--- /dev/null
+/*
+ * FIPS-197 compliant AES implementation
+ *
+ * Copyright (C) 2006-2014, Brainspark B.V.
+ *
+ * This file is part of PolarSSL (http://www.polarssl.org)
+ * Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+/*
+ * The AES block cipher was designed by Vincent Rijmen and Joan Daemen.
+ *
+ * http://csrc.nist.gov/encryption/aes/rijndael/Rijndael.pdf
+ * http://csrc.nist.gov/publications/fips/fips197/fips-197.pdf
+ */
+
+#if !defined(POLARSSL_CONFIG_FILE)
+#include "polarssl_config.h"
+#else
+#include POLARSSL_CONFIG_FILE
+#endif
+
+#if defined(POLARSSL_AES_C)
+
+#include "aes.h"
+#if defined(POLARSSL_PADLOCK_C)
+#include "polarssl/padlock.h"
+#endif
+#if defined(POLARSSL_AESNI_C)
+#include "polarssl/aesni.h"
+#endif
+
+#if defined(POLARSSL_PLATFORM_C)
+#include "polarssl/platform.h"
+#else
+#define polarssl_printf printf
+#endif
+
+#if !defined(POLARSSL_AES_ALT)
+
+/* Implementation that should never be optimized out by the compiler */
+static void polarssl_zeroize( void *v, size_t n ) {
+ volatile unsigned char *p = v; while( n-- ) *p++ = 0;
+}
+
+/*
+ * 32-bit integer manipulation macros (little endian)
+ */
+#ifndef GET_UINT32_LE
+#define GET_UINT32_LE(n,b,i) \
+{ \
+ (n) = ( (uint32_t) (b)[(i) ] ) \
+ | ( (uint32_t) (b)[(i) + 1] << 8 ) \
+ | ( (uint32_t) (b)[(i) + 2] << 16 ) \
+ | ( (uint32_t) (b)[(i) + 3] << 24 ); \
+}
+#endif
+
+#ifndef PUT_UINT32_LE
+#define PUT_UINT32_LE(n,b,i) \
+{ \
+ (b)[(i) ] = (unsigned char) ( (n) ); \
+ (b)[(i) + 1] = (unsigned char) ( (n) >> 8 ); \
+ (b)[(i) + 2] = (unsigned char) ( (n) >> 16 ); \
+ (b)[(i) + 3] = (unsigned char) ( (n) >> 24 ); \
+}
+#endif
+
+#if defined(POLARSSL_PADLOCK_C) && \
+ ( defined(POLARSSL_HAVE_X86) || defined(PADLOCK_ALIGN16) )
+static int aes_padlock_ace = -1;
+#endif
+
+#if defined(POLARSSL_AES_ROM_TABLES)
+/*
+ * Forward S-box
+ */
+static const unsigned char FSb[256] =
+{
+ 0x63, 0x7C, 0x77, 0x7B, 0xF2, 0x6B, 0x6F, 0xC5,
+ 0x30, 0x01, 0x67, 0x2B, 0xFE, 0xD7, 0xAB, 0x76,
+ 0xCA, 0x82, 0xC9, 0x7D, 0xFA, 0x59, 0x47, 0xF0,
+ 0xAD, 0xD4, 0xA2, 0xAF, 0x9C, 0xA4, 0x72, 0xC0,
+ 0xB7, 0xFD, 0x93, 0x26, 0x36, 0x3F, 0xF7, 0xCC,
+ 0x34, 0xA5, 0xE5, 0xF1, 0x71, 0xD8, 0x31, 0x15,
+ 0x04, 0xC7, 0x23, 0xC3, 0x18, 0x96, 0x05, 0x9A,
+ 0x07, 0x12, 0x80, 0xE2, 0xEB, 0x27, 0xB2, 0x75,
+ 0x09, 0x83, 0x2C, 0x1A, 0x1B, 0x6E, 0x5A, 0xA0,
+ 0x52, 0x3B, 0xD6, 0xB3, 0x29, 0xE3, 0x2F, 0x84,
+ 0x53, 0xD1, 0x00, 0xED, 0x20, 0xFC, 0xB1, 0x5B,
+ 0x6A, 0xCB, 0xBE, 0x39, 0x4A, 0x4C, 0x58, 0xCF,
+ 0xD0, 0xEF, 0xAA, 0xFB, 0x43, 0x4D, 0x33, 0x85,
+ 0x45, 0xF9, 0x02, 0x7F, 0x50, 0x3C, 0x9F, 0xA8,
+ 0x51, 0xA3, 0x40, 0x8F, 0x92, 0x9D, 0x38, 0xF5,
+ 0xBC, 0xB6, 0xDA, 0x21, 0x10, 0xFF, 0xF3, 0xD2,
+ 0xCD, 0x0C, 0x13, 0xEC, 0x5F, 0x97, 0x44, 0x17,
+ 0xC4, 0xA7, 0x7E, 0x3D, 0x64, 0x5D, 0x19, 0x73,
+ 0x60, 0x81, 0x4F, 0xDC, 0x22, 0x2A, 0x90, 0x88,
+ 0x46, 0xEE, 0xB8, 0x14, 0xDE, 0x5E, 0x0B, 0xDB,
+ 0xE0, 0x32, 0x3A, 0x0A, 0x49, 0x06, 0x24, 0x5C,
+ 0xC2, 0xD3, 0xAC, 0x62, 0x91, 0x95, 0xE4, 0x79,
+ 0xE7, 0xC8, 0x37, 0x6D, 0x8D, 0xD5, 0x4E, 0xA9,
+ 0x6C, 0x56, 0xF4, 0xEA, 0x65, 0x7A, 0xAE, 0x08,
+ 0xBA, 0x78, 0x25, 0x2E, 0x1C, 0xA6, 0xB4, 0xC6,
+ 0xE8, 0xDD, 0x74, 0x1F, 0x4B, 0xBD, 0x8B, 0x8A,
+ 0x70, 0x3E, 0xB5, 0x66, 0x48, 0x03, 0xF6, 0x0E,
+ 0x61, 0x35, 0x57, 0xB9, 0x86, 0xC1, 0x1D, 0x9E,
+ 0xE1, 0xF8, 0x98, 0x11, 0x69, 0xD9, 0x8E, 0x94,
+ 0x9B, 0x1E, 0x87, 0xE9, 0xCE, 0x55, 0x28, 0xDF,
+ 0x8C, 0xA1, 0x89, 0x0D, 0xBF, 0xE6, 0x42, 0x68,
+ 0x41, 0x99, 0x2D, 0x0F, 0xB0, 0x54, 0xBB, 0x16
+};
+
+/*
+ * Forward tables
+ */
+#define FT \
+\
+ V(A5,63,63,C6), V(84,7C,7C,F8), V(99,77,77,EE), V(8D,7B,7B,F6), \
+ V(0D,F2,F2,FF), V(BD,6B,6B,D6), V(B1,6F,6F,DE), V(54,C5,C5,91), \
+ V(50,30,30,60), V(03,01,01,02), V(A9,67,67,CE), V(7D,2B,2B,56), \
+ V(19,FE,FE,E7), V(62,D7,D7,B5), V(E6,AB,AB,4D), V(9A,76,76,EC), \
+ V(45,CA,CA,8F), V(9D,82,82,1F), V(40,C9,C9,89), V(87,7D,7D,FA), \
+ V(15,FA,FA,EF), V(EB,59,59,B2), V(C9,47,47,8E), V(0B,F0,F0,FB), \
+ V(EC,AD,AD,41), V(67,D4,D4,B3), V(FD,A2,A2,5F), V(EA,AF,AF,45), \
+ V(BF,9C,9C,23), V(F7,A4,A4,53), V(96,72,72,E4), V(5B,C0,C0,9B), \
+ V(C2,B7,B7,75), V(1C,FD,FD,E1), V(AE,93,93,3D), V(6A,26,26,4C), \
+ V(5A,36,36,6C), V(41,3F,3F,7E), V(02,F7,F7,F5), V(4F,CC,CC,83), \
+ V(5C,34,34,68), V(F4,A5,A5,51), V(34,E5,E5,D1), V(08,F1,F1,F9), \
+ V(93,71,71,E2), V(73,D8,D8,AB), V(53,31,31,62), V(3F,15,15,2A), \
+ V(0C,04,04,08), V(52,C7,C7,95), V(65,23,23,46), V(5E,C3,C3,9D), \
+ V(28,18,18,30), V(A1,96,96,37), V(0F,05,05,0A), V(B5,9A,9A,2F), \
+ V(09,07,07,0E), V(36,12,12,24), V(9B,80,80,1B), V(3D,E2,E2,DF), \
+ V(26,EB,EB,CD), V(69,27,27,4E), V(CD,B2,B2,7F), V(9F,75,75,EA), \
+ V(1B,09,09,12), V(9E,83,83,1D), V(74,2C,2C,58), V(2E,1A,1A,34), \
+ V(2D,1B,1B,36), V(B2,6E,6E,DC), V(EE,5A,5A,B4), V(FB,A0,A0,5B), \
+ V(F6,52,52,A4), V(4D,3B,3B,76), V(61,D6,D6,B7), V(CE,B3,B3,7D), \
+ V(7B,29,29,52), V(3E,E3,E3,DD), V(71,2F,2F,5E), V(97,84,84,13), \
+ V(F5,53,53,A6), V(68,D1,D1,B9), V(00,00,00,00), V(2C,ED,ED,C1), \
+ V(60,20,20,40), V(1F,FC,FC,E3), V(C8,B1,B1,79), V(ED,5B,5B,B6), \
+ V(BE,6A,6A,D4), V(46,CB,CB,8D), V(D9,BE,BE,67), V(4B,39,39,72), \
+ V(DE,4A,4A,94), V(D4,4C,4C,98), V(E8,58,58,B0), V(4A,CF,CF,85), \
+ V(6B,D0,D0,BB), V(2A,EF,EF,C5), V(E5,AA,AA,4F), V(16,FB,FB,ED), \
+ V(C5,43,43,86), V(D7,4D,4D,9A), V(55,33,33,66), V(94,85,85,11), \
+ V(CF,45,45,8A), V(10,F9,F9,E9), V(06,02,02,04), V(81,7F,7F,FE), \
+ V(F0,50,50,A0), V(44,3C,3C,78), V(BA,9F,9F,25), V(E3,A8,A8,4B), \
+ V(F3,51,51,A2), V(FE,A3,A3,5D), V(C0,40,40,80), V(8A,8F,8F,05), \
+ V(AD,92,92,3F), V(BC,9D,9D,21), V(48,38,38,70), V(04,F5,F5,F1), \
+ V(DF,BC,BC,63), V(C1,B6,B6,77), V(75,DA,DA,AF), V(63,21,21,42), \
+ V(30,10,10,20), V(1A,FF,FF,E5), V(0E,F3,F3,FD), V(6D,D2,D2,BF), \
+ V(4C,CD,CD,81), V(14,0C,0C,18), V(35,13,13,26), V(2F,EC,EC,C3), \
+ V(E1,5F,5F,BE), V(A2,97,97,35), V(CC,44,44,88), V(39,17,17,2E), \
+ V(57,C4,C4,93), V(F2,A7,A7,55), V(82,7E,7E,FC), V(47,3D,3D,7A), \
+ V(AC,64,64,C8), V(E7,5D,5D,BA), V(2B,19,19,32), V(95,73,73,E6), \
+ V(A0,60,60,C0), V(98,81,81,19), V(D1,4F,4F,9E), V(7F,DC,DC,A3), \
+ V(66,22,22,44), V(7E,2A,2A,54), V(AB,90,90,3B), V(83,88,88,0B), \
+ V(CA,46,46,8C), V(29,EE,EE,C7), V(D3,B8,B8,6B), V(3C,14,14,28), \
+ V(79,DE,DE,A7), V(E2,5E,5E,BC), V(1D,0B,0B,16), V(76,DB,DB,AD), \
+ V(3B,E0,E0,DB), V(56,32,32,64), V(4E,3A,3A,74), V(1E,0A,0A,14), \
+ V(DB,49,49,92), V(0A,06,06,0C), V(6C,24,24,48), V(E4,5C,5C,B8), \
+ V(5D,C2,C2,9F), V(6E,D3,D3,BD), V(EF,AC,AC,43), V(A6,62,62,C4), \
+ V(A8,91,91,39), V(A4,95,95,31), V(37,E4,E4,D3), V(8B,79,79,F2), \
+ V(32,E7,E7,D5), V(43,C8,C8,8B), V(59,37,37,6E), V(B7,6D,6D,DA), \
+ V(8C,8D,8D,01), V(64,D5,D5,B1), V(D2,4E,4E,9C), V(E0,A9,A9,49), \
+ V(B4,6C,6C,D8), V(FA,56,56,AC), V(07,F4,F4,F3), V(25,EA,EA,CF), \
+ V(AF,65,65,CA), V(8E,7A,7A,F4), V(E9,AE,AE,47), V(18,08,08,10), \
+ V(D5,BA,BA,6F), V(88,78,78,F0), V(6F,25,25,4A), V(72,2E,2E,5C), \
+ V(24,1C,1C,38), V(F1,A6,A6,57), V(C7,B4,B4,73), V(51,C6,C6,97), \
+ V(23,E8,E8,CB), V(7C,DD,DD,A1), V(9C,74,74,E8), V(21,1F,1F,3E), \
+ V(DD,4B,4B,96), V(DC,BD,BD,61), V(86,8B,8B,0D), V(85,8A,8A,0F), \
+ V(90,70,70,E0), V(42,3E,3E,7C), V(C4,B5,B5,71), V(AA,66,66,CC), \
+ V(D8,48,48,90), V(05,03,03,06), V(01,F6,F6,F7), V(12,0E,0E,1C), \
+ V(A3,61,61,C2), V(5F,35,35,6A), V(F9,57,57,AE), V(D0,B9,B9,69), \
+ V(91,86,86,17), V(58,C1,C1,99), V(27,1D,1D,3A), V(B9,9E,9E,27), \
+ V(38,E1,E1,D9), V(13,F8,F8,EB), V(B3,98,98,2B), V(33,11,11,22), \
+ V(BB,69,69,D2), V(70,D9,D9,A9), V(89,8E,8E,07), V(A7,94,94,33), \
+ V(B6,9B,9B,2D), V(22,1E,1E,3C), V(92,87,87,15), V(20,E9,E9,C9), \
+ V(49,CE,CE,87), V(FF,55,55,AA), V(78,28,28,50), V(7A,DF,DF,A5), \
+ V(8F,8C,8C,03), V(F8,A1,A1,59), V(80,89,89,09), V(17,0D,0D,1A), \
+ V(DA,BF,BF,65), V(31,E6,E6,D7), V(C6,42,42,84), V(B8,68,68,D0), \
+ V(C3,41,41,82), V(B0,99,99,29), V(77,2D,2D,5A), V(11,0F,0F,1E), \
+ V(CB,B0,B0,7B), V(FC,54,54,A8), V(D6,BB,BB,6D), V(3A,16,16,2C)
+
+#define V(a,b,c,d) 0x##a##b##c##d
+static const uint32_t FT0[256] = { FT };
+#undef V
+
+#define V(a,b,c,d) 0x##b##c##d##a
+static const uint32_t FT1[256] = { FT };
+#undef V
+
+#define V(a,b,c,d) 0x##c##d##a##b
+static const uint32_t FT2[256] = { FT };
+#undef V
+
+#define V(a,b,c,d) 0x##d##a##b##c
+static const uint32_t FT3[256] = { FT };
+#undef V
+
+#undef FT
+
+/*
+ * Reverse S-box
+ */
+static const unsigned char RSb[256] =
+{
+ 0x52, 0x09, 0x6A, 0xD5, 0x30, 0x36, 0xA5, 0x38,
+ 0xBF, 0x40, 0xA3, 0x9E, 0x81, 0xF3, 0xD7, 0xFB,
+ 0x7C, 0xE3, 0x39, 0x82, 0x9B, 0x2F, 0xFF, 0x87,
+ 0x34, 0x8E, 0x43, 0x44, 0xC4, 0xDE, 0xE9, 0xCB,
+ 0x54, 0x7B, 0x94, 0x32, 0xA6, 0xC2, 0x23, 0x3D,
+ 0xEE, 0x4C, 0x95, 0x0B, 0x42, 0xFA, 0xC3, 0x4E,
+ 0x08, 0x2E, 0xA1, 0x66, 0x28, 0xD9, 0x24, 0xB2,
+ 0x76, 0x5B, 0xA2, 0x49, 0x6D, 0x8B, 0xD1, 0x25,
+ 0x72, 0xF8, 0xF6, 0x64, 0x86, 0x68, 0x98, 0x16,
+ 0xD4, 0xA4, 0x5C, 0xCC, 0x5D, 0x65, 0xB6, 0x92,
+ 0x6C, 0x70, 0x48, 0x50, 0xFD, 0xED, 0xB9, 0xDA,
+ 0x5E, 0x15, 0x46, 0x57, 0xA7, 0x8D, 0x9D, 0x84,
+ 0x90, 0xD8, 0xAB, 0x00, 0x8C, 0xBC, 0xD3, 0x0A,
+ 0xF7, 0xE4, 0x58, 0x05, 0xB8, 0xB3, 0x45, 0x06,
+ 0xD0, 0x2C, 0x1E, 0x8F, 0xCA, 0x3F, 0x0F, 0x02,
+ 0xC1, 0xAF, 0xBD, 0x03, 0x01, 0x13, 0x8A, 0x6B,
+ 0x3A, 0x91, 0x11, 0x41, 0x4F, 0x67, 0xDC, 0xEA,
+ 0x97, 0xF2, 0xCF, 0xCE, 0xF0, 0xB4, 0xE6, 0x73,
+ 0x96, 0xAC, 0x74, 0x22, 0xE7, 0xAD, 0x35, 0x85,
+ 0xE2, 0xF9, 0x37, 0xE8, 0x1C, 0x75, 0xDF, 0x6E,
+ 0x47, 0xF1, 0x1A, 0x71, 0x1D, 0x29, 0xC5, 0x89,
+ 0x6F, 0xB7, 0x62, 0x0E, 0xAA, 0x18, 0xBE, 0x1B,
+ 0xFC, 0x56, 0x3E, 0x4B, 0xC6, 0xD2, 0x79, 0x20,
+ 0x9A, 0xDB, 0xC0, 0xFE, 0x78, 0xCD, 0x5A, 0xF4,
+ 0x1F, 0xDD, 0xA8, 0x33, 0x88, 0x07, 0xC7, 0x31,
+ 0xB1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xEC, 0x5F,
+ 0x60, 0x51, 0x7F, 0xA9, 0x19, 0xB5, 0x4A, 0x0D,
+ 0x2D, 0xE5, 0x7A, 0x9F, 0x93, 0xC9, 0x9C, 0xEF,
+ 0xA0, 0xE0, 0x3B, 0x4D, 0xAE, 0x2A, 0xF5, 0xB0,
+ 0xC8, 0xEB, 0xBB, 0x3C, 0x83, 0x53, 0x99, 0x61,
+ 0x17, 0x2B, 0x04, 0x7E, 0xBA, 0x77, 0xD6, 0x26,
