vhdl work "source/pci/comm_dec.vhd"
vhdl work "source/pci/comm_fsm.vhd"
vhdl work "source/pci/config_04h.vhd"
-vhdl work "source/pci/config_08h.vhd"
vhdl work "source/pci/config_10h.vhd"
vhdl work "source/pci/config_3Ch.vhd"
vhdl work "source/pci/config_mux_0.vhd"
+++ /dev/null
--- J.STELZNER
--- INFORMATIK-3 LABOR
--- 23.08.2006
--- File: CONFIG_08H.VHD
-
-library IEEE;
-use IEEE.std_logic_1164.all;
-
-entity CONFIG_08H is
- port
- (
- REVISION_ID :in std_logic_vector ( 7 downto 0);
- CONF_DATA_08H :out std_logic_vector (31 downto 0)
- );
-end entity CONFIG_08H;
-
-architecture CONFIG_08H_DESIGN of CONFIG_08H is
-
- -- PCI Configuration Space Header Addr : HEX 08 --
-
- constant CONF_CLASS_CODE :std_logic_vector (31 downto 8) := X"078000";--other comm. device
- --constant CONF_REVISION_ID :std_logic_vector ( 7 downto 0) := X"00";
-
-begin
-
- CONF_DATA_08H <= CONF_CLASS_CODE & REVISION_ID;
-
-end architecture CONFIG_08H_DESIGN;
architecture SCHEMATIC of CONFIG_SPACE_HEADER is
constant CONF_DEVICE_ID :std_logic_vector(31 downto 16) := X"AFFE";
+ --other comm. device
+ constant CONF_CLASS_CODE :std_logic_vector (31 downto 8) := X"078000";
SIGNAL gnd : std_logic := '0';
SIGNAL vcc : std_logic := '1';
CONF_DATA_10H : Out std_logic_vector (31 downto 0) );
end component;
- component CONFIG_08H
- Port ( REVISION_ID : In std_logic_vector (7 downto 0);
- CONF_DATA_08H : Out std_logic_vector (31 downto 0) );
- end component;
-
component CONFIG_04H
Port ( AD_REG : In std_logic_vector (31 downto 0);
CBE_REGn : In std_logic_vector (3 downto 0);
begin
CONF_DATA_00H <= CONF_DEVICE_ID & VENDOR_ID;
+ CONF_DATA_08H <= CONF_CLASS_CODE & REVISION_ID;
CONF_DATA_04H <= CONF_DATA_04H_DUMMY;
CONF_DATA_10H <= CONF_DATA_10H_DUMMY;
CONF_WR_10H=>CONF_WR_10H, PCI_CLOCK=>PCI_CLOCK,
PCI_RSTn=>PCI_RSTn,
CONF_DATA_10H(31 downto 0)=>CONF_DATA_10H_DUMMY(31 downto 0) );
- I4 : CONFIG_08H
- Port Map ( REVISION_ID(7 downto 0)=>REVISION_ID(7 downto 0),
- CONF_DATA_08H(31 downto 0)=>CONF_DATA_08H(31 downto 0) );
I2 : CONFIG_04H
Port Map ( AD_REG(31 downto 0)=>AD_REG(31 downto 0),
CBE_REGn(3 downto 0)=>CBE_REGn(3 downto 0),