traceLen += iLen;
// parity bytes
- if (parity != NULL && iLen != 0) {
- memcpy(trace + traceLen, parity, num_paritybytes);
+ if (iLen != 0) {
+ if (parity != NULL) {
+ memcpy(trace + traceLen, parity, num_paritybytes);
+ } else {
+ memset(trace + traceLen, 0x00, num_paritybytes);
+ }
}
traceLen += num_paritybytes;
return TRUE;
}
+
+
// Emulator memory
uint8_t emlSet(uint8_t *data, uint32_t offset, uint32_t length){
uint8_t* mem = BigBuf_get_EM_addr();
ComputeCrc14443(CRC_14443_A,data,len,data+len,data+len+1);
}
+void AppendCrc14443b(uint8_t* data, int len)
+{
+ ComputeCrc14443(CRC_14443_B,data,len,data+len,data+len+1);
+}
+
+
//=============================================================================
// ISO 14443 Type A - Miller decoder
//=============================================================================
static tUart Uart;
// Lookup-Table to decide if 4 raw bits are a modulation.
-// We accept two or three consecutive "0" in any position with the rest "1"
+// We accept the following:
+// 0001 - a 3 tick wide pause
+// 0011 - a 2 tick wide pause, or a three tick wide pause shifted left
+// 0111 - a 2 tick wide pause shifted left
+// 1001 - a 2 tick wide pause shifted right
const bool Mod_Miller_LUT[] = {
- TRUE, TRUE, FALSE, TRUE, FALSE, FALSE, FALSE, FALSE,
- TRUE, TRUE, FALSE, FALSE, TRUE, FALSE, FALSE, FALSE
+ FALSE, TRUE, FALSE, TRUE, FALSE, FALSE, FALSE, TRUE,
+ FALSE, TRUE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE
};
-#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x00F0) >> 4])
-#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x000F)])
+#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x000000F0) >> 4])
+#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x0000000F)])
void UartReset()
{
Uart.parityLen = 0; // number of decoded parity bytes
Uart.shiftReg = 0; // shiftreg to hold decoded data bits
Uart.parityBits = 0; // holds 8 parity bits
- Uart.twoBits = 0x0000; // buffer for 2 Bits
- Uart.highCnt = 0;
Uart.startTime = 0;
Uart.endTime = 0;
}
{
Uart.output = data;
Uart.parity = parity;
+ Uart.fourBits = 0x00000000; // clear the buffer for 4 Bits
UartReset();
}
static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
{
- Uart.twoBits = (Uart.twoBits << 8) | bit;
+ Uart.fourBits = (Uart.fourBits << 8) | bit;
if (Uart.state == STATE_UNSYNCD) { // not yet synced
- if (Uart.highCnt < 2) { // wait for a stable unmodulated signal
- if (Uart.twoBits == 0xffff) {
- Uart.highCnt++;
- } else {
- Uart.highCnt = 0;
- }
- } else {
- Uart.syncBit = 0xFFFF; // not set
- // we look for a ...1111111100x11111xxxxxx pattern (the start bit)
- if ((Uart.twoBits & 0xDF00) == 0x1F00) Uart.syncBit = 8; // mask is 11x11111 xxxxxxxx,
- // check for 00x11111 xxxxxxxx
- else if ((Uart.twoBits & 0xEF80) == 0x8F80) Uart.syncBit = 7; // both masks shifted right one bit, left padded with '1'
- else if ((Uart.twoBits & 0xF7C0) == 0xC7C0) Uart.syncBit = 6; // ...
- else if ((Uart.twoBits & 0xFBE0) == 0xE3E0) Uart.syncBit = 5;
- else if ((Uart.twoBits & 0xFDF0) == 0xF1F0) Uart.syncBit = 4;
- else if ((Uart.twoBits & 0xFEF8) == 0xF8F8) Uart.syncBit = 3;
- else if ((Uart.twoBits & 0xFF7C) == 0xFC7C) Uart.syncBit = 2;
- else if ((Uart.twoBits & 0xFFBE) == 0xFE3E) Uart.syncBit = 1;
- if (Uart.syncBit != 0xFFFF) { // found a sync bit
- Uart.startTime = non_real_time?non_real_time:(GetCountSspClk() & 0xfffffff8);
- Uart.startTime -= Uart.syncBit;
- Uart.endTime = Uart.startTime;
- Uart.state = STATE_START_OF_COMMUNICATION;
- }
+ Uart.syncBit = 9999; // not set
+ // The start bit is one ore more Sequence Y followed by a Sequence Z (... 11111111 00x11111). We need to distinguish from
+ // Sequence X followed by Sequence Y followed by Sequence Z (111100x1 11111111 00x11111)
+ // we therefore look for a ...xx11111111111100x11111xxxxxx... pattern
+ // (12 '1's followed by 2 '0's, eventually followed by another '0', followed by 5 '1's)
+ #define ISO14443A_STARTBIT_MASK 0x07FFEF80 // mask is 00000111 11111111 11101111 10000000
+ #define ISO14443A_STARTBIT_PATTERN 0x07FF8F80 // pattern is 00000111 11111111 10001111 10000000
+ if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 0)) == ISO14443A_STARTBIT_PATTERN >> 0) Uart.syncBit = 7;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 1)) == ISO14443A_STARTBIT_PATTERN >> 1) Uart.syncBit = 6;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 2)) == ISO14443A_STARTBIT_PATTERN >> 2) Uart.syncBit = 5;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 3)) == ISO14443A_STARTBIT_PATTERN >> 3) Uart.syncBit = 4;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 4)) == ISO14443A_STARTBIT_PATTERN >> 4) Uart.syncBit = 3;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 5)) == ISO14443A_STARTBIT_PATTERN >> 5) Uart.syncBit = 2;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 6)) == ISO14443A_STARTBIT_PATTERN >> 6) Uart.syncBit = 1;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 7)) == ISO14443A_STARTBIT_PATTERN >> 7) Uart.syncBit = 0;
+
+ if (Uart.syncBit != 9999) { // found a sync bit
+ Uart.startTime = non_real_time?non_real_time:(GetCountSspClk() & 0xfffffff8);
+ Uart.startTime -= Uart.syncBit;
+ Uart.endTime = Uart.startTime;
+ Uart.state = STATE_START_OF_COMMUNICATION;
}
} else {
- if (IsMillerModulationNibble1(Uart.twoBits >> Uart.syncBit)) {
- if (IsMillerModulationNibble2(Uart.twoBits >> Uart.syncBit)) { // Modulation in both halves - error
+ if (IsMillerModulationNibble1(Uart.fourBits >> Uart.syncBit)) {
+ if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation in both halves - error
UartReset();
} else { // Modulation in first half = Sequence Z = logic "0"
if (Uart.state == STATE_MILLER_X) { // error - must not follow after X
}
}
} else {
- if (IsMillerModulationNibble2(Uart.twoBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1"
+ if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1"
Uart.bitCount++;
Uart.shiftReg = (Uart.shiftReg >> 1) | 0x100; // add a 1 to the shiftreg
Uart.state = STATE_MILLER_X;
return TRUE; // we are finished with decoding the raw data sequence
} else {
UartReset(); // Nothing received - start over
- Uart.highCnt = 1;
}
}
if (Uart.state == STATE_START_OF_COMMUNICATION) { // error - must not follow directly after SOC
UartReset();
- Uart.highCnt = 1;
} else { // a logic "0"
Uart.bitCount++;
Uart.shiftReg = (Uart.shiftReg >> 1); // add a 0 to the shiftreg
// And ready to receive another response.
