if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') \r
return usage_t55xx_detect();\r
\r
- if ( strlen(Cmd)==0)\r
- AquireData(CONFIGURATION_BLOCK);\r
+ if (strlen(Cmd)==0)\r
+ AquireData( CONFIGURATION_BLOCK );\r
\r
if ( !tryDetectModulation() )\r
PrintAndLog("Could not detect modulation automatically. Try setting it manually with \'lf t55xx config\'");\r
//PrintAndLog("[%02d] 0x%08X %s %s",j , blockData, sprint_bin(bits,32), indicate); \r
PrintAndLog("[%02d] 0x%08X %s",j , blockData, sprint_bin(bits,32)); \r
}\r
- \r
return 0;\r
}\r
\r
}\r
\r
if (block > 7) {\r
- PrintAndLog("Block must be between 0 and 7");\r
+ PrintAndLog("Block number must be between 0 and 7");\r
return 1;\r
}\r
\r
UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {data, block, 0}};\r
c.d.asBytes[0] = 0x0; \r
\r
- PrintAndLog("Writing to T55x7");\r
- PrintAndLog("block : %d", block);\r
- PrintAndLog("data : 0x%08X", data);\r
+ PrintAndLog("Writing to block: %d data: 0x%08X", block, data);\r
\r
//Password mode\r
if (res == 3) {\r
if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') \r
return usage_t55xx_trace();\r
\r
- if ( strlen(Cmd)==0){\r
+ if (strlen(Cmd)==0)\r
AquireData( TRACE_BLOCK );\r
- }\r
\r
DecodeT55xxBlock();\r
\r
--- /dev/null
+local cmds = require('commands')
+local getopt = require('getopt')
+local bin = require('bin')
+local utils = require('utils')
+
+local format=string.format
+local floor=math.floor
+
+example =[[
+ 1. script run test_t55x7_ask
+]]
+author = "Iceman"
+usage = "script run test_t55x7_ask"
+desc =[[
+This script will program a T55x7 TAG with the configuration: block 0x00 data 0x000100
+The outlined procedure is as following:
+
+--ASK
+ 00 00 80 40
+-- max 2
+-- manchester
+-- bit rate
+
+"lf t55xx write 0 00008040"
+"lf t55xx detect"
+"lf t55xx info"
+
+Loop:
+ change the configuretion block 0 with:
+ -xx 00 xxxx = RF/8
+ -xx 04 xxxx = RF/16
+ -xx 08 xxxx = RF/32
+ -xx 0C xxxx = RF/40
+ -xx 10 xxxx = RF/50
+ -xx 14 xxxx = RF/64
+ -xx 18 xxxx = RF/100
+ -xx 1C xxxx = RF/128
+
+
+testsuit for the ASK/MANCHESTER demod
+
+Arguments:
+ -h : this help
+]]
+
+local TIMEOUT = 2000 -- Shouldn't take longer than 2 seconds
+local DEBUG = true -- the debug flag
+
+--BLOCK 0 = 00008040 ASK / MAN
+local config1 = '00'
+local config2 = '8040'
+
+local procedurecmds = {
+ [1] = '%s%02X%s',
+ [2] = 'lf t55xx detect',
+ [3] = 'lf t55xx info',
+}
+---
+-- A debug printout-function
+function dbg(args)
+ if not DEBUG then
+ return
+ end
+
+ if type(args) == "table" then
+ local i = 1
+ while args[i] do
+ dbg(args[i])
+ i = i+1
+ end
+ else
+ print("###", args)
+ end
+end
+---
+-- This is only meant to be used when errors occur
+function oops(err)
+ print("ERROR: ",err)
+end
+---
+-- Usage help
+function help()
+ print(desc)
+ print("Example usage")
+ print(example)
+end
+--
+-- Exit message
+function ExitMsg(msg)
+ print( string.rep('--',20) )
+ print( string.rep('--',20) )
+ print(msg)
+ print()
+end
+
+function test()
+ local y
+ for y = 0x0, 0x1d, 0x4 do
+ for _ = 1, #procedurecmds do
+ local pcmd = procedurecmds[_]
+
+ if #pcmd == 0 then
+
+ elseif _ == 1 then
+
+ local config = pcmd:format(config1, y, config2)
+ dbg(('lf t55xx write 0 %s'):format(config))
+ config = tonumber(config,16)
+
+ local writecmd = Command:new{cmd = cmds.CMD_T55XX_WRITE_BLOCK, arg1 = config}
