]> cvs.zerfleddert.de Git - proxmark3-svn/commitdiff
T55xx downlink Modes
authormwalker33 <mwal5099@bigpond.net.au>
Sun, 16 Jun 2019 05:35:10 +0000 (15:35 +1000)
committermwalker33 <mwal5099@bigpond.net.au>
Sun, 16 Jun 2019 05:35:10 +0000 (15:35 +1000)
Changes :
- Added t55xx downlink protocols (long leading reference, leading 0 and 1 of 4)
- Added function to all read to call differnet downlink functions (to match write)
- Update functions to support using differnet downlink modes.
- Added support for calling downlink modes for lf t55 read, write and detect
- Added new function lf t55 bruteforcedl to support downlink modes as well as try each mode
for each password in password file.

for functions with downlink mode extenstion.

 e <mode>     - OPTIONAL downlink encoding '0' fixed-bit-length (default),
   '1' Long Zero Reference,
   '2' Leading Zero,
   '3' 1 of 4

armsrc/lfops.c
client/cmdlft55xx.c
client/cmdlft55xx.h

index 81fdd7a66c5cb8c1169af608624f0d45ab23d66d..36efe72900494ac8ace5616c04a694a5bb830bb4 100644 (file)
@@ -1203,6 +1203,8 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
 #define WRITE_0   18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
 #define WRITE_1   50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc)  432 for T55x7; 448 for E5550
 #define READ_GAP  15*8 
+// Long Leading Reference
+#define Reference_llr (136+18)*8  // Needs to be WRITR_0 + 136 clocks.
 
 void TurnReadLFOn(int delay) {
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
@@ -1220,6 +1222,265 @@ void T55xxWriteBit(int bit) {
        WaitUS(WRITE_GAP);
 }
 
+void T55xxWrite_LLR (void)
+{
+       TurnReadLFOn (Reference_llr);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       WaitUS(WRITE_GAP);      
+}
+
+#define START_GAPlz 31*8 
+#define WRITE_GAPlz 20*8 
+#define WRITElz_0   18*8 
+#define WRITElz_1   40*8 
+#define READ_GAP  15*8 
+
+void T55xxWriteBit_Leading0(int bit) {
+       if (!bit)
+               TurnReadLFOn(WRITElz_0);
+       else
+               TurnReadLFOn(WRITElz_1);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       WaitUS(WRITE_GAPlz);
+//     WaitUS(160);
+}
+
+#define START_GAP1of4 31*8 // SPEC:  1*8 to 50*8 - typ 10*8 (or 15fc)
+#define WRITE_GAP1of4 20*8 // SPEC:  1*8 to 20*8 - typ 10*8 (or 10fc)
+//  00 = reference                     // 8 * 8 -  - 68 * 8
+#define WRITE1of4_00  18*8 // SPEC:  8*8 to 68*8 - typ 24*8 (or 24fc)
+#define WRITE1of4_01  34*8 // SPEC: dref+9  - dref+16 - dref+24 
+#define WRITE1of4_10  50*8 // SPEC: dref+25 - dref+32 - dref+40
+#define WRITE1of4_11  66*8 // SPEC: dref+41 - dref+48 - dref+56
+#define READ1of4_GAP  15*8 
+
+void T55xxWriteBit_1of4(int bits) {
+       
+       switch (bits)
+       {
+               case 0 :  TurnReadLFOn(WRITE1of4_00); break;
+               case 1 :  TurnReadLFOn(WRITE1of4_01); break;
+               case 2 :  TurnReadLFOn(WRITE1of4_10); break;
+               case 3 :  TurnReadLFOn(WRITE1of4_11); break;
+               default:
+                       TurnReadLFOn(WRITE1of4_00);
+       }               
+
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       WaitUS(WRITE_GAP1of4);
+//     WaitUS(160);
+}
+
+void T55xxWriteBlockExt_Leading0 (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
+
+       LED_A_ON();
+       bool PwdMode = arg & 0x1;
+       uint8_t Page = (arg & 0x2)>>1;
+       bool testMode = arg & 0x4;
+       uint32_t i = 0;
+       
+       // Set up FPGA, 125kHz
+       LFSetupFPGAForADC(95, true);
+       StartTicks();
+       // make sure tag is fully powered up...
+       WaitMS(5);
+       // Trigger T55x7 in mode.
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+
+       WaitUS(START_GAPlz);
+       
+       
+       /* 
+          0    : Leading Zero
+          11   : Opcode
+          00   : Fixed 00 if protected write (i.e. have password)
+          <32 bit Password>
+          0    : Lock Bit
+          <32 bit data> 
+          <3 bit addr>
+
+               Standard Write : 0 1p L <32 data bits> <3 bit addr>
+                                0 10 0 00000000000000000000000000000000 001
+               Protected Write: 0 1p 00 <32 pwd bits> L <32 data bits> <3 bit addr>
+                                            0 10 00 00000000000000000000000000000000 0 00000000000000000000000000000000 001
+               Wake Up                  0 10 00 <32 pwd bits>
+               Protected Read   0 1p 00 <32 pwd bits> 0 <3 bit addr>
+               Standard Read    0 1p 0 <3 bit addr>
+               Page 0/1 read    0 1p
+               Reset            0 00
+               
+       */
+               T55xxWriteBit_Leading0 (0); //T55xxWriteBit(0);
+                               
+       
+               if (testMode) Dbprintf("TestMODE");
+                       // Std Opcode 10
+                       T55xxWriteBit_Leading0 (testMode ? 0 : 1);
+                       T55xxWriteBit_Leading0 (testMode ? 1 : Page); //Page 0
+               
+       
+               if (PwdMode) {
+                       // Leading zero - insert two fixed 00 between opcode and password
+                       T55xxWriteBit_Leading0 (0);
+                       T55xxWriteBit_Leading0 (0);
+                       // Send Pwd
+                       for (i = 0x80000000; i != 0; i >>= 1)
+                               T55xxWriteBit_Leading0 (Pwd & i);
+               }
+       
+               // Send Lock bit
+               T55xxWriteBit_Leading0 (0);
+
+               // Send Data
+               for (i = 0x80000000; i != 0; i >>= 1)
+                       T55xxWriteBit_Leading0(Data & i);
+
+               // Send Block number
+               for (i = 0x04; i != 0; i >>= 1)
+                       T55xxWriteBit_Leading0 (Block & i);
+                       
+               // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
+               // so wait a little more)
+               // "there is a clock delay before programming" 
+               //  - programming takes ~5.6ms for t5577 ~18ms for E5550 or t5567
+               //  so we should wait 1 clock + 5.6ms then read response? 