+ 0xE1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0C, 0x7D
+};
+
+/*
+ * Reverse tables
+ */
+#define RT \
+\
+ V(50,A7,F4,51), V(53,65,41,7E), V(C3,A4,17,1A), V(96,5E,27,3A), \
+ V(CB,6B,AB,3B), V(F1,45,9D,1F), V(AB,58,FA,AC), V(93,03,E3,4B), \
+ V(55,FA,30,20), V(F6,6D,76,AD), V(91,76,CC,88), V(25,4C,02,F5), \
+ V(FC,D7,E5,4F), V(D7,CB,2A,C5), V(80,44,35,26), V(8F,A3,62,B5), \
+ V(49,5A,B1,DE), V(67,1B,BA,25), V(98,0E,EA,45), V(E1,C0,FE,5D), \
+ V(02,75,2F,C3), V(12,F0,4C,81), V(A3,97,46,8D), V(C6,F9,D3,6B), \
+ V(E7,5F,8F,03), V(95,9C,92,15), V(EB,7A,6D,BF), V(DA,59,52,95), \
+ V(2D,83,BE,D4), V(D3,21,74,58), V(29,69,E0,49), V(44,C8,C9,8E), \
+ V(6A,89,C2,75), V(78,79,8E,F4), V(6B,3E,58,99), V(DD,71,B9,27), \
+ V(B6,4F,E1,BE), V(17,AD,88,F0), V(66,AC,20,C9), V(B4,3A,CE,7D), \
+ V(18,4A,DF,63), V(82,31,1A,E5), V(60,33,51,97), V(45,7F,53,62), \
+ V(E0,77,64,B1), V(84,AE,6B,BB), V(1C,A0,81,FE), V(94,2B,08,F9), \
+ V(58,68,48,70), V(19,FD,45,8F), V(87,6C,DE,94), V(B7,F8,7B,52), \
+ V(23,D3,73,AB), V(E2,02,4B,72), V(57,8F,1F,E3), V(2A,AB,55,66), \
+ V(07,28,EB,B2), V(03,C2,B5,2F), V(9A,7B,C5,86), V(A5,08,37,D3), \
+ V(F2,87,28,30), V(B2,A5,BF,23), V(BA,6A,03,02), V(5C,82,16,ED), \
+ V(2B,1C,CF,8A), V(92,B4,79,A7), V(F0,F2,07,F3), V(A1,E2,69,4E), \
+ V(CD,F4,DA,65), V(D5,BE,05,06), V(1F,62,34,D1), V(8A,FE,A6,C4), \
+ V(9D,53,2E,34), V(A0,55,F3,A2), V(32,E1,8A,05), V(75,EB,F6,A4), \
+ V(39,EC,83,0B), V(AA,EF,60,40), V(06,9F,71,5E), V(51,10,6E,BD), \
+ V(F9,8A,21,3E), V(3D,06,DD,96), V(AE,05,3E,DD), V(46,BD,E6,4D), \
+ V(B5,8D,54,91), V(05,5D,C4,71), V(6F,D4,06,04), V(FF,15,50,60), \
+ V(24,FB,98,19), V(97,E9,BD,D6), V(CC,43,40,89), V(77,9E,D9,67), \
+ V(BD,42,E8,B0), V(88,8B,89,07), V(38,5B,19,E7), V(DB,EE,C8,79), \
+ V(47,0A,7C,A1), V(E9,0F,42,7C), V(C9,1E,84,F8), V(00,00,00,00), \
+ V(83,86,80,09), V(48,ED,2B,32), V(AC,70,11,1E), V(4E,72,5A,6C), \
+ V(FB,FF,0E,FD), V(56,38,85,0F), V(1E,D5,AE,3D), V(27,39,2D,36), \
+ V(64,D9,0F,0A), V(21,A6,5C,68), V(D1,54,5B,9B), V(3A,2E,36,24), \
+ V(B1,67,0A,0C), V(0F,E7,57,93), V(D2,96,EE,B4), V(9E,91,9B,1B), \
+ V(4F,C5,C0,80), V(A2,20,DC,61), V(69,4B,77,5A), V(16,1A,12,1C), \
+ V(0A,BA,93,E2), V(E5,2A,A0,C0), V(43,E0,22,3C), V(1D,17,1B,12), \
+ V(0B,0D,09,0E), V(AD,C7,8B,F2), V(B9,A8,B6,2D), V(C8,A9,1E,14), \
+ V(85,19,F1,57), V(4C,07,75,AF), V(BB,DD,99,EE), V(FD,60,7F,A3), \
+ V(9F,26,01,F7), V(BC,F5,72,5C), V(C5,3B,66,44), V(34,7E,FB,5B), \
+ V(76,29,43,8B), V(DC,C6,23,CB), V(68,FC,ED,B6), V(63,F1,E4,B8), \
+ V(CA,DC,31,D7), V(10,85,63,42), V(40,22,97,13), V(20,11,C6,84), \
+ V(7D,24,4A,85), V(F8,3D,BB,D2), V(11,32,F9,AE), V(6D,A1,29,C7), \
+ V(4B,2F,9E,1D), V(F3,30,B2,DC), V(EC,52,86,0D), V(D0,E3,C1,77), \
+ V(6C,16,B3,2B), V(99,B9,70,A9), V(FA,48,94,11), V(22,64,E9,47), \
+ V(C4,8C,FC,A8), V(1A,3F,F0,A0), V(D8,2C,7D,56), V(EF,90,33,22), \
+ V(C7,4E,49,87), V(C1,D1,38,D9), V(FE,A2,CA,8C), V(36,0B,D4,98), \
+ V(CF,81,F5,A6), V(28,DE,7A,A5), V(26,8E,B7,DA), V(A4,BF,AD,3F), \
+ V(E4,9D,3A,2C), V(0D,92,78,50), V(9B,CC,5F,6A), V(62,46,7E,54), \
+ V(C2,13,8D,F6), V(E8,B8,D8,90), V(5E,F7,39,2E), V(F5,AF,C3,82), \
+ V(BE,80,5D,9F), V(7C,93,D0,69), V(A9,2D,D5,6F), V(B3,12,25,CF), \
+ V(3B,99,AC,C8), V(A7,7D,18,10), V(6E,63,9C,E8), V(7B,BB,3B,DB), \
+ V(09,78,26,CD), V(F4,18,59,6E), V(01,B7,9A,EC), V(A8,9A,4F,83), \
+ V(65,6E,95,E6), V(7E,E6,FF,AA), V(08,CF,BC,21), V(E6,E8,15,EF), \
+ V(D9,9B,E7,BA), V(CE,36,6F,4A), V(D4,09,9F,EA), V(D6,7C,B0,29), \
+ V(AF,B2,A4,31), V(31,23,3F,2A), V(30,94,A5,C6), V(C0,66,A2,35), \
+ V(37,BC,4E,74), V(A6,CA,82,FC), V(B0,D0,90,E0), V(15,D8,A7,33), \
+ V(4A,98,04,F1), V(F7,DA,EC,41), V(0E,50,CD,7F), V(2F,F6,91,17), \
+ V(8D,D6,4D,76), V(4D,B0,EF,43), V(54,4D,AA,CC), V(DF,04,96,E4), \
+ V(E3,B5,D1,9E), V(1B,88,6A,4C), V(B8,1F,2C,C1), V(7F,51,65,46), \
+ V(04,EA,5E,9D), V(5D,35,8C,01), V(73,74,87,FA), V(2E,41,0B,FB), \
+ V(5A,1D,67,B3), V(52,D2,DB,92), V(33,56,10,E9), V(13,47,D6,6D), \
+ V(8C,61,D7,9A), V(7A,0C,A1,37), V(8E,14,F8,59), V(89,3C,13,EB), \
+ V(EE,27,A9,CE), V(35,C9,61,B7), V(ED,E5,1C,E1), V(3C,B1,47,7A), \
+ V(59,DF,D2,9C), V(3F,73,F2,55), V(79,CE,14,18), V(BF,37,C7,73), \
+ V(EA,CD,F7,53), V(5B,AA,FD,5F), V(14,6F,3D,DF), V(86,DB,44,78), \
+ V(81,F3,AF,CA), V(3E,C4,68,B9), V(2C,34,24,38), V(5F,40,A3,C2), \
+ V(72,C3,1D,16), V(0C,25,E2,BC), V(8B,49,3C,28), V(41,95,0D,FF), \
+ V(71,01,A8,39), V(DE,B3,0C,08), V(9C,E4,B4,D8), V(90,C1,56,64), \
+ V(61,84,CB,7B), V(70,B6,32,D5), V(74,5C,6C,48), V(42,57,B8,D0)
+
+#define V(a,b,c,d) 0x##a##b##c##d
+static const uint32_t RT0[256] = { RT };
+#undef V
+
+#define V(a,b,c,d) 0x##b##c##d##a
+static const uint32_t RT1[256] = { RT };
+#undef V
+
+#define V(a,b,c,d) 0x##c##d##a##b
+static const uint32_t RT2[256] = { RT };
+#undef V
+
+#define V(a,b,c,d) 0x##d##a##b##c
+static const uint32_t RT3[256] = { RT };
+#undef V
+
+#undef RT
+
+/*
+ * Round constants
+ */
+static const uint32_t RCON[10] =
+{
+ 0x00000001, 0x00000002, 0x00000004, 0x00000008,
+ 0x00000010, 0x00000020, 0x00000040, 0x00000080,
+ 0x0000001B, 0x00000036
+};
+
+#else /* POLARSSL_AES_ROM_TABLES */
+
+/*
+ * Forward S-box & tables
+ */
+static unsigned char FSb[256];
+static uint32_t FT0[256];
+static uint32_t FT1[256];
+static uint32_t FT2[256];
+static uint32_t FT3[256];
+
+/*
+ * Reverse S-box & tables
+ */
+static unsigned char RSb[256];
+static uint32_t RT0[256];
+static uint32_t RT1[256];
+static uint32_t RT2[256];
+static uint32_t RT3[256];
+
+/*
+ * Round constants
+ */
+static uint32_t RCON[10];
+
+/*
+ * Tables generation code
+ */
+#define ROTL8(x) ( ( x << 8 ) & 0xFFFFFFFF ) | ( x >> 24 )
+#define XTIME(x) ( ( x << 1 ) ^ ( ( x & 0x80 ) ? 0x1B : 0x00 ) )
+#define MUL(x,y) ( ( x && y ) ? pow[(log[x]+log[y]) % 255] : 0 )
+
+static int aes_init_done = 0;
+
+static void aes_gen_tables( void )
+{
+ int i, x, y, z;
+ int pow[256];
+ int log[256];
+
+ /*
+ * compute pow and log tables over GF(2^8)
+ */
+ for( i = 0, x = 1; i < 256; i++ )
+ {
+ pow[i] = x;
+ log[x] = i;
+ x = ( x ^ XTIME( x ) ) & 0xFF;
+ }
+
+ /*
+ * calculate the round constants
+ */
+ for( i = 0, x = 1; i < 10; i++ )
+ {
+ RCON[i] = (uint32_t) x;
+ x = XTIME( x ) & 0xFF;
+ }
+
+ /*
+ * generate the forward and reverse S-boxes
+ */
+ FSb[0x00] = 0x63;
+ RSb[0x63] = 0x00;
+
+ for( i = 1; i < 256; i++ )
+ {
+ x = pow[255 - log[i]];
+
+ y = x; y = ( ( y << 1 ) | ( y >> 7 ) ) & 0xFF;
+ x ^= y; y = ( ( y << 1 ) | ( y >> 7 ) ) & 0xFF;
+ x ^= y; y = ( ( y << 1 ) | ( y >> 7 ) ) & 0xFF;
+ x ^= y; y = ( ( y << 1 ) | ( y >> 7 ) ) & 0xFF;
+ x ^= y ^ 0x63;
+
+ FSb[i] = (unsigned char) x;
+ RSb[x] = (unsigned char) i;
+ }
+
+ /*
+ * generate the forward and reverse tables
+ */
+ for( i = 0; i < 256; i++ )
+ {
+ x = FSb[i];
+ y = XTIME( x ) & 0xFF;
+ z = ( y ^ x ) & 0xFF;
+
+ FT0[i] = ( (uint32_t) y ) ^
+ ( (uint32_t) x << 8 ) ^
+ ( (uint32_t) x << 16 ) ^
+ ( (uint32_t) z << 24 );
+
+ FT1[i] = ROTL8( FT0[i] );
+ FT2[i] = ROTL8( FT1[i] );
+ FT3[i] = ROTL8( FT2[i] );
+
+ x = RSb[i];
+
+ RT0[i] = ( (uint32_t) MUL( 0x0E, x ) ) ^
+ ( (uint32_t) MUL( 0x09, x ) << 8 ) ^
+ ( (uint32_t) MUL( 0x0D, x ) << 16 ) ^
+ ( (uint32_t) MUL( 0x0B, x ) << 24 );
+
+ RT1[i] = ROTL8( RT0[i] );
+ RT2[i] = ROTL8( RT1[i] );
+ RT3[i] = ROTL8( RT2[i] );
+ }
+}
+
+#endif /* POLARSSL_AES_ROM_TABLES */
+
+void aes_init( aes_context *ctx )
+{
+ memset( ctx, 0, sizeof( aes_context ) );
+}
+
+void aes_free( aes_context *ctx )
+{
+ if( ctx == NULL )
+ return;
+
+ polarssl_zeroize( ctx, sizeof( aes_context ) );
+}
+
+/*
+ * AES key schedule (encryption)
+ */
+int aes_setkey_enc( aes_context *ctx, const unsigned char *key,
+ unsigned int keysize )
+{
+ unsigned int i;
+ uint32_t *RK;
+
+#if !defined(POLARSSL_AES_ROM_TABLES)
+ if( aes_init_done == 0 )
+ {
+ aes_gen_tables();
+ aes_init_done = 1;
+
+ }
+#endif
+
+ switch( keysize )
+ {
+ case 128: ctx->nr = 10; break;
+ case 192: ctx->nr = 12; break;
+ case 256: ctx->nr = 14; break;
+ default : return( POLARSSL_ERR_AES_INVALID_KEY_LENGTH );
+ }
+
+#if defined(POLARSSL_PADLOCK_C) && defined(PADLOCK_ALIGN16)
+ if( aes_padlock_ace == -1 )
+ aes_padlock_ace = padlock_supports( PADLOCK_ACE );
+
+ if( aes_padlock_ace )
+ ctx->rk = RK = PADLOCK_ALIGN16( ctx->buf );
+ else
+#endif
+ ctx->rk = RK = ctx->buf;
+
+#if defined(POLARSSL_AESNI_C) && defined(POLARSSL_HAVE_X86_64)
+ if( aesni_supports( POLARSSL_AESNI_AES ) )
+ return( aesni_setkey_enc( (unsigned char *) ctx->rk, key, keysize ) );
+#endif
+
+ for( i = 0; i < ( keysize >> 5 ); i++ )
+ {
+ GET_UINT32_LE( RK[i], key, i << 2 );
+ }
+
+ switch( ctx->nr )
+ {
+ case 10:
+
+ for( i = 0; i < 10; i++, RK += 4 )
+ {
+ RK[4] = RK[0] ^ RCON[i] ^
+ ( (uint32_t) FSb[ ( RK[3] >> 8 ) & 0xFF ] ) ^
+ ( (uint32_t) FSb[ ( RK[3] >> 16 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) FSb[ ( RK[3] >> 24 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) FSb[ ( RK[3] ) & 0xFF ] << 24 );
+
+ RK[5] = RK[1] ^ RK[4];
+ RK[6] = RK[2] ^ RK[5];
+ RK[7] = RK[3] ^ RK[6];
+ }
+ break;
+
+ case 12:
+
+ for( i = 0; i < 8; i++, RK += 6 )
+ {
+ RK[6] = RK[0] ^ RCON[i] ^
+ ( (uint32_t) FSb[ ( RK[5] >> 8 ) & 0xFF ] ) ^
+ ( (uint32_t) FSb[ ( RK[5] >> 16 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) FSb[ ( RK[5] >> 24 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) FSb[ ( RK[5] ) & 0xFF ] << 24 );
+
+ RK[7] = RK[1] ^ RK[6];
+ RK[8] = RK[2] ^ RK[7];
+ RK[9] = RK[3] ^ RK[8];
+ RK[10] = RK[4] ^ RK[9];
+ RK[11] = RK[5] ^ RK[10];
+ }
+ break;
+
+ case 14:
+
+ for( i = 0; i < 7; i++, RK += 8 )
+ {
+ RK[8] = RK[0] ^ RCON[i] ^
+ ( (uint32_t) FSb[ ( RK[7] >> 8 ) & 0xFF ] ) ^
+ ( (uint32_t) FSb[ ( RK[7] >> 16 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) FSb[ ( RK[7] >> 24 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) FSb[ ( RK[7] ) & 0xFF ] << 24 );
+
+ RK[9] = RK[1] ^ RK[8];
+ RK[10] = RK[2] ^ RK[9];
+ RK[11] = RK[3] ^ RK[10];
+
+ RK[12] = RK[4] ^
+ ( (uint32_t) FSb[ ( RK[11] ) & 0xFF ] ) ^