DemodReset();
+ // And reset the Miller decoder including itS (now outdated) input buffer
+ UartInit(receivedCmd, receivedCmdPar);
+
LED_C_OFF();
}
TagIsActive = (Demod.state != DEMOD_UNSYNCD);
}
// Only transmit parity bit if we transmitted a complete byte
- if (j == 8) {
+ if (j == 8 && parity != NULL) {
// Get the parity bit
if (parity[i>>3] & (0x80 >> (i&0x0007))) {
// Sequence X
}
}
+
void ReaderTransmitBitsPar(uint8_t* frame, uint16_t bits, uint8_t *par, uint32_t *timing)
{
CodeIso14443aBitsAsReaderPar(frame, bits, par);
}
}
+
void ReaderTransmitPar(uint8_t* frame, uint16_t len, uint8_t *par, uint32_t *timing)
{
ReaderTransmitBitsPar(frame, len*8, par, timing);
}
+
void ReaderTransmitBits(uint8_t* frame, uint16_t len, uint32_t *timing)
{
// Generate parity and redirect
ReaderTransmitBitsPar(frame, len, par, timing);
}
+
void ReaderTransmit(uint8_t* frame, uint16_t len, uint32_t *timing)
{
// Generate parity and redirect
memset(uid_ptr,0,10);
}
+ // check for proprietary anticollision:
+ if ((resp[0] & 0x1F) == 0) {
+ return 3;
+ }
+
// OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
// which case we need to make a cascade 2 request and select - this is a long UID
// While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
if(param & ISO14A_RAW) {
if(param & ISO14A_APPEND_CRC) {
- AppendCrc14443a(cmd,len);
+ if(param & ISO14A_TOPAZMODE) {
+ AppendCrc14443b(cmd,len);
+ } else {
+ AppendCrc14443a(cmd,len);
+ }
len += 2;
if (lenbits) lenbits += 16;
}
- if(lenbits>0) {
- GetParity(cmd, lenbits/8, par);
- ReaderTransmitBitsPar(cmd, lenbits, par, NULL);
- } else {
- ReaderTransmit(cmd,len, NULL);
+ if(lenbits>0) { // want to send a specific number of bits (e.g. short commands)
+ if(param & ISO14A_TOPAZMODE) {
+ int bits_to_send = lenbits;
+ uint16_t i = 0;
+ ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 7), NULL, NULL); // first byte is always short (7bits) and no parity
+ bits_to_send -= 7;
+ while (bits_to_send > 0) {
+ ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 8), NULL, NULL); // following bytes are 8 bit and no parity
+ bits_to_send -= 8;
+ }
+ } else {
+ GetParity(cmd, lenbits/8, par);
+ ReaderTransmitBitsPar(cmd, lenbits, par, NULL); // bytes are 8 bit with odd parity
+ }
+ } else { // want to send complete bytes only
+ if(param & ISO14A_TOPAZMODE) {
+ uint16_t i = 0;
+ ReaderTransmitBitsPar(&cmd[i++], 7, NULL, NULL); // first byte: 7 bits, no paritiy
+ while (i < len) {
+ ReaderTransmitBitsPar(&cmd[i++], 8, NULL, NULL); // following bytes: 8 bits, no paritiy
+ }
+ } else {
+ ReaderTransmit(cmd,len, NULL); // 8 bits, odd parity
+ }
}
arg0 = ReaderReceive(buf, par);
cmd_send(CMD_ACK,arg0,0,0,buf,sizeof(buf));
if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, TRUE)) break;
/* And ready to receive another command. */
- UartReset();
+ UartInit(receivedCmd, receivedCmdPar);
/* And also reset the demod code */
DemodReset();
// And ready to receive another response.
DemodReset();
+ // And reset the Miller decoder including its (now outdated) input buffer
+ UartInit(receivedCmd, receivedCmdPar);
}
TagIsActive = (Demod.state != DEMOD_UNSYNCD);
}
// DROP_FIRST_HALF,
} state;
uint16_t shiftReg;
- uint16_t bitCount;
+ int16_t bitCount;
uint16_t len;
uint16_t byteCntMax;
uint16_t posCnt;
uint16_t syncBit;
uint8_t parityBits;
uint8_t parityLen;
- uint16_t highCnt;
- uint16_t twoBits;
+ uint32_t fourBits;
uint32_t startTime, endTime;
uint8_t *output;
uint8_t *parity;
CMDSRCS = nonce2key/crapto1.c\
- nonce2key/crypto1.c\
- nonce2key/nonce2key.c\
- loclass/cipher.c \
- loclass/cipherutils.c \
- loclass/des.c \
- loclass/ikeys.c \
- loclass/elite_crack.c\
- loclass/fileutils.c\
+ nonce2key/crypto1.c\
+ nonce2key/nonce2key.c\
+ loclass/cipher.c \
+ loclass/cipherutils.c \
+ loclass/des.c \
+ loclass/ikeys.c \
+ loclass/elite_crack.c\
+ loclass/fileutils.c\
mifarehost.c\
crc.c \
crc16.c \
cmdhficlass.c \
cmdhfmf.c \
cmdhfmfu.c \
+ cmdhftopaz.c \
cmdhw.c \
cmdlf.c \
cmdlfio.c \
#include "cmdhficlass.h"
#include "cmdhfmf.h"
#include "cmdhfmfu.h"
+#include "cmdhftopaz.h"
#include "protocols.h"
static int CmdHelp(const char *Cmd);
}
}
+
+void annotateTopaz(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize)