+               //  but we need to know we are dealing with t5577 vs t5567 vs e5550 (or q5) marshmellow...
+               if (testMode) {
+                       //TESTMODE TIMING TESTS: 
+                       // <566us does nothing 
+                       // 566-568 switches between wiping to 0s and doing nothing
+                       // 5184 wipes and allows 1 block to be programmed.
+                       // indefinite power on wipes and then programs all blocks with bitshifted data sent.
+                       TurnReadLFOn(5184); 
+
+               } else {
+                       TurnReadLFOn(20 * 1000);
+                       //could attempt to do a read to confirm write took
+                       // as the tag should repeat back the new block 
+                       // until it is reset, but to confirm it we would 
+                       // need to know the current block 0 config mode for
+                       // modulation clock an other details to demod the response...
+                       // response should be (for t55x7) a 0 bit then (ST if on) 
+                       // block data written in on repeat until reset. 
+
+                       //DoPartialAcquisition(20, true, 12000);
+               }
+
+               // turn field off
+               FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+               LED_A_OFF();
+       
+}
+void T55xxWriteBlockExt_1of4 (uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
+
+       LED_A_ON();
+    bool PwdMode = arg & 0x1;
+       uint8_t Page = (arg & 0x2)>>1;
+       bool testMode = arg & 0x4;
+       int bitpos;
+       uint8_t bits;
+       
+       // Set up FPGA, 125kHz
+       LFSetupFPGAForADC(95, true);
+       StartTicks();
+       // make sure tag is fully powered up...
+       WaitMS(5);
+       // Trigger T55x7 in mode.
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+
+       
+       WaitUS(START_GAP1of4);
+       
+       
+       /* 
+          00   : 1 if 4
+          11   : Opcode
+          00   : Fixed 00 if protected write (i.e. have password)
+          <32 bit Password>
+          0    : Lock Bit
+          <32 bit data> 
+          <3 bit addr>
+
+               Standard Write : 00 1p L <32 data bits> <3 bit addr>
+                                00 10 0 00000000000000000000000000000000 001
+               Protected Write: 00 1p 00 <32 pwd bits> L <32 data bits> <3 bit addr>
+                                            00 10 00 00000000000000000000000000000000 0 00000000000000000000000000000000 001
+               Wake Up                  00 10 00 <32 pwd bits>
+               Protected Read   00 1p 00 <32 pwd bits> 0 <3 bit addr>
+               Standard Read    00 1p 0 <3 bit addr>
+               Page 0/1 read    00 1p
+               Reset            00 00
+               
+       */
+               T55xxWriteBit_1of4 (0); //Send Reference 00
+       
+               if (testMode) Dbprintf("TestMODE");
+               // Std Opcode 10
+               if (testMode) bits  = 0; else bits   = 2;                       // 0x or 1x
+               if (testMode) bits |= 1; else bits  += (Page);  //  x0 or x1
+               T55xxWriteBit_1of4 (bits);
+               
+               if (PwdMode) {
+                       // 1 of 4 00 - insert two fixed 00 between opcode and password
+                       T55xxWriteBit_1of4 (0); // 00
+                       
+                       // Send Pwd
+                       for (bitpos = 31; bitpos >= 1; bitpos -= 2) { // 2 bits at a time
+                               bits = (((Pwd >> bitpos) & 1) << 1) + ((Pwd >> (bitpos-1)) & 1);        
+                               T55xxWriteBit_1of4 (bits);
+                       }
+               }
+               
+               // Send Lock bit
+               bits = 0; // Add lock bit (Not Set) to the next 2 bits
+       
+               // Send Data - offset by 1 bit due to lock bit
+               // 2 bits at a time - Initilised with lock bit above
+               for (bitpos = 31; bitpos >= 1; bitpos -= 2) { 
+                               bits  |= ((Data >> bitpos) & 1);  // Add Low bit
+                               T55xxWriteBit_1of4 (bits);
+                               bits = ((Data >> (bitpos-1)) & 1) << 1; // Set next high bit    
+               }
+
+               // Send Block number
+               bits  |= ((Block >> 2) & 1); 
+               T55xxWriteBit_1of4 (bits);
+               bits = (Block & 3);// 1) & 2) + (Block & 1);
+               T55xxWriteBit_1of4 (bits);                      
+                       
+               // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
+               // so wait a little more)
+               // "there is a clock delay before programming" 
+               //  - programming takes ~5.6ms for t5577 ~18ms for E5550 or t5567
+               //  so we should wait 1 clock + 5.6ms then read response? 
+               //  but we need to know we are dealing with t5577 vs t5567 vs e5550 (or q5) marshmellow...
+               if (testMode) {
+                       //TESTMODE TIMING TESTS: 
+                       // <566us does nothing 
+                       // 566-568 switches between wiping to 0s and doing nothing
+                       // 5184 wipes and allows 1 block to be programmed.
+                       // indefinite power on wipes and then programs all blocks with bitshifted data sent.
+                       TurnReadLFOn(5184); 
+
+               } else {
+                       TurnReadLFOn(20 * 1000);
+                       //could attempt to do a read to confirm write took
+                       // as the tag should repeat back the new block 
+                       // until it is reset, but to confirm it we would 
+                       // need to know the current block 0 config mode for
+                       // modulation clock an other details to demod the response...
