All notable changes to this project will be documented in this file.
This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log...
-## [unreleased][unreleased]
+## [unreleased][unreleased]
+ - hf mf dump - added retry loops to try each read attempt up to 3 times. makes getting a complete dump easier with many antennas. (marshmellow)
+
+ - Added markers in the graph around found Sequence Terminator after askmandemod. (marshmellow)
+ - Added data mtrim <start> <stop> command to trim out samples between start and stop. (marshmellow)
+ - Added data setgraphmarkers <orange> <blue> command to set two extra markers on the graph (marshmellow)
- added json support in lua (vitorio)
- added a buspirate settings file for at91sam7s512 (adamlaurie)
- `lf read` timeouts is now depended on what threshold level you set in `lf config` (marshmellow)
int clk = 0;
int maxErr = 100;
int maxLen = 0;
+ uint8_t askamp = 0;
char amp = param_getchar(Cmd, 0);
uint8_t BitStream[MAX_GRAPH_TRACE_LEN] = {0};
sscanf(Cmd, "%i %i %i %i %c", &clk, &invert, &maxErr, &maxLen, &);
askAmp(BitStream, BitLen);
bool st = false;
- if (*stCheck) st = DetectST(BitStream, &BitLen, &foundclk);
+ size_t ststart = 0, stend = 0;
+ if (*stCheck) st = DetectST_ext(BitStream, &BitLen, &foundclk, &ststart, &stend);
if (st) {
*stCheck = st;
clk = (clk == 0) ? foundclk : clk;
- if (verbose || g_debugMode) PrintAndLog("\nFound Sequence Terminator");
+ CursorCPos = ststart;
+ CursorDPos = stend;
+ if (verbose || g_debugMode) PrintAndLog("\nFound Sequence Terminator - First one is shown by orange and blue graph markers");
}
-
- int errCnt = askdemod(BitStream, &BitLen, &clk, &invert, maxErr, 0, askType);
+ int errCnt = askdemod(BitStream, &BitLen, &clk, &invert, maxErr, askamp, askType);
if (errCnt<0 || BitLen<16){ //if fatal error (or -1)
if (g_debugMode) PrintAndLog("DEBUG: no data found %d, errors:%d, bitlen:%d, clock:%d",errCnt,invert,BitLen,clk);
return 0;
RepaintGraphWindow();
}
+int CmdSetGraphMarkers(const char *Cmd) {
+ sscanf(Cmd, "%i %i", &CursorCPos, &CursorDPos);
+ RepaintGraphWindow();
+ return 0;
+}
int CmdHexsamples(const char *Cmd)
{
return 0;
}
+// trim graph (middle) piece
+int CmdMtrim(const char *Cmd) {
+ int start = 0, stop = 0;
+ sscanf(Cmd, "%i %i", &start, &stop);
+
+ if (start > GraphTraceLen || stop > GraphTraceLen || start > stop) return 0;
+ start++; //leave start position sample
+
+ GraphTraceLen -= stop - start;
+ for (int i = 0; i < GraphTraceLen; i++) {
+ GraphBuffer[start+i] = GraphBuffer[stop+i];
+ }
+ return 0;
+}
+
+
int CmdNorm(const char *Cmd)
{
int i;
{"load", CmdLoad, 1, "<filename> -- Load trace (to graph window"},
{"ltrim", CmdLtrim, 1, "<samples> -- Trim samples from left of trace"},
{"rtrim", CmdRtrim, 1, "<location to end trace> -- Trim samples from right of trace"},
+ {"mtrim", CmdMtrim, 1, "<start> <stop> -- Trim out samples from the specified start to the specified stop"},
{"manrawdecode", Cmdmandecoderaw, 1, "[invert] [maxErr] -- Manchester decode binary stream in DemodBuffer"},
