clock of RF/32");
- PrintAndLog(" : data rawdemod ar 32 1 = demod an ask tag from GraphBuffer using a clock of RF/32 and inverting data");
- PrintAndLog(" : data rawdemod ar 1 = demod an ask tag from GraphBuffer while inverting data");
- PrintAndLog(" : data rawdemod ar 64 1 0 = demod an ask tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
- PrintAndLog(" : data rawdemod ar 64 1 0 a = demod an ask tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors, and amp");
- return 0;
- }
- return ASKrawDemod(Cmd, TRUE);
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 12 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod ar [clock] <invert> [maxError] [amplify]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect");
+ PrintAndLog(" <invert>, 1 to invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100");
+
PrintAndLog(" <amplify>, 'a' to attempt demod with ask amplification, default = no amp");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod ar = demod an ask tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod ar a = demod an ask tag from GraphBuffer, amplified");
+ PrintAndLog(" : data rawdemod ar 32 = demod an ask tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod ar 32 1 = demod an ask tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod ar 1 = demod an ask tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod ar 64 1 0 = demod an ask tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ PrintAndLog(" : data rawdemod ar 64 1 0 a = demod an ask tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors, and amp");
+ return 0;
+ }
+ return ASKrawDemod(Cmd, TRUE);
}
int AutoCorrelate(int window, bool SaveGrph, bool verbose)
{
- static int CorrelBuffer[MAX_GRAPH_TRACE_LEN];
- size_t Correlation = 0;
- int maxSum = 0;
- int lastMax = 0;
- if (verbose) PrintAndLog("performing %d correlations", GraphTraceLen - window);
- for (int i = 0; i < GraphTraceLen - window; ++i) {
- int sum = 0;
- for (int j = 0; j < window; ++j) {
- sum += (GraphBuffer[j]*GraphBuffer[i + j]) / 256;
- }
- CorrelBuffer[i] = sum;
- if (sum >= maxSum-100 && sum <= maxSum+100){
- //another max
- Correlation = i-lastMax;
- lastMax = i;
- if (sum > maxSum) maxSum = sum;
- } else if (sum > maxSum){
- maxSum=sum;
- lastMax = i;
- }
- }
- if (Correlation==0){
- //try again with wider margin
- for (int i = 0; i < GraphTraceLen - window; i++){
- if (CorrelBuffer[i] >= maxSum-(maxSum*0.05) && CorrelBuffer[i] <= maxSum+(maxSum*0.05)){
- //another max
- Correlation = i-lastMax;
- lastMax = i;
- //if (CorrelBuffer[i] > maxSum) maxSum = sum;
- }
- }
- }
- if (verbose && Correlation > 0) PrintAndLog("Possible Correlation: %d samples",Correlation);
-
- if (SaveGrph){
- GraphTraceLen = GraphTraceLen - window;
- memcpy(GraphBuffer, CorrelBuffer, GraphTraceLen * sizeof (int));
- RepaintGraphWindow();
- }
- return Correlation;
+ static int CorrelBuffer[MAX_GRAPH_TRACE_LEN];
+ size_t Correlation = 0;
+ int maxSum = 0;
+ int lastMax = 0;
+ if (verbose) PrintAndLog("performing %d correlations", GraphTraceLen - window);
+ for (int i = 0; i < GraphTraceLen - window; ++i) {
+ int sum = 0;
+ for (int j = 0; j < window; ++j) {
+ sum += (GraphBuffer[j]*GraphBuffer[i + j]) / 256;
+ }
+ CorrelBuffer[i] = sum;
+ if (sum >= maxSum-100 && sum <= maxSum+100){
+ //another max
+ Correlation = i-lastMax;
+ lastMax = i;
+ if (sum > maxSum) maxSum = sum;
+ } else if (sum > maxSum){
+ maxSum=sum;
+ lastMax = i;
+ }
+ }
+ if (Correlation==0){
+ //try again with wider margin
+ for (int i = 0; i < GraphTraceLen - window; i++){
+ if (CorrelBuffer[i] >= maxSum-(maxSum*0.05) && CorrelBuffer[i] <= maxSum+(maxSum*0.05)){
+ //another max
+ Correlation = i-lastMax;
+ lastMax = i;
+ //if (CorrelBuffer[i] > maxSum) maxSum = sum;
+ }
+ }
+ }
+ if (verbose && Correlation > 0) PrintAndLog("Possible Correlation: %d samples",Correlation);
+
+ if (SaveGrph){
+ GraphTraceLen = GraphTraceLen - window;
+ memcpy(GraphBuffer, CorrelBuffer, GraphTraceLen * sizeof (int));
+ RepaintGraphWindow();
+ }
+ return Correlation;
}
int usage_data_autocorr(void)
{
- //print help
- PrintAndLog("Usage: data autocorr [window] [g]");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" [window] window length for correlation - default = 4000");
- PrintAndLog(" g save back to GraphBuffer (overwrite)");
- return 0;
+ //print help
+ PrintAndLog("Usage: data autocorr [window] [g]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" [window] window length for correlation - default = 4000");
+ PrintAndLog(" g save back to GraphBuffer (overwrite)");
+ return 0;
}
int CmdAutoCorr(const char *Cmd)
{
- char cmdp = param_getchar(Cmd, 0);
- if (cmdp == 'h' || cmdp == 'H')
- return usage_data_autocorr();
- int window = 4000; //set default
- char grph=0;
- bool updateGrph = FALSE;
- sscanf(Cmd, "%i %c", &window, &grph);
-
- if (window >= GraphTraceLen) {
- PrintAndLog("window must be smaller than trace (%d samples)",
- GraphTraceLen);
- return 0;
- }
- if (grph == 'g') updateGrph=TRUE;
- return AutoCorrelate(window, updateGrph, TRUE);
+ char cmdp = param_getchar(Cmd, 0);
+ if (cmdp == 'h' || cmdp == 'H')
+ return usage_data_autocorr();
+ int window = 4000; //set default
+ char grph=0;
+ bool updateGrph = FALSE;
+ sscanf(Cmd, "%i %c", &window, &grph);
+
+ if (window >= GraphTraceLen) {
+ PrintAndLog("window must be smaller than trace (%d samples)",
+ GraphTraceLen);
+ return 0;
+ }
+ if (grph == 'g') updateGrph=TRUE;
+ return AutoCorrelate(window, updateGrph, TRUE);
}
int CmdBitsamples(const char *Cmd)
{
- int cnt = 0;
- uint8_t got[12288];
+ int cnt = 0;
+ uint8_t got[12288];
- GetFromBigBuf(got,sizeof(got),0);
- WaitForResponse(CMD_ACK,NULL);
+ GetFromBigBuf(got,sizeof(got),0);
+ WaitForResponse(CMD_ACK,NULL);
- for (int j = 0; j < sizeof(got); j++) {
- for (int k = 0; k < 8; k++) {
- if(got[j] & (1 << (7 - k))) {
- GraphBuffer[cnt++] = 1;
- } else {
- GraphBuffer[cnt++] = 0;
- }
- }
- }
- GraphTraceLen = cnt;
- RepaintGraphWindow();
- return 0;
+ for (int j = 0; j < sizeof(got); j++) {
+ for (int k = 0; k < 8; k++) {
+ if(got[j] & (1 << (7 - k))) {
+ GraphBuffer[cnt++] = 1;
+ } else {
+ GraphBuffer[cnt++] = 0;
+ }
+ }
+ }
+ GraphTraceLen = cnt;
+ RepaintGraphWindow();
+ return 0;
}
/*
*/
int CmdBitstream(const char *Cmd)
{
- int i, j;
- int bit;
- int gtl;
- int clock;
- int low = 0;
- int high = 0;
- int hithigh, hitlow, first;
-
- /* Detect high and lows and clock */
- for (i = 0; i < GraphTraceLen; ++i)
- {
- if (GraphBuffer[i] > high)
- high = GraphBuffer[i];
- else if (GraphBuffer[i] < low)
- low = GraphBuffer[i];
- }
-
- /* Get our clock */
- clock = GetAskClock(Cmd, high, 1);
- gtl = ClearGraph(0);
-
- bit = 0;
- for (i = 0; i < (int)(gtl / clock); ++i)
- {
- hithigh = 0;
- hitlow = 0;
- first = 1;
- /* Find out if we hit both high and low peaks */
- for (j = 0; j < clock; ++j)
- {
- if (GraphBuffer[(i * clock) + j] == high)
- hithigh = 1;
- else if (GraphBuffer[(i * clock) + j] == low)
- hitlow = 1;
- /* it doesn't count if it's the first part of our read
- because it's really just trailing from the last sequence */
- if (first && (hithigh || hitlow))
- hithigh = hitlow = 0;
- else
- first = 0;
-
- if (hithigh && hitlow)
- break;
- }
-
- /* If we didn't hit both high and low peaks, we had a bit transition */
- if (!hithigh || !hitlow)
- bit ^= 1;
-
- AppendGraph(0, clock, bit);
- }
-
- RepaintGraphWindow();
- return 0;
+ int i, j;
+ int bit;
+ int gtl;
+ int clock;
+ int low = 0;
+ int high = 0;
+ int hithigh, hitlow, first;
+
+ /* Detect high and lows and clock */
+ for (i = 0; i < GraphTraceLen; ++i)
+ {
+ if (GraphBuffer[i] > high)
+ high = GraphBuffer[i];
+ else if (GraphBuffer[i] < low)
+ low = GraphBuffer[i];
+ }
+
+ /* Get our clock */
+ clock = GetAskClock(Cmd, high, 1);
+ gtl = ClearGraph(0);
+
+ bit = 0;
+ for (i = 0; i < (int)(gtl / clock); ++i)
+ {
+ hithigh = 0;
+ hitlow = 0;
+ first = 1;
+ /* Find out if we hit both high and low peaks */
+ for (j = 0; j < clock; ++j)
+ {
+ if (GraphBuffer[(i * clock) + j] == high)
+ hithigh = 1;
+ else if (GraphBuffer[(i * clock) + j] == low)
+ hitlow = 1;
+ /* it doesn't count if it's the first part of our read
+ because it's really just trailing from the last sequence */
+ if (first && (hithigh || hitlow))
+ hithigh = hitlow = 0;
+ else
+ first = 0;
+
+ if (hithigh && hitlow)
+ break;
+ }
+
+ /* If we didn't hit both high and low peaks, we had a bit transition */
+ if (!hithigh || !hitlow)
+ bit ^= 1;
+
+ AppendGraph(0, clock, bit);
+ }
+
+ RepaintGraphWindow();
+ return 0;
}
int CmdBuffClear(const char *Cmd)
{
- UsbCommand c = {CMD_BUFF_CLEAR};
- SendCommand(&c);
- ClearGraph(true);
- return 0;
+ UsbCommand c = {CMD_BUFF_CLEAR};
+ SendCommand(&c);
+ ClearGraph(true);
+ return 0;
}
int CmdDec(const char *Cmd)
{
- for (int i = 0; i < (GraphTraceLen / 2); ++i)
- GraphBuffer[i] = GraphBuffer[i * 2];
- GraphTraceLen /= 2;
- PrintAndLog("decimated by 2");
- RepaintGraphWindow();
- return 0;
+ for (int i = 0; i < (GraphTraceLen / 2); ++i)
+ GraphBuffer[i] = GraphBuffer[i * 2];
+ GraphTraceLen /= 2;
+ PrintAndLog("decimated by 2");
+ RepaintGraphWindow();
+ return 0;
}
/**
* Undecimate - I'd call it 'interpolate', but we'll save that
int CmdGraphShiftZero(const char *Cmd)
{
- int shift=0;
- //set options from parameters entered with the command
- sscanf(Cmd, "%i", &shift);
- int shiftedVal=0;
- for(int i = 0; i<GraphTraceLen; i++){
- shiftedVal=GraphBuffer[i]+shift;
- if (shiftedVal>127)
- shiftedVal=127;
- else if (shiftedVal<-127)
- shiftedVal=-127;
- GraphBuffer[i]= shiftedVal;
- }
- CmdNorm("");
- return 0;
+ int shift=0;
+ //set options from parameters entered with the command
+ sscanf(Cmd, "%i", &shift);
+ int shiftedVal=0;
+ for(int i = 0; i<GraphTraceLen; i++){
+ shiftedVal=GraphBuffer[i]+shift;
+ if (shiftedVal>127)
+ shiftedVal=127;
+ else if (shiftedVal<-127)
+ shiftedVal=-127;
+ GraphBuffer[i]= shiftedVal;
+ }
+ CmdNorm("");
+ return 0;
}
//by marshmellow
//takes a threshold length which is the measured length between two samples then determines an edge
int CmdAskEdgeDetect(const char *Cmd)
{
- int thresLen = 25;
- sscanf(Cmd, "%i", &thresLen);
- int shift = 127;
- int shiftedVal=0;
- for(int i = 1; i<GraphTraceLen; i++){
- if (GraphBuffer[i]-GraphBuffer[i-1]>=thresLen) //large jump up
- shift=127;
- else if(GraphBuffer[i]-GraphBuffer[i-1]<=-1*thresLen) //large jump down
- shift=-127;
-
- shiftedVal=GraphBuffer[i]+shift;
-
- if (shiftedVal>127)
- shiftedVal=127;
- else if (shiftedVal<-127)
- shiftedVal=-127;
- GraphBuffer[i-1] = shiftedVal;
- }
- RepaintGraphWindow();
- //CmdNorm("");
- return 0;
+ int thresLen = 25;
+ sscanf(Cmd, "%i", &thresLen);
+ int shift = 127;
+ int shiftedVal=0;
+ for(int i = 1; i<GraphTraceLen; i++){
+ if (GraphBuffer[i]-GraphBuffer[i-1]>=thresLen) //large jump up
+ shift=127;
+ else if(GraphBuffer[i]-GraphBuffer[i-1]<=-1*thresLen) //large jump down
+ shift=-127;
+
+ shiftedVal=GraphBuffer[i]+shift;
+
+ if (shiftedVal>127)
+ shiftedVal=127;
+ else if (shiftedVal<-127)
+ shiftedVal=-127;
+ GraphBuffer[i-1] = shiftedVal;
+ }
+ RepaintGraphWindow();
+ //CmdNorm("");
+ return 0;
}
/* Print our clock rate */
//defaults: clock = 50, invert=1, fchigh=10, fclow=8 (RF/10 RF/8 (fsk2a))
int FSKrawDemod(const char *Cmd, bool verbose)
{
- //raw fsk demod no manchester decoding no start bit finding just get binary from wave
- //set defaults
- int rfLen = 0;
- int invert = 0;
- int fchigh = 0;
- int fclow = 0;
-
- //set options from parameters entered with the command
- sscanf(Cmd, "%i %i %i %i", &rfLen, &invert, &fchigh, &fclow);
-
- if (strlen(Cmd)>0 && strlen(Cmd)<=2) {
- if (rfLen==1){
- invert=1; //if invert option only is used
- rfLen = 0;
- }
- }
-
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
- if (BitLen==0) return 0;
- //get field clock lengths
- uint16_t fcs=0;
- uint8_t dummy=0;
- if (fchigh==0 || fclow == 0){
- fcs = countFC(BitStream, BitLen, &dummy);
- if (fcs==0){
- fchigh=10;
- fclow=8;
- }else{
- fchigh = (fcs >> 8) & 0xFF;
- fclow = fcs & 0xFF;
- }
- }
- //get bit clock length
- if (rfLen==0){
- rfLen = detectFSKClk(BitStream, BitLen, fchigh, fclow);
- if (rfLen == 0) rfLen = 50;
- }
- if (verbose) PrintAndLog("Args invert: %d - Clock:%d - fchigh:%d - fclow: %d",invert,rfLen,fchigh, fclow);
- int size = fskdemod(BitStream,BitLen,(uint8_t)rfLen,(uint8_t)invert,(uint8_t)fchigh,(uint8_t)fclow);
- if (size>0){
- setDemodBuf(BitStream,size,0);
-
- // Now output the bitstream to the scrollback by line of 16 bits
- if(size > (8*32)+2) size = (8*32)+2; //only output a max of 8 blocks of 32 bits most tags will have full bit stream inside that sample size
- if (verbose) {
- PrintAndLog("FSK decoded bitstream:");
- printBitStream(BitStream,size);
- }
-
- return 1;
- } else{
- if (verbose) PrintAndLog("no FSK data found");
- }
- return 0;
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ //set defaults
+ int rfLen = 0;
+ int invert = 0;
+ int fchigh = 0;
+ int fclow = 0;
+
+ //set options from parameters entered with the command
+ sscanf(Cmd, "%i %i %i %i", &rfLen, &invert, &fchigh, &fclow);
+
+ if (strlen(Cmd)>0 && strlen(Cmd)<=2) {
+ if (rfLen==1){
+ invert=1; //if invert option only is used
+ rfLen = 0;
+ }
+ }
+
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+ //get field clock lengths
+ uint16_t fcs=0;
+ uint8_t dummy=0;
+ if (fchigh==0 || fclow == 0){
+ fcs = countFC(BitStream, BitLen, &dummy);
+ if (fcs==0){
+ fchigh=10;
+ fclow=8;
+ }else{
+ fchigh = (fcs >> 8) & 0xFF;
+ fclow = fcs & 0xFF;
+ }
+ }
+ //get bit clock length
+ if (rfLen==0){
+ rfLen = detectFSKClk(BitStream, BitLen, fchigh, fclow);
+ if (rfLen == 0) rfLen = 50;
+ }
+ if (verbose) PrintAndLog("Args invert: %d - Clock:%d - fchigh:%d - fclow: %d",invert,rfLen,fchigh, fclow);
+ int size = fskdemod(BitStream,BitLen,(uint8_t)rfLen,(uint8_t)invert,(uint8_t)fchigh,(uint8_t)fclow);
+ if (size>0){
+ setDemodBuf(BitStream,size,0);
+
+ // Now output the bitstream to the scrollback by line of 16 bits
+ if(size > (8*32)+2) size = (8*32)+2; //only output a max of 8 blocks of 32 bits most tags will have full bit stream inside that sample size
+ if (verbose) {
+ PrintAndLog("FSK decoded bitstream:");
+ printBitStream(BitStream,size);
+ }
+
+ return 1;
+ } else{
+ if (verbose) PrintAndLog("no FSK data found");
+ }
+ return 0;
}
//by marshmellow
//defaults: clock = 50, invert=1, fchigh=10, fclow=8 (RF/10 RF/8 (fsk2a))
int CmdFSKrawdemod(const char *Cmd)
{
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: data rawdemod fs [clock] <invert> [fchigh] [fclow]");
- PrintAndLog(" [set clock as integer] optional, omit for autodetect.");
- PrintAndLog(" <invert>, 1 for invert output, can be used even if the clock is omitted");
- PrintAndLog(" [fchigh], larger field clock length, omit for autodetect");
- PrintAndLog(" [fclow], small field clock length, omit for autodetect");
- PrintAndLog("");
- PrintAndLog(" sample: data rawdemod fs = demod an fsk tag from GraphBuffer using autodetect");
- PrintAndLog(" : data rawdemod fs 32 = demod an fsk tag from GraphBuffer using a clock of RF/32, autodetect fc");
- PrintAndLog(" : data rawdemod fs 1 = demod an fsk tag from GraphBuffer using autodetect, invert output");
- PrintAndLog(" : data rawdemod fs 32 1 = demod an fsk tag from GraphBuffer using a clock of RF/32, invert output, autodetect fc");
- PrintAndLog(" : data rawdemod fs 64 0 8 5 = demod an fsk1 RF/64 tag from GraphBuffer");
- PrintAndLog(" : data rawdemod fs 50 0 10 8 = demod an fsk2 RF/50 tag from GraphBuffer");
- PrintAndLog(" : data rawdemod fs 50 1 10 8 = demod an fsk2a RF/50 tag from GraphBuffer");
- return 0;
- }
- return FSKrawDemod(Cmd, TRUE);
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod fs [clock] <invert> [fchigh] [fclow]");
+ PrintAndLog(" [set clock as integer] optional, omit for autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output, can be used even if the clock is omitted");
+ PrintAndLog(" [fchigh], larger field clock length, omit for autodetect");
+ PrintAndLog(" [fclow], small field clock length, omit for autodetect");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod fs = demod an fsk tag from GraphBuffer using autodetect");
+ PrintAndLog(" : data rawdemod fs 32 = demod an fsk tag from GraphBuffer using a clock of RF/32, autodetect fc");
+ PrintAndLog(" : data rawdemod fs 1 = demod an fsk tag from GraphBuffer using autodetect, invert output");
+ PrintAndLog(" : data rawdemod fs 32 1 = demod an fsk tag from GraphBuffer using a clock of RF/32, invert output, autodetect fc");
+ PrintAndLog(" : data rawdemod fs 64 0 8 5 = demod an fsk1 RF/64 tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod fs 50 0 10 8 = demod an fsk2 RF/50 tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod fs 50 1 10 8 = demod an fsk2a RF/50 tag from GraphBuffer");
+ return 0;
+ }
+ return FSKrawDemod(Cmd, TRUE);
}
//by marshmellow (based on existing demod + holiman's refactor)
//print full HID Prox ID and some bit format details if found
int CmdFSKdemodHID(const char *Cmd)
{
- //raw fsk demod no manchester decoding no start bit finding just get binary from wave
- uint32_t hi2=0, hi=0, lo=0;
-
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
- if (BitLen==0) return 0;
- //get binary from fsk wave
- int idx = HIDdemodFSK(BitStream,&BitLen,&hi2,&hi,&lo);
- if (idx<0){
- if (g_debugMode){
- if (idx==-1){
- PrintAndLog("DEBUG: Just Noise Detected");
- } else if (idx == -2) {
- PrintAndLog("DEBUG: Error demoding fsk");
- } else if (idx == -3) {
- PrintAndLog("DEBUG: Preamble not found");
- } else if (idx == -4) {
- PrintAndLog("DEBUG: Error in Manchester data, SIZE: %d", BitLen);
- } else {
- PrintAndLog("DEBUG: Error demoding fsk %d", idx);
- }
- }
- return 0;
- }
- if (hi2==0 && hi==0 && lo==0) {
- if (g_debugMode) PrintAndLog("DEBUG: Error - no values found");
- return 0;
- }
- if (hi2 != 0){ //extra large HID tags
- PrintAndLog("HID Prox TAG ID: %x%08x%08x (%d)",
- (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
- }
- else { //standard HID tags <38 bits
- uint8_t fmtLen = 0;
- uint32_t fc = 0;
- uint32_t cardnum = 0;
- if (((hi>>5)&1)==1){//if bit 38 is set then < 37 bit format is used
- uint32_t lo2=0;
- lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit
- uint8_t idx3 = 1;
- while(lo2>1){ //find last bit set to 1 (format len bit)
- lo2=lo2>>1;
- idx3++;
- }
- fmtLen =idx3+19;
- fc =0;
- cardnum=0;
- if(fmtLen==26){
- cardnum = (lo>>1)&0xFFFF;
- fc = (lo>>17)&0xFF;
- }
- if(fmtLen==34){
- cardnum = (lo>>1)&0xFFFF;
- fc= ((hi&1)<<15)|(lo>>17);
- }
- if(fmtLen==35){
- cardnum = (lo>>1)&0xFFFFF;
- fc = ((hi&1)<<11)|(lo>>21);
- }
- }
- else { //if bit 38 is not set then 37 bit format is used
- fmtLen = 37;
- fc = 0;
- cardnum = 0;
- if(fmtLen == 37){
- cardnum = (lo>>1)&0x7FFFF;
- fc = ((hi&0xF)<<12)|(lo>>20);
- }
- }
- PrintAndLog("HID Prox TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
- (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
- (unsigned int) fmtLen, (unsigned int) fc, (unsigned int) cardnum);
- }
- setDemodBuf(BitStream,BitLen,idx);
- if (g_debugMode){
- PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, BitLen);
- printDemodBuff();
- }
- return 1;
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint32_t hi2=0, hi=0, lo=0;
+
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+ //get binary from fsk wave
+ int idx = HIDdemodFSK(BitStream,&BitLen,&hi2,&hi,&lo);
+ if (idx<0){
+ if (g_debugMode){
+ if (idx==-1){
+ PrintAndLog("DEBUG: Just Noise Detected");
+ } else if (idx == -2) {
+ PrintAndLog("DEBUG: Error demoding fsk");
+ } else if (idx == -3) {
+ PrintAndLog("DEBUG: Preamble not found");
+ } else if (idx == -4) {
+ PrintAndLog("DEBUG: Error in Manchester data, SIZE: %d", BitLen);
+ } else {
+ PrintAndLog("DEBUG: Error demoding fsk %d", idx);
+ }
+ }
+ return 0;
+ }
+ if (hi2==0 && hi==0 && lo==0) {
+ if (g_debugMode) PrintAndLog("DEBUG: Error - no values found");
+ return 0;
+ }
+ if (hi2 != 0){ //extra large HID tags
+ PrintAndLog("HID Prox TAG ID: %x%08x%08x (%d)",
+ (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+ }
+ else { //standard HID tags <38 bits
+ uint8_t fmtLen = 0;
+ uint32_t fc = 0;
+ uint32_t cardnum = 0;
+ if (((hi>>5)&1)==1){//if bit 38 is set then < 37 bit format is used
+ uint32_t lo2=0;
+ lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit
+ uint8_t idx3 = 1;
+ while(lo2>1){ //find last bit set to 1 (format len bit)
+ lo2=lo2>>1;
+ idx3++;
+ }
+ fmtLen =idx3+19;
+ fc =0;
+ cardnum=0;
+ if(fmtLen==26){
+ cardnum = (lo>>1)&0xFFFF;
+ fc = (lo>>17)&0xFF;
+ }
+ if(fmtLen==34){
+ cardnum = (lo>>1)&0xFFFF;
+ fc= ((hi&1)<<15)|(lo>>17);
+ }
+ if(fmtLen==35){
+ cardnum = (lo>>1)&0xFFFFF;
+ fc = ((hi&1)<<11)|(lo>>21);
+ }
+ }
+ else { //if bit 38 is not set then 37 bit format is used
+ fmtLen = 37;
+ fc = 0;
+ cardnum = 0;
+ if(fmtLen == 37){
+ cardnum = (lo>>1)&0x7FFFF;
+ fc = ((hi&0xF)<<12)|(lo>>20);
+ }
+ }
+ PrintAndLog("HID Prox TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
+ (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
+ (unsigned int) fmtLen, (unsigned int) fc, (unsigned int) cardnum);
+ }
+ setDemodBuf(BitStream,BitLen,idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
+ return 1;
}
//by marshmellow
//print full Paradox Prox ID and some bit format details if found
int CmdFSKdemodParadox(const char *Cmd)
{
- //raw fsk demod no manchester decoding no start bit finding just get binary from wave
- uint32_t hi2=0, hi=0, lo=0;
-
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
- if (BitLen==0) return 0;
- //get binary from fsk wave
- int idx = ParadoxdemodFSK(BitStream,&BitLen,&hi2,&hi,&lo);
- if (idx<0){
- if (g_debugMode){
- if (idx==-1){
- PrintAndLog("DEBUG: Just Noise Detected");
- } else if (idx == -2) {
- PrintAndLog("DEBUG: Error demoding fsk");
- } else if (idx == -3) {
- PrintAndLog("DEBUG: Preamble not found");
- } else if (idx == -4) {
- PrintAndLog("DEBUG: Error in Manchester data");
- } else {
- PrintAndLog("DEBUG: Error demoding fsk %d", idx);
- }
- }
- return 0;
- }
- if (hi2==0 && hi==0 && lo==0){
- if (g_debugMode) PrintAndLog("DEBUG: Error - no value found");
- return 0;
- }
- uint32_t fc = ((hi & 0x3)<<6) | (lo>>26);
- uint32_t cardnum = (lo>>10)&0xFFFF;
- uint32_t rawLo = bytebits_to_byte(BitStream+idx+64,32);
- uint32_t rawHi = bytebits_to_byte(BitStream+idx+32,32);
- uint32_t rawHi2 = bytebits_to_byte(BitStream+idx,32);
-
- PrintAndLog("Paradox TAG ID: %x%08x - FC: %d - Card: %d - Checksum: %02x - RAW: %08x%08x%08x",
- hi>>10, (hi & 0x3)<<26 | (lo>>10), fc, cardnum, (lo>>2) & 0xFF, rawHi2, rawHi, rawLo);
- setDemodBuf(BitStream,BitLen,idx);
- if (g_debugMode){
- PrintAndLog("DEBUG: idx: %d, len: %d, Printing Demod Buffer:", idx, BitLen);
- printDemodBuff();
- }
- return 1;
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint32_t hi2=0, hi=0, lo=0;
+
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+ //get binary from fsk wave
+ int idx = ParadoxdemodFSK(BitStream,&BitLen,&hi2,&hi,&lo);
+ if (idx<0){
+ if (g_debugMode){
+ if (idx==-1){
+ PrintAndLog("DEBUG: Just Noise Detected");
+ } else if (idx == -2) {
+ PrintAndLog("DEBUG: Error demoding fsk");
+ } else if (idx == -3) {
+ PrintAndLog("DEBUG: Preamble not found");
+ } else if (idx == -4) {
+ PrintAndLog("DEBUG: Error in Manchester data");
+ } else {
+ PrintAndLog("DEBUG: Error demoding fsk %d", idx);
+ }
+ }
+ return 0;
+ }
+ if (hi2==0 && hi==0 && lo==0){
+ if (g_debugMode) PrintAndLog("DEBUG: Error - no value found");
+ return 0;
+ }
+ uint32_t fc = ((hi & 0x3)<<6) | (lo>>26);
+ uint32_t cardnum = (lo>>10)&0xFFFF;
+ uint32_t rawLo = bytebits_to_byte(BitStream+idx+64,32);
+ uint32_t rawHi = bytebits_to_byte(BitStream+idx+32,32);
+ uint32_t rawHi2 = bytebits_to_byte(BitStream+idx,32);
+
+ PrintAndLog("Paradox TAG ID: %x%08x - FC: %d - Card: %d - Checksum: %02x - RAW: %08x%08x%08x",
+ hi>>10, (hi & 0x3)<<26 | (lo>>10), fc, cardnum, (lo>>2) & 0xFF, rawHi2, rawHi, rawLo);
+ setDemodBuf(BitStream,BitLen,idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, len: %d, Printing Demod Buffer:", idx, BitLen);
+ printDemodBuff();
+ }
+ return 1;
}
//by marshmellow
//print ioprox ID and some format details
int CmdFSKdemodIO(const char *Cmd)
{
- //raw fsk demod no manchester decoding no start bit finding just get binary from wave
- //set defaults
- int idx=0;
- //something in graphbuffer?