+                       // response should be (for t55x7) a 0 bit then (ST if on) 
+                       // block data written in on repeat until reset. 
+
+                       //DoPartialAcquisition(20, true, 12000);
+               }
+
+               // turn field off
+               FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+               LED_A_OFF();
+       
+}
+
 // Send T5577 reset command then read stream (see if we can identify the start of the stream)
 void T55xxResetRead(void) {
        LED_A_ON();
@@ -1324,12 +1585,34 @@ void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg
 
 // Write one card block in page 0, no lock
 void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
-       T55xxWriteBlockExt(Data, Block, Pwd, arg);
+//     arg 8 bit 00000000 
+//            0000000x Password
+//            000000x0  Page
+//            00000x00  Test Mode
+//            000xx000  (0x18) where xx : 00 - Normal Write, 01 - Long Leading Reference
+//                                                                               10 - Leading 0,    11 - 1 of 4
+       uint8_t downlink_mode;
+       
+       downlink_mode = (arg >> 3) & 0x03;
+       
+       switch (downlink_mode)
+       {
+               case 0 :        T55xxWriteBlockExt          (Data, Block, Pwd, arg);    break;
+               case 1 :    T55xxWrite_LLR ();
+                                       T55xxWriteBlockExt          (Data, Block, Pwd, arg);
+                                       break;
+               case 2 :        T55xxWriteBlockExt_Leading0 (Data, Block, Pwd, arg);    break;
+               case 3 :        T55xxWriteBlockExt_1of4     (Data, Block, Pwd, arg);    break;
+               
+               default:
+                               T55xxWriteBlockExt    (Data, Block, Pwd, arg);
+       }                                       
+
        cmd_send(CMD_ACK,0,0,0,0,0);
 }
 
 // Read one card block in page [page]
-void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
+void T55xxReadBlockExt (uint16_t arg0, uint8_t Block, uint32_t Pwd) {
        LED_A_ON();
        bool PwdMode = arg0 & 0x1;
        uint8_t Page = (arg0 & 0x2) >> 1;
@@ -1379,10 +1662,163 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
 
        // Turn the field off
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-       cmd_send(CMD_ACK,0,0,0,0,0);    
+//     cmd_send(CMD_ACK,0,0,0,0,0);    
+       LED_A_OFF();
+}
+
+void T55xxReadBlockExt_Leading0 (uint16_t arg0, uint8_t Block, uint32_t Pwd) {
+       LED_A_ON();
+       bool     PwdMode = arg0 & 0x1;
+       uint8_t  Page    = (arg0 & 0x2) >> 1;
+       uint32_t i       = 0;
+       bool RegReadMode = (Block == 0xFF);//regular read mode
+        
+       //clear buffer now so it does not interfere with timing later
+       BigBuf_Clear_ext(false);
+
+       //make sure block is at max 7
+       Block &= 0x7;
+
+       // Set up FPGA, 125kHz to power up the tag
+       LFSetupFPGAForADC(95, true);
+       StartTicks();
+       // make sure tag is fully powered up...
+       WaitMS(5);
+       // Trigger T55x7 Direct Access Mode with start gap
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       WaitUS(START_GAPlz);
+
+       T55xxWriteBit_Leading0 (0); 
+
+       // Opcode 1[page]
+       T55xxWriteBit_Leading0 (1);
+       T55xxWriteBit_Leading0 (Page); //Page 0
+
+       if (PwdMode){
+               // Send Pwd
+               T55xxWriteBit_Leading0 (0);
+               T55xxWriteBit_Leading0 (0);             
+               
+               for (i = 0x80000000; i != 0; i >>= 1)
+                       T55xxWriteBit_Leading0 (Pwd & i);
+       }
+       // Send a zero bit separation
+       T55xxWriteBit_Leading0(0);
+
+       // Send Block number (if direct access mode)
+       if (!RegReadMode)
+               for (i = 0x04; i != 0; i >>= 1)
+                       T55xxWriteBit_Leading0(Block & i);              
+
+       // Turn field on to read the response
+       // 137*8 seems to get to the start of data pretty well... 
+       //  but we want to go past the start and let the repeating data settle in...
+       TurnReadLFOn(210*8); 
+
+       // Acquisition
+       // Now do the acquisition
+       DoPartialAcquisition(0, true, 12000, 0);
+
+       // Turn the field off
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+//     cmd_send(CMD_ACK,0,0,0,0,0);    
        LED_A_OFF();
 }
 
+void T55xxReadBlockExt_1of4 (uint16_t arg0, uint8_t Block, uint32_t Pwd) {
+       LED_A_ON();
+       bool     PwdMode = arg0 & 0x1;
+       uint8_t  Page    = (arg0 & 0x2) >> 1;
+       //uint32_t i       = 0;
+       bool RegReadMode = (Block == 0xFF);//regular read mode
+       uint8_t bits;
+       int bitpos;
+        
+       //clear buffer now so it does not interfere with timing later
+       BigBuf_Clear_ext(false);
+
+       //make sure block is at max 7
+       Block &= 0x7;
+
+       // Set up FPGA, 125kHz to power up the tag
+       LFSetupFPGAForADC(95, true);
+       StartTicks();
+       // make sure tag is fully powered up...