{"norm", CmdNorm, 1, "Normalize max/min to +/-128"},
{"plot", CmdPlot, 1, "Show graph window (hit 'h' in window for keystroke help)"},
{"rawdemod", CmdRawDemod, 1, "[modulation] ... <options> -see help (h option) -- Demodulate the data in the GraphBuffer and output binary"},
{"samples", CmdSamples, 0, "[512 - 40000] -- Get raw samples for graph window (GraphBuffer)"},
{"save", CmdSave, 1, "<filename> -- Save trace (from graph window)"},
+ {"setgraphmarkers", CmdSetGraphMarkers, 1, "[orange_marker] [blue_marker] (in graph window)"},
{"scale", CmdScale, 1, "<int> -- Set cursor display scale"},
{"setdebugmode", CmdSetDebugMode, 1, "<0|1|2> -- Turn on or off Debugging Level for lf demods"},
{"shiftgraphzero", CmdGraphShiftZero, 1, "<shift> -- Shift 0 for Graphed wave + or - shift value"},
PrintAndLog("|-----------------------------------------|");\r
PrintAndLog("|------ Reading sector access bits...-----|");\r
PrintAndLog("|-----------------------------------------|");\r
- \r
+ uint8_t tries = 0;\r
for (sectorNo = 0; sectorNo < numSectors; sectorNo++) {\r
+ for (tries = 0; tries < 3; tries++) { \r
UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + NumBlocksPerSector(sectorNo) - 1, 0, 0}};\r
memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
clearCommandBuffer();\r
rights[sectorNo][1] = ((data[7] & 0x20)>>3) | ((data[8] & 0x2)<<0) | ((data[8] & 0x20)>>5); // C1C2C3 for data area 1\r
rights[sectorNo][2] = ((data[7] & 0x40)>>4) | ((data[8] & 0x4)>>1) | ((data[8] & 0x40)>>6); // C1C2C3 for data area 2\r
rights[sectorNo][3] = ((data[7] & 0x80)>>5) | ((data[8] & 0x8)>>2) | ((data[8] & 0x80)>>7); // C1C2C3 for sector trailer\r
- } else {\r
+ break;\r
+ } else if (tries == 2) { // on last try set defaults\r
PrintAndLog("Could not get access rights for sector %2d. Trying with defaults...", sectorNo);\r
rights[sectorNo][0] = rights[sectorNo][1] = rights[sectorNo][2] = 0x00;\r
rights[sectorNo][3] = 0x01;\r
rights[sectorNo][3] = 0x01;\r
}\r
}\r
+ }\r
\r
PrintAndLog("|-----------------------------------------|");\r
PrintAndLog("|----- Dumping all blocks to file... -----|");\r
for (sectorNo = 0; isOK && sectorNo < numSectors; sectorNo++) {\r
for (blockNo = 0; isOK && blockNo < NumBlocksPerSector(sectorNo); blockNo++) {\r
bool received = false;\r
- \r
+ for (tries = 0; tries < 3; tries++) { \r
if (blockNo == NumBlocksPerSector(sectorNo) - 1) { // sector trailer. At least the Access Conditions can always be read with key A. \r
UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
} else if (rights[sectorNo][data_area] == 0x07) { // no key would work\r
isOK = false;\r
PrintAndLog("Access rights do not allow reading of sector %2d block %3d", sectorNo, blockNo);\r
+ tries = 2;\r
} else { // key A would work\r
UsbCommand c = {CMD_MIFARE_READBL, {FirstBlockOfSector(sectorNo) + blockNo, 0, 0}};\r
memcpy(c.d.asBytes, keyA[sectorNo], 6);\r
clearCommandBuffer();\r
SendCommand(&c);\r
received = WaitForResponseTimeout(CMD_ACK,&resp,1500);\r
