all: $(OBJS)
+.DELETE_ON_ERROR:
+
$(OBJDIR)/fpga_all.o: $(OBJDIR)/fpga_all.bit.z
$(OBJCOPY) -O elf32-littlearm -I binary -B arm --prefix-sections=fpga_all_bit $^ $@
--- /dev/null
+//-----------------------------------------------------------------------------
+// Jonathan Westhues, April 2006
+// iZsh <izsh at fail0verflow.com>, 2014
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Routines to load the FPGA image, and then to configure the FPGA's major
+// mode once it is configured.
+//-----------------------------------------------------------------------------
+
+void FpgaSendCommand(uint16_t cmd, uint16_t v);
+void FpgaWriteConfWord(uint8_t v);
+void FpgaDownloadAndGo(int bitstream_version);
+void FpgaGatherVersion(int bitstream_version, char *dst, int len);
+void FpgaSetupSsc(void);
+void SetupSpi(int mode);
+bool FpgaSetupSscDma(uint8_t *buf, int len);
+#define FpgaDisableSscDma(void) AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;
+#define FpgaEnableSscDma(void) AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN;
+void SetAdcMuxFor(uint32_t whichGpio);
+
+// definitions for multiple FPGA config files support
+#define FPGA_BITSTREAM_MAX 2 // the total number of FPGA bitstreams (configs)
+#define FPGA_BITSTREAM_ERR 0
+#define FPGA_BITSTREAM_LF 1
+#define FPGA_BITSTREAM_HF 2
+
+
+// Definitions for the FPGA commands.
+#define FPGA_CMD_SET_CONFREG (1<<12)
+#define FPGA_CMD_SET_DIVISOR (2<<12)
+#define FPGA_CMD_SET_USER_BYTE1 (3<<12)
+// Definitions for the FPGA configuration word.
+// LF
+#define FPGA_MAJOR_MODE_LF_ADC (0<<5)
+#define FPGA_MAJOR_MODE_LF_EDGE_DETECT (1<<5)
+#define FPGA_MAJOR_MODE_LF_PASSTHRU (2<<5)
+// HF
+#define FPGA_MAJOR_MODE_HF_READER_TX (0<<5)
+#define FPGA_MAJOR_MODE_HF_READER_RX_XCORR (1<<5)
+#define FPGA_MAJOR_MODE_HF_SIMULATOR (2<<5)
+#define FPGA_MAJOR_MODE_HF_ISO14443A (3<<5)
+// BOTH
+#define FPGA_MAJOR_MODE_OFF (7<<5)
+// Options for LF_ADC
+#define FPGA_LF_ADC_READER_FIELD (1<<0)
+// Options for LF_EDGE_DETECT
+#define FPGA_CMD_SET_EDGE_DETECT_THRESHOLD FPGA_CMD_SET_USER_BYTE1
+#define FPGA_LF_EDGE_DETECT_READER_FIELD (1<<0)
+#define FPGA_LF_EDGE_DETECT_TOGGLE_MODE (1<<1)
+// Options for the HF reader, tx to tag
+#define FPGA_HF_READER_TX_SHALLOW_MOD (1<<0)
+// Options for the HF reader, correlating against rx from tag
+#define FPGA_HF_READER_RX_XCORR_848_KHZ (1<<0)
+#define FPGA_HF_READER_RX_XCORR_SNOOP (1<<1)
+#define FPGA_HF_READER_RX_XCORR_QUARTER_FREQ (1<<2)
+// Options for the HF simulated tag, how to modulate
+#define FPGA_HF_SIMULATOR_NO_MODULATION (0<<0)
+#define FPGA_HF_SIMULATOR_MODULATE_BPSK (1<<0)
+#define FPGA_HF_SIMULATOR_MODULATE_212K (2<<0)
+#define FPGA_HF_SIMULATOR_MODULATE_424K (4<<0)
+#define FPGA_HF_SIMULATOR_MODULATE_424K_8BIT 0x5//101
+
+// Options for ISO14443A
+#define FPGA_HF_ISO14443A_SNIFFER (0<<0)
+#define FPGA_HF_ISO14443A_TAGSIM_LISTEN (1<<0)
+#define FPGA_HF_ISO14443A_TAGSIM_MOD (2<<0)
+#define FPGA_HF_ISO14443A_READER_LISTEN (3<<0)
+#define FPGA_HF_ISO14443A_READER_MOD (4<<0)
--- /dev/null
+//-----------------------------------------------------------------------------
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Compression tool for FPGA config files. Compress several *.bit files at
+// compile time. Decompression is done at run time (see fpgaloader.c).
+// This uses the zlib library tuned to this specific case. The small file sizes
+// allow to use "insane" parameters for optimum compression ratio.
+//-----------------------------------------------------------------------------
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include "zlib.h"
+
+#define MAX(a,b) ((a)>(b)?(a):(b))
+
+// zlib configuration
+#define COMPRESS_LEVEL 9 // use best possible compression
+#define COMPRESS_WINDOW_BITS 15 // default = max = 15 for a window of 2^15 = 32KBytes
+#define COMPRESS_MEM_LEVEL 9 // determines the amount of memory allocated during compression. Default = 8.
+/* COMPRESS_STRATEGY can be
+ Z_DEFAULT_STRATEGY (the default),
+ Z_FILTERED (more huffmann, less string matching),
+ Z_HUFFMAN_ONLY (huffman only, no string matching)
+ Z_RLE (distances limited to one)
+ Z_FIXED (prevents the use of dynamic Huffman codes)
+*/
+#define COMPRESS_STRATEGY Z_DEFAULT_STRATEGY
+// zlib tuning parameters:
+#define COMPRESS_GOOD_LENGTH 258
+#define COMPRESS_MAX_LAZY 258
+#define COMPRESS_MAX_NICE_LENGTH 258
+#define COMPRESS_MAX_CHAIN 8192
+
+#define FPGA_INTERLEAVE_SIZE 288 // (the FPGA's internal config frame size is 288 bits. Interleaving with 288 bytes should give best compression)
+#define FPGA_CONFIG_SIZE 42336 // our current fpga_[lh]f.bit files are 42175 bytes. Rounded up to next multiple of FPGA_INTERLEAVE_SIZE
+
+static void usage(void)
+{
+ fprintf(stderr, "Usage: fpga_compress <infile1> <infile2> ... <infile_n> <outfile>\n");
+ fprintf(stderr, " Combine n FPGA bitstream files and compress them into one.\n\n");
+ fprintf(stderr, " fpga_compress -d <infile> <outfile>");
+ fprintf(stderr, " Decompress <infile>. Write result to <outfile>");
+}
+
+
+static voidpf fpga_deflate_malloc(voidpf opaque, uInt items, uInt size)
+{
+ return malloc(items*size);
+}
+
+
+static void fpga_deflate_free(voidpf opaque, voidpf address)
+{
+ return free(address);
+}
+
+
+static bool all_feof(FILE *infile[], uint8_t num_infiles)
+{
+ for (uint16_t i = 0; i < num_infiles; i++) {
+ if (!feof(infile[i])) {
+ return false;
+ }
+ }
+
+ return true;
+}
+
+
+int zlib_compress(FILE *infile[], uint8_t num_infiles, FILE *outfile)
+{
+ uint8_t *fpga_config;
+ uint32_t i;
+ int ret;
+ uint8_t c;
+ z_stream compressed_fpga_stream;
+
+ fpga_config = malloc(num_infiles * FPGA_CONFIG_SIZE);
+
+ // read the input files. Interleave them into fpga_config[]
+ i = 0;
+ do {
+
+ if (i >= num_infiles * FPGA_CONFIG_SIZE) {
+ fprintf(stderr, "Input files too big (total > %lu bytes). These are probably not PM3 FPGA config files.\n", num_infiles*FPGA_CONFIG_SIZE);
+ for(uint16_t j = 0; j < num_infiles; j++) {
+ fclose(infile[j]);
+ }
+ return(EXIT_FAILURE);
+ }
+
+ for(uint16_t j = 0; j < num_infiles; j++) {
+ for(uint16_t k = 0; k < FPGA_INTERLEAVE_SIZE; k++) {
+ c = fgetc(infile[j]);
+ if (!feof(infile[j])) {
+ fpga_config[i++] = c;
+ } else if (num_infiles > 1) {
+ fpga_config[i++] = '\0';
+ }
+ }
+ }
+
+ } while (!all_feof(infile, num_infiles));
+
+ // initialize zlib structures
+ compressed_fpga_stream.next_in = fpga_config;
+ compressed_fpga_stream.avail_in = i;
+ compressed_fpga_stream.zalloc = fpga_deflate_malloc;
+ compressed_fpga_stream.zfree = fpga_deflate_free;
+
+ ret = deflateInit2(&compressed_fpga_stream,
+ COMPRESS_LEVEL,
+ Z_DEFLATED,
+ COMPRESS_WINDOW_BITS,
+ COMPRESS_MEM_LEVEL,
+ COMPRESS_STRATEGY);
+
+ // estimate the size of the compressed output
+ unsigned int outsize_max = deflateBound(&compressed_fpga_stream, compressed_fpga_stream.avail_in);
+ uint8_t *outbuf = malloc(outsize_max);
+ compressed_fpga_stream.next_out = outbuf;
+ compressed_fpga_stream.avail_out = outsize_max;
+
+ if (ret == Z_OK) {
+ ret = deflateTune(&compressed_fpga_stream,
+ COMPRESS_GOOD_LENGTH,
+ COMPRESS_MAX_LAZY,
+ COMPRESS_MAX_NICE_LENGTH,
+ COMPRESS_MAX_CHAIN);
+ }
+
+ if (ret == Z_OK) {
+ ret = deflate(&compressed_fpga_stream, Z_FINISH);
+ }
+
+ fprintf(stderr, "compressed %lu input bytes to %lu output bytes\n", i, compressed_fpga_stream.total_out);
+
+ if (ret != Z_STREAM_END) {
+ fprintf(stderr, "Error in deflate(): %d %s\n", ret, compressed_fpga_stream.msg);
+ free(outbuf);
+ deflateEnd(&compressed_fpga_stream);
+ for(uint16_t j = 0; j < num_infiles; j++) {
+ fclose(infile[j]);
+ }
+ fclose(outfile);
+ free(infile);
+ free(fpga_config);
+ return(EXIT_FAILURE);
+ }
+
+ for (i = 0; i < compressed_fpga_stream.total_out; i++) {
+ fputc(outbuf[i], outfile);
+ }
+
+ free(outbuf);
+ deflateEnd(&compressed_fpga_stream);
+ for(uint16_t j = 0; j < num_infiles; j++) {
+ fclose(infile[j]);
+ }
+ fclose(outfile);
+ free(infile);
+ free(fpga_config);
+
+ return(EXIT_SUCCESS);
+
+}
+
+
+int zlib_decompress(FILE *infile, FILE *outfile)
+{
+ #define DECOMPRESS_BUF_SIZE 1024
+ uint8_t outbuf[DECOMPRESS_BUF_SIZE];
+ uint8_t inbuf[DECOMPRESS_BUF_SIZE];
+ int ret;
+
+ z_stream compressed_fpga_stream;
+
+ // initialize zlib structures
+ compressed_fpga_stream.next_in = inbuf;
+ compressed_fpga_stream.avail_in = 0;
+ compressed_fpga_stream.next_out = outbuf;
+ compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE;
+ compressed_fpga_stream.zalloc = fpga_deflate_malloc;
+ compressed_fpga_stream.zfree = fpga_deflate_free;
+
+ ret = inflateInit2(&compressed_fpga_stream, 0);
+
+ do {
+ if (compressed_fpga_stream.avail_in == 0) {
+ compressed_fpga_stream.next_in = inbuf;
+ uint16_t i = 0;
+ do {
+ uint8_t c = fgetc(infile);
+ if (!feof(infile)) {
+ inbuf[i++] = c;
+ compressed_fpga_stream.avail_in++;
+ } else {
+ break;
+ }
+ } while (i < DECOMPRESS_BUF_SIZE);
+ }
+
+ ret = inflate(&compressed_fpga_stream, Z_SYNC_FLUSH);
+
+ if (ret != Z_OK && ret != Z_STREAM_END) {
+ break;
+ }
+
+ if (compressed_fpga_stream.avail_out == 0) {
+ for (uint16_t i = 0; i < DECOMPRESS_BUF_SIZE; i++) {
+ fputc(outbuf[i], outfile);
+ }
+ compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE;
+ compressed_fpga_stream.next_out = outbuf;
+ }
+ } while (ret == Z_OK);
+
+ if (ret == Z_STREAM_END) { // reached end of input
+ uint16_t i = 0;
+ while (compressed_fpga_stream.avail_out < DECOMPRESS_BUF_SIZE) {
+ fputc(outbuf[i++], outfile);
+ compressed_fpga_stream.avail_out++;
+ }
+ fclose(outfile);
+ fclose(infile);
+ return(EXIT_SUCCESS);
+ } else {
+ fprintf(stderr, "Error. Inflate() returned error %d, %s", ret, compressed_fpga_stream.msg);
+ fclose(outfile);
+ fclose(infile);
+ return(EXIT_FAILURE);
+ }
+
+}
+
+
+int main(int argc, char **argv)
+{
+ FILE **infiles;
+ FILE *outfile;
+
+ if (argc == 1 || argc == 2) {
+ usage();
+ return(EXIT_FAILURE);
+ }
+
+ if (!strcmp(argv[1], "-d")) { // Decompress
+ infiles = calloc(1, sizeof(FILE*));
+ if (argc != 4) {
+ usage();
+ return(EXIT_FAILURE);
+ }
+ infiles[0] = fopen(argv[2], "rb");
+ if (infiles[0] == NULL) {
+ fprintf(stderr, "Error. Cannot open input file %s", argv[2]);
+ return(EXIT_FAILURE);
+ }
+ outfile = fopen(argv[3], "wb");
+ if (outfile == NULL) {
+ fprintf(stderr, "Error. Cannot open output file %s", argv[3]);
+ return(EXIT_FAILURE);
+ }
+ return zlib_decompress(infiles[0], outfile);
+
+ } else { // Compress
+
+ infiles = calloc(argc-2, sizeof(FILE*));
+ for (uint16_t i = 0; i < argc-2; i++) {
+ infiles[i] = fopen(argv[i+1], "rb");
+ if (infiles[i] == NULL) {
+ fprintf(stderr, "Error. Cannot open input file %s", argv[i+1]);
+ return(EXIT_FAILURE);
+ }
+ }
+ outfile = fopen(argv[argc-1], "wb");
+ if (outfile == NULL) {
+ fprintf(stderr, "Error. Cannot open output file %s", argv[argc-1]);
+ return(EXIT_FAILURE);
+ }
+ return zlib_compress(infiles, argc-2, outfile);
+ }
+}
--- /dev/null
+
+ ChangeLog file for zlib
+
+Changes in 1.2.8.f-Proxmark3 (for Proxmark3 project only) (26 May 2015)
+- disable decoding of fixed code blocks in deflate (eliminates the need
+ to store the fixed tree in RAM or ROM)
+- disable generating fixed code blocks in inflate
+- look harder for local optimum of consecutive matches and single literals
+ in inflate.
+- stripped down version - unnecessary files from original distribution
+ are not included
+
+Changes in 1.2.8 (28 Apr 2013)
+- Update contrib/minizip/iowin32.c for Windows RT [Vollant]
+- Do not force Z_CONST for C++
+- Clean up contrib/vstudio [Ro§]
+- Correct spelling error in zlib.h
+- Fix mixed line endings in contrib/vstudio
+
+Changes in 1.2.7.3 (13 Apr 2013)
+- Fix version numbers and DLL names in contrib/vstudio/*/zlib.rc
+
+Changes in 1.2.7.2 (13 Apr 2013)
+- Change check for a four-byte type back to hexadecimal
+- Fix typo in win32/Makefile.msc
+- Add casts in gzwrite.c for pointer differences
+
+Changes in 1.2.7.1 (24 Mar 2013)
+- Replace use of unsafe string functions with snprintf if available
+- Avoid including stddef.h on Windows for Z_SOLO compile [Niessink]
+- Fix gzgetc undefine when Z_PREFIX set [Turk]
+- Eliminate use of mktemp in Makefile (not always available)
+- Fix bug in 'F' mode for gzopen()
+- Add inflateGetDictionary() function
+- Correct comment in deflate.h
+- Use _snprintf for snprintf in Microsoft C
+- On Darwin, only use /usr/bin/libtool if libtool is not Apple
+- Delete "--version" file if created by "ar --version" [Richard G.]
+- Fix configure check for veracity of compiler error return codes
+- Fix CMake compilation of static lib for MSVC2010 x64
+- Remove unused variable in infback9.c
+- Fix argument checks in gzlog_compress() and gzlog_write()
+- Clean up the usage of z_const and respect const usage within zlib
+- Clean up examples/gzlog.[ch] comparisons of different types
+- Avoid shift equal to bits in type (caused endless loop)
+- Fix unintialized value bug in gzputc() introduced by const patches
+- Fix memory allocation error in examples/zran.c [Nor]
+- Fix bug where gzopen(), gzclose() would write an empty file
+- Fix bug in gzclose() when gzwrite() runs out of memory
+- Check for input buffer malloc failure in examples/gzappend.c
+- Add note to contrib/blast to use binary mode in stdio
+- Fix comparisons of differently signed integers in contrib/blast
+- Check for invalid code length codes in contrib/puff
+- Fix serious but very rare decompression bug in inftrees.c
+- Update inflateBack() comments, since inflate() can be faster
+- Use underscored I/O function names for WINAPI_FAMILY
+- Add _tr_flush_bits to the external symbols prefixed by --zprefix
+- Add contrib/vstudio/vc10 pre-build step for static only
+- Quote --version-script argument in CMakeLists.txt
+- Don't specify --version-script on Apple platforms in CMakeLists.txt
+- Fix casting error in contrib/testzlib/testzlib.c
+- Fix types in contrib/minizip to match result of get_crc_table()
+- Simplify contrib/vstudio/vc10 with 'd' suffix
+- Add TOP support to win32/Makefile.msc
+- Suport i686 and amd64 assembler builds in CMakeLists.txt
+- Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h
+- Add vc11 and vc12 build files to contrib/vstudio
+- Add gzvprintf() as an undocumented function in zlib
+- Fix configure for Sun shell
+- Remove runtime check in configure for four-byte integer type
+- Add casts and consts to ease user conversion to C++
+- Add man pages for minizip and miniunzip
+- In Makefile uninstall, don't rm if preceding cd fails
+- Do not return Z_BUF_ERROR if deflateParam() has nothing to write
+
+Changes in 1.2.7 (2 May 2012)
+- Replace use of memmove() with a simple copy for portability
+- Test for existence of strerror
+- Restore gzgetc_ for backward compatibility with 1.2.6
+- Fix build with non-GNU make on Solaris
+- Require gcc 4.0 or later on Mac OS X to use the hidden attribute
+- Include unistd.h for Watcom C
+- Use __WATCOMC__ instead of __WATCOM__
+- Do not use the visibility attribute if NO_VIZ defined
+- Improve the detection of no hidden visibility attribute
+- Avoid using __int64 for gcc or solo compilation
+- Cast to char * in gzprintf to avoid warnings [Zinser]
+- Fix make_vms.com for VAX [Zinser]
+- Don't use library or built-in byte swaps
+- Simplify test and use of gcc hidden attribute
+- Fix bug in gzclose_w() when gzwrite() fails to allocate memory
+- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
+- Fix bug in test/minigzip.c for configure --solo
+- Fix contrib/vstudio project link errors [Mohanathas]
+- Add ability to choose the builder in make_vms.com [Schweda]
+- Add DESTDIR support to mingw32 win32/Makefile.gcc
+- Fix comments in win32/Makefile.gcc for proper usage
+- Allow overriding the default install locations for cmake
+- Generate and install the pkg-config file with cmake
+- Build both a static and a shared version of zlib with cmake
+- Include version symbols for cmake builds
+- If using cmake with MSVC, add the source directory to the includes
+- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta]
+- Move obsolete emx makefile to old [Truta]
+- Allow the use of -Wundef when compiling or using zlib
+- Avoid the use of the -u option with mktemp
+- Improve inflate() documentation on the use of Z_FINISH
+- Recognize clang as gcc
+- Add gzopen_w() in Windows for wide character path names
+- Rename zconf.h in CMakeLists.txt to move it out of the way
+- Add source directory in CMakeLists.txt for building examples
+- Look in build directory for zlib.pc in CMakeLists.txt
+- Remove gzflags from zlibvc.def in vc9 and vc10
+- Fix contrib/minizip compilation in the MinGW environment
+- Update ./configure for Solaris, support --64 [Mooney]
+- Remove -R. from Solaris shared build (possible security issue)
+- Avoid race condition for parallel make (-j) running example
+- Fix type mismatch between get_crc_table() and crc_table
+- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler]
+- Fix the path to zlib.map in CMakeLists.txt
+- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe]
+- Add instructions to win32/Makefile.gcc for shared install [Torri]
+
+Changes in 1.2.6.1 (12 Feb 2012)
+- Avoid the use of the Objective-C reserved name "id"
+- Include io.h in gzguts.h for Microsoft compilers
+- Fix problem with ./configure --prefix and gzgetc macro
+- Include gz_header definition when compiling zlib solo
+- Put gzflags() functionality back in zutil.c
+- Avoid library header include in crc32.c for Z_SOLO
+- Use name in GCC_CLASSIC as C compiler for coverage testing, if set
+- Minor cleanup in contrib/minizip/zip.c [Vollant]
+- Update make_vms.com [Zinser]
+- Remove unnecessary gzgetc_ function
+- Use optimized byte swap operations for Microsoft and GNU [Snyder]
+- Fix minor typo in zlib.h comments [Rzesniowiecki]
+
+Changes in 1.2.6 (29 Jan 2012)
+- Update the Pascal interface in contrib/pascal
+- Fix function numbers for gzgetc_ in zlibvc.def files
+- Fix configure.ac for contrib/minizip [Schiffer]
+- Fix large-entry detection in minizip on 64-bit systems [Schiffer]
+- Have ./configure use the compiler return code for error indication
+- Fix CMakeLists.txt for cross compilation [McClure]
+- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes]
+- Fix compilation of contrib/minizip on FreeBSD [Marquez]
+- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath]
+- Include io.h for Turbo C / Borland C on all platforms [Truta]
+- Make version explicit in contrib/minizip/configure.ac [Bosmans]
+- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant]
+- Minor cleanup up contrib/minizip/unzip.c [Vollant]
+- Fix bug when compiling minizip with C++ [Vollant]
+- Protect for long name and extra fields in contrib/minizip [Vollant]
+- Avoid some warnings in contrib/minizip [Vollant]
+- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip
+- Add missing libs to minizip linker command
+- Add support for VPATH builds in contrib/minizip
+- Add an --enable-demos option to contrib/minizip/configure
+- Add the generation of configure.log by ./configure
+- Exit when required parameters not provided to win32/Makefile.gcc
+- Have gzputc return the character written instead of the argument
+- Use the -m option on ldconfig for BSD systems [Tobias]
+- Correct in zlib.map when deflateResetKeep was added
+
+Changes in 1.2.5.3 (15 Jan 2012)
+- Restore gzgetc function for binary compatibility
+- Do not use _lseeki64 under Borland C++ [Truta]
+- Update win32/Makefile.msc to build test/*.c [Truta]
+- Remove old/visualc6 given CMakefile and other alternatives
+- Update AS400 build files and documentation [Monnerat]
+- Update win32/Makefile.gcc to build test/*.c [Truta]
+- Permit stronger flushes after Z_BLOCK flushes
+- Avoid extraneous empty blocks when doing empty flushes
+- Permit Z_NULL arguments to deflatePending
+- Allow deflatePrime() to insert bits in the middle of a stream
+- Remove second empty static block for Z_PARTIAL_FLUSH
+- Write out all of the available bits when using Z_BLOCK
+- Insert the first two strings in the hash table after a flush
+
+Changes in 1.2.5.2 (17 Dec 2011)
+- fix ld error: unable to find version dependency 'ZLIB_1.2.5'
+- use relative symlinks for shared libs
+- Avoid searching past window for Z_RLE strategy
+- Assure that high-water mark initialization is always applied in deflate
+- Add assertions to fill_window() in deflate.c to match comments
+- Update python link in README
+- Correct spelling error in gzread.c
+- Fix bug in gzgets() for a concatenated empty gzip stream
+- Correct error in comment for gz_make()
+- Change gzread() and related to ignore junk after gzip streams
+- Allow gzread() and related to continue after gzclearerr()
+- Allow gzrewind() and gzseek() after a premature end-of-file
+- Simplify gzseek() now that raw after gzip is ignored
+- Change gzgetc() to a macro for speed (~40% speedup in testing)
+- Fix gzclose() to return the actual error last encountered
+- Always add large file support for windows
+- Include zconf.h for windows large file support
+- Include zconf.h.cmakein for windows large file support
+- Update zconf.h.cmakein on make distclean
+- Merge vestigial vsnprintf determination from zutil.h to gzguts.h
+- Clarify how gzopen() appends in zlib.h comments
+- Correct documentation of gzdirect() since junk at end now ignored
+- Add a transparent write mode to gzopen() when 'T' is in the mode
+- Update python link in zlib man page
+- Get inffixed.h and MAKEFIXED result to match
+- Add a ./config --solo option to make zlib subset with no libary use
+- Add undocumented inflateResetKeep() function for CAB file decoding
+- Add --cover option to ./configure for gcc coverage testing
+- Add #define ZLIB_CONST option to use const in the z_stream interface
+- Add comment to gzdopen() in zlib.h to use dup() when using fileno()
+- Note behavior of uncompress() to provide as much data as it can
+- Add files in contrib/minizip to aid in building libminizip
+- Split off AR options in Makefile.in and configure
+- Change ON macro to Z_ARG to avoid application conflicts
+- Facilitate compilation with Borland C++ for pragmas and vsnprintf
+- Include io.h for Turbo C / Borland C++
+- Move example.c and minigzip.c to test/
+- Simplify incomplete code table filling in inflate_table()
+- Remove code from inflate.c and infback.c that is impossible to execute
+- Test the inflate code with full coverage
+- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw)
+- Add deflateResetKeep and fix inflateResetKeep to retain dictionary
+- Fix gzwrite.c to accommodate reduced memory zlib compilation
+- Have inflate() with Z_FINISH avoid the allocation of a window
+- Do not set strm->adler when doing raw inflate
+- Fix gzeof() to behave just like feof() when read is not past end of file
+- Fix bug in gzread.c when end-of-file is reached
+- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF
+- Document gzread() capability to read concurrently written files
+- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo]
+
+Changes in 1.2.5.1 (10 Sep 2011)
+- Update FAQ entry on shared builds (#13)
+- Avoid symbolic argument to chmod in Makefile.in
+- Fix bug and add consts in contrib/puff [Oberhumer]
+- Update contrib/puff/zeros.raw test file to have all block types
+- Add full coverage test for puff in contrib/puff/Makefile
+- Fix static-only-build install in Makefile.in
+- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
+- Add libz.a dependency to shared in Makefile.in for parallel builds
+- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
+- Replace $(...) with `...` in configure for non-bash sh [Bowler]
+- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
+- Add solaris* to Linux* in configure to allow gcc use [Groffen]
+- Add *bsd* to Linux* case in configure [Bar-Lev]
+- Add inffast.obj to dependencies in win32/Makefile.msc
+- Correct spelling error in deflate.h [Kohler]
+- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
+- Add test to configure for GNU C looking for gcc in output of $cc -v
+- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
+- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
+- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
+- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
+- Make stronger test in zconf.h to include unistd.h for LFS
+- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
+- Fix zlib.h LFS support when Z_PREFIX used
+- Add updated as400 support (removed from old) [Monnerat]
+- Avoid deflate sensitivity to volatile input data
+- Avoid division in adler32_combine for NO_DIVIDE
+- Clarify the use of Z_FINISH with deflateBound() amount of space
+- Set binary for output file in puff.c
+- Use u4 type for crc_table to avoid conversion warnings
+- Apply casts in zlib.h to avoid conversion warnings
+- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
+- Improve inflateSync() documentation to note indeterminancy
+- Add deflatePending() function to return the amount of pending output
+- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
+- Add a check in configure for stdarg.h, use for gzprintf()
+- Check that pointers fit in ints when gzprint() compiled old style
+- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
+- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
+- Add debug records in assmebler code [Londer]
+- Update RFC references to use http://tools.ietf.org/html/... [Li]
+- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
+
+Changes in 1.2.5 (19 Apr 2010)
+- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
+- Default to libdir as sharedlibdir in configure [Nieder]
+- Update copyright dates on modified source files
+- Update trees.c to be able to generate modified trees.h
+- Exit configure for MinGW, suggesting win32/Makefile.gcc
+- Check for NULL path in gz_open [Homurlu]
+
+Changes in 1.2.4.5 (18 Apr 2010)
+- Set sharedlibdir in configure [Torok]
+- Set LDFLAGS in Makefile.in [Bar-Lev]
+- Avoid mkdir objs race condition in Makefile.in [Bowler]
+- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
+- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
+- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
+
+Changes in 1.2.4.4 (18 Apr 2010)
+- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
+- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
+- Try to use bash or ksh regardless of functionality of /bin/sh
+- Fix configure incompatibility with NetBSD sh
+- Remove attempt to run under bash or ksh since have better NetBSD fix
+- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
+- Add diagnostic messages when using CROSS_PREFIX in configure
+- Added --sharedlibdir option to configure [Weigelt]
+- Use hidden visibility attribute when available [Frysinger]
+
+Changes in 1.2.4.3 (10 Apr 2010)
+- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
+- Use CROSS_PREFIX for nm [Bar-Lev]
+- Assume _LARGEFILE64_SOURCE defined is equivalent to true
+- Avoid use of undefined symbols in #if with && and ||
+- Make *64 prototypes in gzguts.h consistent with functions
+- Add -shared load option for MinGW in configure [Bowler]
+- Move z_off64_t to public interface, use instead of off64_t
+- Remove ! from shell test in configure (not portable to Solaris)
+- Change +0 macro tests to -0 for possibly increased portability
+
+Changes in 1.2.4.2 (9 Apr 2010)
+- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
+- Really provide prototypes for *64 functions when building without LFS
+- Only define unlink() in minigzip.c if unistd.h not included
+- Update README to point to contrib/vstudio project files
+- Move projects/vc6 to old/ and remove projects/
+- Include stdlib.h in minigzip.c for setmode() definition under WinCE
+- Clean up assembler builds in win32/Makefile.msc [Rowe]
+- Include sys/types.h for Microsoft for off_t definition
+- Fix memory leak on error in gz_open()
+- Symbolize nm as $NM in configure [Weigelt]
+- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
+- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
+- Fix bug in gzeof() to take into account unused input data
+- Avoid initialization of structures with variables in puff.c
+- Updated win32/README-WIN32.txt [Rowe]
+
+Changes in 1.2.4.1 (28 Mar 2010)
+- Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
+- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
+- Restore "for debugging" comment on sprintf() in gzlib.c
+- Remove fdopen for MVS from gzguts.h
+- Put new README-WIN32.txt in win32 [Rowe]
+- Add check for shell to configure and invoke another shell if needed
+- Fix big fat stinking bug in gzseek() on uncompressed files
+- Remove vestigial F_OPEN64 define in zutil.h
+- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE
+- Avoid errors on non-LFS systems when applications define LFS macros
+- Set EXE to ".exe" in configure for MINGW [Kahle]
+- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill]
+- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev]
+- Add DLL install in win32/makefile.gcc [Bar-Lev]
+- Allow Linux* or linux* from uname in configure [Bar-Lev]
+- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev]
+- Add cross-compilation prefixes to configure [Bar-Lev]
+- Match type exactly in gz_load() invocation in gzread.c
+- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func
+- Provide prototypes for *64 functions when building zlib without LFS
+- Don't use -lc when linking shared library on MinGW
+- Remove errno.h check in configure and vestigial errno code in zutil.h
+
+Changes in 1.2.4 (14 Mar 2010)
+- Fix VER3 extraction in configure for no fourth subversion
+- Update zlib.3, add docs to Makefile.in to make .pdf out of it
+- Add zlib.3.pdf to distribution
+- Don't set error code in gzerror() if passed pointer is NULL
+- Apply destination directory fixes to CMakeLists.txt [Lowman]
+- Move #cmakedefine's to a new zconf.in.cmakein
+- Restore zconf.h for builds that don't use configure or cmake
+- Add distclean to dummy Makefile for convenience
+- Update and improve INDEX, README, and FAQ
+- Update CMakeLists.txt for the return of zconf.h [Lowman]
+- Update contrib/vstudio/vc9 and vc10 [Vollant]
+- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc
+- Apply license and readme changes to contrib/asm686 [Raiter]
+- Check file name lengths and add -c option in minigzip.c [Li]
+- Update contrib/amd64 and contrib/masmx86/ [Vollant]
+- Avoid use of "eof" parameter in trees.c to not shadow library variable
+- Update make_vms.com for removal of zlibdefs.h [Zinser]
+- Update assembler code and vstudio projects in contrib [Vollant]
+- Remove outdated assembler code contrib/masm686 and contrib/asm586
+- Remove old vc7 and vc8 from contrib/vstudio
+- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe]
+- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open()
+- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant]
+- Remove *64 functions from win32/zlib.def (they're not 64-bit yet)
+- Fix bug in void-returning vsprintf() case in gzwrite.c
+- Fix name change from inflate.h in contrib/inflate86/inffas86.c
+- Check if temporary file exists before removing in make_vms.com [Zinser]
+- Fix make install and uninstall for --static option
+- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
+- Update readme.txt in contrib/masmx64 and masmx86 to assemble
+
+Changes in 1.2.3.9 (21 Feb 2010)
+- Expunge gzio.c
+- Move as400 build information to old
+- Fix updates in contrib/minizip and contrib/vstudio
+- Add const to vsnprintf test in configure to avoid warnings [Weigelt]
+- Delete zconf.h (made by configure) [Weigelt]
+- Change zconf.in.h to zconf.h.in per convention [Weigelt]
+- Check for NULL buf in gzgets()
+- Return empty string for gzgets() with len == 1 (like fgets())
+- Fix description of gzgets() in zlib.h for end-of-file, NULL return
+- Update minizip to 1.1 [Vollant]
+- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c
+- Note in zlib.h that gzerror() should be used to distinguish from EOF
+- Remove use of snprintf() from gzlib.c
+- Fix bug in gzseek()
+- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant]
+- Fix zconf.h generation in CMakeLists.txt [Lowman]
+- Improve comments in zconf.h where modified by configure
+
+Changes in 1.2.3.8 (13 Feb 2010)
+- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer]
+- Use z_off64_t in gz_zero() and gz_skip() to match state->skip
+- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t)
+- Revert to Makefile.in from 1.2.3.6 (live with the clutter)
+- Fix missing error return in gzflush(), add zlib.h note
+- Add *64 functions to zlib.map [Levin]
+- Fix signed/unsigned comparison in gz_comp()
+- Use SFLAGS when testing shared linking in configure
+- Add --64 option to ./configure to use -m64 with gcc
+- Fix ./configure --help to correctly name options
+- Have make fail if a test fails [Levin]
+- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson]
+- Remove assembler object files from contrib
+
+Changes in 1.2.3.7 (24 Jan 2010)
+- Always gzopen() with O_LARGEFILE if available
+- Fix gzdirect() to work immediately after gzopen() or gzdopen()
+- Make gzdirect() more precise when the state changes while reading
+- Improve zlib.h documentation in many places
+- Catch memory allocation failure in gz_open()
+- Complete close operation if seek forward in gzclose_w() fails
+- Return Z_ERRNO from gzclose_r() if close() fails
+- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL
+- Return zero for gzwrite() errors to match zlib.h description
+- Return -1 on gzputs() error to match zlib.h description
+- Add zconf.in.h to allow recovery from configure modification [Weigelt]
+- Fix static library permissions in Makefile.in [Weigelt]
+- Avoid warnings in configure tests that hide functionality [Weigelt]
+- Add *BSD and DragonFly to Linux case in configure [gentoo 123571]
+- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212]
+- Avoid access of uninitialized data for first inflateReset2 call [Gomes]
+- Keep object files in subdirectories to reduce the clutter somewhat
+- Remove default Makefile and zlibdefs.h, add dummy Makefile
+- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_
+- Remove zlibdefs.h completely -- modify zconf.h instead
+
+Changes in 1.2.3.6 (17 Jan 2010)
+- Avoid void * arithmetic in gzread.c and gzwrite.c
+- Make compilers happier with const char * for gz_error message
+- Avoid unused parameter warning in inflate.c
+- Avoid signed-unsigned comparison warning in inflate.c
+- Indent #pragma's for traditional C
+- Fix usage of strwinerror() in glib.c, change to gz_strwinerror()
+- Correct email address in configure for system options
+- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
+- Update zlib.map [Brown]
+- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
+- Apply various fixes to CMakeLists.txt [Lowman]
+- Add checks on len in gzread() and gzwrite()
+- Add error message for no more room for gzungetc()
+- Remove zlib version check in gzwrite()
+- Defer compression of gzprintf() result until need to
+- Use snprintf() in gzdopen() if available
+- Remove USE_MMAP configuration determination (only used by minigzip)
+- Remove examples/pigz.c (available separately)
+- Update examples/gun.c to 1.6
+
+Changes in 1.2.3.5 (8 Jan 2010)
+- Add space after #if in zutil.h for some compilers
+- Fix relatively harmless bug in deflate_fast() [Exarevsky]
+- Fix same problem in deflate_slow()
+- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown]
+- Add deflate_rle() for faster Z_RLE strategy run-length encoding
+- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding
+- Change name of "write" variable in inffast.c to avoid library collisions
+- Fix premature EOF from gzread() in gzio.c [Brown]
+- Use zlib header window size if windowBits is 0 in inflateInit2()
+- Remove compressBound() call in deflate.c to avoid linking compress.o
+- Replace use of errno in gz* with functions, support WinCE [Alves]
+- Provide alternative to perror() in minigzip.c for WinCE [Alves]
+- Don't use _vsnprintf on later versions of MSVC [Lowman]
+- Add CMake build script and input file [Lowman]
+- Update contrib/minizip to 1.1 [Svensson, Vollant]
+- Moved nintendods directory from contrib to .