- if (GraphTraceLen < 65) {
- if (g_debugMode)PrintAndLog("DEBUG: not enough samples in GraphBuffer");
- return 0;
- }
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
- if (BitLen==0) return 0;
-
- //get binary from fsk wave
- idx = IOdemodFSK(BitStream,BitLen);
- if (idx<0){
- if (g_debugMode){
- if (idx==-1){
- PrintAndLog("DEBUG: Just Noise Detected");
- } else if (idx == -2) {
- PrintAndLog("DEBUG: not enough samples");
- } else if (idx == -3) {
- PrintAndLog("DEBUG: error during fskdemod");
- } else if (idx == -4) {
- PrintAndLog("DEBUG: Preamble not found");
- } else if (idx == -5) {
- PrintAndLog("DEBUG: Separator bits not found");
- } else {
- PrintAndLog("DEBUG: Error demoding fsk %d", idx);
- }
- }
- return 0;
- }
- if (idx==0){
- if (g_debugMode==1){
- PrintAndLog("DEBUG: IO Prox Data not found - FSK Bits: %d",BitLen);
- if (BitLen > 92) printBitStream(BitStream,92);
- }
- return 0;
- }
- //Index map
- //0 10 20 30 40 50 60
- //| | | | | | |
- //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
- //-----------------------------------------------------------------------------
- //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
- //
- //XSF(version)facility:codeone+codetwo (raw)
- //Handle the data
- if (idx+64>BitLen) {
- if (g_debugMode==1) PrintAndLog("not enough bits found - bitlen: %d",BitLen);
- return 0;
- }
- PrintAndLog("%d%d%d%d%d%d%d%d %d",BitStream[idx], BitStream[idx+1], BitStream[idx+2], BitStream[idx+3], BitStream[idx+4], BitStream[idx+5], BitStream[idx+6], BitStream[idx+7], BitStream[idx+8]);
- PrintAndLog("%d%d%d%d%d%d%d%d %d",BitStream[idx+9], BitStream[idx+10], BitStream[idx+11],BitStream[idx+12],BitStream[idx+13],BitStream[idx+14],BitStream[idx+15],BitStream[idx+16],BitStream[idx+17]);
- PrintAndLog("%d%d%d%d%d%d%d%d %d facility",BitStream[idx+18], BitStream[idx+19], BitStream[idx+20],BitStream[idx+21],BitStream[idx+22],BitStream[idx+23],BitStream[idx+24],BitStream[idx+25],BitStream[idx+26]);
- PrintAndLog("%d%d%d%d%d%d%d%d %d version",BitStream[idx+27], BitStream[idx+28], BitStream[idx+29],BitStream[idx+30],BitStream[idx+31],BitStream[idx+32],BitStream[idx+33],BitStream[idx+34],BitStream[idx+35]);
- PrintAndLog("%d%d%d%d%d%d%d%d %d code1",BitStream[idx+36], BitStream[idx+37], BitStream[idx+38],BitStream[idx+39],BitStream[idx+40],BitStream[idx+41],BitStream[idx+42],BitStream[idx+43],BitStream[idx+44]);
- PrintAndLog("%d%d%d%d%d%d%d%d %d code2",BitStream[idx+45], BitStream[idx+46], BitStream[idx+47],BitStream[idx+48],BitStream[idx+49],BitStream[idx+50],BitStream[idx+51],BitStream[idx+52],BitStream[idx+53]);
- PrintAndLog("%d%d%d%d%d%d%d%d %d%d checksum",BitStream[idx+54],BitStream[idx+55],BitStream[idx+56],BitStream[idx+57],BitStream[idx+58],BitStream[idx+59],BitStream[idx+60],BitStream[idx+61],BitStream[idx+62],BitStream[idx+63]);
-
- uint32_t code = bytebits_to_byte(BitStream+idx,32);
- uint32_t code2 = bytebits_to_byte(BitStream+idx+32,32);
- uint8_t version = bytebits_to_byte(BitStream+idx+27,8); //14,4
- uint8_t facilitycode = bytebits_to_byte(BitStream+idx+18,8) ;
- uint16_t number = (bytebits_to_byte(BitStream+idx+36,8)<<8)|(bytebits_to_byte(BitStream+idx+45,8)); //36,9
- uint8_t crc = bytebits_to_byte(BitStream+idx+54,8);
- uint16_t calccrc = 0;
-
- for (uint8_t i=1; i<6; ++i){
- calccrc += bytebits_to_byte(BitStream+idx+9*i,8);
- //PrintAndLog("%d", calccrc);
- }
- calccrc &= 0xff;
- calccrc = 0xff - calccrc;
-
- char *crcStr = (crc == calccrc) ? "crc ok": "!crc";
-
- PrintAndLog("IO Prox XSF(%02d)%02x:%05d (%08x%08x) [%02x %s]",version,facilitycode,number,code,code2, crc, crcStr);
- setDemodBuf(BitStream,64,idx);
- if (g_debugMode){
- PrintAndLog("DEBUG: idx: %d, Len: %d, Printing demod buffer:",idx,64);
- printDemodBuff();
- }
- return 1;
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ //set defaults
+ int idx=0;
+ //something in graphbuffer?
+ if (GraphTraceLen < 65) {
+ if (g_debugMode)PrintAndLog("DEBUG: not enough samples in GraphBuffer");
+ return 0;
+ }
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+
+ //get binary from fsk wave
+ idx = IOdemodFSK(BitStream,BitLen);
+ if (idx<0){
+ if (g_debugMode){
+ if (idx==-1){
+ PrintAndLog("DEBUG: Just Noise Detected");
+ } else if (idx == -2) {
+ PrintAndLog("DEBUG: not enough samples");
+ } else if (idx == -3) {
+ PrintAndLog("DEBUG: error during fskdemod");
+ } else if (idx == -4) {
+ PrintAndLog("DEBUG: Preamble not found");
+ } else if (idx == -5) {
+ PrintAndLog("DEBUG: Separator bits not found");
+ } else {
+ PrintAndLog("DEBUG: Error demoding fsk %d", idx);
+ }
+ }
+ return 0;
+ }
+ if (idx==0){
+ if (g_debugMode==1){
+ PrintAndLog("DEBUG: IO Prox Data not found - FSK Bits: %d",BitLen);
+ if (BitLen > 92) printBitStream(BitStream,92);
+ }
+ return 0;
+ }
+ //Index map
+ //0 10 20 30 40 50 60
+ //| | | | | | |
+ //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
+ //-----------------------------------------------------------------------------
+ //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
+ //
+ //XSF(version)facility:codeone+codetwo (raw)
+ //Handle the data
+ if (idx+64>BitLen) {
+ if (g_debugMode==1) PrintAndLog("not enough bits found - bitlen: %d",BitLen);
+ return 0;
+ }
+ PrintAndLog("%d%d%d%d%d%d%d%d %d",BitStream[idx], BitStream[idx+1], BitStream[idx+2], BitStream[idx+3], BitStream[idx+4], BitStream[idx+5], BitStream[idx+6], BitStream[idx+7], BitStream[idx+8]);
+ PrintAndLog("%d%d%d%d%d%d%d%d %d",BitStream[idx+9], BitStream[idx+10], BitStream[idx+11],BitStream[idx+12],BitStream[idx+13],BitStream[idx+14],BitStream[idx+15],BitStream[idx+16],BitStream[idx+17]);
+ PrintAndLog("%d%d%d%d%d%d%d%d %d facility",BitStream[idx+18], BitStream[idx+19], BitStream[idx+20],BitStream[idx+21],BitStream[idx+22],BitStream[idx+23],BitStream[idx+24],BitStream[idx+25],BitStream[idx+26]);
+ PrintAndLog("%d%d%d%d%d%d%d%d %d version",BitStream[idx+27], BitStream[idx+28], BitStream[idx+29],BitStream[idx+30],BitStream[idx+31],BitStream[idx+32],BitStream[idx+33],BitStream[idx+34],BitStream[idx+35]);
+ PrintAndLog("%d%d%d%d%d%d%d%d %d code1",BitStream[idx+36], BitStream[idx+37], BitStream[idx+38],BitStream[idx+39],BitStream[idx+40],BitStream[idx+41],BitStream[idx+42],BitStream[idx+43],BitStream[idx+44]);
+ PrintAndLog("%d%d%d%d%d%d%d%d %d code2",BitStream[idx+45], BitStream[idx+46], BitStream[idx+47],BitStream[idx+48],BitStream[idx+49],BitStream[idx+50],BitStream[idx+51],BitStream[idx+52],BitStream[idx+53]);
+ PrintAndLog("%d%d%d%d%d%d%d%d %d%d checksum",BitStream[idx+54],BitStream[idx+55],BitStream[idx+56],BitStream[idx+57],BitStream[idx+58],BitStream[idx+59],BitStream[idx+60],BitStream[idx+61],BitStream[idx+62],BitStream[idx+63]);
+
+ uint32_t code = bytebits_to_byte(BitStream+idx,32);
+ uint32_t code2 = bytebits_to_byte(BitStream+idx+32,32);
+ uint8_t version = bytebits_to_byte(BitStream+idx+27,8); //14,4
+ uint8_t facilitycode = bytebits_to_byte(BitStream+idx+18,8) ;
+ uint16_t number = (bytebits_to_byte(BitStream+idx+36,8)<<8)|(bytebits_to_byte(BitStream+idx+45,8)); //36,9
+ uint8_t crc = bytebits_to_byte(BitStream+idx+54,8);
+ uint16_t calccrc = 0;
+
+ for (uint8_t i=1; i<6; ++i){
+ calccrc += bytebits_to_byte(BitStream+idx+9*i,8);
+ //PrintAndLog("%d", calccrc);
+ }
+ calccrc &= 0xff;
+ calccrc = 0xff - calccrc;
+
+ char *crcStr = (crc == calccrc) ? "crc ok": "!crc";
+
+ PrintAndLog("IO Prox XSF(%02d)%02x:%05d (%08x%08x) [%02x %s]",version,facilitycode,number,code,code2, crc, crcStr);
+ setDemodBuf(BitStream,64,idx);
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing demod buffer:",idx,64);
+ printDemodBuff();
+ }
+ return 1;
}
//by marshmellow
int CmdFSKdemodAWID(const char *Cmd)
{
- //int verbose=1;
- //sscanf(Cmd, "%i", &verbose);
-
- //raw fsk demod no manchester decoding no start bit finding just get binary from wave
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t size = getFromGraphBuf(BitStream);
- if (size==0) return 0;
-
- //get binary from fsk wave
- int idx = AWIDdemodFSK(BitStream, &size);
- if (idx<=0){
- if (g_debugMode==1){
- if (idx == -1)
- PrintAndLog("DEBUG: Error - not enough samples");
- else if (idx == -2)
- PrintAndLog("DEBUG: Error - only noise found");
- else if (idx == -3)
- PrintAndLog("DEBUG: Error - problem during FSK demod");
- else if (idx == -4)
- PrintAndLog("DEBUG: Error - AWID preamble not found");
- else if (idx == -5)
- PrintAndLog("DEBUG: Error - Size not correct: %d", size);
- else
- PrintAndLog("DEBUG: Error %d",idx);
- }
- return 0;
- }
-
- // Index map
- // 0 10 20 30 40 50 60
- // | | | | | | |
- // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96
- // -----------------------------------------------------------------------------
- // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1
- // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96
- // |---26 bit---| |-----117----||-------------142-------------|
- // b = format bit len, o = odd parity of last 3 bits
- // f = facility code, c = card number
- // w = wiegand parity
- // (26 bit format shown)
+ //int verbose=1;
+ //sscanf(Cmd, "%i", &verbose);
+
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t size = getFromGraphBuf(BitStream);
+ if (size==0) return 0;
+
+ //get binary from fsk wave
+ int idx = AWIDdemodFSK(BitStream, &size);
+ if (idx<=0){
+ if (g_debugMode==1){
+ if (idx == -1)
+ PrintAndLog("DEBUG: Error - not enough samples");
+ else if (idx == -2)
+ PrintAndLog("DEBUG: Error - only noise found");
+ else if (idx == -3)
+ PrintAndLog("DEBUG: Error - problem during FSK demod");
+ else if (idx == -4)
+ PrintAndLog("DEBUG: Error - AWID preamble not found");
+ else if (idx == -5)
+ PrintAndLog("DEBUG: Error - Size not correct: %d", size);
+ else
+ PrintAndLog("DEBUG: Error %d",idx);
+ }
+ return 0;
+ }
+
+ // Index map
+ // 0 10 20 30 40 50 60
+ // | | | | | | |
+ // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96
+ // -----------------------------------------------------------------------------
+ // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1
+ // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96
+ // |---26 bit---| |-----117----||-------------142-------------|
+ // b = format bit len, o = odd parity of last 3 bits
+ // f = facility code, c = card number
+ // w = wiegand parity
+ // (26 bit format shown)
- //get raw ID before removing parities
- uint32_t rawLo = bytebits_to_byte(BitStream+idx+64,32);
- uint32_t rawHi = bytebits_to_byte(BitStream+idx+32,32);
- uint32_t rawHi2 = bytebits_to_byte(BitStream+idx,32);
- setDemodBuf(BitStream,96,idx);
-
- size = removeParity(BitStream, idx+8, 4, 1, 88);
- if (size != 66){
- if (g_debugMode==1) PrintAndLog("DEBUG: Error - at parity check-tag size does not match AWID format");
- return 0;
- }
- // ok valid card found!
-
- // Index map
- // 0 10 20 30 40 50 60
- // | | | | | | |
- // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456
- // -----------------------------------------------------------------------------
- // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000
- // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- // |26 bit| |-117--| |-----142------|
- // b = format bit len, o = odd parity of last 3 bits
- // f = facility code, c = card number
- // w = wiegand parity
- // (26 bit format shown)
-
- uint32_t fc = 0;
- uint32_t cardnum = 0;
- uint32_t code1 = 0;
- uint32_t code2 = 0;
- uint8_t fmtLen = bytebits_to_byte(BitStream,8);
- if (fmtLen==26){
- fc = bytebits_to_byte(BitStream+9, 8);
- cardnum = bytebits_to_byte(BitStream+17, 16);
- code1 = bytebits_to_byte(BitStream+8,fmtLen);
- PrintAndLog("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo);
- } else {
- cardnum = bytebits_to_byte(BitStream+8+(fmtLen-17), 16);
- if (fmtLen>32){
- code1 = bytebits_to_byte(BitStream+8,fmtLen-32);
- code2 = bytebits_to_byte(BitStream+8+(fmtLen-32),32);
- PrintAndLog("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo);
- } else{
- code1 = bytebits_to_byte(BitStream+8,fmtLen);
- PrintAndLog("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo);
- }
- }
- if (g_debugMode){
- PrintAndLog("DEBUG: idx: %d, Len: %d Printing Demod Buffer:", idx, 96);
- printDemodBuff();
- }
- //todo - convert hi2, hi, lo to demodbuffer for future sim/clone commands
- return 1;
+ //get raw ID before removing parities
+ uint32_t rawLo = bytebits_to_byte(BitStream+idx+64,32);
+ uint32_t rawHi = bytebits_to_byte(BitStream+idx+32,32);
+ uint32_t rawHi2 = bytebits_to_byte(BitStream+idx,32);
+ setDemodBuf(BitStream,96,idx);
+
+ size = removeParity(BitStream, idx+8, 4, 1, 88);
+ if (size != 66){
+ if (g_debugMode==1) PrintAndLog("DEBUG: Error - at parity check-tag size does not match AWID format");
+ return 0;
+ }
+ // ok valid card found!
+
+ // Index map
+ // 0 10 20 30 40 50 60
+ // | | | | | | |
+ // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456
+ // -----------------------------------------------------------------------------
+ // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000
+ // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+ // |26 bit| |-117--| |-----142------|
+ // b = format bit len, o = odd parity of last 3 bits
+ // f = facility code, c = card number
+ // w = wiegand parity
+ // (26 bit format shown)
+
+ uint32_t fc = 0;
+ uint32_t cardnum = 0;
+ uint32_t code1 = 0;
+ uint32_t code2 = 0;
+ uint8_t fmtLen = bytebits_to_byte(BitStream,8);
+ if (fmtLen==26){
+ fc = bytebits_to_byte(BitStream+9, 8);
+ cardnum = bytebits_to_byte(BitStream+17, 16);
+ code1 = bytebits_to_byte(BitStream+8,fmtLen);
+ PrintAndLog("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo);
+ } else {
+ cardnum = bytebits_to_byte(BitStream+8+(fmtLen-17), 16);
+ if (fmtLen>32){
+ code1 = bytebits_to_byte(BitStream+8,fmtLen-32);
+ code2 = bytebits_to_byte(BitStream+8+(fmtLen-32),32);
+ PrintAndLog("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo);
+ } else{
+ code1 = bytebits_to_byte(BitStream+8,fmtLen);
+ PrintAndLog("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo);
+ }
+ }
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d Printing Demod Buffer:", idx, 96);
+ printDemodBuff();
+ }
+ //todo - convert hi2, hi, lo to demodbuffer for future sim/clone commands
+ return 1;
}
//by marshmellow
//print full Farpointe Data/Pyramid Prox ID and some bit format details if found
int CmdFSKdemodPyramid(const char *Cmd)
{
- //raw fsk demod no manchester decoding no start bit finding just get binary from wave
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t size = getFromGraphBuf(BitStream);
- if (size==0) return 0;
-
- //get binary from fsk wave
- int idx = PyramiddemodFSK(BitStream, &size);
- if (idx < 0){
- if (g_debugMode==1){
- if (idx == -5)
- PrintAndLog("DEBUG: Error - not enough samples");
- else if (idx == -1)
- PrintAndLog("DEBUG: Error - only noise found");
- else if (idx == -2)
- PrintAndLog("DEBUG: Error - problem during FSK demod");
- else if (idx == -3)
- PrintAndLog("DEBUG: Error - Size not correct: %d", size);
- else if (idx == -4)
- PrintAndLog("DEBUG: Error - Pyramid preamble not found");
- else
- PrintAndLog("DEBUG: Error - idx: %d",idx);
- }
- return 0;
- }
- // Index map
- // 0 10 20 30 40 50 60
- // | | | | | | |
- // 0123456 7 8901234 5 6789012 3 4567890 1 2345678 9 0123456 7 8901234 5 6789012 3
- // -----------------------------------------------------------------------------
- // 0000000 0 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1
- // premable xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o
-
- // 64 70 80 90 100 110 120
- // | | | | | | |
- // 4567890 1 2345678 9 0123456 7 8901234 5 6789012 3 4567890 1 2345678 9 0123456 7
- // -----------------------------------------------------------------------------
- // 0000000 1 0000000 1 0000000 1 0110111 0 0011000 1 0000001 0 0001100 1 1001010 0
- // xxxxxxx o xxxxxxx o xxxxxxx o xswffff o ffffccc o ccccccc o ccccccw o ppppppp o
- // |---115---||---------71---------|
- // s = format start bit, o = odd parity of last 7 bits
- // f = facility code, c = card number
- // w = wiegand parity, x = extra space for other formats
- // p = unknown checksum
- // (26 bit format shown)
-
- //get bytes for checksum calc
- uint8_t checksum = bytebits_to_byte(BitStream + idx + 120, 8);
- uint8_t csBuff[14] = {0x00};
- for (uint8_t i = 0; i < 13; i++){
- csBuff[i] = bytebits_to_byte(BitStream + idx + 16 + (i*8), 8);
- }
- //check checksum calc
- //checksum calc thanks to ICEMAN!!
- uint32_t checkCS = CRC8Maxim(csBuff,13);
-
- //get raw ID before removing parities
- uint32_t rawLo = bytebits_to_byte(BitStream+idx+96,32);
- uint32_t rawHi = bytebits_to_byte(BitStream+idx+64,32);
- uint32_t rawHi2 = bytebits_to_byte(BitStream+idx+32,32);
- uint32_t rawHi3 = bytebits_to_byte(BitStream+idx,32);
- setDemodBuf(BitStream,128,idx);
-
- size = removeParity(BitStream, idx+8, 8, 1, 120);
- if (size != 105){
- if (g_debugMode==1)
- PrintAndLog("DEBUG: Error at parity check - tag size does not match Pyramid format, SIZE: %d, IDX: %d, hi3: %x",size, idx, rawHi3);
- return 0;
- }
-
- // ok valid card found!
-
- // Index map
- // 0 10 20 30 40 50 60 70
- // | | | | | | | |
- // 01234567890123456789012345678901234567890123456789012345678901234567890
- // -----------------------------------------------------------------------
- // 00000000000000000000000000000000000000000000000000000000000000000000000
- // xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-
- // 71 80 90 100
- // | | | |
- // 1 2 34567890 1234567890123456 7 8901234
- // ---------------------------------------
- // 1 1 01110011 0000000001000110 0 1001010
- // s w ffffffff cccccccccccccccc w ppppppp
- // |--115-| |------71------|
- // s = format start bit, o = odd parity of last 7 bits
- // f = facility code, c = card number
- // w = wiegand parity, x = extra space for other formats
- // p = unknown checksum
- // (26 bit format shown)
-
- //find start bit to get fmtLen
- int j;
- for (j=0; j<size; j++){
- if(BitStream[j]) break;
- }
- uint8_t fmtLen = size-j-8;
- uint32_t fc = 0;
- uint32_t cardnum = 0;
- uint32_t code1 = 0;
- //uint32_t code2 = 0;
- if (fmtLen==26){
- fc = bytebits_to_byte(BitStream+73, 8);
- cardnum = bytebits_to_byte(BitStream+81, 16);
- code1 = bytebits_to_byte(BitStream+72,fmtLen);
- PrintAndLog("Pyramid ID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi3, rawHi2, rawHi, rawLo);
- } else if (fmtLen==45){
- fmtLen=42; //end = 10 bits not 7 like 26 bit fmt
- fc = bytebits_to_byte(BitStream+53, 10);
- cardnum = bytebits_to_byte(BitStream+63, 32);
- PrintAndLog("Pyramid ID Found - BitLength: %d, FC: %d, Card: %d - Raw: %08x%08x%08x%08x", fmtLen, fc, cardnum, rawHi3, rawHi2, rawHi, rawLo);
- } else {
- cardnum = bytebits_to_byte(BitStream+81, 16);
- if (fmtLen>32){
- //code1 = bytebits_to_byte(BitStream+(size-fmtLen),fmtLen-32);
- //code2 = bytebits_to_byte(BitStream+(size-32),32);
- PrintAndLog("Pyramid ID Found - BitLength: %d -unknown BitLength- (%d), Raw: %08x%08x%08x%08x", fmtLen, cardnum, rawHi3, rawHi2, rawHi, rawLo);
- } else{
- //code1 = bytebits_to_byte(BitStream+(size-fmtLen),fmtLen);
- PrintAndLog("Pyramid ID Found - BitLength: %d -unknown BitLength- (%d), Raw: %08x%08x%08x%08x", fmtLen, cardnum, rawHi3, rawHi2, rawHi, rawLo);
- }
- }
- if (checksum == checkCS)
- PrintAndLog("Checksum %02x passed", checksum);
- else
- PrintAndLog("Checksum %02x failed - should have been %02x", checksum, checkCS);
-
- if (g_debugMode){
- PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, 128);
- printDemodBuff();
- }
- return 1;
+ //raw fsk demod no manchester decoding no start bit finding just get binary from wave
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t size = getFromGraphBuf(BitStream);
+ if (size==0) return 0;
+
+ //get binary from fsk wave
+ int idx = PyramiddemodFSK(BitStream, &size);
+ if (idx < 0){
+ if (g_debugMode==1){
+ if (idx == -5)
+ PrintAndLog("DEBUG: Error - not enough samples");
+ else if (idx == -1)
+ PrintAndLog("DEBUG: Error - only noise found");
+ else if (idx == -2)
+ PrintAndLog("DEBUG: Error - problem during FSK demod");
+ else if (idx == -3)
+ PrintAndLog("DEBUG: Error - Size not correct: %d", size);
+ else if (idx == -4)
+ PrintAndLog("DEBUG: Error - Pyramid preamble not found");
+ else
+ PrintAndLog("DEBUG: Error - idx: %d",idx);
+ }
+ return 0;
+ }
+ // Index map
+ // 0 10 20 30 40 50 60
+ // | | | | | | |
+ // 0123456 7 8901234 5 6789012 3 4567890 1 2345678 9 0123456 7 8901234 5 6789012 3
+ // -----------------------------------------------------------------------------
+ // 0000000 0 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1 0000000 1
+ // premable xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o xxxxxxx o
+
+ // 64 70 80 90 100 110 120
+ // | | | | | | |
+ // 4567890 1 2345678 9 0123456 7 8901234 5 6789012 3 4567890 1 2345678 9 0123456 7
+ // -----------------------------------------------------------------------------
+ // 0000000 1 0000000 1 0000000 1 0110111 0 0011000 1 0000001 0 0001100 1 1001010 0
+ // xxxxxxx o xxxxxxx o xxxxxxx o xswffff o ffffccc o ccccccc o ccccccw o ppppppp o
+ // |---115---||---------71---------|
+ // s = format start bit, o = odd parity of last 7 bits
+ // f = facility code, c = card number
+ // w = wiegand parity, x = extra space for other formats
+ // p = unknown checksum
+ // (26 bit format shown)
+
+ //get bytes for checksum calc
+ uint8_t checksum = bytebits_to_byte(BitStream + idx + 120, 8);
+ uint8_t csBuff[14] = {0x00};
+ for (uint8_t i = 0; i < 13; i++){
+ csBuff[i] = bytebits_to_byte(BitStream + idx + 16 + (i*8), 8);
+ }
+ //check checksum calc
+ //checksum calc thanks to ICEMAN!!
+ uint32_t checkCS = CRC8Maxim(csBuff,13);
+
+ //get raw ID before removing parities
+ uint32_t rawLo = bytebits_to_byte(BitStream+idx+96,32);
+ uint32_t rawHi = bytebits_to_byte(BitStream+idx+64,32);
+ uint32_t rawHi2 = bytebits_to_byte(BitStream+idx+32,32);
+ uint32_t rawHi3 = bytebits_to_byte(BitStream+idx,32);
+ setDemodBuf(BitStream,128,idx);
+
+ size = removeParity(BitStream, idx+8, 8, 1, 120);
+ if (size != 105){
+ if (g_debugMode==1)
+ PrintAndLog("DEBUG: Error at parity check - tag size does not match Pyramid format, SIZE: %d, IDX: %d, hi3: %x",size, idx, rawHi3);
+ return 0;
+ }
+
+ // ok valid card found!