+ }\r
+ }\r
+ if (received) {\r
+ isOK = resp.arg[0] & 0xff;\r
+ if (isOK) break;\r
}\r
}\r
\r
uint16_t numblocks = FirstBlockOfSector(numSectors - 1) + NumBlocksPerSector(numSectors - 1);\r
fwrite(carddata, 1, 16*numblocks, fout);\r
fclose(fout);\r
- fout = NULL; \r
PrintAndLog("Dumped %d blocks (%d bytes) to file dumpdata.bin", numblocks, 16*numblocks);\r
}\r
\r
}
setDemodBuf(DemodBuffer, 128, ans);
+ setGrid_Clock(32);
// remove marker bits (1's every 9th digit after preamble) (pType = 2)
size = removeParity(DemodBuffer, 11, 9, 2, 117);
if ( size != 104 ) {
raw[2] = bytebits_to_byte(DemodBuffer+idx+32,32);
raw[3] = bytebits_to_byte(DemodBuffer+idx,32);
setDemodBuf(DemodBuffer,128,idx);
-
+ setGrid_Clock(64);
+
uint8_t firstParity = GetParity( DemodBuffer, EVEN, 63);
if ( firstParity != DemodBuffer[63] ) {
PrintAndLog("DEBUG: Error - Nedap 1st 64bit parity check failed: %d|%d ", DemodBuffer[63], firstParity);
return 0;
}
setDemodBuf(DemodBuffer, 96, ans);
+ setGrid_Clock(32);
//got a good demod
uint32_t raw1 = bytebits_to_byte(DemodBuffer, 32);
return 0;
}
setDemodBuf(DemodBuffer, 128, ans);
+ setGrid_Clock(32);
//got a good demod
uint32_t raw1 = bytebits_to_byte(DemodBuffer, 32);
extern int GraphBuffer[MAX_GRAPH_TRACE_LEN];
extern int GraphTraceLen;
extern double CursorScaleFactor;
-extern int PlotGridX, PlotGridY, PlotGridXdefault, PlotGridYdefault;
+extern int PlotGridX, PlotGridY, PlotGridXdefault, PlotGridYdefault, CursorCPos, CursorDPos;
extern int CommandFinished;
extern int offline;
void ProxWidget::paintEvent(QPaintEvent *event)
{
QPainter painter(this);
- QPainterPath penPath, whitePath, greyPath, lightgreyPath, cursorAPath, cursorBPath;
+ QPainterPath penPath, whitePath, greyPath, lightgreyPath, cursorAPath, cursorBPath, cursorCPath, cursorDPath;
QRect r;
QBrush brush(QColor(100, 255, 100));
QPen pen(QColor(100, 255, 100));
if(CursorBPos > GraphTraceLen)
CursorBPos= 0;
+ if(CursorCPos > GraphTraceLen)
+ CursorCPos= 0;
+ if(CursorDPos > GraphTraceLen)
+ CursorDPos= 0;
r = rect();
penPath.moveTo(x,y);
}
- if(i == CursorAPos || i == CursorBPos) {
+ if(i == CursorAPos || i == CursorBPos || i == CursorCPos || i == CursorDPos) {
QPainterPath *cursorPath;
- if(i == CursorAPos)
+ if (i == CursorAPos)
cursorPath = &cursorAPath;
- else
+ else if (i == CursorBPos)
cursorPath = &cursorBPath;
+ else if (i == CursorCPos)
+ cursorPath = &cursorCPath;
+ else
+ cursorPath = &cursorDPath;
cursorPath->moveTo(x, r.top());
cursorPath->lineTo(x, r.bottom());
painter.drawPath(cursorAPath);
painter.setPen(QColor(255, 0, 255));
painter.drawPath(cursorBPath);
+ painter.setPen(QColor(255, 153, 0)); //orange
+ painter.drawPath(cursorCPath);
+ painter.setPen(QColor(0, 0, 205)); //light blue
+ painter.drawPath(cursorDPath);
char str[200];
sprintf(str, "@%d max=%d min=%d mean=%d n=%d/%d dt=%d [%.3f] zoom=%.3f CursorA=%d [%d] CursorB=%d [%d] GridX=%d GridY=%d (%s)",
#include "ui.h"
double CursorScaleFactor;
-int PlotGridX, PlotGridY, PlotGridXdefault= 64, PlotGridYdefault= 64;
