cleanup request generation, add sensor list function

[rsbs2] / rsbs2.pl

#!/usr/bin/perl -w

use LWP::UserAgent;
use XML::Simple;
use Data::Dumper;
use MIME::Base64;
use Digest::MD5 qw(md5);

my $ua = LWP::UserAgent->new;
my $sid;
my $host;
my $poweronms=200;
my $poweroffms=5000;
my $verbose = 0;

my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
	IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
	ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
	ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
	ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
	ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
	AMR_DISABLE_PCI AMR_ENABLE_ISCSI_TIMEOUT AMR_ENABLED AMR_HOST_INTERFACE
	AMR_SERVER_LIST AMR_USB_FDD_CBI_UFI_TRANSPORT AMR_USB_R2T_TIMEOUT_MSEC
	AVR_4BIT_ACTION AVR_4BIT_SAMPLE_TIME AVR_ARCHITECTURE AVR_CHIP_TYPE
	AVR_CLIENT_LANGUAGE AVR_DISABLE_SVR_MOUSE_ON_SESSION_START
	AVR_KB_VERSION AVR_MAX_SESSION_COUNT AVR_MOUSE_ACCELERATION
	AVR_MOUSE_MAX_STEP_SIZE AVR_NUMB_MOUSE_PACKETS
	AVR_PCI_PATTERN_HANDS_OFF_ENABLED AVR_PREF_KB_STICKY_KEY_MODE_ON
	AVR_PREF_KB_TYPING_MODE_ON AVR_PREF_KB_WARN_UNID_EV
	AVR_REGISTERS_BASE_ADDR AVR_RESET_PAUSE AVR_SCREEN_REFRESH
	AVR_SUPPORTED_CHIP AVR_TILE_TIMEOUT AVR_VIDEO_MEM_BASE_ADDR BAUDRATE
	BAUDRATE_MODEM BAUDRATE_PPP BMC_SUPPORTS_GRACEFULL
	BMC_TIMESYNC_INTERVAL CARD_NAME CONSOLE_IPMI_MOUSE_BYTE_TIME
	CONSOLE_KEYBOARD_ACCESS_MODE CONSOLE_MOUSE_ACCESS_MODE
	CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
	CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
	DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
	DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
	ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
	ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
	ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
	ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
	ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
	ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
	EXPROM_ENTRY EXPROM_EXIT_DELAY_SEC EXPROM_F3_DELAY_SEC
	EXPROM_INT13_COMPATIBILITY EXPROM_SETUP_BANNER FIRMWARE_REVISION
	FP_ACDC FP_AMR FP_AVR_ASR FP_AVR_GRAPHIC_CONSOLE FP_AVR_TEXT_CONSOLE
