cvs.zerfleddert.de Git - raggedstone/blob - dhwk/source/pci/config_10h.vhd

   1 -- J.STELZNER
   2 -- INFORMATIK-3 LABOR
   3 -- 23.08.2006
   4 -- File: CONFIG_10H.VHD
   5
   6 library IEEE;
   7 use IEEE.std_logic_1164.all;
   8
   9 entity CONFIG_10H is
  10         port
  11         (
  12                 PCI_CLOCK :in std_logic;
  13                 PCI_RSTn :in std_logic;
  14                 AD_REG :in std_logic_vector(31 downto 0);
  15                 CBE_REGn :in std_logic_vector( 3 downto 0);
  16                 CONF_WR_10H :in std_logic;
  17                 CONF_DATA_10H :out std_logic_vector(31 downto 0)
  18         );
  19 end entity CONFIG_10H;
  20
  21 architecture CONFIG_10H_DESIGN of CONFIG_10H is
  22
  23         signal CONF_BAS_ADDR_REG :std_logic_vector(31 downto 0);
  24
  25 begin
  26
  27  --*******************************************************************
  28  --***** PCI Configuration Space Header "BASE ADDRESS REGISTER" ******
  29  --*******************************************************************
  30
  31         CONF_BAS_ADDR_REG(1 downto 0) <= "01";-- Base Address Register for "I/O"
  32         CONF_BAS_ADDR_REG(3 downto 2) <= "00";-- IO Bereich = 16 BYTE
  33
  34         process (PCI_CLOCK,PCI_RSTn)
  35         begin
  36
  37  -- if PCI_RSTn = '0' then CONF_BAS_ADDR_REG(31 downto 2) <= (others =>'0');
  38         if PCI_RSTn = '0' then
  39                 CONF_BAS_ADDR_REG(31 downto 4) <= (others =>'0');
  40
  41         elsif (PCI_CLOCK'event and PCI_CLOCK = '1') then
  42
  43                 if CONF_WR_10H = '1'and CBE_REGn(3) = '0' then
  44                         CONF_BAS_ADDR_REG(31 downto 24) <= AD_REG(31 downto 24);
  45                 else
  46                         CONF_BAS_ADDR_REG(31 downto 24) <= CONF_BAS_ADDR_REG(31 downto 24);
  47                 end if;
  48
  49                 if CONF_WR_10H = '1'and CBE_REGn(2) = '0' then
  50                         CONF_BAS_ADDR_REG(23 downto 16) <= AD_REG(23 downto 16);
  51                 else
  52                         CONF_BAS_ADDR_REG(23 downto 16) <= CONF_BAS_ADDR_REG(23 downto 16);
  53                 end if;
  54
  55                 if CONF_WR_10H = '1'and CBE_REGn(1) = '0' then
  56                         CONF_BAS_ADDR_REG(15 downto 8) <= AD_REG(15 downto 8);
  57                 else
  58                         CONF_BAS_ADDR_REG(15 downto 8) <= CONF_BAS_ADDR_REG(15 downto 8);
  59                 end if;
  60
  61                 -- if CONF_WR_10H = '1'and CBE_REGn(0) = '0' then
  62                 --         CONF_BAS_ADDR_REG( 7 downto 2) <= AD_REG( 7 downto 2);
  63                 -- else
  64                 --         CONF_BAS_ADDR_REG( 7 downto 2) <= CONF_BAS_ADDR_REG( 7 downto 2);
  65                 -- end if;
  66
  67                 if CONF_WR_10H = '1'and CBE_REGn(0) = '0' then
  68                         CONF_BAS_ADDR_REG( 7 downto 4) <= AD_REG( 7 downto 4);
  69                 else
  70                         CONF_BAS_ADDR_REG( 7 downto 4) <= CONF_BAS_ADDR_REG( 7 downto 4);
  71                 end if;
  72         end if;
  73 end process;
  74
  75 CONF_DATA_10H <= CONF_BAS_ADDR_REG;
  76
  77 end architecture CONFIG_10H_DESIGN;