+ ( (uint32_t) FSb[ ( RK[11] >> 8 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) FSb[ ( RK[11] >> 16 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) FSb[ ( RK[11] >> 24 ) & 0xFF ] << 24 );
+
+ RK[13] = RK[5] ^ RK[12];
+ RK[14] = RK[6] ^ RK[13];
+ RK[15] = RK[7] ^ RK[14];
+ }
+ break;
+ }
+
+ return( 0 );
+}
+
+/*
+ * AES key schedule (decryption)
+ */
+int aes_setkey_dec( aes_context *ctx, const unsigned char *key,
+ unsigned int keysize )
+{
+ int i, j, ret;
+ aes_context cty;
+ uint32_t *RK;
+ uint32_t *SK;
+
+ aes_init( &cty );
+
+#if defined(POLARSSL_PADLOCK_C) && defined(PADLOCK_ALIGN16)
+ if( aes_padlock_ace == -1 )
+ aes_padlock_ace = padlock_supports( PADLOCK_ACE );
+
+ if( aes_padlock_ace )
+ ctx->rk = RK = PADLOCK_ALIGN16( ctx->buf );
+ else
+#endif
+ ctx->rk = RK = ctx->buf;
+
+ /* Also checks keysize */
+ if( ( ret = aes_setkey_enc( &cty, key, keysize ) ) != 0 )
+ goto exit;
+
+ ctx->nr = cty.nr;
+
+#if defined(POLARSSL_AESNI_C) && defined(POLARSSL_HAVE_X86_64)
+ if( aesni_supports( POLARSSL_AESNI_AES ) )
+ {
+ aesni_inverse_key( (unsigned char *) ctx->rk,
+ (const unsigned char *) cty.rk, ctx->nr );
+ goto exit;
+ }
+#endif
+
+ SK = cty.rk + cty.nr * 4;
+
+ *RK++ = *SK++;
+ *RK++ = *SK++;
+ *RK++ = *SK++;
+ *RK++ = *SK++;
+
+ for( i = ctx->nr - 1, SK -= 8; i > 0; i--, SK -= 8 )
+ {
+ for( j = 0; j < 4; j++, SK++ )
+ {
+ *RK++ = RT0[ FSb[ ( *SK ) & 0xFF ] ] ^
+ RT1[ FSb[ ( *SK >> 8 ) & 0xFF ] ] ^
+ RT2[ FSb[ ( *SK >> 16 ) & 0xFF ] ] ^
+ RT3[ FSb[ ( *SK >> 24 ) & 0xFF ] ];
+ }
+ }
+
+ *RK++ = *SK++;
+ *RK++ = *SK++;
+ *RK++ = *SK++;
+ *RK++ = *SK++;
+
+exit:
+ aes_free( &cty );
+
+ return( ret );
+}
+
+#define AES_FROUND(X0,X1,X2,X3,Y0,Y1,Y2,Y3) \
+{ \
+ X0 = *RK++ ^ FT0[ ( Y0 ) & 0xFF ] ^ \
+ FT1[ ( Y1 >> 8 ) & 0xFF ] ^ \
+ FT2[ ( Y2 >> 16 ) & 0xFF ] ^ \
+ FT3[ ( Y3 >> 24 ) & 0xFF ]; \
+ \
+ X1 = *RK++ ^ FT0[ ( Y1 ) & 0xFF ] ^ \
+ FT1[ ( Y2 >> 8 ) & 0xFF ] ^ \
+ FT2[ ( Y3 >> 16 ) & 0xFF ] ^ \
+ FT3[ ( Y0 >> 24 ) & 0xFF ]; \
+ \
+ X2 = *RK++ ^ FT0[ ( Y2 ) & 0xFF ] ^ \
+ FT1[ ( Y3 >> 8 ) & 0xFF ] ^ \
+ FT2[ ( Y0 >> 16 ) & 0xFF ] ^ \
+ FT3[ ( Y1 >> 24 ) & 0xFF ]; \
+ \
+ X3 = *RK++ ^ FT0[ ( Y3 ) & 0xFF ] ^ \
+ FT1[ ( Y0 >> 8 ) & 0xFF ] ^ \
+ FT2[ ( Y1 >> 16 ) & 0xFF ] ^ \
+ FT3[ ( Y2 >> 24 ) & 0xFF ]; \
+}
+
+#define AES_RROUND(X0,X1,X2,X3,Y0,Y1,Y2,Y3) \
+{ \
+ X0 = *RK++ ^ RT0[ ( Y0 ) & 0xFF ] ^ \
+ RT1[ ( Y3 >> 8 ) & 0xFF ] ^ \
+ RT2[ ( Y2 >> 16 ) & 0xFF ] ^ \
+ RT3[ ( Y1 >> 24 ) & 0xFF ]; \
+ \
+ X1 = *RK++ ^ RT0[ ( Y1 ) & 0xFF ] ^ \
+ RT1[ ( Y0 >> 8 ) & 0xFF ] ^ \
+ RT2[ ( Y3 >> 16 ) & 0xFF ] ^ \
+ RT3[ ( Y2 >> 24 ) & 0xFF ]; \
+ \
+ X2 = *RK++ ^ RT0[ ( Y2 ) & 0xFF ] ^ \
+ RT1[ ( Y1 >> 8 ) & 0xFF ] ^ \
+ RT2[ ( Y0 >> 16 ) & 0xFF ] ^ \
+ RT3[ ( Y3 >> 24 ) & 0xFF ]; \
+ \
+ X3 = *RK++ ^ RT0[ ( Y3 ) & 0xFF ] ^ \
+ RT1[ ( Y2 >> 8 ) & 0xFF ] ^ \
+ RT2[ ( Y1 >> 16 ) & 0xFF ] ^ \
+ RT3[ ( Y0 >> 24 ) & 0xFF ]; \
+}
+
+/*
+ * AES-ECB block encryption/decryption
+ */
+int aes_crypt_ecb( aes_context *ctx,
+ int mode,
+ const unsigned char input[16],
+ unsigned char output[16] )
+{
+ int i;
+ uint32_t *RK, X0, X1, X2, X3, Y0, Y1, Y2, Y3;
+
+#if defined(POLARSSL_AESNI_C) && defined(POLARSSL_HAVE_X86_64)
+ if( aesni_supports( POLARSSL_AESNI_AES ) )
+ return( aesni_crypt_ecb( ctx, mode, input, output ) );
+#endif
+
+#if defined(POLARSSL_PADLOCK_C) && defined(POLARSSL_HAVE_X86)
+ if( aes_padlock_ace )
+ {
+ if( padlock_xcryptecb( ctx, mode, input, output ) == 0 )
+ return( 0 );
+
+ // If padlock data misaligned, we just fall back to
+ // unaccelerated mode
+ //
+ }
+#endif
+
+ RK = ctx->rk;
+
+ GET_UINT32_LE( X0, input, 0 ); X0 ^= *RK++;
+ GET_UINT32_LE( X1, input, 4 ); X1 ^= *RK++;
+ GET_UINT32_LE( X2, input, 8 ); X2 ^= *RK++;
+ GET_UINT32_LE( X3, input, 12 ); X3 ^= *RK++;
+
+ if( mode == AES_DECRYPT )
+ {
+ for( i = ( ctx->nr >> 1 ) - 1; i > 0; i-- )
+ {
+ AES_RROUND( Y0, Y1, Y2, Y3, X0, X1, X2, X3 );
+ AES_RROUND( X0, X1, X2, X3, Y0, Y1, Y2, Y3 );
+ }
+
+ AES_RROUND( Y0, Y1, Y2, Y3, X0, X1, X2, X3 );
+
+ X0 = *RK++ ^ \
+ ( (uint32_t) RSb[ ( Y0 ) & 0xFF ] ) ^
+ ( (uint32_t) RSb[ ( Y3 >> 8 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) RSb[ ( Y2 >> 16 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) RSb[ ( Y1 >> 24 ) & 0xFF ] << 24 );
+
+ X1 = *RK++ ^ \
+ ( (uint32_t) RSb[ ( Y1 ) & 0xFF ] ) ^
+ ( (uint32_t) RSb[ ( Y0 >> 8 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) RSb[ ( Y3 >> 16 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) RSb[ ( Y2 >> 24 ) & 0xFF ] << 24 );
+
+ X2 = *RK++ ^ \
+ ( (uint32_t) RSb[ ( Y2 ) & 0xFF ] ) ^
+ ( (uint32_t) RSb[ ( Y1 >> 8 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) RSb[ ( Y0 >> 16 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) RSb[ ( Y3 >> 24 ) & 0xFF ] << 24 );
+
+ X3 = *RK++ ^ \
+ ( (uint32_t) RSb[ ( Y3 ) & 0xFF ] ) ^
+ ( (uint32_t) RSb[ ( Y2 >> 8 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) RSb[ ( Y1 >> 16 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) RSb[ ( Y0 >> 24 ) & 0xFF ] << 24 );
+ }
+ else /* AES_ENCRYPT */
+ {
+ for( i = ( ctx->nr >> 1 ) - 1; i > 0; i-- )
+ {
+ AES_FROUND( Y0, Y1, Y2, Y3, X0, X1, X2, X3 );
+ AES_FROUND( X0, X1, X2, X3, Y0, Y1, Y2, Y3 );
+ }
+
+ AES_FROUND( Y0, Y1, Y2, Y3, X0, X1, X2, X3 );
+
+ X0 = *RK++ ^ \
+ ( (uint32_t) FSb[ ( Y0 ) & 0xFF ] ) ^
+ ( (uint32_t) FSb[ ( Y1 >> 8 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) FSb[ ( Y2 >> 16 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) FSb[ ( Y3 >> 24 ) & 0xFF ] << 24 );
+
+ X1 = *RK++ ^ \
+ ( (uint32_t) FSb[ ( Y1 ) & 0xFF ] ) ^
+ ( (uint32_t) FSb[ ( Y2 >> 8 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) FSb[ ( Y3 >> 16 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) FSb[ ( Y0 >> 24 ) & 0xFF ] << 24 );
+
+ X2 = *RK++ ^ \
+ ( (uint32_t) FSb[ ( Y2 ) & 0xFF ] ) ^
+ ( (uint32_t) FSb[ ( Y3 >> 8 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) FSb[ ( Y0 >> 16 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) FSb[ ( Y1 >> 24 ) & 0xFF ] << 24 );
+
+ X3 = *RK++ ^ \
+ ( (uint32_t) FSb[ ( Y3 ) & 0xFF ] ) ^
+ ( (uint32_t) FSb[ ( Y0 >> 8 ) & 0xFF ] << 8 ) ^
+ ( (uint32_t) FSb[ ( Y1 >> 16 ) & 0xFF ] << 16 ) ^
+ ( (uint32_t) FSb[ ( Y2 >> 24 ) & 0xFF ] << 24 );
+ }
+
+ PUT_UINT32_LE( X0, output, 0 );
+ PUT_UINT32_LE( X1, output, 4 );
+ PUT_UINT32_LE( X2, output, 8 );
+ PUT_UINT32_LE( X3, output, 12 );
+
+ return( 0 );
+}
+
+#if defined(POLARSSL_CIPHER_MODE_CBC)
+/*
+ * AES-CBC buffer encryption/decryption
+ */
+int aes_crypt_cbc( aes_context *ctx,
+ int mode,
+ size_t length,
+ unsigned char iv[16],
+ const unsigned char *input,
+ unsigned char *output )
+{
+ int i;
+ unsigned char temp[16];
+
+ if( length % 16 )
+ return( POLARSSL_ERR_AES_INVALID_INPUT_LENGTH );
+
+#if defined(POLARSSL_PADLOCK_C) && defined(POLARSSL_HAVE_X86)
+ if( aes_padlock_ace )
+ {
+ if( padlock_xcryptcbc( ctx, mode, length, iv, input, output ) == 0 )
+ return( 0 );
+
+ // If padlock data misaligned, we just fall back to
+ // unaccelerated mode
+ //
+ }
+#endif
+
+ if( mode == AES_DECRYPT )
+ {
+ while( length > 0 )
+ {
+ memcpy( temp, input, 16 );
+ aes_crypt_ecb( ctx, mode, input, output );
+
+ for( i = 0; i < 16; i++ )
+ output[i] = (unsigned char)( output[i] ^ iv[i] );
+
+ memcpy( iv, temp, 16 );
+
+ input += 16;
+ output += 16;
+ length -= 16;
+ }
+ }
+ else
+ {
+ while( length > 0 )
+ {
+ for( i = 0; i < 16; i++ )
+ output[i] = (unsigned char)( input[i] ^ iv[i] );
+
+ aes_crypt_ecb( ctx, mode, output, output );
+ memcpy( iv, output, 16 );
+
+ input += 16;
+ output += 16;
+ length -= 16;
+ }
+ }
+
+ return( 0 );
+}
+#endif /* POLARSSL_CIPHER_MODE_CBC */
+
+#if defined(POLARSSL_CIPHER_MODE_CFB)
+/*
+ * AES-CFB128 buffer encryption/decryption
+ */
+int aes_crypt_cfb128( aes_context *ctx,
+ int mode,
+ size_t length,
+ size_t *iv_off,
+ unsigned char iv[16],
+ const unsigned char *input,
+ unsigned char *output )
+{
+ int c;
+ size_t n = *iv_off;
+
+ if( mode == AES_DECRYPT )
+ {
+ while( length-- )
+ {
+ if( n == 0 )
+ aes_crypt_ecb( ctx, AES_ENCRYPT, iv, iv );
+
+ c = *input++;
+ *output++ = (unsigned char)( c ^ iv[n] );
+ iv[n] = (unsigned char) c;
+
+ n = ( n + 1 ) & 0x0F;
+ }
+ }
+ else
+ {
+ while( length-- )
+ {
+ if( n == 0 )
+ aes_crypt_ecb( ctx, AES_ENCRYPT, iv, iv );
+
+ iv[n] = *output++ = (unsigned char)( iv[n] ^ *input++ );
+
+ n = ( n + 1 ) & 0x0F;
+ }
+ }
+
+ *iv_off = n;
+
+ return( 0 );
+}
+
+/*
+ * AES-CFB8 buffer encryption/decryption
+ */
+#include <stdio.h>
+int aes_crypt_cfb8( aes_context *ctx,
+ int mode,
+ size_t length,
+ unsigned char iv[16],
+ const unsigned char *input,
+ unsigned char *output )
+{
+ unsigned char c;
+ unsigned char ov[17];
+
+ while( length-- )
+ {
+ memcpy( ov, iv, 16 );
+ aes_crypt_ecb( ctx, AES_ENCRYPT, iv, iv );
+
+ if( mode == AES_DECRYPT )
+ ov[16] = *input;
+
+ c = *output++ = (unsigned char)( iv[0] ^ *input++ );
+
+ if( mode == AES_ENCRYPT )
+ ov[16] = c;
+
+ memcpy( iv, ov + 1, 16 );
+ }
+
+ return( 0 );
+}
+#endif /*POLARSSL_CIPHER_MODE_CFB */
+
+#if defined(POLARSSL_CIPHER_MODE_CTR)
+/*
+ * AES-CTR buffer encryption/decryption
+ */
+int aes_crypt_ctr( aes_context *ctx,
+ size_t length,
+ size_t *nc_off,
+ unsigned char nonce_counter[16],
+ unsigned char stream_block[16],
+ const unsigned char *input,
+ unsigned char *output )
+{
+ int c, i;
+ size_t n = *nc_off;
+
+ while( length-- )
+ {
+ if( n == 0 ) {
+ aes_crypt_ecb( ctx, AES_ENCRYPT, nonce_counter, stream_block );
+
+ for( i = 16; i > 0; i-- )
+ if( ++nonce_counter[i - 1] != 0 )
+ break;
+ }
+ c = *input++;
+ *output++ = (unsigned char)( c ^ stream_block[n] );
+
+ n = ( n + 1 ) & 0x0F;
+ }
+
+ *nc_off = n;
+
+ return( 0 );
+}
+#endif /* POLARSSL_CIPHER_MODE_CTR */
+
+#endif /* !POLARSSL_AES_ALT */
+
+#if defined(POLARSSL_SELF_TEST)
+
+#include <stdio.h>
+
+/*
+ * AES test vectors from:
+ *
+ * http://csrc.nist.gov/archive/aes/rijndael/rijndael-vals.zip
+ */
+static const unsigned char aes_test_ecb_dec[3][16] =
+{
+ { 0x44, 0x41, 0x6A, 0xC2, 0xD1, 0xF5, 0x3C, 0x58,