	FP_AVRMANCONF_4BIT_SAMPLE FP_AVRMANCONF_ACCESS_MODES FP_AVRMANCONF_CHIP
	FP_AVRMANCONF_MOUSE_ACCELERATION FP_AVRMANCONF_MOUSE_TYPE
	FP_AVRMANCONF_RESET_PAUSE FP_AVRMANCONF_SCREEN_REFRESH FP_BATTERY
	FP_BOARDRESET_BUTTON FP_COMREDIRECT FP_F3_PPP FP_I2C FP_ICMB FP_INSTR
	FP_INTERNAL_LAN FP_KEY_CONSOLE FP_LAN_SPEED
	FP_LAST_BOARD_POWER_WARNING_ENABLED FP_NO_BLADE_PANEL
	FP_NO_CARDCONF_PANEL FP_NO_DIAG_PANEL FP_NO_DSAUTHCONF_PANEL
	FP_NO_MANAGE_PANEL FP_NO_MEMORY_PANEL FP_NO_SENSOR_PANEL
	FP_NO_SERVERCONF_PANEL FP_NO_SSL_PANEL FP_NO_SYSLOG_PANEL
	FP_NO_USERCONF_PANEL FP_PAGING_EMAIL FP_PAGING_SERIAL FP_PAGING_SNMP
	FP_PCI_CONFIG FP_PPP FP_PROP_BAUDRATE_REQBOOT FP_PROP_PPP_INIT_REQBOOT
	FP_PROP_PS_REQBOOT FP_PROP_TERM_DIRECT_CONNECT_REQBOOT FP_REMOTE_BOOT
	FP_REMOTE_DISK FP_REMOTE_POWER FP_SAC_CONSOLE FP_SEL FP_SENSOR_HISTORY
	FP_SEQ_SEL FP_SERVER_POWER FP_SERVER_REBOOT FP_SERVER_RESET
	FP_SERVER_SHUTDOWN FP_SMM FP_SSL FP_STATUS_DIAG_PANEL
	FP_STATUS_MEMORY_PANEL FP_STATUS_PCI_CONFIG FP_STATUS_SAC_CONSOLE
	FP_SYSTEM_LAN FP_TEXT_ASR FP_TEXT_CONSOLE FP_TUI FP_VERSION FP_VGA_ASR
	FP_VGA_CONSOLE FP_VT100_CONSOLE GATEWAY GATEWAY_MAC
	GRATUITOUS_ARP_INTERVAL HELP_LOCATION HIST0_SAMPLE_TIME HIST0_SENSOR_ID
	HIST1_SAMPLE_TIME HIST1_SENSOR_ID HIST2_SAMPLE_TIME HIST2_SENSOR_ID
	HIST3_SAMPLE_TIME HIST3_SENSOR_ID HTTP_PORT_NUM HTTP_SSL_PORT_NUM
	I2C_ADDR_8BIT_CHASSIS_BMC I2C_ADDR_8BIT_MY_BMC I2C_ADDR_8BIT_THIS_CARD
	INFOTXT_BPROP_ACCESS INFOTXT_DB_ACCESS IP_ADDRESS IP_ADDRESS_SOURCE
	IPMB_RETRY_TIMEOUT IPMB_SEQ_NUM_TIMEOUT IPMB_TX_RETRIES
	IPMI_COUNTRY_SELECT IPV4_HEADER_PARAMETERS ISCSI_DEVICE_VENDOR
	ISCSI_PRODUCT_EMUL_BD ISCSI_PRODUCT_EMUL_CD ISCSI_PRODUCT_EMUL_FD
	LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY LAST_IP_ADDRESS
	LAST_NETMASK LOCATION MAC_ADDRESS MODEM_CONNECT MODEM_CONNECT2
	MODEM_SEPARATOR NETMASK PAGE_RETRIES PAGE_RETRY_DELAY_SEC POST_ERRCODE
	POST_PROP PPP_AVAILABLE PPP_INIT PPP_IP_ADDR PPP_NETMASK PPP_PORT
	PPP_STATUS PPP_STAY_ALIVE_SECS PPP_WELCOME PPP2_BAUDRATE PPP2_INIT
	PPP2_IP_ADDR PPP2_NETMASK PPP2_PORT PPP2_STAY_ALIVE_SECS PRODUCT
	PRODUCT_ABBR PS_ASR PS_DISK PS_FAN PS_HARDWARE PS_MEMORY PS_NETWORK
	PS_OTHER PS_POST PS_RMC PS_SECURITY PS_SYS_POWER PS_SYS_STATUS