+{
+ switch(cmd[0]) {
+ case TOPAZ_REQA :snprintf(exp, size, "REQA");break;
+ case TOPAZ_WUPA :snprintf(exp, size, "WUPA");break;
+ case TOPAZ_RID :snprintf(exp, size, "RID");break;
+ case TOPAZ_RALL :snprintf(exp, size, "RALL");break;
+ case TOPAZ_READ :snprintf(exp, size, "READ");break;
+ case TOPAZ_WRITE_E :snprintf(exp, size, "WRITE-E");break;
+ case TOPAZ_WRITE_NE :snprintf(exp, size, "WRITE-NE");break;
+ case TOPAZ_RSEG :snprintf(exp, size, "RSEG");break;
+ case TOPAZ_READ8 :snprintf(exp, size, "READ8");break;
+ case TOPAZ_WRITE_E8 :snprintf(exp, size, "WRITE-E8");break;
+ case TOPAZ_WRITE_NE8 :snprintf(exp, size, "WRITE-NE8");break;
+ default: snprintf(exp,size,"?"); break;
+ }
+}
+
+
/**
06 00 = INITIATE
0E xx = SELECT ID (xx = Chip-ID)
}
/**
- * @brief iso14443B_CRC_Ok Checks CRC in command or response
+ * @brief iso14443A_CRC_check Checks CRC in command or response
+ * @param isResponse
+ * @param data
+ * @param len
+ * @return 0 : CRC-command, CRC not ok
+ * 1 : CRC-command, CRC ok
+ * 2 : Not crc-command
+ */
+
+uint8_t iso14443A_CRC_check(bool isResponse, uint8_t* data, uint8_t len)
+{
+ uint8_t b1,b2;
+
+ if(len <= 2) return 2;
+
+ if(isResponse & (len < 6)) return 2;
+
+ ComputeCrc14443(CRC_14443_A, data, len-2, &b1, &b2);
+ if (b1 != data[len-2] || b2 != data[len-1]) {
+ return 0;
+ } else {
+ return 1;
+ }
+}
+
+
+/**
+ * @brief iso14443B_CRC_check Checks CRC in command or response
* @param isResponse
* @param data
* @param len
ComputeCrc14443(CRC_14443_B, data, len-2, &b1, &b2);
if(b1 != data[len-2] || b2 != data[len-1]) {
- return 0;
+ return 0;
+ } else {
+ return 1;
}
- return 1;
}
/**
}
}
-uint16_t printTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace, uint8_t protocol, bool showWaitCycles)
+
+bool is_last_record(uint16_t tracepos, uint8_t *trace, uint16_t traceLen)
{
- bool isResponse;
- uint16_t duration, data_len, parity_len;
+ return(tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) >= traceLen);
+}
+
+
+bool next_record_is_response(uint16_t tracepos, uint8_t *trace)
+{
+ uint16_t next_records_datalen = *((uint16_t *)(trace + tracepos + sizeof(uint32_t) + sizeof(uint16_t)));
+
+ return(next_records_datalen & 0x8000);
+}
+
+
+bool merge_topaz_reader_frames(uint32_t timestamp, uint32_t *duration, uint16_t *tracepos, uint16_t traceLen, uint8_t *trace, uint8_t *frame, uint8_t *topaz_reader_command, uint16_t *data_len)
+{
+
+#define MAX_TOPAZ_READER_CMD_LEN 16
+
+ uint32_t last_timestamp = timestamp + *duration;
+
+ if ((*data_len != 1) || (frame[0] == TOPAZ_WUPA) || (frame[0] == TOPAZ_REQA)) return false;
+ memcpy(topaz_reader_command, frame, *data_len);
+
+ while (!is_last_record(*tracepos, trace, traceLen) && !next_record_is_response(*tracepos, trace)) {
+ uint32_t next_timestamp = *((uint32_t *)(trace + *tracepos));
+ *tracepos += sizeof(uint32_t);
+ uint16_t next_duration = *((uint16_t *)(trace + *tracepos));
+ *tracepos += sizeof(uint16_t);
+ uint16_t next_data_len = *((uint16_t *)(trace + *tracepos)) & 0x7FFF;
+ *tracepos += sizeof(uint16_t);
+ uint8_t *next_frame = (trace + *tracepos);
+ *tracepos += next_data_len;
+ if ((next_data_len == 1) && (*data_len + next_data_len <= MAX_TOPAZ_READER_CMD_LEN)) {
+ memcpy(topaz_reader_command + *data_len, next_frame, next_data_len);
+ *data_len += next_data_len;
+ last_timestamp = next_timestamp + next_duration;
+ } else {
+ // rewind and exit
+ *tracepos = *tracepos - next_data_len - sizeof(uint16_t) - sizeof(uint16_t) - sizeof(uint32_t);
+ break;
+ }
+ uint16_t next_parity_len = (next_data_len-1)/8 + 1;
+ *tracepos += next_parity_len;
+ }
+
+ *duration = last_timestamp - timestamp;
+
+ return true;
+}
+
+
+uint16_t printTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace, uint8_t protocol, bool showWaitCycles, bool markCRCBytes)
+{
+ bool isResponse;
+ uint16_t data_len, parity_len;
+ uint32_t duration;
+ uint8_t topaz_reader_command[9];
uint32_t timestamp, first_timestamp, EndOfTransmissionTimestamp;
char explanation[30] = {0};
uint8_t *parityBytes = trace + tracepos;
tracepos += parity_len;
+ if (protocol == TOPAZ && !isResponse) {
+ // topaz reader commands come in 1 or 9 separate frames with 7 or 8 Bits each.