+- Replace gzio.c with a new set of routines with the same functionality
+- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
+- Update contrib/minizip to 1.1b
+- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h
+
+Changes in 1.2.3.4 (21 Dec 2009)
+- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility
+- Update comments in configure and Makefile.in for default --shared
+- Fix test -z's in configure [Marquess]
+- Build examplesh and minigzipsh when not testing
+- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h
+- Import LDFLAGS from the environment in configure
+- Fix configure to populate SFLAGS with discovered CFLAGS options
+- Adapt make_vms.com to the new Makefile.in [Zinser]
+- Add zlib2ansi script for C++ compilation [Marquess]
+- Add _FILE_OFFSET_BITS=64 test to make test (when applicable)
+- Add AMD64 assembler code for longest match to contrib [Teterin]
+- Include options from $SFLAGS when doing $LDSHARED
+- Simplify 64-bit file support by introducing z_off64_t type
+- Make shared object files in objs directory to work around old Sun cc
+- Use only three-part version number for Darwin shared compiles
+- Add rc option to ar in Makefile.in for when ./configure not run
+- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4*
+- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile
+- Protect against _FILE_OFFSET_BITS being defined when compiling zlib
+- Rename Makefile.in targets allstatic to static and allshared to shared
+- Fix static and shared Makefile.in targets to be independent
+- Correct error return bug in gz_open() by setting state [Brown]
+- Put spaces before ;;'s in configure for better sh compatibility
+- Add pigz.c (parallel implementation of gzip) to examples/
+- Correct constant in crc32.c to UL [Leventhal]
+- Reject negative lengths in crc32_combine()
+- Add inflateReset2() function to work like inflateEnd()/inflateInit2()
+- Include sys/types.h for _LARGEFILE64_SOURCE [Brown]
+- Correct typo in doc/algorithm.txt [Janik]
+- Fix bug in adler32_combine() [Zhu]
+- Catch missing-end-of-block-code error in all inflates and in puff
+ Assures that random input to inflate eventually results in an error
+- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/
+- Update ENOUGH and its usage to reflect discovered bounds
+- Fix gzerror() error report on empty input file [Brown]
+- Add ush casts in trees.c to avoid pedantic runtime errors
+- Fix typo in zlib.h uncompress() description [Reiss]
+- Correct inflate() comments with regard to automatic header detection
+- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays)
+- Put new version of gzlog (2.0) in examples with interruption recovery
+- Add puff compile option to permit invalid distance-too-far streams
+- Add puff TEST command options, ability to read piped input
+- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but
+ _LARGEFILE64_SOURCE not defined
+- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart
+- Fix deflateSetDictionary() to use all 32K for output consistency
+- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h)
+- Clear bytes after deflate lookahead to avoid use of uninitialized data
+- Change a limit in inftrees.c to be more transparent to Coverity Prevent
+- Update win32/zlib.def with exported symbols from zlib.h
+- Correct spelling errors in zlib.h [Willem, Sobrado]
+- Allow Z_BLOCK for deflate() to force a new block
+- Allow negative bits in inflatePrime() to delete existing bit buffer
+- Add Z_TREES flush option to inflate() to return at end of trees
+- Add inflateMark() to return current state information for random access
+- Add Makefile for NintendoDS to contrib [Costa]
+- Add -w in configure compile tests to avoid spurious warnings [Beucler]
+- Fix typos in zlib.h comments for deflateSetDictionary()
+- Fix EOF detection in transparent gzread() [Maier]
+
+Changes in 1.2.3.3 (2 October 2006)
+- Make --shared the default for configure, add a --static option
+- Add compile option to permit invalid distance-too-far streams
+- Add inflateUndermine() function which is required to enable above
+- Remove use of "this" variable name for C++ compatibility [Marquess]
+- Add testing of shared library in make test, if shared library built
+- Use ftello() and fseeko() if available instead of ftell() and fseek()
+- Provide two versions of all functions that use the z_off_t type for
+ binary compatibility -- a normal version and a 64-bit offset version,
+ per the Large File Support Extension when _LARGEFILE64_SOURCE is
+ defined; use the 64-bit versions by default when _FILE_OFFSET_BITS
+ is defined to be 64
+- Add a --uname= option to configure to perhaps help with cross-compiling
+
+Changes in 1.2.3.2 (3 September 2006)
+- Turn off silly Borland warnings [Hay]
+- Use off64_t and define _LARGEFILE64_SOURCE when present
+- Fix missing dependency on inffixed.h in Makefile.in
+- Rig configure --shared to build both shared and static [Teredesai, Truta]
+- Remove zconf.in.h and instead create a new zlibdefs.h file
+- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant]
+- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt]
+
+Changes in 1.2.3.1 (16 August 2006)
+- Add watcom directory with OpenWatcom make files [Daniel]
+- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
+- Update make_vms.com [Zinser]
+- Use -fPIC for shared build in configure [Teredesai, Nicholson]
+- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
+- Use fdopen() (not _fdopen()) for Interix in zutil.h [B\8ack]
+- Add some FAQ entries about the contrib directory
+- Update the MVS question in the FAQ
+- Avoid extraneous reads after EOF in gzio.c [Brown]
+- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
+- Add comments to zlib.h about gzerror() usage [Brown]
+- Set extra flags in gzip header in gzopen() like deflate() does
+- Make configure options more compatible with double-dash conventions
+ [Weigelt]
+- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
+- Fix uninstall target in Makefile.in [Truta]
+- Add pkgconfig support [Weigelt]
+- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
+- Replace set_data_type() with a more accurate detect_data_type() in
+ trees.c, according to the txtvsbin.txt document [Truta]
+- Swap the order of #include <stdio.h> and #include "zlib.h" in
+ gzio.c, example.c and minigzip.c [Truta]
+- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
+ Truta] (where?)
+- Fix target "clean" from win32/Makefile.bor [Truta]
+- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
+- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
+- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
+- Enable browse info in the "Debug" and "ASM Debug" configurations in
+ the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
+- Add pkgconfig support [Weigelt]
+- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
+ for use in win32/zlib1.rc [Polushin, Rowe, Truta]
+- Add a document that explains the new text detection scheme to
+ doc/txtvsbin.txt [Truta]
+- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
+- Move algorithm.txt into doc/ [Truta]
+- Synchronize FAQ with website
+- Fix compressBound(), was low for some pathological cases [Fearnley]
+- Take into account wrapper variations in deflateBound()
+- Set examples/zpipe.c input and output to binary mode for Windows
+- Update examples/zlib_how.html with new zpipe.c (also web site)
+- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
+ that gcc became pickier in 4.0)
+- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
+ un-versioned, the patch adds versioning only for symbols introduced in
+ zlib-1.2.0 or later. It also declares as local those symbols which are
+ not designed to be exported." [Levin]
+- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
+- Do not initialize global static by default in trees.c, add a response
+ NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
+- Don't use strerror() in gzio.c under WinCE [Yakimov]
+- Don't use errno.h in zutil.h under WinCE [Yakimov]
+- Move arguments for AR to its usage to allow replacing ar [Marot]
+- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
+- Improve inflateInit() and inflateInit2() documentation
+- Fix structure size comment in inflate.h
+- Change configure help option from --h* to --help [Santos]
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+ compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Add zran.c example of compressed data random access to examples
+ directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+ ENOUGH and MAXD -- this repairs a possible security vulnerability for
+ invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for
+ discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+ avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+ fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+ and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+ contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
+Changes in 1.2.1.1 (9 January 2004)
+- Update email address in README
+- Several FAQ updates
+- Fix a big fat bug in inftrees.c that prevented decoding valid
+ dynamic blocks with only literals and no distance codes --
+ Thanks to "Hot Emu" for the bug report and sample file
+- Add a note to puff.c on no distance codes case.
+
+Changes in 1.2.1 (17 November 2003)
+- Remove a tab in contrib/gzappend/gzappend.c
+- Update some interfaces in contrib for new zlib functions
+- Update zlib version number in some contrib entries
+- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
+- Support shared libraries on Hurd and KFreeBSD [Brown]
+- Fix error in NO_DIVIDE option of adler32.c
+
+Changes in 1.2.0.8 (4 November 2003)
+- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas
+- Add experimental NO_DIVIDE #define in adler32.c
+ - Possibly faster on some processors (let me know if it is)
+- Correct Z_BLOCK to not return on first inflate call if no wrap
+- Fix strm->data_type on inflate() return to correctly indicate EOB
+- Add deflatePrime() function for appending in the middle of a byte
+- Add contrib/gzappend for an example of appending to a stream
+- Update win32/DLL_FAQ.txt [Truta]
+- Delete Turbo C comment in README [Truta]
+- Improve some indentation in zconf.h [Truta]
+- Fix infinite loop on bad input in configure script [Church]
+- Fix gzeof() for concatenated gzip files [Johnson]
+- Add example to contrib/visual-basic.txt [Michael B.]
+- Add -p to mkdir's in Makefile.in [vda]
+- Fix configure to properly detect presence or lack of printf functions
+- Add AS400 support [Monnerat]
+- Add a little Cygwin support [Wilson]
+
+Changes in 1.2.0.7 (21 September 2003)
+- Correct some debug formats in contrib/infback9
+- Cast a type in a debug statement in trees.c
+- Change search and replace delimiter in configure from % to # [Beebe]
+- Update contrib/untgz to 0.2 with various fixes [Truta]
+- Add build support for Amiga [Nikl]
+- Remove some directories in old that have been updated to 1.2
+- Add dylib building for Mac OS X in configure and Makefile.in
+- Remove old distribution stuff from Makefile
+- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X
+- Update links in README
+
+Changes in 1.2.0.6 (13 September 2003)
+- Minor FAQ updates
+- Update contrib/minizip to 1.00 [Vollant]
+- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta]
+- Update POSTINC comment for 68060 [Nikl]
+- Add contrib/infback9 with deflate64 decoding (unsupported)
+- For MVS define NO_vsnprintf and undefine FAR [van Burik]
+- Add pragma for fdopen on MVS [van Burik]
+
+Changes in 1.2.0.5 (8 September 2003)
+- Add OF to inflateBackEnd() declaration in zlib.h
+- Remember start when using gzdopen in the middle of a file
+- Use internal off_t counters in gz* functions to properly handle seeks
+- Perform more rigorous check for distance-too-far in inffast.c
+- Add Z_BLOCK flush option to return from inflate at block boundary
+- Set strm->data_type on return from inflate
+ - Indicate bits unused, if at block boundary, and if in last block
+- Replace size_t with ptrdiff_t in crc32.c, and check for correct size
+- Add condition so old NO_DEFLATE define still works for compatibility
+- FAQ update regarding the Windows DLL [Truta]
+- INDEX update: add qnx entry, remove aix entry [Truta]
+- Install zlib.3 into mandir [Wilson]
+- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta]
+- Adapt the zlib interface to the new DLL convention guidelines [Truta]
+- Introduce ZLIB_WINAPI macro to allow the export of functions using
+ the WINAPI calling convention, for Visual Basic [Vollant, Truta]
+- Update msdos and win32 scripts and makefiles [Truta]
+- Export symbols by name, not by ordinal, in win32/zlib.def [Truta]
+- Add contrib/ada [Anisimkov]
+- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta]
+- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant]
+- Add contrib/masm686 [Truta]
+- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm
+ [Truta, Vollant]
+- Update contrib/delphi; rename to contrib/pascal; add example [Truta]
+- Remove contrib/delphi2; add a new contrib/delphi [Truta]
+- Avoid inclusion of the nonstandard <memory.h> in contrib/iostream,
+ and fix some method prototypes [Truta]
+- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip
+ [Truta]
+- Avoid the use of backslash (\) in contrib/minizip [Vollant]
+- Fix file time handling in contrib/untgz; update makefiles [Truta]
+- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines
+ [Vollant]
+- Remove contrib/vstudio/vc15_16 [Vollant]
+- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta]
+- Update README.contrib [Truta]
+- Invert the assignment order of match_head and s->prev[...] in
+ INSERT_STRING [Truta]
+- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings
+ [Truta]
+- Compare function pointers with 0, not with NULL or Z_NULL [Truta]
+- Fix prototype of syncsearch in inflate.c [Truta]
+- Introduce ASMINF macro to be enabled when using an ASM implementation
+ of inflate_fast [Truta]
+- Change NO_DEFLATE to NO_GZCOMPRESS [Truta]
+- Modify test_gzio in example.c to take a single file name as a
+ parameter [Truta]
+- Exit the example.c program if gzopen fails [Truta]
+- Add type casts around strlen in example.c [Truta]
+- Remove casting to sizeof in minigzip.c; give a proper type
+ to the variable compared with SUFFIX_LEN [Truta]
+- Update definitions of STDC and STDC99 in zconf.h [Truta]
+- Synchronize zconf.h with the new Windows DLL interface [Truta]
+- Use SYS16BIT instead of __32BIT__ to distinguish between
+ 16- and 32-bit platforms [Truta]
+- Use far memory allocators in small 16-bit memory models for
+ Turbo C [Truta]
+- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in
+ zlibCompileFlags [Truta]
+- Cygwin has vsnprintf [Wilson]
+- In Windows16, OS_CODE is 0, as in MSDOS [Truta]
+- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson]
+
+Changes in 1.2.0.4 (10 August 2003)
+- Minor FAQ updates
+- Be more strict when checking inflateInit2's windowBits parameter
+- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well
+- Add gzip wrapper option to deflateInit2 using windowBits
+- Add updated QNX rule in configure and qnx directory [Bonnefoy]
+- Make inflate distance-too-far checks more rigorous
+- Clean up FAR usage in inflate
+- Add casting to sizeof() in gzio.c and minigzip.c
+
+Changes in 1.2.0.3 (19 July 2003)
+- Fix silly error in gzungetc() implementation [Vollant]
+- Update contrib/minizip and contrib/vstudio [Vollant]
+- Fix printf format in example.c
+- Correct cdecl support in zconf.in.h [Anisimkov]
+- Minor FAQ updates
+
+Changes in 1.2.0.2 (13 July 2003)
+- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons
+- Attempt to avoid warnings in crc32.c for pointer-int conversion
+- Add AIX to configure, remove aix directory [Bakker]
+- Add some casts to minigzip.c
+- Improve checking after insecure sprintf() or vsprintf() calls
+- Remove #elif's from crc32.c
+- Change leave label to inf_leave in inflate.c and infback.c to avoid
+ library conflicts
+- Remove inflate gzip decoding by default--only enable gzip decoding by
+ special request for stricter backward compatibility
+- Add zlibCompileFlags() function to return compilation information
+- More typecasting in deflate.c to avoid warnings
+- Remove leading underscore from _Capital #defines [Truta]
+- Fix configure to link shared library when testing
+- Add some Windows CE target adjustments [Mai]
+- Remove #define ZLIB_DLL in zconf.h [Vollant]
+- Add zlib.3 [Rodgers]
+- Update RFC URL in deflate.c and algorithm.txt [Mai]
+- Add zlib_dll_FAQ.txt to contrib [Truta]
+- Add UL to some constants [Truta]
+- Update minizip and vstudio [Vollant]
+- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h
+- Expand use of NO_DUMMY_DECL to avoid all dummy structures
+- Added iostream3 to contrib [Schwardt]
+- Replace rewind() with fseek() for WinCE [Truta]
+- Improve setting of zlib format compression level flags
+ - Report 0 for huffman and rle strategies and for level == 0 or 1
+ - Report 2 only for level == 6
+- Only deal with 64K limit when necessary at compile time [Truta]
+- Allow TOO_FAR check to be turned off at compile time [Truta]
+- Add gzclearerr() function [Souza]
+- Add gzungetc() function
+
+Changes in 1.2.0.1 (17 March 2003)
+- Add Z_RLE strategy for run-length encoding [Truta]
+ - When Z_RLE requested, restrict matches to distance one
+ - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE
+- Correct FASTEST compilation to allow level == 0
+- Clean up what gets compiled for FASTEST
+- Incorporate changes to zconf.in.h [Vollant]
+ - Refine detection of Turbo C need for dummy returns
+ - Refine ZLIB_DLL compilation
+ - Include additional header file on VMS for off_t typedef
+- Try to use _vsnprintf where it supplants vsprintf [Vollant]
+- Add some casts in inffast.c
+- Enchance comments in zlib.h on what happens if gzprintf() tries to
+ write more than 4095 bytes before compression
+- Remove unused state from inflateBackEnd()
+- Remove exit(0) from minigzip.c, example.c
+- Get rid of all those darn tabs
+- Add "check" target to Makefile.in that does the same thing as "test"
+- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in
+- Update contrib/inflate86 [Anderson]
+- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant]
+- Add msdos and win32 directories with makefiles [Truta]
+- More additions and improvements to the FAQ
+
+Changes in 1.2.0 (9 March 2003)
+- New and improved inflate code
+ - About 20% faster
+ - Does not allocate 32K window unless and until needed
+ - Automatically detects and decompresses gzip streams
+ - Raw inflate no longer needs an extra dummy byte at end
+ - Added inflateBack functions using a callback interface--even faster
+ than inflate, useful for file utilities (gzip, zip)
+ - Added inflateCopy() function to record state for random access on
+ externally generated deflate streams (e.g. in gzip files)
+ - More readable code (I hope)
+- New and improved crc32()
+ - About 50% faster, thanks to suggestions from Rodney Brown
+- Add deflateBound() and compressBound() functions
+- Fix memory leak in deflateInit2()
+- Permit setting dictionary for raw deflate (for parallel deflate)
+- Fix const declaration for gzwrite()
+- Check for some malloc() failures in gzio.c
+- Fix bug in gzopen() on single-byte file 0x1f
+- Fix bug in gzread() on concatenated file with 0x1f at end of buffer
+ and next buffer doesn't start with 0x8b
+- Fix uncompress() to return Z_DATA_ERROR on truncated input
+- Free memory at end of example.c
+- Remove MAX #define in trees.c (conflicted with some libraries)
+- Fix static const's in deflate.c, gzio.c, and zutil.[ch]
+- Declare malloc() and free() in gzio.c if STDC not defined
+- Use malloc() instead of calloc() in zutil.c if int big enough
+- Define STDC for AIX
+- Add aix/ with approach for compiling shared library on AIX
+- Add HP-UX support for shared libraries in configure
+- Add OpenUNIX support for shared libraries in configure
+- Use $cc instead of gcc to build shared library
+- Make prefix directory if needed when installing
+- Correct Macintosh avoidance of typedef Byte in zconf.h
+- Correct Turbo C memory allocation when under Linux
+- Use libz.a instead of -lz in Makefile (assure use of compiled library)
+- Update configure to check for snprintf or vsnprintf functions and their
+ return value, warn during make if using an insecure function
+- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that
+ is lost when library is used--resolution is to build new zconf.h
+- Documentation improvements (in zlib.h):
+ - Document raw deflate and inflate
+ - Update RFCs URL
+ - Point out that zlib and gzip formats are different
+ - Note that Z_BUF_ERROR is not fatal
+ - Document string limit for gzprintf() and possible buffer overflow
+ - Note requirement on avail_out when flushing
+ - Note permitted values of flush parameter of inflate()
+- Add some FAQs (and even answers) to the FAQ
+- Add contrib/inflate86/ for x86 faster inflate
+- Add contrib/blast/ for PKWare Data Compression Library decompression
+- Add contrib/puff/ simple inflate for deflate format description
+
+Changes in 1.1.4 (11 March 2002)
+- ZFREE was repeated on same allocation on some error conditions.
+ This creates a security problem described in
+ http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+ less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+ of 256 bytes. (A complete fix will be available in 1.1.5).
+
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+ occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+ (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+ See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean" (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+ . zutil.c, zutil.h: added "const" for zmem*
+ . Make_vms.com: fixed some typos
+ . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+ . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+ . msdos/Makefile.*: use model-dependent name for the built zlib library
+ . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+ new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+ See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+ completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+ (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+ compression ratio on some files. This also allows inlining _tr_tally for
+ matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+ on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+ the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+ them at run time (thanks to Ken Raeburn for this suggestion). To create
+ trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+ gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occurring only with compression level 0 (thanks to
+ Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+ (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+ (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+ inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+ contrib/asm386/ by Gilles Vollant <info@winimage.com>
+ 386 asm code replacing longest_match().
+ contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+ A C++ I/O streams interface to the zlib gz* functions
+ contrib/iostream2/ by Tyge Løvset <Tyge.Lovset@cmr.no>
+ Another C++ I/O streams interface
+ contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ A very simple tar.gz file extractor using zlib
+ contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+ How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+ level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+ (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
+Changes in 1.0.5 (3 Jan 98)
+- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- Use const for rommable constants in inflate
+- Eliminate memory leaks on error conditions in inflate
+- Removed some vestigial code in inflate
+- Update web address in README
+
+Changes in 1.0.4 (24 Jul 96)
+- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
+ bit, so the decompressor could decompress all the correct data but went
+ on to attempt decompressing extra garbage data. This affected minigzip too.
+- zlibVersion and gzerror return const char* (needed for DLL)
+- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
+- use z_error only for DEBUG (avoid problem with DLLs)
+
+Changes in 1.0.3 (2 Jul 96)
+- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
+ small and medium models; this makes the library incompatible with previous
+ versions for these models. (No effect in large model or on other systems.)
+- return OK instead of BUF_ERROR if previous deflate call returned with
+ avail_out as zero but there is nothing to do
+- added memcmp for non STDC compilers
+- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
+- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
+- better check for 16-bit mode MSC (avoids problem with Symantec)
+
+Changes in 1.0.2 (23 May 96)
+- added Windows DLL support
+- added a function zlibVersion (for the DLL support)
+- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
+- Bytef is define's instead of typedef'd only for Borland C
+- avoid reading uninitialized memory in example.c
+- mention in README that the zlib format is now RFC1950
+- updated Makefile.dj2
+- added algorithm.doc
+
+Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
+- fix array overlay in deflate.c which sometimes caused bad compressed data
+- fix inflate bug with empty stored block
+- fix MSDOS medium model which was broken in 0.99
+- fix deflateParams() which could generated bad compressed data.
+- Bytef is define'd instead of typedef'ed (work around Borland bug)
+- added an INDEX file
+- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
+ Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
+- speed up adler32 for modern machines without auto-increment
+- added -ansi for IRIX in configure
+- static_init_done in trees.c is an int
+- define unlink as delete for VMS
+- fix configure for QNX
+- add configure branch for SCO and HPUX
+- avoid many warnings (unused variables, dead assignments, etc...)
+- no fdopen for BeOS
+- fix the Watcom fix for 32 bit mode (define FAR as empty)
+- removed redefinition of Byte for MKWERKS
+- work around an MWKERKS bug (incorrect merge of all .h files)
+
+Changes in 0.99 (27 Jan 96)
+- allow preset dictionary shared between compressor and decompressor
+- allow compression level 0 (no compression)
+- add deflateParams in zlib.h: allow dynamic change of compression level
+ and compression strategy.
+- test large buffers and deflateParams in example.c
+- add optional "configure" to build zlib as a shared library
+- suppress Makefile.qnx, use configure instead
+- fixed deflate for 64-bit systems (detected on Cray)
+- fixed inflate_blocks for 64-bit systems (detected on Alpha)
+- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
+- always return Z_BUF_ERROR when deflate() has nothing to do
+- deflateInit and inflateInit are now macros to allow version checking
+- prefix all global functions and types with z_ with -DZ_PREFIX
+- make falloc completely reentrant (inftrees.c)
+- fixed very unlikely race condition in ct_static_init
+- free in reverse order of allocation to help memory manager
+- use zlib-1.0/* instead of zlib/* inside the tar.gz
+- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
+ -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
+- allow gzread on concatenated .gz files
+- deflateEnd now returns Z_DATA_ERROR if it was premature
+- deflate is finally (?) fully deterministic (no matches beyond end of input)
+- Document Z_SYNC_FLUSH
+- add uninstall in Makefile
+- Check for __cpluplus in zlib.h
+- Better test in ct_align for partial flush
+- avoid harmless warnings for Borland C++
+- initialize hash_head in deflate.c
+- avoid warning on fdopen (gzio.c) for HP cc -Aa
+- include stdlib.h for STDC compilers
+- include errno.h for Cray
+- ignore error if ranlib doesn't exist
+- call ranlib twice for NeXTSTEP
+- use exec_prefix instead of prefix for libz.a
+- renamed ct_* as _tr_* to avoid conflict with applications
+- clear z->msg in inflateInit2 before any error return
+- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
+- fixed typo in zconf.h (_GNUC__ => __GNUC__)
+- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
+- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
+- in fcalloc, normalize pointer if size > 65520 bytes
+- don't use special fcalloc for 32 bit Borland C++
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use Z_BINARY instead of BINARY
+- document that gzclose after gzdopen will close the file
+- allow "a" as mode in gzopen.
+- fix error checking in gzread
+- allow skipping .gz extra-field on pipes
+- added reference to Perl interface in README
+- put the crc table in FAR data (I dislike more and more the medium model :)
+- added get_crc_table
+- added a dimension to all arrays (Borland C can't count).
+- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
+- guard against multiple inclusion of *.h (for precompiled header on Mac)
+- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
+- don't use unsized arrays to avoid silly warnings by Visual C++:
+ warning C4746: 'inflate_mask' : unsized array treated as '__far'
+ (what's wrong with far data in far model?).
+- define enum out of inflate_blocks_state to allow compilation with C++
+
+Changes in 0.95 (16 Aug 95)
+- fix MSDOS small and medium model (now easier to adapt to any compiler)
+- inlined send_bits
+- fix the final (:-) bug for deflate with flush (output was correct but
+ not completely flushed in rare occasions).
+- default window size is same for compression and decompression
+ (it's now sufficient to set MAX_WBITS in zconf.h).
+- voidp -> voidpf and voidnp -> voidp (for consistency with other
+ typedefs and because voidnp was not near in large model).
+
+Changes in 0.94 (13 Aug 95)
+- support MSDOS medium model
+- fix deflate with flush (could sometimes generate bad output)
+- fix deflateReset (zlib header was incorrectly suppressed)
+- added support for VMS
+- allow a compression level in gzopen()
+- gzflush now calls fflush
+- For deflate with flush, flush even if no more input is provided.
+- rename libgz.a as libz.a
+- avoid complex expression in infcodes.c triggering Turbo C bug
+- work around a problem with gcc on Alpha (in INSERT_STRING)
+- don't use inline functions (problem with some gcc versions)
+- allow renaming of Byte, uInt, etc... with #define.
+- avoid warning about (unused) pointer before start of array in deflate.c
+- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
+- avoid reserved word 'new' in trees.c
+
+Changes in 0.93 (25 June 95)
+- temporarily disable inline functions
+- make deflate deterministic
+- give enough lookahead for PARTIAL_FLUSH
+- Set binary mode for stdin/stdout in minigzip.c for OS/2
+- don't even use signed char in inflate (not portable enough)
+- fix inflate memory leak for segmented architectures
+
+Changes in 0.92 (3 May 95)
+- don't assume that char is signed (problem on SGI)
+- Clear bit buffer when starting a stored block
+- no memcpy on Pyramid
+- suppressed inftest.c
+- optimized fill_window, put longest_match inline for gcc
+- optimized inflate on stored blocks.
+- untabify all sources to simplify patches
+
+Changes in 0.91 (2 May 95)
+- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
+- Document the memory requirements in zconf.h
+- added "make install"
+- fix sync search logic in inflateSync
+- deflate(Z_FULL_FLUSH) now works even if output buffer too short
+- after inflateSync, don't scare people with just "lo world"
+- added support for DJGPP
+
+Changes in 0.9 (1 May 95)
+- don't assume that zalloc clears the allocated memory (the TurboC bug
+ was Mark's bug after all :)
+- let again gzread copy uncompressed data unchanged (was working in 0.71)
+- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
+- added a test of inflateSync in example.c
+- moved MAX_WBITS to zconf.h because users might want to change that.
+- document explicitly that zalloc(64K) on MSDOS must return a normalized
+ pointer (zero offset)
+- added Makefiles for Microsoft C, Turbo C, Borland C++
+- faster crc32()
+
+Changes in 0.8 (29 April 95)
+- added fast inflate (inffast.c)
+- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
+ is incompatible with previous versions of zlib which returned Z_OK.
+- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
+ (actually that was not a compiler bug, see 0.81 above)
+- gzread no longer reads one extra byte in certain cases
+- In gzio destroy(), don't reference a freed structure
+- avoid many warnings for MSDOS
+- avoid the ERROR symbol which is used by MS Windows
+
+Changes in 0.71 (14 April 95)
+- Fixed more MSDOS compilation problems :( There is still a bug with
+ TurboC large model.
+
+Changes in 0.7 (14 April 95)
+- Added full inflate support.
+- Simplified the crc32() interface. The pre- and post-conditioning
+ (one's complement) is now done inside crc32(). WARNING: this is
+ incompatible with previous versions; see zlib.h for the new usage.
+
+Changes in 0.61 (12 April 95)
+- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
+
+Changes in 0.6 (11 April 95)
+- added minigzip.c
+- added gzdopen to reopen a file descriptor as gzFile
+- added transparent reading of non-gziped files in gzread.
+- fixed bug in gzread (don't read crc as data)
+- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
+- don't allocate big arrays in the stack (for MSDOS)
+- fix some MSDOS compilation problems
+
+Changes in 0.5:
+- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
+ not yet Z_FULL_FLUSH.
+- support decompression but only in a single step (forced Z_FINISH)
+- added opaque object for zalloc and zfree.
+- added deflateReset and inflateReset
+- added a variable zlib_version for consistency checking.
+- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
+ Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
+
+Changes in 0.4:
+- avoid "zip" everywhere, use zlib instead of ziplib.
+- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
+ if compression method == 8.
+- added adler32 and crc32
+- renamed deflateOptions as deflateInit2, call one or the other but not both
+- added the method parameter for deflateInit2.
+- added inflateInit2
+- simplied considerably deflateInit and inflateInit by not supporting
+ user-provided history buffer. This is supported only in deflateInit2
+ and inflateInit2.
+
+Changes in 0.3:
+- prefix all macro names with Z_
+- use Z_FINISH instead of deflateEnd to finish compression.
+- added Z_HUFFMAN_ONLY
+- added gzerror()
--- /dev/null
+
+ Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page
+http://zlib.net/ which may have more recent information.
+The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
+
+
+ 1. Is zlib Y2K-compliant?
+
+ Yes. zlib doesn't handle dates.
+
+ 2. Where can I get a Windows DLL version?
+
+ The zlib sources can be compiled without change to produce a DLL. See the
+ file win32/DLL_FAQ.txt in the zlib distribution. Pointers to the
+ precompiled DLL are found in the zlib web site at http://zlib.net/ .
+
+ 3. Where can I get a Visual Basic interface to zlib?
+
+ See
+ * http://marknelson.us/1997/01/01/zlib-engine/
+ * win32/DLL_FAQ.txt in the zlib distribution
+
+ 4. compress() returns Z_BUF_ERROR.
+
+ Make sure that before the call of compress(), the length of the compressed
+ buffer is equal to the available size of the compressed buffer and not
+ zero. For Visual Basic, check that this parameter is passed by reference
+ ("as any"), not by value ("as long").
+
+ 5. deflate() or inflate() returns Z_BUF_ERROR.
+
+ Before making the call, make sure that avail_in and avail_out are not zero.
+ When setting the parameter flush equal to Z_FINISH, also make sure that
+ avail_out is big enough to allow processing all pending input. Note that a
+ Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be
+ made with more input or output space. A Z_BUF_ERROR may in fact be
+ unavoidable depending on how the functions are used, since it is not
+ possible to tell whether or not there is more output pending when
+ strm.avail_out returns with zero. See http://zlib.net/zlib_how.html for a
+ heavily annotated example.
+
+ 6. Where's the zlib documentation (man pages, etc.)?
+
+ It's in zlib.h . Examples of zlib usage are in the files test/example.c
+ and test/minigzip.c, with more in examples/ .
+
+ 7. Why don't you use GNU autoconf or libtool or ...?
+
+ Because we would like to keep zlib as a very small and simple package.
+ zlib is rather portable and doesn't need much configuration.
+
+ 8. I found a bug in zlib.
+
+ Most of the time, such problems are due to an incorrect usage of zlib.
+ Please try to reproduce the problem with a small program and send the
+ corresponding source to us at zlib@gzip.org . Do not send multi-megabyte
+ data files without prior agreement.
+
+ 9. Why do I get "undefined reference to gzputc"?
+
+ If "make test" produces something like
+
+ example.o(.text+0x154): undefined reference to `gzputc'
+
+ check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
+ /usr/X11R6/lib. Remove any old versions, then do "make install".
+
+10. I need a Delphi interface to zlib.
+
+ See the contrib/delphi directory in the zlib distribution.
+
+11. Can zlib handle .zip archives?
+
+ Not by itself, no. See the directory contrib/minizip in the zlib
+ distribution.
+
+12. Can zlib handle .Z files?
+
+ No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
+ the code of uncompress on your own.
+
+13. How can I make a Unix shared library?
+
+ By default a shared (and a static) library is built for Unix. So:
+
+ make distclean
+ ./configure
+ make
+
+14. How do I install a shared zlib library on Unix?
+
+ After the above, then:
+
+ make install
+
+ However, many flavors of Unix come with a shared zlib already installed.
+ Before going to the trouble of compiling a shared version of zlib and
+ trying to install it, you may want to check if it's already there! If you
+ can #include <zlib.h>, it's there. The -lz option will probably link to
+ it. You can check the version at the top of zlib.h or with the
+ ZLIB_VERSION symbol defined in zlib.h .
+
+15. I have a question about OttoPDF.
+
+ We are not the authors of OttoPDF. The real author is on the OttoPDF web
+ site: Joel Hainley, jhainley@myndkryme.com.
+
+16. Can zlib decode Flate data in an Adobe PDF file?
+
+ Yes. See http://www.pdflib.com/ . To modify PDF forms, see
+ http://sourceforge.net/projects/acroformtool/ .
+
+17. Why am I getting this "register_frame_info not found" error on Solaris?
+
+ After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
+ generates an error such as:
+
+ ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
+ symbol __register_frame_info: referenced symbol not found
+
+ The symbol __register_frame_info is not part of zlib, it is generated by
+ the C compiler (cc or gcc). You must recompile applications using zlib
+ which have this problem. This problem is specific to Solaris. See
+ http://www.sunfreeware.com for Solaris versions of zlib and applications
+ using zlib.
+
+18. Why does gzip give an error on a file I make with compress/deflate?
+
+ The compress and deflate functions produce data in the zlib format, which
+ is different and incompatible with the gzip format. The gz* functions in
+ zlib on the other hand use the gzip format. Both the zlib and gzip formats
+ use the same compressed data format internally, but have different headers
+ and trailers around the compressed data.
+
+19. Ok, so why are there two different formats?
+
+ The gzip format was designed to retain the directory information about a
+ single file, such as the name and last modification date. The zlib format
+ on the other hand was designed for in-memory and communication channel
+ applications, and has a much more compact header and trailer and uses a
+ faster integrity check than gzip.
+
+20. Well that's nice, but how do I make a gzip file in memory?
+
+ You can request that deflate write the gzip format instead of the zlib
+ format using deflateInit2(). You can also request that inflate decode the
+ gzip format using inflateInit2(). Read zlib.h for more details.
+
+21. Is zlib thread-safe?
+
+ Yes. However any library routines that zlib uses and any application-
+ provided memory allocation routines must also be thread-safe. zlib's gz*
+ functions use stdio library routines, and most of zlib's functions use the
+ library memory allocation routines by default. zlib's *Init* functions
+ allow for the application to provide custom memory allocation routines.
+
+ Of course, you should only operate on any given zlib or gzip stream from a
+ single thread at a time.
+
+22. Can I use zlib in my commercial application?
+
+ Yes. Please read the license in zlib.h.
+
+23. Is zlib under the GNU license?
+
+ No. Please read the license in zlib.h.
+
+24. The license says that altered source versions must be "plainly marked". So
+ what exactly do I need to do to meet that requirement?
+
+ You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In
+ particular, the final version number needs to be changed to "f", and an
+ identification string should be appended to ZLIB_VERSION. Version numbers
+ x.x.x.f are reserved for modifications to zlib by others than the zlib
+ maintainers. For example, if the version of the base zlib you are altering
+ is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
+ ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also
+ update the version strings in deflate.c and inftrees.c.
+
+ For altered source distributions, you should also note the origin and
+ nature of the changes in zlib.h, as well as in ChangeLog and README, along
+ with the dates of the alterations. The origin should include at least your
+ name (or your company's name), and an email address to contact for help or
+ issues with the library.
+
+ Note that distributing a compiled zlib library along with zlib.h and
+ zconf.h is also a source distribution, and so you should change
+ ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
+ in zlib.h as you would for a full source distribution.
+
+25. Will zlib work on a big-endian or little-endian architecture, and can I
+ exchange compressed data between them?
+
+ Yes and yes.
+
+26. Will zlib work on a 64-bit machine?
+
+ Yes. It has been tested on 64-bit machines, and has no dependence on any
+ data types being limited to 32-bits in length. If you have any
+ difficulties, please provide a complete problem report to zlib@gzip.org
+
+27. Will zlib decompress data from the PKWare Data Compression Library?
+
+ No. The PKWare DCL uses a completely different compressed data format than
+ does PKZIP and zlib. However, you can look in zlib's contrib/blast
+ directory for a possible solution to your problem.
+
+28. Can I access data randomly in a compressed stream?