+ 0x33, 0x03, 0x91, 0x7E, 0x6B, 0xE9, 0xEB, 0xE0 },
+ { 0x48, 0xE3, 0x1E, 0x9E, 0x25, 0x67, 0x18, 0xF2,
+ 0x92, 0x29, 0x31, 0x9C, 0x19, 0xF1, 0x5B, 0xA4 },
+ { 0x05, 0x8C, 0xCF, 0xFD, 0xBB, 0xCB, 0x38, 0x2D,
+ 0x1F, 0x6F, 0x56, 0x58, 0x5D, 0x8A, 0x4A, 0xDE }
+};
+
+static const unsigned char aes_test_ecb_enc[3][16] =
+{
+ { 0xC3, 0x4C, 0x05, 0x2C, 0xC0, 0xDA, 0x8D, 0x73,
+ 0x45, 0x1A, 0xFE, 0x5F, 0x03, 0xBE, 0x29, 0x7F },
+ { 0xF3, 0xF6, 0x75, 0x2A, 0xE8, 0xD7, 0x83, 0x11,
+ 0x38, 0xF0, 0x41, 0x56, 0x06, 0x31, 0xB1, 0x14 },
+ { 0x8B, 0x79, 0xEE, 0xCC, 0x93, 0xA0, 0xEE, 0x5D,
+ 0xFF, 0x30, 0xB4, 0xEA, 0x21, 0x63, 0x6D, 0xA4 }
+};
+
+#if defined(POLARSSL_CIPHER_MODE_CBC)
+static const unsigned char aes_test_cbc_dec[3][16] =
+{
+ { 0xFA, 0xCA, 0x37, 0xE0, 0xB0, 0xC8, 0x53, 0x73,
+ 0xDF, 0x70, 0x6E, 0x73, 0xF7, 0xC9, 0xAF, 0x86 },
+ { 0x5D, 0xF6, 0x78, 0xDD, 0x17, 0xBA, 0x4E, 0x75,
+ 0xB6, 0x17, 0x68, 0xC6, 0xAD, 0xEF, 0x7C, 0x7B },
+ { 0x48, 0x04, 0xE1, 0x81, 0x8F, 0xE6, 0x29, 0x75,
+ 0x19, 0xA3, 0xE8, 0x8C, 0x57, 0x31, 0x04, 0x13 }
+};
+
+static const unsigned char aes_test_cbc_enc[3][16] =
+{
+ { 0x8A, 0x05, 0xFC, 0x5E, 0x09, 0x5A, 0xF4, 0x84,
+ 0x8A, 0x08, 0xD3, 0x28, 0xD3, 0x68, 0x8E, 0x3D },
+ { 0x7B, 0xD9, 0x66, 0xD5, 0x3A, 0xD8, 0xC1, 0xBB,
+ 0x85, 0xD2, 0xAD, 0xFA, 0xE8, 0x7B, 0xB1, 0x04 },
+ { 0xFE, 0x3C, 0x53, 0x65, 0x3E, 0x2F, 0x45, 0xB5,
+ 0x6F, 0xCD, 0x88, 0xB2, 0xCC, 0x89, 0x8F, 0xF0 }
+};
+#endif /* POLARSSL_CIPHER_MODE_CBC */
+
+#if defined(POLARSSL_CIPHER_MODE_CFB)
+/*
+ * AES-CFB128 test vectors from:
+ *
+ * http://csrc.nist.gov/publications/nistpubs/800-38a/sp800-38a.pdf
+ */
+static const unsigned char aes_test_cfb128_key[3][32] =
+{
+ { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6,
+ 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C },
+ { 0x8E, 0x73, 0xB0, 0xF7, 0xDA, 0x0E, 0x64, 0x52,
+ 0xC8, 0x10, 0xF3, 0x2B, 0x80, 0x90, 0x79, 0xE5,
+ 0x62, 0xF8, 0xEA, 0xD2, 0x52, 0x2C, 0x6B, 0x7B },
+ { 0x60, 0x3D, 0xEB, 0x10, 0x15, 0xCA, 0x71, 0xBE,
+ 0x2B, 0x73, 0xAE, 0xF0, 0x85, 0x7D, 0x77, 0x81,
+ 0x1F, 0x35, 0x2C, 0x07, 0x3B, 0x61, 0x08, 0xD7,
+ 0x2D, 0x98, 0x10, 0xA3, 0x09, 0x14, 0xDF, 0xF4 }
+};
+
+static const unsigned char aes_test_cfb128_iv[16] =
+{
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
+};
+
+static const unsigned char aes_test_cfb128_pt[64] =
+{
+ 0x6B, 0xC1, 0xBE, 0xE2, 0x2E, 0x40, 0x9F, 0x96,
+ 0xE9, 0x3D, 0x7E, 0x11, 0x73, 0x93, 0x17, 0x2A,
+ 0xAE, 0x2D, 0x8A, 0x57, 0x1E, 0x03, 0xAC, 0x9C,
+ 0x9E, 0xB7, 0x6F, 0xAC, 0x45, 0xAF, 0x8E, 0x51,
+ 0x30, 0xC8, 0x1C, 0x46, 0xA3, 0x5C, 0xE4, 0x11,
+ 0xE5, 0xFB, 0xC1, 0x19, 0x1A, 0x0A, 0x52, 0xEF,
+ 0xF6, 0x9F, 0x24, 0x45, 0xDF, 0x4F, 0x9B, 0x17,
+ 0xAD, 0x2B, 0x41, 0x7B, 0xE6, 0x6C, 0x37, 0x10
+};
+
+static const unsigned char aes_test_cfb128_ct[3][64] =
+{
+ { 0x3B, 0x3F, 0xD9, 0x2E, 0xB7, 0x2D, 0xAD, 0x20,
+ 0x33, 0x34, 0x49, 0xF8, 0xE8, 0x3C, 0xFB, 0x4A,
+ 0xC8, 0xA6, 0x45, 0x37, 0xA0, 0xB3, 0xA9, 0x3F,
+ 0xCD, 0xE3, 0xCD, 0xAD, 0x9F, 0x1C, 0xE5, 0x8B,
+ 0x26, 0x75, 0x1F, 0x67, 0xA3, 0xCB, 0xB1, 0x40,
+ 0xB1, 0x80, 0x8C, 0xF1, 0x87, 0xA4, 0xF4, 0xDF,
+ 0xC0, 0x4B, 0x05, 0x35, 0x7C, 0x5D, 0x1C, 0x0E,
+ 0xEA, 0xC4, 0xC6, 0x6F, 0x9F, 0xF7, 0xF2, 0xE6 },
+ { 0xCD, 0xC8, 0x0D, 0x6F, 0xDD, 0xF1, 0x8C, 0xAB,
+ 0x34, 0xC2, 0x59, 0x09, 0xC9, 0x9A, 0x41, 0x74,
+ 0x67, 0xCE, 0x7F, 0x7F, 0x81, 0x17, 0x36, 0x21,
+ 0x96, 0x1A, 0x2B, 0x70, 0x17, 0x1D, 0x3D, 0x7A,
+ 0x2E, 0x1E, 0x8A, 0x1D, 0xD5, 0x9B, 0x88, 0xB1,
+ 0xC8, 0xE6, 0x0F, 0xED, 0x1E, 0xFA, 0xC4, 0xC9,
+ 0xC0, 0x5F, 0x9F, 0x9C, 0xA9, 0x83, 0x4F, 0xA0,
+ 0x42, 0xAE, 0x8F, 0xBA, 0x58, 0x4B, 0x09, 0xFF },
+ { 0xDC, 0x7E, 0x84, 0xBF, 0xDA, 0x79, 0x16, 0x4B,
+ 0x7E, 0xCD, 0x84, 0x86, 0x98, 0x5D, 0x38, 0x60,
+ 0x39, 0xFF, 0xED, 0x14, 0x3B, 0x28, 0xB1, 0xC8,
+ 0x32, 0x11, 0x3C, 0x63, 0x31, 0xE5, 0x40, 0x7B,
+ 0xDF, 0x10, 0x13, 0x24, 0x15, 0xE5, 0x4B, 0x92,
+ 0xA1, 0x3E, 0xD0, 0xA8, 0x26, 0x7A, 0xE2, 0xF9,
+ 0x75, 0xA3, 0x85, 0x74, 0x1A, 0xB9, 0xCE, 0xF8,
+ 0x20, 0x31, 0x62, 0x3D, 0x55, 0xB1, 0xE4, 0x71 }
+};
+#endif /* POLARSSL_CIPHER_MODE_CFB */
+
+#if defined(POLARSSL_CIPHER_MODE_CTR)
+/*
+ * AES-CTR test vectors from:
+ *
+ * http://www.faqs.org/rfcs/rfc3686.html
+ */
+
+static const unsigned char aes_test_ctr_key[3][16] =
+{
+ { 0xAE, 0x68, 0x52, 0xF8, 0x12, 0x10, 0x67, 0xCC,
+ 0x4B, 0xF7, 0xA5, 0x76, 0x55, 0x77, 0xF3, 0x9E },
+ { 0x7E, 0x24, 0x06, 0x78, 0x17, 0xFA, 0xE0, 0xD7,
+ 0x43, 0xD6, 0xCE, 0x1F, 0x32, 0x53, 0x91, 0x63 },
+ { 0x76, 0x91, 0xBE, 0x03, 0x5E, 0x50, 0x20, 0xA8,
+ 0xAC, 0x6E, 0x61, 0x85, 0x29, 0xF9, 0xA0, 0xDC }
+};
+
+static const unsigned char aes_test_ctr_nonce_counter[3][16] =
+{
+ { 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01 },
+ { 0x00, 0x6C, 0xB6, 0xDB, 0xC0, 0x54, 0x3B, 0x59,
+ 0xDA, 0x48, 0xD9, 0x0B, 0x00, 0x00, 0x00, 0x01 },
+ { 0x00, 0xE0, 0x01, 0x7B, 0x27, 0x77, 0x7F, 0x3F,
+ 0x4A, 0x17, 0x86, 0xF0, 0x00, 0x00, 0x00, 0x01 }
+};
+
+static const unsigned char aes_test_ctr_pt[3][48] =
+{
+ { 0x53, 0x69, 0x6E, 0x67, 0x6C, 0x65, 0x20, 0x62,
+ 0x6C, 0x6F, 0x63, 0x6B, 0x20, 0x6D, 0x73, 0x67 },
+
+ { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F },
+
+ { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F,
+ 0x20, 0x21, 0x22, 0x23 }
+};
+
+static const unsigned char aes_test_ctr_ct[3][48] =
+{
+ { 0xE4, 0x09, 0x5D, 0x4F, 0xB7, 0xA7, 0xB3, 0x79,
+ 0x2D, 0x61, 0x75, 0xA3, 0x26, 0x13, 0x11, 0xB8 },
+ { 0x51, 0x04, 0xA1, 0x06, 0x16, 0x8A, 0x72, 0xD9,
+ 0x79, 0x0D, 0x41, 0xEE, 0x8E, 0xDA, 0xD3, 0x88,
+ 0xEB, 0x2E, 0x1E, 0xFC, 0x46, 0xDA, 0x57, 0xC8,
+ 0xFC, 0xE6, 0x30, 0xDF, 0x91, 0x41, 0xBE, 0x28 },
+ { 0xC1, 0xCF, 0x48, 0xA8, 0x9F, 0x2F, 0xFD, 0xD9,
+ 0xCF, 0x46, 0x52, 0xE9, 0xEF, 0xDB, 0x72, 0xD7,
+ 0x45, 0x40, 0xA4, 0x2B, 0xDE, 0x6D, 0x78, 0x36,
+ 0xD5, 0x9A, 0x5C, 0xEA, 0xAE, 0xF3, 0x10, 0x53,
+ 0x25, 0xB2, 0x07, 0x2F }
+};
+
+static const int aes_test_ctr_len[3] =
+ { 16, 32, 36 };
+#endif /* POLARSSL_CIPHER_MODE_CTR */
+
+/*
+ * Checkup routine
+ */
+int aes_self_test( int verbose )
+{
+ int ret = 0, i, j, u, v;
+ unsigned char key[32];
+ unsigned char buf[64];
+ unsigned char iv[16];
+#if defined(POLARSSL_CIPHER_MODE_CBC)
+ unsigned char prv[16];
+#endif
+#if defined(POLARSSL_CIPHER_MODE_CTR) || defined(POLARSSL_CIPHER_MODE_CFB)
+ size_t offset;
+#endif
+#if defined(POLARSSL_CIPHER_MODE_CTR)
+ int len;
+ unsigned char nonce_counter[16];
+ unsigned char stream_block[16];
+#endif
+ aes_context ctx;
+
+ memset( key, 0, 32 );
+ aes_init( &ctx );
+
+ /*
+ * ECB mode
+ */
+ for( i = 0; i < 6; i++ )
+ {
+ u = i >> 1;
+ v = i & 1;
+
+ if( verbose != 0 )
+ polarssl_printf( " AES-ECB-%3d (%s): ", 128 + u * 64,
+ ( v == AES_DECRYPT ) ? "dec" : "enc" );
+
+ memset( buf, 0, 16 );
+
+ if( v == AES_DECRYPT )
+ {
+ aes_setkey_dec( &ctx, key, 128 + u * 64 );
+
+ for( j = 0; j < 10000; j++ )
+ aes_crypt_ecb( &ctx, v, buf, buf );
+
+ if( memcmp( buf, aes_test_ecb_dec[u], 16 ) != 0 )
+ {
+ if( verbose != 0 )
+ polarssl_printf( "failed\n" );
+
+ ret = 1;
+ goto exit;
+ }
+ }
+ else
+ {
+ aes_setkey_enc( &ctx, key, 128 + u * 64 );
+
+ for( j = 0; j < 10000; j++ )
+ aes_crypt_ecb( &ctx, v, buf, buf );
+
+ if( memcmp( buf, aes_test_ecb_enc[u], 16 ) != 0 )
+ {
+ if( verbose != 0 )
+ polarssl_printf( "failed\n" );
+
+ ret = 1;
+ goto exit;
+ }
+ }
+
+ if( verbose != 0 )
+ polarssl_printf( "passed\n" );
+ }
+
+ if( verbose != 0 )
+ polarssl_printf( "\n" );
+
+#if defined(POLARSSL_CIPHER_MODE_CBC)
+ /*
+ * CBC mode
+ */
+ for( i = 0; i < 6; i++ )
+ {
+ u = i >> 1;
+ v = i & 1;
+
+ if( verbose != 0 )
+ polarssl_printf( " AES-CBC-%3d (%s): ", 128 + u * 64,
+ ( v == AES_DECRYPT ) ? "dec" : "enc" );
+
+ memset( iv , 0, 16 );
+ memset( prv, 0, 16 );
+ memset( buf, 0, 16 );
+
+ if( v == AES_DECRYPT )
+ {
+ aes_setkey_dec( &ctx, key, 128 + u * 64 );
+
+ for( j = 0; j < 10000; j++ )
+ aes_crypt_cbc( &ctx, v, 16, iv, buf, buf );
+
+ if( memcmp( buf, aes_test_cbc_dec[u], 16 ) != 0 )
+ {
+ if( verbose != 0 )
+ polarssl_printf( "failed\n" );
+
+ ret = 1;
+ goto exit;
+ }
+ }
+ else
+ {
+ aes_setkey_enc( &ctx, key, 128 + u * 64 );
+
+ for( j = 0; j < 10000; j++ )
+ {
+ unsigned char tmp[16];
+
+ aes_crypt_cbc( &ctx, v, 16, iv, buf, buf );
+
+ memcpy( tmp, prv, 16 );
+ memcpy( prv, buf, 16 );
+ memcpy( buf, tmp, 16 );
+ }
+
+ if( memcmp( prv, aes_test_cbc_enc[u], 16 ) != 0 )
+ {
+ if( verbose != 0 )
+ polarssl_printf( "failed\n" );
+
+ ret = 1;
+ goto exit;
+ }
+ }
+
+ if( verbose != 0 )
+ polarssl_printf( "passed\n" );
+ }
+
+ if( verbose != 0 )
+ polarssl_printf( "\n" );
+#endif /* POLARSSL_CIPHER_MODE_CBC */
+
+#if defined(POLARSSL_CIPHER_MODE_CFB)
+ /*
+ * CFB128 mode
+ */
+ for( i = 0; i < 6; i++ )
+ {
+ u = i >> 1;
+ v = i & 1;
+
+ if( verbose != 0 )
+ polarssl_printf( " AES-CFB128-%3d (%s): ", 128 + u * 64,
+ ( v == AES_DECRYPT ) ? "dec" : "enc" );
+
+ memcpy( iv, aes_test_cfb128_iv, 16 );
+ memcpy( key, aes_test_cfb128_key[u], 16 + u * 8 );
+
+ offset = 0;
+ aes_setkey_enc( &ctx, key, 128 + u * 64 );
+
+ if( v == AES_DECRYPT )
+ {
+ memcpy( buf, aes_test_cfb128_ct[u], 64 );
+ aes_crypt_cfb128( &ctx, v, 64, &offset, iv, buf, buf );
+
+ if( memcmp( buf, aes_test_cfb128_pt, 64 ) != 0 )
+ {
+ if( verbose != 0 )
+ polarssl_printf( "failed\n" );
+
+ ret = 1;
+ goto exit;
+ }
+ }
+ else
+ {
+ memcpy( buf, aes_test_cfb128_pt, 64 );
+ aes_crypt_cfb128( &ctx, v, 64, &offset, iv, buf, buf );
+
+ if( memcmp( buf, aes_test_cfb128_ct[u], 64 ) != 0 )
+ {
+ if( verbose != 0 )
+ polarssl_printf( "failed\n" );
+
+ ret = 1;
+ goto exit;
+ }
+ }
+
+ if( verbose != 0 )
+ polarssl_printf( "passed\n" );
+ }
+
+ if( verbose != 0 )
+ polarssl_printf( "\n" );
+#endif /* POLARSSL_CIPHER_MODE_CFB */
+
+#if defined(POLARSSL_CIPHER_MODE_CTR)
+ /*
+ * CTR mode
+ */
+ for( i = 0; i < 6; i++ )
+ {
+ u = i >> 1;
+ v = i & 1;
+
+ if( verbose != 0 )
+ polarssl_printf( " AES-CTR-128 (%s): ",
+ ( v == AES_DECRYPT ) ? "dec" : "enc" );
+
+ memcpy( nonce_counter, aes_test_ctr_nonce_counter[u], 16 );
+ memcpy( key, aes_test_ctr_key[u], 16 );
