for (i=0; i<size; i++){
askSimBit(BitStream[i]^invert, &n, clk, encoding);
}
- if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for biphase phase)
+ if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for ask/raw || biphase phase)
for (i=0; i<size; i++){
askSimBit(BitStream[i]^invert^1, &n, clk, encoding);
}
//Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
data[0] = T55x7_BITRATE_RF_32 | T55x7_MODULATION_PSK1 | (7 << T55x7_MAXBLOCK_SHIFT);
//TODO add selection of chip for Q5 or T55x7
- // data[0] = (((32-2)/2)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 7 << T5555_MAXBLOCK_SHIFT;
+ // data[0] = (((32-2)>>1)<<T5555_BITRATE_SHIFT) | T5555_MODULATION_PSK1 | 7 << T5555_MAXBLOCK_SHIFT;
WriteT55xx(data, 0, 8);
//Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
// T5567WriteBlock(0x603E10E2,0);
// clone viking tag to T55xx
void CopyVikingtoT55xx(uint32_t block1, uint32_t block2, uint8_t Q5) {
uint32_t data[] = {T55x7_BITRATE_RF_32 | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT), block1, block2};
- if (Q5) data[0] = (32 << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | 2 << T5555_MAXBLOCK_SHIFT;
+ if (Q5) data[0] = ( ((32-2)>>1) << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | 2 << T5555_MAXBLOCK_SHIFT;
// Program the data blocks for supplied ID and the block 0 config
WriteT55xx(data, 0, 3);
LED_D_OFF();
fwd_write_ptr = forwardLink_data;
fwd_bit_sz = fwd_bit_count;
- LED_D_ON();
-
// Set up FPGA, 125kHz
LFSetupFPGAForADC(95, true);
fwd_bit_sz--; //prepare next bit modulation
fwd_write_ptr++;
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
- SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
+ SpinDelayUs(56*8); //55 cycles off (8us each)for 4305
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
SpinDelayUs(16*8); //16 cycles on (8us each)
else {
//These timings work for 4469/4269/4305 (with the 55*8 above)
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
- SpinDelayUs(23*8); //16-4 cycles off (8us each)
+ SpinDelayUs(20*8); //16-4 cycles off (8us each) //23
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
- SpinDelayUs(9*8); //16 cycles on (8us each)
+ SpinDelayUs(12*8); //16 cycles on (8us each) //9
}
}
}
void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
uint8_t fwd_bit_count;
- uint8_t *dest = BigBuf_get_addr();
- uint16_t bufferlength = BigBuf_max_traceLen();
- uint32_t i = 0;
// Clear destination buffer before sending the command
BigBuf_Clear_ext(false);
+ LED_A_ON();
//If password mode do login
if (PwdMode == 1) EM4xLogin(Pwd);
fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
fwd_bit_count += Prepare_Addr( Address );
- // Connect the A/D to the peak-detected low-frequency path.
- SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
- // Now set up the SSC to get the ADC samples that are now streaming at us.
- FpgaSetupSsc();
-
SendForward(fwd_bit_count);
// Now do the acquisition
- i = 0;
- for(;;) {
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
- AT91C_BASE_SSC->SSC_THR = 0x43;
- }
- if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
- dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
- i++;
- if (i >= bufferlength) break;
- }
- }
+ DoAcquisition_config(TRUE);
+
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ LED_A_OFF();
cmd_send(CMD_ACK,0,0,0,0,0);
- LED_D_OFF();
}
-void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
-
+void EM4xWriteWord(uint32_t flag, uint32_t Data, uint32_t Pwd) {
+
+ bool PwdMode = (flag & 0xF);
+ uint8_t Address = (flag >> 8) & 0xFF;
uint8_t fwd_bit_count;
+ //clear buffer now so it does not interfere with timing later
+ BigBuf_Clear_ext(false);
+
+ LED_A_ON();
//If password mode do login
- if (PwdMode == 1) EM4xLogin(Pwd);
+ if (PwdMode) EM4xLogin(Pwd);
forward_ptr = forwardLink_data;
fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
//Wait for write to complete
SpinDelay(20);
+
+ //Capture response if one exists
+ DoAcquisition_config(TRUE);
+
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
- LED_D_OFF();
+ LED_A_OFF();
+ cmd_send(CMD_ACK,0,0,0,0,0);
}
/*
Reading a COTAG.