+ // merge them:
+ if (merge_topaz_reader_frames(timestamp, &duration, &tracepos, traceLen, trace, frame, topaz_reader_command, &data_len)) {
+ frame = topaz_reader_command;
+ }
+ }
+
//Check the CRC status
uint8_t crcStatus = 2;
if (data_len > 2) {
- uint8_t b1, b2;
- if(protocol == ICLASS)
- {
- crcStatus = iclass_CRC_check(isResponse, frame, data_len);
-
- }else if (protocol == ISO_14443B)
- {
- crcStatus = iso14443B_CRC_check(isResponse, frame, data_len);
- }
- else if (protocol == ISO_14443A){//Iso 14443a
-
- ComputeCrc14443(CRC_14443_A, frame, data_len-2, &b1, &b2);
-
- if (b1 != frame[data_len-2] || b2 != frame[data_len-1]) {
- if(!(isResponse & (data_len < 6)))
- {
- crcStatus = 0;
- }
- }
+ switch (protocol) {
+ case ICLASS:
+ crcStatus = iclass_CRC_check(isResponse, frame, data_len);
+ break;
+ case ISO_14443B:
+ case TOPAZ:
+ crcStatus = iso14443B_CRC_check(isResponse, frame, data_len);
+ break;
+ case ISO_14443A:
+ crcStatus = iso14443A_CRC_check(isResponse, frame, data_len);
+ break;
+ default:
+ break;
}
}
//0 CRC-command, CRC not ok
uint8_t parityBits = parityBytes[j>>3];
if (protocol != ISO_14443B && isResponse && (oddparity != ((parityBits >> (7-(j&0x0007))) & 0x01))) {
snprintf(line[j/16]+(( j % 16) * 4),110, "%02x! ", frame[j]);
-
} else {
- snprintf(line[j/16]+(( j % 16) * 4),110, "%02x ", frame[j]);
+ snprintf(line[j/16]+(( j % 16) * 4), 110, " %02x ", frame[j]);
}
}
- if(crcStatus == 1)
- {//CRC-command
- char *pos1 = line[(data_len-2)/16]+(((data_len-2) % 16) * 4)-1;
- (*pos1) = '[';
- char *pos2 = line[(data_len)/16]+(((data_len) % 16) * 4)-2;
- (*pos2) = ']';
+
+ if (markCRCBytes) {
+ if(crcStatus == 0 || crcStatus == 1)
+ {//CRC-command
+ char *pos1 = line[(data_len-2)/16]+(((data_len-2) % 16) * 4);
+ (*pos1) = '[';
+ char *pos2 = line[(data_len)/16]+(((data_len) % 16) * 4);
+ sprintf(pos2, "%c", ']');
+ }
}
+
if(data_len == 0)
{
if(data_len == 0){
if(!isResponse)
{
- if(protocol == ICLASS)
- annotateIclass(explanation,sizeof(explanation),frame,data_len);
- else if (protocol == ISO_14443A)
- annotateIso14443a(explanation,sizeof(explanation),frame,data_len);
- else if(protocol == ISO_14443B)
- annotateIso14443b(explanation,sizeof(explanation),frame,data_len);
+ switch(protocol) {
+ case ICLASS: annotateIclass(explanation,sizeof(explanation),frame,data_len); break;
+ case ISO_14443A: annotateIso14443a(explanation,sizeof(explanation),frame,data_len); break;
+ case ISO_14443B: annotateIso14443b(explanation,sizeof(explanation),frame,data_len); break;
+ case TOPAZ: annotateTopaz(explanation,sizeof(explanation),frame,data_len); break;
+ default: break;
+ }
}
int num_lines = MIN((data_len - 1)/16 + 1, 16);
for (int j = 0; j < num_lines ; j++) {
if (j == 0) {
- PrintAndLog(" %9d | %9d | %s | %-64s| %s| %s",
+ PrintAndLog(" %10d | %10d | %s |%-64s | %s| %s",
(timestamp - first_timestamp),
(EndOfTransmissionTimestamp - first_timestamp),
(isResponse ? "Tag" : "Rdr"),
(j == num_lines-1) ? crc : " ",
(j == num_lines-1) ? explanation : "");
} else {
- PrintAndLog(" | | | %-64s| %s| %s",
+ PrintAndLog(" | | |%-64s | %s| %s",
line[j],
- (j == num_lines-1)?crc:" ",
+ (j == num_lines-1) ? crc : " ",
(j == num_lines-1) ? explanation : "");
}
}
- if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) > traceLen) return traceLen;
+ if (is_last_record(tracepos, trace, traceLen)) return traceLen;
- bool next_isResponse = *((uint16_t *)(trace + tracepos + 6)) & 0x8000;
-
- if (showWaitCycles && !isResponse && next_isResponse) {
+ if (showWaitCycles && !isResponse && next_record_is_response(tracepos, trace)) {
uint32_t next_timestamp = *((uint32_t *)(trace + tracepos));
- if (next_timestamp != 0x44444444) {
- PrintAndLog(" %9d | %9d | %s | fdt (Frame Delay Time): %d",
- (EndOfTransmissionTimestamp - first_timestamp),
- (next_timestamp - first_timestamp),
- " ",
- (next_timestamp - EndOfTransmissionTimestamp));
- }
+ PrintAndLog(" %9d | %9d | %s | fdt (Frame Delay Time): %d",
+ (EndOfTransmissionTimestamp - first_timestamp),
+ (next_timestamp - first_timestamp),
+ " ",
+ (next_timestamp - EndOfTransmissionTimestamp));
}
return tracepos;
int CmdHFList(const char *Cmd)
{
bool showWaitCycles = false;
+ bool markCRCBytes = false;
char type[40] = {0};
int tlen = param_getstr(Cmd,0,type);
- char param = param_getchar(Cmd, 1);
+ char param1 = param_getchar(Cmd, 1);
+ char param2 = param_getchar(Cmd, 2);
bool errors = false;
uint8_t protocol = 0;
//Validate params
- if(tlen == 0)
- {
+
+ if(tlen == 0) {
errors = true;
}
- if(param == 'h' || (param !=0 && param != 'f'))
- {
+
+ if(param1 == 'h'
+ || (param1 != 0 && param1 != 'f' && param1 != 'c')
+ || (param2 != 0 && param2 != 'f' && param2 != 'c')) {
errors = true;
}
- if(!errors)
- {
- if(strcmp(type, "iclass") == 0)
- {
+
+ if(!errors) {
+ if(strcmp(type, "iclass") == 0) {
protocol = ICLASS;
- }else if(strcmp(type, "14a") == 0)
- {
+ } else if(strcmp(type, "14a") == 0) {
protocol = ISO_14443A;
- }
- else if(strcmp(type, "14b") == 0)
- {
+ } else if(strcmp(type, "14b") == 0) {
protocol = ISO_14443B;
- }else if(strcmp(type,"raw")== 0)
- {
+ } else if(strcmp(type,"topaz")== 0) {
+ protocol = TOPAZ;
+ } else if(strcmp(type,"raw")== 0) {
protocol = -1;//No crc, no annotations
- }else{
+ } else {
errors = true;
}
}
if (errors) {
PrintAndLog("List protocol data in trace buffer.");
- PrintAndLog("Usage: hf list <protocol> [f]");
+ PrintAndLog("Usage: hf list <protocol> [f][c]");
PrintAndLog(" f - show frame delay times as well");