+
+ // Index map
+ // 0 10 20 30 40 50 60 70
+ // | | | | | | | |
+ // 01234567890123456789012345678901234567890123456789012345678901234567890
+ // -----------------------------------------------------------------------
+ // 00000000000000000000000000000000000000000000000000000000000000000000000
+ // xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+
+ // 71 80 90 100
+ // | | | |
+ // 1 2 34567890 1234567890123456 7 8901234
+ // ---------------------------------------
+ // 1 1 01110011 0000000001000110 0 1001010
+ // s w ffffffff cccccccccccccccc w ppppppp
+ // |--115-| |------71------|
+ // s = format start bit, o = odd parity of last 7 bits
+ // f = facility code, c = card number
+ // w = wiegand parity, x = extra space for other formats
+ // p = unknown checksum
+ // (26 bit format shown)
+
+ //find start bit to get fmtLen
+ int j;
+ for (j=0; j<size; j++){
+ if(BitStream[j]) break;
+ }
+ uint8_t fmtLen = size-j-8;
+ uint32_t fc = 0;
+ uint32_t cardnum = 0;
+ uint32_t code1 = 0;
+ //uint32_t code2 = 0;
+ if (fmtLen==26){
+ fc = bytebits_to_byte(BitStream+73, 8);
+ cardnum = bytebits_to_byte(BitStream+81, 16);
+ code1 = bytebits_to_byte(BitStream+72,fmtLen);
+ PrintAndLog("Pyramid ID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi3, rawHi2, rawHi, rawLo);
+ } else if (fmtLen==45){
+ fmtLen=42; //end = 10 bits not 7 like 26 bit fmt
+ fc = bytebits_to_byte(BitStream+53, 10);
+ cardnum = bytebits_to_byte(BitStream+63, 32);
+ PrintAndLog("Pyramid ID Found - BitLength: %d, FC: %d, Card: %d - Raw: %08x%08x%08x%08x", fmtLen, fc, cardnum, rawHi3, rawHi2, rawHi, rawLo);
+ } else {
+ cardnum = bytebits_to_byte(BitStream+81, 16);
+ if (fmtLen>32){
+ //code1 = bytebits_to_byte(BitStream+(size-fmtLen),fmtLen-32);
+ //code2 = bytebits_to_byte(BitStream+(size-32),32);
+ PrintAndLog("Pyramid ID Found - BitLength: %d -unknown BitLength- (%d), Raw: %08x%08x%08x%08x", fmtLen, cardnum, rawHi3, rawHi2, rawHi, rawLo);
+ } else{
+ //code1 = bytebits_to_byte(BitStream+(size-fmtLen),fmtLen);
+ PrintAndLog("Pyramid ID Found - BitLength: %d -unknown BitLength- (%d), Raw: %08x%08x%08x%08x", fmtLen, cardnum, rawHi3, rawHi2, rawHi, rawLo);
+ }
+ }
+ if (checksum == checkCS)
+ PrintAndLog("Checksum %02x passed", checksum);
+ else
+ PrintAndLog("Checksum %02x failed - should have been %02x", checksum, checkCS);
+
+ if (g_debugMode){
+ PrintAndLog("DEBUG: idx: %d, Len: %d, Printing Demod Buffer:", idx, 128);
+ printDemodBuff();
+ }
+ return 1;
}
int CmdFSKdemod(const char *Cmd) //old CmdFSKdemod needs updating
{
- static const int LowTone[] = {
- 1, 1, 1, 1, 1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, -1, -1, -1, -1, -1
- };
- static const int HighTone[] = {
- 1, 1, 1, 1, 1, -1, -1, -1, -1,
- 1, 1, 1, 1, -1, -1, -1, -1,
- 1, 1, 1, 1, -1, -1, -1, -1,
- 1, 1, 1, 1, -1, -1, -1, -1,
- 1, 1, 1, 1, -1, -1, -1, -1,
- 1, 1, 1, 1, -1, -1, -1, -1, -1,
- };
-
- int lowLen = sizeof (LowTone) / sizeof (int);
- int highLen = sizeof (HighTone) / sizeof (int);
- int convLen = (highLen > lowLen) ? highLen : lowLen;
- uint32_t hi = 0, lo = 0;
-
- int i, j;
- int minMark = 0, maxMark = 0;
-
- for (i = 0; i < GraphTraceLen - convLen; ++i) {
- int lowSum = 0, highSum = 0;
-
- for (j = 0; j < lowLen; ++j) {
- lowSum += LowTone[j]*GraphBuffer[i+j];
- }
- for (j = 0; j < highLen; ++j) {
- highSum += HighTone[j] * GraphBuffer[i + j];
- }
- lowSum = abs(100 * lowSum / lowLen);
- highSum = abs(100 * highSum / highLen);
- GraphBuffer[i] = (highSum << 16) | lowSum;
- }
-
- for(i = 0; i < GraphTraceLen - convLen - 16; ++i) {
- int lowTot = 0, highTot = 0;
- // 10 and 8 are f_s divided by f_l and f_h, rounded
- for (j = 0; j < 10; ++j) {
- lowTot += (GraphBuffer[i+j] & 0xffff);
- }
- for (j = 0; j < 8; j++) {
- highTot += (GraphBuffer[i + j] >> 16);
- }
- GraphBuffer[i] = lowTot - highTot;
- if (GraphBuffer[i] > maxMark) maxMark = GraphBuffer[i];
- if (GraphBuffer[i] < minMark) minMark = GraphBuffer[i];
- }
-
- GraphTraceLen -= (convLen + 16);
- RepaintGraphWindow();
-
- // Find bit-sync (3 lo followed by 3 high) (HID ONLY)
- int max = 0, maxPos = 0;
- for (i = 0; i < 6000; ++i) {
- int dec = 0;
- for (j = 0; j < 3 * lowLen; ++j) {
- dec -= GraphBuffer[i + j];
- }
- for (; j < 3 * (lowLen + highLen ); ++j) {
- dec += GraphBuffer[i + j];
- }
- if (dec > max) {
- max = dec;
- maxPos = i;
- }
- }
-
- // place start of bit sync marker in graph
- GraphBuffer[maxPos] = maxMark;
- GraphBuffer[maxPos + 1] = minMark;
-
- maxPos += j;
-
- // place end of bit sync marker in graph
- GraphBuffer[maxPos] = maxMark;
- GraphBuffer[maxPos+1] = minMark;
-
- PrintAndLog("actual data bits start at sample %d", maxPos);
- PrintAndLog("length %d/%d", highLen, lowLen);
-
- uint8_t bits[46] = {0x00};
-
- // find bit pairs and manchester decode them
- for (i = 0; i < arraylen(bits) - 1; ++i) {
- int dec = 0;
- for (j = 0; j < lowLen; ++j) {
- dec -= GraphBuffer[maxPos + j];
- }
- for (; j < lowLen + highLen; ++j) {
- dec += GraphBuffer[maxPos + j];
- }
- maxPos += j;
- // place inter bit marker in graph
- GraphBuffer[maxPos] = maxMark;
- GraphBuffer[maxPos + 1] = minMark;
-
- // hi and lo form a 64 bit pair
- hi = (hi << 1) | (lo >> 31);
- lo = (lo << 1);
- // store decoded bit as binary (in hi/lo) and text (in bits[])
- if(dec < 0) {
- bits[i] = '1';
- lo |= 1;
- } else {
- bits[i] = '0';
- }
- }
- PrintAndLog("bits: '%s'", bits);
- PrintAndLog("hex: %08x %08x", hi, lo);
- return 0;
+ static const int LowTone[] = {
+ 1, 1, 1, 1, 1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, -1, -1, -1, -1, -1
+ };
+ static const int HighTone[] = {
+ 1, 1, 1, 1, 1, -1, -1, -1, -1,
+ 1, 1, 1, 1, -1, -1, -1, -1,
+ 1, 1, 1, 1, -1, -1, -1, -1,
+ 1, 1, 1, 1, -1, -1, -1, -1,
+ 1, 1, 1, 1, -1, -1, -1, -1,
+ 1, 1, 1, 1, -1, -1, -1, -1, -1,
+ };
+
+ int lowLen = sizeof (LowTone) / sizeof (int);
+ int highLen = sizeof (HighTone) / sizeof (int);
+ int convLen = (highLen > lowLen) ? highLen : lowLen;
+ uint32_t hi = 0, lo = 0;
+
+ int i, j;
+ int minMark = 0, maxMark = 0;
+
+ for (i = 0; i < GraphTraceLen - convLen; ++i) {
+ int lowSum = 0, highSum = 0;
+
+ for (j = 0; j < lowLen; ++j) {
+ lowSum += LowTone[j]*GraphBuffer[i+j];
+ }
+ for (j = 0; j < highLen; ++j) {
+ highSum += HighTone[j] * GraphBuffer[i + j];
+ }
+ lowSum = abs(100 * lowSum / lowLen);
+ highSum = abs(100 * highSum / highLen);
+ GraphBuffer[i] = (highSum << 16) | lowSum;
+ }
+
+ for(i = 0; i < GraphTraceLen - convLen - 16; ++i) {
+ int lowTot = 0, highTot = 0;
+ // 10 and 8 are f_s divided by f_l and f_h, rounded
+ for (j = 0; j < 10; ++j) {
+ lowTot += (GraphBuffer[i+j] & 0xffff);
+ }
+ for (j = 0; j < 8; j++) {
+ highTot += (GraphBuffer[i + j] >> 16);
+ }
+ GraphBuffer[i] = lowTot - highTot;
+ if (GraphBuffer[i] > maxMark) maxMark = GraphBuffer[i];
+ if (GraphBuffer[i] < minMark) minMark = GraphBuffer[i];
+ }
+
+ GraphTraceLen -= (convLen + 16);
+ RepaintGraphWindow();
+
+ // Find bit-sync (3 lo followed by 3 high) (HID ONLY)
+ int max = 0, maxPos = 0;
+ for (i = 0; i < 6000; ++i) {
+ int dec = 0;
+ for (j = 0; j < 3 * lowLen; ++j) {
+ dec -= GraphBuffer[i + j];
+ }
+ for (; j < 3 * (lowLen + highLen ); ++j) {
+ dec += GraphBuffer[i + j];
+ }
+ if (dec > max) {
+ max = dec;
+ maxPos = i;
+ }
+ }
+
+ // place start of bit sync marker in graph
+ GraphBuffer[maxPos] = maxMark;
+ GraphBuffer[maxPos + 1] = minMark;
+
+ maxPos += j;
+
+ // place end of bit sync marker in graph
+ GraphBuffer[maxPos] = maxMark;
+ GraphBuffer[maxPos+1] = minMark;
+
+ PrintAndLog("actual data bits start at sample %d", maxPos);
+ PrintAndLog("length %d/%d", highLen, lowLen);
+
+ uint8_t bits[46] = {0x00};
+
+ // find bit pairs and manchester decode them
+ for (i = 0; i < arraylen(bits) - 1; ++i) {
+ int dec = 0;
+ for (j = 0; j < lowLen; ++j) {
+ dec -= GraphBuffer[maxPos + j];
+ }
+ for (; j < lowLen + highLen; ++j) {
+ dec += GraphBuffer[maxPos + j];
+ }
+ maxPos += j;
+ // place inter bit marker in graph
+ GraphBuffer[maxPos] = maxMark;
+ GraphBuffer[maxPos + 1] = minMark;
+
+ // hi and lo form a 64 bit pair
+ hi = (hi << 1) | (lo >> 31);
+ lo = (lo << 1);
+ // store decoded bit as binary (in hi/lo) and text (in bits[])
+ if(dec < 0) {
+ bits[i] = '1';
+ lo |= 1;
+ } else {
+ bits[i] = '0';
+ }
+ }
+ PrintAndLog("bits: '%s'", bits);
+ PrintAndLog("hex: %08x %08x", hi, lo);
+ return 0;
}
//by marshmellow
//attempt to psk1 demod graph buffer
int PSKDemod(const char *Cmd, bool verbose)
{
- int invert=0;
- int clk=0;
- int maxErr=100;
- sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
- if (clk==1){
- invert=1;
- clk=0;
- }
- if (invert != 0 && invert != 1) {
- if (verbose) PrintAndLog("Invalid argument: %s", Cmd);
- return 0;
- }
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
- if (BitLen==0) return -1;
- uint8_t carrier=countPSK_FC(BitStream, BitLen);
- if (carrier!=2 && carrier!=4 && carrier!=8){
- //invalid carrier
- return 0;
- }
- int errCnt=0;
- errCnt = pskRawDemod(BitStream, &BitLen, &clk, &invert);
- if (errCnt > maxErr){
- if (g_debugMode==1 && verbose) PrintAndLog("Too many errors found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
- return 0;
- }
- if (errCnt<0|| BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
- if (g_debugMode==1 && verbose) PrintAndLog("no data found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
- return 0;
- }
- if (verbose){
- PrintAndLog("Tried PSK Demod using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
- if (errCnt>0){
- PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
- }
- }
- //prime demod buffer for output
- setDemodBuf(BitStream,BitLen,0);
- return 1;
+ int invert=0;
+ int clk=0;
+ int maxErr=100;
+ sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
+ if (clk==1){
+ invert=1;
+ clk=0;
+ }
+ if (invert != 0 && invert != 1) {
+ if (verbose) PrintAndLog("Invalid argument: %s", Cmd);
+ return 0;
+ }
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return -1;
+ uint8_t carrier=countPSK_FC(BitStream, BitLen);
+ if (carrier!=2 && carrier!=4 && carrier!=8){
+ //invalid carrier
+ return 0;
+ }
+ int errCnt=0;
+ errCnt = pskRawDemod(BitStream, &BitLen, &clk, &invert);
+ if (errCnt > maxErr){
+ if (g_debugMode==1 && verbose) PrintAndLog("Too many errors found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
+ return 0;
+ }
+ if (errCnt<0|| BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
+ if (g_debugMode==1 && verbose) PrintAndLog("no data found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
+ return 0;
+ }
+ if (verbose){
+ PrintAndLog("Tried PSK Demod using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
+ if (errCnt>0){
+ PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
+ }
+ }
+ //prime demod buffer for output
+ setDemodBuf(BitStream,BitLen,0);
+ return 1;
}
// Indala 26 bit decode
char showbits[251]={0x00};
if (invert)
if (g_debugMode==1)
- PrintAndLog("Had to invert bits");
+ PrintAndLog("Had to invert bits");
//convert UID to HEX
uint32_t uid1, uid2, uid3, uid4, uid5, uid6, uid7;
int NRZrawDemod(const char *Cmd, bool verbose)
{
- int invert=0;
- int clk=0;
- int maxErr=100;
- sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
- if (clk==1){
- invert=1;
- clk=0;
- }
- if (invert != 0 && invert != 1) {
- PrintAndLog("Invalid argument: %s", Cmd);
- return 0;
- }
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
- size_t BitLen = getFromGraphBuf(BitStream);
- if (BitLen==0) return 0;
- int errCnt=0;
- errCnt = nrzRawDemod(BitStream, &BitLen, &clk, &invert, maxErr);
- if (errCnt > maxErr){
- if (g_debugMode) PrintAndLog("Too many errors found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
- return 0;
- }
- if (errCnt<0|| BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
- if (g_debugMode) PrintAndLog("no data found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
- return 0;
- }
- if (verbose || g_debugMode) PrintAndLog("Tried NRZ Demod using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
- //prime demod buffer for output
- setDemodBuf(BitStream,BitLen,0);
-
- if (errCnt>0 && (verbose || g_debugMode)) PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
- if (verbose || g_debugMode) {
- PrintAndLog("NRZ demoded bitstream:");
- // Now output the bitstream to the scrollback by line of 16 bits
- printDemodBuff();
- }
- return 1;
+ int invert=0;
+ int clk=0;
+ int maxErr=100;
+ sscanf(Cmd, "%i %i %i", &clk, &invert, &maxErr);
+ if (clk==1){
+ invert=1;
+ clk=0;
+ }
+ if (invert != 0 && invert != 1) {
+ PrintAndLog("Invalid argument: %s", Cmd);
+ return 0;
+ }
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN]={0};
+ size_t BitLen = getFromGraphBuf(BitStream);
+ if (BitLen==0) return 0;
+ int errCnt=0;
+ errCnt = nrzRawDemod(BitStream, &BitLen, &clk, &invert, maxErr);
+ if (errCnt > maxErr){
+ if (g_debugMode) PrintAndLog("Too many errors found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
+ return 0;
+ }
+ if (errCnt<0|| BitLen<16){ //throw away static - allow 1 and -1 (in case of threshold command first)
+ if (g_debugMode) PrintAndLog("no data found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
+ return 0;
+ }
+ if (verbose || g_debugMode) PrintAndLog("Tried NRZ Demod using Clock: %d - invert: %d - Bits Found: %d",clk,invert,BitLen);
+ //prime demod buffer for output
+ setDemodBuf(BitStream,BitLen,0);
+
+ if (errCnt>0 && (verbose || g_debugMode)) PrintAndLog("# Errors during Demoding (shown as 77 in bit stream): %d",errCnt);
+ if (verbose || g_debugMode) {
+ PrintAndLog("NRZ demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ }
+ return 1;
}
int CmdNRZrawDemod(const char *Cmd)
{
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: data rawdemod nr [clock] <0|1> [maxError]");
- PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
- PrintAndLog(" <invert>, 1 for invert output");
- PrintAndLog(" [set maximum allowed errors], default = 100.");
- PrintAndLog("");
- PrintAndLog(" sample: data rawdemod nr = demod a nrz/direct tag from GraphBuffer");
- PrintAndLog(" : data rawdemod nr 32 = demod a nrz/direct tag from GraphBuffer using a clock of RF/32");
- PrintAndLog(" : data rawdemod nr 32 1 = demod a nrz/direct tag from GraphBuffer using a clock of RF/32 and inverting data");
- PrintAndLog(" : data rawdemod nr 1 = demod a nrz/direct tag from GraphBuffer while inverting data");
- PrintAndLog(" : data rawdemod nr 64 1 0 = demod a nrz/direct tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
- return 0;
- }
- return NRZrawDemod(Cmd, TRUE);
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod nr [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod nr = demod a nrz/direct tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod nr 32 = demod a nrz/direct tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod nr 32 1 = demod a nrz/direct tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod nr 1 = demod a nrz/direct tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod nr 64 1 0 = demod a nrz/direct tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ return 0;
+ }
+ return NRZrawDemod(Cmd, TRUE);
}
// by marshmellow
// prints binary found and saves in demodbuffer for further commands
int CmdPSK1rawDemod(const char *Cmd)
{
- int ans;
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: data rawdemod p1 [clock] <0|1> [maxError]");
- PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
- PrintAndLog(" <invert>, 1 for invert output");
- PrintAndLog(" [set maximum allowed errors], default = 100.");
- PrintAndLog("");
- PrintAndLog(" sample: data rawdemod p1 = demod a psk1 tag from GraphBuffer");
- PrintAndLog(" : data rawdemod p1 32 = demod a psk1 tag from GraphBuffer using a clock of RF/32");
- PrintAndLog(" : data rawdemod p1 32 1 = demod a psk1 tag from GraphBuffer using a clock of RF/32 and inverting data");
- PrintAndLog(" : data rawdemod p1 1 = demod a psk1 tag from GraphBuffer while inverting data");
- PrintAndLog(" : data rawdemod p1 64 1 0 = demod a psk1 tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
- return 0;
- }
- ans = PSKDemod(Cmd, TRUE);
- //output
- if (!ans){
- if (g_debugMode) PrintAndLog("Error demoding: %d",ans);
- return 0;
- }
+ int ans;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod p1 [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod p1 = demod a psk1 tag from GraphBuffer");
+ PrintAndLog(" : data rawdemod p1 32 = demod a psk1 tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod p1 32 1 = demod a psk1 tag from GraphBuffer using a clock of RF/32 and inverting data");
+ PrintAndLog(" : data rawdemod p1 1 = demod a psk1 tag from GraphBuffer while inverting data");
+ PrintAndLog(" : data rawdemod p1 64 1 0 = demod a psk1 tag from GraphBuffer using a clock of RF/64, inverting data and allowing 0 demod errors");
+ return 0;
+ }
+ ans = PSKDemod(Cmd, TRUE);
+ //output
+ if (!ans){
+ if (g_debugMode) PrintAndLog("Error demoding: %d",ans);
+ return 0;
+ }
- PrintAndLog("PSK demoded bitstream:");
- // Now output the bitstream to the scrollback by line of 16 bits
- printDemodBuff();
- return 1;
+ PrintAndLog("PSK demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ return 1;
}
// by marshmellow
// takes same args as cmdpsk1rawdemod
int CmdPSK2rawDemod(const char *Cmd)
{
- int ans=0;
- char cmdp = param_getchar(Cmd, 0);
- if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: data rawdemod p2 [clock] <0|1> [maxError]");
- PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
- PrintAndLog(" <invert>, 1 for invert output");
- PrintAndLog(" [set maximum allowed errors], default = 100.");
- PrintAndLog("");
- PrintAndLog(" sample: data rawdemod p2 = demod a psk2 tag from GraphBuffer, autodetect clock");
- PrintAndLog(" : data rawdemod p2 32 = demod a psk2 tag from GraphBuffer using a clock of RF/32");
- PrintAndLog(" : data rawdemod p2 32 1 = demod a psk2 tag from GraphBuffer using a clock of RF/32 and inverting output");
- PrintAndLog(" : data rawdemod p2 1 = demod a psk2 tag from GraphBuffer, autodetect clock and invert output");
- PrintAndLog(" : data rawdemod p2 64 1 0 = demod a psk2 tag from GraphBuffer using a clock of RF/64, inverting output and allowing 0 demod errors");
- return 0;
- }
- ans=PSKDemod(Cmd, TRUE);
- if (!ans){
- if (g_debugMode) PrintAndLog("Error demoding: %d",ans);
- return 0;
- }
- psk1TOpsk2(DemodBuffer, DemodBufferLen);
- PrintAndLog("PSK2 demoded bitstream:");
- // Now output the bitstream to the scrollback by line of 16 bits
- printDemodBuff();
- return 1;
+ int ans=0;
+ char cmdp = param_getchar(Cmd, 0);
+ if (strlen(Cmd) > 10 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: data rawdemod p2 [clock] <0|1> [maxError]");
+ PrintAndLog(" [set clock as integer] optional, if not set, autodetect.");
+ PrintAndLog(" <invert>, 1 for invert output");
+ PrintAndLog(" [set maximum allowed errors], default = 100.");
+ PrintAndLog("");
+ PrintAndLog(" sample: data rawdemod p2 = demod a psk2 tag from GraphBuffer, autodetect clock");
+ PrintAndLog(" : data rawdemod p2 32 = demod a psk2 tag from GraphBuffer using a clock of RF/32");
+ PrintAndLog(" : data rawdemod p2 32 1 = demod a psk2 tag from GraphBuffer using a clock of RF/32 and inverting output");
+ PrintAndLog(" : data rawdemod p2 1 = demod a psk2 tag from GraphBuffer, autodetect clock and invert output");
+ PrintAndLog(" : data rawdemod p2 64 1 0 = demod a psk2 tag from GraphBuffer using a clock of RF/64, inverting output and allowing 0 demod errors");
+ return 0;
+ }
+ ans=PSKDemod(Cmd, TRUE);
+ if (!ans){
+ if (g_debugMode) PrintAndLog("Error demoding: %d",ans);
+ return 0;
+ }
+ psk1TOpsk2(DemodBuffer, DemodBufferLen);
+ PrintAndLog("PSK2 demoded bitstream:");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ printDemodBuff();
+ return 1;
}
// by marshmellow - combines all raw demod functions into one menu command
int CmdGrid(const char *Cmd)
{
- sscanf(Cmd, "%i %i", &PlotGridX, &PlotGridY);
- PlotGridXdefault= PlotGridX;
- PlotGridYdefault= PlotGridY;
- RepaintGraphWindow();
- return 0;
+ sscanf(Cmd, "%i %i", &PlotGridX, &PlotGridY);
+ PlotGridXdefault= PlotGridX;
+ PlotGridYdefault= PlotGridY;
+ RepaintGraphWindow();
+ return 0;
}
int CmdHexsamples(const char *Cmd)
{
- int i, j;
- int requested = 0;
- int offset = 0;
- char string_buf[25];
- char* string_ptr = string_buf;
- uint8_t got[BIGBUF_SIZE];
-
- sscanf(Cmd, "%i %i", &requested, &offset);
-
- /* if no args send something */
- if (requested == 0) {
- requested = 8;
- }
- if (offset + requested > sizeof(got)) {
- PrintAndLog("Tried to read past end of buffer, <bytes> + <offset> > %d", BIGBUF_SIZE);
- return 0;
- }
-
- GetFromBigBuf(got,requested,offset);
- WaitForResponse(CMD_ACK,NULL);
-
- i = 0;
- for (j = 0; j < requested; j++) {
- i++;
- string_ptr += sprintf(string_ptr, "%02x ", got[j]);
- if (i == 8) {
- *(string_ptr - 1) = '\0'; // remove the trailing space
- PrintAndLog("%s", string_buf);
- string_buf[0] = '\0';
- string_ptr = string_buf;
- i = 0;
- }
- if (j == requested - 1 && string_buf[0] != '\0') { // print any remaining bytes
- *(string_ptr - 1) = '\0';
- PrintAndLog("%s", string_buf);
- string_buf[0] = '\0';
- }
- }
- return 0;
+ int i, j;
+ int requested = 0;
+ int offset = 0;
+ char string_buf[25];
+ char* string_ptr = string_buf;
+ uint8_t got[BIGBUF_SIZE];
+
+ sscanf(Cmd, "%i %i", &requested, &offset);
+
+ /* if no args send something */
+ if (requested == 0) {
+ requested = 8;
+ }
+ if (offset + requested > sizeof(got)) {
+ PrintAndLog("Tried to read past end of buffer, <bytes> + <offset> > %d", BIGBUF_SIZE);
+ return 0;
+ }
+
+ GetFromBigBuf(got,requested,offset);
+ WaitForResponse(CMD_ACK,NULL);
+
+ i = 0;
+ for (j = 0; j < requested; j++) {
+ i++;
+ string_ptr += sprintf(string_ptr, "%02x ", got[j]);
+ if (i == 8) {
+ *(string_ptr - 1) = '\0'; // remove the trailing space
+ PrintAndLog("%s", string_buf);
+ string_buf[0] = '\0';
+ string_ptr = string_buf;
+ i = 0;
+ }
+ if (j == requested - 1 && string_buf[0] != '\0') { // print any remaining bytes
+ *(string_ptr - 1) = '\0';
+ PrintAndLog("%s", string_buf);
+ string_buf[0] = '\0';
+ }
+ }
+ return 0;
}
int CmdHide(const char *Cmd)
{
- HideGraphWindow();
- return 0;
+ HideGraphWindow();
+ return 0;
}
//zero mean GraphBuffer
int CmdHpf(const char *Cmd)
{
- int i;
- int accum = 0;
+ int i;
+ int accum = 0;
- for (i = 10; i < GraphTraceLen; ++i)
- accum += GraphBuffer[i];
- accum /= (GraphTraceLen - 10);
- for (i = 0; i < GraphTraceLen; ++i)
- GraphBuffer[i] -= accum;
+ for (i = 10; i < GraphTraceLen; ++i)
+ accum += GraphBuffer[i];
+ accum /= (GraphTraceLen - 10);
+ for (i = 0; i < GraphTraceLen; ++i)
+ GraphBuffer[i] -= accum;
- RepaintGraphWindow();
- return 0;
+ RepaintGraphWindow();
+ return 0;
}
typedef struct {
uint8_t * buffer;
int getSamples(const char *Cmd, bool silent)
{
- //If we get all but the last byte in bigbuf,
- // we don't have to worry about remaining trash
- // in the last byte in case the bits-per-sample
- // does not line up on byte boundaries
-
- uint8_t got[BIGBUF_SIZE-1] = { 0 };
-
- int n = strtol(Cmd, NULL, 0);
-
- if (n == 0)
- n = sizeof(got);
-
- if (n > sizeof(got))
- n = sizeof(got);
-
- PrintAndLog("Reading %d bytes from device memory\n", n);
- GetFromBigBuf(got,n,0);
- PrintAndLog("Data fetched");
- UsbCommand response;
- WaitForResponse(CMD_ACK, &response);
- uint8_t bits_per_sample = 8;
-
- //Old devices without this feature would send 0 at arg[0]
- if(response.arg[0] > 0)
- {
- sample_config *sc = (sample_config *) response.d.asBytes;
- PrintAndLog("Samples @ %d bits/smpl, decimation 1:%d ", sc->bits_per_sample
- , sc->decimation);
- bits_per_sample = sc->bits_per_sample;
- }
- if(bits_per_sample < 8)
- {
- PrintAndLog("Unpacking...");
- BitstreamOut bout = { got, bits_per_sample * n, 0};
- int j =0;
- for (j = 0; j * bits_per_sample < n * 8 && j < sizeof(GraphBuffer); j++) {
- uint8_t sample = getByte(bits_per_sample, &bout);
- GraphBuffer[j] = ((int) sample )- 128;
- }
- GraphTraceLen = j;
- PrintAndLog("Unpacked %d samples" , j );
- }else
- {
- for (int j = 0; j < n; j++) {
- GraphBuffer[j] = ((int)got[j]) - 128;
- }
- GraphTraceLen = n;
- }
-
- RepaintGraphWindow();
- return 0;
+ //If we get all but the last byte in bigbuf,
+ // we don't have to worry about remaining trash
+ // in the last byte in case the bits-per-sample
+ // does not line up on byte boundaries
+
+ uint8_t got[BIGBUF_SIZE-1] = { 0 };
+
+ int n = strtol(Cmd, NULL, 0);
+
+ if (n == 0)
+ n = sizeof(got);
+
+ if (n > sizeof(got))
+ n = sizeof(got);
+
+ PrintAndLog("Reading %d bytes from device memory\n", n);
+ GetFromBigBuf(got,n,0);
+ PrintAndLog("Data fetched");
+ UsbCommand response;
+ WaitForResponse(CMD_ACK, &response);
+ uint8_t bits_per_sample = 8;
+
+ //Old devices without this feature would send 0 at arg[0]
+ if(response.arg[0] > 0)
+ {
+ sample_config *sc = (sample_config *) response.d.asBytes;
+ PrintAndLog("Samples @ %d bits/smpl, decimation 1:%d ", sc->bits_per_sample
+ , sc->decimation);
+ bits_per_sample = sc->bits_per_sample;
+ }
+ if(bits_per_sample < 8)
+ {
+ PrintAndLog("Unpacking...");
+ BitstreamOut bout = { got, bits_per_sample * n, 0};
+ int j =0;
+ for (j = 0; j * bits_per_sample < n * 8 && j < sizeof(GraphBuffer); j++) {
+ uint8_t sample = getByte(bits_per_sample, &bout);
+ GraphBuffer[j] = ((int) sample )- 128;
+ }
+ GraphTraceLen = j;
+ PrintAndLog("Unpacked %d samples" , j );
+ }else
+ {
+ for (int j = 0; j < n; j++) {
+ GraphBuffer[j] = ((int)got[j]) - 128;
+ }
+ GraphTraceLen = n;
+ }
+
+ RepaintGraphWindow();
+ return 0;
}
int CmdSamples(const char *Cmd)
{
- return getSamples(Cmd, false);
+ return getSamples(Cmd, false);
}
int CmdTuneSamples(const char *Cmd)
int CmdLoad(const char *Cmd)
{
- char filename[FILE_PATH_SIZE] = {0x00};
- int len = 0;
+ char filename[FILE_PATH_SIZE] = {0x00};
+ int len = 0;
- len = strlen(Cmd);
- if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
- memcpy(filename, Cmd, len);
+ len = strlen(Cmd);
+ if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
+ memcpy(filename, Cmd, len);
- FILE *f = fopen(filename, "r");
- if (!f) {
- PrintAndLog("couldn't open '%s'", filename);
- return 0;
- }
-
- GraphTraceLen = 0;
- char line[80];
- while (fgets(line, sizeof (line), f)) {
- GraphBuffer[GraphTraceLen] = atoi(line);
- GraphTraceLen++;
- }
- fclose(f);
- PrintAndLog("loaded %d samples", GraphTraceLen);
- RepaintGraphWindow();
- return 0;
+ FILE *f = fopen(filename, "r");
+ if (!f) {
+ PrintAndLog("couldn't open '%s'", filename);
+ return 0;
+ }
+
+ GraphTraceLen = 0;
+ char line[80];
+ while (fgets(line, sizeof (line), f)) {
+ GraphBuffer[GraphTraceLen] = atoi(line);
+ GraphTraceLen++;
+ }
+ fclose(f);
+ PrintAndLog("loaded %d samples", GraphTraceLen);
+ RepaintGraphWindow();
+ return 0;
}
int CmdLtrim(const char *Cmd)
{
- int ds = atoi(Cmd);
+ int ds = atoi(Cmd);
- for (int i = ds; i < GraphTraceLen; ++i)
- GraphBuffer[i-ds] = GraphBuffer[i];
- GraphTraceLen -= ds;
+ for (int i = ds; i < GraphTraceLen; ++i)
+ GraphBuffer[i-ds] = GraphBuffer[i];
+ GraphTraceLen -= ds;
- RepaintGraphWindow();
- return 0;
+ RepaintGraphWindow();
+ return 0;
}
// trim graph to input argument length
int CmdRtrim(const char *Cmd)
{
- int ds = atoi(Cmd);
+ int ds = atoi(Cmd);
- GraphTraceLen = ds;
+ GraphTraceLen = ds;
- RepaintGraphWindow();
- return 0;
+ RepaintGraphWindow();
+ return 0;
}
/*
*/
int CmdManchesterDemod(const char *Cmd)
{
- int i, j, invert= 0;
- int bit;
- int clock;
- int lastval = 0;
- int low = 0;
- int high = 0;
- int hithigh, hitlow, first;
- int lc = 0;
- int bitidx = 0;
- int bit2idx = 0;
- int warnings = 0;
-
- /* check if we're inverting output */
- if (*Cmd == 'i')
- {
- PrintAndLog("Inverting output");
- invert = 1;
- ++Cmd;
- do
- ++Cmd;
- while(*Cmd == ' '); // in case a 2nd argument was given
- }
-
- /* Holds the decoded bitstream: each clock period contains 2 bits */
- /* later simplified to 1 bit after manchester decoding. */
- /* Add 10 bits to allow for noisy / uncertain traces without aborting */
- /* int BitStream[GraphTraceLen*2/clock+10]; */
-
- /* But it does not work if compiling on WIndows: therefore we just allocate a */
- /* large array */
- uint8_t BitStream[MAX_GRAPH_TRACE_LEN] = {0};
-
- /* Detect high and lows */
- for (i = 0; i < GraphTraceLen; i++)
- {
- if (GraphBuffer[i] > high)
- high = GraphBuffer[i];
- else if (GraphBuffer[i] < low)
- low = GraphBuffer[i];
- }
-
- /* Get our clock */
- clock = GetAskClock(Cmd, high, 1);
-
- int tolerance = clock/4;
-
- /* Detect first transition */
- /* Lo-Hi (arbitrary) */
- /* skip to the first high */
- for (i= 0; i < GraphTraceLen; i++)
- if (GraphBuffer[i] == high)
- break;
- /* now look for the first low */
- for (; i < GraphTraceLen; i++)
- {
- if (GraphBuffer[i] == low)
- {
- lastval = i;
- break;
- }
- }
-
- /* If we're not working with 1/0s, demod based off clock */
- if (high != 1)
- {
- bit = 0; /* We assume the 1st bit is zero, it may not be
- * the case: this routine (I think) has an init problem.
- * Ed.
- */
- for (; i < (int)(GraphTraceLen / clock); i++)
- {
- hithigh = 0;
- hitlow = 0;
- first = 1;
-
- /* Find out if we hit both high and low peaks */
- for (j = 0; j < clock; j++)
- {
- if (GraphBuffer[(i * clock) + j] == high)
- hithigh = 1;
- else if (GraphBuffer[(i * clock) + j] == low)
- hitlow = 1;
-
- /* it doesn't count if it's the first part of our read
- because it's really just trailing from the last sequence */
- if (first && (hithigh || hitlow))
- hithigh = hitlow = 0;
- else
- first = 0;
-
- if (hithigh && hitlow)
- break;
- }
-
- /* If we didn't hit both high and low peaks, we had a bit transition */
- if (!hithigh || !hitlow)
- bit ^= 1;
-
- BitStream[bit2idx++] = bit ^ invert;
- }
- }
-
- /* standard 1/0 bitstream */
- else
- {
-
- /* Then detect duration between 2 successive transitions */
- for (bitidx = 1; i < GraphTraceLen; i++)
- {
- if (GraphBuffer[i-1] != GraphBuffer[i])
- {
- lc = i-lastval;
- lastval = i;
-
- // Error check: if bitidx becomes too large, we do not
- // have a Manchester encoded bitstream or the clock is really
- // wrong!