+
+ No, not without some preparation. If when compressing you periodically use
+ Z_FULL_FLUSH, carefully write all the pending data at those points, and
+ keep an index of those locations, then you can start decompression at those
+ points. You have to be careful to not use Z_FULL_FLUSH too often, since it
+ can significantly degrade compression. Alternatively, you can scan a
+ deflate stream once to generate an index, and then use that index for
+ random access. See examples/zran.c .
+
+29. Does zlib work on MVS, OS/390, CICS, etc.?
+
+ It has in the past, but we have not heard of any recent evidence. There
+ were working ports of zlib 1.1.4 to MVS, but those links no longer work.
+ If you know of recent, successful applications of zlib on these operating
+ systems, please let us know. Thanks.
+
+30. Is there some simpler, easier to read version of inflate I can look at to
+ understand the deflate format?
+
+ First off, you should read RFC 1951. Second, yes. Look in zlib's
+ contrib/puff directory.
+
+31. Does zlib infringe on any patents?
+
+ As far as we know, no. In fact, that was originally the whole point behind
+ zlib. Look here for some more information:
+
+ http://www.gzip.org/#faq11
+
+32. Can zlib work with greater than 4 GB of data?
+
+ Yes. inflate() and deflate() will process any amount of data correctly.
+ Each call of inflate() or deflate() is limited to input and output chunks
+ of the maximum value that can be stored in the compiler's "unsigned int"
+ type, but there is no limit to the number of chunks. Note however that the
+ strm.total_in and strm_total_out counters may be limited to 4 GB. These
+ counters are provided as a convenience and are not used internally by
+ inflate() or deflate(). The application can easily set up its own counters
+ updated after each call of inflate() or deflate() to count beyond 4 GB.
+ compress() and uncompress() may be limited to 4 GB, since they operate in a
+ single call. gzseek() and gztell() may be limited to 4 GB depending on how
+ zlib is compiled. See the zlibCompileFlags() function in zlib.h.
+
+ The word "may" appears several times above since there is a 4 GB limit only
+ if the compiler's "long" type is 32 bits. If the compiler's "long" type is
+ 64 bits, then the limit is 16 exabytes.
+
+33. Does zlib have any security vulnerabilities?
+
+ The only one that we are aware of is potentially in gzprintf(). If zlib is
+ compiled to use sprintf() or vsprintf(), then there is no protection
+ against a buffer overflow of an 8K string space (or other value as set by
+ gzbuffer()), other than the caller of gzprintf() assuring that the output
+ will not exceed 8K. On the other hand, if zlib is compiled to use
+ snprintf() or vsnprintf(), which should normally be the case, then there is
+ no vulnerability. The ./configure script will display warnings if an
+ insecure variation of sprintf() will be used by gzprintf(). Also the
+ zlibCompileFlags() function will return information on what variant of
+ sprintf() is used by gzprintf().
+
+ If you don't have snprintf() or vsnprintf() and would like one, you can
+ find a portable implementation here:
+
+ http://www.ijs.si/software/snprintf/
+
+ Note that you should be using the most recent version of zlib. Versions
+ 1.1.3 and before were subject to a double-free vulnerability, and versions
+ 1.2.1 and 1.2.2 were subject to an access exception when decompressing
+ invalid compressed data.
+
+34. Is there a Java version of zlib?
+
+ Probably what you want is to use zlib in Java. zlib is already included
+ as part of the Java SDK in the java.util.zip package. If you really want
+ a version of zlib written in the Java language, look on the zlib home
+ page for links: http://zlib.net/ .
+
+35. I get this or that compiler or source-code scanner warning when I crank it
+ up to maximally-pedantic. Can't you guys write proper code?
+
+ Many years ago, we gave up attempting to avoid warnings on every compiler
+ in the universe. It just got to be a waste of time, and some compilers
+ were downright silly as well as contradicted each other. So now, we simply
+ make sure that the code always works.
+
+36. Valgrind (or some similar memory access checker) says that deflate is
+ performing a conditional jump that depends on an uninitialized value.
+ Isn't that a bug?
+
+ No. That is intentional for performance reasons, and the output of deflate
+ is not affected. This only started showing up recently since zlib 1.2.x
+ uses malloc() by default for allocations, whereas earlier versions used
+ calloc(), which zeros out the allocated memory. Even though the code was
+ correct, versions 1.2.4 and later was changed to not stimulate these
+ checkers.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
+ data format?
+
+ Probably not. Look in the comp.compression FAQ for pointers to various
+ formats and associated software.
+
+38. How can I encrypt/decrypt zip files with zlib?
+
+ zlib doesn't support encryption. The original PKZIP encryption is very
+ weak and can be broken with freely available programs. To get strong
+ encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib
+ compression. For PKZIP compatible "encryption", look at
+ http://www.info-zip.org/
+
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+
+ "gzip" is the gzip format, and "deflate" is the zlib format. They should
+ probably have called the second one "zlib" instead to avoid confusion with
+ the raw deflate compressed data format. While the HTTP 1.1 RFC 2616
+ correctly points to the zlib specification in RFC 1950 for the "deflate"
+ transfer encoding, there have been reports of servers and browsers that
+ incorrectly produce or expect raw deflate data per the deflate
+ specification in RFC 1951, most notably Microsoft. So even though the
+ "deflate" transfer encoding using the zlib format would be the more
+ efficient approach (and in fact exactly what the zlib format was designed
+ for), using the "gzip" transfer encoding is probably more reliable due to
+ an unfortunate choice of name on the part of the HTTP 1.1 authors.
+
+ Bottom line: use the gzip format for HTTP 1.1 encoding.
+
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
+
+ No. PKWare has apparently decided to keep that format proprietary, since
+ they have not documented it as they have previous compression formats. In
+ any case, the compression improvements are so modest compared to other more
+ modern approaches, that it's not worth the effort to implement.
+
+41. I'm having a problem with the zip functions in zlib, can you help?
+
+ There are no zip functions in zlib. You are probably using minizip by
+ Giles Vollant, which is found in the contrib directory of zlib. It is not
+ part of zlib. In fact none of the stuff in contrib is part of zlib. The
+ files in there are not supported by the zlib authors. You need to contact
+ the authors of the respective contribution for help.
+
+42. The match.asm code in contrib is under the GNU General Public License.
+ Since it's part of zlib, doesn't that mean that all of zlib falls under the
+ GNU GPL?
+
+ No. The files in contrib are not part of zlib. They were contributed by
+ other authors and are provided as a convenience to the user within the zlib
+ distribution. Each item in contrib has its own license.
+
+43. Is zlib subject to export controls? What is its ECCN?
+
+ zlib is not subject to export controls, and so is classified as EAR99.
+
+44. Can you please sign these lengthy legal documents and fax them back to us
+ so that we can use your software in our product?
+
+ No. Go away. Shoo.
--- /dev/null
+//-----------------------------------------------------------------------------
+// This version of zlib is modified for use within the Proxmark3 project.
+// Files from the original distribution which are not required for this
+// purpose are not included. All modifications can easily be found
+// by searching for #ifdef ZLIB_PM3_TUNED and #ifndef ZLIB_PM3_TUNED.
+//
+// The rest of this file consists of the original README content
+//-----------------------------------------------------------------------------
+
+ZLIB DATA COMPRESSION LIBRARY
+
+zlib 1.2.8 is a general purpose data compression library. All the code is
+thread safe. The data format used by the zlib library is described by RFCs
+(Request for Comments) 1950 to 1952 in the files
+http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
+rfc1952 (gzip format).
+
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example
+of the library is given in the file test/example.c which also tests that
+the library is working correctly. Another example is given in the file
+test/minigzip.c. The compression library itself is composed of all source
+files in the root directory.
+
+To compile all files and run the test program, follow the instructions given at
+the top of Makefile.in. In short "./configure; make test", and if that goes
+well, "make install" should work for most flavors of Unix. For Windows, use
+one of the special makefiles in win32/ or contrib/vstudio/ . For VMS, use
+make_vms.com.
+
+Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
+<info@winimage.com> for the Windows DLL version. The zlib home page is
+http://zlib.net/ . Before reporting a problem, please check this site to
+verify that you have the latest version of zlib; otherwise get the latest
+version and check whether the problem still exists or not.
+
+PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
+
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
+issue of Dr. Dobb's Journal; a copy of the article is available at
+http://marknelson.us/1997/01/01/zlib-engine/ .
+
+The changes made in version 1.2.8 are documented in the file ChangeLog.
+
+Unsupported third party contributions are provided in directory contrib/ .
+
+zlib is available in Java using the java.util.zip package, documented at
+http://java.sun.com/developer/technicalArticles/Programming/compression/ .
+
+A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
+at CPAN (Comprehensive Perl Archive Network) sites, including
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
+
+A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
+available in Python 1.5 and later versions, see
+http://docs.python.org/library/zlib.html .
+
+zlib is built into tcl: http://wiki.tcl.tk/4610 .
+
+An experimental package to read and write files in .zip format, written on top
+of zlib by Gilles Vollant <info@winimage.com>, is available in the
+contrib/minizip directory of zlib.
+
+
+Notes for some targets:
+
+- For Windows DLL versions, please see win32/DLL_FAQ.txt
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization. With
+ -O, one libpng test fails. The test works in 32 bit mode (with the -n32
+ compiler flag). The compiler bug has been reported to SGI.
+
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
+ when compiled with cc.
+
+- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
+ necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
+ other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS or BEOS.
+
+- For PalmOs, see http://palmzlib.sourceforge.net/
+
+
+Acknowledgments:
+
+ The deflate format used by zlib was defined by Phil Katz. The deflate and
+ zlib specifications were written by L. Peter Deutsch. Thanks to all the
+ people who reported problems and suggested various improvements in zlib; they
+ are too numerous to cite here.
+
+Copyright notice:
+
+ (C) 1995-2013 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+If you use the zlib library in a product, we would appreciate *not* receiving
+lengthy legal documents to sign. The sources are provided for free but without
+warranty of any kind. The library has been entirely written by Jean-loup
+Gailly and Mark Adler; it does not include third-party code.
+
+If you redistribute modified sources, we would appreciate that you include in
+the file ChangeLog history information documenting your changes. Please read
+the FAQ for more information on the distribution of modified source versions.
--- /dev/null
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2011 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+
+#define local static
+
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
+
+#define BASE 65521 /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
+#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf) DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware --
+ try it both ways to see which is faster */
+#ifdef NO_DIVIDE
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+ (thank you to John Reiser for pointing this out) */
+# define CHOP(a) \
+ do { \
+ unsigned long tmp = a >> 16; \
+ a &= 0xffffUL; \
+ a += (tmp << 4) - tmp; \
+ } while (0)
+# define MOD28(a) \
+ do { \
+ CHOP(a); \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+# define MOD(a) \
+ do { \
+ CHOP(a); \
+ MOD28(a); \
+ } while (0)
+# define MOD63(a) \
+ do { /* this assumes a is not negative */ \
+ z_off64_t tmp = a >> 32; \
+ a &= 0xffffffffL; \
+ a += (tmp << 8) - (tmp << 5) + tmp; \
+ tmp = a >> 16; \
+ a &= 0xffffL; \
+ a += (tmp << 4) - tmp; \
+ tmp = a >> 16; \
+ a &= 0xffffL; \
+ a += (tmp << 4) - tmp; \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
+#else
+# define MOD(a) a %= BASE
+# define MOD28(a) a %= BASE
+# define MOD63(a) a %= BASE
+#endif
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+ uLong adler;
+ const Bytef *buf;
+ uInt len;
+{
+ unsigned long sum2;
+ unsigned n;
+
+ /* split Adler-32 into component sums */
+ sum2 = (adler >> 16) & 0xffff;
+ adler &= 0xffff;
+
+ /* in case user likes doing a byte at a time, keep it fast */
+ if (len == 1) {
+ adler += buf[0];
+ if (adler >= BASE)
+ adler -= BASE;
+ sum2 += adler;
+ if (sum2 >= BASE)
+ sum2 -= BASE;
+ return adler | (sum2 << 16);
+ }
+
+ /* initial Adler-32 value (deferred check for len == 1 speed) */
+ if (buf == Z_NULL)
+ return 1L;
+
+ /* in case short lengths are provided, keep it somewhat fast */
+ if (len < 16) {
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ if (adler >= BASE)
+ adler -= BASE;
+ MOD28(sum2); /* only added so many BASE's */
+ return adler | (sum2 << 16);
+ }
+
+ /* do length NMAX blocks -- requires just one modulo operation */
+ while (len >= NMAX) {
+ len -= NMAX;
+ n = NMAX / 16; /* NMAX is divisible by 16 */
+ do {
+ DO16(buf); /* 16 sums unrolled */
+ buf += 16;
+ } while (--n);
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* do remaining bytes (less than NMAX, still just one modulo) */
+ if (len) { /* avoid modulos if none remaining */
+ while (len >= 16) {
+ len -= 16;
+ DO16(buf);
+ buf += 16;
+ }
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ MOD(adler);
+ MOD(sum2);
+ }
+
+ /* return recombined sums */
+ return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off64_t len2;
+{
+ unsigned long sum1;
+ unsigned long sum2;
+ unsigned rem;
+
+ /* for negative len, return invalid adler32 as a clue for debugging */
+ if (len2 < 0)
+ return 0xffffffffUL;
+
+ /* the derivation of this formula is left as an exercise for the reader */
+ MOD63(len2); /* assumes len2 >= 0 */
+ rem = (unsigned)len2;
+ sum1 = adler1 & 0xffff;
+ sum2 = rem * sum1;
+ MOD(sum2);
+ sum1 += (adler2 & 0xffff) + BASE - 1;
+ sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+ if (sum2 >= BASE) sum2 -= BASE;
+ return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off_t len2;
+{
+ return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off64_t len2;
+{
+ return adler32_combine_(adler1, adler2, len2);
+}
--- /dev/null
+/* deflate.c -- compress data using the deflation algorithm
+ * Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * ALGORITHM
+ *
+ * The "deflation" process depends on being able to identify portions
+ * of the input text which are identical to earlier input (within a
+ * sliding window trailing behind the input currently being processed).
+ *
+ * The most straightforward technique turns out to be the fastest for
+ * most input files: try all possible matches and select the longest.
+ * The key feature of this algorithm is that insertions into the string
+ * dictionary are very simple and thus fast, and deletions are avoided
+ * completely. Insertions are performed at each input character, whereas
+ * string matches are performed only when the previous match ends. So it
+ * is preferable to spend more time in matches to allow very fast string
+ * insertions and avoid deletions. The matching algorithm for small
+ * strings is inspired from that of Rabin & Karp. A brute force approach
+ * is used to find longer strings when a small match has been found.
+ * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
+ * (by Leonid Broukhis).
+ * A previous version of this file used a more sophisticated algorithm
+ * (by Fiala and Greene) which is guaranteed to run in linear amortized
+ * time, but has a larger average cost, uses more memory and is patented.
+ * However the F&G algorithm may be faster for some highly redundant
+ * files if the parameter max_chain_length (described below) is too large.
+ *
+ * ACKNOWLEDGEMENTS
+ *
+ * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
+ * I found it in 'freeze' written by Leonid Broukhis.
+ * Thanks to many people for bug reports and testing.
+ *
+ * REFERENCES
+ *
+ * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
+ * Available in http://tools.ietf.org/html/rfc1951
+ *
+ * A description of the Rabin and Karp algorithm is given in the book
+ * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
+ *
+ * Fiala,E.R., and Greene,D.H.
+ * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
+ *
+ */
+
+/* @(#) $Id$ */
+
+#include "deflate.h"
+
+const char deflate_copyright[] =
+ " deflate 1.2.8.f-Proxmark3 Copyright 1995-2013 Jean-loup Gailly and Mark Adler ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+
+//-----------------------------------------------------------------------------
+// This version of zlib is modified for use within the Proxmark3 project.
+// Files from the original distribution which are not required for this
+// purpose are not included. All modifications can easily be found
+// by searching for #ifdef ZLIB_PM3_TUNED and #ifndef ZLIB_PM3_TUNED.
+//-----------------------------------------------------------------------------
+
+
+
+/* ===========================================================================
+ * Function prototypes.
+ */
+typedef enum {
+ need_more, /* block not completed, need more input or more output */
+ block_done, /* block flush performed */
+ finish_started, /* finish started, need only more output at next deflate */
+ finish_done /* finish done, accept no more input or output */
+} block_state;
+
+typedef block_state (*compress_func) OF((deflate_state *s, int flush));
+/* Compression function. Returns the block state after the call. */
+
+local void fill_window OF((deflate_state *s));
+local block_state deflate_stored OF((deflate_state *s, int flush));
+local block_state deflate_fast OF((deflate_state *s, int flush));
+#ifndef FASTEST
+local block_state deflate_slow OF((deflate_state *s, int flush));
+#endif
+local block_state deflate_rle OF((deflate_state *s, int flush));
+local block_state deflate_huff OF((deflate_state *s, int flush));
+local void lm_init OF((deflate_state *s));
+local void putShortMSB OF((deflate_state *s, uInt b));
+local void flush_pending OF((z_streamp strm));
+local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
+#ifdef ASMV
+ void match_init OF((void)); /* asm code initialization */
+ uInt longest_match OF((deflate_state *s, IPos cur_match));
+#else
+local uInt longest_match OF((deflate_state *s, IPos cur_match));
+#endif
+
+#ifdef DEBUG
+local void check_match OF((deflate_state *s, IPos start, IPos match,
+ int length));
+#endif
+
+/* ===========================================================================
+ * Local data
+ */
+
+#define NIL 0
+/* Tail of hash chains */
+
+#ifndef TOO_FAR
+# define TOO_FAR 4096
+#endif
+/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+typedef struct config_s {
+ ush good_length; /* reduce lazy search above this match length */
+ ush max_lazy; /* do not perform lazy search above this match length */
+ ush nice_length; /* quit search above this match length */
+ ush max_chain;
+ compress_func func;
+} config;
+
+#ifdef FASTEST
+local const config configuration_table[2] = {
+/* good lazy nice chain */
+/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
+/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */
+#else
+local const config configuration_table[10] = {
+/* good lazy nice chain */
+/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
+/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */
+/* 2 */ {4, 5, 16, 8, deflate_fast},
+/* 3 */ {4, 6, 32, 32, deflate_fast},
+
+/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
+/* 5 */ {8, 16, 32, 32, deflate_slow},
+/* 6 */ {8, 16, 128, 128, deflate_slow},
+/* 7 */ {8, 32, 128, 256, deflate_slow},
+/* 8 */ {32, 128, 258, 1024, deflate_slow},
+/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
+#endif
+
+/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
+ * meaning.
+ */
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
+#ifndef NO_DUMMY_DECL
+struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
+#endif
+
+/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
+#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0))
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN assertion: all calls to to UPDATE_HASH are made with consecutive
+ * input characters, so that a running hash key can be computed from the
+ * previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
+
+
+/* ===========================================================================
+ * Insert string str in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
+ * IN assertion: all calls to to INSERT_STRING are made with consecutive
+ * input characters and the first MIN_MATCH bytes of str are valid
+ * (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+ match_head = s->head[s->ins_h], \
+ s->head[s->ins_h] = (Pos)(str))
+#else
+#define INSERT_STRING(s, str, match_head) \
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+ match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
+ s->head[s->ins_h] = (Pos)(str))
+#endif
+
+/* ===========================================================================
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+#define CLEAR_HASH(s) \
+ s->head[s->hash_size-1] = NIL; \
+ zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+
+/* ========================================================================= */
+int ZEXPORT deflateInit_(strm, level, version, stream_size)
+ z_streamp strm;
+ int level;
+ const char *version;
+ int stream_size;
+{
+ return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
+ Z_DEFAULT_STRATEGY, version, stream_size);
+ /* To do: ignore strm->next_in if we use it as window */
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+ version, stream_size)
+ z_streamp strm;
+ int level;
+ int method;
+ int windowBits;
+ int memLevel;
+ int strategy;
+ const char *version;
+ int stream_size;
+{
+ deflate_state *s;
+ int wrap = 1;
+ static const char my_version[] = ZLIB_VERSION;
+
+ ushf *overlay;
+ /* We overlay pending_buf and d_buf+l_buf. This works since the average
+ * output size for (length,distance) codes is <= 24 bits.
+ */
+
+ if (version == Z_NULL || version[0] != my_version[0] ||
+ stream_size != sizeof(z_stream)) {
+ return Z_VERSION_ERROR;
+ }
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
+
+ strm->msg = Z_NULL;
+ if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+#endif
+ }
+ if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zfree = zcfree;
+#endif
+
+#ifdef FASTEST
+ if (level != 0) level = 1;
+#else
+ if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+
+ if (windowBits < 0) { /* suppress zlib wrapper */
+ wrap = 0;
+ windowBits = -windowBits;
+ }
+#ifdef GZIP
+ else if (windowBits > 15) {
+ wrap = 2; /* write gzip wrapper instead */
+ windowBits -= 16;
+ }
+#endif
+ if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
+ windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
+ strategy < 0 || strategy > Z_FIXED) {
+ return Z_STREAM_ERROR;
+ }
+ if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */
+ s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
+ if (s == Z_NULL) return Z_MEM_ERROR;
+ strm->state = (struct internal_state FAR *)s;
+ s->strm = strm;
+
+ s->wrap = wrap;
+ s->gzhead = Z_NULL;
+ s->w_bits = windowBits;
+ s->w_size = 1 << s->w_bits;
+ s->w_mask = s->w_size - 1;
+
+ s->hash_bits = memLevel + 7;
+ s->hash_size = 1 << s->hash_bits;
+ s->hash_mask = s->hash_size - 1;
+ s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
+
+ s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
+ s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
+ s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
+
+ s->high_water = 0; /* nothing written to s->window yet */
+
+ s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
+
+ overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
+ s->pending_buf = (uchf *) overlay;
+ s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
+
+ if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
+ s->pending_buf == Z_NULL) {
+ s->status = FINISH_STATE;
+ strm->msg = ERR_MSG(Z_MEM_ERROR);
+ deflateEnd (strm);
+ return Z_MEM_ERROR;
+ }
+ s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
+ s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
+
+ s->level = level;
+ s->strategy = strategy;
+ s->method = (Byte)method;
+
+ return deflateReset(strm);
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
+ z_streamp strm;
+ const Bytef *dictionary;
+ uInt dictLength;
+{
+ deflate_state *s;
+ uInt str, n;
+ int wrap;
+ unsigned avail;
+ z_const unsigned char *next;
+
+ if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
+ return Z_STREAM_ERROR;
+ s = strm->state;
+ wrap = s->wrap;
+ if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead)
+ return Z_STREAM_ERROR;
+
+ /* when using zlib wrappers, compute Adler-32 for provided dictionary */
+ if (wrap == 1)
+ strm->adler = adler32(strm->adler, dictionary, dictLength);
+ s->wrap = 0; /* avoid computing Adler-32 in read_buf */
+
+ /* if dictionary would fill window, just replace the history */
+ if (dictLength >= s->w_size) {
+ if (wrap == 0) { /* already empty otherwise */
+ CLEAR_HASH(s);
+ s->strstart = 0;
+ s->block_start = 0L;
+ s->insert = 0;
+ }
+ dictionary += dictLength - s->w_size; /* use the tail */
+ dictLength = s->w_size;
+ }
+
+ /* insert dictionary into window and hash */
+ avail = strm->avail_in;
+ next = strm->next_in;
+ strm->avail_in = dictLength;
+ strm->next_in = (z_const Bytef *)dictionary;
+ fill_window(s);
+ while (s->lookahead >= MIN_MATCH) {
+ str = s->strstart;
+ n = s->lookahead - (MIN_MATCH-1);
+ do {
+ UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
+#ifndef FASTEST
+ s->prev[str & s->w_mask] = s->head[s->ins_h];
+#endif
+ s->head[s->ins_h] = (Pos)str;
+ str++;
+ } while (--n);
+ s->strstart = str;
+ s->lookahead = MIN_MATCH-1;
+ fill_window(s);
+ }
+ s->strstart += s->lookahead;
+ s->block_start = (long)s->strstart;
+ s->insert = s->lookahead;
+ s->lookahead = 0;
+ s->match_length = s->prev_length = MIN_MATCH-1;
+ s->match_available = 0;
+ strm->next_in = next;
+ strm->avail_in = avail;
+ s->wrap = wrap;
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateResetKeep (strm)
+ z_streamp strm;
+{
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL ||
+ strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
+ return Z_STREAM_ERROR;
+ }
+
+ strm->total_in = strm->total_out = 0;
+ strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
+ strm->data_type = Z_UNKNOWN;
+
+ s = (deflate_state *)strm->state;
+ s->pending = 0;
+ s->pending_out = s->pending_buf;
+
+ if (s->wrap < 0) {
+ s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
+ }
+ s->status = s->wrap ? INIT_STATE : BUSY_STATE;
+ strm->adler =
+#ifdef GZIP
+ s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
+#endif
+ adler32(0L, Z_NULL, 0);
+ s->last_flush = Z_NO_FLUSH;
+
+ _tr_init(s);
+
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateReset (strm)
+ z_streamp strm;
+{
+ int ret;
+
+ ret = deflateResetKeep(strm);
+ if (ret == Z_OK)
+ lm_init(strm->state);
+ return ret;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetHeader (strm, head)
+ z_streamp strm;
+ gz_headerp head;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+ strm->state->gzhead = head;
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflatePending (strm, pending, bits)
+ unsigned *pending;
+ int *bits;
+ z_streamp strm;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ if (pending != Z_NULL)
+ *pending = strm->state->pending;
+ if (bits != Z_NULL)
+ *bits = strm->state->bi_valid;
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflatePrime (strm, bits, value)
+ z_streamp strm;
+ int bits;
+ int value;
+{
+ deflate_state *s;
+ int put;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+ if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
+ return Z_BUF_ERROR;
+ do {
+ put = Buf_size - s->bi_valid;
+ if (put > bits)
+ put = bits;
+ s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid);
+ s->bi_valid += put;
+ _tr_flush_bits(s);
+ value >>= put;
+ bits -= put;
+ } while (bits);
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateParams(strm, level, strategy)
+ z_streamp strm;
+ int level;
+ int strategy;
+{
+ deflate_state *s;
+ compress_func func;
+ int err = Z_OK;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+
+#ifdef FASTEST
+ if (level != 0) level = 1;
+#else
+ if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+ if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
+ return Z_STREAM_ERROR;
+ }
+ func = configuration_table[s->level].func;
+
+ if ((strategy != s->strategy || func != configuration_table[level].func) &&
+ strm->total_in != 0) {
+ /* Flush the last buffer: */
+ err = deflate(strm, Z_BLOCK);
+ if (err == Z_BUF_ERROR && s->pending == 0)
+ err = Z_OK;
+ }
+ if (s->level != level) {
+ s->level = level;
+ s->max_lazy_match = configuration_table[level].max_lazy;
+ s->good_match = configuration_table[level].good_length;
+ s->nice_match = configuration_table[level].nice_length;
+ s->max_chain_length = configuration_table[level].max_chain;
+ }
+ s->strategy = strategy;
+ return err;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
+ z_streamp strm;
+ int good_length;
+ int max_lazy;
+ int nice_length;
+ int max_chain;
+{
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+ s->good_match = good_length;
+ s->max_lazy_match = max_lazy;
+ s->nice_match = nice_length;
+ s->max_chain_length = max_chain;
+ return Z_OK;
+}
+
+/* =========================================================================
+ * For the default windowBits of 15 and memLevel of 8, this function returns
+ * a close to exact, as well as small, upper bound on the compressed size.
+ * They are coded as constants here for a reason--if the #define's are
+ * changed, then this function needs to be changed as well. The return
+ * value for 15 and 8 only works for those exact settings.
+ *
+ * For any setting other than those defaults for windowBits and memLevel,
+ * the value returned is a conservative worst case for the maximum expansion
+ * resulting from using fixed blocks instead of stored blocks, which deflate
+ * can emit on compressed data for some combinations of the parameters.
+ *
+ * This function could be more sophisticated to provide closer upper bounds for
+ * every combination of windowBits and memLevel. But even the conservative
+ * upper bound of about 14% expansion does not seem onerous for output buffer
+ * allocation.
+ */
+uLong ZEXPORT deflateBound(strm, sourceLen)
+ z_streamp strm;
+ uLong sourceLen;
+{
+ deflate_state *s;
+ uLong complen, wraplen;
+ Bytef *str;
+
+ /* conservative upper bound for compressed data */
+ complen = sourceLen +
+ ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
+
+ /* if can't get parameters, return conservative bound plus zlib wrapper */
+ if (strm == Z_NULL || strm->state == Z_NULL)
+ return complen + 6;
+
+ /* compute wrapper length */
+ s = strm->state;
+ switch (s->wrap) {
+ case 0: /* raw deflate */
+ wraplen = 0;
+ break;
+ case 1: /* zlib wrapper */
+ wraplen = 6 + (s->strstart ? 4 : 0);
+ break;
+ case 2: /* gzip wrapper */
+ wraplen = 18;
+ if (s->gzhead != Z_NULL) { /* user-supplied gzip header */
+ if (s->gzhead->extra != Z_NULL)
+ wraplen += 2 + s->gzhead->extra_len;
+ str = s->gzhead->name;
+ if (str != Z_NULL)
+ do {
+ wraplen++;
+ } while (*str++);
+ str = s->gzhead->comment;
+ if (str != Z_NULL)
+ do {
+ wraplen++;
+ } while (*str++);
+ if (s->gzhead->hcrc)
+ wraplen += 2;
+ }
+ break;
+ default: /* for compiler happiness */
+ wraplen = 6;
+ }
+
+ /* if not default parameters, return conservative bound */
+ if (s->w_bits != 15 || s->hash_bits != 8 + 7)
+ return complen + wraplen;
+
+ /* default settings: return tight bound for that case */
+ return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+ (sourceLen >> 25) + 13 - 6 + wraplen;
+}
+
+/* =========================================================================
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
+ * IN assertion: the stream state is correct and there is enough room in
+ * pending_buf.
+ */
+local void putShortMSB (s, b)
+ deflate_state *s;
+ uInt b;
+{
+ put_byte(s, (Byte)(b >> 8));
+ put_byte(s, (Byte)(b & 0xff));
+}
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+local void flush_pending(strm)
+ z_streamp strm;
+{
+ unsigned len;
+ deflate_state *s = strm->state;
+
+ _tr_flush_bits(s);
+ len = s->pending;
+ if (len > strm->avail_out) len = strm->avail_out;
+ if (len == 0) return;
+
+ zmemcpy(strm->next_out, s->pending_out, len);
+ strm->next_out += len;
+ s->pending_out += len;
+ strm->total_out += len;
+ strm->avail_out -= len;
+ s->pending -= len;
+ if (s->pending == 0) {
+ s->pending_out = s->pending_buf;
+ }
+}
+
+/* ========================================================================= */
+int ZEXPORT deflate (strm, flush)
+ z_streamp strm;
+ int flush;
+{
+ int old_flush; /* value of flush param for previous deflate call */
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL ||
+ flush > Z_BLOCK || flush < 0) {
+ return Z_STREAM_ERROR;
+ }
+ s = strm->state;
+
+ if (strm->next_out == Z_NULL ||
+ (strm->next_in == Z_NULL && strm->avail_in != 0) ||
+ (s->status == FINISH_STATE && flush != Z_FINISH)) {
+ ERR_RETURN(strm, Z_STREAM_ERROR);
+ }
+ if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
+
+ s->strm = strm; /* just in case */
+ old_flush = s->last_flush;
+ s->last_flush = flush;
+
+ /* Write the header */
+ if (s->status == INIT_STATE) {
+#ifdef GZIP
+ if (s->wrap == 2) {
+ strm->adler = crc32(0L, Z_NULL, 0);
+ put_byte(s, 31);
+ put_byte(s, 139);
+ put_byte(s, 8);
+ if (s->gzhead == Z_NULL) {
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, OS_CODE);
+ s->status = BUSY_STATE;
+ }
+ else {
+ put_byte(s, (s->gzhead->text ? 1 : 0) +
+ (s->gzhead->hcrc ? 2 : 0) +
+ (s->gzhead->extra == Z_NULL ? 0 : 4) +
+ (s->gzhead->name == Z_NULL ? 0 : 8) +
+ (s->gzhead->comment == Z_NULL ? 0 : 16)
+ );
+ put_byte(s, (Byte)(s->gzhead->time & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, s->gzhead->os & 0xff);
+ if (s->gzhead->extra != Z_NULL) {
+ put_byte(s, s->gzhead->extra_len & 0xff);
+ put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
+ }
+ if (s->gzhead->hcrc)
+ strm->adler = crc32(strm->adler, s->pending_buf,
+ s->pending);
+ s->gzindex = 0;
+ s->status = EXTRA_STATE;
+ }
+ }
+ else
+#endif
+ {
+ uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+ uInt level_flags;
+
+ if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
+ level_flags = 0;
+ else if (s->level < 6)
+ level_flags = 1;
+ else if (s->level == 6)
+ level_flags = 2;
+ else
+ level_flags = 3;
+ header |= (level_flags << 6);
+ if (s->strstart != 0) header |= PRESET_DICT;
+ header += 31 - (header % 31);
+
+ s->status = BUSY_STATE;
+ putShortMSB(s, header);
+
+ /* Save the adler32 of the preset dictionary: */
+ if (s->strstart != 0) {
+ putShortMSB(s, (uInt)(strm->adler >> 16));
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
+ }
+ strm->adler = adler32(0L, Z_NULL, 0);
+ }
+ }
+#ifdef GZIP
+ if (s->status == EXTRA_STATE) {
+ if (s->gzhead->extra != Z_NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+
+ while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size)
+ break;
+ }
+ put_byte(s, s->gzhead->extra[s->gzindex]);
+ s->gzindex++;
+ }
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (s->gzindex == s->gzhead->extra_len) {
+ s->gzindex = 0;
+ s->status = NAME_STATE;
+ }
+ }
+ else
+ s->status = NAME_STATE;
+ }
+ if (s->status == NAME_STATE) {
+ if (s->gzhead->name != Z_NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->name[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0) {
+ s->gzindex = 0;
+ s->status = COMMENT_STATE;
+ }
+ }
+ else
+ s->status = COMMENT_STATE;
+ }
+ if (s->status == COMMENT_STATE) {
+ if (s->gzhead->comment != Z_NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->comment[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0)
+ s->status = HCRC_STATE;
+ }
+ else
+ s->status = HCRC_STATE;
+ }
+ if (s->status == HCRC_STATE) {
+ if (s->gzhead->hcrc) {
+ if (s->pending + 2 > s->pending_buf_size)
+ flush_pending(strm);
+ if (s->pending + 2 <= s->pending_buf_size) {
+ put_byte(s, (Byte)(strm->adler & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+ strm->adler = crc32(0L, Z_NULL, 0);
+ s->status = BUSY_STATE;
+ }
+ }
+ else
+ s->status = BUSY_STATE;
+ }
+#endif
+
+ /* Flush as much pending output as possible */
+ if (s->pending != 0) {
+ flush_pending(strm);
+ if (strm->avail_out == 0) {
+ /* Since avail_out is 0, deflate will be called again with
+ * more output space, but possibly with both pending and
+ * avail_in equal to zero. There won't be anything to do,
+ * but this is not an error situation so make sure we
+ * return OK instead of BUF_ERROR at next call of deflate:
+ */
+ s->last_flush = -1;
+ return Z_OK;
+ }
+
+ /* Make sure there is something to do and avoid duplicate consecutive
+ * flushes. For repeated and useless calls with Z_FINISH, we keep
+ * returning Z_STREAM_END instead of Z_BUF_ERROR.
+ */
+ } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
+ flush != Z_FINISH) {
+ ERR_RETURN(strm, Z_BUF_ERROR);
+ }
+
+ /* User must not provide more input after the first FINISH: */
+ if (s->status == FINISH_STATE && strm->avail_in != 0) {
+ ERR_RETURN(strm, Z_BUF_ERROR);
+ }
+
+ /* Start a new block or continue the current one.
+ */
+ if (strm->avail_in != 0 || s->lookahead != 0 ||
+ (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
+ block_state bstate;
+
+ bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
+ (s->strategy == Z_RLE ? deflate_rle(s, flush) :
+ (*(configuration_table[s->level].func))(s, flush));
+
+ if (bstate == finish_started || bstate == finish_done) {
+ s->status = FINISH_STATE;
+ }
+ if (bstate == need_more || bstate == finish_started) {
+ if (strm->avail_out == 0) {
+ s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
+ }
+ return Z_OK;
+ /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+ * of deflate should use the same flush parameter to make sure
+ * that the flush is complete. So we don't have to output an
+ * empty block here, this will be done at next call. This also
+ * ensures that for a very small output buffer, we emit at most
+ * one empty block.
+ */
+ }
+ if (bstate == block_done) {
+ if (flush == Z_PARTIAL_FLUSH) {
+ _tr_align(s);
+ } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
+ _tr_stored_block(s, (char*)0, 0L, 0);
+ /* For a full flush, this empty block will be recognized
+ * as a special marker by inflate_sync().
+ */
+ if (flush == Z_FULL_FLUSH) {
+ CLEAR_HASH(s); /* forget history */
+ if (s->lookahead == 0) {
+ s->strstart = 0;
+ s->block_start = 0L;
+ s->insert = 0;
+ }
+ }
+ }
+ flush_pending(strm);
+ if (strm->avail_out == 0) {
+ s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+ return Z_OK;
+ }
+ }
+ }
+ Assert(strm->avail_out > 0, "bug2");
+
+ if (flush != Z_FINISH) return Z_OK;
+ if (s->wrap <= 0) return Z_STREAM_END;
+
+ /* Write the trailer */
+#ifdef GZIP
+ if (s->wrap == 2) {
+ put_byte(s, (Byte)(strm->adler & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
+ put_byte(s, (Byte)(strm->total_in & 0xff));
+ put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
+ put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
+ put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
+ }
+ else
+#endif
+ {
+ putShortMSB(s, (uInt)(strm->adler >> 16));
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
+ }
+ flush_pending(strm);
+ /* If avail_out is zero, the application will call deflate again
+ * to flush the rest.