+ local err = core.SendCommand(writecmd:getBytes())
+ if err then return oops(err) end
+ local response = core.WaitForResponseTimeout(cmds.CMD_ACK,TIMEOUT)
+
+ else
+ dbg(pcmd)
+ core.console( pcmd )
+ end
+ end
+ core.clearCommandBuffer()
+ end
+ print( string.rep('--',20) )
+end
+
+local function main(args)
+
+ print( string.rep('--',20) )
+ print( string.rep('--',20) )
+
+ -- Arguments for the script
+ for o, arg in getopt.getopt(args, 'h') do
+ if o == "h" then return help() end
+ end
+
+ core.clearCommandBuffer()
+ test()
+ print( string.rep('--',20) )
+end
+main(args)
\ No newline at end of file
--- /dev/null
+local cmds = require('commands')
+local getopt = require('getopt')
+local bin = require('bin')
+local utils = require('utils')
+
+example =[[
+ 1. script run test_t55x7_bi
+]]
+author = "Iceman"
+usage = "script run test_t55x7_bi"
+desc =[[
+This script will program a T55x7 TAG with the configuration: block 0x00 data 0x00010040
+The outlined procedure is as following:
+
+--BIPHASE 00010040
+--
+
+"lf t55xx write 0 00010040"
+"lf t55xx detect"
+"lf t55xx info"
+
+Loop:
+ change the configuretion block 0 with:
+ -xx01xxxx = RF/8
+ -xx05xxxx = RF/16
+ -xx09xxxx = RF/32
+ -xx0Dxxxx = RF/40
+ -xx11xxxx = RF/50
+ -xx15xxxx = RF/64
+ -xx19xxxx = RF/100
+ -xx1Dxxxx = RF/128
+
+
+testsuit for the BIPHASE demod
+
+Arguments:
+ -h : this help
+]]
+
+local TIMEOUT = 2000 -- Shouldn't take longer than 2 seconds
+local DEBUG = true -- the debug flag
+
+--BLOCK 0 = 00010040 BIPHASE
+local config1 = '00'
+local config2 = '0040'
+
+local procedurecmds = {
+ [1] = '%s%02X%s',
+ [2] = 'lf t55xx detect',
+ [3] = 'lf t55xx info',
+}
+---
+-- A debug printout-function
+function dbg(args)
+ if not DEBUG then
+ return
+ end
+
+ if type(args) == "table" then
+ local i = 1
+ while args[i] do
+ dbg(args[i])
+ i = i+1
+ end
+ else
+ print("###", args)
+ end
+end
+---
+-- This is only meant to be used when errors occur
+function oops(err)
+ print("ERROR: ",err)
+end
+---
+-- Usage help
+function help()
+ print(desc)
+ print("Example usage")
+ print(example)
+end
+--
+-- Exit message
+function ExitMsg(msg)
+ print( string.rep('--',20) )
+ print( string.rep('--',20) )
+ print(msg)
+ print()
+end
+
+function test()
+ local y
+ for y = 1, 0x1D, 4 do
+ for _ = 1, #procedurecmds do
+ local pcmd = procedurecmds[_]
+
+ if #pcmd == 0 then
+
+ elseif _ == 1 then
+
+ local config = pcmd:format(config1, y, config2)
+ dbg(('lf t55xx write 0 %s'):format(config))
+
+ local writecmd = Command:new{cmd = cmds.CMD_T55XX_WRITE_BLOCK, arg1 = config ,arg2 = 0, arg3 = 0}
+ local err = core.SendCommand(writecmd:getBytes())
+ if err then return oops(err) end
+ local response = core.WaitForResponseTimeout(cmds.CMD_ACK,TIMEOUT)
+ else
+ dbg(pcmd)
+ core.console( pcmd )
+ end
+ end
+ core.clearCommandBuffer()
+ end
+ print( string.rep('--',20) )
+
+end
+
+local function main(args)
+
+ print( string.rep('--',20) )
+ print( string.rep('--',20) )
+
+ -- Arguments for the script
+ for o, arg in getopt.getopt(args, 'h') do
+ if o == "h" then return help() end
+ end
+
+ core.clearCommandBuffer()
+ test()
+ print( string.rep('--',20) )
+end
+main(args)
\ No newline at end of file
--- /dev/null
+local cmds = require('commands')
+local getopt = require('getopt')
+local bin = require('bin')
+local utils = require('utils')
+
+example =[[
