cvs.zerfleddert.de Git - raggedstone/blob - ethernet/source/pci/pci_pci_decoder.v

   1 //////////////////////////////////////////////////////////////////////
   2 ////                                                              ////
   3 ////  File name: pci_decoder.v                                    ////
   4 ////                                                              ////
   5 ////  This file is part of the "PCI bridge" project               ////
   6 ////  http://www.opencores.org/cores/pci/                         ////
   7 ////                                                              ////
   8 ////  Author(s):                                                  ////
   9 ////      - Tadej Markovic, tadej@opencores.org                   ////
  10 ////                                                              ////
  11 ////  All additional information is avaliable in the README.txt   ////
  12 ////  file.                                                       ////
  13 ////                                                              ////
  14 ////                                                              ////
  15 //////////////////////////////////////////////////////////////////////
  16 ////                                                              ////
  17 //// Copyright (C) 2000 Tadej Markovic, tadej@opencores.org       ////
  18 ////                                                              ////
  19 //// This source file may be used and distributed without         ////
  20 //// restriction provided that this copyright statement is not    ////
  21 //// removed from the file and that any derivative work contains  ////
  22 //// the original copyright notice and the associated disclaimer. ////
  23 ////                                                              ////
  24 //// This source file is free software; you can redistribute it   ////
  25 //// and/or modify it under the terms of the GNU Lesser General   ////
  26 //// Public License as published by the Free Software Foundation; ////
  27 //// either version 2.1 of the License, or (at your option) any   ////
  28 //// later version.                                               ////
  29 ////                                                              ////
  30 //// This source is distributed in the hope that it will be       ////
  31 //// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
  32 //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
  33 //// PURPOSE.  See the GNU Lesser General Public License for more ////
  34 //// details.                                                     ////
  35 ////                                                              ////
  36 //// You should have received a copy of the GNU Lesser General    ////
  37 //// Public License along with this source; if not, download it   ////
  38 //// from http://www.opencores.org/lgpl.shtml                     ////
  39 ////                                                              ////
  40 //////////////////////////////////////////////////////////////////////
  41 //
  42 // CVS Revision History
  43 //
  44 // $Log: pci_pci_decoder.v,v $
  45 // Revision 1.1  2007-03-20 17:50:56  sithglan
  46 // add shit
  47 //
  48 // Revision 1.1  2003/01/27 16:49:31  mihad
  49 // Changed module and file names. Updated scripts accordingly. FIFO synchronizations changed.
  50 //
  51 // Revision 1.3  2002/02/01 15:25:12  mihad
  52 // Repaired a few bugs, updated specification, added test bench files and design document
  53 //
  54 // Revision 1.2  2001/10/05 08:14:28  mihad
  55 // Updated all files with inclusion of timescale file for simulation purposes.
  56 //
  57 // Revision 1.1.1.1  2001/10/02 15:33:46  mihad
  58 // New project directory structure
  59 //
  60 //
  61
  62 `include "pci_constants.v"
  63
  64 // synopsys translate_off
  65 `include "timescale.v"
  66 // synopsys translate_on
  67
  68 module pci_pci_decoder (hit, addr_out,
  69                                         addr_in, bc_in,
  70                                         base_addr, mask_addr, tran_addr, at_en,
  71                                         mem_io_space, mem_en, io_en) ;
  72
  73 // Decoding address size parameter - for FPGAs 1MegByte is recommended
  74 //   MAXIMUM is 20 (4KBytes), length 12 is 1 MByte !!!
  75 parameter               decode_len     = 12 ;
  76
  77 //###########################################################################################################
  78 // ALL COMMENTS are written as there were decode_len 20. This number and 12 (32 - 20) are assigning the
  79 // numbers of decoded and compared bits, etc.
  80 //###########################################################################################################
  81
  82 /*-----------------------------------------------------------------------------------------------------------
  83 DECODER interface decodes input address (ADDR_IN); what means that it validates (HIT), if input address
  84 falls within the defined image space boundaries. Image space boundarie is defined with image base address
  85 register (BASE_ADDR) and address mask register (MASK_ADDR).
  86 Beside that, it also translates (maps) the input address to the output address (ADDR_OUT), regarding the
  87 translation address register (TRAN_ADDR) and the address mask register.
  88 -----------------------------------------------------------------------------------------------------------*/
  89
  90 // output control
  91 output  hit ;
  92 // output address
  93 output  [31:0]  addr_out ;
  94 // input address and bus command
  95 input   [31:0]  addr_in ;
  96 input   [3:0]   bc_in ;
  97
  98 // input registers - 12 LSbits are not valid since the smallest possible size is 4KB !
  99 input   [31:(32-decode_len)]    base_addr ;
 100 input   [31:(32-decode_len)]    mask_addr ;
 101 input   [31:(32-decode_len)]    tran_addr ;
 102
 103 // input bit[2] of the Image Control register used to enable the address translation !
 104 input   at_en ;
 105
 106 // memory or io space selection and its enable signals !
