--- /dev/null
+/////////////////////////////////////////////////////////////////////
+//// ////
+//// Universal FIFO Single Clock ////
+//// ////
+//// ////
+//// Author: Rudolf Usselmann ////
+//// rudi@asics.ws ////
+//// ////
+//// ////
+//// D/L from: http://www.opencores.org/cores/generic_fifos/ ////
+//// ////
+/////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2000-2002 Rudolf Usselmann ////
+//// www.asics.ws ////
+//// rudi@asics.ws ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer.////
+//// ////
+//// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY ////
+//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED ////
+//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ////
+//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR ////
+//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, ////
+//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ////
+//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE ////
+//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR ////
+//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ////
+//// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ////
+//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT ////
+//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ////
+//// POSSIBILITY OF SUCH DAMAGE. ////
+//// ////
+/////////////////////////////////////////////////////////////////////
+
+// CVS Log
+//
+// $Id: generic_fifo_sc_a.v,v 1.1 2007-02-11 21:58:30 sithglan Exp $
+//
+// $Date: 2007-02-11 21:58:30 $
+// $Revision: 1.1 $
+// $Author: sithglan $
+// $Locker: $
+// $State: Exp $
+//
+// Change History:
+// $Log: generic_fifo_sc_a.v,v $
+// Revision 1.1 2007-02-11 21:58:30 sithglan
+// += fifo
+//
+// Revision 1.1.1.1 2002/09/25 05:42:06 rudi
+// Initial Checkin
+//
+//
+//
+//
+//
+//
+//
+//
+//
+//
+//
+
+`include "timescale.v"
+
+/*
+
+Description
+===========
+
+I/Os
+----
+rst low active, either sync. or async. master reset (see below how to select)
+clr synchronous clear (just like reset but always synchronous), high active
+re read enable, synchronous, high active
+we read enable, synchronous, high active
+din Data Input
+dout Data Output
+
+full Indicates the FIFO is full (combinatorial output)
+full_r same as above, but registered output (see note below)
+empty Indicates the FIFO is empty
+empty_r same as above, but registered output (see note below)
+
+full_n Indicates if the FIFO has space for N entries (combinatorial output)
+full_n_r same as above, but registered output (see note below)
+empty_n Indicates the FIFO has at least N entries (combinatorial output)
+empty_n_r same as above, but registered output (see note below)
+
+level indicates the FIFO level:
+ 2'b00 0-25% full
+ 2'b01 25-50% full
+ 2'b10 50-75% full
+ 2'b11 %75-100% full
+
+combinatorial vs. registered status outputs
+-------------------------------------------
+Both the combinatorial and registered status outputs have exactly the same
+synchronous timing. Meaning they are being asserted immediately at the clock
+edge after the last read or write. The combinatorial outputs however, pass
+through several levels of logic before they are output. The registered status
+outputs are direct outputs of a flip-flop. The reason both are provided, is
+that the registered outputs require quite a bit of additional logic inside
+the FIFO. If you can meet timing of your device with the combinatorial
+outputs, use them ! The FIFO will be smaller. If the status signals are
+in the critical pass, use the registered outputs, they have a much smaller
+output delay (actually only Tcq).
+
+Parameters
+----------
+The FIFO takes 3 parameters:
+dw Data bus width
+aw Address bus width (Determines the FIFO size by evaluating 2^aw)
+n N is a second status threshold constant for full_n and empty_n
+ If you have no need for the second status threshold, do not
+ connect the outputs and the logic should be removed by your
+ synthesis tool.
+
+Synthesis Results
+-----------------
+In a Spartan 2e a 8 bit wide, 8 entries deep FIFO, takes 85 LUTs and runs
+at about 116 MHz (IO insertion disabled). The registered status outputs
+are valid after 2.1NS, the combinatorial once take out to 6.5 NS to be
+available.
+
+
+Misc
+----
+This design assumes you will do appropriate status checking externally.
+
+IMPORTANT ! writing while the FIFO is full or reading while the FIFO is
+empty will place the FIFO in an undefined state.
