+++ /dev/null
--- J.STELZNER
--- INFORMATIK-3 LABOR
--- 23.08.2006
--- File: CONFIG_04H.VHD
-
-library IEEE;
-use IEEE.std_logic_1164.all;
-
-entity CONFIG_04H is
- port
- (
- PCI_CLOCK :in std_logic;
- PCI_RSTn :in std_logic;
- SERR :in std_logic;
- PERR :in std_logic;
- AD_REG :in std_logic_vector(31 downto 0);
- CBE_REGn :in std_logic_vector( 3 downto 0);
- CONF_WR_04H :in std_logic;
- CONF_DATA_04H :out std_logic_vector(31 downto 0)
- );
-end entity CONFIG_04H;
-
-architecture CONFIG_04H_DESIGN of CONFIG_04H is
-
- signal CONF_STATUS :std_logic_vector(31 downto 16);
- signal CONF_COMMAND :std_logic_vector(15 downto 0);
-
-begin
-
- --*******************************************************************
- --************* PCI Configuration Space Header "STATUS" *************
- --*******************************************************************
-
- CONF_STATUS(20 downto 16) <= "00000";-- Reserved
- CONF_STATUS(21 ) <= '0';-- MAS/TAR: "R_O" :'0'= 33MHz / '1'= 66MHz
- CONF_STATUS(22 ) <= '0';-- MAS/TAR: "R_O"
- CONF_STATUS(23 ) <= '0';-- ???/???: "R_O" : fast back-to-back
- CONF_STATUS(24 ) <= '0';-- Master :
- --CONF_STATUS(26 downto 25) <= "00";-- Mas/Tar: "R_O" : timing fast for "DEVSEL"
- CONF_STATUS(26 downto 25) <= "01";-- Mas/Tar: "R_O" : timing medium for "DEVSEL"
- --CONF_STATUS(26 downto 25) <= "10";-- Mas/Tar: "R_O" : timing slow for "DEVSEL"
- --CONF_STATUS(26 downto 25) <= "11";-- Mas/Tar: "R_O" : reserved
- CONF_STATUS(27 ) <= '0';-- Target : "R_W" : Taget-Abort
- CONF_STATUS(28 ) <= '0';-- Master : "R_W" : Taget-Abort
- CONF_STATUS(29 ) <= '0';-- Master : "R_W" : Master-Abort
- --CONF_STATUS(30 ) <= SERR;-- Mas/Tar: "R_W" : SERR
- --CONF_STATUS(31 ) <= PERR;-- Mas/Tar: "R_W" : PERR
-
- process (PCI_CLOCK,PCI_RSTn)
- begin
- if PCI_RSTn = '0' then
- CONF_STATUS(30) <= '0';
- CONF_STATUS(31) <= '0';
-
- elsif (rising_edge(PCI_CLOCK)) then
- if CONF_WR_04H = '1' and CBE_REGn(3) = '0' then
- CONF_STATUS(30) <= not (AD_REG(30) and CONF_STATUS(30));
- CONF_STATUS(31) <= not (AD_REG(31) and CONF_STATUS(31));
-
- else
- CONF_STATUS(30) <= SERR or CONF_STATUS(30);
- CONF_STATUS(31) <= PERR or CONF_STATUS(31);
-
- end if;
- end if;
-end process;
-
- --*******************************************************************
- --*********** PCI Configuration Space Header "COMMAND" **************
- --*******************************************************************
-
--- CONF_COMMAND( 0) <= '0';-- I/O Space accesses ???
--- CONF_COMMAND( 1) <= '0';-- Mem Space accesses ???
--- CONF_COMMAND( 2) <= '0';-- abillity to act as a master on the PCI bus
--- CONF_COMMAND( 3) <= '0';-- Special Cycle ???
--- CONF_COMMAND( 4) <= '0';-- Master ???
--- CONF_COMMAND( 5) <= '0';-- VGA ???
--- CONF_COMMAND( 6) <= '0';-- Party checking enable/disable
-CONF_COMMAND( 7) <= '0';-- address/data stepping ???