	PS_TEMPERATURE PS2_ADAPTER_POWER_UP_MODE PS2_FW_UPDATE_CMD
	PS2_FW_UPDATE_IMG_NAME PS2_FW_UPDATE_STATUS RMC_DS_GROUP SAC_PORT
	SERVER_CODEPAGE SERVER_HARD_RESET_PULSE_MS SERVER_HARD_RESET_VIA_IPMI
	SERVER_ID SERVER_IP SERVER_KEYBOARD SERVER_KEYBOARD_LANGUAGES_LIST
	SERVER_MEMORY SERVER_NAME SERVER_POWER_CHANGE_VIA_IPMI
	SERVER_POWER_OFF_MODE SERVER_POWER_OFF_PULSE_MS SERVER_POWER_ON_MODE
	SERVER_POWER_ON_PULSE_MS SERVER_TIMEZONE SERVER_URL
	SESSION_MANAGER_SESSION_TIMEOUT SI_DEF_POLL_INTERVAL_MS
	SI_DEF_POLL_OFFSET_MS SMTP_RESP_TIME_SEC SMTP_RETRIES
	SMTP_RETRY_DELAY_SEC SMTP_REVERSE_PATH SMTP_SERVER SNMP_AGENT_ENABLED
	SNMP_COMMUNITY SNMP_ENTERPRISE_ID SNMP_SERVER SNMP_SERVER_1
	SNMP_SERVER_2 SNMP_SERVER_3 SNMP_SERVER_4 SNMP_SERVER_5 SNMP_SERVER_6
	SNMP_SERVER_7 SNMP_SERVER_MAC SNMP_SYSOID SNMP_TRAP_MASK
	SNMP_TRAP_VERSION SSL_40_OR_128_ENCRYPTION SSL_CAPABLE_FIRMWARE
	SSL_ENABLE_ALOG SSL_ENABLE_ALOG_FALLBACK SSL_ENABLE_CLIENT_CERT
	SSL_ENABLE_HTTP SSL_ENABLE_HTTPS SSL_ENABLE_NOTIFY
	SSL_NOTIFICATION_TIME TELNET_ENABLE TELNET_PORT_NUM
	TERMINAL_DIRECT_CONNECT TERMINAL_ENCODING TEXT_CONSOLE_TIMEOUT
	TFTP_ADDR_FIRMWARE TFTP_ADDR_REBOOT TFTP_FIRMWARE_FILE TFTP_REBOOT_FILE
	TXT_REMOTE_CONSOLE_COLOR_MAP TXT_REMOTE_CONSOLE_FREQ
	USB_DEVICE_SETTINGS USE_SERVER_IP_ADDRESS USER_TIMEOUT VENDOR
	RMC_AUTODETECT RMC_FUNCTIONS RMC_MODULES AGENT_VERSION BIOS_VER
	BOARD_MFT BOARD_MODEL BOARD_PART_NUM BOARD_SERIAL BOARD_VER CAB_MFT
	CAB_MODEL CAB_PROD_NUM CAB_PROD_VER CAB_SERIAL CHA_MODEL
	CSV_ConfAlarmMailFrom CSV_ConfAlarmMailMessage CSV_ConfAlarmMailSubject
	CSV_ConfAlarmMailType CSV_ConfAlarmMailUserInfo0
	CSV_ConfAlarmMailUserInfo1 PER_USER_PAGING RMC_SEL_FILTER
	SERVER_AD_NAME SERVER_AD_NAME2 SERVER_AD_NAME3 SERVER_AD_NAME4
	SERVER_CONTACT SERVER_DESCRIPTION SERVER_IP_ADDRESS SERVER_IP_ADDRESS2
	SERVER_IP_ADDRESS3 SERVER_IP_ADDRESS4 SERVER_IP_DHCP SERVER_IP_DHCP2
	SERVER_IP_DHCP3 SERVER_IP_DHCP4 SERVER_IP_GATEWAY SERVER_IP_GATEWAY2
	SERVER_IP_GATEWAY3 SERVER_IP_GATEWAY4 SERVER_IP_NETMASK
	SERVER_IP_NETMASK2 SERVER_IP_NETMASK3 SERVER_IP_NETMASK4
	SERVER_LOCATION SERVER_MAC_ADDRESS SERVER_MAC_ADDRESS2
	SERVER_MAC_ADDRESS3 SERVER_MAC_ADDRESS4 SERVER_MAX_LAN_ADAPTER
	SERVER_OS SERVER_OS_VENDOR);