+
+ offset = 0;
+ aes_setkey_enc( &ctx, key, 128 );
+
+ if( v == AES_DECRYPT )
+ {
+ len = aes_test_ctr_len[u];
+ memcpy( buf, aes_test_ctr_ct[u], len );
+
+ aes_crypt_ctr( &ctx, len, &offset, nonce_counter, stream_block,
+ buf, buf );
+
+ if( memcmp( buf, aes_test_ctr_pt[u], len ) != 0 )
+ {
+ if( verbose != 0 )
+ polarssl_printf( "failed\n" );
+
+ ret = 1;
+ goto exit;
+ }
+ }
+ else
+ {
+ len = aes_test_ctr_len[u];
+ memcpy( buf, aes_test_ctr_pt[u], len );
+
+ aes_crypt_ctr( &ctx, len, &offset, nonce_counter, stream_block,
+ buf, buf );
+
+ if( memcmp( buf, aes_test_ctr_ct[u], len ) != 0 )
+ {
+ if( verbose != 0 )
+ polarssl_printf( "failed\n" );
+
+ ret = 1;
+ goto exit;
+ }
+ }
+
+ if( verbose != 0 )
+ polarssl_printf( "passed\n" );
+ }
+
+ if( verbose != 0 )
+ polarssl_printf( "\n" );
+#endif /* POLARSSL_CIPHER_MODE_CTR */
+
+ ret = 0;
+
+exit:
+ aes_free( &ctx );
+
+ return( ret );
+}
+
+#endif /* POLARSSL_SELF_TEST */
+
+#endif /* POLARSSL_AES_C */
--- /dev/null
+/**
+ * \file config.h
+ *
+ * \brief Configuration options (set of defines)
+ *
+ * Copyright (C) 2006-2014, Brainspark B.V.
+ *
+ * This file is part of PolarSSL (http://www.polarssl.org)
+ * Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * This set of compile-time options may be used to enable
+ * or disable features selectively, and reduce the global
+ * memory footprint.
+ */
+#ifndef POLARSSL_CONFIG_H
+#define POLARSSL_CONFIG_H
+
+#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE)
+#define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+
+/**
+ * \name SECTION: System support
+ *
+ * This section sets system specific settings.
+ * \{
+ */
+
+/**
+ * \def POLARSSL_HAVE_INT8
+ *
+ * The system uses 8-bit wide native integers.
+ *
+ * Uncomment if native integers are 8-bit wide.
+ */
+//#define POLARSSL_HAVE_INT8
+
+/**
+ * \def POLARSSL_HAVE_INT16
+ *
+ * The system uses 16-bit wide native integers.
+ *
+ * Uncomment if native integers are 16-bit wide.
+ */
+//#define POLARSSL_HAVE_INT16
+
+/**
+ * \def POLARSSL_HAVE_LONGLONG
+ *
+ * The compiler supports the 'long long' type.
+ * (Only used on 32-bit platforms)
+ */
+#define POLARSSL_HAVE_LONGLONG
+
+/**
+ * \def POLARSSL_HAVE_ASM
+ *
+ * The compiler has support for asm().
+ *
+ * Requires support for asm() in compiler.
+ *
+ * Used in:
+ * library/timing.c
+ * library/padlock.c
+ * include/polarssl/bn_mul.h
+ *
+ * Comment to disable the use of assembly code.
+ */
+#define POLARSSL_HAVE_ASM
+
+/**
+ * \def POLARSSL_HAVE_SSE2
+ *
+ * CPU supports SSE2 instruction set.
+ *
+ * Uncomment if the CPU supports SSE2 (IA-32 specific).
+ */
+//#define POLARSSL_HAVE_SSE2
+
+/**
+ * \def POLARSSL_HAVE_TIME
+ *
+ * System has time.h and time() / localtime() / gettimeofday().
+ *
+ * Comment if your system does not support time functions
+ */
+#define POLARSSL_HAVE_TIME
+
+/**
+ * \def POLARSSL_HAVE_IPV6
+ *
+ * System supports the basic socket interface for IPv6 (RFC 3493),
+ * specifically getaddrinfo(), freeaddrinfo() and struct sockaddr_storage.
+ *
+ * Note: on Windows/MingW, XP or higher is required.
+ *
+ * Comment if your system does not support the IPv6 socket interface
+ */
+#define POLARSSL_HAVE_IPV6
+
+/**
+ * \def POLARSSL_PLATFORM_MEMORY
+ *
+ * Enable the memory allocation layer.
+ *
+ * By default PolarSSL uses the system-provided malloc() and free().
+ * This allows different allocators (self-implemented or provided) to be
+ * provided to the platform abstraction layer.
+ *
+ * Enabling POLARSSL_PLATFORM_MEMORY will provide "platform_set_malloc_free()"
+ * to allow you to set an alternative malloc() and free() function pointer.
+ *
+ * Requires: POLARSSL_PLATFORM_C
+ *
+ * Enable this layer to allow use of alternative memory allocators.
+ */
+//#define POLARSSL_PLATFORM_MEMORY
+
+/**
+ * \def POLARSSL_PLATFORM_NO_STD_FUNCTIONS
+ *
+ * Do not assign standard functions in the platform layer (e.g. malloc() to
+ * POLARSSL_PLATFORM_STD_MALLOC and printf() to POLARSSL_PLATFORM_STD_PRINTF)
+ *
+ * This makes sure there are no linking errors on platforms that do not support
+ * these functions. You will HAVE to provide alternatives, either at runtime
+ * via the platform_set_xxx() functions or at compile time by setting
+ * the POLARSSL_PLATFORM_STD_XXX defines.
+ *
+ * Requires: POLARSSL_PLATFORM_C
+ *
+ * Uncomment to prevent default assignment of standard functions in the
+ * platform layer.
+ */
+//#define POLARSSL_PLATFORM_NO_STD_FUNCTIONS
+
+/**
+ * \def POLARSSL_PLATFORM_XXX_ALT
+ *
+ * Uncomment a macro to let PolarSSL support the function in the platform
+ * abstraction layer.
+ *
+ * Example: In case you uncomment POLARSSL_PLATFORM_PRINTF_ALT, PolarSSL will
+ * provide a function "platform_set_printf()" that allows you to set an
+ * alternative printf function pointer.
+ *
+ * All these define require POLARSSL_PLATFORM_C to be defined!
+ *
+ * Uncomment a macro to enable alternate implementation of specific base
+ * platform function
+ */
+//#define POLARSSL_PLATFORM_PRINTF_ALT
+//#define POLARSSL_PLATFORM_FPRINTF_ALT
+/* \} name SECTION: System support */
+
+/**
+ * \name SECTION: PolarSSL feature support
+ *
+ * This section sets support for features that are or are not needed
+ * within the modules that are enabled.
+ * \{
+ */
+
+/**
+ * \def POLARSSL_TIMING_ALT
+ *
+ * Uncomment to provide your own alternate implementation for hardclock(),
+ * get_timer(), set_alarm() and m_sleep().
+ *
+ * Only works if you have POLARSSL_TIMING_C enabled.
+ *
+ * You will need to provide a header "timing_alt.h" and an implementation at
+ * compile time.
+ */
+//#define POLARSSL_TIMING_ALT
+
+/**
+ * \def POLARSSL_XXX_ALT
+ *
+ * Uncomment a macro to let PolarSSL use your alternate core implementation of
+ * a symmetric or hash algorithm (e.g. platform specific assembly optimized
+ * implementations). Keep in mind that the function prototypes should remain
+ * the same.
+ *
+ * Example: In case you uncomment POLARSSL_AES_ALT, PolarSSL will no longer
+ * provide the "struct aes_context" definition and omit the base function
+ * declarations and implementations. "aes_alt.h" will be included from
+ * "aes.h" to include the new function definitions.
+ *
+ * Uncomment a macro to enable alternate implementation for core algorithm
+ * functions
+ */
+//#define POLARSSL_AES_ALT
+//#define POLARSSL_ARC4_ALT
+//#define POLARSSL_BLOWFISH_ALT
+//#define POLARSSL_CAMELLIA_ALT
+//#define POLARSSL_DES_ALT
+//#define POLARSSL_XTEA_ALT
+//#define POLARSSL_MD2_ALT
+//#define POLARSSL_MD4_ALT
+//#define POLARSSL_MD5_ALT
+//#define POLARSSL_RIPEMD160_ALT
+//#define POLARSSL_SHA1_ALT
+//#define POLARSSL_SHA256_ALT
+//#define POLARSSL_SHA512_ALT
+
+/**
+ * \def POLARSSL_AES_ROM_TABLES
+ *
+ * Store the AES tables in ROM.
+ *
+ * Uncomment this macro to store the AES tables in ROM.
+ *
+ */
+//#define POLARSSL_AES_ROM_TABLES
+
+/**
+ * \def POLARSSL_CIPHER_MODE_CBC
+ *
+ * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
+ */
+#define POLARSSL_CIPHER_MODE_CBC
+
+/**
+ * \def POLARSSL_CIPHER_MODE_CFB
+ *
+ * Enable Cipher Feedback mode (CFB) for symmetric ciphers.
+ */
+#define POLARSSL_CIPHER_MODE_CFB
+
+/**
+ * \def POLARSSL_CIPHER_MODE_CTR
+ *
+ * Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
+ */
+#define POLARSSL_CIPHER_MODE_CTR
+
+/**
+ * \def POLARSSL_CIPHER_NULL_CIPHER
+ *
+ * Enable NULL cipher.
+ * Warning: Only do so when you know what you are doing. This allows for
+ * encryption or channels without any security!
+ *
+ * Requires POLARSSL_ENABLE_WEAK_CIPHERSUITES as well to enable
+ * the following ciphersuites:
+ * TLS_ECDH_ECDSA_WITH_NULL_SHA
+ * TLS_ECDH_RSA_WITH_NULL_SHA
+ * TLS_ECDHE_ECDSA_WITH_NULL_SHA
+ * TLS_ECDHE_RSA_WITH_NULL_SHA
+ * TLS_ECDHE_PSK_WITH_NULL_SHA384
+ * TLS_ECDHE_PSK_WITH_NULL_SHA256
+ * TLS_ECDHE_PSK_WITH_NULL_SHA
+ * TLS_DHE_PSK_WITH_NULL_SHA384
+ * TLS_DHE_PSK_WITH_NULL_SHA256
+ * TLS_DHE_PSK_WITH_NULL_SHA
+ * TLS_RSA_WITH_NULL_SHA256
+ * TLS_RSA_WITH_NULL_SHA
+ * TLS_RSA_WITH_NULL_MD5
+ * TLS_RSA_PSK_WITH_NULL_SHA384
+ * TLS_RSA_PSK_WITH_NULL_SHA256
+ * TLS_RSA_PSK_WITH_NULL_SHA
+ * TLS_PSK_WITH_NULL_SHA384
+ * TLS_PSK_WITH_NULL_SHA256
+ * TLS_PSK_WITH_NULL_SHA
+ *
+ * Uncomment this macro to enable the NULL cipher and ciphersuites
+ */
+//#define POLARSSL_CIPHER_NULL_CIPHER
+
+/**
+ * \def POLARSSL_CIPHER_PADDING_XXX
+ *
+ * Uncomment or comment macros to add support for specific padding modes
+ * in the cipher layer with cipher modes that support padding (e.g. CBC)
+ *
+ * If you disable all padding modes, only full blocks can be used with CBC.
+ *
+ * Enable padding modes in the cipher layer.
+ */
+#define POLARSSL_CIPHER_PADDING_PKCS7
+#define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS
+#define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN
+#define POLARSSL_CIPHER_PADDING_ZEROS
+
+/**
+ * \def POLARSSL_ENABLE_WEAK_CIPHERSUITES
+ *
+ * Enable weak ciphersuites in SSL / TLS.
+ * Warning: Only do so when you know what you are doing. This allows for
+ * channels with virtually no security at all!
+ *
+ * This enables the following ciphersuites:
+ * TLS_RSA_WITH_DES_CBC_SHA
+ * TLS_DHE_RSA_WITH_DES_CBC_SHA
+ *
+ * Uncomment this macro to enable weak ciphersuites
+ */
+//#define POLARSSL_ENABLE_WEAK_CIPHERSUITES
+
+/**
+ * \def POLARSSL_REMOVE_ARC4_CIPHERSUITES
+ *
+ * Remove RC4 ciphersuites by default in SSL / TLS.
+ * This flag removes the ciphersuites based on RC4 from the default list as
+ * returned by ssl_list_ciphersuites(). However, it is still possible to
+ * enable (some of) them with ssl_set_ciphersuites() by including them
+ * explicitly.
+ *
+ * Uncomment this macro to remove RC4 ciphersuites by default.
+ */
+//#define POLARSSL_REMOVE_ARC4_CIPHERSUITES
+
+/**
+ * \def POLARSSL_ECP_XXXX_ENABLED
+ *
+ * Enables specific curves within the Elliptic Curve module.
+ * By default all supported curves are enabled.