+ PrintAndLog(" c - mark CRC bytes");
PrintAndLog("Supported <protocol> values:");
PrintAndLog(" raw - just show raw data without annotations");
PrintAndLog(" 14a - interpret data as iso14443a communications");
PrintAndLog(" 14b - interpret data as iso14443b communications");
PrintAndLog(" iclass - interpret data as iclass communications");
+ PrintAndLog(" topaz - interpret data as topaz communications");
PrintAndLog("");
PrintAndLog("example: hf list 14a f");
PrintAndLog("example: hf list iclass");
}
- if (param == 'f') {
+ if (param1 == 'f' || param2 == 'f') {
showWaitCycles = true;
}
+ if (param1 == 'c' || param2 == 'c') {
+ markCRCBytes = true;
+ }
uint8_t *trace;
uint16_t tracepos = 0;
PrintAndLog("iso14443a - All times are in carrier periods (1/13.56Mhz)");
PrintAndLog("iClass - Timings are not as accurate");
PrintAndLog("");
- PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC | Annotation |");
- PrintAndLog("-----------|-----------|-----|-----------------------------------------------------------------|-----|--------------------|");
+ PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC | Annotation |");
+ PrintAndLog("------------|------------|-----|-----------------------------------------------------------------|-----|--------------------|");
while(tracepos < traceLen)
{
- tracepos = printTraceLine(tracepos, traceLen, trace, protocol, showWaitCycles);
+ tracepos = printTraceLine(tracepos, traceLen, trace, protocol, showWaitCycles, markCRCBytes);
}
free(trace);
static command_t CommandTable[] =
{
+<<<<<<< HEAD
+ {"help", CmdHelp, 1, "This help"},
+ {"14a", CmdHF14A, 1, "{ ISO14443A RFIDs... }"},
+ {"14b", CmdHF14B, 1, "{ ISO14443B RFIDs... }"},
+ {"15", CmdHF15, 1, "{ ISO15693 RFIDs... }"},
+ {"epa", CmdHFEPA, 1, "{ German Identification Card... }"},
+ {"legic", CmdHFLegic, 0, "{ LEGIC RFIDs... }"},
+ {"iclass", CmdHFiClass, 1, "{ ICLASS RFIDs... }"},
+ {"mf", CmdHFMF, 1, "{ MIFARE RFIDs... }"},
+ {"mfu", CmdHFMFUltra, 1, "{ MIFARE Ultralight RFIDs... }"},
+ {"topaz", CmdHFTopaz, 1, "{ TOPAZ (NFC Type 1) RFIDs... }"},
+ {"tune", CmdHFTune, 0, "Continuously measure HF antenna tuning"},
+ {"list", CmdHFList, 1, "List protocol data in trace buffer"},
+ {NULL, NULL, 0, NULL}
+=======
{"help", CmdHelp, 1, "This help"},
{"14a", CmdHF14A, 1, "{ ISO14443A RFIDs... }"},
{"14b", CmdHF14B, 1, "{ ISO14443B RFIDs... }"},
{"list", CmdHFList, 1, "List protocol data in trace buffer"},
{"search", CmdHFSearch, 1, "Search for known HF tags [preliminary]"},
{NULL, NULL, 0, NULL}
+>>>>>>> master
};
int CmdHF(const char *Cmd)
iso14a_card_select_t card;
memcpy(&card, (iso14a_card_select_t *)resp.d.asBytes, sizeof(iso14a_card_select_t));
- uint64_t select_status = resp.arg[0]; // 0: couldn't read, 1: OK, with ATS, 2: OK, no ATS
+ uint64_t select_status = resp.arg[0]; // 0: couldn't read, 1: OK, with ATS, 2: OK, no ATS, 3: proprietary Anticollision
if(select_status == 0) {
if (Cmd[0] != 's') PrintAndLog("iso14443a card select failed");
return 0;
}
+
int CmdHF14ACmdRaw(const char *cmd) {
UsbCommand c = {CMD_READER_ISO_14443a, {0, 0, 0}};
- uint8_t reply=1;
- uint8_t crc=0;
- uint8_t power=0;
- uint8_t active=0;
- uint8_t active_select=0;
- uint16_t numbits=0;
- uint32_t timeout=0;
- uint8_t bTimeout=0;
+ bool reply=1;
+ bool crc = FALSE;
+ bool power = FALSE;
+ bool active = FALSE;
+ bool active_select = FALSE;
+ uint16_t numbits = 0;
+ bool bTimeout = FALSE;
+ uint32_t timeout = 0;
+ bool topazmode = FALSE;
char buf[5]="";
- int i=0;
+ int i = 0;
uint8_t data[USB_CMD_DATA_SIZE];
- uint16_t datalen=0;
+ uint16_t datalen = 0;
uint32_t temp;
if (strlen(cmd)<2) {
PrintAndLog(" -s active signal field ON with select");
PrintAndLog(" -b number of bits to send. Useful for send partial byte");
PrintAndLog(" -t timeout in ms");
+ PrintAndLog(" -T use Topaz protocol to send command");
return 0;
}
+
// strip
while (*cmd==' ' || *cmd=='\t') cmd++;
if (cmd[i]=='-') {
switch (cmd[i+1]) {
case 'r':
- reply=0;
+ reply = FALSE;
break;
case 'c':
- crc=1;
+ crc = TRUE;
break;
case 'p':
- power=1;
+ power = TRUE;
break;
case 'a':
- active=1;
+ active = TRUE;
break;
case 's':
- active_select=1;
+ active_select = TRUE;
break;
case 'b':
sscanf(cmd+i+2,"%d",&temp);
i-=2;
break;
case 't':
- bTimeout=1;
+ bTimeout = TRUE;
sscanf(cmd+i+2,"%d",&temp);
timeout = temp;
i+=3;
while(cmd[i]!=' ' && cmd[i]!='\0') { i++; }
i-=2;
break;
+ case 'T':
+ topazmode = TRUE;
+ break;
default:
PrintAndLog("Invalid option");
return 0;
PrintAndLog("Invalid char on input");
return 0;
}
+
if(crc && datalen>0 && datalen<sizeof(data)-2)
{
uint8_t first, second;
- ComputeCrc14443(CRC_14443_A, data, datalen, &first, &second);
+ if (topazmode) {
+ ComputeCrc14443(CRC_14443_B, data, datalen, &first, &second);
+ } else {
+ ComputeCrc14443(CRC_14443_A, data, datalen, &first, &second);
+ }
data[datalen++] = first;
data[datalen++] = second;
}
}
if(bTimeout){
- #define MAX_TIMEOUT 40542464 // (2^32-1) * (8*16) / 13560000Hz * 1000ms/s =
+ #define MAX_TIMEOUT 40542464 // = (2^32-1) * (8*16) / 13560000Hz * 1000ms/s
c.arg[0] |= ISO14A_SET_TIMEOUT;
if(timeout > MAX_TIMEOUT) {
timeout = MAX_TIMEOUT;
}
c.arg[2] = 13560000 / 1000 / (8*16) * timeout; // timeout in ETUs (time to transfer 1 bit, approx. 9.4 us)
}
+
if(power)
c.arg[0] |= ISO14A_NO_DISCONNECT;
- if(datalen>0)
+
+ if(datalen > 0)
c.arg[0] |= ISO14A_RAW;
+ if(topazmode)
+ c.arg[0] |= ISO14A_TOPAZMODE;
+
// Max buffer is USB_CMD_DATA_SIZE
c.arg[1] = (datalen & 0xFFFF) | (numbits << 16);
