#include "ui.h"
#include "mbedtls/des.h"
#include "cmdhfmf.h"
+#include "cmdhf14a.h" // DropField()
#include "mifare.h"
#include "util.h"
#include "protocols.h"
#include "taginfo.h"
+typedef enum TAGTYPE_UL {
+ UNKNOWN = 0x000000,
+ UL = 0x000001,
+ UL_C = 0x000002,
+ UL_EV1_48 = 0x000004,
+ UL_EV1_128 = 0x000008,
+ NTAG = 0x000010,
+ NTAG_203 = 0x000020,
+ NTAG_210 = 0x000040,
+ NTAG_212 = 0x000080,
+ NTAG_213 = 0x000100,
+ NTAG_215 = 0x000200,
+ NTAG_216 = 0x000400,
+ MY_D = 0x000800,
+ MY_D_NFC = 0x001000,
+ MY_D_MOVE = 0x002000,
+ MY_D_MOVE_NFC = 0x004000,
+ MY_D_MOVE_LEAN= 0x008000,
+ NTAG_I2C_1K = 0x010000,
+ NTAG_I2C_2K = 0x020000,
+ FUDAN_UL = 0x040000,
+ MAGIC = 0x080000,
+ UL_MAGIC = UL | MAGIC,
+ UL_C_MAGIC = UL_C | MAGIC,
+ UL_ERROR = 0xFFFFFF,
+} TagTypeUL_t;
+
#define MAX_UL_BLOCKS 0x0f
#define MAX_ULC_BLOCKS 0x2b
#define MAX_ULEV1a_BLOCKS 0x13
#define MAX_MY_D_MOVE 0x25
#define MAX_MY_D_MOVE_LEAN 0x0f
+#define PUBLIC_ECDA_KEYLEN 33
+static uint8_t public_ecda_key[PUBLIC_ECDA_KEYLEN] = {
+ 0x04, 0x49, 0x4e, 0x1a, 0x38, 0x6d, 0x3d, 0x3c,
+ 0xfe, 0x3d, 0xc1, 0x0e, 0x5d, 0xe6, 0x8a, 0x49,
+ 0x9b, 0x1c, 0x20, 0x2d, 0xb5, 0xb1, 0x32, 0x39,
+ 0x3e, 0x89, 0xed, 0x19, 0xfe, 0x5b, 0xe8, 0xbc,
+ 0x61
+};
+
#define KEYS_3DES_COUNT 7
-uint8_t default_3des_keys[KEYS_3DES_COUNT][16] = {
- { 0x42,0x52,0x45,0x41,0x4b,0x4d,0x45,0x49,0x46,0x59,0x4f,0x55,0x43,0x41,0x4e,0x21 },// 3des std key
- { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },// all zeroes
- { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f },// 0x00-0x0F
- { 0x49,0x45,0x4D,0x4B,0x41,0x45,0x52,0x42,0x21,0x4E,0x41,0x43,0x55,0x4F,0x59,0x46 },// NFC-key
- { 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 },// all ones
- { 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF },// all FF
- { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF } // 11 22 33
+static uint8_t default_3des_keys[KEYS_3DES_COUNT][16] = {
+ { 0x42,0x52,0x45,0x41,0x4b,0x4d,0x45,0x49,0x46,0x59,0x4f,0x55,0x43,0x41,0x4e,0x21 },// 3des std key
+ { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },// all zeroes
+ { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f },// 0x00-0x0F
+ { 0x49,0x45,0x4D,0x4B,0x41,0x45,0x52,0x42,0x21,0x4E,0x41,0x43,0x55,0x4F,0x59,0x46 },// NFC-key
+ { 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 },// all ones
+ { 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF },// all FF
+ { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF } // 11 22 33
};
#define KEYS_PWD_COUNT 6
-uint8_t default_pwd_pack[KEYS_PWD_COUNT][4] = {
+static uint8_t default_pwd_pack[KEYS_PWD_COUNT][4] = {
{0xFF,0xFF,0xFF,0xFF}, // PACK 0x00,0x00 -- factory default
-
{0x4A,0xF8,0x4B,0x19}, // PACK 0xE5,0xBE -- italian bus (sniffed)
{0x33,0x6B,0xA1,0x19}, // PACK 0x9c,0x2d -- italian bus (sniffed)
- {0xFF,0x90,0x6C,0xB2}, // PACK 0x12,0x9e -- italian bus (sniffed)
+ {0xFF,0x90,0x6C,0xB2}, // PACK 0x12,0x9e -- italian bus (sniffed)
{0x46,0x1c,0xA3,0x19}, // PACK 0xE9,0x5A -- italian bus (sniffed)
{0x35,0x1C,0xD0,0x19}, // PACK 0x9A,0x5a -- italian bus (sniffed)
};
#define MAX_UL_TYPES 18
-uint32_t UL_TYPES_ARRAY[MAX_UL_TYPES] = {UNKNOWN, UL, UL_C, UL_EV1_48, UL_EV1_128, NTAG, NTAG_203,
- NTAG_210, NTAG_212, NTAG_213, NTAG_215, NTAG_216, MY_D, MY_D_NFC, MY_D_MOVE, MY_D_MOVE_NFC, MY_D_MOVE_LEAN, FUDAN_UL};
-
-uint8_t UL_MEMORY_ARRAY[MAX_UL_TYPES] = {MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_ULC_BLOCKS, MAX_ULEV1a_BLOCKS,
- MAX_ULEV1b_BLOCKS, MAX_NTAG_203, MAX_NTAG_203, MAX_NTAG_210, MAX_NTAG_212, MAX_NTAG_213,
- MAX_NTAG_215, MAX_NTAG_216, MAX_UL_BLOCKS, MAX_MY_D_NFC, MAX_MY_D_MOVE, MAX_MY_D_MOVE, MAX_MY_D_MOVE_LEAN, MAX_UL_BLOCKS};
+static uint32_t UL_TYPES_ARRAY[MAX_UL_TYPES] = {UNKNOWN, UL, UL_C, UL_EV1_48, UL_EV1_128, NTAG, NTAG_203,
+ NTAG_210, NTAG_212, NTAG_213, NTAG_215, NTAG_216, MY_D, MY_D_NFC, MY_D_MOVE, MY_D_MOVE_NFC, MY_D_MOVE_LEAN, FUDAN_UL};
+static uint8_t UL_MEMORY_ARRAY[MAX_UL_TYPES] = {MAX_UL_BLOCKS, MAX_UL_BLOCKS, MAX_ULC_BLOCKS, MAX_ULEV1a_BLOCKS,
+ MAX_ULEV1b_BLOCKS, MAX_NTAG_203, MAX_NTAG_203, MAX_NTAG_210, MAX_NTAG_212, MAX_NTAG_213,
+ MAX_NTAG_215, MAX_NTAG_216, MAX_UL_BLOCKS, MAX_MY_D_NFC, MAX_MY_D_MOVE, MAX_MY_D_MOVE, MAX_MY_D_MOVE_LEAN, MAX_UL_BLOCKS};
-static int CmdHelp(const char *Cmd);
-// get version nxp product type
-char *getProductTypeStr( uint8_t id){
+// get version nxp product type
+static char *getProductTypeStr( uint8_t id){
static char buf[20];
char *retStr = buf;
switch(id) {
case 3: sprintf(retStr, "%02X, Ultralight", id); break;
- case 4: sprintf(retStr, "%02X, NTAG", id); break;
+ case 4: sprintf(retStr, "%02X, NTAG", id); break;
default: sprintf(retStr, "%02X, unknown", id); break;
}
return buf;
}
/*
- The 7 MSBits (=n) code the storage size itself based on 2^n,
+ The 7 MSBits (=n) code the storage size itself based on 2^n,
the LSBit is set to '0' if the size is exactly 2^n
- and set to '1' if the storage size is between 2^n and 2^(n+1).
+ and set to '1' if the storage size is between 2^n and 2^(n+1).
*/
char *getUlev1CardSizeStr( uint8_t fsize ){
// is LSB set?
if ( fsize & 1 )
sprintf(retStr, "%02X, (%u <-> %u bytes)",fsize, usize, lsize);
- else
- sprintf(retStr, "%02X, (%u bytes)", fsize, lsize);
+ else
+ sprintf(retStr, "%02X, (%u bytes)", fsize, lsize);
return buf;
}
if (append_crc)
c.arg[0] |= ISO14A_APPEND_CRC;
- memcpy(c.d.asBytes, cmd, cmdlen);
+ memcpy(c.d.asBytes, cmd, cmdlen);
clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
bool ans = false;
ans = WaitForResponseTimeout(CMD_ACK, &resp, 1500);
if (!ans || resp.arg[0] < 1) {
- PrintAndLog("iso14443a card select failed");
+ PrintAndLogEx(WARNING, "iso14443a card select failed");
DropField();
return 0;
}
if ( hasAuthKey && (tagtype & UL_C)) {
//will select card automatically and close connection on error
if (!ulc_authentication(authenticationkey, false)) {
- PrintAndLog("Error: Authentication Failed UL-C");
+ PrintAndLogEx(WARNING, "Authentication Failed UL-C");
return 0;
}
} else {
if (hasAuthKey) {
if (ulev1_requestAuthentication(authenticationkey, pack, packSize) < 1) {
DropField();
- PrintAndLog("Error: Authentication Failed UL-EV1/NTAG");
+ PrintAndLogEx(WARNING, "Authentication Failed UL-EV1/NTAG");
return 0;
}
}
static int ulev1_getVersion( uint8_t *response, uint16_t responseLength ){
- uint8_t cmd[] = {MIFARE_ULEV1_VERSION};
+ uint8_t cmd[] = {MIFARE_ULEV1_VERSION};
int len = ul_send_cmd_raw(cmd, sizeof(cmd), response, responseLength);
return len;
}
// static int ulev1_fastRead( uint8_t startblock, uint8_t endblock, uint8_t *response ){
-
+
// uint8_t cmd[] = {MIFARE_ULEV1_FASTREAD, startblock, endblock};
-
+
// if ( !ul_send_cmd_raw(cmd, sizeof(cmd), response)){
// return -1;
// }
// Fudan check checks for which error is given for a command with incorrect crc
// NXP UL chip responds with 01, fudan 00.