#include "cmdparser.h"
#include "cmddata.h"
#include "cmdlf.h"
+#include "cmdmain.h"
#include "cmdlfem4x.h"
#include "lfdemod.h"
}
return code;
}
-/* Read the transmitted data of an EM4x50 tag
+/* Read the transmitted data of an EM4x50 tag from the graphbuffer
* Format:
*
* XXXXXXXX [row parity bit (even)] <- 8 bits plus parity
return EM4x50Read(Cmd, true);
}
-int CmdReadWord(const char *Cmd)
-{
- int Word = -1; //default to invalid word
- UsbCommand c;
-
- sscanf(Cmd, "%d", &Word);
+int usage_lf_em_read(void) {
+ PrintAndLog("Read EM4x05/EM4x69. Tag must be on antenna. ");
+ PrintAndLog("");
+ PrintAndLog("Usage: lf em readword [h] <address> <pwd>");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - this help");
+ PrintAndLog(" address - memory address to read. (0-15)");
+ PrintAndLog(" pwd - password (hex) (optional)");
+ PrintAndLog("samples:");
+ PrintAndLog(" lf em readword 1");
+ PrintAndLog(" lf em readword 1 11223344");
+ return 0;
+}
+int CmdReadWord(const char *Cmd) {
+ int addr, pwd;
+ bool usePwd = false;
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( strlen(Cmd) == 0 || ctmp == 'H' || ctmp == 'h' ) return usage_lf_em_read();
+
+ addr = param_get8ex(Cmd, 0, -1, 10);
+ pwd = param_get32ex(Cmd, 1, -1, 16);
- if ( (Word > 15) | (Word < 0) ) {
- PrintAndLog("Word must be between 0 and 15");
+ if ( (addr > 15) || (addr < 0 ) || ( addr == -1) ) {
+ PrintAndLog("Address must be between 0 and 15");
return 1;
}
+ if ( pwd == -1 )
+ PrintAndLog("Reading address %d", addr);
+ else {
+ usePwd = true;
+ PrintAndLog("Reading address %d | password %08X", addr, pwd);
+ }
- PrintAndLog("Reading word %d", Word);
-
- c.cmd = CMD_EM4X_READ_WORD;
- c.d.asBytes[0] = 0x0; //Normal mode
- c.arg[0] = 0;
- c.arg[1] = Word;
- c.arg[2] = 0;
+ UsbCommand c = {CMD_EM4X_READ_WORD, {addr, pwd, usePwd}};
+ clearCommandBuffer();
SendCommand(&c);
- return 0;
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)){
+ PrintAndLog("Command timed out");
+ return -1;
+ }
+
+ uint8_t got[6000]; // 8 bit preamble + 32 bit word response (max clock (128) * 40bits = 5120 samples)
+ GetFromBigBuf(got, sizeof(got), 0);
+ if ( !WaitForResponseTimeout(CMD_ACK, NULL, 8000) ) {
+ PrintAndLog("command execution time out");
+ return 0;
+ }
+ setGraphBuf(got, sizeof(got));
+ //todo: demodulate read data
+ return 1;
}
-int CmdReadWordPWD(const char *Cmd)
-{
- int Word = -1; //default to invalid word
- int Password = 0xFFFFFFFF; //default to blank password
- UsbCommand c;
+int usage_lf_em_write(void) {
+ PrintAndLog("Write EM4x05/EM4x69. Tag must be on antenna. ");
+ PrintAndLog("");
+ PrintAndLog("Usage: lf em writeword [h] <address> <data> <pwd>");
+ PrintAndLog("Options:");
+ PrintAndLog(" h - this help");
+ PrintAndLog(" address - memory address to write to. (0-15)");
+ PrintAndLog(" data - data to write (hex)");
+ PrintAndLog(" pwd - password (hex) (optional)");
+ PrintAndLog("samples:");
+ PrintAndLog(" lf em writeword 1");
+ PrintAndLog(" lf em writeword 1 deadc0de 11223344");
+ return 0;
+}
+int CmdWriteWord(const char *Cmd) {
+ uint8_t ctmp = param_getchar(Cmd, 0);
+ if ( strlen(Cmd) == 0 || ctmp == 'H' || ctmp == 'h' ) return usage_lf_em_write();