--- CONF_COMMAND( 8) <= '0';-- enable/disable "PCI_SERRn"
--- CONF_COMMAND( 9) <= '0';-- fast back-to-back
--- CONF_COMMAND(10) <= '0';-- Reserved
--- CONF_COMMAND(11) <= '0';-- Reserved
--- CONF_COMMAND(12) <= '0';-- Reserved
--- CONF_COMMAND(13) <= '0';-- Reserved
--- CONF_COMMAND(14) <= '0';-- Reserved
--- CONF_COMMAND(15) <= '0';-- Reserved
-
-process (PCI_CLOCK,PCI_RSTn)
-begin
- if PCI_RSTn = '0' then
- CONF_COMMAND(15 downto 8) <= (others =>'0');
- CONF_COMMAND( 6 downto 0) <= (others =>'0');
-
- elsif (rising_edge(PCI_CLOCK)) then
-
- if CONF_WR_04H = '1'and CBE_REGn(1) = '0' then
- CONF_COMMAND(15 downto 8) <= AD_REG(15 downto 8);
- else
- CONF_COMMAND(15 downto 8) <= CONF_COMMAND(15 downto 8);
- end if;
-
- if CONF_WR_04H = '1'and CBE_REGn(0) = '0' then
- CONF_COMMAND( 6 downto 0) <= AD_REG( 6 downto 0);
- else
- CONF_COMMAND( 6 downto 0) <= CONF_COMMAND( 6 downto 0);
- end if;
- end if;
-end process;
-
-CONF_DATA_04H <= CONF_STATUS & CONF_COMMAND;
-
-end architecture CONFIG_04H_DESIGN;
signal CONF_BAS_ADDR_REG :std_logic_vector(31 downto 0);
+ signal CONF_STATUS :std_logic_vector(31 downto 16);
+ signal CONF_COMMAND :std_logic_vector(15 downto 0);
+
SIGNAL gnd : std_logic := '0';
SIGNAL vcc : std_logic := '1';
CONF_WR_3CH : Out std_logic );
end component;
- component CONFIG_04H
- Port ( AD_REG : In std_logic_vector (31 downto 0);
- CBE_REGn : In std_logic_vector (3 downto 0);
- CONF_WR_04H : In std_logic;
- PCI_CLOCK : In std_logic;
- PCI_RSTn : In std_logic;
- PERR : In std_logic;
- SERR : In std_logic;
- CONF_DATA_04H : Out std_logic_vector (31 downto 0) );
- end component;
-
begin
CONF_DATA_00H <= CONF_DEVICE_ID & VENDOR_ID;
CONF_DATA_08H <= CONF_CLASS_CODE & REVISION_ID;
-
- CONF_DATA_04H <= CONF_DATA_04H_DUMMY;
+ CONF_DATA_04H <= CONF_STATUS & CONF_COMMAND;
CONF_MAX_LAT <= X"00";
CONF_MIN_GNT <= X"00";
CF_WR_COM=>CF_WR_COM, IRDY_REGn=>IRDY_REGn,
TRDYn=>TRDYn, CONF_WR_04H=>CONF_WR_04H,
CONF_WR_10H=>CONF_WR_10H, CONF_WR_3CH=>CONF_WR_3CH );
- I2 : CONFIG_04H
- Port Map ( AD_REG(31 downto 0)=>AD_REG(31 downto 0),
- CBE_REGn(3 downto 0)=>CBE_REGn(3 downto 0),
- CONF_WR_04H=>CONF_WR_04H, PCI_CLOCK=>PCI_CLOCK,
- PCI_RSTn=>PCI_RSTn, PERR=>PERR, SERR=>SERR,
- CONF_DATA_04H(31 downto 0)=>CONF_DATA_04H_DUMMY(31 downto 0) );
process (PCI_CLOCK,PCI_RSTn)
begin
end if;
end if;
end process;
+
+ --*******************************************************************
+ --************* PCI Configuration Space Header "STATUS" *************
+ --*******************************************************************
+
+ CONF_STATUS(20 downto 16) <= "00000";-- Reserved
+ CONF_STATUS(21 ) <= '0';-- MAS/TAR: "R_O" :'0'= 33MHz / '1'= 66MHz
+ CONF_STATUS(22 ) <= '0';-- MAS/TAR: "R_O"