// other possible checks:
-// send a0 + crc
+// send a0 + crc
// UL responds with 00, fudan doesn't respond
// or
// send a200 + crc
// make sure field is off before calling this function
static int ul_fudan_check( void ){
iso14a_card_select_t card;
- if ( !ul_select(&card) )
+ if ( !ul_select(&card) )
return UL_ERROR;
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT, 4, 0}};
uid[5] = data[6];
uid[6] = data[7];
- PrintAndLog(" UID : %s ", sprint_hex(uid, 7));
- PrintAndLog(" UID[0] : %02X, %s", uid[0], getManufacturerName(uid[0]));
+ PrintAndLogEx(NORMAL," UID : %s ", sprint_hex(uid, 7));
+ PrintAndLogEx(NORMAL," UID[0] : %02X, %s", uid[0], getManufacturerName(uid[0]));
if ( uid[0] == 0x05 && ((uid[1] & 0xf0) >> 4) == 2 ) { // is infineon and 66RxxP
uint8_t chip = (data[8] & 0xC7); // 11000111 mask, bit 3,4,5 RFU
switch (chip){
- case 0xc2: PrintAndLog(" IC type : SLE 66R04P 770 Bytes"); break; //77 pages
- case 0xc4: PrintAndLog(" IC type : SLE 66R16P 2560 Bytes"); break; //256 pages
- case 0xc6: PrintAndLog(" IC type : SLE 66R32P 5120 Bytes"); break; //512 pages /2 sectors
+ case 0xc2: PrintAndLogEx(NORMAL, " IC type : SLE 66R04P 770 Bytes"); break; //77 pages
+ case 0xc4: PrintAndLogEx(NORMAL, " IC type : SLE 66R16P 2560 Bytes"); break; //256 pages
+ case 0xc6: PrintAndLogEx(NORMAL, " IC type : SLE 66R32P 5120 Bytes"); break; //512 pages /2 sectors
}
}
- // CT (cascade tag byte) 0x88 xor SN0 xor SN1 xor SN2
+ // CT (cascade tag byte) 0x88 xor SN0 xor SN1 xor SN2
int crc0 = 0x88 ^ data[0] ^ data[1] ^data[2];
if ( data[3] == crc0 )
- PrintAndLog(" BCC0 : %02X, Ok", data[3]);
+ PrintAndLogEx(NORMAL, " BCC0 : %02X, Ok", data[3]);
else
- PrintAndLog(" BCC0 : %02X, crc should be %02X", data[3], crc0);
+ PrintAndLogEx(NORMAL, " BCC0 : %02X, crc should be %02X", data[3], crc0);
int crc1 = data[4] ^ data[5] ^ data[6] ^data[7];
if ( data[8] == crc1 )
- PrintAndLog(" BCC1 : %02X, Ok", data[8]);
+ PrintAndLogEx(NORMAL, " BCC1 : %02X, Ok", data[8]);
else
- PrintAndLog(" BCC1 : %02X, crc should be %02X", data[8], crc1 );
+ PrintAndLogEx(NORMAL, " BCC1 : %02X, crc should be %02X", data[8], crc1 );
- PrintAndLog(" Internal : %02X, %sdefault", data[9], (data[9]==0x48)?"":"not " );
+ PrintAndLogEx(NORMAL, " Internal : %02X, %sdefault", data[9], (data[9]==0x48)?"":"not " );
- PrintAndLog(" Lock : %s - %s",
+ PrintAndLogEx(NORMAL, " Lock : %s (binary %s %s)",
sprint_hex(data+10, 2),
- printBits(2, data+10)
+ printBits(1, data+10),
+ printBits(1, data+11)
);
- PrintAndLog("OneTimePad : %s - %s\n",
+ PrintAndLogEx(NORMAL, "OneTimePad : %s (binary %s %s %s %s)\n",
sprint_hex(data + 12, 4),
- printBits(4, data+12)
+ printBits(1, data+12),
+ printBits(1, data+13),
+ printBits(1, data+14),
+ printBits(1, data+15)
);
return 0;
if(data[0] != 0xe1)
return -1;
- PrintAndLog("--- NDEF Message");
- PrintAndLog("Capability Container: %s", sprint_hex(data,4) );
- PrintAndLog(" %02X : NDEF Magic Number", data[0]);
- PrintAndLog(" %02X : version %d.%d supported by tag", data[1], (data[1] & 0xF0) >> 4, data[1] & 0x0f);
- PrintAndLog(" %02X : Physical Memory Size: %d bytes", data[2], (data[2] + 1) * 8);
+ PrintAndLogEx(NORMAL, "--- NDEF Message");
+ PrintAndLogEx(NORMAL, "Capability Container: %s", sprint_hex(data,4) );
+ PrintAndLogEx(NORMAL, " %02X : NDEF Magic Number", data[0]);
+ PrintAndLogEx(NORMAL, " %02X : version %d.%d supported by tag", data[1], (data[1] & 0xF0) >> 4, data[1] & 0x0f);
+ PrintAndLogEx(NORMAL, " %02X : Physical Memory Size: %d bytes", data[2], (data[2] + 1) * 8);
if ( data[2] == 0x12 )
- PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data[2], 144);
+ PrintAndLogEx(NORMAL, " %02X : NDEF Memory Size: %d bytes", data[2], 144);
else if ( data[2] == 0x3e )
- PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data[2], 496);
+ PrintAndLogEx(NORMAL, " %02X : NDEF Memory Size: %d bytes", data[2], 496);
else if ( data[2] == 0x6d )
- PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data[2], 872);
+ PrintAndLogEx(NORMAL, " %02X : NDEF Memory Size: %d bytes", data[2], 872);
- PrintAndLog(" %02X : %s / %s", data[3],
- (data[3] & 0xF0) ? "(RFU)" : "Read access granted without any security",
+ PrintAndLogEx(NORMAL, " %02X : %s / %s", data[3],
+ (data[3] & 0xF0) ? "(RFU)" : "Read access granted without any security",
(data[3] & 0x0F)==0 ? "Write access granted without any security" : (data[3] & 0x0F)==0x0F ? "No write access granted at all" : "(RFU)");
return 0;
}
spc[10]=0x00;
char *spacer = spc + (10-spaces);
- if ( tagtype & UL )
- PrintAndLog("%sTYPE : MIFARE Ultralight (MF0ICU1) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
+ if ( tagtype & UL )
+ PrintAndLogEx(NORMAL, "%sTYPE : MIFARE Ultralight (MF0ICU1) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
else if ( tagtype & UL_C)
- PrintAndLog("%sTYPE : MIFARE Ultralight C (MF0ULC) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
+ PrintAndLogEx(NORMAL, "%sTYPE : MIFARE Ultralight C (MF0ULC) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
else if ( tagtype & UL_EV1_48)
- PrintAndLog("%sTYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)", spacer);
- else if ( tagtype & UL_EV1_128)
- PrintAndLog("%sTYPE : MIFARE Ultralight EV1 128bytes (MF0UL2101)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)", spacer);
+ else if ( tagtype & UL_EV1_128)
+ PrintAndLogEx(NORMAL, "%sTYPE : MIFARE Ultralight EV1 128bytes (MF0UL2101)", spacer);
else if ( tagtype & NTAG )
- PrintAndLog("%sTYPE : NTAG UNKNOWN", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG UNKNOWN", spacer);
else if ( tagtype & NTAG_203 )
- PrintAndLog("%sTYPE : NTAG 203 144bytes (NT2H0301F0DT)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 203 144bytes (NT2H0301F0DT)", spacer);
else if ( tagtype & NTAG_210 )
- PrintAndLog("%sTYPE : NTAG 210 48bytes (NT2L1011G0DU)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 210 48bytes (NT2L1011G0DU)", spacer);
else if ( tagtype & NTAG_212 )
- PrintAndLog("%sTYPE : NTAG 212 128bytes (NT2L1211G0DU)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 212 128bytes (NT2L1211G0DU)", spacer);
else if ( tagtype & NTAG_213 )
- PrintAndLog("%sTYPE : NTAG 213 144bytes (NT2H1311G0DU)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 213 144bytes (NT2H1311G0DU)", spacer);
else if ( tagtype & NTAG_215 )
- PrintAndLog("%sTYPE : NTAG 215 504bytes (NT2H1511G0DU)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 215 504bytes (NT2H1511G0DU)", spacer);
else if ( tagtype & NTAG_216 )
- PrintAndLog("%sTYPE : NTAG 216 888bytes (NT2H1611G0DU)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG 216 888bytes (NT2H1611G0DU)", spacer);
else if ( tagtype & NTAG_I2C_1K )
- PrintAndLog("%sTYPE : NTAG I%sC 888bytes (NT3H1101FHK)", spacer, "\xFD");
- else if ( tagtype & NTAG_I2C_2K )
- PrintAndLog("%sTYPE : NTAG I%sC 1904bytes (NT3H1201FHK)", spacer, "\xFD");
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG I%sC 888bytes (NT3H1101FHK)", spacer, "\xFD");
+ else if ( tagtype & NTAG_I2C_2K )
+ PrintAndLogEx(NORMAL, "%sTYPE : NTAG I%sC 1904bytes (NT3H1201FHK)", spacer, "\xFD");
else if ( tagtype & MY_D )
- PrintAndLog("%sTYPE : INFINEON my-d\x99 (SLE 66RxxS)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : INFINEON my-d\x99 (SLE 66RxxS)", spacer);
else if ( tagtype & MY_D_NFC )
- PrintAndLog("%sTYPE : INFINEON my-d\x99 NFC (SLE 66RxxP)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : INFINEON my-d\x99 NFC (SLE 66RxxP)", spacer);
else if ( tagtype & MY_D_MOVE )
- PrintAndLog("%sTYPE : INFINEON my-d\x99 move (SLE 66R01P)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : INFINEON my-d\x99 move (SLE 66R01P)", spacer);
else if ( tagtype & MY_D_MOVE_NFC )
- PrintAndLog("%sTYPE : INFINEON my-d\x99 move NFC (SLE 66R01P)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : INFINEON my-d\x99 move NFC (SLE 66R01P)", spacer);
else if ( tagtype & MY_D_MOVE_LEAN )
- PrintAndLog("%sTYPE : INFINEON my-d\x99 move lean (SLE 66R01L)", spacer);