+ */
+ if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
+ return s->pending != 0 ? Z_OK : Z_STREAM_END;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateEnd (strm)
+ z_streamp strm;
+{
+ int status;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+
+ status = strm->state->status;
+ if (status != INIT_STATE &&
+ status != EXTRA_STATE &&
+ status != NAME_STATE &&
+ status != COMMENT_STATE &&
+ status != HCRC_STATE &&
+ status != BUSY_STATE &&
+ status != FINISH_STATE) {
+ return Z_STREAM_ERROR;
+ }
+
+ /* Deallocate in reverse order of allocations: */
+ TRY_FREE(strm, strm->state->pending_buf);
+ TRY_FREE(strm, strm->state->head);
+ TRY_FREE(strm, strm->state->prev);
+ TRY_FREE(strm, strm->state->window);
+
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+
+ return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+}
+
+/* =========================================================================
+ * Copy the source state to the destination state.
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
+ * doesn't have enough memory anyway to duplicate compression states).
+ */
+int ZEXPORT deflateCopy (dest, source)
+ z_streamp dest;
+ z_streamp source;
+{
+#ifdef MAXSEG_64K
+ return Z_STREAM_ERROR;
+#else
+ deflate_state *ds;
+ deflate_state *ss;
+ ushf *overlay;
+
+
+ if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+ return Z_STREAM_ERROR;
+ }
+
+ ss = source->state;
+
+ zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+
+ ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
+ if (ds == Z_NULL) return Z_MEM_ERROR;
+ dest->state = (struct internal_state FAR *) ds;
+ zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state));
+ ds->strm = dest;
+
+ ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
+ ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos));
+ ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos));
+ overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
+ ds->pending_buf = (uchf *) overlay;
+
+ if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
+ ds->pending_buf == Z_NULL) {
+ deflateEnd (dest);
+ return Z_MEM_ERROR;
+ }
+ /* following zmemcpy do not work for 16-bit MSDOS */
+ zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+ zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos));
+ zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos));
+ zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+ ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+ ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+ ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+ ds->l_desc.dyn_tree = ds->dyn_ltree;
+ ds->d_desc.dyn_tree = ds->dyn_dtree;
+ ds->bl_desc.dyn_tree = ds->bl_tree;
+
+ return Z_OK;
+#endif /* MAXSEG_64K */
+}
+
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read. All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->next_in buffer and copying from it.
+ * (See also flush_pending()).
+ */
+local int read_buf(strm, buf, size)
+ z_streamp strm;
+ Bytef *buf;
+ unsigned size;
+{
+ unsigned len = strm->avail_in;
+
+ if (len > size) len = size;
+ if (len == 0) return 0;
+
+ strm->avail_in -= len;
+
+ zmemcpy(buf, strm->next_in, len);
+ if (strm->state->wrap == 1) {
+ strm->adler = adler32(strm->adler, buf, len);
+ }
+#ifdef GZIP
+ else if (strm->state->wrap == 2) {
+ strm->adler = crc32(strm->adler, buf, len);
+ }
+#endif
+ strm->next_in += len;
+ strm->total_in += len;
+
+ return (int)len;
+}
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+local void lm_init (s)
+ deflate_state *s;
+{
+ s->window_size = (ulg)2L*s->w_size;
+
+ CLEAR_HASH(s);
+
+ /* Set the default configuration parameters:
+ */
+ s->max_lazy_match = configuration_table[s->level].max_lazy;
+ s->good_match = configuration_table[s->level].good_length;
+ s->nice_match = configuration_table[s->level].nice_length;
+ s->max_chain_length = configuration_table[s->level].max_chain;
+
+ s->strstart = 0;
+ s->block_start = 0L;
+ s->lookahead = 0;
+ s->insert = 0;
+ s->match_length = s->prev_length = MIN_MATCH-1;
+ s->match_available = 0;
+ s->ins_h = 0;
+#ifndef FASTEST
+#ifdef ASMV
+ match_init(); /* initialize the asm code */
+#endif
+#endif
+}
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ * OUT assertion: the match length is not greater than s->lookahead.
+ */
+#ifndef ASMV
+/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
+ * match.S. The code will be functionally equivalent.
+ */
+local uInt longest_match(s, cur_match)
+ deflate_state *s;
+ IPos cur_match; /* current match */
+{
+ unsigned chain_length = s->max_chain_length;/* max hash chain length */
+ register Bytef *scan = s->window + s->strstart; /* current string */
+ register Bytef *match; /* matched string */
+ register int len; /* length of current match */
+#ifdef ZLIB_PM3_TUNED
+ int best_len = MIN_MATCH-1; // lift the restriction on prev-length
+#else
+ int best_len = s->prev_length; /* best match length so far */
+#endif
+ int nice_match = s->nice_match; /* stop if match long enough */
+ IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+ s->strstart - (IPos)MAX_DIST(s) : NIL;
+ /* Stop when cur_match becomes <= limit. To simplify the code,
+ * we prevent matches with the string of window index 0.
+ */
+ Posf *prev = s->prev;
+ uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+ /* Compare two bytes at a time. Note: this is not always beneficial.
+ * Try with and without -DUNALIGNED_OK to check.
+ */
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+ register ush scan_start = *(ushf*)scan;
+ register ush scan_end = *(ushf*)(scan+best_len-1);
+#else
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+ register Byte scan_end1 = scan[best_len-1];
+ register Byte scan_end = scan[best_len];
+#endif
+
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ * It is easy to get rid of this optimization if necessary.
+ */
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+ /* Do not waste too much time if we already have a good match: */
+ if (s->prev_length >= s->good_match) {
+ chain_length >>= 2;
+ }
+ /* Do not look for matches beyond the end of the input. This is necessary
+ * to make deflate deterministic.
+ */
+ if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+ do {
+ Assert(cur_match < s->strstart, "no future");
+ match = s->window + cur_match;
+
+ /* Skip to next match if the match length cannot increase
+ * or if the match length is less than 2. Note that the checks below
+ * for insufficient lookahead only occur occasionally for performance
+ * reasons. Therefore uninitialized memory will be accessed, and
+ * conditional jumps will be made that depend on those values.
+ * However the length of the match is limited to the lookahead, so
+ * the output of deflate is not affected by the uninitialized values.
+ */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+ /* This code assumes sizeof(unsigned short) == 2. Do not use
+ * UNALIGNED_OK if your compiler uses a different size.
+ */
+ if (*(ushf*)(match+best_len-1) != scan_end ||
+ *(ushf*)match != scan_start) continue;
+
+ /* It is not necessary to compare scan[2] and match[2] since they are
+ * always equal when the other bytes match, given that the hash keys
+ * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+ * strstart+3, +5, ... up to strstart+257. We check for insufficient
+ * lookahead only every 4th comparison; the 128th check will be made
+ * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+ * necessary to put more guard bytes at the end of the window, or
+ * to check more often for insufficient lookahead.
+ */
+ Assert(scan[2] == match[2], "scan[2]?");
+ scan++, match++;
+ do {
+ } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ scan < strend);
+ /* The funny "do {}" generates better code on most compilers */
+
+ /* Here, scan <= window+strstart+257 */
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+ if (*scan == *match) scan++;
+
+ len = (MAX_MATCH - 1) - (int)(strend-scan);
+ scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+ if (match[best_len] != scan_end ||
+ match[best_len-1] != scan_end1 ||
+ *match != *scan ||
+ *++match != scan[1]) continue;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match++;
+ Assert(*scan == *match, "match[2]?");
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+ scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+ if (len > best_len) {
+ s->match_start = cur_match;
+ best_len = len;
+ if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+ scan_end = *(ushf*)(scan+best_len-1);
+#else
+ scan_end1 = scan[best_len-1];
+ scan_end = scan[best_len];
+#endif
+ }
+ } while ((cur_match = prev[cur_match & wmask]) > limit
+ && --chain_length != 0);
+
+ if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+ return s->lookahead;
+}
+#endif /* ASMV */
+
+#else /* FASTEST */
+
+/* ---------------------------------------------------------------------------
+ * Optimized version for FASTEST only
+ */
+local uInt longest_match(s, cur_match)
+ deflate_state *s;
+ IPos cur_match; /* current match */
+{
+ register Bytef *scan = s->window + s->strstart; /* current string */
+ register Bytef *match; /* matched string */
+ register int len; /* length of current match */
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ * It is easy to get rid of this optimization if necessary.
+ */
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+ Assert(cur_match < s->strstart, "no future");
+
+ match = s->window + cur_match;
+
+ /* Return failure if the match length is less than 2:
+ */
+ if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match += 2;
+ Assert(*scan == *match, "match[2]?");
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+
+ if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+ s->match_start = cur_match;
+ return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
+}
+
+#endif /* FASTEST */
+
+#ifdef DEBUG
+/* ===========================================================================
+ * Check that the match at match_start is indeed a match.
+ */
+local void check_match(s, start, match, length)
+ deflate_state *s;
+ IPos start, match;
+ int length;
+{
+ /* check that the match is indeed a match */
+ if (zmemcmp(s->window + match,
+ s->window + start, length) != EQUAL) {
+ fprintf(stderr, " start %u, match %u, length %d\n",
+ start, match, length);
+ do {
+ fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
+ } while (--length != 0);
+ z_error("invalid match");
+ }
+ if (z_verbose > 1) {
+ fprintf(stderr,"\\[%d,%d]", start-match, length);
+ do { putc(s->window[start++], stderr); } while (--length != 0);
+ }
+}
+#else
+# define check_match(s, start, match, length)
+#endif /* DEBUG */
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ * At least one byte has been read, or avail_in == 0; reads are
+ * performed for at least two bytes (required for the zip translate_eol
+ * option -- not supported here).
+ */
+local void fill_window(s)
+ deflate_state *s;
+{
+ register unsigned n, m;
+ register Posf *p;
+ unsigned more; /* Amount of free space at the end of the window. */
+ uInt wsize = s->w_size;
+
+ Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
+
+ do {
+ more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+ /* Deal with !@#$% 64K limit: */
+ if (sizeof(int) <= 2) {
+ if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+ more = wsize;
+
+ } else if (more == (unsigned)(-1)) {
+ /* Very unlikely, but possible on 16 bit machine if
+ * strstart == 0 && lookahead == 1 (input done a byte at time)
+ */
+ more--;
+ }
+ }
+
+ /* If the window is almost full and there is insufficient lookahead,
+ * move the upper half to the lower one to make room in the upper half.
+ */
+ if (s->strstart >= wsize+MAX_DIST(s)) {
+
+ zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+ s->match_start -= wsize;
+ s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
+ s->block_start -= (long) wsize;
+
+ /* Slide the hash table (could be avoided with 32 bit values
+ at the expense of memory usage). We slide even when level == 0
+ to keep the hash table consistent if we switch back to level > 0
+ later. (Using level 0 permanently is not an optimal usage of
+ zlib, so we don't care about this pathological case.)
+ */
+ n = s->hash_size;
+ p = &s->head[n];
+ do {
+ m = *--p;
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
+ } while (--n);
+
+ n = wsize;
+#ifndef FASTEST
+ p = &s->prev[n];
+ do {
+ m = *--p;
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
+ /* If n is not on any hash chain, prev[n] is garbage but
+ * its value will never be used.
+ */
+ } while (--n);
+#endif
+ more += wsize;
+ }
+ if (s->strm->avail_in == 0) break;
+
+ /* If there was no sliding:
+ * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+ * more == window_size - lookahead - strstart
+ * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+ * => more >= window_size - 2*WSIZE + 2
+ * In the BIG_MEM or MMAP case (not yet supported),
+ * window_size == input_size + MIN_LOOKAHEAD &&
+ * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+ * Otherwise, window_size == 2*WSIZE so more >= 2.
+ * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+ */
+ Assert(more >= 2, "more < 2");
+
+ n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+ s->lookahead += n;
+
+ /* Initialize the hash value now that we have some input: */
+ if (s->lookahead + s->insert >= MIN_MATCH) {
+ uInt str = s->strstart - s->insert;
+ s->ins_h = s->window[str];
+ UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
+#if MIN_MATCH != 3
+ Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+ while (s->insert) {
+ UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
+#ifndef FASTEST
+ s->prev[str & s->w_mask] = s->head[s->ins_h];
+#endif
+ s->head[s->ins_h] = (Pos)str;
+ str++;
+ s->insert--;
+ if (s->lookahead + s->insert < MIN_MATCH)
+ break;
+ }
+ }
+ /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+ * but this is not important since only literal bytes will be emitted.
+ */
+
+ } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+
+ /* If the WIN_INIT bytes after the end of the current data have never been
+ * written, then zero those bytes in order to avoid memory check reports of
+ * the use of uninitialized (or uninitialised as Julian writes) bytes by
+ * the longest match routines. Update the high water mark for the next
+ * time through here. WIN_INIT is set to MAX_MATCH since the longest match
+ * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
+ */
+ if (s->high_water < s->window_size) {
+ ulg curr = s->strstart + (ulg)(s->lookahead);
+ ulg init;
+
+ if (s->high_water < curr) {
+ /* Previous high water mark below current data -- zero WIN_INIT
+ * bytes or up to end of window, whichever is less.
+ */
+ init = s->window_size - curr;
+ if (init > WIN_INIT)
+ init = WIN_INIT;
+ zmemzero(s->window + curr, (unsigned)init);
+ s->high_water = curr + init;
+ }
+ else if (s->high_water < (ulg)curr + WIN_INIT) {
+ /* High water mark at or above current data, but below current data
+ * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
+ * to end of window, whichever is less.
+ */
+ init = (ulg)curr + WIN_INIT - s->high_water;
+ if (init > s->window_size - s->high_water)
+ init = s->window_size - s->high_water;
+ zmemzero(s->window + s->high_water, (unsigned)init);
+ s->high_water += init;
+ }
+ }
+
+ Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
+ "not enough room for search");
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK_ONLY(s, last) { \
+ _tr_flush_block(s, (s->block_start >= 0L ? \
+ (charf *)&s->window[(unsigned)s->block_start] : \
+ (charf *)Z_NULL), \
+ (ulg)((long)s->strstart - s->block_start), \
+ (last)); \
+ s->block_start = s->strstart; \
+ flush_pending(s->strm); \
+ Tracev((stderr,"[FLUSH]")); \
+}
+
+/* Same but force premature exit if necessary. */
+#define FLUSH_BLOCK(s, last) { \
+ FLUSH_BLOCK_ONLY(s, last); \
+ if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
+}
+
+/* ===========================================================================
+ * Copy without compression as much as possible from the input stream, return
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
+ * only for the level=0 compression option.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
+ */
+local block_state deflate_stored(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+ * to pending_buf_size, and each stored block has a 5 byte header:
+ */
+ ulg max_block_size = 0xffff;
+ ulg max_start;
+
+ if (max_block_size > s->pending_buf_size - 5) {
+ max_block_size = s->pending_buf_size - 5;
+ }
+
+ /* Copy as much as possible from input to output: */
+ for (;;) {
+ /* Fill the window as much as possible: */
+ if (s->lookahead <= 1) {
+
+ Assert(s->strstart < s->w_size+MAX_DIST(s) ||
+ s->block_start >= (long)s->w_size, "slide too late");
+
+ fill_window(s);
+ if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+ Assert(s->block_start >= 0L, "block gone");
+
+ s->strstart += s->lookahead;
+ s->lookahead = 0;
+
+ /* Emit a stored block if pending_buf will be full: */
+ max_start = s->block_start + max_block_size;
+ if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
+ /* strstart == 0 is possible when wraparound on 16-bit machine */
+ s->lookahead = (uInt)(s->strstart - max_start);
+ s->strstart = (uInt)max_start;
+ FLUSH_BLOCK(s, 0);
+ }
+ /* Flush if we may have to slide, otherwise block_start may become
+ * negative and the data will be gone:
+ */
+ if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
+ FLUSH_BLOCK(s, 0);
+ }
+ }
+ s->insert = 0;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if ((long)s->strstart > s->block_start)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
+
+/* ===========================================================================
+ * Compress as much as possible from the input stream, return the current
+ * block state.
+ * This function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+local block_state deflate_fast(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ IPos hash_head; /* head of the hash chain */
+ int bflush; /* set if current block must be flushed */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (s->lookahead < MIN_LOOKAHEAD) {
+ fill_window(s);
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ hash_head = NIL;
+ if (s->lookahead >= MIN_MATCH) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+
+ /* Find the longest match, discarding those <= prev_length.
+ * At this point we have always match_length < MIN_MATCH
+ */
+ if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ s->match_length = longest_match (s, hash_head);
+ /* longest_match() sets match_start */
+ }
+ if (s->match_length >= MIN_MATCH) {
+ check_match(s, s->strstart, s->match_start, s->match_length);
+
+ _tr_tally_dist(s, s->strstart - s->match_start,
+ s->match_length - MIN_MATCH, bflush);
+
+ s->lookahead -= s->match_length;
+
+ /* Insert new strings in the hash table only if the match length
+ * is not too large. This saves time but degrades compression.
+ */
+#ifndef FASTEST
+ if (s->match_length <= s->max_insert_length &&
+ s->lookahead >= MIN_MATCH) {
+ s->match_length--; /* string at strstart already in table */
+ do {
+ s->strstart++;
+ INSERT_STRING(s, s->strstart, hash_head);
+ /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+ * always MIN_MATCH bytes ahead.
+ */
+ } while (--s->match_length != 0);
+ s->strstart++;
+ } else
+#endif
+ {
+ s->strstart += s->match_length;
+ s->match_length = 0;
+ s->ins_h = s->window[s->strstart];
+ UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+ Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+ /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
+ * matter since it will be recomputed at next deflate call.
+ */
+ }
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if (s->last_lit)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
+
+
+#ifdef ZLIB_PM3_TUNED
+local uInt try_harder(s, strstart, lookahead, hash_head)
+ deflate_state *s;
+ uInt strstart;
+ uInt lookahead;
+ IPos hash_head;
+{
+ uInt strstart_save = s->strstart;
+ s->strstart = strstart;
+ uInt lookahead_save = s->lookahead;
+ s->lookahead = lookahead;
+ uInt ins_h_save = s->ins_h;
+ uInt combined_gain;
+ uInt best_combined_gain = 0;
+ uInt match_length;
+ uInt prev_length = s->prev_length < MIN_MATCH ? 1 : s->prev_length;
+ uInt best_prev_length = prev_length;
+ uInt current_match_start = s->match_start;
+ uInt current_match_length = s->match_length;
+
+ do {
+ if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
+ match_length = longest_match (s, hash_head);
+ /* longest_match() sets match_start */
+ } else {
+ match_length = MIN_MATCH - 1;
+ }
+#if TOO_FAR <= 32767
+ if (match_length == MIN_MATCH && s->strstart - s->match_start > TOO_FAR) {
+ match_length = MIN_MATCH-1;
+ }
+#endif
+ if (s->strstart == strstart) { // store match at current position
+ current_match_length = match_length;
+ current_match_start = s->match_start;
+ }
+ if (s->strstart - strstart + 1 < MIN_MATCH) { // previous match reduced to one or two literals
+ combined_gain = 0; // need one literal per byte: no gain (assuming 8 bits per literal)
+ } else {
+ combined_gain = s->strstart - strstart + 1 - MIN_MATCH; // (possibly truncated) previous_length - 3 literals
+ }
+ if (match_length < MIN_MATCH) {
+ combined_gain += 0; // no gain
+ } else {
+ combined_gain += match_length - MIN_MATCH; // match_length bytes are coded as three literals
+ }
+ if (combined_gain >= best_combined_gain) { // in case of a tie we prefer the longer prev_length
+ best_combined_gain = combined_gain;
+ best_prev_length = s->strstart - strstart + 1;
+ }
+ s->strstart++;
+ s->lookahead--;
+ UPDATE_HASH(s, s->ins_h, s->window[(s->strstart) + (MIN_MATCH-1)]);
+ hash_head = s->head[s->ins_h];
+ } while (s->strstart <= strstart-1 + prev_length // try to truncate the previous match to 1, 3, ... prev_length
+ && s->strstart <= s->window_size - MIN_LOOKAHEAD); // watch out for the end of the input
+
+ s->strstart = strstart_save;
+ s->lookahead = lookahead_save;
+ s->ins_h = ins_h_save;
+ s->match_length = current_match_length;
+ s->match_start = current_match_start;
+ if (best_prev_length >= MIN_MATCH) {
+ s->prev_length = best_prev_length;
+ s->match_length = MIN_MATCH - 1;
+ } else {
+ s->prev_length = MIN_MATCH - 1;
+ }
+ return best_combined_gain;
+}
+#endif
+
+
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+local block_state deflate_slow(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ IPos hash_head; /* head of hash chain */
+ int bflush; /* set if current block must be flushed */
+
+ /* Process the input block. */
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (s->lookahead < MIN_LOOKAHEAD) {
+ fill_window(s);
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ hash_head = NIL;
+ if (s->lookahead >= MIN_MATCH) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+
+ /* Find the longest match, discarding those <= prev_length. */
+ s->prev_length = s->match_length, s->prev_match = s->match_start;
+ s->match_length = MIN_MATCH-1;
+
+#ifdef ZLIB_PM3_TUNED
+ if (s->prev_length < s->max_lazy_match) {
+ try_harder(s, s->strstart, s->lookahead, hash_head);
+ }
+
+#else
+ if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
+ s->strstart - hash_head <= MAX_DIST(s)) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ s->match_length = longest_match (s, hash_head);
+ /* longest_match() sets match_start */
+
+ if (s->match_length <= 5 && (s->strategy == Z_FILTERED
+#if TOO_FAR <= 32767
+ || (s->match_length == MIN_MATCH &&
+ s->strstart - s->match_start > TOO_FAR)
+#endif
+ )) {
+
+ /* If prev_match is also MIN_MATCH, match_start is garbage
+ * but we will ignore the current match anyway.
+ */
+ s->match_length = MIN_MATCH-1;
+ }
+ }
+#endif /* ZLIB_PM3_TUNED */
+ /* If there was a match at the previous step and the current
+ * match is not better, output the previous match:
+ */
+ if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
+ uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
+ /* Do not insert strings in hash table beyond this. */
+
+ check_match(s, s->strstart-1, s->prev_match, s->prev_length);
+
+ _tr_tally_dist(s, s->strstart -1 - s->prev_match,
+ s->prev_length - MIN_MATCH, bflush);
+
+ /* Insert in hash table all strings up to the end of the match.
+ * strstart-1 and strstart are already inserted. If there is not
+ * enough lookahead, the last two strings are not inserted in
+ * the hash table.
+ */
+ s->lookahead -= s->prev_length-1;
+ s->prev_length -= 2;
+ do {
+ if (++s->strstart <= max_insert) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+ } while (--s->prev_length != 0);
+ s->match_available = 0;
+ s->match_length = MIN_MATCH-1;
+ s->strstart++;
+
+ if (bflush) FLUSH_BLOCK(s, 0);
+
+ } else if (s->match_available) {
+ /* If there was no match at the previous position, output a
+ * single literal. If there was a match but the current match
+ * is longer, truncate the previous match to a single literal.
+ */
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+ if (bflush) {
+ FLUSH_BLOCK_ONLY(s, 0);
+ }
+ s->strstart++;
+ s->lookahead--;
+ if (s->strm->avail_out == 0) return need_more;
+ } else {
+ /* There is no previous match to compare with, wait for
+ * the next step to decide.
+ */
+ s->match_available = 1;
+ s->strstart++;
+ s->lookahead--;
+ }
+ }
+ Assert (flush != Z_NO_FLUSH, "no flush?");
+ if (s->match_available) {
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+ s->match_available = 0;
+ }
+ s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if (s->last_lit)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
+#endif /* FASTEST */
+
+/* ===========================================================================
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
+ * one. Do not maintain a hash table. (It will be regenerated if this run of
+ * deflate switches away from Z_RLE.)
+ */
+local block_state deflate_rle(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ int bflush; /* set if current block must be flushed */
+ uInt prev; /* byte at distance one to match */
+ Bytef *scan, *strend; /* scan goes up to strend for length of run */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the longest run, plus one for the unrolled loop.
+ */
+ if (s->lookahead <= MAX_MATCH) {
+ fill_window(s);
+ if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* See how many times the previous byte repeats */
+ s->match_length = 0;
+ if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
+ scan = s->window + s->strstart - 1;
+ prev = *scan;
+ if (prev == *++scan && prev == *++scan && prev == *++scan) {
+ strend = s->window + s->strstart + MAX_MATCH;
+ do {
+ } while (prev == *++scan && prev == *++scan &&
+ prev == *++scan && prev == *++scan &&
+ prev == *++scan && prev == *++scan &&
+ prev == *++scan && prev == *++scan &&
+ scan < strend);
+ s->match_length = MAX_MATCH - (int)(strend - scan);
+ if (s->match_length > s->lookahead)
+ s->match_length = s->lookahead;
+ }
+ Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
+ }
+
+ /* Emit match if have run of MIN_MATCH or longer, else emit literal */
+ if (s->match_length >= MIN_MATCH) {
+ check_match(s, s->strstart, s->strstart - 1, s->match_length);
+
+ _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
+
+ s->lookahead -= s->match_length;
+ s->strstart += s->match_length;
+ s->match_length = 0;
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ s->insert = 0;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if (s->last_lit)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
+
+/* ===========================================================================
+ * For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table.
+ * (It will be regenerated if this run of deflate switches away from Huffman.)
+ */
+local block_state deflate_huff(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ int bflush; /* set if current block must be flushed */
+
+ for (;;) {
+ /* Make sure that we have a literal to write. */
+ if (s->lookahead == 0) {
+ fill_window(s);
+ if (s->lookahead == 0) {
+ if (flush == Z_NO_FLUSH)
+ return need_more;
+ break; /* flush the current block */
+ }
+ }
+
+ /* Output a literal byte */
+ s->match_length = 0;
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ s->insert = 0;
+ if (flush == Z_FINISH) {
+ FLUSH_BLOCK(s, 1);
+ return finish_done;
+ }
+ if (s->last_lit)
+ FLUSH_BLOCK(s, 0);
+ return block_done;
+}
--- /dev/null
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995-2012 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef DEFLATE_H
+#define DEFLATE_H
+
+#include "zutil.h"
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+ trailer creation by deflate(). NO_GZIP would be used to avoid linking in
+ the crc code when it is not needed. For shared libraries, gzip encoding
+ should be left enabled. */
+#ifndef NO_GZIP
+# define GZIP
+#endif
+
+/* ===========================================================================
+ * Internal compression state.
+ */
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS 256
+/* number of literal bytes 0..255 */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES 30
+/* number of distance codes */
+
+#define BL_CODES 19
+/* number of codes used to transfer the bit lengths */
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define Buf_size 16
+/* size of bit buffer in bi_buf */
+
+#define INIT_STATE 42
+#define EXTRA_STATE 69
+#define NAME_STATE 73
+#define COMMENT_STATE 91
+#define HCRC_STATE 103
+#define BUSY_STATE 113
+#define FINISH_STATE 666
+/* Stream status */
+
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data_s {
+ union {
+ ush freq; /* frequency count */
+ ush code; /* bit string */
+ } fc;
+ union {
+ ush dad; /* father node in Huffman tree */
+ ush len; /* length of bit string */
+ } dl;
+} FAR ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad dl.dad
+#define Len dl.len
+
+typedef struct static_tree_desc_s static_tree_desc;
+
+typedef struct tree_desc_s {
+ ct_data *dyn_tree; /* the dynamic tree */
+ int max_code; /* largest code with non zero frequency */
+ static_tree_desc *stat_desc; /* the corresponding static tree */
+} FAR tree_desc;
+
+typedef ush Pos;
+typedef Pos FAR Posf;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+typedef struct internal_state {
+ z_streamp strm; /* pointer back to this zlib stream */
+ int status; /* as the name implies */
+ Bytef *pending_buf; /* output still pending */
+ ulg pending_buf_size; /* size of pending_buf */
+ Bytef *pending_out; /* next pending byte to output to the stream */
+ uInt pending; /* nb of bytes in the pending buffer */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
+ gz_headerp gzhead; /* gzip header information to write */
+ uInt gzindex; /* where in extra, name, or comment */
+ Byte method; /* can only be DEFLATED */
+ int last_flush; /* value of flush param for previous deflate call */
+
+ /* used by deflate.c: */
+
+ uInt w_size; /* LZ77 window size (32K by default) */
+ uInt w_bits; /* log2(w_size) (8..16) */
+ uInt w_mask; /* w_size - 1 */
+
+ Bytef *window;
+ /* Sliding window. Input bytes are read into the second half of the window,
+ * and move to the first half later to keep a dictionary of at least wSize
+ * bytes. With this organization, matches are limited to a distance of
+ * wSize-MAX_MATCH bytes, but this ensures that IO is always
+ * performed with a length multiple of the block size. Also, it limits
+ * the window size to 64K, which is quite useful on MSDOS.
+ * To do: use the user input buffer as sliding window.
+ */
+
+ ulg window_size;
+ /* Actual size of window: 2*wSize, except when the user input buffer
+ * is directly used as sliding window.
+ */
+
+ Posf *prev;
+ /* Link to older string with same hash index. To limit the size of this
+ * array to 64K, this link is maintained only for the last 32K strings.
+ * An index in this array is thus a window index modulo 32K.
+ */
+
+ Posf *head; /* Heads of the hash chains or NIL. */
+
+ uInt ins_h; /* hash index of string to be inserted */
+ uInt hash_size; /* number of elements in hash table */
+ uInt hash_bits; /* log2(hash_size) */
+ uInt hash_mask; /* hash_size-1 */
+
+ uInt hash_shift;
+ /* Number of bits by which ins_h must be shifted at each input
+ * step. It must be such that after MIN_MATCH steps, the oldest
+ * byte no longer takes part in the hash key, that is:
+ * hash_shift * MIN_MATCH >= hash_bits
+ */
+
+ long block_start;
+ /* Window position at the beginning of the current output block. Gets
+ * negative when the window is moved backwards.
+ */
+
+ uInt match_length; /* length of best match */
+ IPos prev_match; /* previous match */
+ int match_available; /* set if previous match exists */
+ uInt strstart; /* start of string to insert */
+ uInt match_start; /* start of matching string */
+ uInt lookahead; /* number of valid bytes ahead in window */
+
+ uInt prev_length;
+ /* Length of the best match at previous step. Matches not greater than this
+ * are discarded. This is used in the lazy match evaluation.
+ */
+
+ uInt max_chain_length;
+ /* To speed up deflation, hash chains are never searched beyond this
+ * length. A higher limit improves compression ratio but degrades the
+ * speed.
+ */
+
+ uInt max_lazy_match;
+ /* Attempt to find a better match only when the current match is strictly
+ * smaller than this value. This mechanism is used only for compression
+ * levels >= 4.
+ */
+# define max_insert_length max_lazy_match
+ /* Insert new strings in the hash table only if the match length is not
+ * greater than this length. This saves time but degrades compression.
+ * max_insert_length is used only for compression levels <= 3.
+ */
+
+ int level; /* compression level (1..9) */
+ int strategy; /* favor or force Huffman coding*/
+
+ uInt good_match;
+ /* Use a faster search when the previous match is longer than this */
+
+ int nice_match; /* Stop searching when current match exceeds this */
+
+ /* used by trees.c: */
+ /* Didn't use ct_data typedef below to suppress compiler warning */
+ struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
+ struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+ struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
+
+ struct tree_desc_s l_desc; /* desc. for literal tree */
+ struct tree_desc_s d_desc; /* desc. for distance tree */
+ struct tree_desc_s bl_desc; /* desc. for bit length tree */
+
+ ush bl_count[MAX_BITS+1];
+ /* number of codes at each bit length for an optimal tree */
+
+ int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
+ int heap_len; /* number of elements in the heap */
+ int heap_max; /* element of largest frequency */
+ /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+ * The same heap array is used to build all trees.
+ */
+
+ uch depth[2*L_CODES+1];
+ /* Depth of each subtree used as tie breaker for trees of equal frequency
+ */
+
+ uchf *l_buf; /* buffer for literals or lengths */
+
+ uInt lit_bufsize;
+ /* Size of match buffer for literals/lengths. There are 4 reasons for
+ * limiting lit_bufsize to 64K:
+ * - frequencies can be kept in 16 bit counters
+ * - if compression is not successful for the first block, all input
+ * data is still in the window so we can still emit a stored block even
+ * when input comes from standard input. (This can also be done for
+ * all blocks if lit_bufsize is not greater than 32K.)
+ * - if compression is not successful for a file smaller than 64K, we can
+ * even emit a stored file instead of a stored block (saving 5 bytes).
+ * This is applicable only for zip (not gzip or zlib).
+ * - creating new Huffman trees less frequently may not provide fast
+ * adaptation to changes in the input data statistics. (Take for
+ * example a binary file with poorly compressible code followed by
+ * a highly compressible string table.) Smaller buffer sizes give
+ * fast adaptation but have of course the overhead of transmitting
+ * trees more frequently.
+ * - I can't count above 4
+ */
+
+ uInt last_lit; /* running index in l_buf */
+
+ ushf *d_buf;
+ /* Buffer for distances. To simplify the code, d_buf and l_buf have
+ * the same number of elements. To use different lengths, an extra flag
+ * array would be necessary.
+ */
+
+ ulg opt_len; /* bit length of current block with optimal trees */
+ ulg static_len; /* bit length of current block with static trees */
+ uInt matches; /* number of string matches in current block */
+ uInt insert; /* bytes at end of window left to insert */
+
+#ifdef DEBUG
+ ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+ ulg bits_sent; /* bit length of compressed data sent mod 2^32 */
+#endif
+
+ ush bi_buf;
+ /* Output buffer. bits are inserted starting at the bottom (least
+ * significant bits).
+ */
+ int bi_valid;
+ /* Number of valid bits in bi_buf. All bits above the last valid bit
+ * are always zero.
+ */
+
+ ulg high_water;
+ /* High water mark offset in window for initialized bytes -- bytes above
+ * this are set to zero in order to avoid memory check warnings when
+ * longest match routines access bytes past the input. This is then
+ * updated to the new high water mark.
+ */
+
+} FAR deflate_state;
+
+/* Output a byte on the stream.
+ * IN assertion: there is enough room in pending_buf.
+ */
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+#define WIN_INIT MAX_MATCH
+/* Number of bytes after end of data in window to initialize in order to avoid
+ memory checker errors from longest match routines */
+
+ /* in trees.c */
+void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
+int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
+void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
+ ulg stored_len, int last));
+void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
+ ulg stored_len, int last));
+
+#define d_code(dist) \
+ ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+ extern uch ZLIB_INTERNAL _length_code[];
+ extern uch ZLIB_INTERNAL _dist_code[];
+#else
+ extern const uch ZLIB_INTERNAL _length_code[];
+ extern const uch ZLIB_INTERNAL _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+ { uch cc = (c); \
+ s->d_buf[s->last_lit] = 0; \
+ s->l_buf[s->last_lit++] = cc; \
+ s->dyn_ltree[cc].Freq++; \
+ flush = (s->last_lit == s->lit_bufsize-1); \
+ }
+# define _tr_tally_dist(s, distance, length, flush) \
+ { uch len = (length); \
+ ush dist = (distance); \
+ s->d_buf[s->last_lit] = dist; \
+ s->l_buf[s->last_lit++] = len; \
+ dist--; \
+ s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+ s->dyn_dtree[d_code(dist)].Freq++; \
+ flush = (s->last_lit == s->lit_bufsize-1); \
+ }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+ flush = _tr_tally(s, distance, length)
+#endif
+
+#endif /* DEFLATE_H */
--- /dev/null
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2008, 2010, 2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifndef ASMINF
+
+/* Allow machine dependent optimization for post-increment or pre-increment.
+ Based on testing to date,
+ Pre-increment preferred for:
+ - PowerPC G3 (Adler)
+ - MIPS R5000 (Randers-Pehrson)
+ Post-increment preferred for:
+ - none
+ No measurable difference:
+ - Pentium III (Anderson)
+ - M68060 (Nikl)
+ */
+#ifdef POSTINC
+# define OFF 0
+# define PUP(a) *(a)++
+#else
+# define OFF 1
+# define PUP(a) *++(a)
+#endif
+
+/*
+ Decode literal, length, and distance codes and write out the resulting
+ literal and match bytes until either not enough input or output is
+ available, an end-of-block is encountered, or a data error is encountered.
+ When large enough input and output buffers are supplied to inflate(), for
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the
+ inflate execution time is spent in this routine.
+
+ Entry assumptions:
+
+ state->mode == LEN
+ strm->avail_in >= 6
+ strm->avail_out >= 258
+ start >= strm->avail_out
+ state->bits < 8
+
+ On return, state->mode is one of:
+
+ LEN -- ran out of enough output space or enough available input
+ TYPE -- reached end of block code, inflate() to interpret next block
+ BAD -- error in block data
+
+ Notes:
+
+ - The maximum input bits used by a length/distance pair is 15 bits for the
+ length code, 5 bits for the length extra, 15 bits for the distance code,
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes.
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid
+ checking for available input while decoding.
+
+ - The maximum bytes that a single length/distance pair can output is 258
+ bytes, which is the maximum length that can be coded. inflate_fast()
+ requires strm->avail_out >= 258 for each loop to avoid checking for
+ output space.