+ 1. script run test_t55x7_fsk
+]]
+author = "Iceman"
+usage = "script run test_t55x7_fsk"
+desc =[[
+This script will program a T55x7 TAG with the configuration: block 0x00 data 0x000100
+The outlined procedure is as following:
+
+--ASK
+ 00 00 80 40
+-- max 2 blocks
+-- FSK1
+-- bit rate
+
+"lf t55xx write 0 00007040"
+"lf t55xx detect"
+"lf t55xx info"
+
+Loop:
+ change the configuretion block 0 with:
+ -xx 00 xxxx = RF/8
+ -xx 04 xxxx = RF/16
+ -xx 08 xxxx = RF/32
+ -xx 0C xxxx = RF/40
+ -xx 10 xxxx = RF/50
+ -xx 14 xxxx = RF/64
+ -xx 18 xxxx = RF/100
+ -xx 1C xxxx = RF/128
+
+
+testsuit for the ASK/MANCHESTER demod
+
+Arguments:
+ -h : this help
+]]
+
+local TIMEOUT = 2000 -- Shouldn't take longer than 2 seconds
+local DEBUG = true -- the debug flag
+
+--BLOCK 0 = 00008040 FSK
+local config1 = '00'
+local config2 = '040'
+
+local procedurecmds = {
+ [1] = '%s%02X%X%s',
+ [2] = 'lf t55xx detect',
+ [3] = 'lf t55xx info',
+}
+---
+-- A debug printout-function
+function dbg(args)
+ if not DEBUG then
+ return
+ end
+
+ if type(args) == "table" then
+ local i = 1
+ while args[i] do
+ dbg(args[i])
+ i = i+1
+ end
+ else
+ print("###", args)
+ end
+end
+---
+-- This is only meant to be used when errors occur
+function oops(err)
+ print("ERROR: ",err)
+end
+---
+-- Usage help
+function help()
+ print(desc)
+ print("Example usage")
+ print(example)
+end
+--
+-- Exit message
+function ExitMsg(msg)
+ print( string.rep('--',20) )
+ print( string.rep('--',20) )
+ print(msg)
+ print()
+end
+
+function test(modulation)
+ local y
+ for y = 0x0, 0x1d, 0x4 do
+ for _ = 1, #procedurecmds do
+ local pcmd = procedurecmds[_]
+
+ if #pcmd == 0 then
+
+ elseif _ == 1 then
+
+ local config = pcmd:format(config1, y, modulation, config2)
+ dbg(('lf t55xx write 0 %s'):format(config))
+
+ config = tonumber(config,16)
+ local writecmd = Command:new{cmd = cmds.CMD_T55XX_WRITE_BLOCK, arg1 = config}
+ local err = core.SendCommand(writecmd:getBytes())
+ if err then return oops(err) end
+ local response = core.WaitForResponseTimeout(cmds.CMD_ACK,TIMEOUT)
+
+ else
+ dbg(pcmd)
+ core.console( pcmd )
+ end
+ end
+ core.clearCommandBuffer()
+ end
+ print( string.rep('--',20) )
+end
+
+local function main(args)
+
+ print( string.rep('--',20) )
+ print( string.rep('--',20) )
+
+ -- Arguments for the script
+ for o, arg in getopt.getopt(args, 'h') do
+ if o == "h" then return help() end
+ end
+
+ core.clearCommandBuffer()
+ test(4)
+ test(5)
+ test(6)
+ test(7)
+ print( string.rep('--',20) )
+end
+main(args)
\ No newline at end of file
local getopt = require('getopt')
local bin = require('bin')
local utils = require('utils')
-local dumplib = require('html_dumplib')
example =[[
- 1. script run tracetest
- 2. script run tracetest -o
+ 1. script run test_t55x7_psk
+ 2. script run test_t55x7_psk -o
]]
author = "Iceman"
-usage = "script run test_t55x7_psk -o <filename>"
+usage = "script run test_t55x7_psk"
desc =[[
This script will program a T55x7 TAG with the configuration: block 0x00 data 0x00088040
The outlined procedure is as following:
Arguments:
-h : this help
- -o : logfile name
]]
local TIMEOUT = 2000 -- Shouldn't take longer than 2 seconds
local DEBUG = true -- the debug flag
---BLOCK 0 = 00088040
-local config1 = '0008'
+--BLOCK 0 = 00088040 PSK
+local config1 = '0014'
local config2 = '40'
+-- local procedurecmds = {