+ PrintAndLogEx(NORMAL, "%sTYPE : INFINEON my-d\x99 move lean (SLE 66R01L)", spacer);
else if ( tagtype & FUDAN_UL )
- PrintAndLog("%sTYPE : FUDAN Ultralight Compatible (or other compatible) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
+ PrintAndLogEx(NORMAL, "%sTYPE : FUDAN Ultralight Compatible (or other compatible) %s", spacer, (tagtype & MAGIC) ? "<magic>" : "" );
else
- PrintAndLog("%sTYPE : Unknown %06x", spacer, tagtype);
+ PrintAndLogEx(NORMAL, "%sTYPE : Unknown %06x", spacer, tagtype);
return 0;
}
static int ulc_print_3deskey( uint8_t *data){
- PrintAndLog(" deskey1 [44/0x2C] : %s [%.4s]", sprint_hex(data ,4),data);
- PrintAndLog(" deskey1 [45/0x2D] : %s [%.4s]", sprint_hex(data+4 ,4),data+4);
- PrintAndLog(" deskey2 [46/0x2E] : %s [%.4s]", sprint_hex(data+8 ,4),data+8);
- PrintAndLog(" deskey2 [47/0x2F] : %s [%.4s]", sprint_hex(data+12,4),data+12);
- PrintAndLog("\n 3des key : %s", sprint_hex(SwapEndian64(data, 16, 8), 16));
+ PrintAndLogEx(NORMAL, " deskey1 [44/0x2C] : %s [%.4s]", sprint_hex(data ,4),data);
+ PrintAndLogEx(NORMAL, " deskey1 [45/0x2D] : %s [%.4s]", sprint_hex(data+4 ,4),data+4);
+ PrintAndLogEx(NORMAL, " deskey2 [46/0x2E] : %s [%.4s]", sprint_hex(data+8 ,4),data+8);
+ PrintAndLogEx(NORMAL, " deskey2 [47/0x2F] : %s [%.4s]", sprint_hex(data+12,4),data+12);
+ PrintAndLogEx(NORMAL, "\n 3des key : %s", sprint_hex(SwapEndian64(data, 16, 8), 16));
return 0;
}
static int ulc_print_configuration( uint8_t *data){
- PrintAndLog("--- UL-C Configuration");
- PrintAndLog(" Higher Lockbits [40/0x28] : %s - %s", sprint_hex(data, 4), printBits(2, data));
- PrintAndLog(" Counter [41/0x29] : %s - %s", sprint_hex(data+4, 4), printBits(2, data+4));
+ PrintAndLogEx(NORMAL, "--- UL-C Configuration");
+ PrintAndLogEx(NORMAL, " Higher Lockbits [40/0x28] : %s (binary %s %s)",
+ sprint_hex(data, 2),
+ printBits(1, data),
+ printBits(1, data+1)
+ );
+ PrintAndLogEx(NORMAL, " Counter [41/0x29] : %s (binary %s %s %s %s)",
+ sprint_hex(data+4, 4),
+ printBits(1, data+4),
+ printBits(1, data+5),
+ printBits(1, data+6),
+ printBits(1, data+7)
+ );
bool validAuth = (data[8] >= 0x03 && data[8] <= 0x30);
if ( validAuth )
- PrintAndLog(" Auth0 [42/0x2A] : %s page %d/0x%02X and above need authentication", sprint_hex(data+8, 4), data[8],data[8] );
+ PrintAndLogEx(NORMAL, " Auth0 [42/0x2A] : %s page %d/0x%02X and above need authentication", sprint_hex(data+8, 4), data[8], data[8] );
else{
if ( data[8] == 0){
- PrintAndLog(" Auth0 [42/0x2A] : %s default", sprint_hex(data+8, 4) );
+ PrintAndLogEx(NORMAL, " Auth0 [42/0x2A] : %s default", sprint_hex(data+8, 4) );
} else {
- PrintAndLog(" Auth0 [42/0x2A] : %s auth byte is out-of-range", sprint_hex(data+8, 4) );
+ PrintAndLogEx(NORMAL, " Auth0 [42/0x2A] : %s auth byte is out-of-range", sprint_hex(data+8, 4) );
}
}
- PrintAndLog(" Auth1 [43/0x2B] : %s %s",
+ PrintAndLogEx(NORMAL, " Auth1 [43/0x2B] : %s %s",
sprint_hex(data+12, 4),
(data[12] & 1) ? "write access restricted": "read and write access restricted"
);
static int ulev1_print_configuration( uint8_t *data, uint8_t startPage){
- PrintAndLog("\n--- Tag Configuration");
+ PrintAndLogEx(NORMAL, "\n--- Tag Configuration");
bool strg_mod_en = (data[0] & 2);
uint8_t authlim = (data[4] & 0x07);
bool prot = (data[4] & 0x80);
uint8_t vctid = data[5];
- PrintAndLog(" cfg0 [%u/0x%02X] : %s", startPage, startPage, sprint_hex(data, 4));
+ PrintAndLogEx(NORMAL, " cfg0 [%u/0x%02X] : %s", startPage, startPage, sprint_hex(data, 4));
if ( data[3] < 0xff )
- PrintAndLog(" - page %d and above need authentication",data[3]);
- else
- PrintAndLog(" - pages don't need authentication");
- PrintAndLog(" - strong modulation mode %s", (strg_mod_en) ? "enabled":"disabled");
- PrintAndLog(" cfg1 [%u/0x%02X] : %s", startPage + 1, startPage + 1, sprint_hex(data+4, 4) );
+ PrintAndLogEx(NORMAL, " - page %d and above need authentication",data[3]);
+ else
+ PrintAndLogEx(NORMAL, " - pages don't need authentication");
+ PrintAndLogEx(NORMAL, " - strong modulation mode %s", (strg_mod_en) ? "enabled" : "disabled");
+ PrintAndLogEx(NORMAL, " cfg1 [%u/0x%02X] : %s", startPage + 1, startPage + 1, sprint_hex(data+4, 4) );
if ( authlim == 0)
- PrintAndLog(" - Unlimited password attempts");
+ PrintAndLogEx(NORMAL, " - Unlimited password attempts");
else
- PrintAndLog(" - Max number of password attempts is %d", authlim);
- PrintAndLog(" - user configuration %s", cfglck ? "permanently locked":"writeable");
- PrintAndLog(" - %s access is protected with password", prot ? "read and write":"write");
- PrintAndLog(" - %02X, Virtual Card Type Identifier is %s default", vctid, (vctid==0x05)? "":"not");
- PrintAndLog(" PWD [%u/0x%02X] : %s- (cannot be read)", startPage + 2, startPage + 2, sprint_hex(data+8, 4));
- PrintAndLog(" PACK [%u/0x%02X] : %s - (cannot be read)", startPage + 3, startPage + 3, sprint_hex(data+12, 2));
- PrintAndLog(" RFU [%u/0x%02X] : %s- (cannot be read)", startPage + 3, startPage + 3, sprint_hex(data+12, 2));
+ PrintAndLogEx(NORMAL, " - Max number of password attempts is %d", authlim);
+ PrintAndLogEx(NORMAL, " - user configuration %s", cfglck ? "permanently locked":"writeable");
+ PrintAndLogEx(NORMAL, " - %s access is protected with password", prot ? "read and write":"write");
+ PrintAndLogEx(NORMAL, " - %02X, Virtual Card Type Identifier is %s default", vctid, (vctid==0x05)? "":"not");
+ PrintAndLogEx(NORMAL, " PWD [%u/0x%02X] : %s- (cannot be read)", startPage + 2, startPage + 2, sprint_hex(data+8, 4));
+ PrintAndLogEx(NORMAL, " PACK [%u/0x%02X] : %s - (cannot be read)", startPage + 3, startPage + 3, sprint_hex(data+12, 2));
+ PrintAndLogEx(NORMAL, " RFU [%u/0x%02X] : %s- (cannot be read)", startPage + 3, startPage + 3, sprint_hex(data+14, 2));
return 0;
}
static int ulev1_print_counters(){
- PrintAndLog("--- Tag Counters");
+ PrintAndLogEx(NORMAL, "--- Tag Counters");
uint8_t tear[1] = {0};
uint8_t counter[3] = {0,0,0};
uint16_t len = 0;
ulev1_readTearing(i,tear,sizeof(tear));
len = ulev1_readCounter(i,counter, sizeof(counter) );
if (len == 3) {
- PrintAndLog(" [%0d] : %s", i, sprint_hex(counter,3));
- PrintAndLog(" - %02X tearing %s", tear[0], ( tear[0]==0xBD)?"Ok":"failure");
+ PrintAndLogEx(NORMAL, " [%0d] : %s", i, sprint_hex(counter,3));
+ PrintAndLogEx(NORMAL, " - %02X tearing %s", tear[0], ( tear[0]==0xBD)?"Ok":"failure");
}
}
return len;
}
static int ulev1_print_signature( uint8_t *data, uint8_t len){
- PrintAndLog("\n--- Tag Signature");
- //PrintAndLog("IC signature public key name : NXP NTAG21x 2013"); // don't know if there is other NXP public keys.. :(
- PrintAndLog("IC signature public key value : 04494e1a386d3d3cfe3dc10e5de68a499b1c202db5b132393e89ed19fe5be8bc61");
- PrintAndLog(" Elliptic curve parameters : secp128r1");
- PrintAndLog(" Tag ECC Signature : %s", sprint_hex(data, len));
+ PrintAndLogEx(NORMAL, "\n--- Tag Signature");
+ PrintAndLogEx(NORMAL, "IC signature public key name : NXP NTAG21x (2013)");
+ PrintAndLogEx(NORMAL, "IC signature public key value : %s", sprint_hex(public_ecda_key, PUBLIC_ECDA_KEYLEN));
+ PrintAndLogEx(NORMAL, " Elliptic curve parameters : secp128r1");
+ PrintAndLogEx(NORMAL, " Tag ECC Signature : %s", sprint_hex(data, len));
//to do: verify if signature is valid
- //PrintAndLog("IC signature status: %s valid", (iseccvalid() )?"":"not");
+ //PrintAndLogEx(NORMAL, "IC signature status: %s valid", (iseccvalid() )?"":"not");
return 0;
}
static int ulev1_print_version(uint8_t *data){
- PrintAndLog("\n--- Tag Version");
- PrintAndLog(" Raw bytes : %s",sprint_hex(data, 8) );
- PrintAndLog(" Vendor ID : %02X, %s", data[1], getManufacturerName(data[1]));
- PrintAndLog(" Product type : %s", getProductTypeStr(data[2]));
- PrintAndLog(" Product subtype : %02X, %s", data[3], (data[3]==1) ?"17 pF":"50pF");
- PrintAndLog(" Major version : %02X", data[4]);
- PrintAndLog(" Minor version : %02X", data[5]);
- PrintAndLog(" Size : %s", getUlev1CardSizeStr(data[6]));
- PrintAndLog(" Protocol type : %02X", data[7]);
+ PrintAndLogEx(NORMAL, "\n--- Tag Version");