sub _crc16 {
	my $str = shift;
	my $crc = 0;
	for my $k (0..length($str)-1) {
		$crc ^= ord(substr($str, $k, 1)) << 8;
		for (0..7) {
			$crc = (($crc & 0x8000) == 32768 ? ($crc<<1) ^ 0x1021 : $crc<<1);
		}
	}
	$crc = $crc & 0xFFFF;
	return $crc;
}

sub _hash {
	my ($password, $challenge) = @_;
	my @challenge_bytes = unpack 'c16', decode_base64($challenge);
	my @pwd_hash            = unpack 'c16', md5($password);
	my @xor_bytes;
	for my $i (0..15) {
		$xor_bytes[$i] = $challenge_bytes[$i] ^ $pwd_hash[$i];
	};
	my $hash = md5(pack 'c16', @xor_bytes);
	my $crc = _crc16($hash);
	$hash .= chr($crc & 0xff) . chr($crc >> 8 & 0xff);
	return encode_base64($hash, "");
}

sub _req {
	my $xml = shift;
	$request = HTTP::Request->new(POST => "http://${host}/cgi/bin");
	$request->header(Cookie => "sid=$sid");
	$request->content_type('application/x-www-form-urlencoded');
	$request->content('<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ>'.$xml.'</RMCSEQ>');
	$response = $ua->request($request);
	die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
	XMLin($response->content, SuppressEmpty => '');
}

sub _cmd {
	my $cmd = shift;

	my $reqstr='<REQ CMD="'.$cmd.'"></REQ>';
	my $res = _req($reqstr);
	if ($res->{RESP}->{RC} ne '0x0') {
		print "${cmd} failed: ".$res->{RESP}->{RC}."\n";
		undef;
	}

	$res->{RESP};
}

sub _getprop {
	my $property = shift;

	my $reqstr='<REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ>';
	my $resp = _req($reqstr);

	print "get: ${property}\n" if ($verbose);
	
	if ($resp->{RESP}->{RC} ne '0x0') {
		$resp->{RESP}->{RC};
	} else {
		$resp;
	}
}

sub logout {
	print "Logout\n" if ($verbose);
	my $request = HTTP::Request->new(GET => "http://${host}/cgi/logout");
	$request->header(Cookie => "sid=$sid");
	my $response = $ua->request($request);
	die("While trying to logout: " . $response->status_line . "\n") unless ($response->is_success);

	my $xmlin = XMLin($response->decoded_content);
	die "Error logging out: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
}

sub setprop {
	my $property = shift;
	my $value = shift;

	my $oldval = _getprop($property)->{RESP}->{PROPLIST}->{PROP}->{VAL};

	if ($value eq $oldval) {
		print "${property} is already ${value}\n" if ($verbose);
		return;
	}
	
	my $reqstr='<REQ CMD="propset"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></REQ>';
	my $res = _req($reqstr);

	if ($res->{RESP}->{RC} ne '0x0') {
		print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
		undef;
	} else {
		print "${property}: ${oldval} -> ${value}\n" if ($verbose);
		$oldval;
	}
}

sub serveraction {
	my $action = shift;

	my $pmode = 2;

	setprop("SERVER_HARD_RESET_VIA_IPMI", "FALSE");
	setprop("SERVER_POWER_CHANGE_VIA_IPMI", "FALSE");
	#PM Mode
	setprop("SERVER_POWER_ON_MODE", sprintf("0x%x", $pmode));
	setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode));

	print "${action}...\n" if ($verbose);
	my $reqstr='<REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ>';
	my $res = _req($reqstr);

	if ($res->{RESP}->{RC} ne '0x0') {
		print "FAILED:".$res->{RESP}->{RC}."\n";
	}
}

sub powerup {
	print "powerup\n" if ($verbose);
	setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
	setprop("SERVER_POWER_OFF_PULSE_MS", "0x0");
	serveraction("powercycle");
}

sub powerdown {
	print "powerdown\n" if ($verbose);
	setprop("SERVER_POWER_ON_PULSE_MS", "0x0");
	setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
	serveraction("powercycle");
}

sub powercycle {
	print "powercycle\n" if ($verbose);
	setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
	setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
	serveraction("powercycle");
}

