Save iclass dumps to file, like mifare-dump functionality works

diff --git a/armsrc/iclass.c b/armsrc/iclass.c
index 3844ab143f242d2c4554abb18f0163a14aa6e2b9..2b28b793875e9550fc3f2adeba9b450b9cde0f26 100644 (file)
--- a/armsrc/iclass.c
+++ b/armsrc/iclass.c
@@ -1594,7 +1594,7 @@ void ReaderIClass(uint8_t arg0) {
 
 void ReaderIClass_Replay(uint8_t arg0, uint8_t *MAC) {
 
-       uint8_t card_data[24]={0};
+       uint8_t card_data[USB_CMD_DATA_SIZE]={0};
        uint16_t block_crc_LUT[255] = {0};
 
        {//Generate a lookup table for block crc
@@ -1667,7 +1667,10 @@ void ReaderIClass_Replay(uint8_t arg0, uint8_t *MAC) {
 
                cardsize = memory.k16 ? 255 : 32;
                WDT_HIT();
-
+               //Set card_data to all zeroes, we'll fill it with data
+               memset(card_data,0x0,USB_CMD_DATA_SIZE);
+               uint8_t failedRead =0;
+               uint8_t stored_data_length =0;
                //then loop around remaining blocks
                for(int block=0; block < cardsize; block++){
 
@@ -1683,14 +1686,47 @@ void ReaderIClass_Replay(uint8_t arg0, uint8_t *MAC) {
                                                resp[3], resp[4], resp[5],
                                                resp[6], resp[7]);
 
+                               //Fill up the buffer
+                               memcpy(card_data+stored_data_length,resp,8);
+                               stored_data_length += 8;
+
+                               if(stored_data_length +8 > USB_CMD_DATA_SIZE)
+                               {//Time to send this off and start afresh
+                                       cmd_send(CMD_ACK,
+                                                        stored_data_length,//data length
+                                                        failedRead,//Failed blocks?
+                                                        0,//Not used ATM
+                                                        card_data, stored_data_length);
+                                       //reset
+                                       stored_data_length = 0;
+                                       failedRead = 0;
+                               }
+
                        }else{
+                               failedRead = 1;
+                               stored_data_length +=8;//Otherwise, data becomes misaligned
                                Dbprintf("Failed to dump block %d", block);
-
                        }
                }
+               //Send off any remaining data
+               if(stored_data_length > 0)
+               {
+                       cmd_send(CMD_ACK,
+                                        stored_data_length,//data length
+                                        failedRead,//Failed blocks?
+                                        0,//Not used ATM
+                                        card_data, stored_data_length);
+               }
                //If we got here, let's break
                break;
        }
+       //Signal end of transmission
+       cmd_send(CMD_ACK,
+                        0,//data length
+                        0,//Failed blocks?
+                        0,//Not used ATM
+                        card_data, 0);
+
        LED_A_OFF();
 }
 

diff --git a/client/cmdhficlass.c b/client/cmdhficlass.c
index dba4f1132597bb8ff9ed8ad0aef4b6279bbf6966..ee7c0d6ce5d8cd07a07d2c504b6509768486ab9b 100644 (file)
--- a/client/cmdhficlass.c
+++ b/client/cmdhficlass.c
@@ -272,87 +272,111 @@ int CmdHFiClassReader_Dump(const char *Cmd)
   uint8_t key_sel[8] = {0};
   uint8_t key_sel_p[8] = { 0 };
 
-  //HACK -- Below is for testing without access to a tag
-  uint8_t fake_dummy_test = false;
-  if(fake_dummy_test)
-  {
-    uint8_t xdata[16] = {0x01,0x02,0x03,0x04,0xF7,0xFF,0x12,0xE0, //CSN from http://www.proxmark.org/forum/viewtopic.php?pid=11230#p11230
-                        0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; // Just a random CC. Would be good to add a real testcase here
-    memcpy(resp.d.asBytes,xdata, 16);
-    resp.arg[0] = 2;    
-  }
-  
-  //End hack
-
-
   UsbCommand c = {CMD_READER_ICLASS, {0}};
   c.arg[0] = FLAG_ICLASS_READER_ONLY_ONCE| FLAG_ICLASS_READER_GET_CC;
-  if(!fake_dummy_test)   
-    SendCommand(&c);
+  SendCommand(&c);
   
 
 
-  if (fake_dummy_test || WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
-        uint8_t isOK    = resp.arg[0] & 0xff;
-        uint8_t * data  = resp.d.asBytes;
+  if (!WaitForResponseTimeout(CMD_ACK,&resp,4500))
+  {
+         PrintAndLog("Command execute timeout");
+         return 0;
+  }
 
-        memcpy(CSN,data,8);
-        memcpy(CCNR,data+8,8);
+       uint8_t isOK    = resp.arg[0] & 0xff;
+       uint8_t * data  = resp.d.asBytes;
 
-        PrintAndLog("isOk:%02x", isOK);
+       memcpy(CSN,data,8);
+       memcpy(CCNR,data+8,8);
 
-        if(isOK > 0)
-        {
-            PrintAndLog("CSN: %s",sprint_hex(CSN,8));
-        }
-        if(isOK > 1)
-        {
-            if(elite)
-            {
-                //Get the key index (hash1)
-                uint8_t key_index[8] = {0};
-
-                hash1(CSN, key_index);
-                printvar("hash1", key_index,8);
-                for(i = 0; i < 8 ; i++)
-                    key_sel[i] = keytable[key_index[i]] & 0xFF;
-                PrintAndLog("Pre-fortified 'permuted' HS key that would be needed by an iclass reader to talk to above CSN:");
-                printvar("k_sel", key_sel,8);
-                //Permute from iclass format to standard format
-                permutekey_rev(key_sel,key_sel_p);
-                used_key = key_sel_p;
-            }else{
-                //Perhaps this should also be permuted to std format?
-                // Something like the code below? I have no std system
-                // to test this with /Martin
+       PrintAndLog("isOk:%02x", isOK);
 