- if (bitidx > (GraphTraceLen*2/clock+8) ) {
- PrintAndLog("Error: the clock you gave is probably wrong, aborting.");
- return 0;
- }
- // Then switch depending on lc length:
- // Tolerance is 1/4 of clock rate (arbitrary)
- if (abs(lc-clock/2) < tolerance) {
- // Short pulse : either "1" or "0"
- BitStream[bitidx++]=GraphBuffer[i-1];
- } else if (abs(lc-clock) < tolerance) {
- // Long pulse: either "11" or "00"
- BitStream[bitidx++]=GraphBuffer[i-1];
- BitStream[bitidx++]=GraphBuffer[i-1];
- } else {
- // Error
- warnings++;
- PrintAndLog("Warning: Manchester decode error for pulse width detection.");
- PrintAndLog("(too many of those messages mean either the stream is not Manchester encoded, or clock is wrong)");
-
- if (warnings > 10)
- {
- PrintAndLog("Error: too many detection errors, aborting.");
- return 0;
- }
- }
- }
- }
-
- // At this stage, we now have a bitstream of "01" ("1") or "10" ("0"), parse it into final decoded bitstream
- // Actually, we overwrite BitStream with the new decoded bitstream, we just need to be careful
- // to stop output at the final bitidx2 value, not bitidx
- for (i = 0; i < bitidx; i += 2) {
- if ((BitStream[i] == 0) && (BitStream[i+1] == 1)) {
- BitStream[bit2idx++] = 1 ^ invert;
- } else if ((BitStream[i] == 1) && (BitStream[i+1] == 0)) {
- BitStream[bit2idx++] = 0 ^ invert;
- } else {
- // We cannot end up in this state, this means we are unsynchronized,
- // move up 1 bit:
- i++;
- warnings++;
- PrintAndLog("Unsynchronized, resync...");
- PrintAndLog("(too many of those messages mean the stream is not Manchester encoded)");
-
- if (warnings > 10)
- {
- PrintAndLog("Error: too many decode errors, aborting.");
- return 0;
- }
- }
- }
- }
-
- PrintAndLog("Manchester decoded bitstream");
- // Now output the bitstream to the scrollback by line of 16 bits
- for (i = 0; i < (bit2idx-16); i+=16) {
- PrintAndLog("%i %i %i %i %i %i %i %i %i %i %i %i %i %i %i %i",
- BitStream[i],
- BitStream[i+1],
- BitStream[i+2],
- BitStream[i+3],
- BitStream[i+4],
- BitStream[i+5],
- BitStream[i+6],
- BitStream[i+7],
- BitStream[i+8],
- BitStream[i+9],
- BitStream[i+10],
- BitStream[i+11],
- BitStream[i+12],
- BitStream[i+13],
- BitStream[i+14],
- BitStream[i+15]);
- }
- return 0;
+ int i, j, invert= 0;
+ int bit;
+ int clock;
+ int lastval = 0;
+ int low = 0;
+ int high = 0;
+ int hithigh, hitlow, first;
+ int lc = 0;
+ int bitidx = 0;
+ int bit2idx = 0;
+ int warnings = 0;
+
+ /* check if we're inverting output */
+ if (*Cmd == 'i')
+ {
+ PrintAndLog("Inverting output");
+ invert = 1;
+ ++Cmd;
+ do
+ ++Cmd;
+ while(*Cmd == ' '); // in case a 2nd argument was given
+ }
+
+ /* Holds the decoded bitstream: each clock period contains 2 bits */
+ /* later simplified to 1 bit after manchester decoding. */
+ /* Add 10 bits to allow for noisy / uncertain traces without aborting */
+ /* int BitStream[GraphTraceLen*2/clock+10]; */
+
+ /* But it does not work if compiling on WIndows: therefore we just allocate a */
+ /* large array */
+ uint8_t BitStream[MAX_GRAPH_TRACE_LEN] = {0};
+
+ /* Detect high and lows */
+ for (i = 0; i < GraphTraceLen; i++)
+ {
+ if (GraphBuffer[i] > high)
+ high = GraphBuffer[i];
+ else if (GraphBuffer[i] < low)
+ low = GraphBuffer[i];
+ }
+
+ /* Get our clock */
+ clock = GetAskClock(Cmd, high, 1);
+
+ int tolerance = clock/4;
+
+ /* Detect first transition */
+ /* Lo-Hi (arbitrary) */
+ /* skip to the first high */
+ for (i= 0; i < GraphTraceLen; i++)
+ if (GraphBuffer[i] == high)
+ break;
+ /* now look for the first low */
+ for (; i < GraphTraceLen; i++)
+ {
+ if (GraphBuffer[i] == low)
+ {
+ lastval = i;
+ break;
+ }
+ }
+
+ /* If we're not working with 1/0s, demod based off clock */
+ if (high != 1)
+ {
+ bit = 0; /* We assume the 1st bit is zero, it may not be
+ * the case: this routine (I think) has an init problem.
+ * Ed.
+ */
+ for (; i < (int)(GraphTraceLen / clock); i++)
+ {
+ hithigh = 0;
+ hitlow = 0;
+ first = 1;
+
+ /* Find out if we hit both high and low peaks */
+ for (j = 0; j < clock; j++)
+ {
+ if (GraphBuffer[(i * clock) + j] == high)
+ hithigh = 1;
+ else if (GraphBuffer[(i * clock) + j] == low)
+ hitlow = 1;
+
+ /* it doesn't count if it's the first part of our read
+ because it's really just trailing from the last sequence */
+ if (first && (hithigh || hitlow))
+ hithigh = hitlow = 0;
+ else
+ first = 0;
+
+ if (hithigh && hitlow)
+ break;
+ }
+
+ /* If we didn't hit both high and low peaks, we had a bit transition */
+ if (!hithigh || !hitlow)
+ bit ^= 1;
+
+ BitStream[bit2idx++] = bit ^ invert;
+ }
+ }
+
+ /* standard 1/0 bitstream */
+ else
+ {
+
+ /* Then detect duration between 2 successive transitions */
+ for (bitidx = 1; i < GraphTraceLen; i++)
+ {
+ if (GraphBuffer[i-1] != GraphBuffer[i])
+ {
+ lc = i-lastval;
+ lastval = i;
+
+ // Error check: if bitidx becomes too large, we do not
+ // have a Manchester encoded bitstream or the clock is really
+ // wrong!
+ if (bitidx > (GraphTraceLen*2/clock+8) ) {
+ PrintAndLog("Error: the clock you gave is probably wrong, aborting.");
+ return 0;
+ }
+ // Then switch depending on lc length:
+ // Tolerance is 1/4 of clock rate (arbitrary)
+ if (abs(lc-clock/2) < tolerance) {
+ // Short pulse : either "1" or "0"
+ BitStream[bitidx++]=GraphBuffer[i-1];
+ } else if (abs(lc-clock) < tolerance) {
+ // Long pulse: either "11" or "00"
+ BitStream[bitidx++]=GraphBuffer[i-1];
+ BitStream[bitidx++]=GraphBuffer[i-1];
+ } else {
+ // Error
+ warnings++;
+ PrintAndLog("Warning: Manchester decode error for pulse width detection.");
+ PrintAndLog("(too many of those messages mean either the stream is not Manchester encoded, or clock is wrong)");
+
+ if (warnings > 10)
+ {
+ PrintAndLog("Error: too many detection errors, aborting.");
+ return 0;
+ }
+ }
+ }
+ }
+
+ // At this stage, we now have a bitstream of "01" ("1") or "10" ("0"), parse it into final decoded bitstream
+ // Actually, we overwrite BitStream with the new decoded bitstream, we just need to be careful
+ // to stop output at the final bitidx2 value, not bitidx
+ for (i = 0; i < bitidx; i += 2) {
+ if ((BitStream[i] == 0) && (BitStream[i+1] == 1)) {
+ BitStream[bit2idx++] = 1 ^ invert;
+ } else if ((BitStream[i] == 1) && (BitStream[i+1] == 0)) {
+ BitStream[bit2idx++] = 0 ^ invert;
+ } else {
+ // We cannot end up in this state, this means we are unsynchronized,
+ // move up 1 bit:
+ i++;
+ warnings++;
+ PrintAndLog("Unsynchronized, resync...");
+ PrintAndLog("(too many of those messages mean the stream is not Manchester encoded)");
+
+ if (warnings > 10)
+ {
+ PrintAndLog("Error: too many decode errors, aborting.");
+ return 0;
+ }
+ }
+ }
+ }
+
+ PrintAndLog("Manchester decoded bitstream");
+ // Now output the bitstream to the scrollback by line of 16 bits
+ for (i = 0; i < (bit2idx-16); i+=16) {
+ PrintAndLog("%i %i %i %i %i %i %i %i %i %i %i %i %i %i %i %i",
+ BitStream[i],
+ BitStream[i+1],
+ BitStream[i+2],
+ BitStream[i+3],
+ BitStream[i+4],
+ BitStream[i+5],
+ BitStream[i+6],
+ BitStream[i+7],
+ BitStream[i+8],
+ BitStream[i+9],
+ BitStream[i+10],
+ BitStream[i+11],
+ BitStream[i+12],
+ BitStream[i+13],
+ BitStream[i+14],
+ BitStream[i+15]);
+ }
+ return 0;
}
/* Modulate our data into manchester */
int CmdManchesterMod(const char *Cmd)
{
- int i, j;
- int clock;
- int bit, lastbit, wave;
+ int i, j;
+ int clock;
+ int bit, lastbit, wave;
- /* Get our clock */
- clock = GetAskClock(Cmd, 0, 1);
+ /* Get our clock */
+ clock = GetAskClock(Cmd, 0, 1);
- wave = 0;
- lastbit = 1;
- for (i = 0; i < (int)(GraphTraceLen / clock); i++)
- {
- bit = GraphBuffer[i * clock] ^ 1;
+ wave = 0;
+ lastbit = 1;
+ for (i = 0; i < (int)(GraphTraceLen / clock); i++)
+ {
+ bit = GraphBuffer[i * clock] ^ 1;
- for (j = 0; j < (int)(clock/2); j++)
- GraphBuffer[(i * clock) + j] = bit ^ lastbit ^ wave;
- for (j = (int)(clock/2); j < clock; j++)
- GraphBuffer[(i * clock) + j] = bit ^ lastbit ^ wave ^ 1;
+ for (j = 0; j < (int)(clock/2); j++)
+ GraphBuffer[(i * clock) + j] = bit ^ lastbit ^ wave;
+ for (j = (int)(clock/2); j < clock; j++)
+ GraphBuffer[(i * clock) + j] = bit ^ lastbit ^ wave ^ 1;
- /* Keep track of how we start our wave and if we changed or not this time */
- wave ^= bit ^ lastbit;
- lastbit = bit;
- }
+ /* Keep track of how we start our wave and if we changed or not this time */
+ wave ^= bit ^ lastbit;
+ lastbit = bit;
+ }
- RepaintGraphWindow();
- return 0;
+ RepaintGraphWindow();
+ return 0;
}
int CmdNorm(const char *Cmd)
{
- int i;
- int max = INT_MIN, min = INT_MAX;
+ int i;
+ int max = INT_MIN, min = INT_MAX;
- for (i = 10; i < GraphTraceLen; ++i) {
- if (GraphBuffer[i] > max)
- max = GraphBuffer[i];
- if (GraphBuffer[i] < min)
- min = GraphBuffer[i];
- }
+ for (i = 10; i < GraphTraceLen; ++i) {
+ if (GraphBuffer[i] > max)
+ max = GraphBuffer[i];
+ if (GraphBuffer[i] < min)
+ min = GraphBuffer[i];
+ }
- if (max != min) {
- for (i = 0; i < GraphTraceLen; ++i) {
+ if (max != min) {
+ for (i = 0; i < GraphTraceLen; ++i) {
GraphBuffer[i] = (GraphBuffer[i] - ((max + min) / 2)) * 256 /
- (max - min);
+ (max - min);
//marshmelow: adjusted *1000 to *256 to make +/- 128 so demod commands still work
- }
- }
- RepaintGraphWindow();
- return 0;
+ }
+ }
+ RepaintGraphWindow();
+ return 0;
}
int CmdPlot(const char *Cmd)
{
- ShowGraphWindow();
- return 0;
+ ShowGraphWindow();
+ return 0;
}
int CmdSave(const char *Cmd)
{
- char filename[FILE_PATH_SIZE] = {0x00};
- int len = 0;
+ char filename[FILE_PATH_SIZE] = {0x00};
+ int len = 0;
- len = strlen(Cmd);
- if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
- memcpy(filename, Cmd, len);
-
+ len = strlen(Cmd);
+ if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;
+ memcpy(filename, Cmd, len);
+
- FILE *f = fopen(filename, "w");
- if(!f) {
- PrintAndLog("couldn't open '%s'", filename);
- return 0;
- }
- int i;
- for (i = 0; i < GraphTraceLen; i++) {
- fprintf(f, "%d\n", GraphBuffer[i]);
- }
- fclose(f);
- PrintAndLog("saved to '%s'", Cmd);
- return 0;
+ FILE *f = fopen(filename, "w");
+ if(!f) {
+ PrintAndLog("couldn't open '%s'", filename);
+ return 0;
+ }
+ int i;
+ for (i = 0; i < GraphTraceLen; i++) {
+ fprintf(f, "%d\n", GraphBuffer[i]);
+ }
+ fclose(f);
+ PrintAndLog("saved to '%s'", Cmd);
+ return 0;
}
int CmdScale(const char *Cmd)
{
- CursorScaleFactor = atoi(Cmd);
- if (CursorScaleFactor == 0) {
- PrintAndLog("bad, can't have zero scale");
- CursorScaleFactor = 1;
- }
- RepaintGraphWindow();
- return 0;
+ CursorScaleFactor = atoi(Cmd);
+ if (CursorScaleFactor == 0) {
+ PrintAndLog("bad, can't have zero scale");
+ CursorScaleFactor = 1;
+ }
+ RepaintGraphWindow();
+ return 0;
}
int CmdThreshold(const char *Cmd)
{
- int threshold = atoi(Cmd);
+ int threshold = atoi(Cmd);
- for (int i = 0; i < GraphTraceLen; ++i) {
- if (GraphBuffer[i] >= threshold)
- GraphBuffer[i] = 1;
- else
- GraphBuffer[i] = -1;
- }
- RepaintGraphWindow();
- return 0;
+ for (int i = 0; i < GraphTraceLen; ++i) {
+ if (GraphBuffer[i] >= threshold)
+ GraphBuffer[i] = 1;
+ else
+ GraphBuffer[i] = -1;
+ }
+ RepaintGraphWindow();
+ return 0;
}
int CmdDirectionalThreshold(const char *Cmd)
{
- int8_t upThres = param_get8(Cmd, 0);
- int8_t downThres = param_get8(Cmd, 1);
-
- printf("Applying Up Threshold: %d, Down Threshold: %d\n", upThres, downThres);
-
- int lastValue = GraphBuffer[0];
- GraphBuffer[0] = 0; // Will be changed at the end, but init 0 as we adjust to last samples value if no threshold kicks in.
-
- for (int i = 1; i < GraphTraceLen; ++i) {
- // Apply first threshold to samples heading up
- if (GraphBuffer[i] >= upThres && GraphBuffer[i] > lastValue)
- {
- lastValue = GraphBuffer[i]; // Buffer last value as we overwrite it.
- GraphBuffer[i] = 1;
- }
- // Apply second threshold to samples heading down
- else if (GraphBuffer[i] <= downThres && GraphBuffer[i] < lastValue)
- {
- lastValue = GraphBuffer[i]; // Buffer last value as we overwrite it.
- GraphBuffer[i] = -1;
- }
- else
- {
- lastValue = GraphBuffer[i]; // Buffer last value as we overwrite it.
- GraphBuffer[i] = GraphBuffer[i-1];
-
- }
- }
- GraphBuffer[0] = GraphBuffer[1]; // Aline with first edited sample.
- RepaintGraphWindow();
- return 0;
+ int8_t upThres = param_get8(Cmd, 0);
+ int8_t downThres = param_get8(Cmd, 1);
+
+ printf("Applying Up Threshold: %d, Down Threshold: %d\n", upThres, downThres);
+
+ int lastValue = GraphBuffer[0];
+ GraphBuffer[0] = 0; // Will be changed at the end, but init 0 as we adjust to last samples value if no threshold kicks in.
+
+ for (int i = 1; i < GraphTraceLen; ++i) {
+ // Apply first threshold to samples heading up
+ if (GraphBuffer[i] >= upThres && GraphBuffer[i] > lastValue)
+ {
+ lastValue = GraphBuffer[i]; // Buffer last value as we overwrite it.
+ GraphBuffer[i] = 1;
+ }
+ // Apply second threshold to samples heading down
+ else if (GraphBuffer[i] <= downThres && GraphBuffer[i] < lastValue)
+ {
+ lastValue = GraphBuffer[i]; // Buffer last value as we overwrite it.
+ GraphBuffer[i] = -1;
+ }
+ else
+ {
+ lastValue = GraphBuffer[i]; // Buffer last value as we overwrite it.
+ GraphBuffer[i] = GraphBuffer[i-1];
+
+ }
+ }
+ GraphBuffer[0] = GraphBuffer[1]; // Aline with first edited sample.
+ RepaintGraphWindow();
+ return 0;
}
int CmdZerocrossings(const char *Cmd)
{
- // Zero-crossings aren't meaningful unless the signal is zero-mean.
- CmdHpf("");
-
- int sign = 1;
- int zc = 0;
- int lastZc = 0;
-
- for (int i = 0; i < GraphTraceLen; ++i) {
- if (GraphBuffer[i] * sign >= 0) {
- // No change in sign, reproduce the previous sample count.
- zc++;
- GraphBuffer[i] = lastZc;
- } else {
- // Change in sign, reset the sample count.
- sign = -sign;
- GraphBuffer[i] = lastZc;
- if (sign > 0) {
- lastZc = zc;
- zc = 0;
- }
- }
- }
-
- RepaintGraphWindow();
- return 0;
+ // Zero-crossings aren't meaningful unless the signal is zero-mean.
+ CmdHpf("");
+
+ int sign = 1;
+ int zc = 0;
+ int lastZc = 0;
+
+ for (int i = 0; i < GraphTraceLen; ++i) {
+ if (GraphBuffer[i] * sign >= 0) {
+ // No change in sign, reproduce the previous sample count.
+ zc++;
+ GraphBuffer[i] = lastZc;
+ } else {
+ // Change in sign, reset the sample count.
+ sign = -sign;
+ GraphBuffer[i] = lastZc;
+ if (sign > 0) {
+ lastZc = zc;
+ zc = 0;
+ }
+ }
+ }
+
+ RepaintGraphWindow();
+ return 0;
}
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1, "This help"},
- {"amp", CmdAmp, 1, "Amplify peaks"},
- //{"askdemod", Cmdaskdemod, 1, "<0 or 1> -- Attempt to demodulate simple ASK tags"},
- {"askedgedetect", CmdAskEdgeDetect, 1, "[threshold] Adjust Graph for manual ask demod using length of sample differences to detect the edge of a wave (default = 25)"},
- {"askem410xdemod", CmdAskEM410xDemod, 1, "[clock] [invert<0|1>] [maxErr] -- Demodulate an EM410x tag from GraphBuffer (args optional)"},
- {"askgproxiidemod", CmdG_Prox_II_Demod, 1, "Demodulate a G Prox II tag from GraphBuffer"},
- {"autocorr", CmdAutoCorr, 1, "[window length] [g] -- Autocorrelation over window - g to save back to GraphBuffer (overwrite)"},
- {"biphaserawdecode",CmdBiphaseDecodeRaw,1,"[offset] [invert<0|1>] Biphase decode bin stream in DemodBuffer (offset = 0|1 bits to shift the decode start)"},
- {"bitsamples", CmdBitsamples, 0, "Get raw samples as bitstring"},
- //{"bitstream", CmdBitstream, 1, "[clock rate] -- Convert waveform into a bitstream"},
- {"buffclear", CmdBuffClear, 1, "Clear sample buffer and graph window"},
- {"dec", CmdDec, 1, "Decimate samples"},
- {"detectclock", CmdDetectClockRate, 1, "[modulation] Detect clock rate of wave in GraphBuffer (options: 'a','f','n','p' for ask, fsk, nrz, psk respectively)"},
- //{"fskdemod", CmdFSKdemod, 1, "Demodulate graph window as a HID FSK"},
- {"fskawiddemod", CmdFSKdemodAWID, 1, "Demodulate an AWID FSK tag from GraphBuffer"},
- //{"fskfcdetect", CmdFSKfcDetect, 1, "Try to detect the Field Clock of an FSK wave"},
- {"fskhiddemod", CmdFSKdemodHID, 1, "Demodulate a HID FSK tag from GraphBuffer"},
- {"fskiodemod", CmdFSKdemodIO, 1, "Demodulate an IO Prox FSK tag from GraphBuffer"},
- {"fskpyramiddemod", CmdFSKdemodPyramid, 1, "Demodulate a Pyramid FSK tag from GraphBuffer"},
- {"fskparadoxdemod", CmdFSKdemodParadox, 1, "Demodulate a Paradox FSK tag from GraphBuffer"},
- {"getbitstream", CmdGetBitStream, 1, "Convert GraphBuffer's >=1 values to 1 and <1 to 0"},
- {"grid", CmdGrid, 1, "<x> <y> -- overlay grid on graph window, use zero value to turn off either"},
- {"hexsamples", CmdHexsamples, 0, "<bytes> [<offset>] -- Dump big buffer as hex bytes"},
- {"hide", CmdHide, 1, "Hide graph window"},
- {"hpf", CmdHpf, 1, "Remove DC offset from trace"},
- {"load", CmdLoad, 1, "<filename> -- Load trace (to graph window"},
- {"ltrim", CmdLtrim, 1, "<samples> -- Trim samples from left of trace"},
- {"rtrim", CmdRtrim, 1, "<location to end trace> -- Trim samples from right of trace"},
- //{"mandemod", CmdManchesterDemod, 1, "[i] [clock rate] -- Manchester demodulate binary stream (option 'i' to invert output)"},
- {"manrawdecode", Cmdmandecoderaw, 1, "Manchester decode binary stream in DemodBuffer"},
- {"manmod", CmdManchesterMod, 1, "[clock rate] -- Manchester modulate a binary stream"},
- {"norm", CmdNorm, 1, "Normalize max/min to +/-128"},
- {"plot", CmdPlot, 1, "Show graph window (hit 'h' in window for keystroke help)"},
- {"printdemodbuffer",CmdPrintDemodBuff, 1, "[x] -- print the data in the DemodBuffer - 'x' for hex output"},
- {"pskindalademod", CmdIndalaDecode, 1, "[clock] [invert<0|1>] -- Demodulate an indala tag (PSK1) from GraphBuffer (args optional)"},
- {"rawdemod", CmdRawDemod, 1, "[modulation] ... <options> -see help (h option) -- Demodulate the data in the GraphBuffer and output binary"},
- {"samples", CmdSamples, 0, "[512 - 40000] -- Get raw samples for graph window (GraphBuffer)"},
- {"save", CmdSave, 1, "<filename> -- Save trace (from graph window)"},
- {"scale", CmdScale, 1, "<int> -- Set cursor display scale"},
- {"setdebugmode", CmdSetDebugMode, 1, "<0|1> -- Turn on or off Debugging Mode for demods"},
- {"shiftgraphzero", CmdGraphShiftZero, 1, "<shift> -- Shift 0 for Graphed wave + or - shift value"},
- //{"threshold", CmdThreshold, 1, "<threshold> -- Maximize/minimize every value in the graph window depending on threshold"},
- {"dirthreshold", CmdDirectionalThreshold, 1, "<thres up> <thres down> -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev."},
- {"tune", CmdTuneSamples, 0, "Get hw tune samples for graph window"},
- {"undec", CmdUndec, 1, "Un-decimate samples by 2"},
- {"zerocrossings", CmdZerocrossings, 1, "Count time between zero-crossings"},
- {NULL, NULL, 0, NULL}
+ {"help", CmdHelp, 1, "This help"},
+ {"amp", CmdAmp, 1, "Amplify peaks"},
+ //{"askdemod", Cmdaskdemod, 1, "<0 or 1> -- Attempt to demodulate simple ASK tags"},
+ {"askedgedetect", CmdAskEdgeDetect, 1, "[threshold] Adjust Graph for manual ask demod using length of sample differences to detect the edge of a wave (default = 25)"},
+ {"askem410xdemod", CmdAskEM410xDemod, 1, "[clock] [invert<0|1>] [maxErr] -- Demodulate an EM410x tag from GraphBuffer (args optional)"},
+ {"askgproxiidemod", CmdG_Prox_II_Demod, 1, "Demodulate a G Prox II tag from GraphBuffer"},
+ {"autocorr", CmdAutoCorr, 1, "[window length] [g] -- Autocorrelation over window - g to save back to GraphBuffer (overwrite)"},
+ {"biphaserawdecode",CmdBiphaseDecodeRaw,1,"[offset] [invert<0|1>] Biphase decode bin stream in DemodBuffer (offset = 0|1 bits to shift the decode start)"},
+ {"bitsamples", CmdBitsamples, 0, "Get raw samples as bitstring"},
+ //{"bitstream", CmdBitstream, 1, "[clock rate] -- Convert waveform into a bitstream"},
+ {"buffclear", CmdBuffClear, 1, "Clear sample buffer and graph window"},
+ {"dec", CmdDec, 1, "Decimate samples"},
+ {"detectclock", CmdDetectClockRate, 1, "[modulation] Detect clock rate of wave in GraphBuffer (options: 'a','f','n','p' for ask, fsk, nrz, psk respectively)"},
+ //{"fskdemod", CmdFSKdemod, 1, "Demodulate graph window as a HID FSK"},
+ {"fskawiddemod", CmdFSKdemodAWID, 1, "Demodulate an AWID FSK tag from GraphBuffer"},
+ //{"fskfcdetect", CmdFSKfcDetect, 1, "Try to detect the Field Clock of an FSK wave"},
+ {"fskhiddemod", CmdFSKdemodHID, 1, "Demodulate a HID FSK tag from GraphBuffer"},
+ {"fskiodemod", CmdFSKdemodIO, 1, "Demodulate an IO Prox FSK tag from GraphBuffer"},
+ {"fskpyramiddemod", CmdFSKdemodPyramid, 1, "Demodulate a Pyramid FSK tag from GraphBuffer"},
+ {"fskparadoxdemod", CmdFSKdemodParadox, 1, "Demodulate a Paradox FSK tag from GraphBuffer"},
+ {"getbitstream", CmdGetBitStream, 1, "Convert GraphBuffer's >=1 values to 1 and <1 to 0"},
+ {"grid", CmdGrid, 1, "<x> <y> -- overlay grid on graph window, use zero value to turn off either"},
+ {"hexsamples", CmdHexsamples, 0, "<bytes> [<offset>] -- Dump big buffer as hex bytes"},
+ {"hide", CmdHide, 1, "Hide graph window"},
+ {"hpf", CmdHpf, 1, "Remove DC offset from trace"},
+ {"load", CmdLoad, 1, "<filename> -- Load trace (to graph window"},
+ {"ltrim", CmdLtrim, 1, "<samples> -- Trim samples from left of trace"},
+ {"rtrim", CmdRtrim, 1, "<location to end trace> -- Trim samples from right of trace"},
+ //{"mandemod", CmdManchesterDemod, 1, "[i] [clock rate] -- Manchester demodulate binary stream (option 'i' to invert output)"},
+ {"manrawdecode", Cmdmandecoderaw, 1, "Manchester decode binary stream in DemodBuffer"},
+ {"manmod", CmdManchesterMod, 1, "[clock rate] -- Manchester modulate a binary stream"},
+ {"norm", CmdNorm, 1, "Normalize max/min to +/-128"},
+ {"plot", CmdPlot, 1, "Show graph window (hit 'h' in window for keystroke help)"},
+ {"printdemodbuffer",CmdPrintDemodBuff, 1, "[x] -- print the data in the DemodBuffer - 'x' for hex output"},
+ {"pskindalademod", CmdIndalaDecode, 1, "[clock] [invert<0|1>] -- Demodulate an indala tag (PSK1) from GraphBuffer (args optional)"},
+ {"rawdemod", CmdRawDemod, 1, "[modulation] ... <options> -see help (h option) -- Demodulate the data in the GraphBuffer and output binary"},
+ {"samples", CmdSamples, 0, "[512 - 40000] -- Get raw samples for graph window (GraphBuffer)"},
+ {"save", CmdSave, 1, "<filename> -- Save trace (from graph window)"},
+ {"scale", CmdScale, 1, "<int> -- Set cursor display scale"},
+ {"setdebugmode", CmdSetDebugMode, 1, "<0|1> -- Turn on or off Debugging Mode for demods"},
+ {"shiftgraphzero", CmdGraphShiftZero, 1, "<shift> -- Shift 0 for Graphed wave + or - shift value"},
+ //{"threshold", CmdThreshold, 1, "<threshold> -- Maximize/minimize every value in the graph window depending on threshold"},
+ {"dirthreshold", CmdDirectionalThreshold, 1, "<thres up> <thres down> -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev."},
+ {"tune", CmdTuneSamples, 0, "Get hw tune samples for graph window"},
+ {"undec", CmdUndec, 1, "Un-decimate samples by 2"},
+ {"zerocrossings", CmdZerocrossings, 1, "Count time between zero-crossings"},
+ {NULL, NULL, 0, NULL}
};
int CmdData(const char *Cmd)
{
- CmdsParse(CommandTable, Cmd);
- return 0;
+ CmdsParse(CommandTable, Cmd);
+ return 0;
}
int CmdHelp(const char *Cmd)
{
- CmdsHelp(CommandTable);
- return 0;
+ CmdsHelp(CommandTable);
+ return 0;
}
/* send a command before reading */
int CmdLFCommandRead(const char *Cmd)
{
- static char dummy[3];
+ static char dummy[3];
- dummy[0]= ' ';
+ dummy[0]= ' ';
- UsbCommand c = {CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K};
- sscanf(Cmd, "%"lli" %"lli" %"lli" %s %s", &c.arg[0], &c.arg[1], &c.arg[2],(char*)(&c.d.asBytes),(char*)(&dummy+1));
- // in case they specified 'h'
- strcpy((char *)&c.d.asBytes + strlen((char *)c.d.asBytes), dummy);
- SendCommand(&c);
- return 0;
+ UsbCommand c = {CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K};
+ sscanf(Cmd, "%"lli" %"lli" %"lli" %s %s", &c.arg[0], &c.arg[1], &c.arg[2],(char*)(&c.d.asBytes),(char*)(&dummy+1));
+ // in case they specified 'h'
+ strcpy((char *)&c.d.asBytes + strlen((char *)c.d.asBytes), dummy);
+ SendCommand(&c);
+ return 0;
}
int CmdFlexdemod(const char *Cmd)
{
- int i;
- for (i = 0; i < GraphTraceLen; ++i) {
- if (GraphBuffer[i] < 0) {
- GraphBuffer[i] = -1;
- } else {
- GraphBuffer[i] = 1;
- }
- }
+ int i;
+ for (i = 0; i < GraphTraceLen; ++i) {
+ if (GraphBuffer[i] < 0) {
+ GraphBuffer[i] = -1;
+ } else {
+ GraphBuffer[i] = 1;
+ }
+ }
#define LONG_WAIT 100
- int start;
- for (start = 0; start < GraphTraceLen - LONG_WAIT; start++) {
- int first = GraphBuffer[start];
- for (i = start; i < start + LONG_WAIT; i++) {
- if (GraphBuffer[i] != first) {
- break;
- }
- }
- if (i == (start + LONG_WAIT)) {
- break;
- }
- }
- if (start == GraphTraceLen - LONG_WAIT) {
- PrintAndLog("nothing to wait for");
- return 0;
- }
-
- GraphBuffer[start] = 2;
- GraphBuffer[start+1] = -2;
+ int start;
+ for (start = 0; start < GraphTraceLen - LONG_WAIT; start++) {
+ int first = GraphBuffer[start];
+ for (i = start; i < start + LONG_WAIT; i++) {
+ if (GraphBuffer[i] != first) {
+ break;
+ }
+ }
+ if (i == (start + LONG_WAIT)) {
+ break;
+ }
+ }
+ if (start == GraphTraceLen - LONG_WAIT) {
+ PrintAndLog("nothing to wait for");
+ return 0;
+ }
+
+ GraphBuffer[start] = 2;
+ GraphBuffer[start+1] = -2;
uint8_t bits[64] = {0x00};
int bit, sum;
- i = start;
- for (bit = 0; bit < 64; bit++) {
+ i = start;
+ for (bit = 0; bit < 64; bit++) {
sum = 0;
for (int j = 0; j < 16; j++) {
- sum += GraphBuffer[i++];
- }
+ sum += GraphBuffer[i++];
+ }
bits[bit] = (sum > 0) ? 1 : 0;
- PrintAndLog("bit %d sum %d", bit, sum);
- }
-
- for (bit = 0; bit < 64; bit++) {
- int j;
- int sum = 0;
- for (j = 0; j < 16; j++) {
- sum += GraphBuffer[i++];
- }
- if (sum > 0 && bits[bit] != 1) {
- PrintAndLog("oops1 at %d", bit);
- }
- if (sum < 0 && bits[bit] != 0) {
- PrintAndLog("oops2 at %d", bit);
- }
- }
+ PrintAndLog("bit %d sum %d", bit, sum);
+ }
+
+ for (bit = 0; bit < 64; bit++) {
+ int j;
+ int sum = 0;
+ for (j = 0; j < 16; j++) {
+ sum += GraphBuffer[i++];
+ }
+ if (sum > 0 && bits[bit] != 1) {
+ PrintAndLog("oops1 at %d", bit);
+ }
+ if (sum < 0 && bits[bit] != 0) {
+ PrintAndLog("oops2 at %d", bit);
+ }
+ }
// HACK writing back to graphbuffer.