+ -- [1] = '%s%s%s%s',
+ -- [2] = 'lf read',
+ -- --[3] = '',
+ -- [3] = 'data samples',
+ -- [4] = 'data pskdetectclock',
+ -- [5] = 'data psknrzrawdemod',
+ -- [6] = 'data pskindalademod',
+-- }
+
local procedurecmds = {
[1] = '%s%s%s%s',
- [2] = 'lf read',
+ [2] = 'lf t55xx detect',
--[3] = '',
- [3] = 'data samples',
- [4] = 'data pskdetectclock',
- [5] = 'data psknrzrawdemod',
- [6] = 'data pskindalademod',
+ [3] = 'lf t55xx info',
}
-
---
-- A debug printout-function
function dbg(args)
print()
end
-function pskTest(modulation)
+function test(modulation)
local y
for y = 0, 8, 4 do
for _ = 1, #procedurecmds do
dbg("Writing to T55x7 TAG")
- local configdata = cmd:format( config1, modulation , y, config2)
+ local config = cmd:format( config1, modulation , y, config2)
+ dbg(('lf t55xx write 0 %s'):format(config))
- dbg( configdata)
-
- local writecommand = Command:new{cmd = cmds.CMD_T55XX_WRITE_BLOCK, arg1 = configdata ,arg2 = 0, arg3 = 0}
+ config = tonumber(config,16)
+ local writecommand = Command:new{cmd = cmds.CMD_T55XX_WRITE_BLOCK, arg1 = config ,arg2 = 0, arg3 = 0}
local err = core.SendCommand(writecommand:getBytes())
if err then return oops(err) end
local response = core.WaitForResponseTimeout(cmds.CMD_ACK,TIMEOUT)
-
- if response then
- local count,cmd,arg0 = bin.unpack('LL',response)
- if(arg0==1) then
- dbg("Writing success")
- else
- return nil, "Couldn't read block.."
- end
- end
-
else
dbg(cmd)
core.console( cmd )
core.clearCommandBuffer()
end
print( string.rep('--',20) )
-
end
local function main(args)
print( string.rep('--',20) )
print( string.rep('--',20) )
- local outputTemplate = os.date("testpsk_%Y-%m-%d_%H%M%S")
-
-- Arguments for the script
- for o, arg in getopt.getopt(args, 'ho:') do
+ for o, arg in getopt.getopt(args, 'h') do
if o == "h" then return help() end
- if o == "o" then outputTemplate = arg end
end
core.clearCommandBuffer()
- pskTest(1)
- pskTest(2)
- pskTest(3)
- pskTest(8)
+ test(1)
+ test(2)
+ test(3)
+ test(8)
print( string.rep('--',20) )
end
example =[[
1. script run tracetest
- 2. script run tracetest -o
-
]]
author = "Iceman"
-usage = "script run tracetest -o <filename>"
+usage = "script run tracetest"
desc =[[
This script will load several traces files in ../traces/ folder and do
"data load"
-"lf search"
+"lf search 1 u"
+
+The following tracefiles will be loaded:
+ em*.pm3
+ m*.pm3
Arguments:
-h : this help
- -o : logfile name
]]
local TIMEOUT = 2000 -- Shouldn't take longer than 2 seconds
local tracesEM = "find '../traces/' -iname 'em*.pm3' -type f"
local tracesMOD = "find '../traces/' -iname 'm*.pm3' -type f"
+ local write2File = false
local outputTemplate = os.date("testtest_%Y-%m-%d_%H%M%S")
-- Arguments for the script
- for o, arg in getopt.getopt(args, 'ho:') do
+ for o, arg in getopt.getopt(args, 'h') do
if o == "h" then return help() end
- if o == "o" then outputTemplate = arg end
end
-
+
core.clearCommandBuffer()
local files = {}
end
p.close();
- local cmdLFSEARCH = "lf search 1"
+ local cmdLFSEARCH = "lf search 1 u"
-- main loop
io.write('Starting to test traces > ')
end
io.write('\n')
- -- Write dump to files
- if not DEBUG then
- local bar = dumplib.SaveAsText(emldata, outputTemplate..'.txt')
- print(("Wrote output to: %s"):format(bar))
- end
-
- -- Show info
print( string.rep('--',20) )
end
projects / proxmark3-svn / commitdiff