+       WaitMS(5);
+       // Trigger T55x7 Direct Access Mode with start gap
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+       WaitUS(START_GAP1of4);
+
+       T55xxWriteBit_1of4 (0); // 2 Bit 00 leading reference 
+
+       // Opcode 1[page]
+       bits = 2 + Page;
+       T55xxWriteBit_1of4 (bits);
+       
+       if (PwdMode) {
+               // 1 of 4 00 - insert two fixed 00 between opcode and password
+               T55xxWriteBit_1of4 (0); // 00
+               
+               // Send Pwd
+               for (bitpos = 31; bitpos >= 1; bitpos -= 2) { // 2 bits at a time
+                       bits = (((Pwd >> bitpos) & 1) << 1) + ((Pwd >> (bitpos-1)) & 1);        
+                       T55xxWriteBit_1of4 (bits);
+               }
+       }
+       
+       // Send Lock bit
+       bits = 0; // Add lock bit (Not Set) to the next 2 bits
+
+       // Send Block number (if direct access mode)
+       if (!RegReadMode){
+               // Send Block number
+               bits  += ((Block >> 2) & 1); 
+               T55xxWriteBit_1of4 (bits);
+               bits = (Block & 3); //  + (Block & 1);
+               T55xxWriteBit_1of4 (bits);                              
+       }       
+
+       // Turn field on to read the response
+       // 137*8 seems to get to the start of data pretty well... 
+       //  but we want to go past the start and let the repeating data settle in...
+       TurnReadLFOn(210*8); 
+
+       // Acquisition
+       // Now do the acquisition
+       DoPartialAcquisition(0, true, 12000, 0);
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+//     cmd_send(CMD_ACK,0,0,0,0,0);    
+       LED_A_OFF();
+}
+
+void T55xxReadBlock (uint16_t arg0, uint8_t Block, uint32_t Pwd) {
+//     arg0 16 bit 00000000 
+//              0000000x  Password
+//              000000x0  Page
+//              00000x00  
+//              000xx000  (0x18) where xx : 00 - Normal Write, 01 - Long Leading Reference
+//                                                                                 10 - Leading 0,    11 - 1 of 4
+       uint8_t downlink_mode;
+       
+       downlink_mode = (arg0 >> 3) & 0x03;
+
+       //  downlink mode id set to match the 2 bit as per Tech Sheet
+       switch (downlink_mode)
+       {
+               case 0 :        T55xxReadBlockExt                       (arg0, Block, Pwd);     break;
+               case 1 :        T55xxWrite_LLR ();
+                                       T55xxReadBlockExt                       (arg0, Block, Pwd);
+                                   break;
+               case 2 :        T55xxReadBlockExt_Leading0      (arg0, Block, Pwd);     break;
+               case 3 :        T55xxReadBlockExt_1of4          (arg0, Block, Pwd);             break;
+               default:
+                                       T55xxReadBlockExt           (arg0, Block, Pwd) ;
+       }                                       
+
+//     T55xxReadBlockExt           (arg0, Block, Pwd) ;
+       cmd_send(CMD_ACK,0,0,0,0,0);
+}
+
 void T55xxWakeUp(uint32_t Pwd){
        LED_B_ON();
        uint32_t i = 0;
index b286c392493334c13187c18dc1253a1300463f74..25df4c7617bfefc639558b20f13eb2f323cbbe9c 100644 (file)
@@ -67,6 +67,8 @@ int usage_t55xx_read(){
        PrintAndLog("     p <password> - OPTIONAL password (8 hex characters)");\r
        PrintAndLog("     o            - OPTIONAL override safety check");\r
        PrintAndLog("     1            - OPTIONAL read Page 1 instead of Page 0");\r
+       PrintAndLog("     e <mode>     - OPTIONAL downlink encoding '0' fixed-bit-length (default), '1' Long Zero Reference"); \r
+       PrintAndLog("                                               '2' Leading Zero,               '3' 1 of 4 "); \r
        PrintAndLog("     ****WARNING****");\r
        PrintAndLog("     Use of read with password on a tag not configured for a pwd");\r
        PrintAndLog("     can damage the tag");\r
@@ -86,6 +88,8 @@ int usage_t55xx_write(){
        PrintAndLog("     p <password> - OPTIONAL password 4bytes (8 hex characters)");\r
        PrintAndLog("     1            - OPTIONAL write Page 1 instead of Page 0");\r
        PrintAndLog("     t            - OPTIONAL test mode write - ****DANGER****");   \r
+       PrintAndLog("     e <mode>     - OPTIONAL downlink encoding '0' fixed-bit-length (default), '1' Long Zero Reference"); \r
+       PrintAndLog("                                               '2' Leading Zero,               '3' 1 of 4 "); \r
        PrintAndLog("");\r
        PrintAndLog("Examples:");\r
        PrintAndLog("      lf t55xx write b 3 d 11223344            - write 11223344 to block 3");\r
@@ -132,6 +136,8 @@ int usage_t55xx_detect(){
        PrintAndLog("Options:");\r
        PrintAndLog("     1             - if set, use Graphbuffer otherwise read data from tag.");\r
        PrintAndLog("     p <password>  - OPTIONAL password (8 hex characters)");\r
+       PrintAndLog("     e <mode>     - OPTIONAL downlink encoding '0' fixed-bit-length (default), '1' Long Zero Reference");\r
+       PrintAndLog("                                               '2' Leading Zero,               '3' 1 of 4 "); \r
        PrintAndLog("");\r
        PrintAndLog("Examples:");\r
        PrintAndLog("      lf t55xx detect");\r
@@ -182,6 +188,24 @@ int usage_t55xx_bruteforce(){
        PrintAndLog("");\r
        return 0;\r
 }\r
+int usage_t55xx_bruteforce_downlink(){\r
+       PrintAndLog("This command uses A) bruteforce to scan a number range");\r
+       PrintAndLog("                  B) a dictionary attack");\r
+       PrintAndLog("Usage: lf t55xx bruteforce <start password> <end password> [i <*.dic>]");\r
+       PrintAndLog("       password must be 4 bytes (8 hex symbols)");\r
+       PrintAndLog("Options:");\r
+       PrintAndLog("     h                         - this help");\r
+       PrintAndLog("     r <start_pwd> <end_pwd>   - 4 byte hex value to start and end pwd search at");\r
+       PrintAndLog("     i <*.dic>                             - loads a default keys dictionary file <*.dic>");\r
+       PrintAndLog("     e <mode>                              - OPTIONAL downlink encoding '0' fixed-bit-length (default), '1' Long Zero Reference"); \r