sub showprop {
	my $property = shift;

	my $phash = _getprop($property)->{RESP}->{PROPLIST}->{PROP};

	print "${property}: " . ${phash}->{VAL} . " (" . ${phash}->{PERMS} . ")\n";
}

sub board_properties {
	my $reqstr='<REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ>';
	my $resp = _req($reqstr);

	print " * Board Properties:\n";
	foreach my $bprop (@{$resp->{RESP}->{BPROPLIST}->{BPROP}}) {
		print " * " . ${bprop}->{NAME} . ": " . ${bprop}->{VAL} . "\n";
	}
}

sub show_boarddesc {
	my $reqstr='<REQ CMD="boardpropget"><BPROPLIST><BPROP NAME="BOARD_DESCRIPTION"/></BPROPLIST></REQ>';
	my $boarddesc64 = _req($reqstr)->{RESP}->{BPROPLIST}->{BPROP}->{VAL};
	my $boarddesc = decode_base64($boarddesc64);
	my @board = split(//, $boarddesc);
	foreach my $byte (@board) {
		printf ("0x%02x ", ord($byte));
}
print "\n";
}

sub show_all_vars {
	foreach my $fwvar (@fw_vars) {
		showprop($fwvar);
	}
}

sub usrlist {
	my $res = _cmd("usrlist");
	my @users = ();

	if ($res->{RC} ne '0x0') {
		print "FAILED:".$res->{RC}."\n";
		();
	} else {
		if (ref($res->{USRLIST}->{USER}) eq 'ARRAY') {
			foreach my $usr (@{$res->{USRLIST}->{USER}}) {
				push @users, $usr->{NAME};
			}
		} else {
			push @users, $res->{USRLIST}->{USER}->{NAME};
		}
	}
	@users;
}

sub getusrprops {
	my $usr = shift;

	my $reqstr = '<REQ CMD="usrpropget"><USER NAME="'.$usr.'"></USER></REQ>';
	my $res = _req($reqstr)->{RESP}->{USER}->{PROP};

	$res;
}

sub usradd {
	my $usr = shift;

	my $reqstr='<REQ CMD="usradd"><USER NAME="'.$usr.'"/></REQ>';
	my $res = _req($reqstr);
	if ($res->{RESP}->{RC} ne '0x0') {
		print "FAILED:".$res->{RESP}->{RC}."\n";
	}
}

sub setusrprop {
	my $usr = shift;
	my $property = shift;
	my $value = shift;

	my $reqstr='<REQ CMD="usrpropget"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"></PROP></USER></REQ>';
	my $res = _req($reqstr);

	my $oldval = ${res}->{RESP}->{USER}->{PROP}->{VAL};

	if ($value eq $oldval) {
		print "${property} is already ${value}\n" if ($verbose);
		return;
	}
	
	$reqstr='<REQ CMD="usrpropset"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></USER></REQ>';
	$res = _req($reqstr);

	if ($res->{RESP}->{RC} ne '0x0') {
		print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
		undef;
	} else {
		print "${property}: ${oldval} -> ${value}\n" if ($verbose);
		$oldval;
	}
}

sub syslog_debug {
	my $destination_ip = shift;
	my $bcast = shift;

	my $reqstr='<REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ>';
	my $res = _req($reqstr);
	if ($res->{RESP}->{RC} ne '0x0') {
		print "FAILED:".$res->{RESP}->{RC}."\n";
		return;
	}