+ PrintAndLogEx(NORMAL, " Raw bytes : %s",sprint_hex(data, 8) );
+ PrintAndLogEx(NORMAL, " Vendor ID : %02X, %s", data[1], getManufacturerName(data[1]));
+ PrintAndLogEx(NORMAL, " Product type : %s", getProductTypeStr(data[2]));
+ PrintAndLogEx(NORMAL, " Product subtype : %02X, %s", data[3], (data[3]==1) ?"17 pF":"50pF");
+ PrintAndLogEx(NORMAL, " Major version : %02X", data[4]);
+ PrintAndLogEx(NORMAL, " Minor version : %02X", data[5]);
+ PrintAndLogEx(NORMAL, " Size : %s", getUlev1CardSizeStr(data[6]));
+ PrintAndLogEx(NORMAL, " Protocol type : %02X", data[7]);
return 0;
}
returnValue = ( !memcmp(nonce1, nonce2, 11) ) ? UL_C_MAGIC : UL_C;
} else {
returnValue = UL;
- }
+ }
DropField();
return returnValue;
}
static int ul_magic_test(){
// Magic Ultralight tests
- // 1) take present UID, and try to write it back. OBSOLETE
+ // 1) take present UID, and try to write it back. OBSOLETE
// 2) make a wrong length write to page0, and see if tag answers with ACK/NACK:
iso14a_card_select_t card;
- if ( !ul_select(&card) )
+ if ( !ul_select(&card) )
return UL_ERROR;
int status = ul_comp_write(0, NULL, 0);
DropField();
- if ( status == 0 )
+ if ( status == 0 )
return MAGIC;
return 0;
}
if (!ul_select(&card)) return UL_ERROR;
- // Ultralight - ATQA / SAK
+ // Ultralight - ATQA / SAK
if ( card.atqa[1] != 0x00 || card.atqa[0] != 0x44 || card.sak != 0x00 ) {
- PrintAndLog("Tag is not Ultralight | NTAG | MY-D [ATQA: %02X %02X SAK: %02X]\n", card.atqa[1], card.atqa[0], card.sak);
+ PrintAndLogEx(NORMAL, "Tag is not Ultralight | NTAG | MY-D [ATQA: %02X %02X SAK: %02X]\n", card.atqa[1], card.atqa[0], card.sak);
DropField();
return UL_ERROR;
}
DropField();
if (status > 1) {
tagtype = UL_C;
- } else {
+ } else {
// need to re-select after authentication error
if ( !ul_select(&card) ) return UL_ERROR;
}
}
if (tagtype & UL) {
- tagtype = ul_fudan_check();
+ tagtype = ul_fudan_check();
DropField();
}
} else {
DropField();
- // Infinition MY-D tests Exam high nibble
+ // Infinition MY-D tests Exam high nibble
uint8_t nib = (card.uid[1] & 0xf0) >> 4;
switch ( nib ){
// case 0: tagtype = SLE66R35E7; break; //or SLE 66R35E7 - mifare compat... should have different sak/atqa for mf 1k
- case 1: tagtype = MY_D; break; //or SLE 66RxxS ... up to 512 pages of 8 user bytes...
- case 2: tagtype = (MY_D_NFC); break; //or SLE 66RxxP ... up to 512 pages of 8 user bytes... (or in nfc mode FF pages of 4 bytes)
- case 3: tagtype = (MY_D_MOVE | MY_D_MOVE_NFC); break; //or SLE 66R01P // 38 pages of 4 bytes //notice: we can not currently distinguish between these two
+ case 1: tagtype = MY_D; break; //or SLE 66RxxS ... up to 512 pages of 8 user bytes...
+ case 2: tagtype = (MY_D_NFC); break; //or SLE 66RxxP ... up to 512 pages of 8 user bytes... (or in nfc mode FF pages of 4 bytes)
+ case 3: tagtype = (MY_D_MOVE | MY_D_MOVE_NFC); break; //or SLE 66R01P // 38 pages of 4 bytes //notice: we can not currently distinguish between these two
case 7: tagtype = MY_D_MOVE_LEAN; break; //or SLE 66R01L // 16 pages of 4 bytes
}
}
return tagtype;
}
-int CmdHF14AMfUInfo(const char *Cmd){
+static int usage_hf_mfu_info(void) {
+ PrintAndLogEx(NORMAL, "It gathers information about the tag and tries to detect what kind it is.");
+ PrintAndLogEx(NORMAL, "Sometimes the tags are locked down, and you may need a key to be able to read the information");
+ PrintAndLogEx(NORMAL, "The following tags can be identified:\n");
+ PrintAndLogEx(NORMAL, "Ultralight, Ultralight-C, Ultralight EV1, NTAG 203, NTAG 210,");
+ PrintAndLogEx(NORMAL, "NTAG 212, NTAG 213, NTAG 215, NTAG 216, NTAG I2C 1K & 2K");
+ PrintAndLogEx(NORMAL, "my-d, my-d NFC, my-d move, my-d move NFC\n");
+ PrintAndLogEx(NORMAL, "Usage: hf mfu info k <key> l");
+ PrintAndLogEx(NORMAL, " Options : ");
+ PrintAndLogEx(NORMAL, " k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLogEx(NORMAL, " l : (optional) swap entered key's endianness");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, " sample : hf mfu info");
+ PrintAndLogEx(NORMAL, " : hf mfu info k 00112233445566778899AABBCCDDEEFF");
+ PrintAndLogEx(NORMAL, " : hf mfu info k AABBCCDDD");
+ return 0;
+}
+
+static int CmdHF14AMfUInfo(const char *Cmd){
uint8_t authlim = 0xff;
uint8_t data[16] = {0x00};
uint8_t dataLen = 0;
uint8_t authenticationkey[16] = {0x00};
uint8_t *authkeyptr = authenticationkey;
- uint8_t *key;
+ uint8_t *key;
uint8_t pack[4] = {0,0,0,0};
int len = 0;
char tempStr[50];
errors = param_gethex(tempStr, 0, authenticationkey, dataLen);
dataLen /= 2; // handled as bytes from now on
} else {
- PrintAndLog("\nERROR: Key is incorrect length\n");
+ PrintAndLogEx(ERR, "Key has incorrect length\n");
errors = true;
}
cmdp += 2;
cmdp++;
break;
default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
break;
}
TagTypeUL_t tagtype = GetHF14AMfU_Type();
if (tagtype == UL_ERROR) return -1;
- PrintAndLog("\n--- Tag Information ---------");
- PrintAndLog("-------------------------------------------------------------");
+ PrintAndLogEx(NORMAL, "\n--- Tag Information ---------");
+ PrintAndLogEx(NORMAL, "-------------------------------------------------------------");
ul_print_type(tagtype, 6);
- // Swap endianness
+ // Swap endianness
if (swapEndian && hasAuthKey) authkeyptr = SwapEndian64(authenticationkey, dataLen, (dataLen == 16) ? 8 : 4 );
if (!ul_auth_select( &card, tagtype, hasAuthKey, authkeyptr, pack, sizeof(pack))) return -1;
status = ul_read(0, data, sizeof(data));
if ( status == -1 ) {
DropField();
- PrintAndLog("Error: tag didn't answer to READ");
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ");
return status;
} else if (status == 16) {
ul_print_default(data);
uint8_t ulc_conf[16] = {0x00};
status = ul_read(0x28, ulc_conf, sizeof(ulc_conf));
if ( status == -1 ){
- PrintAndLog("Error: tag didn't answer to READ UL-C");
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ UL-C");
DropField();
return status;
- }
+ }
if (status == 16) ulc_print_configuration(ulc_conf);
else locked = true;
status = ul_read(0x2C, ulc_deskey, sizeof(ulc_deskey));
if ( status == -1 ) {
DropField();
- PrintAndLog("Error: tag didn't answer to READ magic");
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ magic");
return status;
}
if (status == 16) ulc_print_3deskey(ulc_deskey);
} else {
DropField();
- // if we called info with key, just return
+ // if we called info with key, just return
if ( hasAuthKey ) return 1;
// also try to diversify default keys.. look into CmdHF14AMfuGenDiverseKeys
- PrintAndLog("Trying some default 3des keys");
+ PrintAndLogEx(INFO, "Trying some default 3des keys");
for (uint8_t i = 0; i < KEYS_3DES_COUNT; ++i ) {
key = default_3des_keys[i];
if (ulc_authentication(key, true)) {
- PrintAndLog("Found default 3des key: ");
+ PrintAndLogEx(SUCCESS, "Found default 3des key: ");
uint8_t keySwap[16];
memcpy(keySwap, SwapEndian64(key,16,8), 16);
ulc_print_3deskey(keySwap);
return 1;
- }
+ }
}
return 1;
}
}
- // do counters and signature first (don't neet auth)
+ // do counters and signature first (don't neet auth)
// ul counters are different than ntag counters
if ((tagtype & (UL_EV1_48 | UL_EV1_128))) {
}
}
- if ((tagtype & (UL_EV1_48 | UL_EV1_128 | NTAG_213 | NTAG_215 | NTAG_216 | NTAG_I2C_1K | NTAG_I2C_2K ))) {
+ if ((tagtype & (UL_EV1_48 | UL_EV1_128 | NTAG_213 | NTAG_215 | NTAG_216 | NTAG_I2C_1K | NTAG_I2C_2K ))) {
uint8_t ulev1_signature[32] = {0x00};
status = ulev1_readSignature( ulev1_signature, sizeof(ulev1_signature));
if ( status == -1 ) {
- PrintAndLog("Error: tag didn't answer to READ SIGNATURE");
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ SIGNATURE");
DropField();
return status;
}
uint8_t version[10] = {0x00};
status = ulev1_getVersion(version, sizeof(version));
if ( status == -1 ) {
- PrintAndLog("Error: tag didn't answer to GETVERSION");
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to GETVERSION");
DropField();
return status;
} else if (status == 10) {
if (startconfigblock){ // if we know where the config block is...