+
+*/
+
+
+// Selecting Sync. or Async Reset
+// ------------------------------
+// Uncomment one of the two lines below. The first line for
+// synchronous reset, the second for asynchronous reset
+
+`define SC_FIFO_ASYNC_RESET // Uncomment for Syncr. reset
+//`define SC_FIFO_ASYNC_RESET or negedge rst // Uncomment for Async. reset
+
+
+module generic_fifo_sc_a(clk, rst, clr, din, we, dout, re,
+ full, empty, full_r, empty_r,
+ full_n, empty_n, full_n_r, empty_n_r,
+ level);
+
+parameter dw=8;
+parameter aw=8;
+parameter n=32;
+parameter max_size = 1<<aw;
+
+input clk, rst, clr;
+input [dw-1:0] din;
+input we;
+output [dw-1:0] dout;
+input re;
+output full, full_r;
+output empty, empty_r;
+output full_n, full_n_r;
+output empty_n, empty_n_r;
+output [1:0] level;
+
+////////////////////////////////////////////////////////////////////
+//
+// Local Wires
+//
+
+reg [aw-1:0] wp;
+wire [aw-1:0] wp_pl1;
+wire [aw-1:0] wp_pl2;
+reg [aw-1:0] rp;
+wire [aw-1:0] rp_pl1;
+reg full_r;
+reg empty_r;
+reg gb;
+reg gb2;
+reg [aw:0] cnt;
+wire full_n, empty_n;
+reg full_n_r, empty_n_r;
+
+////////////////////////////////////////////////////////////////////
+//
+// Memory Block
+//
+
+generic_dpram #(aw,dw) u0(
+ .rclk( clk ),
+ .rrst( !rst ),
+ .rce( 1'b1 ),
+ .oe( 1'b1 ),
+ .raddr( rp ),
+ .do( dout ),
+ .wclk( clk ),
+ .wrst( !rst ),
+ .wce( 1'b1 ),
+ .we( we ),
+ .waddr( wp ),
+ .di( din )
+ );
+
+////////////////////////////////////////////////////////////////////
+//
+// Misc Logic
+//
+
+always @(posedge clk `SC_FIFO_ASYNC_RESET)
+ if(!rst) wp <= #1 {aw{1'b0}};
+ else
+ if(clr) wp <= #1 {aw{1'b0}};
+ else
+ if(we) wp <= #1 wp_pl1;
+
+assign wp_pl1 = wp + { {aw-1{1'b0}}, 1'b1};
+assign wp_pl2 = wp + { {aw-2{1'b0}}, 2'b10};
+
+always @(posedge clk `SC_FIFO_ASYNC_RESET)
+ if(!rst) rp <= #1 {aw{1'b0}};
+ else
+ if(clr) rp <= #1 {aw{1'b0}};
+ else
+ if(re) rp <= #1 rp_pl1;
+
+assign rp_pl1 = rp + { {aw-1{1'b0}}, 1'b1};
+
+////////////////////////////////////////////////////////////////////
+//
+// Combinatorial Full & Empty Flags
+//
+
+assign empty = ((wp == rp) & !gb);
+assign full = ((wp == rp) & gb);
+
+// Guard Bit ...
+always @(posedge clk `SC_FIFO_ASYNC_RESET)
+ if(!rst) gb <= #1 1'b0;
+ else
+ if(clr) gb <= #1 1'b0;
+ else
+ if((wp_pl1 == rp) & we) gb <= #1 1'b1;
+ else
+ if(re) gb <= #1 1'b0;
+
+////////////////////////////////////////////////////////////////////
+//
+// Registered Full & Empty Flags
+//
+
+// Guard Bit ...
+always @(posedge clk `SC_FIFO_ASYNC_RESET)
+ if(!rst) gb2 <= #1 1'b0;
+ else
+ if(clr) gb2 <= #1 1'b0;
+ else
+ if((wp_pl2 == rp) & we) gb2 <= #1 1'b1;
+ else
+ if((wp != rp) & re) gb2 <= #1 1'b0;
+
+always @(posedge clk `SC_FIFO_ASYNC_RESET)
+ if(!rst) full_r <= #1 1'b0;
+ else
+ if(clr) full_r <= #1 1'b0;
+ else
+ if(we & ((wp_pl1 == rp) & gb2) & !re) full_r <= #1 1'b1;
+ else
+ if(re & ((wp_pl1 != rp) | !gb2) & !we) full_r <= #1 1'b0;
+
+always @(posedge clk `SC_FIFO_ASYNC_RESET)
+ if(!rst) empty_r <= #1 1'b1;
+ else
+ if(clr) empty_r <= #1 1'b1;
+ else
+ if(we & ((wp != rp_pl1) | gb2) & !re) empty_r <= #1 1'b0;
+ else
+ if(re & ((wp == rp_pl1) & !gb2) & !we) empty_r <= #1 1'b1;
+
+////////////////////////////////////////////////////////////////////
+//
+// Combinatorial Full_n & Empty_n Flags
+//
+
+assign empty_n = cnt < n;
+assign full_n = !(cnt < (max_size-n+1));
+assign level = {2{cnt[aw]}} | cnt[aw-1:aw-2];
+
+// N entries status
+always @(posedge clk `SC_FIFO_ASYNC_RESET)
+ if(!rst) cnt <= #1 {aw+1{1'b0}};
+ else
+ if(clr) cnt <= #1 {aw+1{1'b0}};
+ else
+ if( re & !we) cnt <= #1 cnt + { {aw{1'b1}}, 1'b1};
+ else
+ if(!re & we) cnt <= #1 cnt + { {aw{1'b0}}, 1'b1};
+
+////////////////////////////////////////////////////////////////////
+//
+// Registered Full_n & Empty_n Flags
+//
+
+always @(posedge clk `SC_FIFO_ASYNC_RESET)
+ if(!rst) empty_n_r <= #1 1'b1;
+ else
+ if(clr) empty_n_r <= #1 1'b1;
+ else
+ if(we & (cnt >= (n-1) ) & !re) empty_n_r <= #1 1'b0;
+ else
+ if(re & (cnt <= n ) & !we) empty_n_r <= #1 1'b1;
+
+always @(posedge clk `SC_FIFO_ASYNC_RESET)
+ if(!rst) full_n_r <= #1 1'b0;
+ else
+ if(clr) full_n_r <= #1 1'b0;
+ else
+ if(we & (cnt >= (max_size-n) ) & !re) full_n_r <= #1 1'b1;
+ else
+ if(re & (cnt <= (max_size-n+1)) & !we) full_n_r <= #1 1'b0;
+
+////////////////////////////////////////////////////////////////////
+//
+// Sanity Check
+//
+
+// synopsys translate_off
+always @(posedge clk)
+ if(we & full)
+ $display("%m WARNING: Writing while fifo is FULL (%t)",$time);
+
+always @(posedge clk)
+ if(re & empty)
+ $display("%m WARNING: Reading while fifo is EMPTY (%t)",$time);
+// synopsys translate_on
+
+endmodule
+
projects / raggedstone / commitdiff