+ CONF_STATUS(23 ) <= '0';-- ???/???: "R_O" : fast back-to-back
+ CONF_STATUS(24 ) <= '0';-- Master :
+ --CONF_STATUS(26 downto 25) <= "00";-- Mas/Tar: "R_O" : timing fast for "DEVSEL"
+ CONF_STATUS(26 downto 25) <= "01";-- Mas/Tar: "R_O" : timing medium for "DEVSEL"
+ --CONF_STATUS(26 downto 25) <= "10";-- Mas/Tar: "R_O" : timing slow for "DEVSEL"
+ --CONF_STATUS(26 downto 25) <= "11";-- Mas/Tar: "R_O" : reserved
+ CONF_STATUS(27 ) <= '0';-- Target : "R_W" : Taget-Abort
+ CONF_STATUS(28 ) <= '0';-- Master : "R_W" : Taget-Abort
+ CONF_STATUS(29 ) <= '0';-- Master : "R_W" : Master-Abort
+ --CONF_STATUS(30 ) <= SERR;-- Mas/Tar: "R_W" : SERR
+ --CONF_STATUS(31 ) <= PERR;-- Mas/Tar: "R_W" : PERR
+
+ process (PCI_CLOCK,PCI_RSTn)
+ begin
+ if PCI_RSTn = '0' then
+ CONF_STATUS(30) <= '0';
+ CONF_STATUS(31) <= '0';
+
+ elsif (rising_edge(PCI_CLOCK)) then
+ if CONF_WR_04H = '1' and CBE_REGn(3) = '0' then
+ CONF_STATUS(30) <= not (AD_REG(30) and CONF_STATUS(30));
+ CONF_STATUS(31) <= not (AD_REG(31) and CONF_STATUS(31));
+
+ else
+ CONF_STATUS(30) <= SERR or CONF_STATUS(30);
+ CONF_STATUS(31) <= PERR or CONF_STATUS(31);
+
+ end if;
+ end if;
+ end process;
+
+ --*******************************************************************
+ --*********** PCI Configuration Space Header "COMMAND" **************
+ --*******************************************************************
+
+ -- CONF_COMMAND( 0) <= '0';-- I/O Space accesses ???
+ -- CONF_COMMAND( 1) <= '0';-- Mem Space accesses ???
+ -- CONF_COMMAND( 2) <= '0';-- abillity to act as a master on the PCI bus
+ -- CONF_COMMAND( 3) <= '0';-- Special Cycle ???
+ -- CONF_COMMAND( 4) <= '0';-- Master ???
+ -- CONF_COMMAND( 5) <= '0';-- VGA ???
+ -- CONF_COMMAND( 6) <= '0';-- Party checking enable/disable
+ CONF_COMMAND( 7) <= '0';-- address/data stepping ???
+ -- CONF_COMMAND( 8) <= '0';-- enable/disable "PCI_SERRn"
+ -- CONF_COMMAND( 9) <= '0';-- fast back-to-back
+ -- CONF_COMMAND(10) <= '0';-- Reserved
+ -- CONF_COMMAND(11) <= '0';-- Reserved
+ -- CONF_COMMAND(12) <= '0';-- Reserved
+ -- CONF_COMMAND(13) <= '0';-- Reserved
+ -- CONF_COMMAND(14) <= '0';-- Reserved
+ -- CONF_COMMAND(15) <= '0';-- Reserved
+
+ process (PCI_CLOCK,PCI_RSTn)
+ begin
+ if PCI_RSTn = '0' then
+ CONF_COMMAND(15 downto 8) <= (others =>'0');
+ CONF_COMMAND( 6 downto 0) <= (others =>'0');
+
+ elsif (rising_edge(PCI_CLOCK)) then
+
+ if CONF_WR_04H = '1'and CBE_REGn(1) = '0' then
+ CONF_COMMAND(15 downto 8) <= AD_REG(15 downto 8);
+ else
+ CONF_COMMAND(15 downto 8) <= CONF_COMMAND(15 downto 8);
+ end if;
+
+ if CONF_WR_04H = '1'and CBE_REGn(0) = '0' then
+ CONF_COMMAND( 6 downto 0) <= AD_REG( 6 downto 0);
+ else
+ CONF_COMMAND( 6 downto 0) <= CONF_COMMAND( 6 downto 0);
+ end if;
+ end if;
+ end process;
end SCHEMATIC;