+ */
+void ZLIB_INTERNAL inflate_fast(strm, start)
+z_streamp strm;
+unsigned start; /* inflate()'s starting value for strm->avail_out */
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *in; /* local strm->next_in */
+ z_const unsigned char FAR *last; /* have enough input while in < last */
+ unsigned char FAR *out; /* local strm->next_out */
+ unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
+ unsigned char FAR *end; /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+ unsigned dmax; /* maximum distance from zlib header */
+#endif
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned wnext; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */
+ unsigned long hold; /* local strm->hold */
+ unsigned bits; /* local strm->bits */
+ code const FAR *lcode; /* local strm->lencode */
+ code const FAR *dcode; /* local strm->distcode */
+ unsigned lmask; /* mask for first level of length codes */
+ unsigned dmask; /* mask for first level of distance codes */
+ code here; /* retrieved table entry */
+ unsigned op; /* code bits, operation, extra bits, or */
+ /* window position, window bytes to copy */
+ unsigned len; /* match length, unused bytes */
+ unsigned dist; /* match distance */
+ unsigned char FAR *from; /* where to copy match from */
+
+ /* copy state to local variables */
+ state = (struct inflate_state FAR *)strm->state;
+ in = strm->next_in - OFF;
+ last = in + (strm->avail_in - 5);
+ out = strm->next_out - OFF;
+ beg = out - (start - strm->avail_out);
+ end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+ dmax = state->dmax;
+#endif
+ wsize = state->wsize;
+ whave = state->whave;
+ wnext = state->wnext;
+ window = state->window;
+ hold = state->hold;
+ bits = state->bits;
+ lcode = state->lencode;
+ dcode = state->distcode;
+ lmask = (1U << state->lenbits) - 1;
+ dmask = (1U << state->distbits) - 1;
+
+ /* decode literals and length/distances until end-of-block or not enough
+ input data or output space */
+ do {
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ here = lcode[hold & lmask];
+ dolen:
+ op = (unsigned)(here.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(here.op);
+ if (op == 0) { /* literal */
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ PUP(out) = (unsigned char)(here.val);
+ }
+ else if (op & 16) { /* length base */
+ len = (unsigned)(here.val);
+ op &= 15; /* number of extra bits */
+ if (op) {
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ len += (unsigned)hold & ((1U << op) - 1);
+ hold >>= op;
+ bits -= op;
+ }
+ Tracevv((stderr, "inflate: length %u\n", len));
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ here = dcode[hold & dmask];
+ dodist:
+ op = (unsigned)(here.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(here.op);
+ if (op & 16) { /* distance base */
+ dist = (unsigned)(here.val);
+ op &= 15; /* number of extra bits */
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ }
+ dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+ if (dist > dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ hold >>= op;
+ bits -= op;
+ Tracevv((stderr, "inflate: distance %u\n", dist));
+ op = (unsigned)(out - beg); /* max distance in output */
+ if (dist > op) { /* see if copy from window */
+ op = dist - op; /* distance back in window */
+ if (op > whave) {
+ if (state->sane) {
+ strm->msg =
+ (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ if (len <= op - whave) {
+ do {
+ PUP(out) = 0;
+ } while (--len);
+ continue;
+ }
+ len -= op - whave;
+ do {
+ PUP(out) = 0;
+ } while (--op > whave);
+ if (op == 0) {
+ from = out - dist;
+ do {
+ PUP(out) = PUP(from);
+ } while (--len);
+ continue;
+ }
+#endif
+ }
+ from = window - OFF;
+ if (wnext == 0) { /* very common case */
+ from += wsize - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ else if (wnext < op) { /* wrap around window */
+ from += wsize + wnext - op;
+ op -= wnext;
+ if (op < len) { /* some from end of window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = window - OFF;
+ if (wnext < len) { /* some from start of window */
+ op = wnext;
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ }
+ else { /* contiguous in window */
+ from += wnext - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ while (len > 2) {
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ }
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ else {
+ from = out - dist; /* copy direct from output */
+ do { /* minimum length is three */
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ } while (len > 2);
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level distance code */
+ here = dcode[here.val + (hold & ((1U << op) - 1))];
+ goto dodist;
+ }
+ else {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level length code */
+ here = lcode[here.val + (hold & ((1U << op) - 1))];
+ goto dolen;
+ }
+ else if (op & 32) { /* end-of-block */
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->mode = TYPE;
+ break;
+ }
+ else {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ } while (in < last && out < end);
+
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+ len = bits >> 3;
+ in -= len;
+ bits -= len << 3;
+ hold &= (1U << bits) - 1;
+
+ /* update state and return */
+ strm->next_in = in + OFF;
+ strm->next_out = out + OFF;
+ strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+ strm->avail_out = (unsigned)(out < end ?
+ 257 + (end - out) : 257 - (out - end));
+ state->hold = hold;
+ state->bits = bits;
+ return;
+}
+
+/*
+ inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+ - Using bit fields for code structure
+ - Different op definition to avoid & for extra bits (do & for table bits)
+ - Three separate decoding do-loops for direct, window, and wnext == 0
+ - Special case for distance > 1 copies to do overlapped load and store copy
+ - Explicit branch predictions (based on measured branch probabilities)
+ - Deferring match copy and interspersed it with decoding subsequent codes
+ - Swapping literal/length else
+ - Swapping window/direct else
+ - Larger unrolled copy loops (three is about right)
+ - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
--- /dev/null
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
--- /dev/null
+ /* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by makefixed().
+ */
+
+ /* WARNING: this file should *not* be used by applications.
+ It is part of the implementation of this library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+ static const code lenfix[512] = {
+ {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+ {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+ {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+ {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+ {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+ {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+ {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+ {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+ {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+ {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+ {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+ {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+ {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+ {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+ {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+ {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+ {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+ {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+ {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+ {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+ {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+ {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+ {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+ {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+ {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+ {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+ {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+ {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+ {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+ {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+ {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+ {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+ {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+ {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+ {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+ {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+ {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+ {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+ {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+ {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+ {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+ {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+ {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+ {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+ {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+ {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+ {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+ {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+ {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+ {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+ {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+ {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+ {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+ {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+ {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+ {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+ {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+ {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+ {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+ {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+ {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+ {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+ {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+ {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+ {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+ {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+ {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+ {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+ {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+ {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+ {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+ {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+ {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+ {0,9,255}
+ };
+
+ static const code distfix[32] = {
+ {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+ {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+ {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+ {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+ {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+ {22,5,193},{64,5,0}
+ };
--- /dev/null
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2012 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * Change history:
+ *
+ * 1.2.beta0 24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ * creation of window when not needed, minimize use of window when it is
+ * needed, make inffast.c even faster, implement gzip decoding, and to
+ * improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1 25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2 4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ * to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3 22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ * buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4 1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ * source file infback.c to provide a call-back interface to inflate for
+ * programs like gzip and unzip -- uses window as output buffer to avoid
+ * window copying
+ *
+ * 1.2.beta5 1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ * input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6 4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ * make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7 27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0 9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ * for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ * and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
+//-----------------------------------------------------------------------------
+// This version of zlib is modified for use within the Proxmark3 project.
+// Files from the original distribution which are not required for this
+// purpose are not included. All modifications can easily be found
+// by searching for #ifdef ZLIB_PM3_TUNED and #ifndef ZLIB_PM3_TUNED.
+//-----------------------------------------------------------------------------
+
+
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef MAKEFIXED
+# ifndef BUILDFIXED
+# define BUILDFIXED
+# endif
+#endif
+
+/* function prototypes */
+#ifdef ZLIB_PM3_TUNED
+extern void Dbprintf(const char *fmt, ...);
+#else
+local void fixedtables OF((struct inflate_state FAR *state));
+#endif
+local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+ unsigned copy));
+#ifdef BUILDFIXED
+ void makefixed OF((void));
+#endif
+local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+ unsigned len));
+
+int ZEXPORT inflateResetKeep(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ strm->total_in = strm->total_out = state->total = 0;
+ strm->msg = Z_NULL;
+ if (state->wrap) /* to support ill-conceived Java test suite */
+ strm->adler = state->wrap & 1;
+ state->mode = HEAD;
+ state->last = 0;
+ state->havedict = 0;
+ state->dmax = 32768U;
+ state->head = Z_NULL;
+ state->hold = 0;
+ state->bits = 0;
+ state->lencode = state->distcode = state->next = state->codes;
+ state->sane = 1;
+ state->back = -1;
+ Tracev((stderr, "inflate: reset\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateReset(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ state->wsize = 0;
+ state->whave = 0;
+ state->wnext = 0;
+ return inflateResetKeep(strm);
+}
+
+int ZEXPORT inflateReset2(strm, windowBits)
+z_streamp strm;
+int windowBits;
+{
+ int wrap;
+ struct inflate_state FAR *state;
+
+ /* get the state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* extract wrap request from windowBits parameter */
+ if (windowBits < 0) {
+ wrap = 0;
+ windowBits = -windowBits;
+ }
+ else {
+ wrap = (windowBits >> 4) + 1;
+#ifdef GUNZIP
+ if (windowBits < 48)
+ windowBits &= 15;
+#endif
+ }
+
+ /* set number of window bits, free window if different */
+ if (windowBits && (windowBits < 8 || windowBits > 15))
+ return Z_STREAM_ERROR;
+ if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+ ZFREE(strm, state->window);
+ state->window = Z_NULL;
+ }
+
+ /* update state and reset the rest of it */
+ state->wrap = wrap;
+ state->wbits = (unsigned)windowBits;
+ return inflateReset(strm);
+}
+
+int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
+z_streamp strm;
+int windowBits;
+const char *version;
+int stream_size;
+{
+ int ret;
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+#endif
+ }
+ if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+ return Z_STREAM_ERROR;
+#else
+ strm->zfree = zcfree;
+#endif
+ state = (struct inflate_state FAR *)
+ ZALLOC(strm, 1, sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (struct internal_state FAR *)state;
+ state->window = Z_NULL;
+ ret = inflateReset2(strm, windowBits);
+ if (ret != Z_OK) {
+ ZFREE(strm, state);
+ strm->state = Z_NULL;
+ }
+ return ret;
+}
+
+int ZEXPORT inflateInit_(strm, version, stream_size)
+z_streamp strm;
+const char *version;
+int stream_size;
+{
+ return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+}
+
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (bits < 0) {
+ state->hold = 0;
+ state->bits = 0;
+ return Z_OK;
+ }
+ if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += value << state->bits;
+ state->bits += bits;
+ return Z_OK;
+}
+
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. Normally this returns fixed tables from inffixed.h.
+ If BUILDFIXED is defined, then instead this routine builds the tables the
+ first time it's called, and returns those tables the first time and
+ thereafter. This reduces the size of the code by about 2K bytes, in
+ exchange for a little execution time. However, BUILDFIXED should not be
+ used for threaded applications, since the rewriting of the tables and virgin
+ may not be thread-safe.
+ */
+#ifndef ZLIB_PM3_TUNED
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+ static int virgin = 1;
+ static code *lenfix, *distfix;
+ static code fixed[544];
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ unsigned sym, bits;
+ static code *next;
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state->lens[sym++] = 8;
+ while (sym < 256) state->lens[sym++] = 9;
+ while (sym < 280) state->lens[sym++] = 7;
+ while (sym < 288) state->lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state->lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+ /* do this just once */
+ virgin = 0;
+ }
+#else /* !BUILDFIXED */
+# include "inffixed.h"
+#endif /* BUILDFIXED */
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
+}
+
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+/*
+ Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also
+ defines BUILDFIXED, so the tables are built on the fly. makefixed() writes
+ those tables to stdout, which would be piped to inffixed.h. A small program
+ can simply call makefixed to do this:
+
+ void makefixed(void);
+
+ int main(void)
+ {
+ makefixed();
+ return 0;
+ }
+
+ Then that can be linked with zlib built with MAKEFIXED defined and run:
+
+ a.out > inffixed.h
+ */
+void makefixed()
+{
+ unsigned low, size;
+ struct inflate_state state;
+
+ fixedtables(&state);
+ puts(" /* inffixed.h -- table for decoding fixed codes");
+ puts(" * Generated automatically by makefixed().");
+ puts(" */");
+ puts("");
+ puts(" /* WARNING: this file should *not* be used by applications.");
+ puts(" It is part of the implementation of this library and is");
+ puts(" subject to change. Applications should only use zlib.h.");
+ puts(" */");
+ puts("");
+ size = 1U << 9;
+ printf(" static const code lenfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 7) == 0) printf("\n ");
+ printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
+ state.lencode[low].bits, state.lencode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+ size = 1U << 5;
+ printf("\n static const code distfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 6) == 0) printf("\n ");
+ printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+ state.distcode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+}
+#endif /* MAKEFIXED */
+#endif /* ZLIB_PM3_TUNED */
+/*
+ Update the window with the last wsize (normally 32K) bytes written before
+ returning. If window does not exist yet, create it. This is only called
+ when a window is already in use, or when output has been written during this
+ inflate call, but the end of the deflate stream has not been reached yet.
+ It is also called to create a window for dictionary data when a dictionary
+ is loaded.
+
+ Providing output buffers larger than 32K to inflate() should provide a speed
+ advantage, since only the last 32K of output is copied to the sliding window
+ upon return from inflate(), and since all distances after the first 32K of
+ output will fall in the output data, making match copies simpler and faster.
+ The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(strm, end, copy)
+z_streamp strm;
+const Bytef *end;
+unsigned copy;
+{
+ struct inflate_state FAR *state;
+ unsigned dist;
+
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* if it hasn't been done already, allocate space for the window */
+ if (state->window == Z_NULL) {
+ state->window = (unsigned char FAR *)
+ ZALLOC(strm, 1U << state->wbits,
+ sizeof(unsigned char));
+ if (state->window == Z_NULL) return 1;
+ }
+
+ /* if window not in use yet, initialize */
+ if (state->wsize == 0) {
+ state->wsize = 1U << state->wbits;
+ state->wnext = 0;
+ state->whave = 0;
+ }
+
+ /* copy state->wsize or less output bytes into the circular window */
+ if (copy >= state->wsize) {
+ zmemcpy(state->window, end - state->wsize, state->wsize);
+ state->wnext = 0;
+ state->whave = state->wsize;
+ }
+ else {
+ dist = state->wsize - state->wnext;
+ if (dist > copy) dist = copy;
+ zmemcpy(state->window + state->wnext, end - copy, dist);
+ copy -= dist;
+ if (copy) {
+ zmemcpy(state->window, end - copy, copy);
+ state->wnext = copy;
+ state->whave = state->wsize;
+ }
+ else {
+ state->wnext += dist;
+ if (state->wnext == state->wsize) state->wnext = 0;
+ if (state->whave < state->wsize) state->whave += dist;
+ }
+ }
+ return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+# define UPDATE(check, buf, len) \
+ (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+# define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+# define CRC2(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ check = crc32(check, hbuf, 2); \
+ } while (0)
+
+# define CRC4(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ hbuf[2] = (unsigned char)((word) >> 16); \
+ hbuf[3] = (unsigned char)((word) >> 24); \
+ check = crc32(check, hbuf, 4); \
+ } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+ if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ if (have == 0) goto inf_leave; \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/*
+ inflate() uses a state machine to process as much input data and generate as
+ much output data as possible before returning. The state machine is
+ structured roughly as follows:
+
+ for (;;) switch (state) {
+ ...
+ case STATEn:
+ if (not enough input data or output space to make progress)
+ return;
+ ... make progress ...
+ state = STATEm;
+ break;
+ ...
+ }
+
+ so when inflate() is called again, the same case is attempted again, and
+ if the appropriate resources are provided, the machine proceeds to the
+ next state. The NEEDBITS() macro is usually the way the state evaluates
+ whether it can proceed or should return. NEEDBITS() does the return if
+ the requested bits are not available. The typical use of the BITS macros
+ is:
+
+ NEEDBITS(n);
+ ... do something with BITS(n) ...
+ DROPBITS(n);
+
+ where NEEDBITS(n) either returns from inflate() if there isn't enough
+ input left to load n bits into the accumulator, or it continues. BITS(n)
+ gives the low n bits in the accumulator. When done, DROPBITS(n) drops
+ the low n bits off the accumulator. INITBITS() clears the accumulator
+ and sets the number of available bits to zero. BYTEBITS() discards just
+ enough bits to put the accumulator on a byte boundary. After BYTEBITS()
+ and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+ NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+ if there is no input available. The decoding of variable length codes uses
+ PULLBYTE() directly in order to pull just enough bytes to decode the next
+ code, and no more.
+
+ Some states loop until they get enough input, making sure that enough
+ state information is maintained to continue the loop where it left off
+ if NEEDBITS() returns in the loop. For example, want, need, and keep
+ would all have to actually be part of the saved state in case NEEDBITS()
+ returns:
+
+ case STATEw:
+ while (want < need) {
+ NEEDBITS(n);
+ keep[want++] = BITS(n);
+ DROPBITS(n);
+ }
+ state = STATEx;
+ case STATEx:
+
+ As shown above, if the next state is also the next case, then the break
+ is omitted.
+
+ A state may also return if there is not enough output space available to
+ complete that state. Those states are copying stored data, writing a
+ literal byte, and copying a matching string.
+
+ When returning, a "goto inf_leave" is used to update the total counters,
+ update the check value, and determine whether any progress has been made
+ during that inflate() call in order to return the proper return code.
+ Progress is defined as a change in either strm->avail_in or strm->avail_out.
+ When there is a window, goto inf_leave will update the window with the last
+ output written. If a goto inf_leave occurs in the middle of decompression
+ and there is no window currently, goto inf_leave will create one and copy
+ output to the window for the next call of inflate().
+
+ In this implementation, the flush parameter of inflate() only affects the
+ return code (per zlib.h). inflate() always writes as much as possible to
+ strm->next_out, given the space available and the provided input--the effect
+ documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers
+ the allocation of and copying into a sliding window until necessary, which
+ provides the effect documented in zlib.h for Z_FINISH when the entire input
+ stream available. So the only thing the flush parameter actually does is:
+ when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
+ will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(strm, flush)
+z_streamp strm;
+int flush;
+{
+ struct inflate_state FAR *state;
+ z_const unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned in, out; /* save starting available input and output */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code here; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+#ifdef GUNZIP
+ unsigned char hbuf[4]; /* buffer for gzip header crc calculation */
+#endif
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL ||
+ (strm->next_in == Z_NULL && strm->avail_in != 0))
+ return Z_STREAM_ERROR;
+
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */
+ LOAD();
+ in = have;
+ out = left;
+ ret = Z_OK;
+ for (;;)
+ switch (state->mode) {
+ case HEAD:
+ if (state->wrap == 0) {
+ state->mode = TYPEDO;
+ break;
+ }
+ NEEDBITS(16);
+#ifdef GUNZIP
+ if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */
+ state->check = crc32(0L, Z_NULL, 0);
+ CRC2(state->check, hold);
+ INITBITS();
+ state->mode = FLAGS;
+ break;
+ }
+ state->flags = 0; /* expect zlib header */
+ if (state->head != Z_NULL)
+ state->head->done = -1;
+ if (!(state->wrap & 1) || /* check if zlib header allowed */
+#else
+ if (
+#endif
+ ((BITS(8) << 8) + (hold >> 8)) % 31) {
+ strm->msg = (char *)"incorrect header check";
+ state->mode = BAD;
+ break;
+ }
+ if (BITS(4) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ DROPBITS(4);
+ len = BITS(4) + 8;
+ if (state->wbits == 0)
+ state->wbits = len;
+ else if (len > state->wbits) {
+ strm->msg = (char *)"invalid window size";
+ state->mode = BAD;
+ break;
+ }
+ state->dmax = 1U << len;
+ Tracev((stderr, "inflate: zlib header ok\n"));
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = hold & 0x200 ? DICTID : TYPE;
+ INITBITS();
+ break;
+#ifdef GUNZIP
+ case FLAGS:
+ NEEDBITS(16);
+ state->flags = (int)(hold);
+ if ((state->flags & 0xff) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ if (state->flags & 0xe000) {
+ strm->msg = (char *)"unknown header flags set";
+ state->mode = BAD;
+ break;
+ }
+ if (state->head != Z_NULL)
+ state->head->text = (int)((hold >> 8) & 1);
+ if (state->flags & 0x0200) CRC2(state->check, hold);
+ INITBITS();
+ state->mode = TIME;
+ case TIME:
+ NEEDBITS(32);
+ if (state->head != Z_NULL)
+ state->head->time = hold;
+ if (state->flags & 0x0200) CRC4(state->check, hold);
+ INITBITS();
+ state->mode = OS;
+ case OS:
+ NEEDBITS(16);
+ if (state->head != Z_NULL) {
+ state->head->xflags = (int)(hold & 0xff);
+ state->head->os = (int)(hold >> 8);
+ }
+ if (state->flags & 0x0200) CRC2(state->check, hold);
+ INITBITS();
+ state->mode = EXLEN;
+ case EXLEN:
+ if (state->flags & 0x0400) {
+ NEEDBITS(16);
+ state->length = (unsigned)(hold);
+ if (state->head != Z_NULL)
+ state->head->extra_len = (unsigned)hold;
+ if (state->flags & 0x0200) CRC2(state->check, hold);
+ INITBITS();
+ }
+ else if (state->head != Z_NULL)
+ state->head->extra = Z_NULL;
+ state->mode = EXTRA;
+ case EXTRA:
+ if (state->flags & 0x0400) {
+ copy = state->length;
+ if (copy > have) copy = have;
+ if (copy) {
+ if (state->head != Z_NULL &&
+ state->head->extra != Z_NULL) {
+ len = state->head->extra_len - state->length;
+ zmemcpy(state->head->extra + len, next,
+ len + copy > state->head->extra_max ?
+ state->head->extra_max - len : copy);
+ }
+ if (state->flags & 0x0200)
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ state->length -= copy;
+ }
+ if (state->length) goto inf_leave;
+ }
+ state->length = 0;
+ state->mode = NAME;
+ case NAME:
+ if (state->flags & 0x0800) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->name != Z_NULL &&
+ state->length < state->head->name_max)
+ state->head->name[state->length++] = len;
+ } while (len && copy < have);
+ if (state->flags & 0x0200)
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->name = Z_NULL;
+ state->length = 0;
+ state->mode = COMMENT;
+ case COMMENT:
+ if (state->flags & 0x1000) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->comment != Z_NULL &&
+ state->length < state->head->comm_max)
+ state->head->comment[state->length++] = len;
+ } while (len && copy < have);
+ if (state->flags & 0x0200)
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->comment = Z_NULL;
+ state->mode = HCRC;
+ case HCRC:
+ if (state->flags & 0x0200) {
+ NEEDBITS(16);
+ if (hold != (state->check & 0xffff)) {
+ strm->msg = (char *)"header crc mismatch";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ }
+ if (state->head != Z_NULL) {
+ state->head->hcrc = (int)((state->flags >> 9) & 1);
+ state->head->done = 1;
+ }
+ strm->adler = state->check = crc32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ break;
+#endif
+ case DICTID:
+ NEEDBITS(32);
+ strm->adler = state->check = ZSWAP32(hold);
+ INITBITS();
+ state->mode = DICT;
+ case DICT:
+ if (state->havedict == 0) {
+ RESTORE();
+ return Z_NEED_DICT;
+ }
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ case TYPE:
+ if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
+ case TYPEDO:
+ if (state->last) {
+ BYTEBITS();
+ state->mode = CHECK;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+#ifdef ZLIB_PM3_TUNED
+ strm->msg = (char *)"fixed block coding not supported";
+ state->mode = BAD;
+#else
+ fixedtables(state);
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = LEN_; /* decode codes */
+ if (flush == Z_TREES) {
+ DROPBITS(2);
+ goto inf_leave;
+ }
+#endif
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+ case STORED:
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %u\n",
+ state->length));
+ INITBITS();
+ state->mode = COPY_;
+ if (flush == Z_TREES) goto inf_leave;
+ case COPY_:
+ state->mode = COPY;
+ case COPY:
+ copy = state->length;
+ if (copy) {
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ if (copy == 0) goto inf_leave;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ break;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ state->mode = TYPE;
+ break;
+ case TABLE:
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracev((stderr, "inflate: table sizes ok\n"));
+ state->have = 0;
+ state->mode = LENLENS;
+ case LENLENS:
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (const code FAR *)(state->next);
+ state->lenbits = 7;
+ ret = inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+ state->have = 0;
+ state->mode = CODELENS;
+ case CODELENS:
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.val < 16) {
+ DROPBITS(here.bits);
+ state->lens[state->have++] = here.val;
+ }
+ else {
+ if (here.val == 16) {
+ NEEDBITS(here.bits + 2);
+ DROPBITS(here.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = state->lens[state->have - 1];
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (here.val == 17) {
+ NEEDBITS(here.bits + 3);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(here.bits + 7);
+ DROPBITS(here.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* check for end-of-block code (better have one) */
+ if (state->lens[256] == 0) {
+ strm->msg = (char *)"invalid code -- missing end-of-block";
+ state->mode = BAD;
+ break;
+ }
+
+ /* build code tables -- note: do not change the lenbits or distbits
+ values here (9 and 6) without reading the comments in inftrees.h
+ concerning the ENOUGH constants, which depend on those values */
+ state->next = state->codes;
+ state->lencode = (const code FAR *)(state->next);
+ state->lenbits = 9;
+ ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (const code FAR *)(state->next);
+ state->distbits = 6;
+ ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ state->mode = LEN_;
+ if (flush == Z_TREES) goto inf_leave;
+ case LEN_:
+ state->mode = LEN;
+ case LEN:
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ inflate_fast(strm, out);
+ LOAD();
+ if (state->mode == TYPE)
+ state->back = -1;
+ break;
+ }
+ state->back = 0;
+ for (;;) {
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (here.op && (here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ state->back += last.bits;
+ }
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ state->length = (unsigned)here.val;
+ if ((int)(here.op) == 0) {
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", here.val));
+ state->mode = LIT;
+ break;
+ }
+ if (here.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->back = -1;
+ state->mode = TYPE;
+ break;
+ }
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ state->extra = (unsigned)(here.op) & 15;
+ state->mode = LENEXT;
+ case LENEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ state->back += state->extra;
+ }
+ Tracevv((stderr, "inflate: length %u\n", state->length));
+ state->was = state->length;
+ state->mode = DIST;
+ case DIST:
+ for (;;) {
+ here = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((here.op & 0xf0) == 0) {
+ last = here;
+ for (;;) {
+ here = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ state->back += last.bits;
+ }
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ if (here.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)here.val;
+ state->extra = (unsigned)(here.op) & 15;
+ state->mode = DISTEXT;
+ case DISTEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ state->back += state->extra;
+ }
+#ifdef INFLATE_STRICT
+ if (state->offset > state->dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracevv((stderr, "inflate: distance %u\n", state->offset));
+ state->mode = MATCH;
+ case MATCH:
+ if (left == 0) goto inf_leave;
+ copy = out - left;
+ if (state->offset > copy) { /* copy from window */
+ copy = state->offset - copy;
+ if (copy > state->whave) {
+ if (state->sane) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ Trace((stderr, "inflate.c too far\n"));
+ copy -= state->whave;
+ if (copy > state->length) copy = state->length;
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = 0;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+#endif
+ }
+ if (copy > state->wnext) {
+ copy -= state->wnext;
+ from = state->window + (state->wsize - copy);
+ }
+ else
+ from = state->window + (state->wnext - copy);
+ if (copy > state->length) copy = state->length;
+ }
+ else { /* copy from output */
+ from = put - state->offset;
+ copy = state->length;
+ }
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+ case LIT:
+ if (left == 0) goto inf_leave;
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ case CHECK:
+ if (state->wrap) {
+ NEEDBITS(32);
+ out -= left;
+ strm->total_out += out;
+ state->total += out;
+ if (out)
+ strm->adler = state->check =
+ UPDATE(state->check, put - out, out);
+ out = left;
+ if ((
+#ifdef GUNZIP
+ state->flags ? hold :
+#endif
+ ZSWAP32(hold)) != state->check) {
+ strm->msg = (char *)"incorrect data check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: check matches trailer\n"));
+ }
+#ifdef GUNZIP
+ state->mode = LENGTH;
+ case LENGTH:
+ if (state->wrap && state->flags) {
+ NEEDBITS(32);
+ if (hold != (state->total & 0xffffffffUL)) {
+ strm->msg = (char *)"incorrect length check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: length matches trailer\n"));
+ }
+#endif
+ state->mode = DONE;
+ case DONE:
+ ret = Z_STREAM_END;
+ goto inf_leave;
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+ case MEM:
+ return Z_MEM_ERROR;
+ case SYNC:
+ default:
+ return Z_STREAM_ERROR;
+ }
+
+ /*
+ Return from inflate(), updating the total counts and the check value.
+ If there was no progress during the inflate() call, return a buffer
+ error. Call updatewindow() to create and/or update the window state.
+ Note: a memory error from inflate() is non-recoverable.
+ */
+ inf_leave:
+ RESTORE();
+ if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
+ (state->mode < CHECK || flush != Z_FINISH)))
+ if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ in -= strm->avail_in;
+ out -= strm->avail_out;
+ strm->total_in += in;
+ strm->total_out += out;
+ state->total += out;
+ if (state->wrap && out)
+ strm->adler = state->check =
+ UPDATE(state->check, strm->next_out - out, out);
+ strm->data_type = state->bits + (state->last ? 64 : 0) +
+ (state->mode == TYPE ? 128 : 0) +
+ (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
+ if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+ ret = Z_BUF_ERROR;
+ return ret;
+}
+
+int ZEXPORT inflateEnd(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->window != Z_NULL) ZFREE(strm, state->window);
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+Bytef *dictionary;
+uInt *dictLength;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* copy dictionary */
+ if (state->whave && dictionary != Z_NULL) {
+ zmemcpy(dictionary, state->window + state->wnext,
+ state->whave - state->wnext);
+ zmemcpy(dictionary + state->whave - state->wnext,
+ state->window, state->wnext);
+ }
+ if (dictLength != Z_NULL)
+ *dictLength = state->whave;
+ return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+const Bytef *dictionary;
+uInt dictLength;
+{
+ struct inflate_state FAR *state;
+ unsigned long dictid;
+ int ret;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->wrap != 0 && state->mode != DICT)
+ return Z_STREAM_ERROR;
+
+ /* check for correct dictionary identifier */
+ if (state->mode == DICT) {
+ dictid = adler32(0L, Z_NULL, 0);
+ dictid = adler32(dictid, dictionary, dictLength);
+ if (dictid != state->check)
+ return Z_DATA_ERROR;
+ }
+
+ /* copy dictionary to window using updatewindow(), which will amend the
+ existing dictionary if appropriate */
+ ret = updatewindow(strm, dictionary + dictLength, dictLength);
+ if (ret) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ state->havedict = 1;
+ Tracev((stderr, "inflate: dictionary set\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+ /* save header structure */
+ state->head = head;
+ head->done = 0;
+ return Z_OK;
+}
+
+/*
+ Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
+ or when out of input. When called, *have is the number of pattern bytes
+ found in order so far, in 0..3. On return *have is updated to the new
+ state. If on return *have equals four, then the pattern was found and the
+ return value is how many bytes were read including the last byte of the
+ pattern. If *have is less than four, then the pattern has not been found
+ yet and the return value is len. In the latter case, syncsearch() can be
+ called again with more data and the *have state. *have is initialized to
+ zero for the first call.
+ */
+local unsigned syncsearch(have, buf, len)
+unsigned FAR *have;
+const unsigned char FAR *buf;
+unsigned len;
+{
+ unsigned got;
+ unsigned next;
+
+ got = *have;
+ next = 0;
+ while (next < len && got < 4) {
+ if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+ got++;
+ else if (buf[next])
+ got = 0;
+ else
+ got = 4 - got;
+ next++;
+ }
+ *have = got;
+ return next;
+}
+
+int ZEXPORT inflateSync(strm)
+z_streamp strm;
+{
+ unsigned len; /* number of bytes to look at or looked at */
+ unsigned long in, out; /* temporary to save total_in and total_out */
+ unsigned char buf[4]; /* to restore bit buffer to byte string */
+ struct inflate_state FAR *state;
+
+ /* check parameters */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+ /* if first time, start search in bit buffer */
+ if (state->mode != SYNC) {
+ state->mode = SYNC;
+ state->hold <<= state->bits & 7;
+ state->bits -= state->bits & 7;
+ len = 0;
+ while (state->bits >= 8) {
+ buf[len++] = (unsigned char)(state->hold);
+ state->hold >>= 8;
+ state->bits -= 8;
+ }
+ state->have = 0;
+ syncsearch(&(state->have), buf, len);
+ }
+
+ /* search available input */
+ len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+ strm->avail_in -= len;
+ strm->next_in += len;
+ strm->total_in += len;
+
+ /* return no joy or set up to restart inflate() on a new block */
+ if (state->have != 4) return Z_DATA_ERROR;
+ in = strm->total_in; out = strm->total_out;
+ inflateReset(strm);
+ strm->total_in = in; strm->total_out = out;
+ state->mode = TYPE;
+ return Z_OK;
+}
+
+/*
+ Returns true if inflate is currently at the end of a block generated by
+ Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ implementation to provide an additional safety check. PPP uses
+ Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+ block. When decompressing, PPP checks that at the end of input packet,
+ inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ return state->mode == STORED && state->bits == 0;
+}
+
+int ZEXPORT inflateCopy(dest, source)
+z_streamp dest;
+z_streamp source;
+{
+ struct inflate_state FAR *state;
+ struct inflate_state FAR *copy;
+ unsigned char FAR *window;
+ unsigned wsize;
+
+ /* check input */
+ if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
+ source->zalloc == (alloc_func)0 || source->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)source->state;
+
+ /* allocate space */
+ copy = (struct inflate_state FAR *)
+ ZALLOC(source, 1, sizeof(struct inflate_state));
+ if (copy == Z_NULL) return Z_MEM_ERROR;
+ window = Z_NULL;
+ if (state->window != Z_NULL) {
+ window = (unsigned char FAR *)
+ ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+ if (window == Z_NULL) {
+ ZFREE(source, copy);
+ return Z_MEM_ERROR;
+ }
+ }
+
+ /* copy state */
+ zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+ zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+ if (state->lencode >= state->codes &&
+ state->lencode <= state->codes + ENOUGH - 1) {
+ copy->lencode = copy->codes + (state->lencode - state->codes);
+ copy->distcode = copy->codes + (state->distcode - state->codes);
+ }
+ copy->next = copy->codes + (state->next - state->codes);
+ if (window != Z_NULL) {
+ wsize = 1U << state->wbits;
+ zmemcpy(window, state->window, wsize);
+ }
+ copy->window = window;
+ dest->state = (struct internal_state FAR *)copy;
+ return Z_OK;
+}
+
+int ZEXPORT inflateUndermine(strm, subvert)
+z_streamp strm;
+int subvert;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ state->sane = !subvert;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ return Z_OK;
+#else
+ state->sane = 1;
+ return Z_DATA_ERROR;
+#endif
+}
+
+long ZEXPORT inflateMark(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16;
+ state = (struct inflate_state FAR *)strm->state;
+ return ((long)(state->back) << 16) +
+ (state->mode == COPY ? state->length :
+ (state->mode == MATCH ? state->was - state->length : 0));
+}
--- /dev/null
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2009 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+ trailer decoding by inflate(). NO_GZIP would be used to avoid linking in
+ the crc code when it is not needed. For shared libraries, gzip decoding
+ should be left enabled. */
+#ifndef NO_GZIP
+# define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+ HEAD, /* i: waiting for magic header */
+ FLAGS, /* i: waiting for method and flags (gzip) */
+ TIME, /* i: waiting for modification time (gzip) */
+ OS, /* i: waiting for extra flags and operating system (gzip) */
+ EXLEN, /* i: waiting for extra length (gzip) */
+ EXTRA, /* i: waiting for extra bytes (gzip) */
+ NAME, /* i: waiting for end of file name (gzip) */
+ COMMENT, /* i: waiting for end of comment (gzip) */
+ HCRC, /* i: waiting for header crc (gzip) */
+ DICTID, /* i: waiting for dictionary check value */
+ DICT, /* waiting for inflateSetDictionary() call */
+ TYPE, /* i: waiting for type bits, including last-flag bit */
+ TYPEDO, /* i: same, but skip check to exit inflate on new block */
+ STORED, /* i: waiting for stored size (length and complement) */
+ COPY_, /* i/o: same as COPY below, but only first time in */
+ COPY, /* i/o: waiting for input or output to copy stored block */
+ TABLE, /* i: waiting for dynamic block table lengths */
+ LENLENS, /* i: waiting for code length code lengths */
+ CODELENS, /* i: waiting for length/lit and distance code lengths */
+ LEN_, /* i: same as LEN below, but only first time in */
+ LEN, /* i: waiting for length/lit/eob code */
+ LENEXT, /* i: waiting for length extra bits */
+ DIST, /* i: waiting for distance code */
+ DISTEXT, /* i: waiting for distance extra bits */
+ MATCH, /* o: waiting for output space to copy string */
+ LIT, /* o: waiting for output space to write literal */
+ CHECK, /* i: waiting for 32-bit check value */
+ LENGTH, /* i: waiting for 32-bit length (gzip) */
+ DONE, /* finished check, done -- remain here until reset */
+ BAD, /* got a data error -- remain here until reset */
+ MEM, /* got an inflate() memory error -- remain here until reset */
+ SYNC /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+ State transitions between above modes -
+
+ (most modes can go to BAD or MEM on error -- not shown for clarity)
+
+ Process header:
+ HEAD -> (gzip) or (zlib) or (raw)
+ (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+ HCRC -> TYPE
+ (zlib) -> DICTID or TYPE
+ DICTID -> DICT -> TYPE
+ (raw) -> TYPEDO
+ Read deflate blocks:
+ TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+ STORED -> COPY_ -> COPY -> TYPE
+ TABLE -> LENLENS -> CODELENS -> LEN_
+ LEN_ -> LEN
+ Read deflate codes in fixed or dynamic block:
+ LEN -> LENEXT or LIT or TYPE
+ LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+ LIT -> LEN
+ Process trailer:
+ CHECK -> LENGTH -> DONE
+ */
+
+/* state maintained between inflate() calls. Approximately 10K bytes. */
+struct inflate_state {
+ inflate_mode mode; /* current inflate mode */
+ int last; /* true if processing last block */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
+ int havedict; /* true if dictionary provided */
+ int flags; /* gzip header method and flags (0 if zlib) */
+ unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
+ unsigned long check; /* protected copy of check value */
+ unsigned long total; /* protected copy of output count */
+ gz_headerp head; /* where to save gzip header information */
+ /* sliding window */
+ unsigned wbits; /* log base 2 of requested window size */
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned wnext; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if needed */
+ /* bit accumulator */
+ unsigned long hold; /* input bit accumulator */
+ unsigned bits; /* number of bits in "in" */
+ /* for string and stored block copying */
+ unsigned length; /* literal or length of data to copy */
+ unsigned offset; /* distance back to copy string from */
+ /* for table and code decoding */
+ unsigned extra; /* extra bits needed */
+ /* fixed and dynamic code tables */
+ code const FAR *lencode; /* starting table for length/literal codes */
+ code const FAR *distcode; /* starting table for distance codes */
+ unsigned lenbits; /* index bits for lencode */
+ unsigned distbits; /* index bits for distcode */
+ /* dynamic table building */
+ unsigned ncode; /* number of code length code lengths */
+ unsigned nlen; /* number of length code lengths */
+ unsigned ndist; /* number of distance code lengths */
+ unsigned have; /* number of code lengths in lens[] */
+ code FAR *next; /* next available space in codes[] */
+ unsigned short lens[320]; /* temporary storage for code lengths */
+ unsigned short work[288]; /* work area for code table building */
+ code codes[ENOUGH]; /* space for code tables */
+ int sane; /* if false, allow invalid distance too far */
+ int back; /* bits back of last unprocessed length/lit */
+ unsigned was; /* initial length of match */
+};
--- /dev/null
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+ " inflate 1.2.8.f-Proxmark3 Copyright 1995-2013 Mark Adler ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+
+/*
+ Build a set of tables to decode the provided canonical Huffman code.