status = ul_read(startconfigblock, ulev1_conf, sizeof(ulev1_conf));
if ( status == -1 ) {
- PrintAndLog("Error: tag didn't answer to READ EV1");
+ PrintAndLogEx(WARNING, "Error: tag didn't answer to READ EV1");
DropField();
return status;
} else if (status == 16) {
// 1-7 = limit. No automatic tries then.
// hasAuthKey, if we was called with key, skip test.
if ( !authlim && !hasAuthKey ) {
- PrintAndLog("\n--- Known EV1/NTAG passwords.");
+ PrintAndLogEx(NORMAL, "\n--- Known EV1/NTAG passwords.");
len = 0;
for (uint8_t i = 0; i < KEYS_PWD_COUNT; ++i ) {
key = default_pwd_pack[i];
len = ulev1_requestAuthentication(key, pack, sizeof(pack));
if (len >= 1) {
- PrintAndLog("Found a default password: %s || Pack: %02X %02X",sprint_hex(key, 4), pack[0], pack[1]);
+ PrintAndLogEx(SUCCESS, "Found a default password: %s || Pack: %02X %02X",sprint_hex(key, 4), pack[0], pack[1]);
break;
} else {
if (!ul_auth_select( &card, tagtype, hasAuthKey, authkeyptr, pack, sizeof(pack))) return -1;
}
}
- if (len < 1) PrintAndLog("password not known");
+ if (len < 1) PrintAndLogEx(WARNING, "password not known");
}
}
DropField();
- if (locked) PrintAndLog("\nTag appears to be locked, try using the key to get more info");
- PrintAndLog("");
+ if (locked) PrintAndLogEx(FAILED, "\nTag appears to be locked, try using the key to get more info");
+ PrintAndLogEx(NORMAL, "");
return 1;
}
//
// Write Single Block
//
-int CmdHF14AMfUWrBl(const char *Cmd){
+static int usage_hf_mfu_wrbl(void) {
+ PrintAndLogEx(NORMAL, "Write a block. It autodetects card type.\n");
+ PrintAndLogEx(NORMAL, "Usage: hf mfu wrbl b <block number> d <data> k <key> l\n");
+ PrintAndLogEx(NORMAL, " Options:");
+ PrintAndLogEx(NORMAL, " b <no> : block to write");
+ PrintAndLogEx(NORMAL, " d <data> : block data - (8 hex symbols)");
+ PrintAndLogEx(NORMAL, " k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLogEx(NORMAL, " l : (optional) swap entered key's endianness");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, " sample : hf mfu wrbl b 0 d 01234567");
+ PrintAndLogEx(NORMAL, " : hf mfu wrbl b 0 d 01234567 k AABBCCDDD\n");
+ return 0;
+}
+
+static int CmdHF14AMfUWrBl(const char *Cmd){
int blockNo = -1;
bool errors = false;
hasPwdKey = true;
break;
}
- // UL-C size key
+ // UL-C size key
keylen = param_gethex(Cmd, cmdp+1, data, 32);
if (!keylen){
memcpy(authenticationkey, data, 16);
hasAuthKey = true;
break;
}
- PrintAndLog("\nERROR: Key is incorrect length\n");
- errors = true;
+ PrintAndLogEx(ERR, "Key has incorrect length\n");
+ errors = true;
break;
case 'b':
case 'B':
blockNo = param_get8(Cmd, cmdp+1);
if (blockNo < 0) {
- PrintAndLog("Wrong block number");
+ PrintAndLogEx(ERR, "Wrong block number");
errors = true;
}
cmdp += 2;
case 'l':
case 'L':
swapEndian = true;
- cmdp++;
+ cmdp++;
break;
case 'd':
case 'D':
if ( param_gethex(Cmd, cmdp+1, blockdata, 8) ) {
- PrintAndLog("Block data must include 8 HEX symbols");
+ PrintAndLogEx(ERR, "Block data must include 8 HEX symbols");
errors = true;
break;
}
cmdp += 2;
break;
default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ PrintAndLogEx(ERR, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
break;
}
maxblockno = UL_MEMORY_ARRAY[idx];
}
if (blockNo > maxblockno){
- PrintAndLog("block number too large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ PrintAndLogEx(WARNING, "block number too large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
return usage_hf_mfu_wrbl();
}
- // Swap endianness
+ // Swap endianness
if (swapEndian && hasAuthKey) authKeyPtr = SwapEndian64(authenticationkey, 16, 8);
if (swapEndian && hasPwdKey) authKeyPtr = SwapEndian64(authenticationkey, 4, 4);
if ( blockNo <= 3)
- PrintAndLog("Special Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
+ PrintAndLogEx(NORMAL, "Special Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
else
- PrintAndLog("Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
+ PrintAndLogEx(NORMAL, "Block: %0d (0x%02X) [ %s]", blockNo, blockNo, sprint_hex(blockdata, 4));
//Send write Block
UsbCommand c = {CMD_MIFAREU_WRITEBL, {blockNo}};
UsbCommand resp;
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
uint8_t isOK = resp.arg[0] & 0xff;
- PrintAndLog("isOk:%02x", isOK);
+ PrintAndLogEx(SUCCESS, "isOk:%02x", isOK);
} else {
- PrintAndLog("Command execute timeout");
+ PrintAndLogEx(ERR, "Command execute timeout");
}
return 0;
}
+
+
//
// Read Single Block
//
-int CmdHF14AMfURdBl(const char *Cmd){
+static int usage_hf_mfu_rdbl(void) {
+ PrintAndLogEx(NORMAL, "Read a block and print. It autodetects card type.\n");
+ PrintAndLogEx(NORMAL, "Usage: hf mfu rdbl b <block number> k <key> l\n");
+ PrintAndLogEx(NORMAL, " Options:");
+ PrintAndLogEx(NORMAL, " b <no> : block to read");
+ PrintAndLogEx(NORMAL, " k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLogEx(NORMAL, " l : (optional) swap entered key's endianness");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, " sample : hf mfu rdbl b 0");
+ PrintAndLogEx(NORMAL, " : hf mfu rdbl b 0 k 00112233445566778899AABBCCDDEEFF");
+ PrintAndLogEx(NORMAL, " : hf mfu rdbl b 0 k AABBCCDDD\n");
+ return 0;
+}
- int blockNo = -1;
+static int CmdHF14AMfURdBl(const char *Cmd){
+
+ int blockNo = -1;
bool errors = false;
bool hasAuthKey = false;
bool hasPwdKey = false;
hasPwdKey = true;
break;
}
- // UL-C size key
+ // UL-C size key
keylen = param_gethex(Cmd, cmdp+1, data, 32);
if (!keylen){
memcpy(authenticationkey, data, 16);
hasAuthKey = true;
break;
}
- PrintAndLog("\nERROR: Key is incorrect length\n");
- errors = true;
+ PrintAndLogEx(ERR, "Key has incorrect length\n");
+ errors = true;
break;
case 'b':
case 'B':
blockNo = param_get8(Cmd, cmdp+1);
if (blockNo < 0) {
- PrintAndLog("Wrong block number");
+ PrintAndLogEx(ERR, "Wrong block number");
errors = true;
}
cmdp += 2;
cmdp++;
break;
default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
break;
}
maxblockno = UL_MEMORY_ARRAY[idx];
}
if (blockNo > maxblockno){
- PrintAndLog("block number to large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
+ PrintAndLogEx(WARNING, "block number to large. Max block is %u/0x%02X \n", maxblockno,maxblockno);
return usage_hf_mfu_rdbl();
}
- // Swap endianness
+ // Swap endianness
if (swapEndian && hasAuthKey) authKeyPtr = SwapEndian64(authenticationkey, 16, 8);
if (swapEndian && hasPwdKey) authKeyPtr = SwapEndian64(authenticationkey, 4, 4);
uint8_t isOK = resp.arg[0] & 0xff;
if (isOK) {
uint8_t *data = resp.d.asBytes;
- PrintAndLog("\n Block# | Data | Ascii");
- PrintAndLog("---------+-------------+------");
- PrintAndLog(" %02d/0x%02X | %s| %.4s\n", blockNo, blockNo, sprint_hex(data, 4), data);
- }
- else {
- PrintAndLog("Failed reading block: (%02x)", isOK);
+ PrintAndLogEx(NORMAL, "\n Block# | Data | Ascii");
+ PrintAndLogEx(NORMAL, "---------+-------------+------");
+ PrintAndLogEx(NORMAL, " %02d/0x%02X | %s| %s\n", blockNo, blockNo, sprint_hex(data, 4), sprint_ascii(data, 4));
+ } else {
+ PrintAndLogEx(ERR, "Failed reading block: (%02x)", isOK);
}
} else {
- PrintAndLog("Command execute time-out");
+ PrintAndLogEx(ERR, "Command execute time-out");
}
return 0;
}
-int usage_hf_mfu_info(void) {
- PrintAndLog("It gathers information about the tag and tries to detect what kind it is.");
- PrintAndLog("Sometimes the tags are locked down, and you may need a key to be able to read the information");
- PrintAndLog("The following tags can be identified:\n");
- PrintAndLog("Ultralight, Ultralight-C, Ultralight EV1, NTAG 203, NTAG 210,");
- PrintAndLog("NTAG 212, NTAG 213, NTAG 215, NTAG 216, NTAG I2C 1K & 2K");
- PrintAndLog("my-d, my-d NFC, my-d move, my-d move NFC\n");