+       PrintAndLog("                                                            '2' Leading Zero,               '3' 1 of 4 "); \r
+       PrintAndLog("");\r
+       PrintAndLog("Examples:");\r
+       PrintAndLog("       lf t55xx bruteforce aaaaaaaa bbbbbbbb");\r
+       PrintAndLog("       lf t55xx bruteforce i default_pwd.dic");\r
+       PrintAndLog("");\r
+       return 0;\r
+}\r
 int usage_t55xx_wipe(){\r
        PrintAndLog("Usage:  lf t55xx wipe [h] [Q5]");\r
        PrintAndLog("This commands wipes a tag, fills blocks 1-7 with zeros and a default configuration block");\r
@@ -311,12 +335,12 @@ int CmdT55xxSetConfig(const char *Cmd) {
        return printConfiguration ( config );\r
 }\r
 \r
-int T55xxReadBlock(uint8_t block, bool page1, bool usepwd, bool override, uint32_t password){\r
+int T55xxReadBlock(uint8_t block, bool page1, bool usepwd, bool override, uint32_t password, uint8_t downlink_mode){\r
        //Password mode\r
        if ( usepwd ) {\r
                // try reading the config block and verify that PWD bit is set before doing this!\r
                if ( !override ) {\r
-                       if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, false, 0 ) ) return 0;\r
+                       if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, false, 0,downlink_mode ) ) return 0;\r
                        if ( !tryDetectModulation() ) {\r
                                PrintAndLog("Safety Check: Could not detect if PWD bit is set in config block. Exits.");\r
                                return 0;\r
@@ -330,7 +354,7 @@ int T55xxReadBlock(uint8_t block, bool page1, bool usepwd, bool override, uint32
                }\r
        }\r
 \r
-       if (!AquireData(page1, block, usepwd, password) )       return 0;\r
+       if (!AquireData(page1, block, usepwd, password,downlink_mode) ) return 0;\r
        if (!DecodeT55xxBlock()) return 0;\r
 \r
        char blk[10]={0};\r
@@ -342,6 +366,8 @@ int T55xxReadBlock(uint8_t block, bool page1, bool usepwd, bool override, uint32
 int CmdT55xxReadBlock(const char *Cmd) {\r
        uint8_t block = REGULAR_READ_MODE_BLOCK;\r
        uint32_t password = 0; //default to blank Block 7\r
+       uint8_t downlink_mode = 0;\r
+       \r
        bool usepwd = false;\r
        bool override = false;\r
        bool page1 = false;\r
@@ -372,6 +398,12 @@ int CmdT55xxReadBlock(const char *Cmd) {
                        page1 = true;\r
                        cmdp++;\r
                        break;\r
+               case 'e':\r
+               case 'E':\r
+                       downlink_mode = param_getchar(Cmd, cmdp+1) - '0';\r
+                       if (downlink_mode > 3) downlink_mode = 0;\r
+                       cmdp +=2;\r
+                       break;\r
                default:\r
                        PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
                        errors = true;\r
@@ -386,7 +418,7 @@ int CmdT55xxReadBlock(const char *Cmd) {
        }\r
 \r
        printT5xxHeader(page1);\r
-       return T55xxReadBlock(block, page1, usepwd, override, password);\r
+       return T55xxReadBlock(block, page1, usepwd, override, password, downlink_mode);\r
 }\r
 \r
 bool DecodeT55xxBlock(){\r
@@ -465,6 +497,7 @@ int CmdT55xxDetect(const char *Cmd){
        bool usepwd = false;\r
        uint32_t password = 0;\r
        uint8_t cmdp = 0;\r
+       uint8_t downlink_mode = 0;\r
 \r
        while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {\r
                switch(param_getchar(Cmd, cmdp)) {\r
@@ -482,6 +515,12 @@ int CmdT55xxDetect(const char *Cmd){
                        useGB = true;\r
                        cmdp++;\r
                        break;\r
+               case 'e':\r
+               case 'E':\r
+                       downlink_mode = param_getchar(Cmd, cmdp+1) - '0';\r
+                       if (downlink_mode > 3) downlink_mode = 0;\r
+                       cmdp +=2;\r
+                       break;                  \r
                default:\r
                        PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
                        errors = true;\r
@@ -491,13 +530,24 @@ int CmdT55xxDetect(const char *Cmd){
        if (errors) return usage_t55xx_detect();\r
        \r
        if ( !useGB) {\r
-               if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, usepwd, password) )\r
+               if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, usepwd, password,downlink_mode) )\r
                        return 0;\r
        }\r
        \r
        if ( !tryDetectModulation() )\r
                PrintAndLog("Could not detect modulation automatically. Try setting it manually with \'lf t55xx config\'");\r
-\r
+       else {\r
+               // Add downlink mode to reference.\r
+               switch (downlink_mode) {\r
+                       case  0 :       PrintAndLog ("Downlink   : e 0 - Default/Fixed Bit Length"); break;\r
+                       case  1 :   PrintAndLog ("Downlink   : e 1 - Long Leading Reference"); break;\r
+                       case  2 :   PrintAndLog ("Downlink   : e 2 - Leading Zero Reference"); break;\r
+                       case  3 :   PrintAndLog ("Downlink   : e 3 - 1 of 4 Coding"); break;\r
+       //              default:\r
+                               \r
+                               // No default action\r
+               }\r
+       }\r
        return 1;\r
 }\r
 \r
@@ -898,6 +948,8 @@ int CmdT55xxWriteBlock(const char *Cmd) {
        uint8_t block = 0xFF; //default to invalid block\r
        uint32_t data = 0; //default to blank Block \r
        uint32_t password = 0; //default to blank Block 7\r
+       uint32_t downlink_mode = 0;\r
+       \r
        bool usepwd = false;\r
        bool page1 = false;     \r
        bool gotdata = false;\r
@@ -935,6 +987,12 @@ int CmdT55xxWriteBlock(const char *Cmd) {
                        page1 = true;\r
                        cmdp++;\r
                        break;\r
+               case 'e':\r
+               case 'E':\r
+                       downlink_mode = param_getchar(Cmd, cmdp+1) - '0';\r
+                       if (downlink_mode > 3) downlink_mode = 0;\r