- sscanf(Cmd, "%d %x", &Word, &Password);
+ bool usePwd = false;
+
+ int addr = 16; // default to invalid address
+ int data = 0xFFFFFFFF; // default to blank data
+ int pwd = 0xFFFFFFFF; // default to blank password
- if ( (Word > 15) | (Word < 0) ) {
- PrintAndLog("Word must be between 0 and 15");
+ addr = param_get8ex(Cmd, 0, -1, 10);
+ data = param_get32ex(Cmd, 1, -1, 16);
+ pwd = param_get32ex(Cmd, 2, -1, 16);
+
+
+ if ( (addr > 15) || (addr < 0 ) || ( addr == -1) ) {
+ PrintAndLog("Address must be between 0 and 15");
return 1;
}
+ if ( pwd == -1 )
+ PrintAndLog("Writing address %d data %08X", addr, data);
+ else {
+ usePwd = true;
+ PrintAndLog("Writing address %d data %08X using password %08X", addr, data, pwd);
+ }
- PrintAndLog("Reading word %d with password %08X", Word, Password);
+ uint16_t flag = (addr << 8 ) | usePwd;
- c.cmd = CMD_EM4X_READ_WORD;
- c.d.asBytes[0] = 0x1; //Password mode
- c.arg[0] = 0;
- c.arg[1] = Word;
- c.arg[2] = Password;
+ UsbCommand c = {CMD_EM4X_WRITE_WORD, {flag, data, pwd}};
+ clearCommandBuffer();
SendCommand(&c);
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){
+ PrintAndLog("Error occurred, device did not respond during write operation.");
+ return -1;
+ }
+ //get response if there is one
+ uint8_t got[6000]; // 8 bit preamble + 32 bit word response (max clock (128) * 40bits = 5120 samples)
+ GetFromBigBuf(got, sizeof(got), 0);
+ if ( !WaitForResponseTimeout(CMD_ACK, NULL, 8000) ) {
+ PrintAndLog("command execution time out");
+ return 0;
+ }
+ setGraphBuf(got, sizeof(got));
+ //todo: check response for 00001010 then write data for write confirmation!
return 0;
}
+/*
int CmdWriteWord(const char *Cmd)
{
int Word = 16; //default to invalid block
SendCommand(&c);
return 0;
}
-
+*/
static command_t CommandTable[] =
{
{"help", CmdHelp, 1, "This help"},
{"em410xwatch", CmdEM410xWatch, 0, "['h'] -- Watches for EM410x 125/134 kHz tags (option 'h' for 134)"},
{"em410xspoof", CmdEM410xWatchnSpoof, 0, "['h'] --- Watches for EM410x 125/134 kHz tags, and replays them. (option 'h' for 134)" },
{"em410xwrite", CmdEM410xWrite, 0, "<UID> <'0' T5555> <'1' T55x7> [clock rate] -- Write EM410x UID to T5555(Q5) or T55x7 tag, optionally setting clock rate"},
- {"em4x50read", CmdEM4x50Read, 1, "Extract data from EM4x50 tag"},
- {"readword", CmdReadWord, 1, "<Word> -- Read EM4xxx word data"},
- {"readwordPWD", CmdReadWordPWD, 1, "<Word> <Password> -- Read EM4xxx word data in password mode"},
- {"writeword", CmdWriteWord, 1, "<Data> <Word> -- Write EM4xxx word data"},
- {"writewordPWD", CmdWriteWordPWD, 1, "<Data> <Word> <Password> -- Write EM4xxx word data in password mode"},
+ {"em4x50read", CmdEM4x50Read, 1, "demod data from EM4x50 tag from the graph buffer"},
+ {"readword", CmdReadWord, 1, "<Word> (pwd) -- Read EM4x05/EM4x69 word data"},
+
//{"readwordPWD", CmdReadWordPWD, 1, "<Word> <Password> -- Read EM4xxx word data in password mode"},
+ {"writeword", CmdWriteWord, 1, "<Word> <data> (pwd) -- Write EM4x05/EM4x69 word data"},
+
//{"writewordPWD", CmdWriteWordPWD, 1, "<Data> <Word> <Password> -- Write EM4xxx word data in password mode"},
{NULL, NULL, 0, NULL}
};
projects / proxmark3-svn / commitdiff