+ The code lengths are lens[0..codes-1]. The result starts at *table,
+ whose indices are 0..2^bits-1. work is a writable array of at least
+ lens shorts, which is used as a work area. type is the type of code
+ to be generated, CODES, LENS, or DISTS. On return, zero is success,
+ -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
+ on return points to the next available entry's address. bits is the
+ requested root table index bits, and on return it is the actual root
+ table index bits. It will differ if the request is greater than the
+ longest code or if it is less than the shortest code.
+ */
+int ZLIB_INTERNAL inflate_table(codetype type, unsigned short FAR *lens,
+ unsigned codes, code FAR * FAR *table,
+ unsigned FAR *bits, unsigned short FAR *work)
+{
+ unsigned len; /* a code's length in bits */
+ unsigned sym; /* index of code symbols */
+ unsigned min, max; /* minimum and maximum code lengths */
+ unsigned root; /* number of index bits for root table */
+ unsigned curr; /* number of index bits for current table */
+ unsigned drop; /* code bits to drop for sub-table */
+ int left; /* number of prefix codes available */
+ unsigned used; /* code entries in table used */
+ unsigned huff; /* Huffman code */
+ unsigned incr; /* for incrementing code, index */
+ unsigned fill; /* index for replicating entries */
+ unsigned low; /* low bits for current root entry */
+ unsigned mask; /* mask for low root bits */
+ code here; /* table entry for duplication */
+ code FAR *next; /* next available space in table */
+ const unsigned short FAR *base; /* base value table to use */
+ const unsigned short FAR *extra; /* extra bits table to use */
+ int end; /* use base and extra for symbol > end */
+ unsigned short count[MAXBITS+1]; /* number of codes of each length */
+ unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
+ static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+ static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+ 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78};
+ static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577, 0, 0};
+ static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+ 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+ 23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+ 28, 28, 29, 29, 64, 64};
+
+ /*
+ Process a set of code lengths to create a canonical Huffman code. The
+ code lengths are lens[0..codes-1]. Each length corresponds to the
+ symbols 0..codes-1. The Huffman code is generated by first sorting the
+ symbols by length from short to long, and retaining the symbol order
+ for codes with equal lengths. Then the code starts with all zero bits
+ for the first code of the shortest length, and the codes are integer
+ increments for the same length, and zeros are appended as the length
+ increases. For the deflate format, these bits are stored backwards
+ from their more natural integer increment ordering, and so when the
+ decoding tables are built in the large loop below, the integer codes
+ are incremented backwards.
+
+ This routine assumes, but does not check, that all of the entries in
+ lens[] are in the range 0..MAXBITS. The caller must assure this.
+ 1..MAXBITS is interpreted as that code length. zero means that that
+ symbol does not occur in this code.
+
+ The codes are sorted by computing a count of codes for each length,
+ creating from that a table of starting indices for each length in the
+ sorted table, and then entering the symbols in order in the sorted
+ table. The sorted table is work[], with that space being provided by
+ the caller.
+
+ The length counts are used for other purposes as well, i.e. finding
+ the minimum and maximum length codes, determining if there are any
+ codes at all, checking for a valid set of lengths, and looking ahead
+ at length counts to determine sub-table sizes when building the
+ decoding tables.
+ */
+
+ /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+ for (len = 0; len <= MAXBITS; len++)
+ count[len] = 0;
+ for (sym = 0; sym < codes; sym++)
+ count[lens[sym]]++;
+
+ /* bound code lengths, force root to be within code lengths */
+ root = *bits;
+ for (max = MAXBITS; max >= 1; max--)
+ if (count[max] != 0) break;
+ if (root > max) root = max;
+ if (max == 0) { /* no symbols to code at all */
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)1;
+ here.val = (unsigned short)0;
+ *(*table)++ = here; /* make a table to force an error */
+ *(*table)++ = here;
+ *bits = 1;
+ return 0; /* no symbols, but wait for decoding to report error */
+ }
+ for (min = 1; min < max; min++)
+ if (count[min] != 0) break;
+ if (root < min) root = min;
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1;
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1;
+ left -= count[len];
+ if (left < 0) return -1; /* over-subscribed */
+ }
+ if (left > 0 && (type == CODES || max != 1))
+ return -1; /* incomplete set */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + count[len];
+
+ /* sort symbols by length, by symbol order within each length */
+ for (sym = 0; sym < codes; sym++)
+ if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+ /*
+ Create and fill in decoding tables. In this loop, the table being
+ filled is at next and has curr index bits. The code being used is huff
+ with length len. That code is converted to an index by dropping drop
+ bits off of the bottom. For codes where len is less than drop + curr,
+ those top drop + curr - len bits are incremented through all values to
+ fill the table with replicated entries.
+
+ root is the number of index bits for the root table. When len exceeds
+ root, sub-tables are created pointed to by the root entry with an index
+ of the low root bits of huff. This is saved in low to check for when a
+ new sub-table should be started. drop is zero when the root table is
+ being filled, and drop is root when sub-tables are being filled.
+
+ When a new sub-table is needed, it is necessary to look ahead in the
+ code lengths to determine what size sub-table is needed. The length
+ counts are used for this, and so count[] is decremented as codes are
+ entered in the tables.
+
+ used keeps track of how many table entries have been allocated from the
+ provided *table space. It is checked for LENS and DIST tables against
+ the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+ the initial root table size constants. See the comments in inftrees.h
+ for more information.
+
+ sym increments through all symbols, and the loop terminates when
+ all codes of length max, i.e. all codes, have been processed. This
+ routine permits incomplete codes, so another loop after this one fills
+ in the rest of the decoding tables with invalid code markers.
+ */
+
+ /* set up for code type */
+ switch (type) {
+ case CODES:
+ base = extra = work; /* dummy value--not used */
+ end = 19;
+ break;
+ case LENS:
+ base = lbase;
+ base -= 257;
+ extra = lext;
+ extra -= 257;
+ end = 256;
+ break;
+ default: /* DISTS */
+ base = dbase;
+ extra = dext;
+ end = -1;
+ }
+
+ /* initialize state for loop */
+ huff = 0; /* starting code */
+ sym = 0; /* starting code symbol */
+ len = min; /* starting code length */
+ next = *table; /* current table to fill in */
+ curr = root; /* current table index bits */
+ drop = 0; /* current bits to drop from code for index */
+ low = (unsigned)(-1); /* trigger new sub-table when len > root */
+ used = 1U << root; /* use root table entries */
+ mask = used - 1; /* mask for comparing low */
+
+ /* check available table space */
+ if ((type == LENS && used > ENOUGH_LENS) ||
+ (type == DISTS && used > ENOUGH_DISTS))
+ return 1;
+
+ /* process all codes and make table entries */
+ for (;;) {
+ /* create table entry */
+ here.bits = (unsigned char)(len - drop);
+ if ((int)(work[sym]) < end) {
+ here.op = (unsigned char)0;
+ here.val = work[sym];
+ }
+ else if ((int)(work[sym]) > end) {
+ here.op = (unsigned char)(extra[work[sym]]);
+ here.val = base[work[sym]];
+ }
+ else {
+ here.op = (unsigned char)(32 + 64); /* end of block */
+ here.val = 0;
+ }
+
+ /* replicate for those indices with low len bits equal to huff */
+ incr = 1U << (len - drop);
+ fill = 1U << curr;
+ min = fill; /* save offset to next table */
+ do {
+ fill -= incr;
+ next[(huff >> drop) + fill] = here;
+ } while (fill != 0);
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+
+ /* go to next symbol, update count, len */
+ sym++;
+ if (--(count[len]) == 0) {
+ if (len == max) break;
+ len = lens[work[sym]];
+ }
+
+ /* create new sub-table if needed */
+ if (len > root && (huff & mask) != low) {
+ /* if first time, transition to sub-tables */
+ if (drop == 0)
+ drop = root;
+
+ /* increment past last table */
+ next += min; /* here min is 1 << curr */
+
+ /* determine length of next table */
+ curr = len - drop;
+ left = (int)(1 << curr);
+ while (curr + drop < max) {
+ left -= count[curr + drop];
+ if (left <= 0) break;
+ curr++;
+ left <<= 1;
+ }
+
+ /* check for enough space */
+ used += 1U << curr;
+ if ((type == LENS && used > ENOUGH_LENS) ||
+ (type == DISTS && used > ENOUGH_DISTS))
+ return 1;
+
+ /* point entry in root table to sub-table */
+ low = huff & mask;
+ (*table)[low].op = (unsigned char)curr;
+ (*table)[low].bits = (unsigned char)root;
+ (*table)[low].val = (unsigned short)(next - *table);
+ }
+ }
+
+ /* fill in remaining table entry if code is incomplete (guaranteed to have
+ at most one remaining entry, since if the code is incomplete, the
+ maximum code length that was allowed to get this far is one bit) */
+ if (huff != 0) {
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)(len - drop);
+ here.val = (unsigned short)0;
+ next[huff] = here;
+ }
+
+ /* set return parameters */
+ *table += used;
+ *bits = root;
+ return 0;
+}
--- /dev/null
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables. Each entry provides either the
+ information needed to do the operation requested by the code that
+ indexed that table entry, or it provides a pointer to another
+ table that indexes more bits of the code. op indicates whether
+ the entry is a pointer to another table, a literal, a length or
+ distance, an end-of-block, or an invalid code. For a table
+ pointer, the low four bits of op is the number of index bits of
+ that table. For a length or distance, the low four bits of op
+ is the number of extra bits to get after the code. bits is
+ the number of bits in this code or part of the code to drop off
+ of the bit buffer. val is the actual byte to output in the case
+ of a literal, the base length or distance, or the offset from
+ the current table to the next table. Each entry is four bytes. */
+typedef struct {
+ unsigned char op; /* operation, extra bits, table bits */
+ unsigned char bits; /* bits in this part of the code */
+ unsigned short val; /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+ 00000000 - literal
+ 0000tttt - table link, tttt != 0 is the number of table index bits
+ 0001eeee - length or distance, eeee is the number of extra bits
+ 01100000 - end of block
+ 01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table. The maximum number of code structures is
+ 1444, which is the sum of 852 for literal/length codes and 592 for distance
+ codes. These values were found by exhaustive searches using the program
+ examples/enough.c found in the zlib distribtution. The arguments to that
+ program are the number of symbols, the initial root table size, and the
+ maximum bit length of a code. "enough 286 9 15" for literal/length codes
+ returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+ The initial root table size (9 or 6) is found in the fifth argument of the
+ inflate_table() calls in inflate.c and infback.c. If the root table size is
+ changed, then these maximum sizes would be need to be recalculated and
+ updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table() */
+typedef enum {
+ CODES,
+ LENS,
+ DISTS
+} codetype;
+
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+ unsigned codes, code FAR * FAR *table,
+ unsigned FAR *bits, unsigned short FAR *work));
--- /dev/null
+/* trees.c -- output deflated data using Huffman coding
+ * Copyright (C) 1995-2012 Jean-loup Gailly
+ * detect_data_type() function provided freely by Cosmin Truta, 2006
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * ALGORITHM
+ *
+ * The "deflation" process uses several Huffman trees. The more
+ * common source values are represented by shorter bit sequences.
+ *
+ * Each code tree is stored in a compressed form which is itself
+ * a Huffman encoding of the lengths of all the code strings (in
+ * ascending order by source values). The actual code strings are
+ * reconstructed from the lengths in the inflate process, as described
+ * in the deflate specification.
+ *
+ * REFERENCES
+ *
+ * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
+ * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
+ *
+ * Storer, James A.
+ * Data Compression: Methods and Theory, pp. 49-50.
+ * Computer Science Press, 1988. ISBN 0-7167-8156-5.
+ *
+ * Sedgewick, R.
+ * Algorithms, p290.
+ * Addison-Wesley, 1983. ISBN 0-201-06672-6.
+ */
+
+/* @(#) $Id$ */
+
+//-----------------------------------------------------------------------------
+// This version of zlib is modified for use within the Proxmark3 project.
+// Files from the original distribution which are not required for this
+// purpose are not included. All modifications can easily be found
+// by searching for #ifdef ZLIB_PM3_TUNED and #ifndef ZLIB_PM3_TUNED.
+//-----------------------------------------------------------------------------
+
+/* #define GEN_TREES_H */
+
+
+#include "deflate.h"
+
+#ifdef DEBUG
+# include <ctype.h>
+#endif
+
+/* ===========================================================================
+ * Constants
+ */
+
+#define MAX_BL_BITS 7
+/* Bit length codes must not exceed MAX_BL_BITS bits */
+
+#define END_BLOCK 256
+/* end of block literal code */
+
+#define REP_3_6 16
+/* repeat previous bit length 3-6 times (2 bits of repeat count) */
+
+#define REPZ_3_10 17
+/* repeat a zero length 3-10 times (3 bits of repeat count) */
+
+#define REPZ_11_138 18
+/* repeat a zero length 11-138 times (7 bits of repeat count) */
+
+local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
+ = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
+
+local const int extra_dbits[D_CODES] /* extra bits for each distance code */
+ = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
+
+local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
+ = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
+
+local const uch bl_order[BL_CODES]
+ = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
+/* The lengths of the bit length codes are sent in order of decreasing
+ * probability, to avoid transmitting the lengths for unused bit length codes.
+ */
+
+/* ===========================================================================
+ * Local data. These are initialized only once.
+ */
+
+#define DIST_CODE_LEN 512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
+local ct_data static_ltree[L_CODES+2];
+/* The static literal tree. Since the bit lengths are imposed, there is no
+ * need for the L_CODES extra codes used during heap construction. However
+ * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
+ * below).
+ */
+
+local ct_data static_dtree[D_CODES];
+/* The static distance tree. (Actually a trivial tree since all codes use
+ * 5 bits.)
+ */
+
+uch _dist_code[DIST_CODE_LEN];
+/* Distance codes. The first 256 values correspond to the distances
+ * 3 .. 258, the last 256 values correspond to the top 8 bits of
+ * the 15 bit distances.
+ */
+
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
+/* length code for each normalized match length (0 == MIN_MATCH) */
+
+local int base_length[LENGTH_CODES];
+/* First normalized length for each code (0 = MIN_MATCH) */
+
+local int base_dist[D_CODES];
+/* First normalized distance for each code (0 = distance of 1) */
+
+#else
+# include "trees.h"
+#endif /* GEN_TREES_H */
+
+struct static_tree_desc_s {
+ const ct_data *static_tree; /* static tree or NULL */
+ const intf *extra_bits; /* extra bits for each code or NULL */
+ int extra_base; /* base index for extra_bits */
+ int elems; /* max number of elements in the tree */
+ int max_length; /* max bit length for the codes */
+};
+
+local static_tree_desc static_l_desc =
+{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
+
+local static_tree_desc static_d_desc =
+{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS};
+
+local static_tree_desc static_bl_desc =
+{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS};
+
+/* ===========================================================================
+ * Local (static) routines in this file.
+ */
+
+local void tr_static_init OF((void));
+local void init_block OF((deflate_state *s));
+local void pqdownheap OF((deflate_state *s, ct_data *tree, int k));
+local void gen_bitlen OF((deflate_state *s, tree_desc *desc));
+local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count));
+local void build_tree OF((deflate_state *s, tree_desc *desc));
+local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code));
+local void send_tree OF((deflate_state *s, ct_data *tree, int max_code));
+local int build_bl_tree OF((deflate_state *s));
+local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
+ int blcodes));
+local void compress_block OF((deflate_state *s, const ct_data *ltree,
+ const ct_data *dtree));
+local int detect_data_type OF((deflate_state *s));
+local unsigned bi_reverse OF((unsigned value, int length));
+local void bi_windup OF((deflate_state *s));
+local void bi_flush OF((deflate_state *s));
+local void copy_block OF((deflate_state *s, charf *buf, unsigned len,
+ int header));
+
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
+#ifndef DEBUG
+# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
+ /* Send a code of the given tree. c and tree must not have side effects */
+
+#else /* DEBUG */
+# define send_code(s, c, tree) \
+ { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
+ send_bits(s, tree[c].Code, tree[c].Len); }
+#endif
+
+/* ===========================================================================
+ * Output a short LSB first on the stream.
+ * IN assertion: there is enough room in pendingBuf.
+ */
+#define put_short(s, w) { \
+ put_byte(s, (uch)((w) & 0xff)); \
+ put_byte(s, (uch)((ush)(w) >> 8)); \
+}
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+#ifdef DEBUG
+local void send_bits OF((deflate_state *s, int value, int length));
+
+local void send_bits(s, value, length)
+ deflate_state *s;
+ int value; /* value to send */
+ int length; /* number of bits */
+{
+ Tracevv((stderr," l %2d v %4x ", length, value));
+ Assert(length > 0 && length <= 15, "invalid length");
+ s->bits_sent += (ulg)length;
+
+ /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+ * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+ * unused bits in value.
+ */
+ if (s->bi_valid > (int)Buf_size - length) {
+ s->bi_buf |= (ush)value << s->bi_valid;
+ put_short(s, s->bi_buf);
+ s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
+ s->bi_valid += length - Buf_size;
+ } else {
+ s->bi_buf |= (ush)value << s->bi_valid;
+ s->bi_valid += length;
+ }
+}
+#else /* !DEBUG */
+
+#define send_bits(s, value, length) \
+{ int len = length;\
+ if (s->bi_valid > (int)Buf_size - len) {\
+ int val = value;\
+ s->bi_buf |= (ush)val << s->bi_valid;\
+ put_short(s, s->bi_buf);\
+ s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
+ s->bi_valid += len - Buf_size;\
+ } else {\
+ s->bi_buf |= (ush)(value) << s->bi_valid;\
+ s->bi_valid += len;\
+ }\
+}
+#endif /* DEBUG */
+
+
+/* the arguments must not have side effects */
+
+/* ===========================================================================
+ * Initialize the various 'constant' tables.
+ */
+local void tr_static_init()
+{
+#if defined(GEN_TREES_H) || !defined(STDC)
+ static int static_init_done = 0;
+ int n; /* iterates over tree elements */
+ int bits; /* bit counter */
+ int length; /* length value */
+ int code; /* code value */
+ int dist; /* distance index */
+ ush bl_count[MAX_BITS+1];
+ /* number of codes at each bit length for an optimal tree */
+
+ if (static_init_done) return;
+
+ /* For some embedded targets, global variables are not initialized: */
+#ifdef NO_INIT_GLOBAL_POINTERS
+ static_l_desc.static_tree = static_ltree;
+ static_l_desc.extra_bits = extra_lbits;
+ static_d_desc.static_tree = static_dtree;
+ static_d_desc.extra_bits = extra_dbits;
+ static_bl_desc.extra_bits = extra_blbits;
+#endif
+
+ /* Initialize the mapping length (0..255) -> length code (0..28) */
+ length = 0;
+ for (code = 0; code < LENGTH_CODES-1; code++) {
+ base_length[code] = length;
+ for (n = 0; n < (1<<extra_lbits[code]); n++) {
+ _length_code[length++] = (uch)code;
+ }
+ }
+ Assert (length == 256, "tr_static_init: length != 256");
+ /* Note that the length 255 (match length 258) can be represented
+ * in two different ways: code 284 + 5 bits or code 285, so we
+ * overwrite length_code[255] to use the best encoding:
+ */
+ _length_code[length-1] = (uch)code;
+
+ /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+ dist = 0;
+ for (code = 0 ; code < 16; code++) {
+ base_dist[code] = dist;
+ for (n = 0; n < (1<<extra_dbits[code]); n++) {
+ _dist_code[dist++] = (uch)code;
+ }
+ }
+ Assert (dist == 256, "tr_static_init: dist != 256");
+ dist >>= 7; /* from now on, all distances are divided by 128 */
+ for ( ; code < D_CODES; code++) {
+ base_dist[code] = dist << 7;
+ for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
+ _dist_code[256 + dist++] = (uch)code;
+ }
+ }
+ Assert (dist == 256, "tr_static_init: 256+dist != 512");
+
+ /* Construct the codes of the static literal tree */
+ for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
+ n = 0;
+ while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
+ while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
+ while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
+ while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
+ /* Codes 286 and 287 do not exist, but we must include them in the
+ * tree construction to get a canonical Huffman tree (longest code
+ * all ones)
+ */
+ gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
+
+ /* The static distance tree is trivial: */
+ for (n = 0; n < D_CODES; n++) {
+ static_dtree[n].Len = 5;
+ static_dtree[n].Code = bi_reverse((unsigned)n, 5);
+ }
+ static_init_done = 1;
+
+# ifdef GEN_TREES_H
+ gen_trees_header();
+# endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
+}
+
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+# ifndef DEBUG
+# include <stdio.h>
+# endif
+
+# define SEPARATOR(i, last, width) \
+ ((i) == (last)? "\n};\n\n" : \
+ ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+ FILE *header = fopen("trees.h", "w");
+ int i;
+
+ Assert (header != NULL, "Can't open trees.h");
+ fprintf(header,
+ "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+ fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+ for (i = 0; i < L_CODES+2; i++) {
+ fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+ static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+ }
+
+ fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+ for (i = 0; i < D_CODES; i++) {
+ fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+ static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+ }
+
+ fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
+ for (i = 0; i < DIST_CODE_LEN; i++) {
+ fprintf(header, "%2u%s", _dist_code[i],
+ SEPARATOR(i, DIST_CODE_LEN-1, 20));
+ }
+
+ fprintf(header,
+ "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+ for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+ fprintf(header, "%2u%s", _length_code[i],
+ SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+ }
+
+ fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+ for (i = 0; i < LENGTH_CODES; i++) {
+ fprintf(header, "%1u%s", base_length[i],
+ SEPARATOR(i, LENGTH_CODES-1, 20));
+ }
+
+ fprintf(header, "local const int base_dist[D_CODES] = {\n");
+ for (i = 0; i < D_CODES; i++) {
+ fprintf(header, "%5u%s", base_dist[i],
+ SEPARATOR(i, D_CODES-1, 10));
+ }
+
+ fclose(header);
+}
+#endif /* GEN_TREES_H */
+
+/* ===========================================================================
+ * Initialize the tree data structures for a new zlib stream.
+ */
+void ZLIB_INTERNAL _tr_init(s)
+ deflate_state *s;
+{
+ tr_static_init();
+
+ s->l_desc.dyn_tree = s->dyn_ltree;
+ s->l_desc.stat_desc = &static_l_desc;
+
+ s->d_desc.dyn_tree = s->dyn_dtree;
+ s->d_desc.stat_desc = &static_d_desc;
+
+ s->bl_desc.dyn_tree = s->bl_tree;
+ s->bl_desc.stat_desc = &static_bl_desc;
+
+ s->bi_buf = 0;
+ s->bi_valid = 0;
+#ifdef DEBUG
+ s->compressed_len = 0L;
+ s->bits_sent = 0L;
+#endif
+
+ /* Initialize the first block of the first file: */
+ init_block(s);
+}
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+local void init_block(s)
+ deflate_state *s;
+{
+ int n; /* iterates over tree elements */
+
+ /* Initialize the trees. */
+ for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0;
+ for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0;
+ for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
+
+ s->dyn_ltree[END_BLOCK].Freq = 1;
+ s->opt_len = s->static_len = 0L;
+ s->last_lit = s->matches = 0;
+}
+
+#define SMALLEST 1
+/* Index within the heap array of least frequent node in the Huffman tree */
+
+
+/* ===========================================================================
+ * Remove the smallest element from the heap and recreate the heap with
+ * one less element. Updates heap and heap_len.
+ */
+#define pqremove(s, tree, top) \
+{\
+ top = s->heap[SMALLEST]; \
+ s->heap[SMALLEST] = s->heap[s->heap_len--]; \
+ pqdownheap(s, tree, SMALLEST); \
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+#define smaller(tree, n, m, depth) \
+ (tree[n].Freq < tree[m].Freq || \
+ (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+local void pqdownheap(s, tree, k)
+ deflate_state *s;
+ ct_data *tree; /* the tree to restore */
+ int k; /* node to move down */
+{
+ int v = s->heap[k];
+ int j = k << 1; /* left son of k */
+ while (j <= s->heap_len) {
+ /* Set j to the smallest of the two sons: */
+ if (j < s->heap_len &&
+ smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
+ j++;
+ }
+ /* Exit if v is smaller than both sons */
+ if (smaller(tree, v, s->heap[j], s->depth)) break;
+
+ /* Exchange v with the smallest son */
+ s->heap[k] = s->heap[j]; k = j;
+
+ /* And continue down the tree, setting j to the left son of k */
+ j <<= 1;
+ }
+ s->heap[k] = v;
+}
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ * above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ * array bl_count contains the frequencies for each bit length.
+ * The length opt_len is updated; static_len is also updated if stree is
+ * not null.
+ */
+local void gen_bitlen(s, desc)
+ deflate_state *s;
+ tree_desc *desc; /* the tree descriptor */
+{
+ ct_data *tree = desc->dyn_tree;
+ int max_code = desc->max_code;
+ const ct_data *stree = desc->stat_desc->static_tree;
+ const intf *extra = desc->stat_desc->extra_bits;
+ int base = desc->stat_desc->extra_base;
+ int max_length = desc->stat_desc->max_length;
+ int h; /* heap index */
+ int n, m; /* iterate over the tree elements */
+ int bits; /* bit length */
+ int xbits; /* extra bits */
+ ush f; /* frequency */
+ int overflow = 0; /* number of elements with bit length too large */
+
+ for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
+
+ /* In a first pass, compute the optimal bit lengths (which may
+ * overflow in the case of the bit length tree).
+ */
+ tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
+
+ for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
+ n = s->heap[h];
+ bits = tree[tree[n].Dad].Len + 1;
+ if (bits > max_length) bits = max_length, overflow++;
+ tree[n].Len = (ush)bits;
+ /* We overwrite tree[n].Dad which is no longer needed */
+
+ if (n > max_code) continue; /* not a leaf node */
+
+ s->bl_count[bits]++;
+ xbits = 0;
+ if (n >= base) xbits = extra[n-base];
+ f = tree[n].Freq;
+ s->opt_len += (ulg)f * (bits + xbits);
+ if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
+ }
+ if (overflow == 0) return;
+
+ Trace((stderr,"\nbit length overflow\n"));
+ /* This happens for example on obj2 and pic of the Calgary corpus */
+
+ /* Find the first bit length which could increase: */
+ do {
+ bits = max_length-1;
+ while (s->bl_count[bits] == 0) bits--;
+ s->bl_count[bits]--; /* move one leaf down the tree */
+ s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
+ s->bl_count[max_length]--;
+ /* The brother of the overflow item also moves one step up,
+ * but this does not affect bl_count[max_length]
+ */
+ overflow -= 2;
+ } while (overflow > 0);
+
+ /* Now recompute all bit lengths, scanning in increasing frequency.
+ * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+ * lengths instead of fixing only the wrong ones. This idea is taken
+ * from 'ar' written by Haruhiko Okumura.)
+ */
+ for (bits = max_length; bits != 0; bits--) {
+ n = s->bl_count[bits];
+ while (n != 0) {
+ m = s->heap[--h];
+ if (m > max_code) continue;
+ if ((unsigned) tree[m].Len != (unsigned) bits) {
+ Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
+ s->opt_len += ((long)bits - (long)tree[m].Len)
+ *(long)tree[m].Freq;
+ tree[m].Len = (ush)bits;
+ }
+ n--;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ * zero code length.
+ */
+local void gen_codes (tree, max_code, bl_count)
+ ct_data *tree; /* the tree to decorate */
+ int max_code; /* largest code with non zero frequency */
+ ushf *bl_count; /* number of codes at each bit length */
+{
+ ush next_code[MAX_BITS+1]; /* next code value for each bit length */
+ ush code = 0; /* running code value */
+ int bits; /* bit index */
+ int n; /* code index */
+
+ /* The distribution counts are first used to generate the code values
+ * without bit reversal.
+ */
+ for (bits = 1; bits <= MAX_BITS; bits++) {
+ next_code[bits] = code = (code + bl_count[bits-1]) << 1;
+ }
+ /* Check that the bit counts in bl_count are consistent. The last code
+ * must be all ones.
+ */
+ Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
+ "inconsistent bit counts");
+ Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
+
+ for (n = 0; n <= max_code; n++) {
+ int len = tree[n].Len;
+ if (len == 0) continue;
+ /* Now reverse the bits */
+ tree[n].Code = bi_reverse(next_code[len]++, len);
+
+ Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
+ n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
+ }
+}
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ * and corresponding code. The length opt_len is updated; static_len is
+ * also updated if stree is not null. The field max_code is set.
+ */
+local void build_tree(s, desc)
+ deflate_state *s;
+ tree_desc *desc; /* the tree descriptor */
+{
+ ct_data *tree = desc->dyn_tree;
+ const ct_data *stree = desc->stat_desc->static_tree;
+ int elems = desc->stat_desc->elems;
+ int n, m; /* iterate over heap elements */
+ int max_code = -1; /* largest code with non zero frequency */
+ int node; /* new node being created */
+
+ /* Construct the initial heap, with least frequent element in
+ * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+ * heap[0] is not used.
+ */
+ s->heap_len = 0, s->heap_max = HEAP_SIZE;
+
+ for (n = 0; n < elems; n++) {
+ if (tree[n].Freq != 0) {
+ s->heap[++(s->heap_len)] = max_code = n;
+ s->depth[n] = 0;
+ } else {
+ tree[n].Len = 0;
+ }
+ }
+
+ /* The pkzip format requires that at least one distance code exists,
+ * and that at least one bit should be sent even if there is only one
+ * possible code. So to avoid special checks later on we force at least
+ * two codes of non zero frequency.
+ */
+ while (s->heap_len < 2) {
+ node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
+ tree[node].Freq = 1;
+ s->depth[node] = 0;
+ s->opt_len--; if (stree) s->static_len -= stree[node].Len;
+ /* node is 0 or 1 so it does not have extra bits */
+ }
+ desc->max_code = max_code;
+
+ /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+ * establish sub-heaps of increasing lengths:
+ */
+ for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
+
+ /* Construct the Huffman tree by repeatedly combining the least two
+ * frequent nodes.
+ */
+ node = elems; /* next internal node of the tree */
+ do {
+ pqremove(s, tree, n); /* n = node of least frequency */
+ m = s->heap[SMALLEST]; /* m = node of next least frequency */
+
+ s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
+ s->heap[--(s->heap_max)] = m;
+
+ /* Create a new node father of n and m */
+ tree[node].Freq = tree[n].Freq + tree[m].Freq;
+ s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ?
+ s->depth[n] : s->depth[m]) + 1);
+ tree[n].Dad = tree[m].Dad = (ush)node;
+#ifdef DUMP_BL_TREE
+ if (tree == s->bl_tree) {
+ fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
+ node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
+ }
+#endif
+ /* and insert the new node in the heap */
+ s->heap[SMALLEST] = node++;
+ pqdownheap(s, tree, SMALLEST);
+
+ } while (s->heap_len >= 2);
+
+ s->heap[--(s->heap_max)] = s->heap[SMALLEST];
+
+ /* At this point, the fields freq and dad are set. We can now
+ * generate the bit lengths.
+ */
+ gen_bitlen(s, (tree_desc *)desc);
+
+ /* The field len is now set, we can generate the bit codes */
+ gen_codes ((ct_data *)tree, max_code, s->bl_count);
+}
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree.
+ */
+local void scan_tree (s, tree, max_code)
+ deflate_state *s;
+ ct_data *tree; /* the tree to be scanned */
+ int max_code; /* and its largest code of non zero frequency */
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].Len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ if (nextlen == 0) max_count = 138, min_count = 3;
+ tree[max_code+1].Len = (ush)0xffff; /* guard */
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].Len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ s->bl_tree[curlen].Freq += count;
+ } else if (curlen != 0) {
+ if (curlen != prevlen) s->bl_tree[curlen].Freq++;
+ s->bl_tree[REP_3_6].Freq++;
+ } else if (count <= 10) {
+ s->bl_tree[REPZ_3_10].Freq++;
+ } else {
+ s->bl_tree[REPZ_11_138].Freq++;
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+local void send_tree (s, tree, max_code)
+ deflate_state *s;
+ ct_data *tree; /* the tree to be scanned */
+ int max_code; /* and its largest code of non zero frequency */
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].Len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ /* tree[max_code+1].Len = -1; */ /* guard already set */
+ if (nextlen == 0) max_count = 138, min_count = 3;
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].Len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
+
+ } else if (curlen != 0) {
+ if (curlen != prevlen) {
+ send_code(s, curlen, s->bl_tree); count--;
+ }
+ Assert(count >= 3 && count <= 6, " 3_6?");
+ send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
+
+ } else if (count <= 10) {
+ send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
+
+ } else {
+ send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+local int build_bl_tree(s)
+ deflate_state *s;
+{
+ int max_blindex; /* index of last bit length code of non zero freq */
+
+ /* Determine the bit length frequencies for literal and distance trees */
+ scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
+ scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
+
+ /* Build the bit length tree: */
+ build_tree(s, (tree_desc *)(&(s->bl_desc)));
+ /* opt_len now includes the length of the tree representations, except
+ * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+ */
+
+ /* Determine the number of bit length codes to send. The pkzip format
+ * requires that at least 4 bit length codes be sent. (appnote.txt says
+ * 3 but the actual value used is 4.)
+ */
+ for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
+ if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
+ }
+ /* Update opt_len to include the bit length tree and counts */
+ s->opt_len += 3*(max_blindex+1) + 5+5+4;
+ Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
+ s->opt_len, s->static_len));
+
+ return max_blindex;
+}
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+local void send_all_trees(s, lcodes, dcodes, blcodes)
+ deflate_state *s;
+ int lcodes, dcodes, blcodes; /* number of codes for each tree */
+{
+ int rank; /* index in bl_order */
+
+ Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+ Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
+ "too many codes");
+ Tracev((stderr, "\nbl counts: "));
+ send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
+ send_bits(s, dcodes-1, 5);
+ send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */
+ for (rank = 0; rank < blcodes; rank++) {
+ Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
+ send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
+ }
+ Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
+
+ send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
+ Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
+
+ send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
+ Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
+}
+
+/* ===========================================================================
+ * Send a stored block
+ */
+void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
+ deflate_state *s;
+ charf *buf; /* input block */
+ ulg stored_len; /* length of input block */
+ int last; /* one if this is the last block for a file */
+{
+ send_bits(s, (STORED_BLOCK<<1)+last, 3); /* send block type */
+#ifdef DEBUG
+ s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
+ s->compressed_len += (stored_len + 4) << 3;
+#endif
+ copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
+}
+
+/* ===========================================================================
+ * Flush the bits in the bit buffer to pending output (leaves at most 7 bits)
+ */
+void ZLIB_INTERNAL _tr_flush_bits(s)
+ deflate_state *s;
+{
+ bi_flush(s);
+}
+
+/* ===========================================================================
+ * Send one empty static block to give enough lookahead for inflate.
+ * This takes 10 bits, of which 7 may remain in the bit buffer.
+ */
+void ZLIB_INTERNAL _tr_align(s)
+ deflate_state *s;
+{
+ send_bits(s, STATIC_TREES<<1, 3);
+ send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
+ s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
+#endif
+ bi_flush(s);
+}
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file.
+ */
+void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
+ deflate_state *s;
+ charf *buf; /* input block, or NULL if too old */
+ ulg stored_len; /* length of input block */
+ int last; /* one if this is the last block for a file */
+{
+ int max_blindex = 0; /* index of last bit length code of non zero freq */
+#ifndef ZLIB_PM3_TUNED
+ ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
+
+ /* Build the Huffman trees unless a stored block is forced */
+ if (s->level > 0) {
+#endif
+ /* Check if the file is binary or text */
+ if (s->strm->data_type == Z_UNKNOWN)
+ s->strm->data_type = detect_data_type(s);
+
+ /* Construct the literal and distance trees */
+ build_tree(s, (tree_desc *)(&(s->l_desc)));
+ Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
+ s->static_len));
+
+ build_tree(s, (tree_desc *)(&(s->d_desc)));
+ Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
+ s->static_len));
+ /* At this point, opt_len and static_len are the total bit lengths of
+ * the compressed block data, excluding the tree representations.