- PrintAndLog("Usage: hf mfu info k <key> l");
- PrintAndLog(" Options : ");
- PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
- PrintAndLog(" l : (optional) swap entered key's endianness");
- PrintAndLog("");
- PrintAndLog(" sample : hf mfu info");
- PrintAndLog(" : hf mfu info k 00112233445566778899AABBCCDDEEFF");
- PrintAndLog(" : hf mfu info k AABBCCDDD");
- return 0;
-}
-
-int usage_hf_mfu_dump(void) {
- PrintAndLog("Reads all pages from Ultralight, Ultralight-C, Ultralight EV1");
- PrintAndLog("NTAG 203, NTAG 210, NTAG 212, NTAG 213, NTAG 215, NTAG 216");
- PrintAndLog("and saves binary dump into the file `filename.bin` or `cardUID.bin`");
- PrintAndLog("It autodetects card type.\n");
- PrintAndLog("Usage: hf mfu dump k <key> l n <filename w/o .bin>");
- PrintAndLog(" Options : ");
- PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
- PrintAndLog(" l : (optional) swap entered key's endianness");
- PrintAndLog(" n <FN > : filename w/o .bin to save the dump as");
- PrintAndLog(" p <Pg > : starting Page number to manually set a page to start the dump at");
- PrintAndLog(" q <qty> : number of Pages to manually set how many pages to dump");
-
- PrintAndLog("");
- PrintAndLog(" sample : hf mfu dump");
- PrintAndLog(" : hf mfu dump n myfile");
- PrintAndLog(" : hf mfu dump k 00112233445566778899AABBCCDDEEFF");
- PrintAndLog(" : hf mfu dump k AABBCCDDD\n");
- return 0;
-}
-
-int usage_hf_mfu_rdbl(void) {
- PrintAndLog("Read a block and print. It autodetects card type.\n");
- PrintAndLog("Usage: hf mfu rdbl b <block number> k <key> l\n");
- PrintAndLog(" Options:");
- PrintAndLog(" b <no> : block to read");
- PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
- PrintAndLog(" l : (optional) swap entered key's endianness");
- PrintAndLog("");
- PrintAndLog(" sample : hf mfu rdbl b 0");
- PrintAndLog(" : hf mfu rdbl b 0 k 00112233445566778899AABBCCDDEEFF");
- PrintAndLog(" : hf mfu rdbl b 0 k AABBCCDDD\n");
- return 0;
-}
-
-int usage_hf_mfu_wrbl(void) {
- PrintAndLog("Write a block. It autodetects card type.\n");
- PrintAndLog("Usage: hf mfu wrbl b <block number> d <data> k <key> l\n");
- PrintAndLog(" Options:");
- PrintAndLog(" b <no> : block to write");
- PrintAndLog(" d <data> : block data - (8 hex symbols)");
- PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
- PrintAndLog(" l : (optional) swap entered key's endianness");
- PrintAndLog("");
- PrintAndLog(" sample : hf mfu wrbl b 0 d 01234567");
- PrintAndLog(" : hf mfu wrbl b 0 d 01234567 k AABBCCDDD\n");
- return 0;
-}
//
// Mifare Ultralight / Ultralight-C / Ultralight-EV1
// Read and Dump Card Contents, using auto detection of tag size.
-int CmdHF14AMfUDump(const char *Cmd){
+static int usage_hf_mfu_dump(void) {
+ PrintAndLogEx(NORMAL, "Reads all pages from Ultralight, Ultralight-C, Ultralight EV1");
+ PrintAndLogEx(NORMAL, "NTAG 203, NTAG 210, NTAG 212, NTAG 213, NTAG 215, NTAG 216");
+ PrintAndLogEx(NORMAL, "and saves binary dump into the file `filename.bin` or `cardUID.bin`");
+ PrintAndLogEx(NORMAL, "It autodetects card type.\n");
+ PrintAndLogEx(NORMAL, "Usage: hf mfu dump k <key> l n <filename w/o .bin>");
+ PrintAndLogEx(NORMAL, " Options : ");
+ PrintAndLogEx(NORMAL, " k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
+ PrintAndLogEx(NORMAL, " l : (optional) swap entered key's endianness");
+ PrintAndLogEx(NORMAL, " n <FN > : filename w/o .bin to save the dump as");
+ PrintAndLogEx(NORMAL, " p <Pg > : starting Page number to manually set a page to start the dump at");
+ PrintAndLogEx(NORMAL, " q <qty> : number of Pages to manually set how many pages to dump");
+
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, " sample : hf mfu dump");
+ PrintAndLogEx(NORMAL, " : hf mfu dump n myfile");
+ PrintAndLogEx(NORMAL, " : hf mfu dump k 00112233445566778899AABBCCDDEEFF");
+ PrintAndLogEx(NORMAL, " : hf mfu dump k AABBCCDDD\n");
+ return 0;
+}
+
+static int CmdHF14AMfUDump(const char *Cmd){
FILE *fout;
char filename[FILE_PATH_SIZE] = {0x00};
uint8_t dataLen = 0;
uint8_t cmdp = 0;
uint8_t authenticationkey[16] = {0x00};
- uint8_t *authKeyPtr = authenticationkey;
+ uint8_t *authKeyPtr = authenticationkey;
size_t fileNlen = 0;
bool errors = false;
bool swapEndian = false;
errors = param_gethex(tempStr, 0, authenticationkey, dataLen);
dataLen /= 2;
} else {
- PrintAndLog("\nERROR: Key is incorrect length\n");
+ PrintAndLogEx(ERR, "Key has incorrect length\n");
errors = true;
}
cmdp += 2;
case 'n':
case 'N':
fileNlen = param_getstr(Cmd, cmdp+1, filename, sizeof(filename));
- if (!fileNlen) errors = true;
+ if (!fileNlen) errors = true;
if (fileNlen > FILE_PATH_SIZE-5) fileNlen = FILE_PATH_SIZE-5;
cmdp += 2;
break;
manualPages = true;
break;
default:
- PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
errors = true;
break;
}
//Validations
if(errors) return usage_hf_mfu_dump();
- if (swapEndian && hasAuthKey)
+ if (swapEndian && hasAuthKey)
authKeyPtr = SwapEndian64(authenticationkey, dataLen, (dataLen == 16) ? 8 : 4);
TagTypeUL_t tagtype = GetHF14AMfU_Type();
Pages = UL_MEMORY_ARRAY[idx]+1; //add one as maxblks starts at 0
ul_print_type(tagtype, 0);
- PrintAndLog("Reading tag memory...");
+ PrintAndLogEx(NORMAL, "Reading tag memory...");
UsbCommand c = {CMD_MIFAREU_READCARD, {startPage,Pages}};
if ( hasAuthKey ) {
if (tagtype & UL_C)
SendCommand(&c);
UsbCommand resp;
if (!WaitForResponseTimeout(CMD_ACK, &resp,1500)) {
- PrintAndLog("Command execute time-out");
+ PrintAndLogEx(ERR, "Command execute time-out");
return 1;
}
if (resp.arg[0] != 1) {
- PrintAndLog("Failed reading block: (%02x)", i);
+ PrintAndLogEx(ERR, "Failed reading block: (%02x)", i);
return 1;
}
uint32_t startindex = resp.arg[2];
uint32_t bufferSize = resp.arg[1];
if (bufferSize > sizeof(data)) {
- PrintAndLog("Data exceeded Buffer size!");
+ PrintAndLogEx(FAILED, "Data exceeded Buffer size!");
bufferSize = sizeof(data);
}
GetFromBigBuf(data, bufferSize, startindex, NULL, -1, false);
if (tagtype & UL_C){ //add 4 pages
memcpy(data + Pages*4, authKeyPtr, dataLen);
- Pages += dataLen/4;
+ Pages += dataLen/4;
} else { // 2nd page from end
memcpy(data + (Pages*4) - 8, authenticationkey, dataLen);
}
}
- PrintAndLog("\n Block# | Data |lck| Ascii");
- PrintAndLog("---------+-------------+---+------");
+ PrintAndLogEx(NORMAL, "\n Block# | Data |lck| Ascii");
+ PrintAndLogEx(NORMAL, "---------+-------------+---+------");
for (i = 0; i < Pages; ++i) {
if ( i < 3 ) {
- PrintAndLog("%3d/0x%02X | %s| | ", i+startPage, i+startPage, sprint_hex(data + i * 4, 4));
+ PrintAndLogEx(NORMAL, "%3d/0x%02X | %s| | ", i+startPage, i+startPage, sprint_hex(data + i * 4, 4));
continue;
}
switch(i){
case 20:
case 21:
case 22:
- case 23: tmplockbit = bit2[5]; break;
+ case 23: tmplockbit = bit2[5]; break;
case 24:
case 25:
case 26:
case 32:
case 33:
case 34:
- case 35: tmplockbit = bit2[1]; break;
+ case 35: tmplockbit = bit2[1]; break;
case 36:
case 37:
case 38:
- case 39: tmplockbit = bit2[0]; break;
+ case 39: tmplockbit = bit2[0]; break;
case 40: tmplockbit = bit2[12]; break;
case 41: tmplockbit = bit2[11]; break;
case 42: tmplockbit = bit2[10]; break; //auth0
memcpy(cleanASCII, data+i*4, 4);
clean_ascii(cleanASCII, 4);
- PrintAndLog("%3d/0x%02X | %s| %d | %.4s", i+startPage, i+startPage, sprint_hex(data + i * 4, 4), tmplockbit, cleanASCII);
+ PrintAndLogEx(NORMAL, "%3d/0x%02X | %s| %d | %.4s", i+startPage, i+startPage, sprint_hex(data + i * 4, 4), tmplockbit, cleanASCII);
}
- PrintAndLog("---------------------------------");
+ PrintAndLogEx(NORMAL, "---------------------------------");
// user supplied filename?