 107 input   mem_io_space ;
 108 input   mem_en ;
 109 input   io_en ;
 110
 111 /*-----------------------------------------------------------------------------------------------------------
 112 Internal signals !
 113 -----------------------------------------------------------------------------------------------------------*/
 114
 115 // bit[31] if address mask register is IMAGE ENABLE bit (img_en)
 116 wire    img_en ;
 117
 118 // addr_in_compare are masked input address bits that are compared with masked base_addr
 119 wire    [31:(32-decode_len)]    addr_in_compare ;
 120 // base_addr_compare are masked base address bits that are compared with masked addr_in
 121 wire    [31:(32-decode_len)]    base_addr_compare ;
 122
 123 /*-----------------------------------------------------------------------------------------------------------
 124 Decoding the input address!
 125 This logic produces the loghest path in this module!
 126
 127 20 MSbits of input addres are as well as base address (20 bits) masked with corrected address mask. Only
 128 masked bits of each vector are actually logically compared.
 129 Bit[31] of address mask register is used to enable the image space !
 130 Because of PCI bus specifications, there is also the comparison of memory/io selection (mem_io_space) and
 131 its appropriate enable bit (mem_en / io_en).
 132 -----------------------------------------------------------------------------------------------------------*/
 133
 134 assign  addr_in_compare = (addr_in[31:(32-decode_len)] & mask_addr) ;
 135
 136 assign  base_addr_compare = (base_addr & mask_addr) ;
 137
 138 assign  img_en = mask_addr[31] ;
 139
 140 wire    addr_hit = (addr_in_compare == base_addr_compare) ;
 141
 142 wire    space_hit = (!mem_io_space && mem_en && img_en) || (mem_io_space && io_en && img_en) ;
 143
 144 reg             bc_hit ;
 145 always@(bc_in or mem_io_space)
 146 begin // Allowed bus commands for accesses through IMAGEs to WB bus - BC_CONF_WRITE/READ are not used with address claim!!!
 147         case ( {bc_in[3:1], mem_io_space} )
 148         4'b001_1,       // BC_IO_READ     or BC_IO_WRITE                and IO space
 149         4'b011_0,       // BC_MEM_READ    or BC_MEM_WRITE               and MEM space
 150         4'b110_0,       // BC_MEM_READ_MUL                                              and MEM space - BC_DUAL_ADDR_CYC must NOT be allowed!
 151         4'b111_0:       // BC_MEM_READ_LN or BC_MEM_WRITE_INVAL and MEM space
 152                 bc_hit <= 1'b1 ;
 153         default:
 154                 bc_hit <= 1'b0 ;
 155         endcase
 156 end
 157
 158 wire    bc_forbid = bc_in[3] && bc_in[2] && !bc_in[1] && bc_in[0] ; // BC_DUAL_ADDR_CYC must NOT be allowed!
 159
 160
 161 assign  hit = (addr_hit && space_hit && bc_hit && !bc_forbid) ;
 162
 163 /*-----------------------------------------------------------------------------------------------------------
 164 Translating the input address!
 165
 166 Translation of input address is not implemented if ADDR_TRAN_IMPL is not defined
 167
 168 20 MSbits of input address are masked with negated value of the corrected address mask in order to get
 169 address bits of the input address which won't be replaced with translation address bits.
 170 Translation address bits (20 bits) are masked with corrected address mask. Only masked bits of vector are
 171 actually valid, all others are zero.
 172 Boath vectors are bit-wise ORed in order to get the valid translation address with an offset of an input
 173 address.
 174 12 LSbits of an input address are assigned to 12 LSbits of an output addres.
 175 -----------------------------------------------------------------------------------------------------------*/
 176
 177 `ifdef ADDR_TRAN_IMPL
 178     // if Address Translation Enable bit is set, then translation address is used othervise input address is used!
 179     // addr_in_combine input address bits are not replaced with translation address!
 180     wire        [31:(32-decode_len)] addr_in_combine ;
 181     // tran_addr_combine are masked and combined with addr_in_combine!
 182     reg         [31:(32-decode_len)] tran_addr_combine ;
 183
 184     assign addr_in_combine = (addr_in[31:(32-decode_len)] & ~mask_addr) ;
 185     always@(at_en or tran_addr or mask_addr or addr_in)
 186         begin
 187             if (at_en)
 188                         begin
 189                                 tran_addr_combine <= (tran_addr & mask_addr) ;
 190                 end
 191         else
 192                         begin
 193                                 tran_addr_combine <= (addr_in[31:(32-decode_len)] & mask_addr) ;
 194                         end
 195         end
 196
 197     assign addr_out[31:(32-decode_len)] = (addr_in_combine | tran_addr_combine) ;
 198     assign addr_out[(31-decode_len):0] = addr_in [(31-decode_len):0] ;
 199 `else
 200     assign addr_out = addr_in ;
 201 `endif
 202
 203 endmodule
 204