+ */
+
+ /* Build the bit length tree for the above two trees, and get the index
+ * in bl_order of the last bit length code to send.
+ */
+ max_blindex = build_bl_tree(s);
+
+#ifndef ZLIB_PM3_TUNED
+ /* Determine the best encoding. Compute the block lengths in bytes. */
+ opt_lenb = (s->opt_len+3+7)>>3;
+ static_lenb = (s->static_len+3+7)>>3;
+
+ Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
+ opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
+ s->last_lit));
+
+ if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
+
+ } else {
+ Assert(buf != (char*)0, "lost buf");
+ opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
+ }
+
+#ifdef FORCE_STORED
+ if (buf != (char*)0) { /* force stored block */
+#else
+ if (stored_len+4 <= opt_lenb && buf != (char*)0) {
+ /* 4: two words for the lengths */
+#endif
+ /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+ * Otherwise we can't have processed more than WSIZE input bytes since
+ * the last block flush, because compression would have been
+ * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+ * transform a block into a stored block.
+ */
+ _tr_stored_block(s, buf, stored_len, last);
+
+#ifdef FORCE_STATIC
+ } else if (static_lenb >= 0) { /* force static trees */
+#else
+ } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
+#endif
+ send_bits(s, (STATIC_TREES<<1)+last, 3);
+ compress_block(s, (const ct_data *)static_ltree,
+ (const ct_data *)static_dtree);
+#ifdef DEBUG
+ s->compressed_len += 3 + s->static_len;
+#endif
+ } else {
+#endif /* !ZLIB_PM3_TUNED */
+ send_bits(s, (DYN_TREES<<1)+last, 3);
+ send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
+ max_blindex+1);
+ compress_block(s, (const ct_data *)s->dyn_ltree,
+ (const ct_data *)s->dyn_dtree);
+#ifdef DEBUG
+ s->compressed_len += 3 + s->opt_len;
+#endif
+#ifndef ZLIB_PM3_TUNED
+ }
+#endif
+ Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+ /* The above check is made mod 2^32, for files larger than 512 MB
+ * and uLong implemented on 32 bits.
+ */
+ init_block(s);
+
+ if (last) {
+ bi_windup(s);
+#ifdef DEBUG
+ s->compressed_len += 7; /* align on byte boundary */
+#endif
+ }
+ Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
+ s->compressed_len-7*last));
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+int ZLIB_INTERNAL _tr_tally (s, dist, lc)
+ deflate_state *s;
+ unsigned dist; /* distance of matched string */
+ unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */
+{
+ s->d_buf[s->last_lit] = (ush)dist;
+ s->l_buf[s->last_lit++] = (uch)lc;
+ if (dist == 0) {
+ /* lc is the unmatched char */
+ s->dyn_ltree[lc].Freq++;
+ } else {
+ s->matches++;
+ /* Here, lc is the match length - MIN_MATCH */
+ dist--; /* dist = match distance - 1 */
+ Assert((ush)dist < (ush)MAX_DIST(s) &&
+ (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
+ (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match");
+
+ s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
+ s->dyn_dtree[d_code(dist)].Freq++;
+ }
+
+#ifdef TRUNCATE_BLOCK
+ /* Try to guess if it is profitable to stop the current block here */
+ if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
+ /* Compute an upper bound for the compressed length */
+ ulg out_length = (ulg)s->last_lit*8L;
+ ulg in_length = (ulg)((long)s->strstart - s->block_start);
+ int dcode;
+ for (dcode = 0; dcode < D_CODES; dcode++) {
+ out_length += (ulg)s->dyn_dtree[dcode].Freq *
+ (5L+extra_dbits[dcode]);
+ }
+ out_length >>= 3;
+ Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
+ s->last_lit, in_length, out_length,
+ 100L - out_length*100L/in_length));
+ if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
+ }
+#endif
+ return (s->last_lit == s->lit_bufsize-1);
+ /* We avoid equality with lit_bufsize because of wraparound at 64K
+ * on 16 bit machines and because stored blocks are restricted to
+ * 64K-1 bytes.
+ */
+}
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+local void compress_block(s, ltree, dtree)
+ deflate_state *s;
+ const ct_data *ltree; /* literal tree */
+ const ct_data *dtree; /* distance tree */
+{
+ unsigned dist; /* distance of matched string */
+ int lc; /* match length or unmatched char (if dist == 0) */
+ unsigned lx = 0; /* running index in l_buf */
+ unsigned code; /* the code to send */
+ int extra; /* number of extra bits to send */
+
+ if (s->last_lit != 0) do {
+ dist = s->d_buf[lx];
+ lc = s->l_buf[lx++];
+ if (dist == 0) {
+ send_code(s, lc, ltree); /* send a literal byte */
+ Tracecv(isgraph(lc), (stderr," '%c' ", lc));
+ } else {
+ /* Here, lc is the match length - MIN_MATCH */
+ code = _length_code[lc];
+ send_code(s, code+LITERALS+1, ltree); /* send the length code */
+ extra = extra_lbits[code];
+ if (extra != 0) {
+ lc -= base_length[code];
+ send_bits(s, lc, extra); /* send the extra length bits */
+ }
+ dist--; /* dist is now the match distance - 1 */
+ code = d_code(dist);
+ Assert (code < D_CODES, "bad d_code");
+
+ send_code(s, code, dtree); /* send the distance code */
+ extra = extra_dbits[code];
+ if (extra != 0) {
+ dist -= base_dist[code];
+ send_bits(s, dist, extra); /* send the extra distance bits */
+ }
+ } /* literal or match pair ? */
+
+ /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
+ Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx,
+ "pendingBuf overflow");
+
+ } while (lx < s->last_lit);
+
+ send_code(s, END_BLOCK, ltree);
+}
+
+/* ===========================================================================
+ * Check if the data type is TEXT or BINARY, using the following algorithm:
+ * - TEXT if the two conditions below are satisfied:
+ * a) There are no non-portable control characters belonging to the
+ * "black list" (0..6, 14..25, 28..31).
+ * b) There is at least one printable character belonging to the
+ * "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
+ * - BINARY otherwise.
+ * - The following partially-portable control characters form a
+ * "gray list" that is ignored in this detection algorithm:
+ * (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
+ * IN assertion: the fields Freq of dyn_ltree are set.
+ */
+local int detect_data_type(s)
+ deflate_state *s;
+{
+ /* black_mask is the bit mask of black-listed bytes
+ * set bits 0..6, 14..25, and 28..31
+ * 0xf3ffc07f = binary 11110011111111111100000001111111
+ */
+ unsigned long black_mask = 0xf3ffc07fUL;
+ int n;
+
+ /* Check for non-textual ("black-listed") bytes. */
+ for (n = 0; n <= 31; n++, black_mask >>= 1)
+ if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0))
+ return Z_BINARY;
+
+ /* Check for textual ("white-listed") bytes. */
+ if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
+ || s->dyn_ltree[13].Freq != 0)
+ return Z_TEXT;
+ for (n = 32; n < LITERALS; n++)
+ if (s->dyn_ltree[n].Freq != 0)
+ return Z_TEXT;
+
+ /* There are no "black-listed" or "white-listed" bytes:
+ * this stream either is empty or has tolerated ("gray-listed") bytes only.
+ */
+ return Z_BINARY;
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+local unsigned bi_reverse(code, len)
+ unsigned code; /* the value to invert */
+ int len; /* its bit length */
+{
+ register unsigned res = 0;
+ do {
+ res |= code & 1;
+ code >>= 1, res <<= 1;
+ } while (--len > 0);
+ return res >> 1;
+}
+
+/* ===========================================================================
+ * Flush the bit buffer, keeping at most 7 bits in it.
+ */
+local void bi_flush(s)
+ deflate_state *s;
+{
+ if (s->bi_valid == 16) {
+ put_short(s, s->bi_buf);
+ s->bi_buf = 0;
+ s->bi_valid = 0;
+ } else if (s->bi_valid >= 8) {
+ put_byte(s, (Byte)s->bi_buf);
+ s->bi_buf >>= 8;
+ s->bi_valid -= 8;
+ }
+}
+
+/* ===========================================================================
+ * Flush the bit buffer and align the output on a byte boundary
+ */
+local void bi_windup(s)
+ deflate_state *s;
+{
+ if (s->bi_valid > 8) {
+ put_short(s, s->bi_buf);
+ } else if (s->bi_valid > 0) {
+ put_byte(s, (Byte)s->bi_buf);
+ }
+ s->bi_buf = 0;
+ s->bi_valid = 0;
+#ifdef DEBUG
+ s->bits_sent = (s->bits_sent+7) & ~7;
+#endif
+}
+
+/* ===========================================================================
+ * Copy a stored block, storing first the length and its
+ * one's complement if requested.
+ */
+local void copy_block(s, buf, len, header)
+ deflate_state *s;
+ charf *buf; /* the input data */
+ unsigned len; /* its length */
+ int header; /* true if block header must be written */
+{
+ bi_windup(s); /* align on byte boundary */
+
+ if (header) {
+ put_short(s, (ush)len);
+ put_short(s, (ush)~len);
+#ifdef DEBUG
+ s->bits_sent += 2*16;
+#endif
+ }
+#ifdef DEBUG
+ s->bits_sent += (ulg)len<<3;
+#endif
+ while (len--) {
+ put_byte(s, *buf++);
+ }
+}
--- /dev/null
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}},
+{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}},
+{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}},
+{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}},
+{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}},
+{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}},
+{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}},
+{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}},
+{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}},
+{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}},
+{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}},
+{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}},
+{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}},
+{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}},
+{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}},
+{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}},
+{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}},
+{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}},
+{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}},
+{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}},
+{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}},
+{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}},
+{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}},
+{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}},
+{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}},
+{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}},
+{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}},
+{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}},
+{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}},
+{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}},
+{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}},
+{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}},
+{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}},
+{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}},
+{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}},
+{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}},
+{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}},
+{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}},
+{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}},
+{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}},
+{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}},
+{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}},
+{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}},
+{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}},
+{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}},
+{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}},
+{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}},
+{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}},
+{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}},
+{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}},
+{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}},
+{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}},
+{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}},
+{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}},
+{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}},
+{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}},
+{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}},
+{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
+ 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8,
+ 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+ 0, 1, 2, 3, 4, 6, 8, 12, 16, 24,
+ 32, 48, 64, 96, 128, 192, 256, 384, 512, 768,
+ 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576
+};
+
--- /dev/null
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
+# define Z_PREFIX_SET
+
+/* all linked symbols */
+# define _dist_code z__dist_code
+# define _length_code z__length_code
+# define _tr_align z__tr_align
+# define _tr_flush_bits z__tr_flush_bits
+# define _tr_flush_block z__tr_flush_block
+# define _tr_init z__tr_init
+# define _tr_stored_block z__tr_stored_block
+# define _tr_tally z__tr_tally
+# define adler32 z_adler32
+# define adler32_combine z_adler32_combine
+# define adler32_combine64 z_adler32_combine64
+# ifndef Z_SOLO
+# define compress z_compress
+# define compress2 z_compress2
+# define compressBound z_compressBound
+# endif
+# define crc32 z_crc32
+# define crc32_combine z_crc32_combine
+# define crc32_combine64 z_crc32_combine64
+# define deflate z_deflate
+# define deflateBound z_deflateBound
+# define deflateCopy z_deflateCopy
+# define deflateEnd z_deflateEnd
+# define deflateInit2_ z_deflateInit2_
+# define deflateInit_ z_deflateInit_
+# define deflateParams z_deflateParams
+# define deflatePending z_deflatePending
+# define deflatePrime z_deflatePrime
+# define deflateReset z_deflateReset
+# define deflateResetKeep z_deflateResetKeep
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateSetHeader z_deflateSetHeader
+# define deflateTune z_deflateTune
+# define deflate_copyright z_deflate_copyright
+# define get_crc_table z_get_crc_table
+# ifndef Z_SOLO
+# define gz_error z_gz_error
+# define gz_intmax z_gz_intmax
+# define gz_strwinerror z_gz_strwinerror
+# define gzbuffer z_gzbuffer
+# define gzclearerr z_gzclearerr
+# define gzclose z_gzclose
+# define gzclose_r z_gzclose_r
+# define gzclose_w z_gzclose_w
+# define gzdirect z_gzdirect
+# define gzdopen z_gzdopen
+# define gzeof z_gzeof
+# define gzerror z_gzerror
+# define gzflush z_gzflush
+# define gzgetc z_gzgetc
+# define gzgetc_ z_gzgetc_
+# define gzgets z_gzgets
+# define gzoffset z_gzoffset
+# define gzoffset64 z_gzoffset64
+# define gzopen z_gzopen
+# define gzopen64 z_gzopen64
+# ifdef _WIN32
+# define gzopen_w z_gzopen_w
+# endif
+# define gzprintf z_gzprintf
+# define gzvprintf z_gzvprintf
+# define gzputc z_gzputc
+# define gzputs z_gzputs
+# define gzread z_gzread
+# define gzrewind z_gzrewind
+# define gzseek z_gzseek
+# define gzseek64 z_gzseek64
+# define gzsetparams z_gzsetparams
+# define gztell z_gztell
+# define gztell64 z_gztell64
+# define gzungetc z_gzungetc
+# define gzwrite z_gzwrite
+# endif
+# define inflate z_inflate
+# define inflateBack z_inflateBack
+# define inflateBackEnd z_inflateBackEnd
+# define inflateBackInit_ z_inflateBackInit_
+# define inflateCopy z_inflateCopy
+# define inflateEnd z_inflateEnd
+# define inflateGetHeader z_inflateGetHeader
+# define inflateInit2_ z_inflateInit2_
+# define inflateInit_ z_inflateInit_
+# define inflateMark z_inflateMark
+# define inflatePrime z_inflatePrime
+# define inflateReset z_inflateReset
+# define inflateReset2 z_inflateReset2
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateGetDictionary z_inflateGetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateUndermine z_inflateUndermine
+# define inflateResetKeep z_inflateResetKeep
+# define inflate_copyright z_inflate_copyright
+# define inflate_fast z_inflate_fast
+# define inflate_table z_inflate_table
+# ifndef Z_SOLO
+# define uncompress z_uncompress
+# endif
+# define zError z_zError
+# ifndef Z_SOLO
+# define zcalloc z_zcalloc
+# define zcfree z_zcfree
+# endif
+# define zlibCompileFlags z_zlibCompileFlags
+# define zlibVersion z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+# define Byte z_Byte
+# define Bytef z_Bytef
+# define alloc_func z_alloc_func
+# define charf z_charf
+# define free_func z_free_func
+# ifndef Z_SOLO
+# define gzFile z_gzFile
+# endif
+# define gz_header z_gz_header
+# define gz_headerp z_gz_headerp
+# define in_func z_in_func
+# define intf z_intf
+# define out_func z_out_func
+# define uInt z_uInt
+# define uIntf z_uIntf
+# define uLong z_uLong
+# define uLongf z_uLongf
+# define voidp z_voidp
+# define voidpc z_voidpc
+# define voidpf z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+# define gz_header_s z_gz_header_s
+# define internal_state z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+# define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+# define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+# define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+# ifndef SYS16BIT
+# define SYS16BIT
+# endif
+# endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+# define MAXSEG_64K
+#endif
+#ifdef MSDOS
+# define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+# ifndef STDC
+# define STDC
+# endif
+# if __STDC_VERSION__ >= 199901L
+# ifndef STDC99
+# define STDC99
+# endif
+# endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+# define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+# define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
+# define STDC
+#endif
+
+#ifndef STDC
+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+# define const /* note: need a more gentle solution here */
+# endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+# define z_const const
+#else
+# define z_const
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
+# define NO_DUMMY_DECL
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ (1 << (windowBits+2)) + (1 << (memLevel+9))
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+# if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# define Z_ARG(args) args
+# else
+# define Z_ARG(args) ()
+# endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+# if defined(M_I86SM) || defined(M_I86MM)
+ /* MSC small or medium model */
+# define SMALL_MEDIUM
+# ifdef _MSC_VER
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+# if (defined(__SMALL__) || defined(__MEDIUM__))
+ /* Turbo C small or medium model */
+# define SMALL_MEDIUM
+# ifdef __BORLANDC__
+# define FAR _far
+# else
+# define FAR far
+# endif
+# endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+ /* If building or using zlib as a DLL, define ZLIB_DLL.
+ * This is not mandatory, but it offers a little performance increase.
+ */
+# ifdef ZLIB_DLL
+# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+# ifdef ZLIB_INTERNAL
+# define ZEXTERN extern __declspec(dllexport)
+# else
+# define ZEXTERN extern __declspec(dllimport)
+# endif
+# endif
+# endif /* ZLIB_DLL */
+ /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+ * define ZLIB_WINAPI.
+ * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+ */
+# ifdef ZLIB_WINAPI
+# ifdef FAR
+# undef FAR
+# endif
+# include <windows.h>
+ /* No need for _export, use ZLIB.DEF instead. */
+ /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+# define ZEXPORT WINAPI
+# ifdef WIN32
+# define ZEXPORTVA WINAPIV
+# else
+# define ZEXPORTVA FAR CDECL
+# endif
+# endif
+#endif
+
+#if defined (__BEOS__)
+# ifdef ZLIB_DLL
+# ifdef ZLIB_INTERNAL
+# define ZEXPORT __declspec(dllexport)
+# define ZEXPORTVA __declspec(dllexport)
+# else
+# define ZEXPORT __declspec(dllimport)
+# define ZEXPORTVA __declspec(dllimport)
+# endif
+# endif
+#endif
+
+#ifndef ZEXTERN
+# define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+# define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+# define ZEXPORTVA
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char Byte; /* 8 bits */
+#endif
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+ /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+# define Bytef Byte FAR
+#else
+ typedef Byte FAR Bytef;
+#endif
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void const *voidpc;
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte const *voidpc;
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+# include <limits.h>
+# if (UINT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned
+# elif (ULONG_MAX == 0xffffffffUL)
+# define Z_U4 unsigned long
+# elif (USHRT_MAX == 0xffffffffUL)
+# define Z_U4 unsigned short
+# endif
+#endif
+
+#ifdef Z_U4
+ typedef Z_U4 z_crc_t;
+#else
+ typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+# ifndef Z_SOLO
+# include <sys/types.h> /* for off_t */
+# endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+# include <stdarg.h> /* for va_list */
+# endif
+#endif
+
+#ifdef _WIN32
+# ifndef Z_SOLO
+# include <stddef.h> /* for wchar_t */
+# endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+# undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+# define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+# ifdef VMS
+# include <unixio.h> /* for off_t */
+# endif
+# ifndef z_off_t
+# define z_off_t off_t
+# endif
+# endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+# define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+# define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+# define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+# define SEEK_SET 0 /* Seek from beginning of file. */
+# define SEEK_CUR 1 /* Seek from current position. */
+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+# define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+# define z_off64_t off64_t
+#else
+# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+# define z_off64_t __int64
+# else
+# define z_off64_t z_off_t
+# endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+ #pragma map(deflateInit_,"DEIN")
+ #pragma map(deflateInit2_,"DEIN2")
+ #pragma map(deflateEnd,"DEEND")
+ #pragma map(deflateBound,"DEBND")
+ #pragma map(inflateInit_,"ININ")
+ #pragma map(inflateInit2_,"ININ2")
+ #pragma map(inflateEnd,"INEND")
+ #pragma map(inflateSync,"INSY")
+ #pragma map(inflateSetDictionary,"INSEDI")
+ #pragma map(compressBound,"CMBND")
+ #pragma map(inflate_table,"INTABL")
+ #pragma map(inflate_fast,"INFA")
+ #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
--- /dev/null
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+ version 1.2.8, April 28th, 2013
+
+ Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+ (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
+*/
+
+//-----------------------------------------------------------------------------
+// This version of zlib is modified for use within the Proxmark3 project.
+// Files from the original distribution which are not required for this
+// purpose are not included. All modifications can easily be found
+// by searching for #ifdef ZLIB_PM3_TUNED and #ifndef ZLIB_PM3_TUNED.
+//-----------------------------------------------------------------------------
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef ZLIB_PM3_TUNED
+#define ZLIB_VERSION "1.2.8"
+#define ZLIB_VERNUM 0x1280
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 8
+#define ZLIB_VER_SUBREVISION 0
+#else
+#define ZLIB_VERSION "1.2.8.f-Proxmark3"
+#define ZLIB_VERNUM 0x128f
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 8
+#define ZLIB_VER_SUBREVISION f
+#endif
+
+
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed data.
+ This version of the library supports only one compression method (deflation)
+ but other algorithms will be added later and will have the same stream
+ interface.
+
+ Compression can be done in a single step if the buffers are large enough,
+ or can be done by repeated calls of the compression function. In the latter
+ case, the application must provide more input and/or consume the output
+ (providing more output space) before each call.
+
+ The compressed data format used by default by the in-memory functions is
+ the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+ around a deflate stream, which is itself documented in RFC 1951.
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio using the functions that start
+ with "gz". The gzip format is different from the zlib format. gzip is a
+ gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+ This library can optionally read and write gzip streams in memory as well.
+
+ The zlib format was designed to be compact and fast for use in memory
+ and on communications channels. The gzip format was designed for single-
+ file compression on file systems, has a larger header than zlib to maintain
+ directory information, and uses a different, slower check method than zlib.
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never crash
+ even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void (*free_func) OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ z_const Bytef *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total number of input bytes read so far */
+
+ Bytef *next_out; /* next output byte should be put there */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total number of bytes output so far */
+
+ z_const char *msg; /* last error message, NULL if no error */
+ struct internal_state FAR *state; /* not visible by applications */
+
+ alloc_func zalloc; /* used to allocate the internal state */
+ free_func zfree; /* used to free the internal state */
+ voidpf opaque; /* private data object passed to zalloc and zfree */
+
+ int data_type; /* best guess about the data type: binary or text */
+ uLong adler; /* adler32 value of the uncompressed data */
+ uLong reserved; /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+ gzip header information passed to and from zlib routines. See RFC 1952
+ for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+ int text; /* true if compressed data believed to be text */
+ uLong time; /* modification time */
+ int xflags; /* extra flags (not used when writing a gzip file) */
+ int os; /* operating system */
+ Bytef *extra; /* pointer to extra field or Z_NULL if none */
+ uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
+ uInt extra_max; /* space at extra (only when reading header) */
+ Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
+ uInt name_max; /* space at name (only when reading header) */
+ Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
+ uInt comm_max; /* space at comment (only when reading header) */
+ int hcrc; /* true if there was or will be a header crc */
+ int done; /* true when done reading gzip header (not used
+ when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+ The application must update next_in and avail_in when avail_in has dropped
+ to zero. It must update next_out and avail_out when avail_out has dropped
+ to zero. The application must initialize zalloc, zfree and opaque before
+ calling the init function. All other fields are set by the compression
+ library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return Z_NULL if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, zalloc and zfree must be
+ thread safe.
+
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this if
+ the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers
+ returned by zalloc for objects of exactly 65536 bytes *must* have their
+ offset normalized to zero. The default allocation function provided by this
+ library ensures this (see zutil.c). To reduce memory requirements and avoid
+ any allocation of 64K objects, at the expense of compression ratio, compile
+ the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or progress
+ reports. After compression, total_in holds the total size of the
+ uncompressed data and may be saved for use in the decompressor (particularly
+ if the decompressor wants to decompress everything in a single step).
+*/
+
+ /* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH 2
+#define Z_FULL_FLUSH 3
+#define Z_FINISH 4
+#define Z_BLOCK 5
+#define Z_TREES 6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_NEED_DICT 2
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION 0
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_RLE 3
+#define Z_FIXED 4
+#define Z_DEFAULT_STRATEGY 0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY 0
+#define Z_TEXT 1
+#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN 2
+/* Possible values of the data_type field (though see inflate()) */
+
+#define Z_DEFLATED 8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+ /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is not
+ compatible with the zlib.h header file used by the application. This check
+ is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller. If
+ zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+ allocation functions.
+
+ The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at all
+ (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION
+ requests a default compromise between speed and compression (currently
+ equivalent to level 6).
+
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if level is not a valid compression level, or
+ Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION). msg is set to null
+ if there is no error message. deflateInit does not perform any compression:
+ this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+ deflate compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. deflate performs one or both of the
+ following actions:
+
+ - Compress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in and avail_in are updated and
+ processing will resume at this point for the next call of deflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications). Some
+ output may be provided even if flush is not set.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating avail_in or avail_out accordingly; avail_out should
+ never be zero before the call. The application can consume the compressed
+ output when it wants, for example when the output buffer is full (avail_out
+ == 0), or after each call of deflate(). If deflate returns Z_OK and with
+ zero avail_out, it must be called again after making room in the output
+ buffer because there might be more output pending.
+
+ Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+ decide how much data to accumulate before producing output, in order to
+ maximize compression.
+
+ If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In
+ particular avail_in is zero after the call if enough output space has been
+ provided before the call.) Flushing may degrade compression for some
+ compression algorithms and so it should be used only when necessary. This
+ completes the current deflate block and follows it with an empty stored block
+ that is three bits plus filler bits to the next byte, followed by four bytes
+ (00 00 ff ff).
+
+ If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+ output buffer, but the output is not aligned to a byte boundary. All of the
+ input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+ This completes the current deflate block and follows it with an empty fixed
+ codes block that is 10 bits long. This assures that enough bytes are output
+ in order for the decompressor to finish the block before the empty fixed code
+ block.
+
+ If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+ for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+ seven bits of the current block are held to be written as the next byte after
+ the next deflate block is completed. In this case, the decompressor may not
+ be provided enough bits at this point in order to complete decompression of
+ the data provided so far to the compressor. It may need to wait for the next
+ block to be emitted. This is for advanced applications that need to control
+ the emission of deflate blocks.
+
+ If flush is set to Z_FULL_FLUSH, all output is flushed as with
+ Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+ compression.
+
+ If deflate returns with avail_out == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ avail_out), until the flush is complete (deflate returns with non-zero
+ avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+ avail_out is greater than six to avoid repeated flush markers due to
+ avail_out == 0 on return.
+
+ If the parameter flush is set to Z_FINISH, pending input is processed,
+ pending output is flushed and deflate returns with Z_STREAM_END if there was
+ enough output space; if deflate returns with Z_OK, this function must be
+ called again with Z_FINISH and more output space (updated avail_out) but no
+ more input data, until it returns with Z_STREAM_END or an error. After
+ deflate has returned Z_STREAM_END, the only possible operations on the stream
+ are deflateReset or deflateEnd.
+
+ Z_FINISH can be used immediately after deflateInit if all the compression
+ is to be done in a single step. In this case, avail_out must be at least the
+ value returned by deflateBound (see below). Then deflate is guaranteed to
+ return Z_STREAM_END. If not enough output space is provided, deflate will
+ not return Z_STREAM_END, and it must be called again as described above.
+
+ deflate() sets strm->adler to the adler32 checksum of all input read
+ so far (that is, total_in bytes).
+
+ deflate() may update strm->data_type if it can make a good guess about
+ the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect the
+ compression algorithm in any manner.
+
+ deflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if all input has been
+ consumed and all output has been produced (only when flush is set to
+ Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+ if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
+ (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
+ fatal, and deflate() can be called again with more input and more output
+ space to continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+ stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+ prematurely (some input or output was discarded). In the error case, msg
+ may be set but then points to a static string (which must not be
+ deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+ Initializes the internal stream state for decompression. The fields
+ next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+ the caller. If next_in is not Z_NULL and avail_in is large enough (the
+ exact value depends on the compression method), inflateInit determines the
+ compression method from the zlib header and allocates all data structures
+ accordingly; otherwise the allocation will be deferred to the first call of
+ inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+ use default allocation functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit() does not process any header information -- that is deferred
+ until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+ inflate decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. inflate performs one or both of the
+ following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing will
+ resume at this point for the next call of inflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() provides as much output as possible, until there is
+ no more input data or no more space in the output buffer (see below about
+ the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating the next_* and avail_* values accordingly. The
+ application can consume the uncompressed output when it wants, for example
+ when the output buffer is full (avail_out == 0), or after each call of
+ inflate(). If inflate returns Z_OK and with zero avail_out, it must be
+ called again after making room in the output buffer because there might be
+ more output pending.
+
+ The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+ Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much
+ output as possible to the output buffer. Z_BLOCK requests that inflate()
+ stop if and when it gets to the next deflate block boundary. When decoding
+ the zlib or gzip format, this will cause inflate() to return immediately
+ after the header and before the first block. When doing a raw inflate,
+ inflate() will go ahead and process the first block, and will return when it
+ gets to the end of that block, or when it runs out of data.
+
+ The Z_BLOCK option assists in appending to or combining deflate streams.
+ Also to assist in this, on return inflate() will set strm->data_type to the
+ number of unused bits in the last byte taken from strm->next_in, plus 64 if
+ inflate() is currently decoding the last block in the deflate stream, plus
+ 128 if inflate() returned immediately after decoding an end-of-block code or
+ decoding the complete header up to just before the first byte of the deflate
+ stream. The end-of-block will not be indicated until all of the uncompressed
+ data from that block has been written to strm->next_out. The number of
+ unused bits may in general be greater than seven, except when bit 7 of
+ data_type is set, in which case the number of unused bits will be less than
+ eight. data_type is set as noted here every time inflate() returns for all
+ flush options, and so can be used to determine the amount of currently
+ consumed input in bits.
+
+ The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+ end of each deflate block header is reached, before any actual data in that
+ block is decoded. This allows the caller to determine the length of the
+ deflate block header for later use in random access within a deflate block.
+ 256 is added to the value of strm->data_type when inflate() returns
+ immediately after reaching the end of the deflate block header.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step (a
+ single call of inflate), the parameter flush should be set to Z_FINISH. In
+ this case all pending input is processed and all pending output is flushed;
+ avail_out must be large enough to hold all of the uncompressed data for the
+ operation to complete. (The size of the uncompressed data may have been
+ saved by the compressor for this purpose.) The use of Z_FINISH is not
+ required to perform an inflation in one step. However it may be used to
+ inform inflate that a faster approach can be used for the single inflate()
+ call. Z_FINISH also informs inflate to not maintain a sliding window if the
+ stream completes, which reduces inflate's memory footprint. If the stream
+ does not complete, either because not all of the stream is provided or not
+ enough output space is provided, then a sliding window will be allocated and
+ inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+ been used.
+
+ In this implementation, inflate() always flushes as much output as
+ possible to the output buffer, and always uses the faster approach on the
+ first call. So the effects of the flush parameter in this implementation are
+ on the return value of inflate() as noted below, when inflate() returns early
+ when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+ memory for a sliding window when Z_FINISH is used.
+
+ If a preset dictionary is needed after this call (see inflateSetDictionary
+ below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
+ chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+ strm->adler to the Adler-32 checksum of all output produced so far (that is,
+ total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+ below. At the end of the stream, inflate() checks that its computed adler32
+ checksum is equal to that saved by the compressor and returns Z_STREAM_END
+ only if the checksum is correct.
+
+ inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+ deflate data. The header type is detected automatically, if requested when
+ initializing with inflateInit2(). Any information contained in the gzip
+ header is not retained, so applications that need that information should
+ instead use raw inflate, see inflateInit2() below, or inflateBack() and
+ perform their own processing of the gzip header and trailer. When processing
+ gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+ producted so far. The CRC-32 is checked against the gzip trailer.
+
+ inflate() returns Z_OK if some progress has been made (more input processed
+ or more output produced), Z_STREAM_END if the end of the compressed data has
+ been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+ preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect check
+ value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+ next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
+ Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+ output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+ inflate() can be called again with more input and more output space to
+ continue decompressing. If Z_DATA_ERROR is returned, the application may
+ then call inflateSync() to look for a good compression block if a partial
+ recovery of the data is desired.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any pending
+ output.
+
+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+ was inconsistent. In the error case, msg may be set but then points to a
+ static string (which must not be deallocated).
+*/
+
+
+ /* Advanced functions */
+
+/*
+ The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+ int level,
+ int method,
+ int windowBits,
+ int memLevel,
+ int strategy));
+
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by the
+ caller.
+
+ The method parameter is the compression method. It must be Z_DEFLATED in
+ this version of the library.
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ deflateInit is used instead.
+
+ windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
+ determines the window size. deflate() will then generate raw deflate data
+ with no zlib header or trailer, and will not compute an adler32 check value.
+
+ windowBits can also be greater than 15 for optional gzip encoding. Add
+ 16 to windowBits to write a simple gzip header and trailer around the
+ compressed data instead of a zlib wrapper. The gzip header will have no
+ file name, no extra data, no comment, no modification time (set to zero), no
+ header crc, and the operating system will be set to 255 (unknown). If a
+ gzip stream is being written, strm->adler is a crc32 instead of an adler32.
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression state. memLevel=1 uses minimum memory but is
+ slow and reduces compression ratio; memLevel=9 uses maximum memory for
+ optimal speed. The default value is 8. See zconf.h for total memory usage
+ as a function of windowBits and memLevel.
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+ filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+ string match), or Z_RLE to limit match distances to one (run-length
+ encoding). Filtered data consists mostly of small values with a somewhat
+ random distribution. In this case, the compression algorithm is tuned to
+ compress them better. The effect of Z_FILTERED is to force more Huffman
+ coding and less string matching; it is somewhat intermediate between
+ Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as
+ fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The
+ strategy parameter only affects the compression ratio but not the
+ correctness of the compressed output even if it is not set appropriately.
+ Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+ decoder for special applications.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+ method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+ incompatible with the version assumed by the caller (ZLIB_VERSION). msg is
+ set to null if there is no error message. deflateInit2 does not perform any
+ compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. When using the zlib format, this
+ function must be called immediately after deflateInit, deflateInit2 or
+ deflateReset, and before any call of deflate. When doing raw deflate, this
+ function must be called either before any call of deflate, or immediately
+ after the completion of a deflate block, i.e. after all input has been
+ consumed and all output has been delivered when using any of the flush
+ options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The
+ compressor and decompressor must use exactly the same dictionary (see
+ inflateSetDictionary).
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy; the data can then be compressed better than
+ with the default empty dictionary.
+
+ Depending on the size of the compression data structures selected by
+ deflateInit or deflateInit2, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size
+ provided in deflateInit or deflateInit2. Thus the strings most likely to be
+ useful should be put at the end of the dictionary, not at the front. In
+ addition, the current implementation of deflate will use at most the window
+ size minus 262 bytes of the provided dictionary.
+
+ Upon return of this function, strm->adler is set to the adler32 value
+ of the dictionary; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.) If a raw deflate was requested, then the
+ adler32 value is not computed and strm->adler is not set.
+
+ deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent (for example if deflate has already been called for this stream
+ or if not at a block boundary for raw deflate). deflateSetDictionary does
+ not perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling deflateEnd. Note that deflateCopy duplicates the internal
+ compression state which can be quite large, so this strategy is slow and can
+ consume lots of memory.
+
+ deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to deflateEnd followed by deflateInit,
+ but does not free and reallocate all the internal compression state. The
+ stream will keep the same compression level and any other attributes that
+ may have been set by deflateInit2.
+
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+ int level,
+ int strategy));
+/*
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in deflateInit2. This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different strategy.
+ If the compression level is changed, the input available so far is
+ compressed with the old level (and may be flushed); the new level will take
+ effect only at the next call of deflate().
+
+ Before the call of deflateParams, the stream state must be set as for
+ a call of deflate(), since the currently available input may have to be
+ compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+ deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+ stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
+ strm->avail_out was zero.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+ int good_length,
+ int max_lazy,
+ int nice_length,
+ int max_chain));
+/*
+ Fine tune deflate's internal compression parameters. This should only be
+ used by someone who understands the algorithm used by zlib's deflate for
+ searching for the best matching string, and even then only by the most
+ fanatic optimizer trying to squeeze out the last compressed bit for their
+ specific input data. Read the deflate.c source code for the meaning of the
+ max_lazy, good_length, nice_length, and max_chain parameters.
+
+ deflateTune() can be called after deflateInit() or deflateInit2(), and
+ returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+ uLong sourceLen));
+/*
+ deflateBound() returns an upper bound on the compressed size after
+ deflation of sourceLen bytes. It must be called after deflateInit() or
+ deflateInit2(), and after deflateSetHeader(), if used. This would be used
+ to allocate an output buffer for deflation in a single pass, and so would be
+ called before deflate(). If that first deflate() call is provided the
+ sourceLen input bytes, an output buffer allocated to the size returned by
+ deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+ to return Z_STREAM_END. Note that it is possible for the compressed size to
+ be larger than the value returned by deflateBound() if flush options other
+ than Z_FINISH or Z_NO_FLUSH are used.
+*/
+
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+ unsigned *pending,
+ int *bits));
+/*
+ deflatePending() returns the number of bytes and bits of output that have
+ been generated, but not yet provided in the available output. The bytes not
+ provided would be due to the available output space having being consumed.
+ The number of bits of output not provided are between 0 and 7, where they
+ await more bits to join them in order to fill out a full byte. If pending
+ or bits are Z_NULL, then those values are not set.
+
+ deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+ */
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ deflatePrime() inserts bits in the deflate output stream. The intent
+ is that this function is used to start off the deflate output with the bits
+ leftover from a previous deflate stream when appending to it. As such, this
+ function can only be used for raw deflate, and must be used before the first
+ deflate() call after a deflateInit2() or deflateReset(). bits must be less
+ than or equal to 16, and that many of the least significant bits of value
+ will be inserted in the output.
+
+ deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
+ room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ deflateSetHeader() provides gzip header information for when a gzip
+ stream is requested by deflateInit2(). deflateSetHeader() may be called
+ after deflateInit2() or deflateReset() and before the first call of
+ deflate(). The text, time, os, extra field, name, and comment information
+ in the provided gz_header structure are written to the gzip header (xflag is
+ ignored -- the extra flags are set according to the compression level). The
+ caller must assure that, if not Z_NULL, name and comment are terminated with
+ a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+ available there. If hcrc is true, a gzip header crc is included. Note that
+ the current versions of the command-line version of gzip (up through version
+ 1.3.x) do not support header crc's, and will report that it is a "multi-part
+ gzip file" and give up.