- GraphTraceLen = 32*64;
- i = 0;
- int phase = 0;
- for (bit = 0; bit < 64; bit++) {
+ GraphTraceLen = 32*64;
+ i = 0;
+ int phase = 0;
+ for (bit = 0; bit < 64; bit++) {
phase = (bits[bit] == 0) ? 0 : 1;
- int j;
- for (j = 0; j < 32; j++) {
- GraphBuffer[i++] = phase;
- phase = !phase;
- }
- }
-
- RepaintGraphWindow();
- return 0;
+ int j;
+ for (j = 0; j < 32; j++) {
+ GraphBuffer[i++] = phase;
+ phase = !phase;
+ }
+ }
+
+ RepaintGraphWindow();
+ return 0;
}
-
+
int CmdIndalaDemod(const char *Cmd)
{
- // Usage: recover 64bit UID by default, specify "224" as arg to recover a 224bit UID
+ // Usage: recover 64bit UID by default, specify "224" as arg to recover a 224bit UID
- int state = -1;
- int count = 0;
- int i, j;
+ int state = -1;
+ int count = 0;
+ int i, j;
- // worst case with GraphTraceLen=64000 is < 4096
- // under normal conditions it's < 2048
+ // worst case with GraphTraceLen=64000 is < 4096
+ // under normal conditions it's < 2048
- uint8_t rawbits[4096];
- int rawbit = 0;
- int worst = 0, worstPos = 0;
+ uint8_t rawbits[4096];
+ int rawbit = 0;
+ int worst = 0, worstPos = 0;
// PrintAndLog("Expecting a bit less than %d raw bits", GraphTraceLen / 32);
- for (i = 0; i < GraphTraceLen-1; i += 2) {
- count += 1;
- if ((GraphBuffer[i] > GraphBuffer[i + 1]) && (state != 1)) {
- if (state == 0) {
- for (j = 0; j < count - 8; j += 16) {
- rawbits[rawbit++] = 0;
- }
- if ((abs(count - j)) > worst) {
- worst = abs(count - j);
- worstPos = i;
- }
- }
- state = 1;
- count = 0;
- } else if ((GraphBuffer[i] < GraphBuffer[i + 1]) && (state != 0)) {
- if (state == 1) {
- for (j = 0; j < count - 8; j += 16) {
- rawbits[rawbit++] = 1;
- }
- if ((abs(count - j)) > worst) {
- worst = abs(count - j);
- worstPos = i;
- }
- }
- state = 0;
- count = 0;
- }
- }
-
- if (rawbit>0){
- PrintAndLog("Recovered %d raw bits, expected: %d", rawbit, GraphTraceLen/32);
- PrintAndLog("worst metric (0=best..7=worst): %d at pos %d", worst, worstPos);
+ for (i = 0; i < GraphTraceLen-1; i += 2) {
+ count += 1;
+ if ((GraphBuffer[i] > GraphBuffer[i + 1]) && (state != 1)) {
+ if (state == 0) {
+ for (j = 0; j < count - 8; j += 16) {
+ rawbits[rawbit++] = 0;
+ }
+ if ((abs(count - j)) > worst) {
+ worst = abs(count - j);
+ worstPos = i;
+ }
+ }
+ state = 1;
+ count = 0;
+ } else if ((GraphBuffer[i] < GraphBuffer[i + 1]) && (state != 0)) {
+ if (state == 1) {
+ for (j = 0; j < count - 8; j += 16) {
+ rawbits[rawbit++] = 1;
+ }
+ if ((abs(count - j)) > worst) {
+ worst = abs(count - j);
+ worstPos = i;
+ }
+ }
+ state = 0;
+ count = 0;
+ }
+ }
+
+ if (rawbit>0){
+ PrintAndLog("Recovered %d raw bits, expected: %d", rawbit, GraphTraceLen/32);
+ PrintAndLog("worst metric (0=best..7=worst): %d at pos %d", worst, worstPos);
} else {
return 0;
}
- // Finding the start of a UID
- int uidlen, long_wait;
- if (strcmp(Cmd, "224") == 0) {
- uidlen = 224;
- long_wait = 30;
- } else {
- uidlen = 64;
- long_wait = 29;
- }
-
- int start;
- int first = 0;
- for (start = 0; start <= rawbit - uidlen; start++) {
- first = rawbits[start];
- for (i = start; i < start + long_wait; i++) {
- if (rawbits[i] != first) {
- break;
- }
- }
- if (i == (start + long_wait)) {
- break;
- }
- }
-
- if (start == rawbit - uidlen + 1) {
- PrintAndLog("nothing to wait for");
- return 0;
- }
-
- // Inverting signal if needed
- if (first == 1) {
- for (i = start; i < rawbit; i++) {
- rawbits[i] = !rawbits[i];
- }
- }
-
- // Dumping UID
+ // Finding the start of a UID
+ int uidlen, long_wait;
+ if (strcmp(Cmd, "224") == 0) {
+ uidlen = 224;
+ long_wait = 30;
+ } else {
+ uidlen = 64;
+ long_wait = 29;
+ }
+
+ int start;
+ int first = 0;
+ for (start = 0; start <= rawbit - uidlen; start++) {
+ first = rawbits[start];
+ for (i = start; i < start + long_wait; i++) {
+ if (rawbits[i] != first) {
+ break;
+ }
+ }
+ if (i == (start + long_wait)) {
+ break;
+ }
+ }
+
+ if (start == rawbit - uidlen + 1) {
+ PrintAndLog("nothing to wait for");
+ return 0;
+ }
+
+ // Inverting signal if needed
+ if (first == 1) {
+ for (i = start; i < rawbit; i++) {
+ rawbits[i] = !rawbits[i];
+ }
+ }
+
+ // Dumping UID
uint8_t bits[224] = {0x00};
char showbits[225] = {0x00};
- int bit;
- i = start;
- int times = 0;
+ int bit;
+ i = start;
+ int times = 0;
+
+ if (uidlen > rawbit) {
+ PrintAndLog("Warning: not enough raw bits to get a full UID");
+ for (bit = 0; bit < rawbit; bit++) {
+ bits[bit] = rawbits[i++];
+ // As we cannot know the parity, let's use "." and "/"
+ showbits[bit] = '.' + bits[bit];
+ }
+ showbits[bit+1]='\0';
+ PrintAndLog("Partial UID=%s", showbits);
+ return 0;
+ } else {
+ for (bit = 0; bit < uidlen; bit++) {
+ bits[bit] = rawbits[i++];
+ showbits[bit] = '0' + bits[bit];
+ }
+ times = 1;
+ }
- if (uidlen > rawbit) {
- PrintAndLog("Warning: not enough raw bits to get a full UID");
- for (bit = 0; bit < rawbit; bit++) {
- bits[bit] = rawbits[i++];
- // As we cannot know the parity, let's use "." and "/"
- showbits[bit] = '.' + bits[bit];
- }
- showbits[bit+1]='\0';
- PrintAndLog("Partial UID=%s", showbits);
- return 0;
- } else {
- for (bit = 0; bit < uidlen; bit++) {
- bits[bit] = rawbits[i++];
- showbits[bit] = '0' + bits[bit];
- }
- times = 1;
- }
-
- //convert UID to HEX
- uint32_t uid1, uid2, uid3, uid4, uid5, uid6, uid7;
- int idx;
+ //convert UID to HEX
+ uint32_t uid1, uid2, uid3, uid4, uid5, uid6, uid7;
+ int idx;
uid1 = uid2 = 0;
- if (uidlen==64){
- for( idx=0; idx<64; idx++) {
- if (showbits[idx] == '0') {
- uid1=(uid1<<1)|(uid2>>31);
- uid2=(uid2<<1)|0;
- } else {
- uid1=(uid1<<1)|(uid2>>31);
- uid2=(uid2<<1)|1;
- }
- }
- PrintAndLog("UID=%s (%x%08x)", showbits, uid1, uid2);
- }
- else {
+ if (uidlen==64){
+ for( idx=0; idx<64; idx++) {
+ if (showbits[idx] == '0') {
+ uid1=(uid1<<1)|(uid2>>31);
+ uid2=(uid2<<1)|0;
+ } else {
+ uid1=(uid1<<1)|(uid2>>31);
+ uid2=(uid2<<1)|1;
+ }
+ }
+ PrintAndLog("UID=%s (%x%08x)", showbits, uid1, uid2);
+ }
+ else {
uid3 = uid4 = uid5 = uid6 = uid7 = 0;
- for( idx=0; idx<224; idx++) {
- uid1=(uid1<<1)|(uid2>>31);
- uid2=(uid2<<1)|(uid3>>31);
- uid3=(uid3<<1)|(uid4>>31);
- uid4=(uid4<<1)|(uid5>>31);
- uid5=(uid5<<1)|(uid6>>31);
- uid6=(uid6<<1)|(uid7>>31);
+ for( idx=0; idx<224; idx++) {
+ uid1=(uid1<<1)|(uid2>>31);
+ uid2=(uid2<<1)|(uid3>>31);
+ uid3=(uid3<<1)|(uid4>>31);
+ uid4=(uid4<<1)|(uid5>>31);
+ uid5=(uid5<<1)|(uid6>>31);
+ uid6=(uid6<<1)|(uid7>>31);
if (showbits[idx] == '0')
uid7 = (uid7<<1) | 0;
else
uid7 = (uid7<<1) | 1;
- }
- PrintAndLog("UID=%s (%x%08x%08x%08x%08x%08x%08x)", showbits, uid1, uid2, uid3, uid4, uid5, uid6, uid7);
- }
+ }
+ PrintAndLog("UID=%s (%x%08x%08x%08x%08x%08x%08x)", showbits, uid1, uid2, uid3, uid4, uid5, uid6, uid7);
+ }
- // Checking UID against next occurrences
- int failed = 0;
+ // Checking UID against next occurrences
+ int failed = 0;
for (; i + uidlen <= rawbit;) {
failed = 0;
- for (bit = 0; bit < uidlen; bit++) {
- if (bits[bit] != rawbits[i++]) {
- failed = 1;
- break;
- }
- }
- if (failed == 1) {
- break;
- }
- times += 1;
- }
-
- PrintAndLog("Occurrences: %d (expected %d)", times, (rawbit - start) / uidlen);
-
- // Remodulating for tag cloning
+ for (bit = 0; bit < uidlen; bit++) {
+ if (bits[bit] != rawbits[i++]) {
+ failed = 1;
+ break;
+ }
+ }
+ if (failed == 1) {
+ break;
+ }
+ times += 1;
+ }
+
+ PrintAndLog("Occurrences: %d (expected %d)", times, (rawbit - start) / uidlen);
+
+ // Remodulating for tag cloning
// HACK: 2015-01-04 this will have an impact on our new way of seening lf commands (demod)
// since this changes graphbuffer data.
- GraphTraceLen = 32*uidlen;
- i = 0;
- int phase = 0;
- for (bit = 0; bit < uidlen; bit++) {
- if (bits[bit] == 0) {
- phase = 0;
- } else {
- phase = 1;
- }
- int j;
- for (j = 0; j < 32; j++) {
- GraphBuffer[i++] = phase;
- phase = !phase;
- }
- }
-
- RepaintGraphWindow();
- return 1;
+ GraphTraceLen = 32*uidlen;
+ i = 0;
+ int phase = 0;
+ for (bit = 0; bit < uidlen; bit++) {
+ if (bits[bit] == 0) {
+ phase = 0;
+ } else {
+ phase = 1;
+ }
+ int j;
+ for (j = 0; j < 32; j++) {
+ GraphBuffer[i++] = phase;
+ phase = !phase;
+ }
+ }
+
+ RepaintGraphWindow();
+ return 1;
}
int CmdIndalaClone(const char *Cmd)
{
- UsbCommand c;
+ UsbCommand c;
unsigned int uid1, uid2, uid3, uid4, uid5, uid6, uid7;
uid1 = uid2 = uid3 = uid4 = uid5 = uid6 = uid7 = 0;
- int n = 0, i = 0;
-
- if (strchr(Cmd,'l') != 0) {
- while (sscanf(&Cmd[i++], "%1x", &n ) == 1) {
- uid1 = (uid1 << 4) | (uid2 >> 28);
- uid2 = (uid2 << 4) | (uid3 >> 28);
- uid3 = (uid3 << 4) | (uid4 >> 28);
- uid4 = (uid4 << 4) | (uid5 >> 28);
- uid5 = (uid5 << 4) | (uid6 >> 28);
- uid6 = (uid6 << 4) | (uid7 >> 28);
- uid7 = (uid7 << 4) | (n & 0xf);
- }
- PrintAndLog("Cloning 224bit tag with UID %x%08x%08x%08x%08x%08x%08x", uid1, uid2, uid3, uid4, uid5, uid6, uid7);
- c.cmd = CMD_INDALA_CLONE_TAG_L;
- c.d.asDwords[0] = uid1;
- c.d.asDwords[1] = uid2;
- c.d.asDwords[2] = uid3;
- c.d.asDwords[3] = uid4;
- c.d.asDwords[4] = uid5;
- c.d.asDwords[5] = uid6;
- c.d.asDwords[6] = uid7;
+ int n = 0, i = 0;
+
+ if (strchr(Cmd,'l') != 0) {
+ while (sscanf(&Cmd[i++], "%1x", &n ) == 1) {
+ uid1 = (uid1 << 4) | (uid2 >> 28);
+ uid2 = (uid2 << 4) | (uid3 >> 28);
+ uid3 = (uid3 << 4) | (uid4 >> 28);
+ uid4 = (uid4 << 4) | (uid5 >> 28);
+ uid5 = (uid5 << 4) | (uid6 >> 28);
+ uid6 = (uid6 << 4) | (uid7 >> 28);
+ uid7 = (uid7 << 4) | (n & 0xf);
+ }
+ PrintAndLog("Cloning 224bit tag with UID %x%08x%08x%08x%08x%08x%08x", uid1, uid2, uid3, uid4, uid5, uid6, uid7);
+ c.cmd = CMD_INDALA_CLONE_TAG_L;
+ c.d.asDwords[0] = uid1;
+ c.d.asDwords[1] = uid2;
+ c.d.asDwords[2] = uid3;
+ c.d.asDwords[3] = uid4;
+ c.d.asDwords[4] = uid5;
+ c.d.asDwords[5] = uid6;
+ c.d.asDwords[6] = uid7;
} else {
- while (sscanf(&Cmd[i++], "%1x", &n ) == 1) {
- uid1 = (uid1 << 4) | (uid2 >> 28);
- uid2 = (uid2 << 4) | (n & 0xf);
- }
- PrintAndLog("Cloning 64bit tag with UID %x%08x", uid1, uid2);
- c.cmd = CMD_INDALA_CLONE_TAG;
- c.arg[0] = uid1;
- c.arg[1] = uid2;
- }
-
- SendCommand(&c);
- return 0;
+ while (sscanf(&Cmd[i++], "%1x", &n ) == 1) {
+ uid1 = (uid1 << 4) | (uid2 >> 28);
+ uid2 = (uid2 << 4) | (n & 0xf);
+ }
+ PrintAndLog("Cloning 64bit tag with UID %x%08x", uid1, uid2);
+ c.cmd = CMD_INDALA_CLONE_TAG;
+ c.arg[0] = uid1;
+ c.arg[1] = uid2;
+ }
+
+ SendCommand(&c);
+ return 0;
}
int usage_lf_read()
static void ChkBitstream(const char *str)
{
- int i;
+ int i;
- /* convert to bitstream if necessary */
+ /* convert to bitstream if necessary */
for (i = 0; i < (int)(GraphTraceLen / 2); i++){
if (GraphBuffer[i] > 1 || GraphBuffer[i] < 0) {
- CmdGetBitStream("");
- break;
- }
- }
+ CmdGetBitStream("");
+ break;
+ }
+ }
}
//appears to attempt to simulate manchester
int CmdLFSim(const char *Cmd)
{
- int i,j;
- static int gap;
+ int i,j;
+ static int gap;
- sscanf(Cmd, "%i", &gap);
+ sscanf(Cmd, "%i", &gap);
- /* convert to bitstream if necessary */
+ /* convert to bitstream if necessary */
- ChkBitstream(Cmd);
+ ChkBitstream(Cmd);
- //can send 512 bits at a time (1 byte sent per bit...)
- printf("Sending [%d bytes]", GraphTraceLen);
- for (i = 0; i < GraphTraceLen; i += USB_CMD_DATA_SIZE) {
- UsbCommand c={CMD_DOWNLOADED_SIM_SAMPLES_125K, {i, 0, 0}};
+ //can send 512 bits at a time (1 byte sent per bit...)
+ printf("Sending [%d bytes]", GraphTraceLen);
+ for (i = 0; i < GraphTraceLen; i += USB_CMD_DATA_SIZE) {
+ UsbCommand c={CMD_DOWNLOADED_SIM_SAMPLES_125K, {i, 0, 0}};
- for (j = 0; j < USB_CMD_DATA_SIZE; j++) {
- c.d.asBytes[j] = GraphBuffer[i+j];
- }
- SendCommand(&c);
- WaitForResponse(CMD_ACK,NULL);
- printf(".");
- }
+ for (j = 0; j < USB_CMD_DATA_SIZE; j++) {
+ c.d.asBytes[j] = GraphBuffer[i+j];
+ }
+ SendCommand(&c);
+ WaitForResponse(CMD_ACK,NULL);
+ printf(".");
+ }
- printf("\n");
- PrintAndLog("Starting to simulate");
- UsbCommand c = {CMD_SIMULATE_TAG_125K, {GraphTraceLen, gap, 0}};
- SendCommand(&c);
- return 0;
+ printf("\n");
+ PrintAndLog("Starting to simulate");
+ UsbCommand c = {CMD_SIMULATE_TAG_125K, {GraphTraceLen, gap, 0}};
+ SendCommand(&c);
+ return 0;
}
int usage_lf_simfsk(void)
{
- //print help
- PrintAndLog("Usage: lf simfsk [c <clock>] [i] [H <fcHigh>] [L <fcLow>] [d <hexdata>]");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
- PrintAndLog(" i invert data");
- PrintAndLog(" H <fcHigh> Manually set the larger Field Clock");
- PrintAndLog(" L <fcLow> Manually set the smaller Field Clock");
- //PrintAndLog(" s TBD- -to enable a gap between playback repetitions - default: no gap");
- PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
- PrintAndLog("\n NOTE: if you set one clock manually set them all manually");
- return 0;
+ //print help
+ PrintAndLog("Usage: lf simfsk [c <clock>] [i] [H <fcHigh>] [L <fcLow>] [d <hexdata>]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
+ PrintAndLog(" i invert data");
+ PrintAndLog(" H <fcHigh> Manually set the larger Field Clock");
+ PrintAndLog(" L <fcLow> Manually set the smaller Field Clock");
+ //PrintAndLog(" s TBD- -to enable a gap between playback repetitions - default: no gap");
+ PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
+ PrintAndLog("\n NOTE: if you set one clock manually set them all manually");
+ return 0;
}
int usage_lf_simask(void)
{
- //print help
- PrintAndLog("Usage: lf simask [c <clock>] [i] [b|m|r] [s] [d <raw hex to sim>]");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
- PrintAndLog(" i invert data");
- PrintAndLog(" b sim ask/biphase");
- PrintAndLog(" m sim ask/manchester - Default");
- PrintAndLog(" r sim ask/raw");
- PrintAndLog(" s TBD- -to enable a gap between playback repetitions - default: no gap");
- PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
- return 0;
+ //print help
+ PrintAndLog("Usage: lf simask [c <clock>] [i] [b|m|r] [s] [d <raw hex to sim>]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
+ PrintAndLog(" i invert data");
+ PrintAndLog(" b sim ask/biphase");
+ PrintAndLog(" m sim ask/manchester - Default");
+ PrintAndLog(" r sim ask/raw");
+ PrintAndLog(" s TBD- -to enable a gap between playback repetitions - default: no gap");
+ PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
+ return 0;
}
int usage_lf_simpsk(void)
{
- //print help
- PrintAndLog("Usage: lf simpsk [1|2|3] [c <clock>] [i] [r <carrier>] [d <raw hex to sim>]");
- PrintAndLog("Options: ");
- PrintAndLog(" h This help");
- PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
- PrintAndLog(" i invert data");
- PrintAndLog(" 1 set PSK1 (default)");
- PrintAndLog(" 2 set PSK2");
- PrintAndLog(" 3 set PSK3");
- PrintAndLog(" r <carrier> 2|4|8 are valid carriers: default = 2");
- PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
- return 0;
+ //print help
+ PrintAndLog("Usage: lf simpsk [1|2|3] [c <clock>] [i] [r <carrier>] [d <raw hex to sim>]");
+ PrintAndLog("Options: ");
+ PrintAndLog(" h This help");
+ PrintAndLog(" c <clock> Manually set clock - can autodetect if using DemodBuffer");
+ PrintAndLog(" i invert data");
+ PrintAndLog(" 1 set PSK1 (default)");
+ PrintAndLog(" 2 set PSK2");
+ PrintAndLog(" 3 set PSK3");
+ PrintAndLog(" r <carrier> 2|4|8 are valid carriers: default = 2");
+ PrintAndLog(" d <hexdata> Data to sim as hex - omit to sim from DemodBuffer");
+ return 0;
}
// by marshmellow - sim ask data given clock, fcHigh, fcLow, invert
// - allow pull data from DemodBuffer
int CmdLFfskSim(const char *Cmd)
{
- //might be able to autodetect FC and clock from Graphbuffer if using demod buffer
- //will need FChigh, FClow, Clock, and bitstream
- uint8_t fcHigh=0, fcLow=0, clk=0;
- uint8_t invert=0;
- bool errors = FALSE;
- char hexData[32] = {0x00}; // store entered hex data
- uint8_t data[255] = {0x00};
- int dataLen = 0;
- uint8_t cmdp = 0;
- while(param_getchar(Cmd, cmdp) != 0x00)
- {
- switch(param_getchar(Cmd, cmdp))
- {
- case 'h':
- return usage_lf_simfsk();
- case 'i':
- invert = 1;
- cmdp++;
- break;
- case 'c':
- errors |= param_getdec(Cmd,cmdp+1,&clk);
- cmdp+=2;
- break;
- case 'H':
- errors |= param_getdec(Cmd,cmdp+1,&fcHigh);
- cmdp+=2;
- break;
- case 'L':
- errors |= param_getdec(Cmd,cmdp+1,&fcLow);
- cmdp+=2;
- break;
- //case 's':
- // separator=1;
- // cmdp++;
- // break;
- case 'd':
- dataLen = param_getstr(Cmd, cmdp+1, hexData);
- if (dataLen==0) {
- errors=TRUE;
- } else {
- dataLen = hextobinarray((char *)data, hexData);
- }
- if (dataLen==0) errors=TRUE;
- if (errors) PrintAndLog ("Error getting hex data");
- cmdp+=2;
- break;
- default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
- errors = TRUE;
- break;
- }
- if(errors) break;
- }
- if(cmdp == 0 && DemodBufferLen == 0)
- {
- errors = TRUE;// No args
- }
-
- //Validations
- if(errors)
- {
- return usage_lf_simfsk();
- }
-
- if (dataLen == 0){ //using DemodBuffer
- if (clk==0 || fcHigh==0 || fcLow==0){ //manual settings must set them all
- uint8_t ans = fskClocks(&fcHigh, &fcLow, &clk, 0);
- if (ans==0){
- if (!fcHigh) fcHigh=10;
- if (!fcLow) fcLow=8;
- if (!clk) clk=50;
- }
- }
- } else {
- setDemodBuf(data, dataLen, 0);
- }
- if (clk == 0) clk = 50;
- if (fcHigh == 0) fcHigh = 10;
- if (fcLow == 0) fcLow = 8;
-
- uint16_t arg1, arg2;
- arg1 = fcHigh << 8 | fcLow;
- arg2 = invert << 8 | clk;
- size_t size = DemodBufferLen;
- if (size > USB_CMD_DATA_SIZE) {
- PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
- size = USB_CMD_DATA_SIZE;
- }
- UsbCommand c = {CMD_FSK_SIM_TAG, {arg1, arg2, size}};
-
- memcpy(c.d.asBytes, DemodBuffer, size);
- SendCommand(&c);
- return 0;
+ //might be able to autodetect FC and clock from Graphbuffer if using demod buffer
+ //will need FChigh, FClow, Clock, and bitstream
+ uint8_t fcHigh=0, fcLow=0, clk=0;
+ uint8_t invert=0;
+ bool errors = FALSE;
+ char hexData[32] = {0x00}; // store entered hex data
+ uint8_t data[255] = {0x00};
+ int dataLen = 0;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ return usage_lf_simfsk();
+ case 'i':
+ invert = 1;
+ cmdp++;
+ break;
+ case 'c':
+ errors |= param_getdec(Cmd,cmdp+1,&clk);
+ cmdp+=2;
+ break;
+ case 'H':
+ errors |= param_getdec(Cmd,cmdp+1,&fcHigh);
+ cmdp+=2;
+ break;
+ case 'L':
+ errors |= param_getdec(Cmd,cmdp+1,&fcLow);
+ cmdp+=2;
+ break;
+ //case 's':
+ // separator=1;
+ // cmdp++;
+ // break;
+ case 'd':
+ dataLen = param_getstr(Cmd, cmdp+1, hexData);
+ if (dataLen==0) {
+ errors=TRUE;
+ } else {
+ dataLen = hextobinarray((char *)data, hexData);
+ }
+ if (dataLen==0) errors=TRUE;
+ if (errors) PrintAndLog ("Error getting hex data");
+ cmdp+=2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = TRUE;
+ break;
+ }
+ if(errors) break;
+ }
+ if(cmdp == 0 && DemodBufferLen == 0)
+ {
+ errors = TRUE;// No args
+ }
+
+ //Validations
+ if(errors)
+ {
+ return usage_lf_simfsk();
+ }
+
+ if (dataLen == 0){ //using DemodBuffer
+ if (clk==0 || fcHigh==0 || fcLow==0){ //manual settings must set them all
+ uint8_t ans = fskClocks(&fcHigh, &fcLow, &clk, 0);
+ if (ans==0){
+ if (!fcHigh) fcHigh=10;
+ if (!fcLow) fcLow=8;
+ if (!clk) clk=50;
+ }
+ }
+ } else {
+ setDemodBuf(data, dataLen, 0);
+ }
+ if (clk == 0) clk = 50;
+ if (fcHigh == 0) fcHigh = 10;
+ if (fcLow == 0) fcLow = 8;
+
+ uint16_t arg1, arg2;
+ arg1 = fcHigh << 8 | fcLow;
+ arg2 = invert << 8 | clk;
+ size_t size = DemodBufferLen;
+ if (size > USB_CMD_DATA_SIZE) {
+ PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
+ size = USB_CMD_DATA_SIZE;
+ }
+ UsbCommand c = {CMD_FSK_SIM_TAG, {arg1, arg2, size}};
+
+ memcpy(c.d.asBytes, DemodBuffer, size);
+ SendCommand(&c);
+ return 0;
}
// by marshmellow - sim ask data given clock, invert, manchester or raw, separator
// - allow pull data from DemodBuffer
int CmdLFaskSim(const char *Cmd)
{
- //autodetect clock from Graphbuffer if using demod buffer
- //will need clock, invert, manchester/raw as m or r, separator as s, and bitstream
- uint8_t encoding = 1, separator = 0;
- //char cmdp = Cmd[0], par3='m', par4=0;
- uint8_t clk=0, invert=0;
- bool errors = FALSE;
- char hexData[32] = {0x00};
- uint8_t data[255]= {0x00}; // store entered hex data
- int dataLen = 0;
- uint8_t cmdp = 0;
- while(param_getchar(Cmd, cmdp) != 0x00)
- {
- switch(param_getchar(Cmd, cmdp))
- {
- case 'h':
- return usage_lf_simask();
- case 'i':
- invert = 1;
- cmdp++;
- break;
- case 'c':
- errors |= param_getdec(Cmd,cmdp+1,&clk);
- cmdp+=2;
- break;
- case 'b':
- encoding=2; //biphase
- cmdp++;
- break;
- case 'm':
- encoding=1;
- cmdp++;
- break;
- case 'r':
- encoding=0;
- cmdp++;
- break;
- case 's':
- separator=1;
- cmdp++;
- break;
- case 'd':
- dataLen = param_getstr(Cmd, cmdp+1, hexData);
- if (dataLen==0) {
- errors=TRUE;
- } else {
- dataLen = hextobinarray((char *)data, hexData);
- }
- if (dataLen==0) errors=TRUE;
- if (errors) PrintAndLog ("Error getting hex data, datalen: %d",dataLen);
- cmdp+=2;
- break;
- default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
- errors = TRUE;
- break;
- }
- if(errors) break;
- }
- if(cmdp == 0 && DemodBufferLen == 0)
- {
- errors = TRUE;// No args
- }
-
- //Validations
- if(errors)
- {
- return usage_lf_simask();
- }
- if (dataLen == 0){ //using DemodBuffer
- if (clk == 0) clk = GetAskClock("0", false, false);
- } else {
- setDemodBuf(data, dataLen, 0);
- }
- if (clk == 0) clk = 64;
- if (encoding == 0) clk = clk/2; //askraw needs to double the clock speed
- uint16_t arg1, arg2;
- size_t size=DemodBufferLen;
- arg1 = clk << 8 | encoding;
- arg2 = invert << 8 | separator;
- if (size > USB_CMD_DATA_SIZE) {
- PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
- size = USB_CMD_DATA_SIZE;
- }
- UsbCommand c = {CMD_ASK_SIM_TAG, {arg1, arg2, size}};
- PrintAndLog("preparing to sim ask data: %d bits", size);
- memcpy(c.d.asBytes, DemodBuffer, size);
- SendCommand(&c);
- return 0;
+ //autodetect clock from Graphbuffer if using demod buffer
+ //will need clock, invert, manchester/raw as m or r, separator as s, and bitstream
+ uint8_t encoding = 1, separator = 0;
+ //char cmdp = Cmd[0], par3='m', par4=0;
+ uint8_t clk=0, invert=0;
+ bool errors = FALSE;
+ char hexData[32] = {0x00};
+ uint8_t data[255]= {0x00}; // store entered hex data
+ int dataLen = 0;
+ uint8_t cmdp = 0;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ return usage_lf_simask();
+ case 'i':
+ invert = 1;
+ cmdp++;
+ break;
+ case 'c':
+ errors |= param_getdec(Cmd,cmdp+1,&clk);
+ cmdp+=2;
+ break;
+ case 'b':
+ encoding=2; //biphase
+ cmdp++;
+ break;
+ case 'm':
+ encoding=1;
+ cmdp++;
+ break;
+ case 'r':
+ encoding=0;
+ cmdp++;
+ break;
+ case 's':
+ separator=1;
+ cmdp++;
+ break;
+ case 'd':
+ dataLen = param_getstr(Cmd, cmdp+1, hexData);
+ if (dataLen==0) {
+ errors=TRUE;
+ } else {
+ dataLen = hextobinarray((char *)data, hexData);
+ }
+ if (dataLen==0) errors=TRUE;
+ if (errors) PrintAndLog ("Error getting hex data, datalen: %d",dataLen);
+ cmdp+=2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = TRUE;
+ break;
+ }
+ if(errors) break;
+ }
+ if(cmdp == 0 && DemodBufferLen == 0)
+ {
+ errors = TRUE;// No args
+ }
+
+ //Validations
+ if(errors)
+ {
+ return usage_lf_simask();
+ }
+ if (dataLen == 0){ //using DemodBuffer
+ if (clk == 0) clk = GetAskClock("0", false, false);
+ } else {
+ setDemodBuf(data, dataLen, 0);
+ }