+ *
+ * Comment macros to disable the curve and functions for it
+ */
+#define POLARSSL_ECP_DP_SECP192R1_ENABLED
+#define POLARSSL_ECP_DP_SECP224R1_ENABLED
+#define POLARSSL_ECP_DP_SECP256R1_ENABLED
+#define POLARSSL_ECP_DP_SECP384R1_ENABLED
+#define POLARSSL_ECP_DP_SECP521R1_ENABLED
+#define POLARSSL_ECP_DP_SECP192K1_ENABLED
+#define POLARSSL_ECP_DP_SECP224K1_ENABLED
+#define POLARSSL_ECP_DP_SECP256K1_ENABLED
+#define POLARSSL_ECP_DP_BP256R1_ENABLED
+#define POLARSSL_ECP_DP_BP384R1_ENABLED
+#define POLARSSL_ECP_DP_BP512R1_ENABLED
+//#define POLARSSL_ECP_DP_M221_ENABLED // Not implemented yet!
+#define POLARSSL_ECP_DP_M255_ENABLED
+//#define POLARSSL_ECP_DP_M383_ENABLED // Not implemented yet!
+//#define POLARSSL_ECP_DP_M511_ENABLED // Not implemented yet!
+
+/**
+ * \def POLARSSL_ECP_NIST_OPTIM
+ *
+ * Enable specific 'modulo p' routines for each NIST prime.
+ * Depending on the prime and architecture, makes operations 4 to 8 times
+ * faster on the corresponding curve.
+ *
+ * Comment this macro to disable NIST curves optimisation.
+ */
+#define POLARSSL_ECP_NIST_OPTIM
+
+/**
+ * \def POLARSSL_ECDSA_DETERMINISTIC
+ *
+ * Enable deterministic ECDSA (RFC 6979).
+ * Standard ECDSA is "fragile" in the sense that lack of entropy when signing
+ * may result in a compromise of the long-term signing key. This is avoided by
+ * the deterministic variant.
+ *
+ * Requires: POLARSSL_HMAC_DRBG_C
+ *
+ * Comment this macro to disable deterministic ECDSA.
+ */
+#define POLARSSL_ECDSA_DETERMINISTIC
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_PSK_ENABLED
+ *
+ * Enable the PSK based ciphersuite modes in SSL / TLS.
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_PSK_WITH_AES_256_GCM_SHA384
+ * TLS_PSK_WITH_AES_256_CBC_SHA384
+ * TLS_PSK_WITH_AES_256_CBC_SHA
+ * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_PSK_WITH_AES_128_GCM_SHA256
+ * TLS_PSK_WITH_AES_128_CBC_SHA256
+ * TLS_PSK_WITH_AES_128_CBC_SHA
+ * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_PSK_WITH_3DES_EDE_CBC_SHA
+ * TLS_PSK_WITH_RC4_128_SHA
+ */
+#define POLARSSL_KEY_EXCHANGE_PSK_ENABLED
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED
+ *
+ * Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: POLARSSL_DHM_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
+ * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
+ * TLS_DHE_PSK_WITH_AES_256_CBC_SHA
+ * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
+ * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
+ * TLS_DHE_PSK_WITH_AES_128_CBC_SHA
+ * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
+ * TLS_DHE_PSK_WITH_RC4_128_SHA
+ */
+#define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+ *
+ * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: POLARSSL_ECDH_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
+ * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
+ * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
+ * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
+ * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
+ * TLS_ECDHE_PSK_WITH_RC4_128_SHA
+ */
+#define POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED
+ *
+ * Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
+ * POLARSSL_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
+ * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
+ * TLS_RSA_PSK_WITH_AES_256_CBC_SHA
+ * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
+ * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
+ * TLS_RSA_PSK_WITH_AES_128_CBC_SHA
+ * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
+ * TLS_RSA_PSK_WITH_RC4_128_SHA
+ */
+#define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_RSA_ENABLED
+ *
+ * Enable the RSA-only based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
+ * POLARSSL_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_RSA_WITH_AES_256_GCM_SHA384
+ * TLS_RSA_WITH_AES_256_CBC_SHA256
+ * TLS_RSA_WITH_AES_256_CBC_SHA
+ * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
+ * TLS_RSA_WITH_AES_128_GCM_SHA256
+ * TLS_RSA_WITH_AES_128_CBC_SHA256
+ * TLS_RSA_WITH_AES_128_CBC_SHA
+ * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
+ * TLS_RSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_RSA_WITH_RC4_128_SHA
+ * TLS_RSA_WITH_RC4_128_MD5
+ */
+#define POLARSSL_KEY_EXCHANGE_RSA_ENABLED
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED
+ *
+ * Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: POLARSSL_DHM_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
+ * POLARSSL_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
+ * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
+ * TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
+ * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
+ * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
+ * TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
+ * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
+ */
+#define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+ *
+ * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: POLARSSL_ECDH_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
+ * POLARSSL_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
+ * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
+ * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
+ * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+ * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
+ * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
+ * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_ECDHE_RSA_WITH_RC4_128_SHA
+ */
+#define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+ *
+ * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: POLARSSL_ECDH_C, POLARSSL_ECDSA_C, POLARSSL_X509_CRT_PARSE_C,
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
+ * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
+ * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
+ * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+ * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
+ * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
+ * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
+ */
+#define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+ *
+ * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_ECDH_ECDSA_WITH_RC4_128_SHA
+ * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
+ * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
+ * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
+ * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
+ * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
+ * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
+ * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ */
+#define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
+
+/**
+ * \def POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED
+ *
+ * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
+ *
+ * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C
+ *
+ * This enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_ECDH_RSA_WITH_RC4_128_SHA
+ * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
+ * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
+ * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
+ * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
+ * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
+ * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
+ * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ */
+#define POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED
+
+/**
+ * \def POLARSSL_PK_PARSE_EC_EXTENDED
+ *
+ * Enhance support for reading EC keys using variants of SEC1 not allowed by
+ * RFC 5915 and RFC 5480.
+ *
+ * Currently this means parsing the SpecifiedECDomain choice of EC
+ * parameters (only known groups are supported, not arbitrary domains, to
+ * avoid validation issues).
+ *
+ * Disable if you only need to support RFC 5915 + 5480 key formats.
+ */
+#define POLARSSL_PK_PARSE_EC_EXTENDED
+
+/**
+ * \def POLARSSL_ERROR_STRERROR_BC
+ *
+ * Make available the backward compatible error_strerror() next to the
+ * current polarssl_strerror().
+ *
+ * For new code, it is recommended to use polarssl_strerror() instead and
+ * disable this.
+ *
+ * Disable if you run into name conflicts and want to really remove the
+ * error_strerror()
+ */
+#define POLARSSL_ERROR_STRERROR_BC
+
+/**
+ * \def POLARSSL_ERROR_STRERROR_DUMMY
+ *
+ * Enable a dummy error function to make use of polarssl_strerror() in
+ * third party libraries easier when POLARSSL_ERROR_C is disabled
+ * (no effect when POLARSSL_ERROR_C is enabled).
+ *
+ * You can safely disable this if POLARSSL_ERROR_C is enabled, or if you're
+ * not using polarssl_strerror() or error_strerror() in your application.
+ *
+ * Disable if you run into name conflicts and want to really remove the
+ * polarssl_strerror()
+ */
+#define POLARSSL_ERROR_STRERROR_DUMMY
+
+/**
+ * \def POLARSSL_GENPRIME
+ *
+ * Enable the prime-number generation code.
+ *
+ * Requires: POLARSSL_BIGNUM_C
+ */
+#define POLARSSL_GENPRIME
+
+/**
+ * \def POLARSSL_FS_IO
+ *
+ * Enable functions that use the filesystem.
+ */
+#define POLARSSL_FS_IO
+
+/**
+ * \def POLARSSL_NO_DEFAULT_ENTROPY_SOURCES
+ *
+ * Do not add default entropy sources. These are the platform specific,
+ * hardclock and HAVEGE based poll functions.
+ *
+ * This is useful to have more control over the added entropy sources in an
+ * application.
+ *
+ * Uncomment this macro to prevent loading of default entropy functions.
+ */
+//#define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES
+
+/**
+ * \def POLARSSL_NO_PLATFORM_ENTROPY
+ *
+ * Do not use built-in platform entropy functions.
+ * This is useful if your platform does not support
+ * standards like the /dev/urandom or Windows CryptoAPI.
+ *
+ * Uncomment this macro to disable the built-in platform entropy functions.
+ */
+//#define POLARSSL_NO_PLATFORM_ENTROPY
+
+/**
+ * \def POLARSSL_ENTROPY_FORCE_SHA256
+ *
+ * Force the entropy accumulator to use a SHA-256 accumulator instead of the
+ * default SHA-512 based one (if both are available).
+ *
+ * Requires: POLARSSL_SHA256_C
+ *
+ * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option
+ * if you have performance concerns.
+ *
+ * This option is only useful if both POLARSSL_SHA256_C and
+ * POLARSSL_SHA512_C are defined. Otherwise the available hash module is used.
+ */
+//#define POLARSSL_ENTROPY_FORCE_SHA256
+
+/**
+ * \def POLARSSL_MEMORY_DEBUG
+ *
+ * Enable debugging of buffer allocator memory issues. Automatically prints
+ * (to stderr) all (fatal) messages on memory allocation issues. Enables
+ * function for 'debug output' of allocated memory.
+ *
+ * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C
+ *
+ * Uncomment this macro to let the buffer allocator print out error messages.
+ */
+//#define POLARSSL_MEMORY_DEBUG
+
+/**
+ * \def POLARSSL_MEMORY_BACKTRACE
+ *
+ * Include backtrace information with each allocated block.
+ *
+ * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C
+ * GLIBC-compatible backtrace() an backtrace_symbols() support
+ *
+ * Uncomment this macro to include backtrace information
+ */
+//#define POLARSSL_MEMORY_BACKTRACE
+
+/**
+ * \def POLARSSL_PKCS1_V15
+ *
+ * Enable support for PKCS#1 v1.5 encoding.
+ *
+ * Requires: POLARSSL_RSA_C
+ *
+ * This enables support for PKCS#1 v1.5 operations.
+ */
+#define POLARSSL_PKCS1_V15
+
+/**
+ * \def POLARSSL_PKCS1_V21
+ *
+ * Enable support for PKCS#1 v2.1 encoding.
+ *
+ * Requires: POLARSSL_MD_C, POLARSSL_RSA_C
+ *
+ * This enables support for RSAES-OAEP and RSASSA-PSS operations.
+ */
+#define POLARSSL_PKCS1_V21
+
+/**
+ * \def POLARSSL_RSA_NO_CRT
+ *
+ * Do not use the Chinese Remainder Theorem for the RSA private operation.
+ *
+ * Uncomment this macro to disable the use of CRT in RSA.
+ *
+ */
+//#define POLARSSL_RSA_NO_CRT
+
+/**
+ * \def POLARSSL_SELF_TEST
+ *
+ * Enable the checkup functions (*_self_test).
+ */
+#define POLARSSL_SELF_TEST
+
+/**
+ * \def POLARSSL_SSL_ALL_ALERT_MESSAGES
+ *
+ * Enable sending of alert messages in case of encountered errors as per RFC.
+ * If you choose not to send the alert messages, PolarSSL can still communicate
+ * with other servers, only debugging of failures is harder.
+ *
+ * The advantage of not sending alert messages, is that no information is given
+ * about reasons for failures thus preventing adversaries of gaining intel.
+ *
+ * Enable sending of all alert messages
+ */
+#define POLARSSL_SSL_ALERT_MESSAGES
+
+/**
+ * \def POLARSSL_SSL_DEBUG_ALL
+ *
+ * Enable the debug messages in SSL module for all issues.
+ * Debug messages have been disabled in some places to prevent timing
+ * attacks due to (unbalanced) debugging function calls.
+ *
+ * If you need all error reporting you should enable this during debugging,
+ * but remove this for production servers that should log as well.
+ *
+ * Uncomment this macro to report all debug messages on errors introducing
+ * a timing side-channel.
+ *
+ */
+//#define POLARSSL_SSL_DEBUG_ALL
+
+/**
+ * \def POLARSSL_SSL_HW_RECORD_ACCEL
+ *
+ * Enable hooking functions in SSL module for hardware acceleration of
+ * individual records.
+ *
+ * Uncomment this macro to enable hooking functions.
+ */
+//#define POLARSSL_SSL_HW_RECORD_ACCEL
+
+/**
+ * \def POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
+ *
+ * Enable support for receiving and parsing SSLv2 Client Hello messages for the
+ * SSL Server module (POLARSSL_SSL_SRV_C).
+ *
+ * Comment this macro to disable support for SSLv2 Client Hello messages.
+ */
+#define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
+
+/**
+ * \def POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE
+ *
+ * Pick the ciphersuite according to the client's preferences rather than ours
+ * in the SSL Server module (POLARSSL_SSL_SRV_C).
+ *
+ * Uncomment this macro to respect client's ciphersuite order
+ */
+//#define POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE
+
+/**
+ * \def POLARSSL_SSL_MAX_FRAGMENT_LENGTH
+ *
+ * Enable support for RFC 6066 max_fragment_length extension in SSL.
+ *
+ * Comment this macro to disable support for the max_fragment_length extension
+ */
+#define POLARSSL_SSL_MAX_FRAGMENT_LENGTH
+
+/**
+ * \def POLARSSL_SSL_PROTO_SSL3
+ *
+ * Enable support for SSL 3.0.
+ *
+ * Requires: POLARSSL_MD5_C
+ * POLARSSL_SHA1_C
+ *
+ * Comment this macro to disable support for SSL 3.0
+ */
+#define POLARSSL_SSL_PROTO_SSL3
+
+/**
+ * \def POLARSSL_SSL_PROTO_TLS1
+ *
+ * Enable support for TLS 1.0.
+ *
+ * Requires: POLARSSL_MD5_C
+ * POLARSSL_SHA1_C
+ *
+ * Comment this macro to disable support for TLS 1.0
+ */
+#define POLARSSL_SSL_PROTO_TLS1
+
+/**
+ * \def POLARSSL_SSL_PROTO_TLS1_1
+ *
+ * Enable support for TLS 1.1.
+ *
+ * Requires: POLARSSL_MD5_C
+ * POLARSSL_SHA1_C
+ *
+ * Comment this macro to disable support for TLS 1.1
+ */
+#define POLARSSL_SSL_PROTO_TLS1_1
+
+/**
+ * \def POLARSSL_SSL_PROTO_TLS1_2
+ *
+ * Enable support for TLS 1.2.
+ *
+ * Requires: POLARSSL_SHA1_C or POLARSSL_SHA256_C or POLARSSL_SHA512_C
+ * (Depends on ciphersuites)
+ *
+ * Comment this macro to disable support for TLS 1.2
+ */
+#define POLARSSL_SSL_PROTO_TLS1_2
+
+/**
+ * \def POLARSSL_SSL_ALPN
+ *
+ * Enable support for Application Layer Protocol Negotiation.
+ * draft-ietf-tls-applayerprotoneg-05
+ *
+ * Comment this macro to disable support for ALPN.
+ */
+#define POLARSSL_SSL_ALPN
+
+/**
+ * \def POLARSSL_SSL_SESSION_TICKETS
+ *
+ * Enable support for RFC 5077 session tickets in SSL.
+ *
+ * Requires: POLARSSL_AES_C
+ * POLARSSL_SHA256_C
+ * POLARSSL_CIPHER_MODE_CBC
+ *
+ * Comment this macro to disable support for SSL session tickets
+ */
+#define POLARSSL_SSL_SESSION_TICKETS
+
+/**
+ * \def POLARSSL_SSL_SERVER_NAME_INDICATION
+ *
+ * Enable support for RFC 6066 server name indication (SNI) in SSL.
+ *
+ * Comment this macro to disable support for server name indication in SSL
+ */
+#define POLARSSL_SSL_SERVER_NAME_INDICATION
+
+/**
+ * \def POLARSSL_SSL_TRUNCATED_HMAC
+ *
+ * Enable support for RFC 6066 truncated HMAC in SSL.
+ *
+ * Comment this macro to disable support for truncated HMAC in SSL
+ */
+#define POLARSSL_SSL_TRUNCATED_HMAC
+
+/**
+ * \def POLARSSL_SSL_SET_CURVES
+ *
+ * Enable ssl_set_curves().
+ *
+ * This is disabled by default since it breaks binary compatibility with the
+ * 1.3.x line. If you choose to enable it, you will need to rebuild your
+ * application against the new header files, relinking will not be enough.
+ * It will be enabled by default, or no longer an option, in the 1.4 branch.
+ *
+ * Uncomment to make ssl_set_curves() available.
+ */
+//#define POLARSSL_SSL_SET_CURVES
+
+/**
+ * \def POLARSSL_THREADING_ALT
+ *
+ * Provide your own alternate threading implementation.
+ *
+ * Requires: POLARSSL_THREADING_C
+ *
+ * Uncomment this to allow your own alternate threading implementation.
+ */
+//#define POLARSSL_THREADING_ALT
+
+/**
+ * \def POLARSSL_THREADING_PTHREAD
+ *
+ * Enable the pthread wrapper layer for the threading layer.