memcpy(c.d.asBytes,data,datalen);
return 0;
}
+
static void waitCmd(uint8_t iSelect)
{
uint8_t *recv;
if (WaitForResponseTimeout(CMD_ACK,&resp,1500)) {
recv = resp.d.asBytes;
uint8_t iLen = iSelect ? resp.arg[1] : resp.arg[0];
- PrintAndLog("received %i octets",iLen);
+ PrintAndLog("received %i octets", iLen);
if(!iLen)
return;
hexout = (char *)malloc(iLen * 3 + 1);
--- /dev/null
+//-----------------------------------------------------------------------------
+// Copyright (C) 2015 Piwi
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// High frequency Topaz (NFC Type 1) commands
+//-----------------------------------------------------------------------------
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include "cmdmain.h"
+#include "cmdparser.h"
+#include "cmdhftopaz.h"
+#include "cmdhf14a.h"
+#include "ui.h"
+#include "mifare.h"
+#include "proxmark3.h"
+#include "iso14443crc.h"
+#include "protocols.h"
+
+#define TOPAZ_STATIC_MEMORY (0x0f * 8)
+
+typedef struct dynamic_lock_area {
+ struct dynamic_lock_area *next;
+ uint16_t byte_offset;
+ uint16_t size_in_bits;
+ uint16_t first_locked_byte;
+ uint16_t bytes_locked_per_bit;
+} dynamic_lock_area_t;
+
+
+static struct {
+ uint8_t HR01[2];
+ uint8_t uid[7];
+ uint8_t size;
+ uint8_t data_blocks[TOPAZ_STATIC_MEMORY/8][8];
+ dynamic_lock_area_t *dynamic_lock_areas;
+ uint8_t *dynamic_reserved_areas;
+ uint8_t *dynamic_memory;
+} topaz_tag;
+
+
+static void topaz_switch_on_field(void)
+{
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_SELECT | ISO14A_NO_DISCONNECT | ISO14A_TOPAZMODE, 0, 0}};
+ SendCommand(&c);
+}
+
+
+static void topaz_switch_off_field(void)
+{
+ UsbCommand c = {CMD_READER_ISO_14443a, {0, 0, 0}};
+ SendCommand(&c);
+}
+
+
+static int topaz_send_cmd_raw(uint8_t *cmd, uint8_t len, uint8_t *response)
+{
+ UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT | ISO14A_TOPAZMODE, len, 0}};
+ memcpy(c.d.asBytes, cmd, len);
+ SendCommand(&c);
+
+ UsbCommand resp;
+ WaitForResponse(CMD_ACK, &resp);
+
+ if (resp.arg[0] > 0) {
+ memcpy(response, resp.d.asBytes, resp.arg[0]);
+ }
+
+ return resp.arg[0];
+}
+
+
+static int topaz_send_cmd(uint8_t *cmd, uint8_t len, uint8_t *response)
+{
+ if (len > 1) {
+ uint8_t first, second;
+ ComputeCrc14443(CRC_14443_B, cmd, len-2, &first, &second);
+ cmd[len-2] = first;
+ cmd[len-1] = second;
+ }
+
+ return topaz_send_cmd_raw(cmd, len, response);
+}
+
+
+static int topaz_select(uint8_t *atqa, uint8_t *rid_response)
+{
+ // ToDo: implement anticollision
+
+ uint8_t wupa_cmd[] = {TOPAZ_WUPA};
+ uint8_t rid_cmd[] = {TOPAZ_RID, 0, 0, 0, 0, 0, 0, 0, 0};
+
+ topaz_switch_on_field();
+
+ if (!topaz_send_cmd(wupa_cmd, sizeof(wupa_cmd), atqa)) {
+ topaz_switch_off_field();
+ return -1; // WUPA failed
+ }
+
+ if (!topaz_send_cmd(rid_cmd, sizeof(rid_cmd), rid_response)) {
+ topaz_switch_off_field();
+ return -2; // RID failed
+ }
+
+ return 0; // OK
+}
+
+
+static int topaz_rall(uint8_t *uid, uint8_t *response)
+{
+ uint8_t rall_cmd[] = {TOPAZ_RALL, 0, 0, 0, 0, 0, 0, 0, 0};
+
+ memcpy(&rall_cmd[3], uid, 4);
+ if (!topaz_send_cmd(rall_cmd, sizeof(rall_cmd), response)) {
+ topaz_switch_off_field();
+ return -1; // RALL failed
+ }
+
+ return 0;
+}
+
+
+static dynamic_lock_area_t *get_dynamic_lock_area(uint16_t byteno)
+{
+ dynamic_lock_area_t *lock_area;
+
+ lock_area = topaz_tag.dynamic_lock_areas;
+
+ while (lock_area != NULL) {
+ if (byteno < lock_area->first_locked_byte) {
+ lock_area = lock_area->next;
+ } else {
+ return lock_area;
+ }
+ }
+
+ return NULL;
+}
+
+
+// check if a memory block (8 Bytes) is locked.
+// TODO: support other sizes of locked_bytes_per_bit (current assumption: each lock bit locks 8 Bytes)
+static bool topaz_byte_is_locked(uint16_t byteno)
+{
+ uint8_t *lockbits;
+ uint16_t locked_bytes_per_bit;
+ dynamic_lock_area_t *lock_area;
+
+ if (byteno < TOPAZ_STATIC_MEMORY) {
+ lockbits = &topaz_tag.data_blocks[0x0e][0];
+ locked_bytes_per_bit = 8;
+ } else {
+ lock_area = get_dynamic_lock_area(byteno);
+ if (lock_area == NULL) {
+ return false;
+ }
+ locked_bytes_per_bit = lock_area->bytes_locked_per_bit;
+ byteno = byteno - lock_area->first_locked_byte;
+ lockbits = &topaz_tag.dynamic_memory[lock_area->byte_offset - TOPAZ_STATIC_MEMORY];
+ }
+
+ uint16_t blockno = byteno / locked_bytes_per_bit;
+ if(lockbits[blockno/8] >> (blockno % 8) & 0x01) {
+ return true;
+ } else {
+ return false;
+ }
+}
+
+
+static int topaz_print_CC(uint8_t *data)
+{
+ if(data[0] != 0xe1) {
+ return -1; // no NDEF message
+ }
+
+ PrintAndLog("Capability Container: %02x %02x %02x %02x", data[0], data[1], data[2], data[3]);
+ PrintAndLog(" %02x: NDEF Magic Number", data[0]);
+ PrintAndLog(" %02x: version %d.%d supported by tag", data[1], (data[1] & 0xF0) >> 4, data[1] & 0x0f);
+ uint16_t memsize = (data[2] + 1) * 8;
+ topaz_tag.dynamic_memory = malloc(memsize - TOPAZ_STATIC_MEMORY);
+ PrintAndLog(" %02x: Physical Memory Size of this tag: %d bytes", data[2], memsize);
+ PrintAndLog(" %02x: %s / %s", data[3],
+ (data[3] & 0xF0) ? "(RFU)" : "Read access granted without any security",
+ (data[3] & 0x0F)==0 ? "Write access granted without any security" : (data[3] & 0x0F)==0x0F ? "No write access granted at all" : "(RFU)");
+ return 0;
+}
+
+
+static void get_TLV(uint8_t **TLV_ptr, uint8_t *tag, uint16_t *length, uint8_t **value)
+{
+ *length = 0;
+ *value = NULL;
+
+ *tag = **TLV_ptr;
+ *TLV_ptr += 1;
+ switch (*tag) {
+ case 0x00: // NULL TLV.
+ case 0xFE: // Terminator TLV.