+ if (clk == 0) clk = 64;
+ if (encoding == 0) clk = clk/2; //askraw needs to double the clock speed
+ uint16_t arg1, arg2;
+ size_t size=DemodBufferLen;
+ arg1 = clk << 8 | encoding;
+ arg2 = invert << 8 | separator;
+ if (size > USB_CMD_DATA_SIZE) {
+ PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
+ size = USB_CMD_DATA_SIZE;
+ }
+ UsbCommand c = {CMD_ASK_SIM_TAG, {arg1, arg2, size}};
+ PrintAndLog("preparing to sim ask data: %d bits", size);
+ memcpy(c.d.asBytes, DemodBuffer, size);
+ SendCommand(&c);
+ return 0;
}
// by marshmellow - sim psk data given carrier, clock, invert
// - allow pull data from DemodBuffer or parameters
int CmdLFpskSim(const char *Cmd)
{
- //might be able to autodetect FC and clock from Graphbuffer if using demod buffer
- //will need carrier, Clock, and bitstream
- uint8_t carrier=0, clk=0;
- uint8_t invert=0;
- bool errors = FALSE;
- char hexData[32] = {0x00}; // store entered hex data
- uint8_t data[255] = {0x00};
- int dataLen = 0;
- uint8_t cmdp = 0;
- uint8_t pskType = 1;
- while(param_getchar(Cmd, cmdp) != 0x00)
- {
- switch(param_getchar(Cmd, cmdp))
- {
- case 'h':
- return usage_lf_simpsk();
- case 'i':
- invert = 1;
- cmdp++;
- break;
- case 'c':
- errors |= param_getdec(Cmd,cmdp+1,&clk);
- cmdp+=2;
- break;
- case 'r':
- errors |= param_getdec(Cmd,cmdp+1,&carrier);
- cmdp+=2;
- break;
- case '1':
- pskType=1;
- cmdp++;
- break;
- case '2':
- pskType=2;
- cmdp++;
- break;
- case '3':
- pskType=3;
- cmdp++;
- break;
- case 'd':
- dataLen = param_getstr(Cmd, cmdp+1, hexData);
- if (dataLen==0) {
- errors=TRUE;
- } else {
- dataLen = hextobinarray((char *)data, hexData);
- }
- if (dataLen==0) errors=TRUE;
- if (errors) PrintAndLog ("Error getting hex data");
- cmdp+=2;
- break;
- default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
- errors = TRUE;
- break;
- }
- if (errors) break;
- }
- if (cmdp == 0 && DemodBufferLen == 0)
- {
- errors = TRUE;// No args
- }
-
- //Validations
- if (errors)
- {
- return usage_lf_simpsk();
- }
- if (dataLen == 0){ //using DemodBuffer
- PrintAndLog("Getting Clocks");
- if (clk==0) clk = GetPskClock("", FALSE, FALSE);
- PrintAndLog("clk: %d",clk);
- if (!carrier) carrier = GetPskCarrier("", FALSE, FALSE);
- PrintAndLog("carrier: %d", carrier);
- } else {
- setDemodBuf(data, dataLen, 0);
- }
-
- if (clk <= 0) clk = 32;
- if (carrier == 0) carrier = 2;
- if (pskType != 1){
- if (pskType == 2){
- //need to convert psk2 to psk1 data before sim
- psk2TOpsk1(DemodBuffer, DemodBufferLen);
- } else {
- PrintAndLog("Sorry, PSK3 not yet available");
- }
- }
- uint16_t arg1, arg2;
- arg1 = clk << 8 | carrier;
- arg2 = invert;
- size_t size=DemodBufferLen;
- if (size > USB_CMD_DATA_SIZE) {
- PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
- size=USB_CMD_DATA_SIZE;
- }
- UsbCommand c = {CMD_PSK_SIM_TAG, {arg1, arg2, size}};
- PrintAndLog("DEBUG: Sending DemodBuffer Length: %d", size);
- memcpy(c.d.asBytes, DemodBuffer, size);
- SendCommand(&c);
-
- return 0;
+ //might be able to autodetect FC and clock from Graphbuffer if using demod buffer
+ //will need carrier, Clock, and bitstream
+ uint8_t carrier=0, clk=0;
+ uint8_t invert=0;
+ bool errors = FALSE;
+ char hexData[32] = {0x00}; // store entered hex data
+ uint8_t data[255] = {0x00};
+ int dataLen = 0;
+ uint8_t cmdp = 0;
+ uint8_t pskType = 1;
+ while(param_getchar(Cmd, cmdp) != 0x00)
+ {
+ switch(param_getchar(Cmd, cmdp))
+ {
+ case 'h':
+ return usage_lf_simpsk();
+ case 'i':
+ invert = 1;
+ cmdp++;
+ break;
+ case 'c':
+ errors |= param_getdec(Cmd,cmdp+1,&clk);
+ cmdp+=2;
+ break;
+ case 'r':
+ errors |= param_getdec(Cmd,cmdp+1,&carrier);
+ cmdp+=2;
+ break;
+ case '1':
+ pskType=1;
+ cmdp++;
+ break;
+ case '2':
+ pskType=2;
+ cmdp++;
+ break;
+ case '3':
+ pskType=3;
+ cmdp++;
+ break;
+ case 'd':
+ dataLen = param_getstr(Cmd, cmdp+1, hexData);
+ if (dataLen==0) {
+ errors=TRUE;
+ } else {
+ dataLen = hextobinarray((char *)data, hexData);
+ }
+ if (dataLen==0) errors=TRUE;
+ if (errors) PrintAndLog ("Error getting hex data");
+ cmdp+=2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = TRUE;
+ break;
+ }
+ if (errors) break;
+ }
+ if (cmdp == 0 && DemodBufferLen == 0)
+ {
+ errors = TRUE;// No args
+ }
+
+ //Validations
+ if (errors)
+ {
+ return usage_lf_simpsk();
+ }
+ if (dataLen == 0){ //using DemodBuffer
+ PrintAndLog("Getting Clocks");
+ if (clk==0) clk = GetPskClock("", FALSE, FALSE);
+ PrintAndLog("clk: %d",clk);
+ if (!carrier) carrier = GetPskCarrier("", FALSE, FALSE);
+ PrintAndLog("carrier: %d", carrier);
+ } else {
+ setDemodBuf(data, dataLen, 0);
+ }
+
+ if (clk <= 0) clk = 32;
+ if (carrier == 0) carrier = 2;
+ if (pskType != 1){
+ if (pskType == 2){
+ //need to convert psk2 to psk1 data before sim
+ psk2TOpsk1(DemodBuffer, DemodBufferLen);
+ } else {
+ PrintAndLog("Sorry, PSK3 not yet available");
+ }
+ }
+ uint16_t arg1, arg2;
+ arg1 = clk << 8 | carrier;
+ arg2 = invert;
+ size_t size=DemodBufferLen;
+ if (size > USB_CMD_DATA_SIZE) {
+ PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE);
+ size=USB_CMD_DATA_SIZE;
+ }
+ UsbCommand c = {CMD_PSK_SIM_TAG, {arg1, arg2, size}};
+ PrintAndLog("DEBUG: Sending DemodBuffer Length: %d", size);
+ memcpy(c.d.asBytes, DemodBuffer, size);
+ SendCommand(&c);
+
+ return 0;
}
int CmdLFSimBidir(const char *Cmd)
{
- // Set ADC to twice the carrier for a slight supersampling
- // HACK: not implemented in ARMSRC.
- PrintAndLog("Not implemented yet.");
- UsbCommand c = {CMD_LF_SIMULATE_BIDIR, {47, 384, 0}};
- SendCommand(&c);
- return 0;
+ // Set ADC to twice the carrier for a slight supersampling
+ // HACK: not implemented in ARMSRC.
+ PrintAndLog("Not implemented yet.");
+ UsbCommand c = {CMD_LF_SIMULATE_BIDIR, {47, 384, 0}};
+ SendCommand(&c);
+ return 0;
}
/* simulate an LF Manchester encoded tag with specified bitstream, clock rate and inter-id gap */
/*
int CmdLFSimManchester(const char *Cmd)
{
- static int clock, gap;
- static char data[1024], gapstring[8];
+ static int clock, gap;
+ static char data[1024], gapstring[8];
- sscanf(Cmd, "%i %s %i", &clock, &data[0], &gap);
+ sscanf(Cmd, "%i %s %i", &clock, &data[0], &gap);
- ClearGraph(0);
+ ClearGraph(0);
- for (int i = 0; i < strlen(data) ; ++i)
- AppendGraph(0, clock, data[i]- '0');
+ for (int i = 0; i < strlen(data) ; ++i)
+ AppendGraph(0, clock, data[i]- '0');
- CmdManchesterMod("");
+ CmdManchesterMod("");
- RepaintGraphWindow();
+ RepaintGraphWindow();
- sprintf(&gapstring[0], "%i", gap);
- CmdLFSim(gapstring);
- return 0;
+ sprintf(&gapstring[0], "%i", gap);
+ CmdLFSim(gapstring);
+ return 0;
}
*/
int CmdVchDemod(const char *Cmd)
{
- // Is this the entire sync pattern, or does this also include some
- // data bits that happen to be the same everywhere? That would be
- // lovely to know.
- static const int SyncPattern[] = {
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- };
-
- // So first, we correlate for the sync pattern, and mark that.
- int bestCorrel = 0, bestPos = 0;
- int i;
- // It does us no good to find the sync pattern, with fewer than
- // 2048 samples after it...
- for (i = 0; i < (GraphTraceLen-2048); i++) {
- int sum = 0;
- int j;
- for (j = 0; j < arraylen(SyncPattern); j++) {
- sum += GraphBuffer[i+j]*SyncPattern[j];
- }
- if (sum > bestCorrel) {
- bestCorrel = sum;
- bestPos = i;
- }
- }
- PrintAndLog("best sync at %d [metric %d]", bestPos, bestCorrel);
-
- char bits[257];
- bits[256] = '\0';
-
- int worst = INT_MAX;
- int worstPos = 0;
-
- for (i = 0; i < 2048; i += 8) {
- int sum = 0;
- int j;
- for (j = 0; j < 8; j++) {
- sum += GraphBuffer[bestPos+i+j];
- }
- if (sum < 0) {
- bits[i/8] = '.';
- } else {
- bits[i/8] = '1';
- }
- if(abs(sum) < worst) {
- worst = abs(sum);
- worstPos = i;
- }
- }
- PrintAndLog("bits:");
- PrintAndLog("%s", bits);
- PrintAndLog("worst metric: %d at pos %d", worst, worstPos);
-
- if (strcmp(Cmd, "clone")==0) {
- GraphTraceLen = 0;
- char *s;
- for(s = bits; *s; s++) {
- int j;
- for(j = 0; j < 16; j++) {
- GraphBuffer[GraphTraceLen++] = (*s == '1') ? 1 : 0;
- }
- }
- RepaintGraphWindow();
- }
- return 0;
+ // Is this the entire sync pattern, or does this also include some
+ // data bits that happen to be the same everywhere? That would be
+ // lovely to know.
+ static const int SyncPattern[] = {
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ };
+
+ // So first, we correlate for the sync pattern, and mark that.
+ int bestCorrel = 0, bestPos = 0;
+ int i;
+ // It does us no good to find the sync pattern, with fewer than
+ // 2048 samples after it...
+ for (i = 0; i < (GraphTraceLen-2048); i++) {
+ int sum = 0;
+ int j;
+ for (j = 0; j < arraylen(SyncPattern); j++) {
+ sum += GraphBuffer[i+j]*SyncPattern[j];
+ }
+ if (sum > bestCorrel) {
+ bestCorrel = sum;
+ bestPos = i;
+ }
+ }
+ PrintAndLog("best sync at %d [metric %d]", bestPos, bestCorrel);
+
+ char bits[257];
+ bits[256] = '\0';
+
+ int worst = INT_MAX;
+ int worstPos = 0;
+
+ for (i = 0; i < 2048; i += 8) {
+ int sum = 0;
+ int j;
+ for (j = 0; j < 8; j++) {
+ sum += GraphBuffer[bestPos+i+j];
+ }
+ if (sum < 0) {
+ bits[i/8] = '.';
+ } else {
+ bits[i/8] = '1';
+ }
+ if(abs(sum) < worst) {
+ worst = abs(sum);
+ worstPos = i;
+ }
+ }
+ PrintAndLog("bits:");
+ PrintAndLog("%s", bits);
+ PrintAndLog("worst metric: %d at pos %d", worst, worstPos);
+
+ if (strcmp(Cmd, "clone")==0) {
+ GraphTraceLen = 0;
+ char *s;
+ for(s = bits; *s; s++) {
+ int j;
+ for(j = 0; j < 16; j++) {
+ GraphBuffer[GraphTraceLen++] = (*s == '1') ? 1 : 0;
+ }
+ }
+ RepaintGraphWindow();
+ }
+ return 0;
}
//by marshmellow
int CmdLFfind(const char *Cmd)
{
- int ans=0;
- char cmdp = param_getchar(Cmd, 0);
- char testRaw = param_getchar(Cmd, 1);
- if (strlen(Cmd) > 3 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: lf search <0|1> [u]");
- PrintAndLog(" <use data from Graphbuffer> , if not set, try reading data from tag.");
- PrintAndLog(" [Search for Unknown tags] , if not set, reads only known tags.");
- PrintAndLog("");
- PrintAndLog(" sample: lf search = try reading data from tag & search for known tags");
- PrintAndLog(" : lf search 1 = use data from GraphBuffer & search for known tags");
- PrintAndLog(" : lf search u = try reading data from tag & search for known and unknown tags");
- PrintAndLog(" : lf search 1 u = use data from GraphBuffer & search for known and unknown tags");
-
- return 0;
- }
-
- if (!offline && (cmdp != '1')){
- ans=CmdLFRead("");
- ans=CmdSamples("20000");
- } else if (GraphTraceLen < 1000) {
- PrintAndLog("Data in Graphbuffer was too small.");
- return 0;
- }
- if (cmdp == 'u' || cmdp == 'U') testRaw = 'u';
-
- PrintAndLog("NOTE: some demods output possible binary\n if it finds something that looks like a tag");
- PrintAndLog("False Positives ARE possible\n");
- PrintAndLog("\nChecking for known tags:\n");
-
- ans=CmdFSKdemodIO("");
- if (ans>0) {
- PrintAndLog("\nValid IO Prox ID Found!");
- return 1;
- }
-
- ans=CmdFSKdemodPyramid("");
- if (ans>0) {
- PrintAndLog("\nValid Pyramid ID Found!");
- return 1;
- }
-
- ans=CmdFSKdemodParadox("");
- if (ans>0) {
- PrintAndLog("\nValid Paradox ID Found!");
- return 1;
- }
-
- ans=CmdFSKdemodAWID("");
- if (ans>0) {
- PrintAndLog("\nValid AWID ID Found!");
- return 1;
- }
-
- ans=CmdFSKdemodHID("");
- if (ans>0) {
- PrintAndLog("\nValid HID Prox ID Found!");
- return 1;
- }
-
- //add psk and indala
- ans=CmdIndalaDecode("");
- if (ans>0) {
- PrintAndLog("\nValid Indala ID Found!");
- return 1;
- }
-
- ans=CmdAskEM410xDemod("");
- if (ans>0) {
- PrintAndLog("\nValid EM410x ID Found!");
- return 1;
- }
-
- ans=CmdG_Prox_II_Demod("");
- if (ans>0) {
- PrintAndLog("\nValid G Prox II ID Found!");
- return 1;
- }
-
- PrintAndLog("\nNo Known Tags Found!\n");
- if (testRaw=='u' || testRaw=='U'){
- //test unknown tag formats (raw mode)
- PrintAndLog("\nChecking for Unknown tags:\n");
- ans=AutoCorrelate(4000, FALSE, FALSE);
- if (ans > 0) PrintAndLog("Possible Auto Correlation of %d repeating samples",ans);
- ans=GetFskClock("",FALSE,FALSE); //CmdDetectClockRate("F"); //
- if (ans != 0){ //fsk
- ans=FSKrawDemod("",FALSE);
- if (ans>0) {
- PrintAndLog("\nUnknown FSK Modulated Tag Found!");
- printDemodBuff();
- return 1;
- }
- }
- ans=ASKmanDemod("",FALSE,FALSE);
- if (ans>0) {
- PrintAndLog("\nUnknown ASK Modulated and Manchester encoded Tag Found!");
- PrintAndLog("\nif it does not look right it could instead be ASK/Biphase - try 'data rawdemod ab'");
- printDemodBuff();
- return 1;
- }
- ans=CmdPSK1rawDemod("");
- if (ans>0) {
- PrintAndLog("Possible unknown PSK1 Modulated Tag Found above!\n\nCould also be PSK2 - try 'data rawdemod p2'");
- PrintAndLog("\nCould also be PSK3 - [currently not supported]");
- PrintAndLog("\nCould also be NRZ - try 'data nrzrawdemod");
- printDemodBuff();
- return 1;
- }
- PrintAndLog("\nNo Data Found!\n");
- }
- return 0;
+ int ans=0;
+ char cmdp = param_getchar(Cmd, 0);
+ char testRaw = param_getchar(Cmd, 1);
+ if (strlen(Cmd) > 3 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog("Usage: lf search <0|1> [u]");
+ PrintAndLog(" <use data from Graphbuffer> , if not set, try reading data from tag.");
+ PrintAndLog(" [Search for Unknown tags] , if not set, reads only known tags.");
+ PrintAndLog("");
+ PrintAndLog(" sample: lf search = try reading data from tag & search for known tags");
+ PrintAndLog(" : lf search 1 = use data from GraphBuffer & search for known tags");
+ PrintAndLog(" : lf search u = try reading data from tag & search for known and unknown tags");
+ PrintAndLog(" : lf search 1 u = use data from GraphBuffer & search for known and unknown tags");
+
+ return 0;
+ }
+
+ if (!offline && (cmdp != '1')){
+ ans=CmdLFRead("");
+ ans=CmdSamples("20000");
+ } else if (GraphTraceLen < 1000) {
+ PrintAndLog("Data in Graphbuffer was too small.");
+ return 0;
+ }
+ if (cmdp == 'u' || cmdp == 'U') testRaw = 'u';
+
+ PrintAndLog("NOTE: some demods output possible binary\n if it finds something that looks like a tag");
+ PrintAndLog("False Positives ARE possible\n");
+ PrintAndLog("\nChecking for known tags:\n");
+
+ ans=CmdFSKdemodIO("");
+ if (ans>0) {
+ PrintAndLog("\nValid IO Prox ID Found!");
+ return 1;
+ }
+
+ ans=CmdFSKdemodPyramid("");
+ if (ans>0) {
+ PrintAndLog("\nValid Pyramid ID Found!");
+ return 1;
+ }
+
+ ans=CmdFSKdemodParadox("");
+ if (ans>0) {
+ PrintAndLog("\nValid Paradox ID Found!");
+ return 1;
+ }
+
+ ans=CmdFSKdemodAWID("");
+ if (ans>0) {
+ PrintAndLog("\nValid AWID ID Found!");
+ return 1;
+ }
+
+ ans=CmdFSKdemodHID("");
+ if (ans>0) {
+ PrintAndLog("\nValid HID Prox ID Found!");
+ return 1;
+ }
+
+ //add psk and indala
+ ans=CmdIndalaDecode("");
+ if (ans>0) {
+ PrintAndLog("\nValid Indala ID Found!");
+ return 1;
+ }
+
+ ans=CmdAskEM410xDemod("");
+ if (ans>0) {
+ PrintAndLog("\nValid EM410x ID Found!");
+ return 1;
+ }
+
+ ans=CmdG_Prox_II_Demod("");
+ if (ans>0) {
+ PrintAndLog("\nValid G Prox II ID Found!");
+ return 1;
+ }
+
+ PrintAndLog("\nNo Known Tags Found!\n");
+ if (testRaw=='u' || testRaw=='U'){
+ //test unknown tag formats (raw mode)
+ PrintAndLog("\nChecking for Unknown tags:\n");
+ ans=AutoCorrelate(4000, FALSE, FALSE);
+ if (ans > 0) PrintAndLog("Possible Auto Correlation of %d repeating samples",ans);
+ ans=GetFskClock("",FALSE,FALSE); //CmdDetectClockRate("F"); //
+ if (ans != 0){ //fsk
+ ans=FSKrawDemod("",FALSE);
+ if (ans>0) {
+ PrintAndLog("\nUnknown FSK Modulated Tag Found!");
+ printDemodBuff();
+ return 1;
+ }
+ }
+ ans=ASKmanDemod("",FALSE,FALSE);
+ if (ans>0) {
+ PrintAndLog("\nUnknown ASK Modulated and Manchester encoded Tag Found!");
+ PrintAndLog("\nif it does not look right it could instead be ASK/Biphase - try 'data rawdemod ab'");
+ printDemodBuff();
+ return 1;
+ }
+ ans=CmdPSK1rawDemod("");
+ if (ans>0) {
+ PrintAndLog("Possible unknown PSK1 Modulated Tag Found above!\n\nCould also be PSK2 - try 'data rawdemod p2'");
+ PrintAndLog("\nCould also be PSK3 - [currently not supported]");
+ PrintAndLog("\nCould also be NRZ - try 'data nrzrawdemod");
+ printDemodBuff();
+ return 1;
+ }
+ PrintAndLog("\nNo Data Found!\n");
+ }
+ return 0;
}
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1, "This help"},
- {"cmdread", CmdLFCommandRead, 0, "<off period> <'0' period> <'1' period> <command> ['h'] -- Modulate LF reader field to send command before read (all periods in microseconds) (option 'h' for 134)"},
- {"em4x", CmdLFEM4X, 1, "{ EM4X RFIDs... }"},
- {"config", CmdLFSetConfig, 0, "Set config for LF sampling, bit/sample, decimation, frequency"},
- {"flexdemod", CmdFlexdemod, 1, "Demodulate samples for FlexPass"},
- {"hid", CmdLFHID, 1, "{ HID RFIDs... }"},
- {"io", CmdLFIO, 1, "{ ioProx tags... }"},
- {"indalademod", CmdIndalaDemod, 1, "['224'] -- Demodulate samples for Indala 64 bit UID (option '224' for 224 bit)"},
- {"indalaclone", CmdIndalaClone, 0, "<UID> ['l']-- Clone Indala to T55x7 (tag must be in antenna)(UID in HEX)(option 'l' for 224 UID"},
- {"read", CmdLFRead, 0, "['s' silent] Read 125/134 kHz LF ID-only tag. Do 'lf read h' for help"},
- {"search", CmdLFfind, 1, "[offline] ['u'] Read and Search for valid known tag (in offline mode it you can load first then search) - 'u' to search for unknown tags"},
- {"sim", CmdLFSim, 0, "[GAP] -- Simulate LF tag from buffer with optional GAP (in microseconds)"},
- {"simask", CmdLFaskSim, 0, "[clock] [invert <1|0>] [manchester/raw <'m'|'r'>] [msg separator 's'] [d <hexdata>] -- Simulate LF ASK tag from demodbuffer or input"},
- {"simfsk", CmdLFfskSim, 0, "[c <clock>] [i] [H <fcHigh>] [L <fcLow>] [d <hexdata>] -- Simulate LF FSK tag from demodbuffer or input"},
- {"simpsk", CmdLFpskSim, 0, "[1|2|3] [c <clock>] [i] [r <carrier>] [d <raw hex to sim>] -- Simulate LF PSK tag from demodbuffer or input"},
- {"simbidir", CmdLFSimBidir, 0, "Simulate LF tag (with bidirectional data transmission between reader and tag)"},
- //{"simman", CmdLFSimManchester, 0, "<Clock> <Bitstream> [GAP] Simulate arbitrary Manchester LF tag"},
- {"snoop", CmdLFSnoop, 0, "['l'|'h'|<divisor>] [trigger threshold]-- Snoop LF (l:125khz, h:134khz)"},
- {"ti", CmdLFTI, 1, "{ TI RFIDs... }"},
- {"hitag", CmdLFHitag, 1, "{ Hitag tags and transponders... }"},
- {"vchdemod", CmdVchDemod, 1, "['clone'] -- Demodulate samples for VeriChip"},
- {"t55xx", CmdLFT55XX, 1, "{ T55xx RFIDs... }"},
- {"pcf7931", CmdLFPCF7931, 1, "{PCF7931 RFIDs...}"},
- {NULL, NULL, 0, NULL}
+ {"help", CmdHelp, 1, "This help"},
+ {"cmdread", CmdLFCommandRead, 0, "<off period> <'0' period> <'1' period> <command> ['h'] -- Modulate LF reader field to send command before read (all periods in microseconds) (option 'h' for 134)"},
+ {"em4x", CmdLFEM4X, 1, "{ EM4X RFIDs... }"},
+ {"config", CmdLFSetConfig, 0, "Set config for LF sampling, bit/sample, decimation, frequency"},
+ {"flexdemod", CmdFlexdemod, 1, "Demodulate samples for FlexPass"},
+ {"hid", CmdLFHID, 1, "{ HID RFIDs... }"},
+ {"io", CmdLFIO, 1, "{ ioProx tags... }"},
+ {"indalademod", CmdIndalaDemod, 1, "['224'] -- Demodulate samples for Indala 64 bit UID (option '224' for 224 bit)"},
+ {"indalaclone", CmdIndalaClone, 0, "<UID> ['l']-- Clone Indala to T55x7 (tag must be in antenna)(UID in HEX)(option 'l' for 224 UID"},
+ {"read", CmdLFRead, 0, "['s' silent] Read 125/134 kHz LF ID-only tag. Do 'lf read h' for help"},
+ {"search", CmdLFfind, 1, "[offline] ['u'] Read and Search for valid known tag (in offline mode it you can load first then search) - 'u' to search for unknown tags"},
+ {"sim", CmdLFSim, 0, "[GAP] -- Simulate LF tag from buffer with optional GAP (in microseconds)"},
+ {"simask", CmdLFaskSim, 0, "[clock] [invert <1|0>] [manchester/raw <'m'|'r'>] [msg separator 's'] [d <hexdata>] -- Simulate LF ASK tag from demodbuffer or input"},
+ {"simfsk", CmdLFfskSim, 0, "[c <clock>] [i] [H <fcHigh>] [L <fcLow>] [d <hexdata>] -- Simulate LF FSK tag from demodbuffer or input"},
+ {"simpsk", CmdLFpskSim, 0, "[1|2|3] [c <clock>] [i] [r <carrier>] [d <raw hex to sim>] -- Simulate LF PSK tag from demodbuffer or input"},
+ {"simbidir", CmdLFSimBidir, 0, "Simulate LF tag (with bidirectional data transmission between reader and tag)"},
+ //{"simman", CmdLFSimManchester, 0, "<Clock> <Bitstream> [GAP] Simulate arbitrary Manchester LF tag"},
+
{"snoop", CmdLFSnoop, 0, "['l'|'h'|<divisor>] [trigger threshold]-- Snoop LF (l:125khz, h:134khz)"},
+ {"ti", CmdLFTI, 1, "{ TI RFIDs... }"},
+ {"hitag", CmdLFHitag, 1, "{ Hitag tags and transponders... }"},
+ {"vchdemod", CmdVchDemod, 1, "['clone'] -- Demodulate samples for VeriChip"},
+ {"t55xx", CmdLFT55XX, 1, "{ T55xx RFIDs... }"},
+ {"pcf7931", CmdLFPCF7931, 1, "{PCF7931 RFIDs...}"},
+ {NULL, NULL, 0, NULL}
};
int CmdLF(const char *Cmd)
{
- CmdsParse(CommandTable, Cmd);
- return 0;
+ CmdsParse(CommandTable, Cmd);
+ return 0;
}
int CmdHelp(const char *Cmd)
{
- CmdsHelp(CommandTable);
- return 0;
+ CmdsHelp(CommandTable);
+ return 0;
}
//search for given preamble in given BitStream and return success=1 or fail=0 and startIndex and length
uint8_t preambleSearch(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t *size, size_t *startIdx)
{
- uint8_t foundCnt=0;
- for (int idx=0; idx < *size - pLen; idx++){
- if (memcmp(BitStream+idx, preamble, pLen) == 0){
- //first index found
- foundCnt++;
- if (foundCnt == 1){
- *startIdx = idx;
- }
- if (foundCnt == 2){
- *size = idx - *startIdx;
- return 1;
- }
- }
- }
- return 0;
+ uint8_t foundCnt=0;
+ for (int idx=0; idx < *size - pLen; idx++){
+ if (memcmp(BitStream+idx, preamble, pLen) == 0){
+ //first index found
+ foundCnt++;
+ if (foundCnt == 1){
+ *startIdx = idx;
+ }
+ if (foundCnt == 2){
+ *size = idx - *startIdx;
+ return 1;
+ }
+ }
+ }
+ return 0;
}
//by marshmellow
//takes 1s and 0s and searches for EM410x format - output EM ID
uint8_t Em410xDecode(uint8_t *BitStream, size_t *size, size_t *startIdx, uint32_t *hi, uint64_t *lo)
{
- //no arguments needed - built this way in case we want this to be a direct call from "data " cmds in the future
- // otherwise could be a void with no arguments
- //set defaults
- uint32_t i = 0;
- if (BitStream[1]>1){ //allow only 1s and 0s
- // PrintAndLog("no data found");
- return 0;
- }
- // 111111111 bit pattern represent start of frame
- // include 0 in front to help get start pos
- uint8_t preamble[] = {0,1,1,1,1,1,1,1,1,1};
- uint32_t idx = 0;
- uint32_t parityBits = 0;
- uint8_t errChk = 0;
- uint8_t FmtLen = 10;
- *startIdx = 0;
- errChk = preambleSearch(BitStream, preamble, sizeof(preamble), size, startIdx);
- if (errChk == 0 || *size < 64) return 0;
- if (*size > 64) FmtLen = 22;
- *startIdx += 1; //get rid of 0 from preamble
- idx = *startIdx + 9;
- for (i=0; i<FmtLen; i++){ //loop through 10 or 22 sets of 5 bits (50-10p = 40 bits or 88 bits)
- parityBits = bytebits_to_byte(BitStream+(i*5)+idx,5);
- //check even parity
- if (parityTest(parityBits, 5, 0) == 0){
- //parity failed quit
- return 0;
- }
- //set uint64 with ID from BitStream
- for (uint8_t ii=0; ii<4; ii++){
- *hi = (*hi << 1) | (*lo >> 63);
- *lo = (*lo << 1) | (BitStream[(i*5)+ii+idx]);
- }
- }
- if (errChk != 0) return 1;
- //skip last 5 bit parity test for simplicity.