if (fileNlen < 1) {
sprintf(fnameptr + fileNlen,".bin");
}
- if ((fout = fopen(filename,"wb")) == NULL) {
- PrintAndLog("Could not create file name %s", filename);
+ if ((fout = fopen(filename,"wb")) == NULL) {
+ PrintAndLogEx(NORMAL, "Could not create file name %s", filename);
return 1;
}
fwrite( data, 1, Pages*4, fout );
fclose(fout);
-
- PrintAndLog("Dumped %d pages, wrote %d bytes to %s", Pages, Pages*4, filename);
+
+ PrintAndLogEx(SUCCESS, "Dumped %d pages, wrote %d bytes to %s", Pages, Pages*4, filename);
return 0;
}
//
// Ultralight C Authentication Demo {currently uses hard-coded key}
//
-int CmdHF14AMfucAuth(const char *Cmd){
+static int CmdHF14AMfucAuth(const char *Cmd){
uint8_t keyNo = 3;
bool errors = false;
//Change key to user defined one
if (cmdp == 'k' || cmdp == 'K'){
keyNo = param_get8(Cmd, 1);
- if(keyNo > KEYS_3DES_COUNT-1)
+ if(keyNo > KEYS_3DES_COUNT-1)
errors = true;
}
if (cmdp == 'h' || cmdp == 'H')
errors = true;
-
+
if (errors) {
- PrintAndLog("Usage: hf mfu cauth k <key number>");
- PrintAndLog(" 0 (default): 3DES standard key");
- PrintAndLog(" 1 : all 0x00 key");
- PrintAndLog(" 2 : 0x00-0x0F key");
- PrintAndLog(" 3 : nfc key");
- PrintAndLog(" 4 : all 0x01 key");
- PrintAndLog(" 5 : all 0xff key");
- PrintAndLog(" 6 : 0x00-0xFF key");
- PrintAndLog("\n sample : hf mfu cauth k");
- PrintAndLog(" : hf mfu cauth k 3");
+ PrintAndLogEx(NORMAL, "Usage: hf mfu cauth k <key number>");
+ PrintAndLogEx(NORMAL, " 0 (default): 3DES standard key");
+ PrintAndLogEx(NORMAL, " 1 : all 0x00 key");
+ PrintAndLogEx(NORMAL, " 2 : 0x00-0x0F key");
+ PrintAndLogEx(NORMAL, " 3 : nfc key");
+ PrintAndLogEx(NORMAL, " 4 : all 0x01 key");
+ PrintAndLogEx(NORMAL, " 5 : all 0xff key");
+ PrintAndLogEx(NORMAL, " 6 : 0x00-0xFF key");
+ PrintAndLogEx(NORMAL, "\n sample : hf mfu cauth k");
+ PrintAndLogEx(NORMAL, " : hf mfu cauth k 3");
return 0;
- }
+ }
uint8_t *key = default_3des_keys[keyNo];
if (ulc_authentication(key, true))
- PrintAndLog("Authentication successful. 3des key: %s",sprint_hex(key, 16));
+ PrintAndLogEx(SUCCESS, "Authentication successful. 3des key: %s",sprint_hex(key, 16));
else
- PrintAndLog("Authentication failed");
-
+ PrintAndLogEx(WARNING, "Authentication failed");
+
return 0;
}
/**
-A test function to validate that the polarssl-function works the same
-was as the openssl-implementation.
-Commented out, since it requires openssl
+A test function to validate that the polarssl-function works the same
+was as the openssl-implementation.
+Commented out, since it requires openssl
int CmdTestDES(const char * cmd)
{
- uint8_t key[16] = {0x00};
-
- memcpy(key,key3_3des_data,16);
+ uint8_t key[16] = {0x00};
+
+ memcpy(key,key3_3des_data,16);
DES_cblock RndA, RndB;
- PrintAndLog("----------OpenSSL DES implementation----------");
+ PrintAndLogEx(NORMAL, "----------OpenSSL DES implementation----------");
{
uint8_t e_RndB[8] = {0x00};
unsigned char RndARndB[16] = {0x00};
DES_key_schedule ks1,ks2;
DES_cblock key1,key2;
- memcpy(key,key3_3des_data,16);
+ memcpy(key,key3_3des_data,16);
memcpy(key1,key,8);
memcpy(key2,key+8,8);
DES_set_key((DES_cblock *)key2,&ks2);
DES_random_key(&RndA);
- PrintAndLog(" RndA:%s",sprint_hex(RndA, 8));
- PrintAndLog(" e_RndB:%s",sprint_hex(e_RndB, 8));
+ PrintAndLogEx(NORMAL, " RndA:%s",sprint_hex(RndA, 8));
+ PrintAndLogEx(NORMAL, " e_RndB:%s",sprint_hex(e_RndB, 8));
//void DES_ede2_cbc_encrypt(const unsigned char *input,
// unsigned char *output, long length, DES_key_schedule *ks1,
// DES_key_schedule *ks2, DES_cblock *ivec, int enc);
DES_ede2_cbc_encrypt(e_RndB,RndB,sizeof(e_RndB),&ks1,&ks2,&iv,0);
- PrintAndLog(" RndB:%s",sprint_hex(RndB, 8));
+ PrintAndLogEx(NORMAL, " RndB:%s",sprint_hex(RndB, 8));
rol(RndB,8);
memcpy(RndARndB,RndA,8);
memcpy(RndARndB+8,RndB,8);
- PrintAndLog(" RA+B:%s",sprint_hex(RndARndB, 16));
+ PrintAndLogEx(NORMAL, " RA+B:%s",sprint_hex(RndARndB, 16));
DES_ede2_cbc_encrypt(RndARndB,RndARndB,sizeof(RndARndB),&ks1,&ks2,&e_RndB,1);
- PrintAndLog("enc(RA+B):%s",sprint_hex(RndARndB, 16));
+ PrintAndLogEx(NORMAL, "enc(RA+B):%s",sprint_hex(RndARndB, 16));
}
- PrintAndLog("----------PolarSSL implementation----------");
+ PrintAndLogEx(NORMAL, "----------PolarSSL implementation----------");
{
uint8_t random_a[8] = { 0 };
uint8_t enc_random_a[8] = { 0 };
uint8_t output[8] = { 0 };
uint8_t iv[8] = { 0 };
- PrintAndLog(" RndA :%s",sprint_hex(random_a, 8));
- PrintAndLog(" e_RndB:%s",sprint_hex(enc_random_b, 8));
+ PrintAndLogEx(NORMAL, " RndA :%s",sprint_hex(random_a, 8));
+ PrintAndLogEx(NORMAL, " e_RndB:%s",sprint_hex(enc_random_b, 8));
des3_set2key_dec(&ctx, key);
, random_b // unsigned char *output
);
- PrintAndLog(" RndB:%s",sprint_hex(random_b, 8));
+ PrintAndLogEx(NORMAL, " RndB:%s",sprint_hex(random_b, 8));
rol(random_b,8);
memcpy(random_a_and_b ,random_a,8);
memcpy(random_a_and_b+8,random_b,8);
-
- PrintAndLog(" RA+B:%s",sprint_hex(random_a_and_b, 16));
+
+ PrintAndLogEx(NORMAL, " RA+B:%s",sprint_hex(random_a_and_b, 16));
des3_set2key_enc(&ctx, key);
, random_a_and_b // unsigned char *output
);
- PrintAndLog("enc(RA+B):%s",sprint_hex(random_a_and_b, 16));
+ PrintAndLogEx(NORMAL, "enc(RA+B):%s",sprint_hex(random_a_and_b, 16));
}
- return 0;
+ return 0;
}
**/
-//
+//
// Mifare Ultralight C - Set password
//
-int CmdHF14AMfucSetPwd(const char *Cmd){
+static int CmdHF14AMfucSetPwd(const char *Cmd){
uint8_t pwd[16] = {0x00};
-
+
char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog
("Usage: hf mfu setpwd <password (32 hex symbols)>");
- PrintAndLog(" [password] - (32 hex symbols)");
- PrintAndLog("");
- PrintAndLog("sample: hf mfu setpwd 000102030405060708090a0b0c0d0e0f");
- PrintAndLog("");
+
+ if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLog
Ex(NORMAL, "Usage: hf mfu setpwd <password (32 hex symbols)>");
+ PrintAndLogEx(NORMAL, " [password] - (32 hex symbols)");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "sample: hf mfu setpwd 000102030405060708090a0b0c0d0e0f");
+ PrintAndLogEx(NORMAL, "");
return 0;
}
-
+
if (param_gethex(Cmd, 0, pwd, 32)) {
- PrintAndLog("Password must include 32 HEX symbols");
+ PrintAndLogEx(WARNING, "Password must include 32 HEX symbols");
return 1;
}
-
- UsbCommand c = {CMD_MIFAREUC_SETPWD};
+
+ UsbCommand c = {CMD_MIFAREUC_SETPWD};
memcpy( c.d.asBytes, pwd, 16);
clearCommandBuffer();
SendCommand(&c);
UsbCommand resp;
-
+
if (WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
if ( (resp.arg[0] & 0xff) == 1)
- PrintAndLog("Ultralight-C new password: %s", sprint_hex(pwd,16));
+ PrintAndLogEx(INFO, "Ultralight-C new password: %s", sprint_hex(pwd,16));
else{
- PrintAndLog("Failed writing at block %d", resp.arg[1] & 0xff);
+ PrintAndLogEx(ERR, "Failed writing at block %d", resp.arg[1] & 0xff);
return 1;
}
}
else {
- PrintAndLog("command execution time out");
+ PrintAndLogEx(ERR, "command execution time out");
return 1;
}
-
+
return 0;
}
//
// Magic UL / UL-C tags - Set UID
//
-int CmdHF14AMfucSetUid(const char *Cmd){
+static int CmdHF14AMfucSetUid(const char *Cmd){
UsbCommand c;
UsbCommand resp;
uint8_t uid[7] = {0x00};
char cmdp = param_getchar(Cmd, 0);
-
- if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
- PrintAndLog("Usage: hf mfu setuid <uid (14 hex symbols)>");
- PrintAndLog(" [uid] - (14 hex symbols)");
- PrintAndLog("\nThis only works for Magic Ultralight tags.");
- PrintAndLog("");
- PrintAndLog("sample: hf mfu setuid 11223344556677");
- PrintAndLog("");
+
+ if (strlen(Cmd) == 0 || cmdp == 'h' || cmdp == 'H') {
+ PrintAndLogEx(NORMAL, "Usage: hf mfu setuid <uid (14 hex symbols)>");
+ PrintAndLogEx(NORMAL, " [uid] - (14 hex symbols)");
+ PrintAndLogEx(NORMAL, "\nThis only works for Magic Ultralight tags.");
+ PrintAndLogEx(NORMAL, "");
+ PrintAndLogEx(NORMAL, "sample: hf mfu setuid 11223344556677");
+ PrintAndLogEx(NORMAL, "");
return 0;
}
-
+
if (param_gethex(Cmd, 0, uid, 14)) {
- PrintAndLog("UID must include 14 HEX symbols");
+ PrintAndLogEx(WARNING, "UID must include 14 HEX symbols");
return 1;
}
- // read block2.