	$reqstr='<REQ CMD="dbgmsgcfg"><ON>TRUE</ON><CHANNELMASK>0x1</CHANNELMASK><MMASK>0x1</MMASK><STORE>FALSE</STORE></REQ>';
	$res = _req($reqstr);
	if ($res->{RESP}->{RC} ne '0x0') {
		print "FAILED:".$res->{RESP}->{RC}."\n";
		return;
	}

	print "Debug messages will be sent to ${destination_ip} (broadcast: ${bcast})\n";
}

sub sensors {
	my $slist= _cmd("sensorlist");
	my %sens = ();

	if ($slist->{RC} ne '0x0') {
		print "Error getting sensorlist: ".$slist->{RC}."\n";
		return;
	}

	foreach my $s (@{$slist->{SENSORLIST}->{SENSOR}}) {
	}
}

sub status {
	my $boardstatus = _cmd("boardstatus")->{STATUS};
	my $fw = _cmd("boardfwstatus");
	my $boardfwstatus = $fw->{STATUS};
	my $boardfwprogress = $fw->{PROGRESS};
	$bs = hex($boardstatus);

	print "Server Power:\t\t" . (($bs & 0x01) ? "ON" : "OFF") . "\n";
	print "External PSU:\t\t" . (($bs & 0x02) ? "ON" : "OFF") . "\n";
	print "Battery:\t\t";
	if ($bs & 0x04) {
		if ($bs & 0x08) {
			print "LOW\n";
		} elsif ($bs & 0x800) {
			print "ON\n";
		} else {
			print "UNKNOWN\n";
		}
	} else {
		print "OFF\n";
	}
	print "Standby Power:\t\t" . (($bs & 0x08) ? "ON" : "OFF") . "\n";
	print "LAN:\t\t\t" . (($bs & 0x10) ? "CONNECTED" : "NC") . "\n";
	print "I2C:\t\t\t" . (($bs & 0x20) ? "CONNECTED" : "NC") . "\n";
	print "SMM:\t\t\t" . (($bs & 0x40) ? "CONNECTED" : "NC") . "\n";
	print "Instrumentation:\t" . (($bs & 0x200) ? "CONNECTED" : "NC") . "\n";
	print "ICMB:\t\t\t" . (($bs & 0x400) ? "CONNECTED" : "NC") . "\n";
	print "PPP:\t\t\t" . (($bs & 0x10000) ? "ON" : "OFF") . "\n";
	print "Paging:\t\t\t" . (($bs & 0x20000) ? "ON" : "OFF") . "\n";
	print "COM redirection:\t" . (($bs & 0x100000) ? "ON" : "OFF") . "\n";
	print "UART redirect:\t\t" . (($bs & 0x200000) ? "ON" : "OFF") . "\n";
	print "UART redirect pending:\t" . (($bs & 0x400000) ? "TRUE" : "FALSE") . "\n";
	print "Hex BoardStatus:\t${boardstatus}\n";
	my $fws = hex ($boardfwstatus);
	print "FW status:\t\t";
	if ($fws == 3 || $fws == 32771) {
		print "WAITING";
	} else {
		print "DONE";
	}
	print " (${boardfwstatus})\n";
	if (($fws & 0x8080) || ($fws & 0x80)) {
		printf("FW error:\t\t0x%02x\n", ($fws & 0xff));
	}
	if ($fws != 0) {
		print "FW upgrade progress:\t${boardfwprogress}\n";
	}
	print "\nSensors:\n";
	sensors();
}

sub login {
	my $user = shift;
	my $pass = shift;

	my $response = $ua->get("http://${host}/cgi/challenge");
	die $response->status_line if (!($response->is_success));

	my $xmlin = XMLin($response->decoded_content);
	die "Error getting Challenge: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
	my $challenge = $xmlin->{CHALLENGE};
	print "Challenge: ${challenge}\n" if ($verbose);

	$sid = $response->headers->header('Set-Cookie');
	die "No SessionID!" if (!defined($sid));
	chomp($sid);
	$sid =~ s/.*sid=(.*);.*/$1/;
	print "SID: ${sid}\n" if ($verbose);

	my $login_hash = _hash($pass, $challenge);
	print "Hash: ${login_hash}\n" if ($verbose);

	my $request = HTTP::Request->new(GET => "http://${host}/cgi/login?user=${user}&hash=${login_hash}");
	$request->header(Cookie => "sid=$sid");
	$response = $ua->request($request);
	die("While trying to login: " . $response->status_line . "\n") unless ($response->is_success);