- // *size = 64 | 128;
- return 0;
+ //no arguments needed - built this way in case we want this to be a direct call from "data " cmds in the future
+ // otherwise could be a void with no arguments
+ //set defaults
+ uint32_t i = 0;
+ if (BitStream[1]>1){ //allow only 1s and 0s
+ // PrintAndLog("no data found");
+ return 0;
+ }
+ // 111111111 bit pattern represent start of frame
+ // include 0 in front to help get start pos
+ uint8_t preamble[] = {0,1,1,1,1,1,1,1,1,1};
+ uint32_t idx = 0;
+ uint32_t parityBits = 0;
+ uint8_t errChk = 0;
+ uint8_t FmtLen = 10;
+ *startIdx = 0;
+ errChk = preambleSearch(BitStream, preamble, sizeof(preamble), size, startIdx);
+ if (errChk == 0 || *size < 64) return 0;
+ if (*size > 64) FmtLen = 22;
+ *startIdx += 1; //get rid of 0 from preamble
+ idx = *startIdx + 9;
+ for (i=0; i<FmtLen; i++){ //loop through 10 or 22 sets of 5 bits (50-10p = 40 bits or 88 bits)
+ parityBits = bytebits_to_byte(BitStream+(i*5)+idx,5);
+ //check even parity
+ if (parityTest(parityBits, 5, 0) == 0){
+ //parity failed quit
+ return 0;
+ }
+ //set uint64 with ID from BitStream
+ for (uint8_t ii=0; ii<4; ii++){
+ *hi = (*hi << 1) | (*lo >> 63);
+ *lo = (*lo << 1) | (BitStream[(i*5)+ii+idx]);
+ }
+ }
+ if (errChk != 0) return 1;
+ //skip last 5 bit parity test for simplicity.
+ // *size = 64 | 128;
+ return 0;
}
//by marshmellow
int lastBit = 0; //set first clock check
uint32_t bitnum = 0; //output counter
uint8_t tol = 0; //clock tolerance adjust - waves will be accepted as within the clock
- // if they fall + or - this value + clock from last valid wave
+ // if they fall + or - this value + clock from last valid wave
if (*clk == 32) tol=0; //clock tolerance may not be needed anymore currently set to
- // + or - 1 but could be increased for poor waves or removed entirely
+ // + or - 1 but could be increased for poor waves or removed entirely
uint32_t iii = 0;
uint32_t gLen = *size;
if (gLen > 500) gLen=500;
//translate 11111100000 to 10
size_t aggregate_bits(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t maxConsequtiveBits,
- uint8_t invert, uint8_t fchigh, uint8_t fclow)
+ uint8_t invert, uint8_t fchigh, uint8_t fclow)
{
uint8_t lastval=dest[0];
uint32_t idx=0;
// loop to get raw HID waveform then FSK demodulate the TAG ID from it
int HIDdemodFSK(uint8_t *dest, size_t *size, uint32_t *hi2, uint32_t *hi, uint32_t *lo)
{
- if (justNoise(dest, *size)) return -1;
-
- size_t numStart=0, size2=*size, startIdx=0;
- // FSK demodulator
- *size = fskdemod(dest, size2,50,1,10,8); //fsk2a
- if (*size < 96) return -2;
- // 00011101 bit pattern represent start of frame, 01 pattern represents a 0 and 10 represents a 1
- uint8_t preamble[] = {0,0,0,1,1,1,0,1};
- // find bitstring in array
- uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
- if (errChk == 0) return -3; //preamble not found
-
- numStart = startIdx + sizeof(preamble);
- // final loop, go over previously decoded FSK data and manchester decode into usable tag ID
- for (size_t idx = numStart; (idx-numStart) < *size - sizeof(preamble); idx+=2){
- if (dest[idx] == dest[idx+1]){
- return -4; //not manchester data
- }
- *hi2 = (*hi2<<1)|(*hi>>31);
- *hi = (*hi<<1)|(*lo>>31);
- //Then, shift in a 0 or one into low
- if (dest[idx] && !dest[idx+1]) // 1 0
- *lo=(*lo<<1)|1;
- else // 0 1
- *lo=(*lo<<1)|0;
- }
- return (int)startIdx;
+ if (justNoise(dest, *size)) return -1;
+
+ size_t numStart=0, size2=*size, startIdx=0;
+ // FSK demodulator
+ *size = fskdemod(dest, size2,50,1,10,8); //fsk2a
+ if (*size < 96) return -2;
+ // 00011101 bit pattern represent start of frame, 01 pattern represents a 0 and 10 represents a 1
+ uint8_t preamble[] = {0,0,0,1,1,1,0,1};
+ // find bitstring in array
+ uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
+ if (errChk == 0) return -3; //preamble not found
+
+ numStart = startIdx + sizeof(preamble);
+ // final loop, go over previously decoded FSK data and manchester decode into usable tag ID
+ for (size_t idx = numStart; (idx-numStart) < *size - sizeof(preamble); idx+=2){
+ if (dest[idx] == dest[idx+1]){
+ return -4; //not manchester data
+ }
+ *hi2 = (*hi2<<1)|(*hi>>31);
+ *hi = (*hi<<1)|(*lo>>31);
+ //Then, shift in a 0 or one into low
+ if (dest[idx] && !dest[idx+1]) // 1 0
+ *lo=(*lo<<1)|1;
+ else // 0 1
+ *lo=(*lo<<1)|0;
+ }
+ return (int)startIdx;
}
// loop to get raw paradox waveform then FSK demodulate the TAG ID from it
int DetectStrongAskClock(uint8_t dest[], size_t size)
{
int clk[]={0,8,16,32,40,50,64,100,128,256};
- size_t idx = 40;
+ size_t idx = 40;
uint8_t high=0;
size_t cnt = 0;
size_t highCnt = 0;
// return start index of best starting position for that clock and return clock (by reference)
int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr)
{
- int i=0;
- int clk[]={8,16,32,40,50,64,100,128,256};
- int loopCnt = 256; //don't need to loop through entire array...
- if (size == 0) return -1;
- if (size<loopCnt) loopCnt = size;
- //if we already have a valid clock quit
-
- for (;i<8;++i)
- if (clk[i] == *clock) return 0;
-
- //get high and low peak
- int peak, low;
- getHiLo(dest, loopCnt, &peak, &low, 75, 75);
-
- //test for large clean peaks
- if (DetectCleanAskWave(dest, size, peak, low)==1){
- int ans = DetectStrongAskClock(dest, size);
- for (i=7; i>0; i--){
- if (clk[i] == ans) {
- *clock=ans;
- return 0;
- }
- }
- }
- int ii;
- int clkCnt;
- int tol = 0;
- int bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
- int bestStart[]={0,0,0,0,0,0,0,0,0};
- int errCnt=0;
- //test each valid clock from smallest to greatest to see which lines up
- for(clkCnt=0; clkCnt < 8; clkCnt++){
- if (clk[clkCnt] == 32){
- tol=1;
- }else{
- tol=0;
- }
- if (!maxErr) loopCnt=clk[clkCnt]*2;
- bestErr[clkCnt]=1000;
- //try lining up the peaks by moving starting point (try first 256)
- for (ii=0; ii < loopCnt; ii++){
- if ((dest[ii] >= peak) || (dest[ii] <= low)){
- errCnt=0;
- // now that we have the first one lined up test rest of wave array
- for (i=0; i<((int)((size-ii-tol)/clk[clkCnt])-1); ++i){
- if (dest[ii+(i*clk[clkCnt])]>=peak || dest[ii+(i*clk[clkCnt])]<=low){
- }else if(dest[ii+(i*clk[clkCnt])-tol]>=peak || dest[ii+(i*clk[clkCnt])-tol]<=low){
- }else if(dest[ii+(i*clk[clkCnt])+tol]>=peak || dest[ii+(i*clk[clkCnt])+tol]<=low){
- }else{ //error no peak detected
- errCnt++;
- }
- }
- //if we found no errors then we can stop here
- // this is correct one - return this clock
- //PrintAndLog("DEBUG: clk %d, err %d, ii %d, i %d",clk[clkCnt],errCnt,ii,i);
- if(errCnt==0 && clkCnt<6) {
- *clock = clk[clkCnt];
- return ii;
- }
- //if we found errors see if it is lowest so far and save it as best run
- if(errCnt<bestErr[clkCnt]){
- bestErr[clkCnt]=errCnt;
- bestStart[clkCnt]=ii;
- }
- }
- }
- }
- uint8_t iii=0;
- uint8_t best=0;
- for (iii=0; iii<8; ++iii){
- if (bestErr[iii]<bestErr[best]){
- if (bestErr[iii]==0) bestErr[iii]=1;
- // current best bit to error ratio vs new bit to error ratio
- if (((size/clk[best])/bestErr[best] < (size/clk[iii])/bestErr[iii]) ){
- best = iii;
- }
- }
- }
- if (bestErr[best]>maxErr) return -1;
- *clock=clk[best];
- return bestStart[best];
+ int i=0;
+ int clk[]={8,16,32,40,50,64,100,128,256};
+ int loopCnt = 256; //don't need to loop through entire array...
+ if (size == 0) return -1;
+ if (size<loopCnt) loopCnt = size;
+ //if we already have a valid clock quit
+
+ for (;i<8;++i)
+ if (clk[i] == *clock) return 0;
+
+ //get high and low peak
+ int peak, low;
+ getHiLo(dest, loopCnt, &peak, &low, 75, 75);
+
+ //test for large clean peaks
+ if (DetectCleanAskWave(dest, size, peak, low)==1){
+ int ans = DetectStrongAskClock(dest, size);
+ for (i=7; i>0; i--){
+ if (clk[i] == ans) {
+ *clock=ans;
+ return 0;
+ }
+ }
+ }
+ int ii;
+ int clkCnt;
+ int tol = 0;
+ int bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
+ int bestStart[]={0,0,0,0,0,0,0,0,0};
+ int errCnt=0;
+ //test each valid clock from smallest to greatest to see which lines up
+ for(clkCnt=0; clkCnt < 8; clkCnt++){
+ if (clk[clkCnt] == 32){
+ tol=1;
+ }else{
+ tol=0;
+ }
+ if (!maxErr) loopCnt=clk[clkCnt]*2;
+ bestErr[clkCnt]=1000;
+ //try lining up the peaks by moving starting point (try first 256)
+ for (ii=0; ii < loopCnt; ii++){
+ if ((dest[ii] >= peak) || (dest[ii] <= low)){
+ errCnt=0;
+ // now that we have the first one lined up test rest of wave array
+ for (i=0; i<((int)((size-ii-tol)/clk[clkCnt])-1); ++i){
+ if (dest[ii+(i*clk[clkCnt])]>=peak || dest[ii+(i*clk[clkCnt])]<=low){
+ }else if(dest[ii+(i*clk[clkCnt])-tol]>=peak || dest[ii+(i*clk[clkCnt])-tol]<=low){
+ }else if(dest[ii+(i*clk[clkCnt])+tol]>=peak || dest[ii+(i*clk[clkCnt])+tol]<=low){
+ }else{ //error no peak detected
+ errCnt++;
+ }
+ }
+ //if we found no errors then we can stop here
+ // this is correct one - return this clock
+ //PrintAndLog("DEBUG: clk %d, err %d, ii %d, i %d",clk[clkCnt],errCnt,ii,i);
+ if(errCnt==0 && clkCnt<6) {
+ *clock = clk[clkCnt];
+ return ii;
+ }
+ //if we found errors see if it is lowest so far and save it as best run
+ if(errCnt<bestErr[clkCnt]){
+ bestErr[clkCnt]=errCnt;
+ bestStart[clkCnt]=ii;
+ }
+ }
+ }
+ }
+ uint8_t iii=0;
+ uint8_t best=0;
+ for (iii=0; iii<8; ++iii){
+ if (bestErr[iii]<bestErr[best]){
+ if (bestErr[iii]==0) bestErr[iii]=1;
+ // current best bit to error ratio vs new bit to error ratio
+ if (((size/clk[best])/bestErr[best] < (size/clk[iii])/bestErr[iii]) ){
+ best = iii;
+ }
+ }
+ }
+ if (bestErr[best]>maxErr) return -1;
+ *clock=clk[best];
+ return bestStart[best];
}
//by marshmellow
// a phase shift is determined by measuring the sample length of each wave
int DetectPSKClock(uint8_t dest[], size_t size, int clock)
{
- uint8_t clk[]={255,16,32,40,50,64,100,128,255}; //255 is not a valid clock
- uint16_t loopCnt = 4096; //don't need to loop through entire array...
- if (size == 0) return 0;
- if (size<loopCnt) loopCnt = size;
-
- //if we already have a valid clock quit
- size_t i=1;
- for (; i < 8; ++i)
- if (clk[i] == clock) return clock;
-
- size_t waveStart=0, waveEnd=0, firstFullWave=0, lastClkBit=0;
- uint8_t clkCnt, fc=0, fullWaveLen=0, tol=1;
- uint16_t peakcnt=0, errCnt=0, waveLenCnt=0;
- uint16_t bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
- uint16_t peaksdet[]={0,0,0,0,0,0,0,0,0};
- countFC(dest, size, &fc);
- //PrintAndLog("DEBUG: FC: %d",fc);
-
- //find first full wave
- for (i=0; i<loopCnt; i++){
- if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
- if (waveStart == 0) {
- waveStart = i+1;
- //PrintAndLog("DEBUG: waveStart: %d",waveStart);
- } else {
- waveEnd = i+1;
- //PrintAndLog("DEBUG: waveEnd: %d",waveEnd);
- waveLenCnt = waveEnd-waveStart;
- if (waveLenCnt > fc){
- firstFullWave = waveStart;
- fullWaveLen=waveLenCnt;
- break;
- }
- waveStart=0;
- }
- }
- }
- //PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
-
- //test each valid clock from greatest to smallest to see which lines up
- for(clkCnt=7; clkCnt >= 1 ; clkCnt--){
- lastClkBit = firstFullWave; //set end of wave as clock align
- waveStart = 0;
- errCnt=0;
- peakcnt=0;
- //PrintAndLog("DEBUG: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit);
-
- for (i = firstFullWave+fullWaveLen-1; i < loopCnt-2; i++){
- //top edge of wave = start of new wave
- if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
- if (waveStart == 0) {
- waveStart = i+1;
- waveLenCnt=0;
- } else { //waveEnd
- waveEnd = i+1;
- waveLenCnt = waveEnd-waveStart;
- if (waveLenCnt > fc){
- //if this wave is a phase shift
- //PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, ii: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,ii+1,fc);
- if (i+1 >= lastClkBit + clk[clkCnt] - tol){ //should be a clock bit
- peakcnt++;
- lastClkBit+=clk[clkCnt];
- } else if (i<lastClkBit+8){
- //noise after a phase shift - ignore
- } else { //phase shift before supposed to based on clock
- errCnt++;
- }
- } else if (i+1 > lastClkBit + clk[clkCnt] + tol + fc){
- lastClkBit+=clk[clkCnt]; //no phase shift but clock bit
- }
- waveStart=i+1;
- }
- }
- }
- if (errCnt == 0){
- return clk[clkCnt];
- }
- if (errCnt <= bestErr[clkCnt]) bestErr[clkCnt]=errCnt;
- if (peakcnt > peaksdet[clkCnt]) peaksdet[clkCnt]=peakcnt;
- }
- //all tested with errors
- //return the highest clk with the most peaks found
- uint8_t best=7;
- for (i=7; i>=1; i--){
- if (peaksdet[i] > peaksdet[best]) {
- best = i;
- }
- //PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]);
- }
- return clk[best];
+ uint8_t clk[]={255,16,32,40,50,64,100,128,255}; //255 is not a valid clock
+ uint16_t loopCnt = 4096; //don't need to loop through entire array...
+ if (size == 0) return 0;
+ if (size<loopCnt) loopCnt = size;
+
+ //if we already have a valid clock quit
+ size_t i=1;
+ for (; i < 8; ++i)
+ if (clk[i] == clock) return clock;
+
+ size_t waveStart=0, waveEnd=0, firstFullWave=0, lastClkBit=0;
+ uint8_t clkCnt, fc=0, fullWaveLen=0, tol=1;
+ uint16_t peakcnt=0, errCnt=0, waveLenCnt=0;
+ uint16_t bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
+ uint16_t peaksdet[]={0,0,0,0,0,0,0,0,0};
+ countFC(dest, size, &fc);
+ //PrintAndLog("DEBUG: FC: %d",fc);
+
+ //find first full wave
+ for (i=0; i<loopCnt; i++){
+ if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
+ if (waveStart == 0) {
+ waveStart = i+1;
+ //PrintAndLog("DEBUG: waveStart: %d",waveStart);
+ } else {
+ waveEnd = i+1;
+ //PrintAndLog("DEBUG: waveEnd: %d",waveEnd);
+ waveLenCnt = waveEnd-waveStart;
+ if (waveLenCnt > fc){
+ firstFullWave = waveStart;
+ fullWaveLen=waveLenCnt;
+ break;
+ }
+ waveStart=0;
+ }
+ }
+ }
+ //PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
+
+ //test each valid clock from greatest to smallest to see which lines up
+ for(clkCnt=7; clkCnt >= 1 ; clkCnt--){
+ lastClkBit = firstFullWave; //set end of wave as clock align
+ waveStart = 0;
+ errCnt=0;
+ peakcnt=0;
+ //PrintAndLog("DEBUG: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit);
+
+ for (i = firstFullWave+fullWaveLen-1; i < loopCnt-2; i++){
+ //top edge of wave = start of new wave
+ if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
+ if (waveStart == 0) {
+ waveStart = i+1;
+ waveLenCnt=0;
+ } else { //waveEnd
+ waveEnd = i+1;
+ waveLenCnt = waveEnd-waveStart;
+ if (waveLenCnt > fc){
+ //if this wave is a phase shift
+ //PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, ii: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,ii+1,fc);
+ if (i+1 >= lastClkBit + clk[clkCnt] - tol){ //should be a clock bit
+ peakcnt++;
+ lastClkBit+=clk[clkCnt];
+ } else if (i<lastClkBit+8){
+ //noise after a phase shift - ignore
+ } else { //phase shift before supposed to based on clock
+ errCnt++;
+ }
+ } else if (i+1 > lastClkBit + clk[clkCnt] + tol + fc){
+ lastClkBit+=clk[clkCnt]; //no phase shift but clock bit
+ }
+ waveStart=i+1;
+ }
+ }
+ }
+ if (errCnt == 0){
+ return clk[clkCnt];
+ }
+ if (errCnt <= bestErr[clkCnt]) bestErr[clkCnt]=errCnt;
+ if (peakcnt > peaksdet[clkCnt]) peaksdet[clkCnt]=peakcnt;
+ }
+ //all tested with errors
+ //return the highest clk with the most peaks found
+ uint8_t best=7;
+ for (i=7; i>=1; i--){
+ if (peaksdet[i] > peaksdet[best]) {
+ best = i;
+ }
+ //PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]);
+ }
+ return clk[best];
}
//by marshmellow
//detect nrz clock by reading #peaks vs no peaks(or errors)
int DetectNRZClock(uint8_t dest[], size_t size, int clock)
{
- int i=0;
- int clk[]={8,16,32,40,50,64,100,128,256};
- int loopCnt = 4096; //don't need to loop through entire array...
- if (size == 0) return 0;
- if (size<loopCnt) loopCnt = size;
-
- //if we already have a valid clock quit
- for (; i < 8; ++i)
- if (clk[i] == clock) return clock;
-
- //get high and low peak
- int peak, low;
- getHiLo(dest, loopCnt, &peak, &low, 75, 75);
-
- //PrintAndLog("DEBUG: peak: %d, low: %d",peak,low);
- int ii;
- uint8_t clkCnt;
- uint8_t tol = 0;
- int peakcnt=0;
- int peaksdet[]={0,0,0,0,0,0,0,0};
- int maxPeak=0;
- //test for large clipped waves
- for (i=0; i<loopCnt; i++){
- if (dest[i] >= peak || dest[i] <= low){
- peakcnt++;
- } else {
- if (peakcnt>0 && maxPeak < peakcnt){
- maxPeak = peakcnt;
- }
- peakcnt=0;
- }
- }
- peakcnt=0;
- //test each valid clock from smallest to greatest to see which lines up
- for(clkCnt=0; clkCnt < 8; ++clkCnt){
- //ignore clocks smaller than largest peak
- if (clk[clkCnt]<maxPeak) continue;
-
- //try lining up the peaks by moving starting point (try first 256)
- for (ii=0; ii< loopCnt; ++ii){
- if ((dest[ii] >= peak) || (dest[ii] <= low)){
- peakcnt=0;
- // now that we have the first one lined up test rest of wave array
- for (i=0; i < ((int)((size-ii-tol)/clk[clkCnt])-1); ++i){
- if (dest[ii+(i*clk[clkCnt])]>=peak || dest[ii+(i*clk[clkCnt])]<=low){
- peakcnt++;
- }
- }
- if(peakcnt>peaksdet[clkCnt]) {
- peaksdet[clkCnt]=peakcnt;
- }
- }
- }
- }
- int iii=7;
- int best=0;
- for (iii=7; iii > 0; iii--){
- if (peaksdet[iii] > peaksdet[best]){
- best = iii;
- }
- //PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]);
- }
- return clk[best];
+ int i=0;
+ int clk[]={8,16,32,40,50,64,100,128,256};
+ int loopCnt = 4096; //don't need to loop through entire array...
+ if (size == 0) return 0;
+ if (size<loopCnt) loopCnt = size;
+
+ //if we already have a valid clock quit
+ for (; i < 8; ++i)
+ if (clk[i] == clock) return clock;
+
+ //get high and low peak
+ int peak, low;
+ getHiLo(dest, loopCnt, &peak, &low, 75, 75);
+
+ //PrintAndLog("DEBUG: peak: %d, low: %d",peak,low);
+ int ii;
+ uint8_t clkCnt;
+ uint8_t tol = 0;
+ int peakcnt=0;
+ int peaksdet[]={0,0,0,0,0,0,0,0};
+ int maxPeak=0;
+ //test for large clipped waves
+ for (i=0; i<loopCnt; i++){
+ if (dest[i] >= peak || dest[i] <= low){
+ peakcnt++;
+ } else {
+ if (peakcnt>0 && maxPeak < peakcnt){
+ maxPeak = peakcnt;
+ }
+ peakcnt=0;
+ }
+ }
+ peakcnt=0;
+ //test each valid clock from smallest to greatest to see which lines up
+ for(clkCnt=0; clkCnt < 8; ++clkCnt){
+ //ignore clocks smaller than largest peak
+ if (clk[clkCnt]<maxPeak) continue;
+
+ //try lining up the peaks by moving starting point (try first 256)
+ for (ii=0; ii< loopCnt; ++ii){
+ if ((dest[ii] >= peak) || (dest[ii] <= low)){
+ peakcnt=0;
+ // now that we have the first one lined up test rest of wave array
+ for (i=0; i < ((int)((size-ii-tol)/clk[clkCnt])-1); ++i){
+ if (dest[ii+(i*clk[clkCnt])]>=peak || dest[ii+(i*clk[clkCnt])]<=low){
+ peakcnt++;
+ }
+ }
+ if(peakcnt>peaksdet[clkCnt]) {
+ peaksdet[clkCnt]=peakcnt;
+ }
+ }
+ }
+ }
+ int iii=7;
+ int best=0;
+ for (iii=7; iii > 0; iii--){
+ if (peaksdet[iii] > peaksdet[best]){
+ best = iii;
+ }
+ //PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]);
+ }
+ return clk[best];
}
// by marshmellow
// there probably is a much simpler way to do this....
int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert, int maxErr)
{
- if (justNoise(dest, *size)) return -1;
- *clk = DetectNRZClock(dest, *size, *clk);
- if (*clk==0) return -2;
- uint32_t i;
- uint32_t gLen = 4096;
- if (gLen>*size) gLen = *size;
- int high, low;
- if (getHiLo(dest, gLen, &high, &low, 75, 75) < 1) return -3; //25% fuzz on high 25% fuzz on low
- int lastBit = 0; //set first clock check
- uint32_t bitnum = 0; //output counter
- uint8_t tol = 1; //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
- uint32_t iii = 0;
- uint16_t errCnt =0;
- uint16_t MaxBits = 1000;
- uint32_t bestErrCnt = maxErr+1;
- uint32_t bestPeakCnt = 0;
- uint32_t bestPeakStart=0;
- uint8_t bestFirstPeakHigh=0;
- uint8_t firstPeakHigh=0;
- uint8_t curBit=0;
- uint8_t bitHigh=0;
- uint8_t errBitHigh=0;
- uint16_t peakCnt=0;
- uint8_t ignoreWindow=4;
- uint8_t ignoreCnt=ignoreWindow; //in case of noice near peak
- //loop to find first wave that works - align to clock
- for (iii=0; iii < gLen; ++iii){
- if ((dest[iii]>=high) || (dest[iii]<=low)){
- if (dest[iii]>=high) firstPeakHigh=1;
- else firstPeakHigh=0;
- lastBit=iii-*clk;
- peakCnt=0;
- errCnt=0;
- bitnum=0;
- //loop through to see if this start location works
- for (i = iii; i < *size; ++i) {
- //if we found a high bar and we are at a clock bit
- if ((dest[i]>=high ) && (i>=lastBit+*clk-tol && i<=lastBit+*clk+tol)){
- bitHigh=1;
- lastBit+=*clk;
- bitnum++;
- peakCnt++;
- errBitHigh=0;
- ignoreCnt=ignoreWindow;
- //else if low bar found and we are at a clock point
- }else if ((dest[i]<=low ) && (i>=lastBit+*clk-tol && i<=lastBit+*clk+tol)){
- bitHigh=1;
- lastBit+=*clk;
- bitnum++;
- peakCnt++;
- errBitHigh=0;
- ignoreCnt=ignoreWindow;
- //else if no bars found
- }else if(dest[i] < high && dest[i] > low) {
- if (ignoreCnt==0){
- bitHigh=0;
- if (errBitHigh==1){
- errCnt++;
- }
- errBitHigh=0;
- } else {
- ignoreCnt--;
- }
- //if we are past a clock point
- if (i >= lastBit+*clk+tol){ //clock val
- lastBit+=*clk;
- bitnum++;
- }
- //else if bar found but we are not at a clock bit and we did not just have a clock bit
- }else if ((dest[i]>=high || dest[i]<=low) && (i<lastBit+*clk-tol || i>lastBit+*clk+tol) && (bitHigh==0)){
- //error bar found no clock...
- errBitHigh=1;
- }
- if (bitnum>=MaxBits) break;
- }
- //we got more than 64 good bits and not all errors
- if (bitnum > (64) && (errCnt <= (maxErr))) {
- //possible good read
- if (errCnt == 0){
- //bestStart = iii;
- bestFirstPeakHigh=firstPeakHigh;
- bestErrCnt = errCnt;
- bestPeakCnt = peakCnt;
- bestPeakStart = iii;
- break; //great read - finish
- }
- if (errCnt < bestErrCnt){ //set this as new best run
- bestErrCnt = errCnt;
- //bestStart = iii;
- }
- if (peakCnt > bestPeakCnt){
- bestFirstPeakHigh=firstPeakHigh;
- bestPeakCnt=peakCnt;
- bestPeakStart=iii;
- }
- }
- }
- }
- //PrintAndLog("DEBUG: bestErrCnt: %d, maxErr: %d, bestStart: %d, bestPeakCnt: %d, bestPeakStart: %d",bestErrCnt,maxErr,bestStart,bestPeakCnt,bestPeakStart);
- if (bestErrCnt <= maxErr){
- //best run is good enough set to best run and set overwrite BinStream
- iii=bestPeakStart;
- lastBit=bestPeakStart-*clk;
- bitnum=0;
- memset(dest, bestFirstPeakHigh^1, bestPeakStart / *clk);
- bitnum += (bestPeakStart / *clk);
- for (i = iii; i < *size; ++i) {
- //if we found a high bar and we are at a clock bit
- if ((dest[i] >= high ) && (i>=lastBit+*clk-tol && i<=lastBit+*clk+tol)){
- bitHigh=1;
- lastBit+=*clk;
- curBit=1-*invert;
- dest[bitnum]=curBit;
- bitnum++;
- errBitHigh=0;
- ignoreCnt=ignoreWindow;
- //else if low bar found and we are at a clock point
- }else if ((dest[i]<=low ) && (i>=lastBit+*clk-tol && i<=lastBit+*clk+tol)){
- bitHigh=1;
- lastBit+=*clk;
- curBit=*invert;
- dest[bitnum]=curBit;
- bitnum++;
- errBitHigh=0;
- ignoreCnt=ignoreWindow;
- //else if no bars found
- }else if(dest[i]<high && dest[i]>low) {
- if (ignoreCnt==0){
- bitHigh=0;
- //if peak is done was it an error peak?