+                       cmdp +=2;\r
+                       break;\r
                default:\r
                        PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
                        errors = true;\r
@@ -952,17 +1010,19 @@ int CmdT55xxWriteBlock(const char *Cmd) {
        UsbCommand resp;\r
        c.d.asBytes[0] = (page1) ? 0x2 : 0; \r
        c.d.asBytes[0] |= (testMode) ? 0x4 : 0; \r
-\r
+       c.d.asBytes[0] |= (downlink_mode << 3);\r
+       \r
        char pwdStr[16] = {0};\r
        snprintf(pwdStr, sizeof(pwdStr), "pwd: 0x%08X", password);\r
 \r
        PrintAndLog("Writing page %d  block: %02d  data: 0x%08X %s", page1, block, data,  (usepwd) ? pwdStr : "" );\r
-\r
+       \r
        //Password mode\r
        if (usepwd) {\r
                c.arg[2] = password;\r
                c.d.asBytes[0] |= 0x1; \r
        }\r
+       \r
        clearCommandBuffer();\r
        SendCommand(&c);\r
        if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){\r
@@ -980,7 +1040,7 @@ int CmdT55xxReadTrace(const char *Cmd) {
                return usage_t55xx_trace();\r
 \r
        if (strlen(Cmd)==0)\r
-               if ( !AquireData( T55x7_PAGE1, REGULAR_READ_MODE_BLOCK, pwdmode, password ) )\r
+               if ( !AquireData( T55x7_PAGE1, REGULAR_READ_MODE_BLOCK, pwdmode, password,0 ) )\r
                        return 0;\r
 \r
        if ( config.Q5 ) {\r
@@ -1144,7 +1204,7 @@ int CmdT55xxInfo(const char *Cmd){
                return usage_t55xx_info();\r
        \r
        if (strlen(Cmd)==0)\r
-               if ( !AquireData( T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, pwdmode, password ) )\r
+               if ( !AquireData( T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, pwdmode, password,0 ) )\r
                        return 1;\r
 \r
        if (!DecodeT55xxBlock()) return 1;\r
@@ -1212,20 +1272,21 @@ int CmdT55xxDump(const char *Cmd){
        \r
        printT5xxHeader(0);\r
        for ( uint8_t i = 0; i <8; ++i)\r
-               T55xxReadBlock(i, 0, usepwd, override, password);\r
+               T55xxReadBlock(i, 0, usepwd, override, password,0);\r
 \r
        printT5xxHeader(1);\r
        for ( uint8_t   i = 0; i<4; i++)\r
-               T55xxReadBlock(i, 1, usepwd, override, password);               \r
+               T55xxReadBlock(i, 1, usepwd, override, password,0);             \r
 \r
        return 1;\r
 }\r
 \r
-int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password ){\r
+int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password, uint8_t downlink_mode ){\r
        // arg0 bitmodes:\r
        // bit0 = pwdmode\r
        // bit1 = page to read from\r
        uint8_t arg0 = (page<<1) | pwdmode;\r
+       arg0 |= (downlink_mode << 3);\r
        UsbCommand c = {CMD_T55XX_READ_BLOCK, {arg0, block, password}};\r
 \r
        clearCommandBuffer();\r
@@ -1397,6 +1458,7 @@ int CmdT55xxBruteForce(const char *Cmd) {
        char buf[9];\r
        char filename[FILE_PATH_SIZE]={0};\r
        int keycnt = 0;\r
+       uint8_t downlink_mode = 0;\r
        int ch;\r
        uint8_t stKeyBlock = 20;\r
        uint8_t *keyBlock = NULL, *p = NULL;\r
@@ -1480,7 +1542,7 @@ int CmdT55xxBruteForce(const char *Cmd) {
 \r
                        PrintAndLog("Testing %08X", testpwd);\r
 \r
-                       if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, testpwd)) {\r
+                       if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, testpwd,downlink_mode)) {\r
                                PrintAndLog("Aquireing data from device failed. Quitting");\r
                                free(keyBlock);\r
                                return 0;\r
@@ -1525,7 +1587,7 @@ int CmdT55xxBruteForce(const char *Cmd) {
                        return 0;\r
                }\r
 \r
-               if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, i)) {\r
+               if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, i,downlink_mode)) {\r
                        PrintAndLog("Aquireing data from device failed. Quitting");\r
                        free(keyBlock);\r
                        return 0;\r
@@ -1547,6 +1609,239 @@ int CmdT55xxBruteForce(const char *Cmd) {
        return 0;\r
 }\r
 \r
+int CmdT55xxBruteForce_downlink(const char *Cmd) {\r
+\r
+       // load a default pwd file.\r
+       char buf[9];\r
+       char filename[FILE_PATH_SIZE]={0};\r
+       int keycnt = 0;\r
+       uint8_t downlink_mode = 0;\r
+       int ch;\r
+       uint8_t stKeyBlock = 20;\r
+       uint8_t *keyBlock = NULL, *p = NULL;\r
+       uint32_t start_password = 0x00000000; //start password\r
+       uint32_t end_password   = 0xFFFFFFFF; //end   password\r
+       bool found = false;\r
+       uint8_t cmdp = 0;\r
+       int     cmd_offset = 0;\r
+       int errors = 0;\r
+       int len;\r
+       bool use_file = false;\r
+       bool use_range = false;\r
+       bool try_all_dl_modes = false;\r
+       uint8_t dl_mode = 0;\r
+       \r
+       keyBlock = calloc(stKeyBlock, 6);\r
+       if (keyBlock == NULL) return 1;\r
+\r
+       PrintAndLog("New Downlink Supprt");\r
+\r
+       while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {\r
+               switch(param_getchar(Cmd, cmdp)) {\r
+               case 'h':\r
+               case 'H':\r
+                                       return usage_t55xx_bruteforce_downlink();\r
+               case 'e':\r
+               case 'E':\r
+                                       downlink_mode = param_getchar(Cmd, cmdp+1) - '0';\r
+                                       if (downlink_mode == 4) try_all_dl_modes = true;\r
+                                       if (downlink_mode > 3) downlink_mode = 0;\r
+                                       cmdp +=2;\r
+                                       cmd_offset += 4;\r
+                                       PrintAndLog ("DL Mode : %d",downlink_mode);\r
+                                       break;\r
+               case 'i':\r
+               case 'I':\r
+                                       if (use_range) {\r
+                                               PrintAndLog ("use Range or File");\r
+                                               return 0;\r