+ break;
+ case 0x01: // Lock Control TLV
+ case 0x02: // Reserved Memory TLV
+ case 0x03: // NDEF message TLV
+ case 0xFD: // proprietary TLV
+ *length = **TLV_ptr;
+ *TLV_ptr += 1;
+ if (*length == 0xff) {
+ *length = **TLV_ptr << 8;
+ *TLV_ptr += 1;
+ *length |= **TLV_ptr;
+ *TLV_ptr += 1;
+ }
+ *value = *TLV_ptr;
+ *TLV_ptr += *length;
+ break;
+ default: // RFU
+ break;
+ }
+}
+
+
+static bool topaz_print_lock_control_TLVs(uint8_t *memory)
+{
+ uint8_t *TLV_ptr = memory;
+ uint8_t tag = 0;
+ uint16_t length;
+ uint8_t *value;
+ bool lock_TLV_present = false;
+ uint16_t first_locked_byte = 0x0f * 8;
+
+ while(*TLV_ptr != 0x03 && *TLV_ptr != 0xFD && *TLV_ptr != 0xFE) {
+ // all Lock Control TLVs shall be present before the NDEF message TLV, the proprietary TLV (and the Terminator TLV)
+ get_TLV(&TLV_ptr, &tag, &length, &value);
+ if (tag == 0x01) { // the Lock Control TLV
+ uint8_t pages_addr = value[0] >> 4;
+ uint8_t byte_offset = value[0] & 0x0f;
+ uint16_t size_in_bits = value[1] ? value[1] : 256;
+ uint16_t bytes_per_page = 1 << (value[2] & 0x0f);
+ uint16_t bytes_locked_per_bit = 1 << (value[2] >> 4);
+ PrintAndLog("Lock Area of %d bits at byte offset 0x%04x. Each Lock Bit locks %d bytes.",
+ size_in_bits,
+ pages_addr * bytes_per_page + byte_offset,
+ bytes_locked_per_bit);
+ lock_TLV_present = true;
+ dynamic_lock_area_t *old = topaz_tag.dynamic_lock_areas;
+ dynamic_lock_area_t *new = topaz_tag.dynamic_lock_areas;
+ if (old == NULL) {
+ new = topaz_tag.dynamic_lock_areas = (dynamic_lock_area_t *)malloc(sizeof(dynamic_lock_area_t));
+ } else {
+ while(old->next != NULL) {
+ old = old->next;
+ }
+ new = old->next = (dynamic_lock_area_t *)malloc(sizeof(dynamic_lock_area_t));
+ }
+ new->next = NULL;
+ new->first_locked_byte = first_locked_byte;
+ new->byte_offset = pages_addr * bytes_per_page + byte_offset;
+ new->size_in_bits = size_in_bits;
+ new->bytes_locked_per_bit = bytes_locked_per_bit;
+ first_locked_byte = first_locked_byte + size_in_bits*bytes_locked_per_bit;
+ }
+ }
+
+ if (!lock_TLV_present) {
+ PrintAndLog("(No Lock Control TLV present)");
+ return -1;
+ } else {
+ return 0;
+ }
+}
+
+
+static int topaz_print_reserved_memory_control_TLVs(uint8_t *memory)
+{
+ uint8_t *TLV_ptr = memory;
+ uint8_t tag = 0;
+ uint16_t length;
+ uint8_t *value;
+ bool reserved_memory_control_TLV_present = false;
+
+ while(*TLV_ptr != 0x03 && *TLV_ptr != 0xFD && *TLV_ptr != 0xFE) {
+ // all Reserved Memory Control TLVs shall be present before the NDEF message TLV, the proprietary TLV (and the Terminator TLV)
+ get_TLV(&TLV_ptr, &tag, &length, &value);
+ if (tag == 0x02) { // the Reserved Memory Control TLV
+ uint8_t pages_addr = value[0] >> 4;
+ uint8_t byte_offset = value[0] & 0x0f;
+ uint8_t size_in_bytes = value[1] ? value[1] : 256;
+ uint8_t bytes_per_page = 1 << (value[2] & 0x0f);
+ PrintAndLog("Reserved Memory of %d bytes at byte offset 0x%02x.",
+ size_in_bytes,
+ pages_addr * bytes_per_page + byte_offset);
+ reserved_memory_control_TLV_present = true;
+ }
+ }
+
+ if (!reserved_memory_control_TLV_present) {
+ PrintAndLog("(No Reserved Memory Control TLV present)");
+ return -1;
+ } else {
+ return 0;
+ }
+}
+
+
+static void topaz_print_lifecycle_state(uint8_t *data)
+{
+
+}
+
+
+static void topaz_print_NDEF(uint8_t *data)
+{
+
+}
+
+
+int CmdHFTopazReader(const char *Cmd)
+{
+ int status;
+ uint8_t atqa[2];
+ uint8_t rid_response[8];
+ uint8_t *uid_echo = &rid_response[2];
+ uint8_t rall_response[124];
+
+ status = topaz_select(atqa, rid_response);
+
+ if (status == -1) {
+ PrintAndLog("Error: couldn't receive ATQA");
+ return -1;
+ }
+
+ PrintAndLog("ATQA : %02x %02x", atqa[1], atqa[0]);
+ if (atqa[1] != 0x0c && atqa[0] != 0x00) {
+ PrintAndLog("Tag doesn't support the Topaz protocol.");
+ topaz_switch_off_field();
+ return -1;
+ }
+
+ if (status == -2) {
+ PrintAndLog("Error: tag didn't answer to RID");
+ topaz_switch_off_field();
+ return -1;
+ }
+
+ topaz_tag.HR01[0] = rid_response[0];
+ topaz_tag.HR01[1] = rid_response[1];
+
+ // ToDo: CRC check
+ PrintAndLog("HR0 : %02x (%sa Topaz tag (%scapable of carrying a NDEF message), %s memory map)", rid_response[0],
+ (rid_response[0] & 0xF0) == 0x10 ? "" : "not ",
+ (rid_response[0] & 0xF0) == 0x10 ? "" : "not ",
+ (rid_response[0] & 0x0F) == 0x10 ? "static" : "dynamic");
+ PrintAndLog("HR1 : %02x", rid_response[1]);
+
+ status = topaz_rall(uid_echo, rall_response);
+
+ if(status == -1) {
+ PrintAndLog("Error: tag didn't answer to RALL");
+ topaz_switch_off_field();
+ return -1;
+ }
+
+ memcpy(topaz_tag.uid, rall_response+2, 7);
+ PrintAndLog("UID : %02x %02x %02x %02x %02x %02x %02x",
+ topaz_tag.uid[6],
+ topaz_tag.uid[5],
+ topaz_tag.uid[4],
+ topaz_tag.uid[3],
+ topaz_tag.uid[2],
+ topaz_tag.uid[1],
+ topaz_tag.uid[0]);