+ *
+ * Requires: POLARSSL_THREADING_C
+ *
+ * Uncomment this to enable pthread mutexes.
+ */
+//#define POLARSSL_THREADING_PTHREAD
+
+/**
+ * \def POLARSSL_VERSION_FEATURES
+ *
+ * Allow run-time checking of compile-time enabled features. Thus allowing users
+ * to check at run-time if the library is for instance compiled with threading
+ * support via version_check_feature().
+ *
+ * Requires: POLARSSL_VERSION_C
+ *
+ * Comment this to disable run-time checking and save ROM space
+ */
+#define POLARSSL_VERSION_FEATURES
+
+/**
+ * \def POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3
+ *
+ * If set, the X509 parser will not break-off when parsing an X509 certificate
+ * and encountering an extension in a v1 or v2 certificate.
+ *
+ * Uncomment to prevent an error.
+ */
+//#define POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3
+
+/**
+ * \def POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
+ *
+ * If set, the X509 parser will not break-off when parsing an X509 certificate
+ * and encountering an unknown critical extension.
+ *
+ * Uncomment to prevent an error.
+ */
+//#define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
+
+/**
+ * \def POLARSSL_X509_CHECK_KEY_USAGE
+ *
+ * Enable verification of the keyUsage extension (CA and leaf certificates).
+ *
+ * Disabling this avoids problems with mis-issued and/or misused
+ * (intermediate) CA and leaf certificates.
+ *
+ * \warning Depending on your PKI use, disabling this can be a security risk!
+ *
+ * Comment to skip keyUsage checking for both CA and leaf certificates.
+ */
+#define POLARSSL_X509_CHECK_KEY_USAGE
+
+/**
+ * \def POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE
+ *
+ * Enable verification of the extendedKeyUsage extension (leaf certificates).
+ *
+ * Disabling this avoids problems with mis-issued and/or misused certificates.
+ *
+ * \warning Depending on your PKI use, disabling this can be a security risk!
+ *
+ * Comment to skip extendedKeyUsage checking for certificates.
+ */
+#define POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE
+
+/**
+ * \def POLARSSL_X509_RSASSA_PSS_SUPPORT
+ *
+ * Enable parsing and verification of X.509 certificates, CRLs and CSRS
+ * signed with RSASSA-PSS (aka PKCS#1 v2.1).
+ *
+ * Comment this macro to disallow using RSASSA-PSS in certificates.
+ */
+#define POLARSSL_X509_RSASSA_PSS_SUPPORT
+
+/**
+ * \def POLARSSL_ZLIB_SUPPORT
+ *
+ * If set, the SSL/TLS module uses ZLIB to support compression and
+ * decompression of packet data.
+ *
+ * \warning TLS-level compression MAY REDUCE SECURITY! See for example the
+ * CRIME attack. Before enabling this option, you should examine with care if
+ * CRIME or similar exploits may be a applicable to your use case.
+ *
+ * Used in: library/ssl_tls.c
+ * library/ssl_cli.c
+ * library/ssl_srv.c
+ *
+ * This feature requires zlib library and headers to be present.
+ *
+ * Uncomment to enable use of ZLIB
+ */
+//#define POLARSSL_ZLIB_SUPPORT
+/* \} name SECTION: PolarSSL feature support */
+
+/**
+ * \name SECTION: PolarSSL modules
+ *
+ * This section enables or disables entire modules in PolarSSL
+ * \{
+ */
+
+/**
+ * \def POLARSSL_AESNI_C
+ *
+ * Enable AES-NI support on x86-64.
+ *
+ * Module: library/aesni.c
+ * Caller: library/aes.c
+ *
+ * Requires: POLARSSL_HAVE_ASM
+ *
+ * This modules adds support for the AES-NI instructions on x86-64
+ */
+//#define POLARSSL_AESNI_C
+
+/**
+ * \def POLARSSL_AES_C
+ *
+ * Enable the AES block cipher.
+ *
+ * Module: library/aes.c
+ * Caller: library/ssl_tls.c
+ * library/pem.c
+ * library/ctr_drbg.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
+ * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
+ * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
+ * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
+ * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
+ * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
+ * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
+ * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
+ * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
+ * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
+ * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
+ * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
+ * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
+ * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
+ * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
+ * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
+ * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
+ * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
+ * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
+ * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
+ * TLS_DHE_RSA_WITH_AES_256_CBC_SHA
+ * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+ * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
+ * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
+ * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
+ * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
+ * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
+ * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
+ * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
+ * TLS_DHE_RSA_WITH_AES_128_CBC_SHA
+ * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
+ * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
+ * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
+ * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
+ * TLS_DHE_PSK_WITH_AES_256_CBC_SHA
+ * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
+ * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
+ * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
+ * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
+ * TLS_DHE_PSK_WITH_AES_128_CBC_SHA
+ * TLS_RSA_WITH_AES_256_GCM_SHA384
+ * TLS_RSA_WITH_AES_256_CBC_SHA256
+ * TLS_RSA_WITH_AES_256_CBC_SHA
+ * TLS_RSA_WITH_AES_128_GCM_SHA256
+ * TLS_RSA_WITH_AES_128_CBC_SHA256
+ * TLS_RSA_WITH_AES_128_CBC_SHA
+ * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
+ * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
+ * TLS_RSA_PSK_WITH_AES_256_CBC_SHA
+ * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
+ * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
+ * TLS_RSA_PSK_WITH_AES_128_CBC_SHA
+ * TLS_PSK_WITH_AES_256_GCM_SHA384
+ * TLS_PSK_WITH_AES_256_CBC_SHA384
+ * TLS_PSK_WITH_AES_256_CBC_SHA
+ * TLS_PSK_WITH_AES_128_GCM_SHA256
+ * TLS_PSK_WITH_AES_128_CBC_SHA256
+ * TLS_PSK_WITH_AES_128_CBC_SHA
+ *
+ * PEM_PARSE uses AES for decrypting encrypted keys.
+ */
+#define POLARSSL_AES_C
+
+/**
+ * \def POLARSSL_ARC4_C
+ *
+ * Enable the ARCFOUR stream cipher.
+ *
+ * Module: library/arc4.c
+ * Caller: library/ssl_tls.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_ECDH_ECDSA_WITH_RC4_128_SHA
+ * TLS_ECDH_RSA_WITH_RC4_128_SHA
+ * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
+ * TLS_ECDHE_RSA_WITH_RC4_128_SHA
+ * TLS_ECDHE_PSK_WITH_RC4_128_SHA
+ * TLS_DHE_PSK_WITH_RC4_128_SHA
+ * TLS_RSA_WITH_RC4_128_SHA
+ * TLS_RSA_WITH_RC4_128_MD5
+ * TLS_RSA_PSK_WITH_RC4_128_SHA
+ * TLS_PSK_WITH_RC4_128_SHA
+ */
+#define POLARSSL_ARC4_C
+
+/**
+ * \def POLARSSL_ASN1_PARSE_C
+ *
+ * Enable the generic ASN1 parser.
+ *
+ * Module: library/asn1.c
+ * Caller: library/x509.c
+ * library/dhm.c
+ * library/pkcs12.c
+ * library/pkcs5.c
+ * library/pkparse.c
+ */
+#define POLARSSL_ASN1_PARSE_C
+
+/**
+ * \def POLARSSL_ASN1_WRITE_C
+ *
+ * Enable the generic ASN1 writer.
+ *
+ * Module: library/asn1write.c
+ * Caller: library/ecdsa.c
+ * library/pkwrite.c
+ * library/x509_create.c
+ * library/x509write_crt.c
+ * library/x509write_csr.c
+ */
+#define POLARSSL_ASN1_WRITE_C
+
+/**
+ * \def POLARSSL_BASE64_C
+ *
+ * Enable the Base64 module.
+ *
+ * Module: library/base64.c
+ * Caller: library/pem.c
+ *
+ * This module is required for PEM support (required by X.509).
+ */
+#define POLARSSL_BASE64_C
+
+/**
+ * \def POLARSSL_BIGNUM_C
+ *
+ * Enable the multi-precision integer library.
+ *
+ * Module: library/bignum.c
+ * Caller: library/dhm.c
+ * library/ecp.c
+ * library/ecdsa.c
+ * library/rsa.c
+ * library/ssl_tls.c
+ *
+ * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support.
+ */
+#define POLARSSL_BIGNUM_C
+
+/**
+ * \def POLARSSL_BLOWFISH_C
+ *
+ * Enable the Blowfish block cipher.
+ *
+ * Module: library/blowfish.c
+ */
+#define POLARSSL_BLOWFISH_C
+
+/**
+ * \def POLARSSL_CAMELLIA_C
+ *
+ * Enable the Camellia block cipher.
+ *
+ * Module: library/camellia.c
+ * Caller: library/ssl_tls.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
+ * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
+ * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
+ * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
+ * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
+ * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
+ * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
+ * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
+ * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
+ */
+#define POLARSSL_CAMELLIA_C
+
+/**
+ * \def POLARSSL_CCM_C
+ *
+ * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher.
+ *
+ * Module: library/ccm.c
+ *
+ * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C
+ *
+ * This module enables the AES-CCM ciphersuites, if other requisites are
+ * enabled as well.
+ */
+#define POLARSSL_CCM_C
+
+/**
+ * \def POLARSSL_CERTS_C
+ *
+ * Enable the test certificates.
+ *
+ * Module: library/certs.c
+ * Caller:
+ *
+ * Requires: POLARSSL_PEM_PARSE_C
+ *
+ * This module is used for testing (ssl_client/server).
+ */
+#define POLARSSL_CERTS_C
+
+/**
+ * \def POLARSSL_CIPHER_C
+ *
+ * Enable the generic cipher layer.
+ *
+ * Module: library/cipher.c
+ * Caller: library/ssl_tls.c
+ *
+ * Uncomment to enable generic cipher wrappers.
+ */
+#define POLARSSL_CIPHER_C
+
+/**
+ * \def POLARSSL_CTR_DRBG_C
+ *
+ * Enable the CTR_DRBG AES-256-based random generator.
+ *
+ * Module: library/ctr_drbg.c
+ * Caller:
+ *
+ * Requires: POLARSSL_AES_C
+ *
+ * This module provides the CTR_DRBG AES-256 random number generator.
+ */
+#define POLARSSL_CTR_DRBG_C
+
+/**
+ * \def POLARSSL_DEBUG_C
+ *
+ * Enable the debug functions.
+ *
+ * Module: library/debug.c
+ * Caller: library/ssl_cli.c
+ * library/ssl_srv.c
+ * library/ssl_tls.c
+ *
+ * This module provides debugging functions.
+ */
+#define POLARSSL_DEBUG_C
+
+/**
+ * \def POLARSSL_DES_C
+ *
+ * Enable the DES block cipher.
+ *
+ * Module: library/des.c
+ * Caller: library/pem.c
+ * library/ssl_tls.c
+ *
+ * This module enables the following ciphersuites (if other requisites are
+ * enabled as well):
+ * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
+ * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
+ * TLS_RSA_WITH_3DES_EDE_CBC_SHA
+ * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
+ * TLS_PSK_WITH_3DES_EDE_CBC_SHA
+ *
+ * PEM_PARSE uses DES/3DES for decrypting encrypted keys.
+ */
+#define POLARSSL_DES_C
+
+/**
+ * \def POLARSSL_DHM_C
+ *
+ * Enable the Diffie-Hellman-Merkle module.
+ *
+ * Module: library/dhm.c
+ * Caller: library/ssl_cli.c
+ * library/ssl_srv.c
+ *
+ * This module is used by the following key exchanges:
+ * DHE-RSA, DHE-PSK
+ */
+#define POLARSSL_DHM_C
+
+/**
+ * \def POLARSSL_ECDH_C
+ *
+ * Enable the elliptic curve Diffie-Hellman library.
+ *
+ * Module: library/ecdh.c
+ * Caller: library/ssl_cli.c
+ * library/ssl_srv.c
+ *
+ * This module is used by the following key exchanges:
+ * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
+ *
+ * Requires: POLARSSL_ECP_C
+ */
+#define POLARSSL_ECDH_C
+
+/**
+ * \def POLARSSL_ECDSA_C
+ *
+ * Enable the elliptic curve DSA library.
+ *
+ * Module: library/ecdsa.c
+ * Caller:
+ *
+ * This module is used by the following key exchanges:
+ * ECDHE-ECDSA
+ *
+ * Requires: POLARSSL_ECP_C, POLARSSL_ASN1_WRITE_C, POLARSSL_ASN1_PARSE_C
+ */
+#define POLARSSL_ECDSA_C
+
+/**
+ * \def POLARSSL_ECP_C
+ *
+ * Enable the elliptic curve over GF(p) library.
+ *
+ * Module: library/ecp.c
+ * Caller: library/ecdh.c
+ * library/ecdsa.c
+ *
+ * Requires: POLARSSL_BIGNUM_C and at least one POLARSSL_ECP_DP_XXX_ENABLED
+ */
+#define POLARSSL_ECP_C
+
+/**
+ * \def POLARSSL_ENTROPY_C
+ *
+ * Enable the platform-specific entropy code.
+ *
+ * Module: library/entropy.c
+ * Caller:
+ *
+ * Requires: POLARSSL_SHA512_C or POLARSSL_SHA256_C
+ *
+ * This module provides a generic entropy pool
+ */
+#define POLARSSL_ENTROPY_C
+
+/**
+ * \def POLARSSL_ERROR_C
+ *
+ * Enable error code to error string conversion.
+ *
+ * Module: library/error.c
+ * Caller:
+ *
+ * This module enables polarssl_strerror().
+ */
+#define POLARSSL_ERROR_C
+
+/**
+ * \def POLARSSL_GCM_C
+ *
+ * Enable the Galois/Counter Mode (GCM) for AES.
+ *
+ * Module: library/gcm.c
+ *
+ * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C
+ *
+ * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
+ * requisites are enabled as well.
+ */
+#define POLARSSL_GCM_C
+
+/**
+ * \def POLARSSL_HAVEGE_C
+ *
+ * Enable the HAVEGE random generator.
+ *
+ * Warning: the HAVEGE random generator is not suitable for virtualized
+ * environments
+ *
+ * Warning: the HAVEGE random generator is dependent on timing and specific
+ * processor traits. It is therefore not advised to use HAVEGE as
+ * your applications primary random generator or primary entropy pool
+ * input. As a secondary input to your entropy pool, it IS able add
+ * the (limited) extra entropy it provides.
+ *
+ * Module: library/havege.c
+ * Caller:
+ *
+ * Requires: POLARSSL_TIMING_C
+ *
+ * Uncomment to enable the HAVEGE random generator.
+ */
+//#define POLARSSL_HAVEGE_C
+
+/**
+ * \def POLARSSL_HMAC_DRBG_C
+ *
+ * Enable the HMAC_DRBG random generator.
+ *
+ * Module: library/hmac_drbg.c
+ * Caller:
+ *
+ * Requires: POLARSSL_MD_C
+ *
+ * Uncomment to enable the HMAC_DRBG random number geerator.
+ */
+#define POLARSSL_HMAC_DRBG_C
+
+/**
+ * \def POLARSSL_MD_C
+ *
+ * Enable the generic message digest layer.
+ *
+ * Module: library/md.c
+ * Caller:
+ *
+ * Uncomment to enable generic message digest wrappers.
+ */
+#define POLARSSL_MD_C
+
+/**
+ * \def POLARSSL_MD2_C
+ *
+ * Enable the MD2 hash algorithm.
+ *
+ * Module: library/md2.c
+ * Caller:
+ *
+ * Uncomment to enable support for (rare) MD2-signed X.509 certs.
+ */
+//#define POLARSSL_MD2_C
+
+/**
+ * \def POLARSSL_MD4_C
+ *
+ * Enable the MD4 hash algorithm.
+ *
+ * Module: library/md4.c
+ * Caller:
+ *
+ * Uncomment to enable support for (rare) MD4-signed X.509 certs.
+ */
+//#define POLARSSL_MD4_C
+
+/**
+ * \def POLARSSL_MD5_C
+ *
+ * Enable the MD5 hash algorithm.
+ *
+ * Module: library/md5.c
+ * Caller: library/md.c
+ * library/pem.c
+ * library/ssl_tls.c
+ *
+ * This module is required for SSL/TLS and X.509.
+ * PEM_PARSE uses MD5 for decrypting encrypted keys.
+ */
+#define POLARSSL_MD5_C
+
+/**
+ * \def POLARSSL_MEMORY_C
+ * Deprecated since 1.3.5. Please use POLARSSL_PLATFORM_MEMORY instead.
+ */
+//#define POLARSSL_MEMORY_C
+
+/**
+ * \def POLARSSL_MEMORY_BUFFER_ALLOC_C
+ *
+ * Enable the buffer allocator implementation that makes use of a (stack)
+ * based buffer to 'allocate' dynamic memory. (replaces malloc() and free()
+ * calls)
+ *
+ * Module: library/memory_buffer_alloc.c
+ *
+ * Requires: POLARSSL_PLATFORM_C
+ * POLARSSL_PLATFORM_MEMORY (to use it within PolarSSL)
+ *
+ * Enable this module to enable the buffer memory allocator.