	$xmlin = XMLin($response->decoded_content);
	die "Error logging in: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');

	$sid;
}

sub read_inifile {
	my $filename = shift;

	open(INIFILE,"<${filename}") || die("can't open config: ${filename}: $!");
	my %Ini = ();
	my @sections = ();
	while(<INIFILE>) {
		chomp;
	
		next if (m/^#/);
	
		if (m/^\s*\[(.*)\]\s*$/) {
			push @sections, $1;
			next;
		}
	
		if (@sections) {
			if (m/^\s*([^=]+)\s*=\s*(.*)\s*$/) {
				${$Ini{$sections[$#sections]}}{$1} = $2;
			}
		}
	}
	close(INIFILE);

	%Ini;
}

my %Config = read_inifile("$ENV{HOME}/.rsbs2rc");

my $valid_arg = 0;
my $powup = 0;
my $powdown = 0;
my $powcyc = 0;
my $reset = 0;
my $resetrsbs2 = 0;
my @sprop = ();
my @gprop = ();
my @xmlsend = ();
my $show = 0;
my $enable_debug = "";
my $save = "";
my $load = "";
my $showstat = 0;
my $hostalias;

while (defined($ARGV[0])) {
	SWITCH: for ($ARGV[0]) {
		/^-v$/	&& do {
				$verbose = 1;
				shift @ARGV;
				last SWITCH;
			};
		/^-g$/ && do {
				shift @ARGV;
				push @gprop, shift @ARGV;
				last SWITCH;
			};
		/^-s$/ && do {
				shift @ARGV;
				push @sprop, shift @ARGV;
				last SWITCH;
			};
		/^-u$/ && do {
				$powup = 1;
				shift @ARGV;
				last SWITCH;
			};
		/^-d$/ && do {
				$powdown = 1;
				shift @ARGV;
				last SWITCH;
			};
		/^-c$/ && do {
				$powcyc = 1;
				shift @ARGV;
				last SWITCH;
			};
		/^-r$/ && do {
				$reset = 1;
				shift @ARGV;
				last SWITCH;
			};
		/^-R$/ && do {
				$resetrsbs2 = 1;
				shift @ARGV;
				last SWITCH;
			};
		/^-l$/ && do {
				shift @ARGV;
				$enable_debug = shift @ARGV;
				last SWITCH;
			};
		/^-x$/ && do {
				$show = 1;
				shift @ARGV;
				last SWITCH;
			};
		/^-X$/ && do {
				shift @ARGV;
				push @xmlsend, shift @ARGV;
				last SWITCH;
			};
		/^-b$/ && do {
				$showstat = 1;
				shift @ARGV;
				last SWITCH;
			};
		/^-save$/ && do {
				shift @ARGV;
				$save = shift @ARGV;
				last SWITCH;
			};
		/^-load$/ && do {
				shift @ARGV;
				$load = shift @ARGV;
				last SWITCH;
			};

		if (defined($ARGV[0])) {
			$hostalias = $ARGV[0];
			shift(@ARGV);
			$valid_arg = 1;
		}

		while ( defined($ARGV[0]) ) { $valid_arg = 0; shift(@ARGV); }
	}
}

if ($valid_arg && (!defined($Config{$hostalias}))) {
	$valid_arg = 0;
}

if (!$valid_arg) {
	print STDERR "Usage: $0 options card-alias\n";
	print STDERR "Options:\n";
	print STDERR "\t-g property\tget property value\n";
	print STDERR "\t-s property=val\tset property value\n";
	print STDERR "\t-u\t\tpowerup\n";
	print STDERR "\t-d\t\tpowerdown\n";
	print STDERR "\t-c\t\tpowercycle\n";
	print STDERR "\t-r\t\treset\n";
	print STDERR "\t-R\t\treset RSB S2 borad\n";
	print STDERR "\t-x\t\tshow all properties, variables and settings\n";
	print STDERR "\t-l IP\t\tsend SYSLOG debug messages to IP\n";
	print STDERR "\t-b\t\tshow board/server status\n";
	print STDERR "\t-X\t\tsend raw XML string (start with REQ tag)\n";
	print STDERR "\t-v\t\tverbose\n";
	print STDERR "\t-save file\tsave configuration to 'file'\n";
	print STDERR "\t-load file\tload configuration from 'file'\n";
	print STDERR "\n";
	print STDERR "card-alias\tone of: ";
	foreach my $alias (keys(%Config)) {
		print STDERR "\"${alias}\" ";
	}
	print STDERR "(see ~/.rsbs2rc)\n";
	exit(1);
}