+                                       }\r
+                                       use_file = true;\r
+                                       len = strlen(Cmd+2);\r
+                                       if (len > FILE_PATH_SIZE) len = FILE_PATH_SIZE;\r
+                                       memcpy(filename, Cmd+cmd_offset+2, len);\r
+                                       cmdp += 2;\r
+               //                      PrintAndLog (" File : [%s]",filename);\r
+                                       break;\r
+               case 'r':\r
+               case 'R':\r
+                                       if (use_file) {\r
+                                               PrintAndLog ("use Range or File");\r
+                                               return 0;\r
+                                       }\r
+                                       use_range       = true; // = param_get32ex(Cmd, cmdp+1, 0, 16);\r
+                                       start_password  = param_get32ex(Cmd, cmdp+1, 0, 16);\r
+                                       end_password    = param_get32ex(Cmd, cmdp+2, 0, 16);\r
+                                       cmdp += 3;\r
+                                       cmd_offset += 20; // 8 + 8 + 1 + 1 + 1\r
+               //                      PrintAndLog (" Range : [%0X] - [%0X]",start_password,end_password);\r
+                                       break;\r
+               default:\r
+                       PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
+                       errors = true;\r
+                       break;\r
+               }\r
+       }\r
+\r
+\r
+//     if (cmdp == 'i' || cmdp == 'I') {\r
+\r
+       if (use_file)\r
+       {\r
+                               FILE * f = fopen( filename , "r");\r
+\r
+                               if ( !f ) {\r
+                                       PrintAndLog("File: %s: not found or locked.", filename);\r
+                                       free(keyBlock);\r
+                                       return 1;\r
+                               }\r
+\r
+                               while( fgets(buf, sizeof(buf), f) ) {\r
+                                       if (strlen(buf) < 8 || buf[7] == '\n') continue;\r
+\r
+                                       while (fgetc(f) != '\n' && !feof(f)) ;  //goto next line\r
+\r
+                                       //The line start with # is comment, skip\r
+                                       if( buf[0]=='#' ) continue;\r
+\r
+                                       if (!isxdigit((unsigned char)buf[0])) {\r
+                                               PrintAndLog("File content error. '%s' must include 8 HEX symbols", buf);\r
+                                               continue;\r
+                                       }\r
+                       \r
+                                       buf[8] = 0;\r
+\r
+                                       if ( stKeyBlock - keycnt < 2) {\r
+                                               p = realloc(keyBlock, 6*(stKeyBlock+=10));\r
+                                               if (!p) {\r
+                                                       PrintAndLog("Cannot allocate memory for defaultKeys");\r
+                                                       free(keyBlock);\r
+                                                       fclose(f);\r
+                                                       return 2;\r
+                                               }\r
+                                               keyBlock = p;\r
+                                       }\r
+                                       memset(keyBlock + 4 * keycnt, 0, 4);\r
+                                       num_to_bytes(strtoll(buf, NULL, 16), 4, keyBlock + 4*keycnt);\r
+                                       PrintAndLog("chk custom pwd[%2d] %08X", keycnt, bytes_to_num(keyBlock + 4*keycnt, 4));\r
+                                       keycnt++;\r
+                                       memset(buf, 0, sizeof(buf));\r
+                               }\r
+                               fclose(f);\r
+               \r
+                               if (keycnt == 0) {\r
+                                       PrintAndLog("No keys found in file");\r
+                                       free(keyBlock);\r
+                                       return 1;\r
+                               }\r
+                               PrintAndLog("Loaded %d keys", keycnt);\r
+               \r
+               // loop\r
+               uint64_t testpwd = 0x00;\r
+               for (uint16_t c = 0; c < keycnt; ++c ) {\r
+\r
+                       if (ukbhit()) {\r
+                               ch = getchar();\r
+                               (void)ch;\r
+                               printf("\naborted via keyboard!\n");\r
+                               free(keyBlock);\r
+                               return 0;\r
+                       }\r
+\r
+                       testpwd = bytes_to_num(keyBlock + 4*c, 4);\r
+\r
+                       PrintAndLog("Testing %08X", testpwd);\r
+            \r
+                       // Try each downlink_mode of asked to \r
+                       // donwlink_mode will = 0 if > 3 or set to 0, so loop from 0 - 3\r
+                       for (dl_mode = downlink_mode; dl_mode <= 3; dl_mode++)\r
+                       {\r
+                               if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, testpwd,dl_mode)) {\r
+                                       PrintAndLog("Aquireing data from device failed. Quitting");\r
+                                       free(keyBlock);\r
+                                       return 0;\r
+                               }\r
+\r
+                               found = tryDetectModulation();\r
+\r
+                               if ( found ) {\r
+                                       PrintAndLog("Found valid password: [%08X]", testpwd);\r
+                                       free(keyBlock);\r
+                                                       // Add downlink mode to reference.\r
+                                       switch (dl_mode) {\r