+ */
+//#define POLARSSL_MEMORY_BUFFER_ALLOC_C
+
+/**
+ * \def POLARSSL_NET_C
+ *
+ * Enable the TCP/IP networking routines.
+ *
+ * Module: library/net.c
+ *
+ * This module provides TCP/IP networking routines.
+ */
+#define POLARSSL_NET_C
+
+/**
+ * \def POLARSSL_OID_C
+ *
+ * Enable the OID database.
+ *
+ * Module: library/oid.c
+ * Caller: library/asn1write.c
+ * library/pkcs5.c
+ * library/pkparse.c
+ * library/pkwrite.c
+ * library/rsa.c
+ * library/x509.c
+ * library/x509_create.c
+ * library/x509_crl.c
+ * library/x509_crt.c
+ * library/x509_csr.c
+ * library/x509write_crt.c
+ * library/x509write_csr.c
+ *
+ * This modules translates between OIDs and internal values.
+ */
+#define POLARSSL_OID_C
+
+/**
+ * \def POLARSSL_PADLOCK_C
+ *
+ * Enable VIA Padlock support on x86.
+ *
+ * Module: library/padlock.c
+ * Caller: library/aes.c
+ *
+ * Requires: POLARSSL_HAVE_ASM
+ *
+ * This modules adds support for the VIA PadLock on x86.
+ */
+//#define POLARSSL_PADLOCK_C
+
+/**
+ * \def POLARSSL_PBKDF2_C
+ *
+ * Enable PKCS#5 PBKDF2 key derivation function.
+ * DEPRECATED: Use POLARSSL_PKCS5_C instead
+ *
+ * Module: library/pbkdf2.c
+ *
+ * Requires: POLARSSL_PKCS5_C
+ *
+ * This module adds support for the PKCS#5 PBKDF2 key derivation function.
+ */
+#define POLARSSL_PBKDF2_C
+
+/**
+ * \def POLARSSL_PEM_PARSE_C
+ *
+ * Enable PEM decoding / parsing.
+ *
+ * Module: library/pem.c
+ * Caller: library/dhm.c
+ * library/pkparse.c
+ * library/x509_crl.c
+ * library/x509_crt.c
+ * library/x509_csr.c
+ *
+ * Requires: POLARSSL_BASE64_C
+ *
+ * This modules adds support for decoding / parsing PEM files.
+ */
+#define POLARSSL_PEM_PARSE_C
+
+/**
+ * \def POLARSSL_PEM_WRITE_C
+ *
+ * Enable PEM encoding / writing.
+ *
+ * Module: library/pem.c
+ * Caller: library/pkwrite.c
+ * library/x509write_crt.c
+ * library/x509write_csr.c
+ *
+ * Requires: POLARSSL_BASE64_C
+ *
+ * This modules adds support for encoding / writing PEM files.
+ */
+#define POLARSSL_PEM_WRITE_C
+
+/**
+ * \def POLARSSL_PK_C
+ *
+ * Enable the generic public (asymetric) key layer.
+ *
+ * Module: library/pk.c
+ * Caller: library/ssl_tls.c
+ * library/ssl_cli.c
+ * library/ssl_srv.c
+ *
+ * Requires: POLARSSL_RSA_C or POLARSSL_ECP_C
+ *
+ * Uncomment to enable generic public key wrappers.
+ */
+#define POLARSSL_PK_C
+
+/**
+ * \def POLARSSL_PK_PARSE_C
+ *
+ * Enable the generic public (asymetric) key parser.
+ *
+ * Module: library/pkparse.c
+ * Caller: library/x509_crt.c
+ * library/x509_csr.c
+ *
+ * Requires: POLARSSL_PK_C
+ *
+ * Uncomment to enable generic public key parse functions.
+ */
+#define POLARSSL_PK_PARSE_C
+
+/**
+ * \def POLARSSL_PK_WRITE_C
+ *
+ * Enable the generic public (asymetric) key writer.
+ *
+ * Module: library/pkwrite.c
+ * Caller: library/x509write.c
+ *
+ * Requires: POLARSSL_PK_C
+ *
+ * Uncomment to enable generic public key write functions.
+ */
+#define POLARSSL_PK_WRITE_C
+
+/**
+ * \def POLARSSL_PKCS5_C
+ *
+ * Enable PKCS#5 functions.
+ *
+ * Module: library/pkcs5.c
+ *
+ * Requires: POLARSSL_MD_C
+ *
+ * This module adds support for the PKCS#5 functions.
+ */
+#define POLARSSL_PKCS5_C
+
+/**
+ * \def POLARSSL_PKCS11_C
+ *
+ * Enable wrapper for PKCS#11 smartcard support.
+ *
+ * Module: library/pkcs11.c
+ * Caller: library/pk.c
+ *
+ * Requires: POLARSSL_PK_C
+ *
+ * This module enables SSL/TLS PKCS #11 smartcard support.
+ * Requires the presence of the PKCS#11 helper library (libpkcs11-helper)
+ */
+//#define POLARSSL_PKCS11_C
+
+/**
+ * \def POLARSSL_PKCS12_C
+ *
+ * Enable PKCS#12 PBE functions.
+ * Adds algorithms for parsing PKCS#8 encrypted private keys
+ *
+ * Module: library/pkcs12.c
+ * Caller: library/pkparse.c
+ *
+ * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_CIPHER_C, POLARSSL_MD_C
+ * Can use: POLARSSL_ARC4_C
+ *
+ * This module enables PKCS#12 functions.
+ */
+#define POLARSSL_PKCS12_C
+
+/**
+ * \def POLARSSL_PLATFORM_C
+ *
+ * Enable the platform abstraction layer that allows you to re-assign
+ * functions like malloc(), free(), printf(), fprintf()
+ *
+ * Module: library/platform.c
+ * Caller: Most other .c files
+ *
+ * This module enables abstraction of common (libc) functions.
+ */
+//#define POLARSSL_PLATFORM_C
+
+/**
+ * \def POLARSSL_RIPEMD160_C
+ *
+ * Enable the RIPEMD-160 hash algorithm.
+ *
+ * Module: library/ripemd160.c
+ * Caller: library/md.c
+ *
+ */
+#define POLARSSL_RIPEMD160_C
+
+/**
+ * \def POLARSSL_RSA_C
+ *
+ * Enable the RSA public-key cryptosystem.
+ *
+ * Module: library/rsa.c
+ * Caller: library/ssl_cli.c
+ * library/ssl_srv.c
+ * library/ssl_tls.c
+ * library/x509.c
+ *
+ * This module is used by the following key exchanges:
+ * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
+ *
+ * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C
+ */
+#define POLARSSL_RSA_C
+
+/**
+ * \def POLARSSL_SHA1_C
+ *
+ * Enable the SHA1 cryptographic hash algorithm.
+ *
+ * Module: library/sha1.c
+ * Caller: library/md.c
+ * library/ssl_cli.c
+ * library/ssl_srv.c
+ * library/ssl_tls.c
+ * library/x509write_crt.c
+ *
+ * This module is required for SSL/TLS and SHA1-signed certificates.
+ */
+#define POLARSSL_SHA1_C
+
+/**
+ * \def POLARSSL_SHA256_C
+ *
+ * Enable the SHA-224 and SHA-256 cryptographic hash algorithms.
+ * (Used to be POLARSSL_SHA2_C)
+ *
+ * Module: library/sha256.c
+ * Caller: library/entropy.c
+ * library/md.c
+ * library/ssl_cli.c
+ * library/ssl_srv.c
+ * library/ssl_tls.c
+ *
+ * This module adds support for SHA-224 and SHA-256.
+ * This module is required for the SSL/TLS 1.2 PRF function.
+ */
+#define POLARSSL_SHA256_C
+
+/**
+ * \def POLARSSL_SHA512_C
+ *
+ * Enable the SHA-384 and SHA-512 cryptographic hash algorithms.
+ * (Used to be POLARSSL_SHA4_C)
+ *
+ * Module: library/sha512.c
+ * Caller: library/entropy.c
+ * library/md.c
+ * library/ssl_cli.c
+ * library/ssl_srv.c
+ *
+ * This module adds support for SHA-384 and SHA-512.
+ */
+#define POLARSSL_SHA512_C
+
+/**
+ * \def POLARSSL_SSL_CACHE_C
+ *
+ * Enable simple SSL cache implementation.
+ *
+ * Module: library/ssl_cache.c
+ * Caller:
+ *
+ * Requires: POLARSSL_SSL_CACHE_C
+ */
+#define POLARSSL_SSL_CACHE_C
+
+/**
+ * \def POLARSSL_SSL_CLI_C
+ *
+ * Enable the SSL/TLS client code.
+ *
+ * Module: library/ssl_cli.c
+ * Caller:
+ *
+ * Requires: POLARSSL_SSL_TLS_C
+ *
+ * This module is required for SSL/TLS client support.
+ */
+#define POLARSSL_SSL_CLI_C
+
+/**
+ * \def POLARSSL_SSL_SRV_C
+ *
+ * Enable the SSL/TLS server code.
+ *
+ * Module: library/ssl_srv.c
+ * Caller:
+ *
+ * Requires: POLARSSL_SSL_TLS_C
+ *
+ * This module is required for SSL/TLS server support.
+ */
+#define POLARSSL_SSL_SRV_C
+
+/**
+ * \def POLARSSL_SSL_TLS_C
+ *
+ * Enable the generic SSL/TLS code.
+ *
+ * Module: library/ssl_tls.c
+ * Caller: library/ssl_cli.c
+ * library/ssl_srv.c
+ *
+ * Requires: POLARSSL_CIPHER_C, POLARSSL_MD_C
+ * and at least one of the POLARSSL_SSL_PROTO_* defines
+ *
+ * This module is required for SSL/TLS.
+ */
+#define POLARSSL_SSL_TLS_C
+
+/**
+ * \def POLARSSL_THREADING_C
+ *
+ * Enable the threading abstraction layer.
+ * By default PolarSSL assumes it is used in a non-threaded environment or that
+ * contexts are not shared between threads. If you do intend to use contexts
+ * between threads, you will need to enable this layer to prevent race
+ * conditions.
+ *
+ * Module: library/threading.c
+ *
+ * This allows different threading implementations (self-implemented or
+ * provided).
+ *
+ * You will have to enable either POLARSSL_THREADING_ALT or
+ * POLARSSL_THREADING_PTHREAD.
+ *
+ * Enable this layer to allow use of mutexes within PolarSSL
+ */
+//#define POLARSSL_THREADING_C
+
+/**
+ * \def POLARSSL_TIMING_C
+ *
+ * Enable the portable timing interface.
+ *
+ * Module: library/timing.c
+ * Caller: library/havege.c
+ *
+ * This module is used by the HAVEGE random number generator.
+ */
+#define POLARSSL_TIMING_C
+
+/**
+ * \def POLARSSL_VERSION_C
+ *
+ * Enable run-time version information.
+ *
+ * Module: library/version.c
+ *
+ * This module provides run-time version information.
+ */
+#define POLARSSL_VERSION_C
+
+/**
+ * \def POLARSSL_X509_USE_C
+ *
+ * Enable X.509 core for using certificates.
+ *
+ * Module: library/x509.c
+ * Caller: library/x509_crl.c
+ * library/x509_crt.c
+ * library/x509_csr.c
+ *
+ * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_BIGNUM_C, POLARSSL_OID_C,
+ * POLARSSL_PK_PARSE_C
+ *
+ * This module is required for the X.509 parsing modules.
+ */
+#define POLARSSL_X509_USE_C
+
+/**
+ * \def POLARSSL_X509_CRT_PARSE_C
+ *
+ * Enable X.509 certificate parsing.
+ *
+ * Module: library/x509_crt.c
+ * Caller: library/ssl_cli.c
+ * library/ssl_srv.c
+ * library/ssl_tls.c
+ *
+ * Requires: POLARSSL_X509_USE_C
+ *
+ * This module is required for X.509 certificate parsing.
+ */
+#define POLARSSL_X509_CRT_PARSE_C
+
+/**
+ * \def POLARSSL_X509_CRL_PARSE_C
+ *
+ * Enable X.509 CRL parsing.
+ *
+ * Module: library/x509_crl.c
+ * Caller: library/x509_crt.c
+ *
+ * Requires: POLARSSL_X509_USE_C
+ *
+ * This module is required for X.509 CRL parsing.
+ */
+#define POLARSSL_X509_CRL_PARSE_C
+
+/**
+ * \def POLARSSL_X509_CSR_PARSE_C
+ *
+ * Enable X.509 Certificate Signing Request (CSR) parsing.
+ *
+ * Module: library/x509_csr.c
+ * Caller: library/x509_crt_write.c
+ *
+ * Requires: POLARSSL_X509_USE_C
+ *
+ * This module is used for reading X.509 certificate request.
+ */
+#define POLARSSL_X509_CSR_PARSE_C
+
+/**
+ * \def POLARSSL_X509_CREATE_C
+ *
+ * Enable X.509 core for creating certificates.
+ *
+ * Module: library/x509_create.c
+ *
+ * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C, POLARSSL_PK_WRITE_C
+ *
+ * This module is the basis for creating X.509 certificates and CSRs.
+ */
+#define POLARSSL_X509_CREATE_C
+
+/**
+ * \def POLARSSL_X509_CRT_WRITE_C
+ *
+ * Enable creating X.509 certificates.
+ *
+ * Module: library/x509_crt_write.c
+ *
+ * Requires: POLARSSL_CREATE_C
+ *
+ * This module is required for X.509 certificate creation.
+ */
+#define POLARSSL_X509_CRT_WRITE_C
+
+/**
+ * \def POLARSSL_X509_CSR_WRITE_C
+ *
+ * Enable creating X.509 Certificate Signing Requests (CSR).
+ *
+ * Module: library/x509_csr_write.c
+ *
+ * Requires: POLARSSL_CREATE_C
+ *
+ * This module is required for X.509 certificate request writing.
+ */
+#define POLARSSL_X509_CSR_WRITE_C
+
+/**
+ * \def POLARSSL_XTEA_C
+ *
+ * Enable the XTEA block cipher.
+ *
+ * Module: library/xtea.c
+ * Caller:
+ */
+#define POLARSSL_XTEA_C
+
+/* \} name SECTION: PolarSSL modules */
+
+/**
+ * \name SECTION: Module configuration options
+ *
+ * This section allows for the setting of module specific sizes and
+ * configuration options. The default values are already present in the
+ * relevant header files and should suffice for the regular use cases.
+ *
+ * Our advice is to enable options and change their values here
+ * only if you have a good reason and know the consequences.
+ *
+ * Please check the respective header file for documentation on these
+ * parameters (to prevent duplicate documentation).
+ * \{
+ */
+
+/* MPI / BIGNUM options */
+//#define POLARSSL_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */
+//#define POLARSSL_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */
+
+/* CTR_DRBG options */
+//#define CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
+//#define CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
+//#define CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
+//#define CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
+//#define CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
+
+/* HMAC_DRBG options */
+//#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
+//#define POLARSSL_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
+//#define POLARSSL_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
+//#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
+
+/* ECP options */
+//#define POLARSSL_ECP_MAX_BITS 521 /**< Maximum bit size of groups */
+//#define POLARSSL_ECP_WINDOW_SIZE 6 /**< Maximum window size used */
+//#define POLARSSL_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */
+
+/* Entropy options */
+//#define ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */
+//#define ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */
+
+/* Memory buffer allocator options */
+//#define POLARSSL_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */
+
+/* Platform options */
+//#define POLARSSL_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if POLARSSL_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */
+//#define POLARSSL_PLATFORM_STD_MALLOC malloc /**< Default allocator to use, can be undefined */
+//#define POLARSSL_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */
+//#define POLARSSL_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */
+//#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */
+
+/* SSL Cache options */
+//#define SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */
+//#define SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */
+
+/* SSL options */
+//#define SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */
+//#define SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */
+//#define POLARSSL_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */
+
+/**
+ * Complete list of ciphersuites to use, in order of preference.
+ *
+ * \warning No dependency checking is done on that field! This option can only
+ * be used to restrict the set of available ciphersuites. It is your
+ * responsibility to make sure the needed modules are active.
+ *
+ * Use this to save a few hundred bytes of ROM (default ordering of all
+ * available ciphersuites) and a few to a few hundred bytes of RAM.
+ *
+ * The value below is only an example, not the default.
+ */
+//#define SSL_CIPHERSUITES TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
+
+/* Debug options */
+//#define POLARSSL_DEBUG_DFL_MODE POLARSSL_DEBUG_LOG_FULL /**< Default log: Full or Raw */
+
+/* \} name SECTION: Module configuration options */
+
+
+#endif /* POLARSSL_CONFIG_H */
projects / proxmark3-svn / commitdiff