+ PrintAndLog(" UID[6] (Manufacturer Byte) = %02x, Manufacturer: %s",
+ topaz_tag.uid[6],
+ getTagInfo(topaz_tag.uid[6]));
+
+ memcpy(topaz_tag.data_blocks, rall_response+2, 0x10*8);
+ PrintAndLog("");
+ PrintAndLog("Static Data blocks 00 to 0c:");
+ PrintAndLog("block# | offset | Data | Locked(y/n)");
+ char line[80];
+ for (uint16_t i = 0; i <= 0x0c; i++) {
+ for (uint16_t j = 0; j < 8; j++) {
+ sprintf(&line[3*j], "%02x ", topaz_tag.data_blocks[i][j] /*rall_response[2 + 8*i + j]*/);
+ }
+ PrintAndLog(" 0x%02x | 0x%04x | %s| %-3s", i, i*8, line, topaz_byte_is_locked(i*8) ? "yyyyyyyy" : "nnnnnnnn");
+ }
+
+ PrintAndLog("");
+ PrintAndLog("Static Reserved block 0d:");
+ for (uint16_t j = 0; j < 8; j++) {
+ sprintf(&line[3*j], "%02x ", topaz_tag.data_blocks[0x0d][j]);
+ }
+ PrintAndLog(" 0x%02x | 0x%04x | %s| %-3s", 0x0d, 0x0d*8, line, "n/a");
+
+ PrintAndLog("");
+ PrintAndLog("Static Lockbits and OTP Bytes:");
+ for (uint16_t j = 0; j < 8; j++) {
+ sprintf(&line[3*j], "%02x ", topaz_tag.data_blocks[0x0e][j]);
+ }
+ PrintAndLog(" 0x%02x | 0x%04x | %s| %-3s", 0x0e, 0x0e*8, line, "n/a");
+
+ PrintAndLog("");
+
+ status = topaz_print_CC(&topaz_tag.data_blocks[1][0]);
+
+ if (status == -1) {
+ PrintAndLog("No NDEF message present");
+ topaz_switch_off_field();
+ return 0;
+ }
+
+ PrintAndLog("");
+ bool lock_TLV_present = topaz_print_lock_control_TLVs(&topaz_tag.data_blocks[1][4]);
+
+ PrintAndLog("");
+ bool reserved_mem_present = topaz_print_reserved_memory_control_TLVs(&topaz_tag.data_blocks[1][4]);
+
+ topaz_print_lifecycle_state(&topaz_tag.data_blocks[1][0]);
+
+ topaz_print_NDEF(&topaz_tag.data_blocks[1][0]);
+
+ topaz_switch_off_field();
+ return 0;
+}
+
+
+int CmdHFTopazSim(const char *Cmd)
+{
+ PrintAndLog("not yet implemented");
+ return 0;
+}
+
+
+int CmdHFTopazCmdRaw(const char *Cmd)
+{
+ PrintAndLog("not yet implemented");
+ return 0;
+}
+
+
+static int CmdHelp(const char *Cmd);
+
+
+static command_t CommandTable[] =
+{
+ {"help", CmdHelp, 1, "This help"},
+ {"reader", CmdHFTopazReader, 0, "Act like a Topaz reader"},
+ {"sim", CmdHFTopazSim, 0, "<UID> -- Simulate Topaz tag"},
+ {"snoop", CmdHF14ASnoop, 0, "Eavesdrop a Topaz reader-tag communication"},
+ {"raw", CmdHFTopazCmdRaw, 0, "Send raw hex data to tag"},
+ {NULL, NULL, 0, NULL}
+};
+
+
+int CmdHFTopaz(const char *Cmd) {
+ // flush
+ WaitForResponseTimeout(CMD_ACK,NULL,100);
+
+ // parse
+ CmdsParse(CommandTable, Cmd);
+ return 0;
+}
+
+static int CmdHelp(const char *Cmd)
+{
+ CmdsHelp(CommandTable);
+ return 0;
+}
+
+
--- /dev/null
+//-----------------------------------------------------------------------------
+// Copyright (C) 2015 Piwi
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// High frequency Topaz (NFC Type 1) commands
+//-----------------------------------------------------------------------------
+
+#ifndef CMDHFTOPAZ_H__
+#define CMDHFTOPAZ_H__
+
+int CmdHFTopaz(const char *Cmd);
+
+#endif
INCLUDES = ../include/proxmark3.h ../include/at91sam7s512.h ../include/config_gpio.h ../include/usb_cmd.h $(APP_INCLUDES)
-CFLAGS = -c $(INCLUDE) -Wall -Werror -pedantic -std=c99 $(APP_CFLAGS) -Os
+CFLAGS = -c $(INCLUDE) -Wall -Werror -pedantic -std=c99 -Os $(APP_CFLAGS)
LDFLAGS = -nostartfiles -nodefaultlibs -Wl,-gc-sections -n
LIBS = -lgcc
#define ISO15693_READ_MULTI_SECSTATUS 0x2C
-#define ISO_14443A 0
-#define ICLASS 1
-#define ISO_14443B 2
+// Topaz command set:
+#define TOPAZ_REQA 0x26 // Request
+#define TOPAZ_WUPA 0x52 // WakeUp
+#define TOPAZ_RID 0x78 // Read ID
+#define TOPAZ_RALL 0x00 // Read All (all bytes)
+#define TOPAZ_READ 0x01 // Read (a single byte)
+#define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte)
+#define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte)
+// additional commands for Dynamic Memory Model
+#define TOPAZ_RSEG 0x10 // Read segment
+#define TOPAZ_READ8 0x02 // Read (eight bytes)
+#define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes)
+#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
+
+
+#define ISO_14443A 0
+#define ICLASS 1
+#define ISO_14443B 2
+#define TOPAZ 3
//-- Picopass fuses
#define FUSE_FPERS 0x80
} __attribute__((__packed__)) iso14a_card_select_t;
typedef enum ISO14A_COMMAND {
- ISO14A_CONNECT = 1,
- ISO14A_NO_DISCONNECT = 2,
- ISO14A_APDU = 4,
- ISO14A_RAW = 8,
- ISO14A_REQUEST_TRIGGER = 0x10,
- ISO14A_APPEND_CRC = 0x20,
- ISO14A_SET_TIMEOUT = 0x40,
- ISO14A_NO_SELECT = 0x80
+ ISO14A_CONNECT = (1 << 0),
+ ISO14A_NO_DISCONNECT = (1 << 1),
+ ISO14A_APDU = (1 << 2),
+ ISO14A_RAW = (1 << 3),
+ ISO14A_REQUEST_TRIGGER = (1 << 4),
+ ISO14A_APPEND_CRC = (1 << 5),
+ ISO14A_SET_TIMEOUT = (1 << 6),
+ ISO14A_NO_SELECT = (1 << 7),
+ ISO14A_TOPAZMODE = (1 << 8)
} iso14a_command_t;
#endif // _MIFARE_H_
projects / proxmark3-svn / commitdiff