- if (errBitHigh==1){
- dest[bitnum]=77;
- bitnum++;
- errCnt++;
- }
- errBitHigh=0;
- } else {
- ignoreCnt--;
- }
- //if we are past a clock point
- if (i>=lastBit+*clk+tol){ //clock val
- lastBit+=*clk;
- dest[bitnum]=curBit;
- bitnum++;
- }
- //else if bar found but we are not at a clock bit and we did not just have a clock bit
- }else if ((dest[i]>=high || dest[i]<=low) && ((i<lastBit+*clk-tol) || (i>lastBit+*clk+tol)) && (bitHigh==0)){
- //error bar found no clock...
- errBitHigh=1;
- }
- if (bitnum >= MaxBits) break;
- }
- *size=bitnum;
- } else{
- *size=bitnum;
- return bestErrCnt;
- }
-
- if (bitnum>16){
- *size=bitnum;
- } else return -5;
- return errCnt;
+ if (justNoise(dest, *size)) return -1;
+ *clk = DetectNRZClock(dest, *size, *clk);
+ if (*clk==0) return -2;
+ uint32_t i;
+ uint32_t gLen = 4096;
+ if (gLen>*size) gLen = *size;
+ int high, low;
+ if (getHiLo(dest, gLen, &high, &low, 75, 75) < 1) return -3; //25% fuzz on high 25% fuzz on low
+ int lastBit = 0; //set first clock check
+ uint32_t bitnum = 0; //output counter
+ uint8_t tol = 1; //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
+ uint32_t iii = 0;
+ uint16_t errCnt =0;
+ uint16_t MaxBits = 1000;
+ uint32_t bestErrCnt = maxErr+1;
+ uint32_t bestPeakCnt = 0;
+ uint32_t bestPeakStart=0;
+ uint8_t bestFirstPeakHigh=0;
+ uint8_t firstPeakHigh=0;
+ uint8_t curBit=0;
+ uint8_t bitHigh=0;
+ uint8_t errBitHigh=0;
+ uint16_t peakCnt=0;
+ uint8_t ignoreWindow=4;
+ uint8_t ignoreCnt=ignoreWindow; //in case of noice near peak
+ //loop to find first wave that works - align to clock
+ for (iii=0; iii < gLen; ++iii){
+ if ((dest[iii]>=high) || (dest[iii]<=low)){
+ if (dest[iii]>=high) firstPeakHigh=1;
+ else firstPeakHigh=0;
+ lastBit=iii-*clk;
+ peakCnt=0;
+ errCnt=0;
+ bitnum=0;
+ //loop through to see if this start location works
+ for (i = iii; i < *size; ++i) {
+ //if we found a high bar and we are at a clock bit
+ if ((dest[i]>=high ) && (i>=lastBit+*clk-tol && i<=lastBit+*clk+tol)){
+ bitHigh=1;
+ lastBit+=*clk;
+ bitnum++;
+ peakCnt++;
+ errBitHigh=0;
+ ignoreCnt=ignoreWindow;
+ //else if low bar found and we are at a clock point
+ }else if ((dest[i]<=low ) && (i>=lastBit+*clk-tol && i<=lastBit+*clk+tol)){
+ bitHigh=1;
+ lastBit+=*clk;
+ bitnum++;
+ peakCnt++;
+ errBitHigh=0;
+ ignoreCnt=ignoreWindow;
+ //else if no bars found
+ }else if(dest[i] < high && dest[i] > low) {
+ if (ignoreCnt==0){
+ bitHigh=0;
+ if (errBitHigh==1){
+ errCnt++;
+ }
+ errBitHigh=0;
+ } else {
+ ignoreCnt--;
+ }
+ //if we are past a clock point
+ if (i >= lastBit+*clk+tol){ //clock val
+ lastBit+=*clk;
+ bitnum++;
+ }
+ //else if bar found but we are not at a clock bit and we did not just have a clock bit
+ }else if ((dest[i]>=high || dest[i]<=low) && (i<lastBit+*clk-tol || i>lastBit+*clk+tol) && (bitHigh==0)){
+ //error bar found no clock...
+ errBitHigh=1;
+ }
+ if (bitnum>=MaxBits) break;
+ }
+ //we got more than 64 good bits and not all errors
+ if (bitnum > (64) && (errCnt <= (maxErr))) {
+ //possible good read
+ if (errCnt == 0){
+ //bestStart = iii;
+ bestFirstPeakHigh=firstPeakHigh;
+ bestErrCnt = errCnt;
+ bestPeakCnt = peakCnt;
+ bestPeakStart = iii;
+ break; //great read - finish
+ }
+ if (errCnt < bestErrCnt){ //set this as new best run
+ bestErrCnt = errCnt;
+ //bestStart = iii;
+ }
+ if (peakCnt > bestPeakCnt){
+ bestFirstPeakHigh=firstPeakHigh;
+ bestPeakCnt=peakCnt;
+ bestPeakStart=iii;
+ }
+ }
+ }
+ }
+ //PrintAndLog("DEBUG: bestErrCnt: %d, maxErr: %d, bestStart: %d, bestPeakCnt: %d, bestPeakStart: %d",bestErrCnt,maxErr,bestStart,bestPeakCnt,bestPeakStart);
+ if (bestErrCnt <= maxErr){
+ //best run is good enough set to best run and set overwrite BinStream
+ iii=bestPeakStart;
+ lastBit=bestPeakStart-*clk;
+ bitnum=0;
+ memset(dest, bestFirstPeakHigh^1, bestPeakStart / *clk);
+ bitnum += (bestPeakStart / *clk);
+ for (i = iii; i < *size; ++i) {
+ //if we found a high bar and we are at a clock bit
+ if ((dest[i] >= high ) && (i>=lastBit+*clk-tol && i<=lastBit+*clk+tol)){
+ bitHigh=1;
+ lastBit+=*clk;
+ curBit=1-*invert;
+ dest[bitnum]=curBit;
+ bitnum++;
+ errBitHigh=0;
+ ignoreCnt=ignoreWindow;
+ //else if low bar found and we are at a clock point
+ }else if ((dest[i]<=low ) && (i>=lastBit+*clk-tol && i<=lastBit+*clk+tol)){
+ bitHigh=1;
+ lastBit+=*clk;
+ curBit=*invert;
+ dest[bitnum]=curBit;
+ bitnum++;
+ errBitHigh=0;
+ ignoreCnt=ignoreWindow;
+ //else if no bars found
+ }else if(dest[i]<high && dest[i]>low) {
+ if (ignoreCnt==0){
+ bitHigh=0;
+ //if peak is done was it an error peak?
+ if (errBitHigh==1){
+ dest[bitnum]=77;
+ bitnum++;
+ errCnt++;
+ }
+ errBitHigh=0;
+ } else {
+ ignoreCnt--;
+ }
+ //if we are past a clock point
+ if (i>=lastBit+*clk+tol){ //clock val
+ lastBit+=*clk;
+ dest[bitnum]=curBit;
+ bitnum++;
+ }
+ //else if bar found but we are not at a clock bit and we did not just have a clock bit
+ }else if ((dest[i]>=high || dest[i]<=low) && ((i<lastBit+*clk-tol) || (i>lastBit+*clk+tol)) && (bitHigh==0)){
+ //error bar found no clock...
+ errBitHigh=1;
+ }
+ if (bitnum >= MaxBits) break;
+ }
+ *size=bitnum;
+ } else{
+ *size=bitnum;
+ return bestErrCnt;
+ }
+
+ if (bitnum>16){
+ *size=bitnum;
+ } else return -5;
+ return errCnt;
}
//by marshmellow
//detects the bit clock for FSK given the high and low Field Clocks
uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fcLow)
{
- uint8_t clk[] = {8,16,32,40,50,64,100,128,0};
- uint16_t rfLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
- uint8_t rfCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
- uint8_t rfLensFnd = 0;
- uint8_t lastFCcnt=0;
- uint32_t fcCounter = 0;
- uint16_t rfCounter = 0;
- uint8_t firstBitFnd = 0;
- size_t i;
- if (size == 0) return 0;
-
- uint8_t fcTol = (uint8_t)(0.5+(float)(fcHigh-fcLow)/2);
- rfLensFnd=0;
- fcCounter=0;
- rfCounter=0;
- firstBitFnd=0;
- //PrintAndLog("DEBUG: fcTol: %d",fcTol);
- // prime i to first up transition
- for (i = 1; i < size-1; i++)
- if (BitStream[i] > BitStream[i-1] && BitStream[i]>=BitStream[i+1])
- break;
-
- for (; i < size-1; i++){
- if (BitStream[i] > BitStream[i-1] && BitStream[i]>=BitStream[i+1]){
- // new peak
- fcCounter++;
- rfCounter++;
- // if we got less than the small fc + tolerance then set it to the small fc
- if (fcCounter < fcLow+fcTol)
- fcCounter = fcLow;
- else //set it to the large fc
- fcCounter = fcHigh;
-
- //look for bit clock (rf/xx)
- if ((fcCounter<lastFCcnt || fcCounter>lastFCcnt)){
- //not the same size as the last wave - start of new bit sequence
-
- if (firstBitFnd>1){ //skip first wave change - probably not a complete bit
- for (int ii=0; ii<15; ii++){
- if (rfLens[ii]==rfCounter){
- rfCnts[ii]++;
- rfCounter=0;
- break;
- }
- }
- if (rfCounter>0 && rfLensFnd<15){
- //PrintAndLog("DEBUG: rfCntr %d, fcCntr %d",rfCounter,fcCounter);
- rfCnts[rfLensFnd]++;
- rfLens[rfLensFnd++]=rfCounter;
- }
- } else {
- firstBitFnd++;
- }
- rfCounter=0;
- lastFCcnt=fcCounter;
- }
- fcCounter=0;
- } else {
- // count sample
- fcCounter++;
- rfCounter++;
- }
- }
- uint8_t rfHighest=15, rfHighest2=15, rfHighest3=15;
-
- for (i=0; i<15; i++){
- //PrintAndLog("DEBUG: RF %d, cnts %d",rfLens[i], rfCnts[i]);
- //get highest 2 RF values (might need to get more values to compare or compare all?)
- if (rfCnts[i]>rfCnts[rfHighest]){
- rfHighest3=rfHighest2;
- rfHighest2=rfHighest;
- rfHighest=i;
- } else if(rfCnts[i]>rfCnts[rfHighest2]){
- rfHighest3=rfHighest2;
- rfHighest2=i;
- } else if(rfCnts[i]>rfCnts[rfHighest3]){
- rfHighest3=i;
- }
- }
- // set allowed clock remainder tolerance to be 1 large field clock length+1
- // we could have mistakenly made a 9 a 10 instead of an 8 or visa versa so rfLens could be 1 FC off
- uint8_t tol1 = fcHigh+1;
-
- //PrintAndLog("DEBUG: hightest: 1 %d, 2 %d, 3 %d",rfLens[rfHighest],rfLens[rfHighest2],rfLens[rfHighest3]);
-
- // loop to find the highest clock that has a remainder less than the tolerance
- // compare samples counted divided by
- int ii=7;
- for (; ii>=0; ii--){
- if (rfLens[rfHighest] % clk[ii] < tol1 || rfLens[rfHighest] % clk[ii] > clk[ii]-tol1){
- if (rfLens[rfHighest2] % clk[ii] < tol1 || rfLens[rfHighest2] % clk[ii] > clk[ii]-tol1){
- if (rfLens[rfHighest3] % clk[ii] < tol1 || rfLens[rfHighest3] % clk[ii] > clk[ii]-tol1){
- break;
- }
- }
- }
- }
-
- if (ii<0) return 0; // oops we went too far
-
- return clk[ii];
+ uint8_t clk[] = {8,16,32,40,50,64,100,128,0};
+ uint16_t rfLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+ uint8_t rfCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+ uint8_t rfLensFnd = 0;
+ uint8_t lastFCcnt=0;
+ uint32_t fcCounter = 0;
+ uint16_t rfCounter = 0;
+ uint8_t firstBitFnd = 0;
+ size_t i;
+ if (size == 0) return 0;
+
+ uint8_t fcTol = (uint8_t)(0.5+(float)(fcHigh-fcLow)/2);
+ rfLensFnd=0;
+ fcCounter=0;
+ rfCounter=0;
+ firstBitFnd=0;
+ //PrintAndLog("DEBUG: fcTol: %d",fcTol);
+ // prime i to first up transition
+ for (i = 1; i < size-1; i++)
+ if (BitStream[i] > BitStream[i-1] && BitStream[i]>=BitStream[i+1])
+ break;
+
+ for (; i < size-1; i++){
+ if (BitStream[i] > BitStream[i-1] && BitStream[i]>=BitStream[i+1]){
+ // new peak
+ fcCounter++;
+ rfCounter++;
+ // if we got less than the small fc + tolerance then set it to the small fc
+ if (fcCounter < fcLow+fcTol)
+ fcCounter = fcLow;
+ else //set it to the large fc
+ fcCounter = fcHigh;
+
+ //look for bit clock (rf/xx)
+ if ((fcCounter<lastFCcnt || fcCounter>lastFCcnt)){
+ //not the same size as the last wave - start of new bit sequence
+
+ if (firstBitFnd>1){ //skip first wave change - probably not a complete bit
+ for (int ii=0; ii<15; ii++){
+ if (rfLens[ii]==rfCounter){
+ rfCnts[ii]++;
+ rfCounter=0;
+ break;
+ }
+ }
+ if (rfCounter>0 && rfLensFnd<15){
+ //PrintAndLog("DEBUG: rfCntr %d, fcCntr %d",rfCounter,fcCounter);
+ rfCnts[rfLensFnd]++;
+ rfLens[rfLensFnd++]=rfCounter;
+ }
+ } else {
+ firstBitFnd++;
+ }
+ rfCounter=0;
+ lastFCcnt=fcCounter;
+ }
+ fcCounter=0;
+ } else {
+ // count sample
+ fcCounter++;
+ rfCounter++;
+ }
+ }
+ uint8_t rfHighest=15, rfHighest2=15, rfHighest3=15;
+
+ for (i=0; i<15; i++){
+ //PrintAndLog("DEBUG: RF %d, cnts %d",rfLens[i], rfCnts[i]);
+ //get highest 2 RF values (might need to get more values to compare or compare all?)
+ if (rfCnts[i]>rfCnts[rfHighest]){
+ rfHighest3=rfHighest2;
+ rfHighest2=rfHighest;
+ rfHighest=i;
+ } else if(rfCnts[i]>rfCnts[rfHighest2]){
+ rfHighest3=rfHighest2;
+ rfHighest2=i;
+ } else if(rfCnts[i]>rfCnts[rfHighest3]){
+ rfHighest3=i;
+ }
+ }
+ // set allowed clock remainder tolerance to be 1 large field clock length+1
+ // we could have mistakenly made a 9 a 10 instead of an 8 or visa versa so rfLens could be 1 FC off
+ uint8_t tol1 = fcHigh+1;
+
+ //PrintAndLog("DEBUG: hightest: 1 %d, 2 %d, 3 %d",rfLens[rfHighest],rfLens[rfHighest2],rfLens[rfHighest3]);
+
+ // loop to find the highest clock that has a remainder less than the tolerance
+ // compare samples counted divided by
+ int ii=7;
+ for (; ii>=0; ii--){
+ if (rfLens[rfHighest] % clk[ii] < tol1 || rfLens[rfHighest] % clk[ii] > clk[ii]-tol1){
+ if (rfLens[rfHighest2] % clk[ii] < tol1 || rfLens[rfHighest2] % clk[ii] > clk[ii]-tol1){
+ if (rfLens[rfHighest3] % clk[ii] < tol1 || rfLens[rfHighest3] % clk[ii] > clk[ii]-tol1){
+ break;
+ }
+ }
+ }
+ }
+
+ if (ii<0) return 0; // oops we went too far
+
+ return clk[ii];
}
//by marshmellow
//mainly used for FSK field clock detection
uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t *mostFC)
{
- uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0};
- uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0};
- uint8_t fcLensFnd = 0;
- uint8_t lastFCcnt=0;
- uint32_t fcCounter = 0;
- size_t i;
- if (size == 0) return 0;
-
- // prime i to first up transition
- for (i = 1; i < size-1; i++)
- if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1])
- break;
-
- for (; i < size-1; i++){
- if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1]){
- // new up transition
- fcCounter++;
-
- //if we had 5 and now have 9 then go back to 8 (for when we get a fc 9 instead of an 8)
- if (lastFCcnt==5 && fcCounter==9) fcCounter--;
- //if odd and not rc/5 add one (for when we get a fc 9 instead of 10)
- if ((fcCounter==9 && fcCounter & 1) || fcCounter==4) fcCounter++;
-
- // save last field clock count (fc/xx)
- // find which fcLens to save it to:
- for (int ii=0; ii<10; ii++){
- if (fcLens[ii]==fcCounter){
- fcCnts[ii]++;
- fcCounter=0;
- break;
- }
- }
- if (fcCounter>0 && fcLensFnd<10){
- //add new fc length
- fcCnts[fcLensFnd]++;
- fcLens[fcLensFnd++]=fcCounter;
- }
- fcCounter=0;
- } else {
- // count sample
- fcCounter++;
- }
- }
-
- uint8_t best1=9, best2=9, best3=9;
- uint16_t maxCnt1=0;
- // go through fclens and find which ones are bigest 2
- for (i=0; i<10; i++){
- // PrintAndLog("DEBUG: FC %d, Cnt %d, Errs %d",fcLens[i],fcCnts[i],errCnt);
- // get the 3 best FC values
- if (fcCnts[i]>maxCnt1) {
- best3=best2;
- best2=best1;
- maxCnt1=fcCnts[i];
- best1=i;
- } else if(fcCnts[i]>fcCnts[best2]){
- best3=best2;
- best2=i;
- } else if(fcCnts[i]>fcCnts[best3]){
- best3=i;
- }
- }
- uint8_t fcH=0, fcL=0;
- if (fcLens[best1]>fcLens[best2]){
- fcH=fcLens[best1];
- fcL=fcLens[best2];
- } else{
- fcH=fcLens[best2];
- fcL=fcLens[best1];
- }
-
- *mostFC=fcLens[best1];
- // TODO: take top 3 answers and compare to known Field clocks to get top 2
-
- uint16_t fcs = (((uint16_t)fcH)<<8) | fcL;
- // PrintAndLog("DEBUG: Best %d best2 %d best3 %d",fcLens[best1],fcLens[best2],fcLens[best3]);
-
- return fcs;
+ uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0};
+ uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0};
+ uint8_t fcLensFnd = 0;
+ uint8_t lastFCcnt=0;
+ uint32_t fcCounter = 0;
+ size_t i;
+ if (size == 0) return 0;
+
+ // prime i to first up transition
+ for (i = 1; i < size-1; i++)
+ if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1])
+ break;
+
+ for (; i < size-1; i++){
+ if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1]){
+ // new up transition
+ fcCounter++;
+
+ //if we had 5 and now have 9 then go back to 8 (for when we get a fc 9 instead of an 8)
+ if (lastFCcnt==5 && fcCounter==9) fcCounter--;
+ //if odd and not rc/5 add one (for when we get a fc 9 instead of 10)
+ if ((fcCounter==9 && fcCounter & 1) || fcCounter==4) fcCounter++;
+
+ // save last field clock count (fc/xx)
+ // find which fcLens to save it to:
+ for (int ii=0; ii<10; ii++){
+ if (fcLens[ii]==fcCounter){
+ fcCnts[ii]++;
+ fcCounter=0;
+ break;
+ }
+ }
+ if (fcCounter>0 && fcLensFnd<10){
+ //add new fc length
+ fcCnts[fcLensFnd]++;
+ fcLens[fcLensFnd++]=fcCounter;
+ }
+ fcCounter=0;
+ } else {
+ // count sample
+ fcCounter++;
+ }
+ }
+
+ uint8_t best1=9, best2=9, best3=9;
+ uint16_t maxCnt1=0;
+ // go through fclens and find which ones are bigest 2
+ for (i=0; i<10; i++){
+ // PrintAndLog("DEBUG: FC %d, Cnt %d, Errs %d",fcLens[i],fcCnts[i],errCnt);
+ // get the 3 best FC values
+ if (fcCnts[i]>maxCnt1) {
+ best3=best2;
+ best2=best1;
+ maxCnt1=fcCnts[i];
+ best1=i;
+ } else if(fcCnts[i]>fcCnts[best2]){
+ best3=best2;
+ best2=i;
+ } else if(fcCnts[i]>fcCnts[best3]){
+ best3=i;
+ }
+ }
+ uint8_t fcH=0, fcL=0;
+ if (fcLens[best1]>fcLens[best2]){
+ fcH=fcLens[best1];
+ fcL=fcLens[best2];
+ } else{
+ fcH=fcLens[best2];
+ fcL=fcLens[best1];
+ }
+
+ *mostFC=fcLens[best1];
+ // TODO: take top 3 answers and compare to known Field clocks to get top 2
+
+ uint16_t fcs = (((uint16_t)fcH)<<8) | fcL;
+ // PrintAndLog("DEBUG: Best %d best2 %d best3 %d",fcLens[best1],fcLens[best2],fcLens[best3]);
+
+ return fcs;
}
//by marshmellow
//counts and returns the 1 most common wave length
uint8_t countPSK_FC(uint8_t *BitStream, size_t size)
{
- uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0};
- uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0};
- uint8_t fcLensFnd = 0;
- uint32_t fcCounter = 0;
- size_t i;
- if (size == 0) return 0;
-
- // prime i to first up transition
- for (i = 1; i < size-1; i++)
- if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1])
- break;
-
- for (; i < size-1; i++){
- if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1]){
- // new up transition
- fcCounter++;
-
- // save last field clock count (fc/xx)
- // find which fcLens to save it to:
- for (int ii=0; ii<10; ii++){
- if (fcLens[ii]==fcCounter){
- fcCnts[ii]++;
- fcCounter=0;
- break;
- }
- }
- if (fcCounter>0 && fcLensFnd<10){
- //add new fc length
- fcCnts[fcLensFnd]++;
- fcLens[fcLensFnd++]=fcCounter;
- }
- fcCounter=0;
- } else {
- // count sample
- fcCounter++;
- }
- }
-
- uint8_t best1=9;
- uint16_t maxCnt1=0;
- // go through fclens and find which ones are bigest
- for (i=0; i<10; i++){
- //PrintAndLog("DEBUG: FC %d, Cnt %d",fcLens[i],fcCnts[i]);
- // get the best FC value
- if (fcCnts[i]>maxCnt1) {
- maxCnt1=fcCnts[i];
- best1=i;
- }
- }
- return fcLens[best1];
+ uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0};
+ uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0};
+ uint8_t fcLensFnd = 0;
+ uint32_t fcCounter = 0;
+ size_t i;
+ if (size == 0) return 0;
+
+ // prime i to first up transition
+ for (i = 1; i < size-1; i++)
+ if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1])
+ break;
+
+ for (; i < size-1; i++){
+ if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1]){
+ // new up transition
+ fcCounter++;
+
+ // save last field clock count (fc/xx)
+ // find which fcLens to save it to:
+ for (int ii=0; ii<10; ii++){
+ if (fcLens[ii]==fcCounter){
+ fcCnts[ii]++;
+ fcCounter=0;
+ break;
+ }
+ }
+ if (fcCounter>0 && fcLensFnd<10){
+ //add new fc length
+ fcCnts[fcLensFnd]++;
+ fcLens[fcLensFnd++]=fcCounter;
+ }
+ fcCounter=0;
+ } else {
+ // count sample
+ fcCounter++;
+ }
+ }
+
+ uint8_t best1=9;
+ uint16_t maxCnt1=0;
+ // go through fclens and find which ones are bigest
+ for (i=0; i<10; i++){
+ //PrintAndLog("DEBUG: FC %d, Cnt %d",fcLens[i],fcCnts[i]);
+ // get the best FC value
+ if (fcCnts[i]>maxCnt1) {
+ maxCnt1=fcCnts[i];
+ best1=i;
+ }
+ }
+ return fcLens[best1];
}
//by marshmellow - demodulate PSK1 wave
//uses wave lengths (# Samples)
int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert)
{
- uint16_t loopCnt = 4096; //don't need to loop through entire array...
- if (size == 0) return -1;
- if (*size<loopCnt) loopCnt = *size;
-
- uint8_t curPhase = *invert;
- size_t i, waveStart=1, waveEnd=0, firstFullWave=0, lastClkBit=0;
- uint8_t fc=0, fullWaveLen=0, tol=1;
- uint16_t errCnt=0, waveLenCnt=0;
- fc = countPSK_FC(dest, *size);
- if (fc!=2 && fc!=4 && fc!=8) return -1;
- //PrintAndLog("DEBUG: FC: %d",fc);
- *clock = DetectPSKClock(dest, *size, *clock);
- if (*clock==0) return -1;
- int avgWaveVal=0, lastAvgWaveVal=0;
- //find first phase shift
- for (i=0; i<loopCnt; i++){
- if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
- waveEnd = i+1;
- //PrintAndLog("DEBUG: waveEnd: %d",waveEnd);
- waveLenCnt = waveEnd-waveStart;
- if (waveLenCnt > fc && waveStart > fc){ //not first peak and is a large wave
- lastAvgWaveVal = avgWaveVal/(waveLenCnt);
- firstFullWave = waveStart;
- fullWaveLen=waveLenCnt;
- //if average wave value is > graph 0 then it is an up wave or a 1
- if (lastAvgWaveVal > 123) curPhase^=1; //fudge graph 0 a little 123 vs 128
- break;
- }
- waveStart = i+1;
- avgWaveVal = 0;
- }
- avgWaveVal+=dest[i+2];
- }
- //PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
- lastClkBit = firstFullWave; //set start of wave as clock align
- //PrintAndLog("DEBUG: clk: %d, lastClkBit: %d", *clock, lastClkBit);
- waveStart = 0;
- errCnt=0;
- size_t numBits=0;
- //set skipped bits
- memset(dest,curPhase^1,firstFullWave / *clock);
- numBits += (firstFullWave / *clock);
- dest[numBits++] = curPhase; //set first read bit
- for (i = firstFullWave+fullWaveLen-1; i < *size-3; i++){
- //top edge of wave = start of new wave
- if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
- if (waveStart == 0) {
- waveStart = i+1;
- waveLenCnt=0;
- avgWaveVal = dest[i+1];
- } else { //waveEnd
- waveEnd = i+1;
- waveLenCnt = waveEnd-waveStart;
- lastAvgWaveVal = avgWaveVal/waveLenCnt;
- if (waveLenCnt > fc){
- //PrintAndLog("DEBUG: avgWaveVal: %d, waveSum: %d",lastAvgWaveVal,avgWaveVal);
- //if this wave is a phase shift
- //PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, i: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+*clock-tol,i+1,fc);
- if (i+1 >= lastClkBit + *clock - tol){ //should be a clock bit
- curPhase^=1;
- dest[numBits++] = curPhase;
- lastClkBit += *clock;
- } else if (i<lastClkBit+10+fc){
- //noise after a phase shift - ignore
- } else { //phase shift before supposed to based on clock
- errCnt++;
- dest[numBits++] = 77;
- }
- } else if (i+1 > lastClkBit + *clock + tol + fc){
- lastClkBit += *clock; //no phase shift but clock bit
- dest[numBits++] = curPhase;
- }
- avgWaveVal=0;
- waveStart=i+1;
- }
- }
- avgWaveVal+=dest[i+1];
- }
- *size = numBits;
- return errCnt;
+ uint16_t loopCnt = 4096; //don't need to loop through entire array...
+ if (size == 0) return -1;
+ if (*size<loopCnt) loopCnt = *size;
+
+ uint8_t curPhase = *invert;
+ size_t i, waveStart=1, waveEnd=0, firstFullWave=0, lastClkBit=0;
+ uint8_t fc=0, fullWaveLen=0, tol=1;
+ uint16_t errCnt=0, waveLenCnt=0;
+ fc = countPSK_FC(dest, *size);
+ if (fc!=2 && fc!=4 && fc!=8) return -1;
+ //PrintAndLog("DEBUG: FC: %d",fc);
+ *clock = DetectPSKClock(dest, *size, *clock);
+ if (*clock==0) return -1;
+ int avgWaveVal=0, lastAvgWaveVal=0;
+ //find first phase shift
+ for (i=0; i<loopCnt; i++){
+ if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
+ waveEnd = i+1;
+ //PrintAndLog("DEBUG: waveEnd: %d",waveEnd);
+ waveLenCnt = waveEnd-waveStart;
+ if (waveLenCnt > fc && waveStart > fc){ //not first peak and is a large wave
+ lastAvgWaveVal = avgWaveVal/(waveLenCnt);
+ firstFullWave = waveStart;
+ fullWaveLen=waveLenCnt;
+ //if average wave value is > graph 0 then it is an up wave or a 1
+ if (lastAvgWaveVal > 123) curPhase^=1; //fudge graph 0 a little 123 vs 128
+ break;
+ }
+ waveStart = i+1;
+ avgWaveVal = 0;
+ }
+ avgWaveVal+=dest[i+2];
+ }
+ //PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
+ lastClkBit = firstFullWave; //set start of wave as clock align
+ //PrintAndLog("DEBUG: clk: %d, lastClkBit: %d", *clock, lastClkBit);
+ waveStart = 0;
+ errCnt=0;
+ size_t numBits=0;
+ //set skipped bits
+ memset(dest,curPhase^1,firstFullWave / *clock);
+ numBits += (firstFullWave / *clock);
+ dest[numBits++] = curPhase; //set first read bit
+ for (i = firstFullWave+fullWaveLen-1; i < *size-3; i++){
+ //top edge of wave = start of new wave
+ if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
+ if (waveStart == 0) {
+ waveStart = i+1;
+ waveLenCnt=0;
+ avgWaveVal = dest[i+1];
+ } else { //waveEnd
+ waveEnd = i+1;
+ waveLenCnt = waveEnd-waveStart;
+ lastAvgWaveVal = avgWaveVal/waveLenCnt;
+ if (waveLenCnt > fc){
+ //PrintAndLog("DEBUG: avgWaveVal: %d, waveSum: %d",lastAvgWaveVal,avgWaveVal);
+ //if this wave is a phase shift
+ //PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, i: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+*clock-tol,i+1,fc);
+ if (i+1 >= lastClkBit + *clock - tol){ //should be a clock bit
+ curPhase^=1;
+ dest[numBits++] = curPhase;
+ lastClkBit += *clock;
+ } else if (i<lastClkBit+10+fc){
+ //noise after a phase shift - ignore
+ } else { //phase shift before supposed to based on clock
+ errCnt++;
+ dest[numBits++] = 77;
+ }
+ } else if (i+1 > lastClkBit + *clock + tol + fc){
+ lastClkBit += *clock; //no phase shift but clock bit
+ dest[numBits++] = curPhase;
+ }
+ avgWaveVal=0;
+ waveStart=i+1;
+ }
+ }
+ avgWaveVal+=dest[i+1];
+ }
+ *size = numBits;
+ return errCnt;
}
projects / proxmark3-svn / commitdiff