-                //uint8_t key_sel_p[8] = { 0 };
-                //permutekey_rev(KEY,key_sel_p);
-                //used_key = key_sel_p;
+       if(isOK > 0)
+       {
+               PrintAndLog("CSN: %s",sprint_hex(CSN,8));
+       }
+       if(isOK <= 1){
+               PrintAndLog("Failed to obtain CC! Aborting");
+               return 0;
+       }
+       //Status 2 or higher
 
-                used_key = KEY;
+       if(elite)
+       {
+               //Get the key index (hash1)
+               uint8_t key_index[8] = {0};
+
+               hash1(CSN, key_index);
+               printvar("hash1", key_index,8);
+               for(i = 0; i < 8 ; i++)
+                       key_sel[i] = keytable[key_index[i]] & 0xFF;
+               PrintAndLog("Pre-fortified 'permuted' HS key that would be needed by an iclass reader to talk to above CSN:");
+               printvar("k_sel", key_sel,8);
+               //Permute from iclass format to standard format
+               permutekey_rev(key_sel,key_sel_p);
+               used_key = key_sel_p;
+       }else{
+               used_key = KEY;
+       }
 
-            }
+       PrintAndLog("Pre-fortified key that would be needed by the OmniKey reader to talk to above CSN:");
+       printvar("Used key",used_key,8);
+       diversifyKey(CSN,used_key, div_key);
+       PrintAndLog("Hash0, a.k.a diversified key, that is computed using Ksel and stored in the card (Block 3):");
+       printvar("Div key", div_key, 8);
+       printvar("CC_NR:",CCNR,12);
+       doMAC(CCNR,12,div_key, MAC);
+       printvar("MAC", MAC, 4);
+
+       uint8_t iclass_data[32000] = {0};
+       uint8_t iclass_datalen = 0;
+       uint8_t iclass_blocksFailed = 0;//Set to 1 if dump was incomplete
+
+       UsbCommand d = {CMD_READER_ICLASS_REPLAY, {readerType}};
+       memcpy(d.d.asBytes, MAC, 4);
+       clearCommandBuffer();
+       SendCommand(&d);
+       PrintAndLog("Waiting for device to dump data. Press button on device and key on keyboard to abort...");
+       while (true) {
+               printf(".");
+               if (ukbhit()) {
+                       getchar();
+                       printf("\naborted via keyboard!\n");
+                       break;
+               }
+               if(WaitForResponseTimeout(CMD_ACK,&resp,4500))
+               {
+                       uint64_t dataLength = resp.arg[0];
+                       iclass_blocksFailed |= resp.arg[1];
+
+                       if(dataLength > 0)
+                       {
+                               memcpy(iclass_data, resp.d.asBytes,dataLength);
+                               iclass_datalen += dataLength;
+                       }else
+                       {//Last transfer, datalength 0 means the dump is finished
+                               PrintAndLog("Dumped %d bytes of data from tag. ", iclass_datalen);
+                               if(iclass_blocksFailed)
+                               {
+                                       PrintAndLog("OBS! Some blocks failed to be dumped correctly!");
+                               }
+                               if(iclass_datalen > 0)
+                               {
+                                       char filename[100] = {0};
+                                       //create a preferred filename
+                                       snprintf(filename, 100,"iclass_tagdump-%02x%02x%02x%02x%02x%02x%02x%02x",
+                                                        CSN[0],CSN[1],CSN[2],CSN[3],
+                                                        CSN[4],CSN[5],CSN[6],CSN[7]);
+                                       saveFile(filename,"bin",iclass_data, iclass_datalen );
+
+                               }
+                               //Aaaand we're finished
+                               return 0;
+                       }
+               }
+       }
 
-            PrintAndLog("Pre-fortified key that would be needed by the OmniKey reader to talk to above CSN:");
-            printvar("Used key",used_key,8);
-            diversifyKey(CSN,used_key, div_key);
-            PrintAndLog("Hash0, a.k.a diversified key, that is computed using Ksel and stored in the card (Block 3):");
-            printvar("Div key", div_key, 8);
-            printvar("CC_NR:",CCNR,12);
-            doMAC(CCNR,12,div_key, MAC);
-            printvar("MAC", MAC, 4);
-
-            UsbCommand d = {CMD_READER_ICLASS_REPLAY, {readerType}};
-            memcpy(d.d.asBytes, MAC, 4);
-            if(!fake_dummy_test) SendCommand(&d);
-
-        }else{
-            PrintAndLog("Failed to obtain CC! Aborting");
-        }
-    } else {
-        PrintAndLog("Command execute timeout");
-    }
 
   return 0;
 }

diff --git a/client/loclass/fileutils.c b/client/loclass/fileutils.c
index 9ea9d1454df2af9861fcb20fc061ce5bdd8e53fa..e2ca5ce52838133d9e8b6fff732aec30711a415f 100644 (file)
--- a/client/loclass/fileutils.c
+++ b/client/loclass/fileutils.c
@@ -40,7 +40,7 @@ int saveFile(const char *preferredName, const char *suffix, const void* data, si
        }
        fwrite(data, 1, datalen, fileHandle);
        fclose(fileHandle);
-       PrintAndLog(">Saved data to '%s'", fileName);
+       PrintAndLog("Saved data to '%s'", fileName);
 
        free(fileName);