+int PlotGridX, PlotGridY, PlotGridXdefault= 64, PlotGridYdefault= 64, CursorCPos= 0, CursorDPos= 0;
int offline;
int flushAfterWrite = 0;
extern pthread_mutex_t print_lock;
void SetLogFilename(char *fn);
extern double CursorScaleFactor;
-extern int PlotGridX, PlotGridY, PlotGridXdefault, PlotGridYdefault;
+extern int PlotGridX, PlotGridY, PlotGridXdefault, PlotGridYdefault, CursorCPos, CursorDPos;
extern int offline;
extern int flushAfterWrite; //buzzy
int Em410xDecode(uint8_t *BitStream, size_t *size, size_t *startIdx, uint32_t *hi, uint64_t *lo)
{
// sanity check
+ if (*size < 64) return -3;
if (BitStream[1] > 1) return -1;
uint8_t fmtlen;
// preamble 0111111111
// include 0 in front to help get start pos
uint8_t preamble[] = {0,1,1,1,1,1,1,1,1,1};
- if (!preambleSearch(BitStream, preamble, sizeof(preamble), size, startIdx))
+ if (!preambleSearch(BitStream, preamble, sizeof(preamble), size, startIdx))
return -2;
- if (*size < 64) return -3;
+
+ //XL and normal size.
+ if (*size != 64 && *size != 128) return -3;
- fmtlen = (*size == 110) ? 22 : 10;
+ fmtlen = (*size == 128) ? 22 : 10;
//skip last 4bit parity row for simplicity
*size = removeParity(BitStream, *startIdx + sizeof(preamble), 5, 0, fmtlen * 5);
return errCnt;
}
+bool DetectST(uint8_t buffer[], size_t *size, int *foundclock) {
+ size_t ststart = 0, stend = 0;
+ return DetectST_ext(buffer, size, foundclock, &ststart, &stend);
+}
+
//by marshmellow
//attempt to identify a Sequence Terminator in ASK modulated raw wave
-bool DetectST(uint8_t buffer[], size_t *size, int *foundclock) {
+bool DetectST_ext(uint8_t buffer[], size_t *size, int *foundclock, size_t *ststart, size_t *stend) {
size_t bufsize = *size;
//need to loop through all samples and identify our clock, look for the ST pattern
uint8_t fndClk[] = {8,16,32,40,50,64,128};
size_t newloc = 0;
i=0;
if (g_debugMode==2) prnt("DEBUG STT: Starting STT trim - start: %d, datalen: %d ",dataloc, datalen);
-
+ bool firstrun = true;
// warning - overwriting buffer given with raw wave data with ST removed...
while ( dataloc < bufsize-(clk/2) ) {
//compensate for long high at end of ST not being high due to signal loss... (and we cut out the start of wave high part)
buffer[dataloc] = buffer[dataloc+2];
buffer[dataloc+1] = buffer[dataloc+2];
}
+ if (firstrun) {
+ *stend = dataloc;
+ *ststart = dataloc-(clk*4);
+ firstrun=false;
+ }
for (i=0; i<datalen; ++i) {
if (i+newloc < bufsize) {
if (i+newloc < dataloc)
int DetectPSKClock(uint8_t dest[], size_t size, int clock);
int DetectStrongAskClock(uint8_t dest[], size_t size, uint8_t high, uint8_t low);
bool DetectST(uint8_t buffer[], size_t *size, int *foundclock);
+bool DetectST_ext(uint8_t buffer[], size_t *size, int *foundclock, size_t *ststart, size_t *stend);
int fskdemod(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow);
int getHiLo(uint8_t *BitStream, size_t size, int *high, int *low, uint8_t fuzzHi, uint8_t fuzzLo);
uint32_t manchesterEncode2Bytes(uint16_t datain);