+ // read block2.
c.cmd = CMD_MIFAREU_READBL;
c.arg[0] = 2;
clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- PrintAndLog("Command execute timeout");
+ PrintAndLogEx(WARNING, "Command execute timeout");
return 2;
}
-
+
// save old block2.
uint8_t oldblock2[4] = {0x00};
memcpy(resp.d.asBytes, oldblock2, 4);
-
+
// block 0.
c.cmd = CMD_MIFAREU_WRITEBL;
c.arg[0] = 0;
clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
- PrintAndLog("Command execute timeout");
+ PrintAndLogEx(WARNING, "Command execute timeout");
return 3;
}
-
+
// block 1.
c.arg[0] = 1;
c.d.asBytes[0] = uid[3];
clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
- PrintAndLog("Command execute timeout");
+ PrintAndLogEx(WARNING, "Command execute timeout");
return 4;
}
clearCommandBuffer();
SendCommand(&c);
if (!WaitForResponseTimeout(CMD_ACK,&resp,1500) ) {
- PrintAndLog("Command execute timeout");
+ PrintAndLogEx(WARNING, "Command execute timeout");
return 5;
}
-
+
return 0;
}
-int CmdHF14AMfuGenDiverseKeys(const char *Cmd){
+static int CmdHF14AMfuGenDiverseKeys(const char *Cmd){
uint8_t iv[8] = { 0x00 };
uint8_t block = 0x07;
uint8_t mifarekeyB[] = { 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5 };
uint8_t dkeyA[8] = { 0x00 };
uint8_t dkeyB[8] = { 0x00 };
-
+
uint8_t masterkey[] = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xaa,0xbb,0xcc,0xdd,0xee,0xff };
-
+
uint8_t mix[8] = { 0x00 };
uint8_t divkey[8] = { 0x00 };
, divkey // output
);
- PrintAndLog("3DES version");
- PrintAndLog("Masterkey :\t %s", sprint_hex(masterkey,sizeof(masterkey)));
- PrintAndLog("UID :\t %s", sprint_hex(uid, sizeof(uid)));
- PrintAndLog("Sector :\t %0d", block);
- PrintAndLog("Mifare key :\t %s", sprint_hex(mifarekeyA, sizeof(mifarekeyA)));
- PrintAndLog("Message :\t %s", sprint_hex(mix, sizeof(mix)));
- PrintAndLog("Diversified key: %s", sprint_hex(divkey+1, 6));
-
- PrintAndLog("\n DES version");
+ PrintAndLogEx(NORMAL, "-- 3DES version");
+ PrintAndLogEx(NORMAL, "Masterkey :\t %s", sprint_hex(masterkey,sizeof(masterkey)));
+ PrintAndLogEx(NORMAL, "UID :\t %s", sprint_hex(uid, sizeof(uid)));
+ PrintAndLogEx(NORMAL, "Block :\t %0d", block);
+ PrintAndLogEx(NORMAL, "Mifare key :\t %s", sprint_hex(mifarekeyA, sizeof(mifarekeyA)));
+ PrintAndLogEx(NORMAL, "Message :\t %s", sprint_hex(mix, sizeof(mix)));
+ PrintAndLogEx(NORMAL, "Diversified key: %s", sprint_hex(divkey+1, 6));
for (int i=0; i < sizeof(mifarekeyA); ++i){
dkeyA[i] = (mifarekeyA[i] << 1) & 0xff;
dkeyA[6] |= ((mifarekeyA[i] >> 7) & 1) << (i+1);
}
-
+
for (int i=0; i < sizeof(mifarekeyB); ++i){
dkeyB[1] |= ((mifarekeyB[i] >> 7) & 1) << (i+1);
dkeyB[2+i] = (mifarekeyB[i] << 1) & 0xff;
}
-
+
uint8_t zeros[8] = {0x00};
uint8_t newpwd[8] = {0x00};
uint8_t dmkey[24] = {0x00};
, zeros // input
, newpwd // output
);
-
- PrintAndLog("Mifare dkeyA :\t %s", sprint_hex(dkeyA, sizeof(dkeyA)));
- PrintAndLog("Mifare dkeyB :\t %s", sprint_hex(dkeyB, sizeof(dkeyB)));
- PrintAndLog("Mifare ABA :\t %s", sprint_hex(dmkey, sizeof(dmkey)));
- PrintAndLog("Mifare Pwd :\t %s", sprint_hex(newpwd, sizeof(newpwd)));
-
+
+ PrintAndLogEx(NORMAL, "\n-- DES version");
+ PrintAndLogEx(NORMAL, "Mifare dkeyA :\t %s", sprint_hex(dkeyA, sizeof(dkeyA)));
+ PrintAndLogEx(NORMAL, "Mifare dkeyB :\t %s", sprint_hex(dkeyB, sizeof(dkeyB)));
+ PrintAndLogEx(NORMAL, "Mifare ABA :\t %s", sprint_hex(dmkey, sizeof(dmkey)));
+ PrintAndLogEx(NORMAL, "Mifare Pwd :\t %s", sprint_hex(newpwd, sizeof(newpwd)));
+
return 0;
}
// static uint8_t * diversify_key(uint8_t * key){
-
+
// for(int i=0; i<16; i++){
// if(i<=6) key[i]^=cuid[i];
// if(i>6) key[i]^=cuid[i%7];
// static void GenerateUIDe( uint8_t *uid, uint8_t len){
// for (int i=0; i<len; ++i){
-
+
// }
// return;
// }
//------------------------------------
// Menu Stuff
//------------------------------------
+static int CmdHelp(const char *Cmd);
+
static command_t CommandTable[] =
{
- {"help", CmdHelp, 1, "This help"},
- {"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},
- {"info", CmdHF14AMfUInfo, 0, "Tag information"},
- {"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C / NTAG tag to binary file"},
- {"rdbl", CmdHF14AMfURdBl, 0, "Read block"},
- {"wrbl", CmdHF14AMfUWrBl, 0, "Write block"},
- {"cauth", CmdHF14AMfucAuth, 0, "Authentication - Ultralight C"},
- {"setpwd", CmdHF14AMfucSetPwd, 1, "Set 3des password - Ultralight-C"},
- {"setuid", CmdHF14AMfucSetUid, 1, "Set UID - MAGIC tags only"},
- {"gen", CmdHF14AMfuGenDiverseKeys , 1, "Generate 3des mifare diversified keys"},
+ {"help", CmdHelp, 1, "This help"},
+ {"dbg", CmdHF14AMfDbg, 0, "Set default debug mode"},
+ {"info", CmdHF14AMfUInfo, 0, "Tag information"},
+ {"dump", CmdHF14AMfUDump, 0, "Dump Ultralight / Ultralight-C / NTAG tag to binary file"},
+ {"rdbl", CmdHF14AMfURdBl, 0, "Read block"},
+ {"wrbl", CmdHF14AMfUWrBl, 0, "Write block"},
+ {"cauth", CmdHF14AMfucAuth, 0, "Authentication - Ultralight C"},
+ {"setpwd", CmdHF14AMfucSetPwd, 0, "Set 3des password - Ultralight-C"},
+ {"setuid", CmdHF14AMfucSetUid, 0, "Set UID - MAGIC tags only"},
+ {"gen", CmdHF14AMfuGenDiverseKeys, 1, "Generate 3des mifare diversified keys"},
{NULL, NULL, 0, NULL}
};
return 0;
}
-int CmdHelp(const char *Cmd){
+static int CmdHelp(const char *Cmd){
CmdsHelp(CommandTable);
return 0;
}
projects / proxmark3-svn / commitdiff