+
+ If deflateSetHeader is not used, the default gzip header has text false,
+ the time set to zero, and os set to 255, with no extra, name, or comment
+ fields. The gzip header is returned to the default state by deflateReset().
+
+ deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+ int windowBits));
+
+ This is another version of inflateInit with an extra parameter. The
+ fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+ before by the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if inflateInit is used
+ instead. windowBits must be greater than or equal to the windowBits value
+ provided to deflateInit2() while compressing, or it must be equal to 15 if
+ deflateInit2() was not used. If a compressed stream with a larger window
+ size is given as input, inflate() will return with the error code
+ Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ windowBits can also be zero to request that inflate use the window size in
+ the zlib header of the compressed stream.
+
+ windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+ determines the window size. inflate() will then process raw deflate data,
+ not looking for a zlib or gzip header, not generating a check value, and not
+ looking for any check values for comparison at the end of the stream. This
+ is for use with other formats that use the deflate compressed data format
+ such as zip. Those formats provide their own check values. If a custom
+ format is developed using the raw deflate format for compressed data, it is
+ recommended that a check value such as an adler32 or a crc32 be applied to
+ the uncompressed data as is done in the zlib, gzip, and zip formats. For
+ most applications, the zlib format should be used as is. Note that comments
+ above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+ windowBits can also be greater than 15 for optional gzip decoding. Add
+ 32 to windowBits to enable zlib and gzip decoding with automatic header
+ detection, or add 16 to decode only the gzip format (the zlib format will
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
+ crc32 instead of an adler32.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit2 does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit2() does not process any header information -- that is
+ deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the adler32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called at any
+ time to set the dictionary. If the provided dictionary is smaller than the
+ window and there is already data in the window, then the provided dictionary
+ will amend what's there. The application must insure that the dictionary
+ that was used for compression is provided.
+
+ inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
+ inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+ expected one (incorrect adler32 value). inflateSetDictionary does not
+ perform any decompression: this will be done by subsequent calls of
+ inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+ Bytef *dictionary,
+ uInt *dictLength));
+/*
+ Returns the sliding dictionary being maintained by inflate. dictLength is
+ set to the number of bytes in the dictionary, and that many bytes are copied
+ to dictionary. dictionary must have enough space, where 32768 bytes is
+ always enough. If inflateGetDictionary() is called with dictionary equal to
+ Z_NULL, then only the dictionary length is returned, and nothing is copied.
+ Similary, if dictLength is Z_NULL, then it is not set.
+
+ inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+ stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+ Skips invalid compressed data until a possible full flush point (see above
+ for the description of deflate with Z_FULL_FLUSH) can be found, or until all
+ available input is skipped. No output is provided.
+
+ inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+ All full flush points have this pattern, but not all occurrences of this
+ pattern are full flush points.
+
+ inflateSync returns Z_OK if a possible full flush point has been found,
+ Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+ has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+ In the success case, the application may save the current current value of
+ total_in which indicates where valid compressed data was found. In the
+ error case, the application may repeatedly call inflateSync, providing more
+ input each time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when randomly accessing a large stream. The
+ first pass through the stream can periodically record the inflate state,
+ allowing restarting inflate at those points when randomly accessing the
+ stream.
+
+ inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate all the internal decompression state. The
+ stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+ int windowBits));
+/*
+ This function is the same as inflateReset, but it also permits changing
+ the wrap and window size requests. The windowBits parameter is interpreted
+ the same as it is for inflateInit2.
+
+ inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+ the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ This function inserts bits in the inflate input stream. The intent is
+ that this function is used to start inflating at a bit position in the
+ middle of a byte. The provided bits will be used before any bytes are used
+ from next_in. This function should only be used with raw inflate, and
+ should be used before the first inflate() call after inflateInit2() or
+ inflateReset(). bits must be less than or equal to 16, and that many of the
+ least significant bits of value will be inserted in the input.
+
+ If bits is negative, then the input stream bit buffer is emptied. Then
+ inflatePrime() can be called again to put bits in the buffer. This is used
+ to clear out bits leftover after feeding inflate a block description prior
+ to feeding inflate codes.
+
+ inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+ This function returns two values, one in the lower 16 bits of the return
+ value, and the other in the remaining upper bits, obtained by shifting the
+ return value down 16 bits. If the upper value is -1 and the lower value is
+ zero, then inflate() is currently decoding information outside of a block.
+ If the upper value is -1 and the lower value is non-zero, then inflate is in
+ the middle of a stored block, with the lower value equaling the number of
+ bytes from the input remaining to copy. If the upper value is not -1, then
+ it is the number of bits back from the current bit position in the input of
+ the code (literal or length/distance pair) currently being processed. In
+ that case the lower value is the number of bytes already emitted for that
+ code.
+
+ A code is being processed if inflate is waiting for more input to complete
+ decoding of the code, or if it has completed decoding but is waiting for
+ more output space to write the literal or match data.
+
+ inflateMark() is used to mark locations in the input data for random
+ access, which may be at bit positions, and to note those cases where the
+ output of a code may span boundaries of random access blocks. The current
+ location in the input stream can be determined from avail_in and data_type
+ as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+ inflateMark returns the value noted above or -1 << 16 if the provided
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ inflateGetHeader() requests that gzip header information be stored in the
+ provided gz_header structure. inflateGetHeader() may be called after
+ inflateInit2() or inflateReset(), and before the first call of inflate().
+ As inflate() processes the gzip stream, head->done is zero until the header
+ is completed, at which time head->done is set to one. If a zlib stream is
+ being decoded, then head->done is set to -1 to indicate that there will be
+ no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be
+ used to force inflate() to return immediately after header processing is
+ complete and before any actual data is decompressed.
+
+ The text, time, xflags, and os fields are filled in with the gzip header
+ contents. hcrc is set to true if there is a header CRC. (The header CRC
+ was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+ contains the maximum number of bytes to write to extra. Once done is true,
+ extra_len contains the actual extra field length, and extra contains the
+ extra field, or that field truncated if extra_max is less than extra_len.
+ If name is not Z_NULL, then up to name_max characters are written there,
+ terminated with a zero unless the length is greater than name_max. If
+ comment is not Z_NULL, then up to comm_max characters are written there,
+ terminated with a zero unless the length is greater than comm_max. When any
+ of extra, name, or comment are not Z_NULL and the respective field is not
+ present in the header, then that field is set to Z_NULL to signal its
+ absence. This allows the use of deflateSetHeader() with the returned
+ structure to duplicate the header. However if those fields are set to
+ allocated memory, then the application will need to save those pointers
+ elsewhere so that they can be eventually freed.
+
+ If inflateGetHeader is not used, then the header information is simply
+ discarded. The header is always checked for validity, including the header
+ CRC if present. inflateReset() will reset the process to discard the header
+ information. The application would need to call inflateGetHeader() again to
+ retrieve the header from the next gzip stream.
+
+ inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window));
+
+ Initialize the internal stream state for decompression using inflateBack()
+ calls. The fields zalloc, zfree and opaque in strm must be initialized
+ before the call. If zalloc and zfree are Z_NULL, then the default library-
+ derived memory allocation routines are used. windowBits is the base two
+ logarithm of the window size, in the range 8..15. window is a caller
+ supplied buffer of that size. Except for special applications where it is
+ assured that deflate was used with small window sizes, windowBits must be 15
+ and a 32K byte window must be supplied to be able to decompress general
+ deflate streams.
+
+ See inflateBack() for the usage of these routines.
+
+ inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+ the parameters are invalid, Z_MEM_ERROR if the internal state could not be
+ allocated, or Z_VERSION_ERROR if the version of the library does not match
+ the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *,
+ z_const unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+ in_func in, void FAR *in_desc,
+ out_func out, void FAR *out_desc));
+/*
+ inflateBack() does a raw inflate with a single call using a call-back
+ interface for input and output. This is potentially more efficient than
+ inflate() for file i/o applications, in that it avoids copying between the
+ output and the sliding window by simply making the window itself the output
+ buffer. inflate() can be faster on modern CPUs when used with large
+ buffers. inflateBack() trusts the application to not change the output
+ buffer passed by the output function, at least until inflateBack() returns.
+
+ inflateBackInit() must be called first to allocate the internal state
+ and to initialize the state with the user-provided window buffer.
+ inflateBack() may then be used multiple times to inflate a complete, raw
+ deflate stream with each call. inflateBackEnd() is then called to free the
+ allocated state.
+
+ A raw deflate stream is one with no zlib or gzip header or trailer.
+ This routine would normally be used in a utility that reads zip or gzip
+ files and writes out uncompressed files. The utility would decode the
+ header and process the trailer on its own, hence this routine expects only
+ the raw deflate stream to decompress. This is different from the normal
+ behavior of inflate(), which expects either a zlib or gzip header and
+ trailer around the deflate stream.
+
+ inflateBack() uses two subroutines supplied by the caller that are then
+ called by inflateBack() for input and output. inflateBack() calls those
+ routines until it reads a complete deflate stream and writes out all of the
+ uncompressed data, or until it encounters an error. The function's
+ parameters and return types are defined above in the in_func and out_func
+ typedefs. inflateBack() will call in(in_desc, &buf) which should return the
+ number of bytes of provided input, and a pointer to that input in buf. If
+ there is no input available, in() must return zero--buf is ignored in that
+ case--and inflateBack() will return a buffer error. inflateBack() will call
+ out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out()
+ should return zero on success, or non-zero on failure. If out() returns
+ non-zero, inflateBack() will return with an error. Neither in() nor out()
+ are permitted to change the contents of the window provided to
+ inflateBackInit(), which is also the buffer that out() uses to write from.
+ The length written by out() will be at most the window size. Any non-zero
+ amount of input may be provided by in().
+
+ For convenience, inflateBack() can be provided input on the first call by
+ setting strm->next_in and strm->avail_in. If that input is exhausted, then
+ in() will be called. Therefore strm->next_in must be initialized before
+ calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
+ immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
+ must also be initialized, and then if strm->avail_in is not zero, input will
+ initially be taken from strm->next_in[0 .. strm->avail_in - 1].
+
+ The in_desc and out_desc parameters of inflateBack() is passed as the
+ first parameter of in() and out() respectively when they are called. These
+ descriptors can be optionally used to pass any information that the caller-
+ supplied in() and out() functions need to do their job.
+
+ On return, inflateBack() will set strm->next_in and strm->avail_in to
+ pass back any unused input that was provided by the last in() call. The
+ return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+ if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+ in the deflate stream (in which case strm->msg is set to indicate the nature
+ of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+ In the case of Z_BUF_ERROR, an input or output error can be distinguished
+ using strm->next_in which will be Z_NULL only if in() returned an error. If
+ strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+ non-zero. (in() will always be called before out(), so strm->next_in is
+ assured to be defined if out() returns non-zero.) Note that inflateBack()
+ cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+ All memory allocated by inflateBackInit() is freed.
+
+ inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+ state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+ Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+ 1.0: size of uInt
+ 3.2: size of uLong
+ 5.4: size of voidpf (pointer)
+ 7.6: size of z_off_t
+
+ Compiler, assembler, and debug options:
+ 8: DEBUG
+ 9: ASMV or ASMINF -- use ASM code
+ 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+ 11: 0 (reserved)
+
+ One-time table building (smaller code, but not thread-safe if true):
+ 12: BUILDFIXED -- build static block decoding tables when needed
+ 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+ 14,15: 0 (reserved)
+
+ Library content (indicates missing functionality):
+ 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+ deflate code when not needed)
+ 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+ and decode gzip streams (to avoid linking crc code)
+ 18-19: 0 (reserved)
+
+ Operation variations (changes in library functionality):
+ 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+ 21: FASTEST -- deflate algorithm with only one, lowest compression level
+ 22,23: 0 (reserved)
+
+ The sprintf variant used by gzprintf (zero is best):
+ 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+ 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+ 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+ Remainder:
+ 27-31: 0 (reserved)
+ */
+
+#ifndef Z_SOLO
+
+ /* utility functions */
+
+/*
+ The following utility functions are implemented on top of the basic
+ stream-oriented functions. To simplify the interface, some default options
+ are assumed (compression level and memory usage, standard memory allocation
+ functions). The source code of these utility functions can be modified if
+ you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed buffer.
+
+ compress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen,
+ int level));
+/*
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in deflateInit. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressed buffer.
+
+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+ Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+ compressBound() returns an upper bound on the compressed size after
+ compress() or compress2() on sourceLen bytes. It would be used before a
+ compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be large enough to hold the entire
+ uncompressed data. (The size of the uncompressed data must have been saved
+ previously by the compressor and transmitted to the decompressor by some
+ mechanism outside the scope of this compression library.) Upon exit, destLen
+ is the actual size of the uncompressed buffer.
+
+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In
+ the case where there is not enough room, uncompress() will fill the output
+ buffer with the uncompressed data up to that point.
+*/
+
+ /* gzip file access functions */
+
+/*
+ This library supports reading and writing files in gzip (.gz) format with
+ an interface similar to that of stdio, using the functions that start with
+ "gz". The gzip format is different from the zlib format. gzip is a gzip
+ wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+ Opens a gzip (.gz) file for reading or writing. The mode parameter is as
+ in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+ a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+ compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+ for fixed code compression as in "wb9F". (See the description of
+ deflateInit2 for more information about the strategy parameter.) 'T' will
+ request transparent writing or appending with no compression and not using
+ the gzip format.
+
+ "a" can be used instead of "w" to request that the gzip stream that will
+ be written be appended to the file. "+" will result in an error, since
+ reading and writing to the same gzip file is not supported. The addition of
+ "x" when writing will create the file exclusively, which fails if the file
+ already exists. On systems that support it, the addition of "e" when
+ reading or writing will set the flag to close the file on an execve() call.
+
+ These functions, as well as gzip, will read and decode a sequence of gzip
+ streams in a file. The append function of gzopen() can be used to create
+ such a file. (Also see gzflush() for another way to do this.) When
+ appending, gzopen does not test whether the file begins with a gzip stream,
+ nor does it look for the end of the gzip streams to begin appending. gzopen
+ will simply append a gzip stream to the existing file.
+
+ gzopen can be used to read a file which is not in gzip format; in this
+ case gzread will directly read from the file without decompression. When
+ reading, this will be detected automatically by looking for the magic two-
+ byte gzip header.
+
+ gzopen returns NULL if the file could not be opened, if there was
+ insufficient memory to allocate the gzFile state, or if an invalid mode was
+ specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+ errno can be checked to determine if the reason gzopen failed was that the
+ file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+ gzdopen associates a gzFile with the file descriptor fd. File descriptors
+ are obtained from calls like open, dup, creat, pipe or fileno (if the file
+ has been previously opened with fopen). The mode parameter is as in gzopen.
+
+ The next call of gzclose on the returned gzFile will also close the file
+ descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+ fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+ mode);. The duplicated descriptor should be saved to avoid a leak, since
+ gzdopen does not close fd if it fails. If you are using fileno() to get the
+ file descriptor from a FILE *, then you will have to use dup() to avoid
+ double-close()ing the file descriptor. Both gzclose() and fclose() will
+ close the associated file descriptor, so they need to have different file
+ descriptors.
+
+ gzdopen returns NULL if there was insufficient memory to allocate the
+ gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+ provided, or '+' was provided), or if fd is -1. The file descriptor is not
+ used until the next gz* read, write, seek, or close operation, so gzdopen
+ will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+ Set the internal buffer size used by this library's functions. The
+ default buffer size is 8192 bytes. This function must be called after
+ gzopen() or gzdopen(), and before any other calls that read or write the
+ file. The buffer memory allocation is always deferred to the first read or
+ write. Two buffers are allocated, either both of the specified size when
+ writing, or one of the specified size and the other twice that size when
+ reading. A larger buffer size of, for example, 64K or 128K bytes will
+ noticeably increase the speed of decompression (reading).
+
+ The new buffer size also affects the maximum length for gzprintf().
+
+ gzbuffer() returns 0 on success, or -1 on failure, such as being called
+ too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+ Dynamically update the compression level or strategy. See the description
+ of deflateInit2 for the meaning of these parameters.
+
+ gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+ opened for writing.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+ Reads the given number of uncompressed bytes from the compressed file. If
+ the input file is not in gzip format, gzread copies the given number of
+ bytes into the buffer directly from the file.
+
+ After reaching the end of a gzip stream in the input, gzread will continue
+ to read, looking for another gzip stream. Any number of gzip streams may be
+ concatenated in the input file, and will all be decompressed by gzread().
+ If something other than a gzip stream is encountered after a gzip stream,
+ that remaining trailing garbage is ignored (and no error is returned).
+
+ gzread can be used to read a gzip file that is being concurrently written.
+ Upon reaching the end of the input, gzread will return with the available
+ data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+ gzclearerr can be used to clear the end of file indicator in order to permit
+ gzread to be tried again. Z_OK indicates that a gzip stream was completed
+ on the last gzread. Z_BUF_ERROR indicates that the input file ended in the
+ middle of a gzip stream. Note that gzread does not return -1 in the event
+ of an incomplete gzip stream. This error is deferred until gzclose(), which
+ will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+ stream. Alternatively, gzerror can be used before gzclose to detect this
+ case.
+
+ gzread returns the number of uncompressed bytes actually read, less than
+ len for end of file, or -1 for error.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+ voidpc buf, unsigned len));
+/*
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of uncompressed bytes written or 0 in case of
+ error.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
+/*
+ Converts, formats, and writes the arguments to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written, or 0 in case of error. The number of
+ uncompressed bytes written is limited to 8191, or one less than the buffer
+ size given to gzbuffer(). The caller should assure that this limit is not
+ exceeded. If it is exceeded, then gzprintf() will return an error (0) with
+ nothing written. In this case, there may also be a buffer overflow with
+ unpredictable consequences, which is possible only if zlib was compiled with
+ the insecure functions sprintf() or vsprintf() because the secure snprintf()
+ or vsnprintf() functions were not available. This can be determined using
+ zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+ Reads bytes from the compressed file until len-1 characters are read, or a
+ newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. If any characters are read or if len == 1, the
+ string is terminated with a null character. If no characters are read due
+ to an end-of-file or len < 1, then the buffer is left untouched.
+
+ gzgets returns buf which is a null-terminated string, or it returns NULL
+ for end-of-file or in case of error. If there was an error, the contents at
+ buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+ Writes c, converted to an unsigned char, into the compressed file. gzputc
+ returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+ Reads one byte from the compressed file. gzgetc returns this byte or -1
+ in case of end of file or error. This is implemented as a macro for speed.
+ As such, it does not do all of the checking the other functions do. I.e.
+ it does not check to see if file is NULL, nor whether the structure file
+ points to has been clobbered or not.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+ Push one character back onto the stream to be read as the first character
+ on the next read. At least one character of push-back is allowed.
+ gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
+ fail if c is -1, and may fail if a character has been pushed but not read
+ yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
+ output buffer size of pushed characters is allowed. (See gzbuffer above.)
+ The pushed character will be discarded if the stream is repositioned with
+ gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+ Flushes all pending output into the compressed file. The parameter flush
+ is as in the deflate() function. The return value is the zlib error number
+ (see function gzerror below). gzflush is only permitted when writing.
+
+ If the flush parameter is Z_FINISH, the remaining data is written and the
+ gzip stream is completed in the output. If gzwrite() is called again, a new
+ gzip stream will be started in the output. gzread() is able to read such
+ concatented gzip streams.
+
+ gzflush should be called only when strictly necessary because it will
+ degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+ z_off_t offset, int whence));
+
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
+ the value SEEK_END is not supported.
+
+ If the file is opened for reading, this function is emulated but can be
+ extremely slow. If the file is opened for writing, only forward seeks are
+ supported; gzseek then compresses a sequence of zeroes up to the new
+ starting position.
+
+ gzseek returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error, in
+ particular if the file is opened for writing and the new starting position
+ would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
+/*
+ Rewinds the given file. This function is supported only for reading.
+
+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
+
+ Returns the starting position for the next gzread or gzwrite on the given
+ compressed file. This position represents a number of bytes in the
+ uncompressed data stream, and is zero when starting, even if appending or
+ reading a gzip stream from the middle of a file using gzdopen().
+
+ gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+ Returns the current offset in the file being read or written. This offset
+ includes the count of bytes that precede the gzip stream, for example when
+ appending or when using gzdopen() for reading. When reading, the offset
+ does not include as yet unused buffered input. This information can be used
+ for a progress indicator. On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+ Returns true (1) if the end-of-file indicator has been set while reading,
+ false (0) otherwise. Note that the end-of-file indicator is set only if the
+ read tried to go past the end of the input, but came up short. Therefore,
+ just like feof(), gzeof() may return false even if there is no more data to
+ read, in the event that the last read request was for the exact number of
+ bytes remaining in the input file. This will happen if the input file size
+ is an exact multiple of the buffer size.
+
+ If gzeof() returns true, then the read functions will return no more data,
+ unless the end-of-file indicator is reset by gzclearerr() and the input file
+ has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+ Returns true (1) if file is being copied directly while reading, or false
+ (0) if file is a gzip stream being decompressed.
+
+ If the input file is empty, gzdirect() will return true, since the input
+ does not contain a gzip stream.
+
+ If gzdirect() is used immediately after gzopen() or gzdopen() it will
+ cause buffers to be allocated to allow reading the file to determine if it
+ is a gzip file. Therefore if gzbuffer() is used, it should be called before
+ gzdirect().
+
+ When writing, gzdirect() returns true (1) if transparent writing was
+ requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note:
+ gzdirect() is not needed when writing. Transparent writing must be
+ explicitly requested, so the application already knows the answer. When
+ linking statically, using gzdirect() will include all of the zlib code for
+ gzip file reading and decompression, which may not be desired.)
+*/
+
+ZEXTERN int ZEXPORT gzclose OF((gzFile file));
+/*
+ Flushes all pending output if necessary, closes the compressed file and
+ deallocates the (de)compression state. Note that once file is closed, you
+ cannot call gzerror with file, since its structures have been deallocated.
+ gzclose must not be called more than once on the same file, just as free
+ must not be called more than once on the same allocation.
+
+ gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+ file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+ last read ended in the middle of a gzip stream, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+ Same as gzclose(), but gzclose_r() is only for use when reading, and
+ gzclose_w() is only for use when writing or appending. The advantage to
+ using these instead of gzclose() is that they avoid linking in zlib
+ compression or decompression code that is not used when only reading or only
+ writing respectively. If gzclose() is used, then both compression and
+ decompression code will be included the application when linking to a static
+ zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+ Returns the error message for the last error which occurred on the given
+ compressed file. errnum is set to zlib error number. If an error occurred
+ in the file system and not in the compression library, errnum is set to
+ Z_ERRNO and the application may consult errno to get the exact error code.
+
+ The application must not modify the returned string. Future calls to
+ this function may invalidate the previously returned string. If file is
+ closed, then the string previously returned by gzerror will no longer be
+ available.
+
+ gzerror() should be used to distinguish errors from end-of-file for those
+ functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+ Clears the error and end-of-file flags for file. This is analogous to the
+ clearerr() function in stdio. This is useful for continuing to read a gzip
+ file that is being written concurrently.
+*/
+
+#endif /* !Z_SOLO */
+
+ /* checksum functions */
+
+/*
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the compression
+ library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is Z_NULL, this function returns the
+ required initial value for the checksum.
+
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster.
+
+ Usage example:
+
+ uLong adler = adler32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+ z_off_t len2));
+
+ Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
+ and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+ each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
+ seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note
+ that the z_off_t type (like off_t) is a signed integer. If len2 is
+ negative, the result has no meaning or utility.
+*/
+
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+/*
+ Update a running CRC-32 with the bytes buf[0..len-1] and return the
+ updated CRC-32. If buf is Z_NULL, this function returns the required
+ initial value for the crc. Pre- and post-conditioning (one's complement) is
+ performed within this function so it shouldn't be done by the application.
+
+ Usage example:
+
+ uLong crc = crc32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = crc32(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+ Combine two CRC-32 check values into one. For two sequences of bytes,
+ seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+ calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
+ check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+ len2.
+*/
+
+
+ /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
+ int windowBits, int memLevel,
+ int strategy, const char *version,
+ int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+ unsigned char FAR *window,
+ const char *version,
+ int stream_size));
+#define deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#define inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+ (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+ (int)sizeof(z_stream))
+#define inflateBackInit(strm, windowBits, window) \
+ inflateBackInit_((strm), (windowBits), (window), \
+ ZLIB_VERSION, (int)sizeof(z_stream))
+
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure. Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro. The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously. They can
+ * only be used by the gzgetc() macro. You have been warned.
+ */
+struct gzFile_s {
+ unsigned have;
+ unsigned char *next;
+ z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
+#ifdef Z_PREFIX_SET
+# undef z_gzgetc
+# define z_gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#else
+# define gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#endif
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#ifdef Z_LARGE64
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+ ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
+# ifdef Z_PREFIX_SET
+# define z_gzopen z_gzopen64
+# define z_gzseek z_gzseek64
+# define z_gztell z_gztell64
+# define z_gzoffset z_gzoffset64
+# define z_adler32_combine z_adler32_combine64
+# define z_crc32_combine z_crc32_combine64
+# else
+# define gzopen gzopen64
+# define gzseek gzseek64
+# define gztell gztell64
+# define gzoffset gzoffset64
+# define adler32_combine adler32_combine64
+# define crc32_combine crc32_combine64
+# endif
+# ifndef Z_LARGE64
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+# endif
+#else
+ ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+#else /* Z_SOLO */
+
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+
+#endif /* !Z_SOLO */
+
+/* hack for buggy compilers */
+#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
+ struct internal_state {int dummy;};
+#endif
+
+/* undocumented functions */
+ZEXTERN const char * ZEXPORT zError OF((int));
+ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void));
+ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp));
+#if defined(_WIN32) && !defined(Z_SOLO)
+ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path,
+ const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+ const char *format,
+ va_list va));
+# endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
--- /dev/null
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+#ifndef Z_SOLO
+# include "gzguts.h"
+#endif
+
+#ifndef NO_DUMMY_DECL
+struct internal_state {int dummy;}; /* for buggy compilers */
+#endif
+
+z_const char * const z_errmsg[10] = {
+"need dictionary", /* Z_NEED_DICT 2 */
+"stream end", /* Z_STREAM_END 1 */
+"", /* Z_OK 0 */
+"file error", /* Z_ERRNO (-1) */
+"stream error", /* Z_STREAM_ERROR (-2) */
+"data error", /* Z_DATA_ERROR (-3) */
+"insufficient memory", /* Z_MEM_ERROR (-4) */
+"buffer error", /* Z_BUF_ERROR (-5) */
+"incompatible version",/* Z_VERSION_ERROR (-6) */
+""};
+
+
+const char * ZEXPORT zlibVersion()
+{
+ return ZLIB_VERSION;
+}
+
+uLong ZEXPORT zlibCompileFlags()
+{
+ uLong flags;
+
+ flags = 0;
+ switch ((int)(sizeof(uInt))) {
+ case 2: break;
+ case 4: flags += 1; break;
+ case 8: flags += 2; break;
+ default: flags += 3;
+ }
+ switch ((int)(sizeof(uLong))) {
+ case 2: break;
+ case 4: flags += 1 << 2; break;
+ case 8: flags += 2 << 2; break;
+ default: flags += 3 << 2;
+ }
+ switch ((int)(sizeof(voidpf))) {
+ case 2: break;
+ case 4: flags += 1 << 4; break;
+ case 8: flags += 2 << 4; break;
+ default: flags += 3 << 4;
+ }
+ switch ((int)(sizeof(z_off_t))) {
+ case 2: break;
+ case 4: flags += 1 << 6; break;
+ case 8: flags += 2 << 6; break;
+ default: flags += 3 << 6;
+ }
+#ifdef DEBUG
+ flags += 1 << 8;
+#endif
+#if defined(ASMV) || defined(ASMINF)
+ flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+ flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+ flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+ flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+ flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+ flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+ flags += 1L << 20;
+#endif
+#ifdef FASTEST
+ flags += 1L << 21;
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifdef NO_vsnprintf
+ flags += 1L << 25;
+# ifdef HAS_vsprintf_void
+ flags += 1L << 26;
+# endif
+# else
+# ifdef HAS_vsnprintf_void
+ flags += 1L << 26;
+# endif
+# endif
+#else
+ flags += 1L << 24;
+# ifdef NO_snprintf
+ flags += 1L << 25;
+# ifdef HAS_sprintf_void
+ flags += 1L << 26;
+# endif
+# else
+# ifdef HAS_snprintf_void
+ flags += 1L << 26;
+# endif
+# endif
+#endif
+ return flags;
+}
+
+#ifdef DEBUG
+
+# ifndef verbose
+# define verbose 0
+# endif
+int ZLIB_INTERNAL z_verbose = verbose;
+
+void ZLIB_INTERNAL z_error (m)
+ char *m;
+{
+ fprintf(stderr, "%s\n", m);
+ exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+ int err;
+{
+ return ERR_MSG(err);
+}
+
+#if defined(_WIN32_WCE)
+ /* The Microsoft C Run-Time Library for Windows CE doesn't have
+ * errno. We define it as a global variable to simplify porting.
+ * Its value is always 0 and should not be used.
+ */
+ int errno = 0;
+#endif
+
+#ifndef HAVE_MEMCPY
+
+void ZLIB_INTERNAL zmemcpy(dest, source, len)
+ Bytef* dest;
+ const Bytef* source;
+ uInt len;
+{
+ if (len == 0) return;
+ do {
+ *dest++ = *source++; /* ??? to be unrolled */
+ } while (--len != 0);
+}
+
+int ZLIB_INTERNAL zmemcmp(s1, s2, len)
+ const Bytef* s1;
+ const Bytef* s2;
+ uInt len;
+{
+ uInt j;
+
+ for (j = 0; j < len; j++) {
+ if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
+ }
+ return 0;
+}
+
+void ZLIB_INTERNAL zmemzero(dest, len)
+ Bytef* dest;
+ uInt len;
+{
+ if (len == 0) return;
+ do {
+ *dest++ = 0; /* ??? to be unrolled */
+ } while (--len != 0);
+}
+#endif
+
+#ifndef Z_SOLO
+
+#ifdef SYS16BIT
+
+#ifdef __TURBOC__
+/* Turbo C in 16-bit mode */
+
+# define MY_ZCALLOC
+
+/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
+ * and farmalloc(64K) returns a pointer with an offset of 8, so we
+ * must fix the pointer. Warning: the pointer must be put back to its
+ * original form in order to free it, use zcfree().
+ */
+
+#define MAX_PTR 10
+/* 10*64K = 640K */
+
+local int next_ptr = 0;
+
+typedef struct ptr_table_s {
+ voidpf org_ptr;
+ voidpf new_ptr;
+} ptr_table;
+
+local ptr_table table[MAX_PTR];
+/* This table is used to remember the original form of pointers
+ * to large buffers (64K). Such pointers are normalized with a zero offset.
+ * Since MSDOS is not a preemptive multitasking OS, this table is not
+ * protected from concurrent access. This hack doesn't work anyway on
+ * a protected system like OS/2. Use Microsoft C instead.
+ */
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+ voidpf buf = opaque; /* just to make some compilers happy */
+ ulg bsize = (ulg)items*size;
+
+ /* If we allocate less than 65520 bytes, we assume that farmalloc
+ * will return a usable pointer which doesn't have to be normalized.
+ */
+ if (bsize < 65520L) {
+ buf = farmalloc(bsize);
+ if (*(ush*)&buf != 0) return buf;
+ } else {
+ buf = farmalloc(bsize + 16L);
+ }
+ if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
+ table[next_ptr].org_ptr = buf;
+
+ /* Normalize the pointer to seg:0 */
+ *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
+ *(ush*)&buf = 0;
+ table[next_ptr++].new_ptr = buf;
+ return buf;
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+ int n;
+ if (*(ush*)&ptr != 0) { /* object < 64K */
+ farfree(ptr);
+ return;
+ }
+ /* Find the original pointer */
+ for (n = 0; n < next_ptr; n++) {
+ if (ptr != table[n].new_ptr) continue;
+
+ farfree(table[n].org_ptr);
+ while (++n < next_ptr) {
+ table[n-1] = table[n];
+ }
+ next_ptr--;
+ return;
+ }
+ ptr = opaque; /* just to make some compilers happy */
+ Assert(0, "zcfree: ptr not found");
+}
+
+#endif /* __TURBOC__ */
+
+
+#ifdef M_I86
+/* Microsoft C in 16-bit mode */
+
+# define MY_ZCALLOC
+
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
+# define _halloc halloc
+# define _hfree hfree
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
+{
+ if (opaque) opaque = 0; /* to make compiler happy */
+ return _halloc((long)items, size);
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+ if (opaque) opaque = 0; /* to make compiler happy */
+ _hfree(ptr);
+}
+
+#endif /* M_I86 */
+
+#endif /* SYS16BIT */
+
+
+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef STDC
+extern voidp malloc OF((uInt size));
+extern voidp calloc OF((uInt items, uInt size));
+extern void free OF((voidpf ptr));
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
+ voidpf opaque;
+ unsigned items;
+ unsigned size;
+{
+ if (opaque) items += size - size; /* make compiler happy */
+ return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+ (voidpf)calloc(items, size);
+}
+
+void ZLIB_INTERNAL zcfree (opaque, ptr)
+ voidpf opaque;
+ voidpf ptr;
+{
+ free(ptr);
+ if (opaque) return; /* make compiler happy */
+}
+
+#endif /* MY_ZCALLOC */
+
+#endif /* !Z_SOLO */
--- /dev/null
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2013 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZUTIL_H
+#define ZUTIL_H
+
+#ifdef HAVE_HIDDEN
+# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+# define ZLIB_INTERNAL
+#endif
+
+#include "zlib.h"
+
+#if defined(STDC) && !defined(Z_SOLO)
+# if !(defined(_WIN32_WCE) && defined(_MSC_VER))
+# include <stddef.h>
+# endif
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#ifdef Z_SOLO
+ typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */
+#endif
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+typedef unsigned char uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long ulg;
+
+extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+ return (strm->msg = ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+ /* common constants */
+
+#ifndef DEF_WBITS
+# define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES 2
+/* The three kinds of block type */
+
+#define MIN_MATCH 3
+#define MAX_MATCH 258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+ /* target dependencies */
+
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
+# define OS_CODE 0x00
+# ifndef Z_SOLO
+# if defined(__TURBOC__) || defined(__BORLANDC__)
+# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+ /* Allow compilation with ANSI keywords only enabled */
+ void _Cdecl farfree( void *block );
+ void *_Cdecl farmalloc( unsigned long nbytes );
+# else
+# include <alloc.h>
+# endif
+# else /* MSC or DJGPP */
+# include <malloc.h>
+# endif
+# endif
+#endif
+
+#ifdef AMIGA
+# define OS_CODE 0x01
+#endif
+
+#if defined(VAXC) || defined(VMS)
+# define OS_CODE 0x02
+# define F_OPEN(name, mode) \
+ fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#if defined(ATARI) || defined(atarist)
+# define OS_CODE 0x05
+#endif
+
+#ifdef OS2
+# define OS_CODE 0x06
+# if defined(M_I86) && !defined(Z_SOLO)
+# include <malloc.h>
+# endif
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+# define OS_CODE 0x07
+# ifndef Z_SOLO
+# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fdopen */
+# else
+# ifndef fdopen
+# define fdopen(fd,mode) NULL /* No fdopen() */
+# endif
+# endif
+# endif
+#endif
+
+#ifdef TOPS20
+# define OS_CODE 0x0a
+#endif
+
+#ifdef WIN32
+# ifndef __CYGWIN__ /* Cygwin is Unix, not Win32 */
+# define OS_CODE 0x0b
+# endif
+#endif
+
+#ifdef __50SERIES /* Prime/PRIMOS */
+# define OS_CODE 0x0f
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+# define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
+# if defined(_WIN32_WCE)
+# define fdopen(fd,mode) NULL /* No fdopen() */
+# ifndef _PTRDIFF_T_DEFINED
+ typedef int ptrdiff_t;
+# define _PTRDIFF_T_DEFINED
+# endif
+# else
+# define fdopen(fd,type) _fdopen(fd,type)
+# endif
+#endif
+
+#if defined(__BORLANDC__) && !defined(MSDOS)
+ #pragma warn -8004
+ #pragma warn -8008
+ #pragma warn -8066
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_WIN32) && \
+ (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#endif
+
+ /* common defaults */
+
+#ifndef OS_CODE
+# define OS_CODE 0x03 /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+# define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+ /* functions */
+
+#if defined(pyr) || defined(Z_SOLO)
+# define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+ * You may have to use the same strategy for Borland C (untested).
+ * The __SC__ check is for Symantec.
+ */
+# define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+# define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+# define zmemcpy _fmemcpy
+# define zmemcmp _fmemcmp
+# define zmemzero(dest, len) _fmemset(dest, 0, len)
+# else
+# define zmemcpy memcpy
+# define zmemcmp memcmp
+# define zmemzero(dest, len) memset(dest, 0, len)
+# endif
+#else
+ void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+ int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+ void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# include <stdio.h>
+ extern int ZLIB_INTERNAL z_verbose;
+ extern void ZLIB_INTERNAL z_error OF((char *m));
+# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+# define Trace(x) {if (z_verbose>=0) fprintf x ;}
+# define Tracev(x) {if (z_verbose>0) fprintf x ;}
+# define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+#ifndef Z_SOLO
+ voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
+ unsigned size));
+ void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
+#endif
+
+#define ZALLOC(strm, items, size) \
+ (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+ (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+#endif /* ZUTIL_H */
projects / proxmark3-svn / commitdiff