+                                               case  0 :       PrintAndLog ("Downlink   : e 0 - Default/Fixed Bit Length"); break;\r
+                                               case  1 :   PrintAndLog ("Downlink   : e 1 - Long Leading Reference"); break;\r
+                                               case  2 :   PrintAndLog ("Downlink   : e 2 - Leading Zero Reference"); break;\r
+                                               case  3 :   PrintAndLog ("Downlink   : e 3 - 1 of 4 Coding"); break;\r
+                                       }\r
+                               return 0;\r
+                               }\r
+                               if (!try_all_dl_modes) // Exit loop\r
+                                       dl_mode = 4;\r
+                       }\r
+               }\r
+               PrintAndLog("Password NOT found.");\r
+               free(keyBlock);\r
+               return 0;\r
+       }\r
+\r
+       if (use_range)\r
+       {\r
+               // incremental pwd range search\r
+       //      start_password = param_get32ex(Cmd, 0, 0, 16);\r
+       //      end_password = param_get32ex(Cmd, 1, 0, 16);\r
+\r
+               if ( start_password >= end_password ) {\r
+                       free(keyBlock);\r
+                       return usage_t55xx_bruteforce_downlink();\r
+               }\r
+               PrintAndLog("Search password range [%08X -> %08X]", start_password, end_password);\r
+\r
+               uint32_t i = start_password;\r
+\r
+               while ((!found) && (i <= end_password)) {\r
+\r
+                       printf(".");\r
+                       fflush(stdout);\r
+                       if (ukbhit()) {\r
+                               ch = getchar();\r
+                               (void)ch;\r
+                               printf("\naborted via keyboard!\n");\r
+                               free(keyBlock);\r
+                               return 0;\r
+                       }\r
+\r
+                       if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, i,downlink_mode)) {\r
+                               PrintAndLog("Aquireing data from device failed. Quitting");\r
+                               free(keyBlock);\r
+                               return 0;\r
+                       }\r
+                       found = tryDetectModulation();\r
+\r
+                       if (found) break;\r
+                       i++;\r
+               }\r
+\r
+               PrintAndLog("");\r
+       \r
+               if (found) {\r
+                       PrintAndLog("Found valid password: [%08x]", i);\r
+                                       // Add downlink mode to reference.\r
+                       switch (downlink_mode) {\r
+                               case  0 :       PrintAndLog ("Downlink   : e 0 - Default/Fixed Bit Length"); break;\r
+                               case  1 :   PrintAndLog ("Downlink   : e 1 - Long Leading Reference"); break;\r
+                               case  2 :   PrintAndLog ("Downlink   : e 2 - Leading Zero Reference"); break;\r
+                               case  3 :   PrintAndLog ("Downlink   : e 3 - 1 of 4 Coding"); break;\r
+                       }\r
+               }\r
+               else\r
+                       PrintAndLog("Password NOT found. Last tried: [%08x]", --i);\r
+\r
+               free(keyBlock);\r
+       }\r
+       return 0;\r
+}\r
+\r
 // note length of data returned is different for different chips.  \r
 //   some return all page 1 (64 bits) and others return just that block (32 bits) \r
 //   unfortunately the 64 bits makes this more likely to get a false positive...\r
@@ -1558,7 +1853,7 @@ bool tryDetectP1(bool getData) {
        bool st = true;\r
 \r
        if ( getData ) {\r
-               if ( !AquireData(T55x7_PAGE1, 1, false, 0) )\r
+               if ( !AquireData(T55x7_PAGE1, 1, false, 0,0) )\r
                        return false;\r
        }\r
 \r
@@ -1687,7 +1982,7 @@ int CmdT55xxDetectPage1(const char *Cmd){
        if (errors) return usage_t55xx_detectP1();\r
 \r
        if ( !useGB ) {\r
-               if ( !AquireData(T55x7_PAGE1, 1, usepwd, password) )\r
+               if ( !AquireData(T55x7_PAGE1, 1, usepwd, password,0) )\r
                        return false;\r
        }\r
        bool success = tryDetectP1(false);\r
@@ -1697,7 +1992,8 @@ int CmdT55xxDetectPage1(const char *Cmd){
 \r
 static command_t CommandTable[] = {\r
   {"help",      CmdHelp,           1, "This help"},\r
-       {"bruteforce",CmdT55xxBruteForce,0, "<start password> <end password> [i <*.dic>] Simple bruteforce attack to find password"},\r
+  {"bruteforce",CmdT55xxBruteForce,0, "<start password> <end password> [i <*.dic>] Simple bruteforce attack to find password"},\r
+  {"bruteforcedl",CmdT55xxBruteForce_downlink,0, "r <start password> <end password> [i <*.dic>] [e <downlink>] Simple bruteforce attack to find password"},\r
   {"config",    CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"},\r
   {"detect",    CmdT55xxDetect,    1, "[1] Try detecting the tag modulation from reading the configuration block."},\r
   {"p1detect",  CmdT55xxDetectPage1,1, "[1] Try detecting if this is a t55xx tag by reading page 1"},\r
index 2ae3e69b571f0b11cd8d927fbec2dedac83080ac..1ba4dca409ac1c641af20f9926d2a786ff2b5bb3 100644 (file)
@@ -74,6 +74,7 @@ void Set_t55xx_Config(t55xx_conf_block_t conf);
 \r
 extern int CmdLFT55XX(const char *Cmd);\r
 extern int CmdT55xxBruteForce(const char *Cmd);\r
+extern int CmdT55xxBruteForce_downlink(const char *Cmd);\r
 extern int CmdT55xxSetConfig(const char *Cmd);\r
 extern int CmdT55xxReadBlock(const char *Cmd);\r
 extern int CmdT55xxWriteBlock(const char *Cmd);\r
@@ -98,7 +99,7 @@ bool tryDetectModulation(void);
 extern bool tryDetectP1(bool getData);\r
 bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5);\r
 int special(const char *Cmd);\r
-int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password );\r
+int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password,uint8_t downlink_mode );\r
 \r
 void printT55x7Trace( t55x7_tracedata_t data, uint8_t repeat );\r
 void printT5555Trace( t5555_tracedata_t data, uint8_t repeat );\r
Impressum, Datenschutz