$host = ${$Config{$hostalias}}{"host"};
$poweronms = ${$Config{$hostalias}}{"poweronms"} if (defined(${$Config{$hostalias}}{"poweronms"}));
$poweroffms = ${$Config{$hostalias}}{"poweroffms"} if (defined(${$Config{$hostalias}}{"poweroffms"}));

$sid = login(${$Config{$hostalias}}{"user"}, ${$Config{$hostalias}}{"pass"});

if ($show) {
	show_boarddesc();
	board_properties();
	show_all_vars();
}

if (@gprop) {
	foreach my $p (@gprop) {
		showprop($p);
	}
}

if (@sprop) {
	foreach my $p (@sprop) {
		(my $pr, $v) = split(/=/,$p,2);
		my $oldval = setprop($pr, $v);
		if (defined($oldval)) {
			print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
		}
	}
}

if (@xmlsend) {
	foreach my $x (@xmlsend) {
		print Dumper(_req($x));
	}
}

if ($save ne '') {
	my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
	GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
	ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
	LAST_IP_ADDRESS LAST_NETMASK);

	open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
	print SAVEFILE "[global]\n";
	print STDERR "saving" if (!$verbose);
	foreach my $ts (@fw_vars) {
		next if (grep(/^${ts}$/, @dontsave));

		my $phash = _getprop($ts)->{RESP}->{PROPLIST}->{PROP};
		next if ($phash->{PERMS} ne 'RW');
		
		print SAVEFILE "${ts}=".$phash->{VAL}."\n";
		print STDERR "." if (!$verbose);
	}
	foreach my $usr (usrlist()) {
		print SAVEFILE "\n[${usr}]\n";
		foreach my $up (@{getusrprops($usr)}) {
			next if ($up->{PERMS} ne 'RW');

			print SAVEFILE $up->{NAME}."=".$up->{VAL}."\n";
		}
		print STDERR "." if (!$verbose);
	}
	close(SAVEFILE);
	print STDERR "done\n" if (!$verbose);
}

if ($load ne '') {
	my %loadfile = read_inifile("${load}");
	print STDERR "loading" if (!$verbose);

	foreach my $p (keys(%{$loadfile{'global'}})) {
		setprop($p, $loadfile{'global'}->{$p});
		print STDERR "." if (!$verbose);
	}

	my @users = usrlist();
	foreach my $usr (keys(%loadfile)) {
		next if ($usr eq 'global');
		if (!grep(/^${usr}$/, @users)) {
			print STDERR "\nAdding user \"${usr}\".\n" if ($verbose);
			usradd($usr);
		}
		foreach my $p (keys(%{$loadfile{$usr}})) {
			setusrprop($usr, $p, $loadfile{$usr}->{$p});
			print STDERR "." if (!$verbose);
		}
	}
	print STDERR "done\n" if (!$verbose);
	print "Settings loaded, resetting board...\n";
	_cmd("boardreset");
	exit(0);
}

if ($enable_debug ne '') {
	syslog_debug($enable_debug, "TRUE");
}

if ($reset) {
	print "hardreset\n" if ($verbose);
	serveraction("hardreset");
}

if ($powup) {
	powerup();
}

if ($powdown) {
	powerdown();
}

if ($powcyc) {
	powercycle();
}

if ($showstat) {
	status();
}

if ($resetrsbs2) {
	print "Resetting board...\n";
	_cmd("boardreset");
	exit(0);
}

logout();