cvs.zerfleddert.de Git - rsbs2/blob - README.txt

   1 Firmware for RSB S2:
   2  * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
   3  * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=4EC6401E-CA1A-47D8-A178-C75D91665CE2
   4 Use the first link for a patchable firmware, the second is just an "update"
   5 firmware which will not touch user settings and rights...
   6
   7 Documentation:
   8  * http://manuals.fujitsu-siemens.com/open.php?ID=4384
   9  * http://cp.literature.agilent.com/litweb/pdf/5988-8687EN.pdf
  10  * http://cp.literature.agilent.com/litweb/pdf/5988-8686EN.pdf
  11
  12 Software:
  13  * http://download.ts.fujitsu.com/prim_supportcd/start.html
  14  * http://download.ts.fujitsu.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi
  15    (DOS utilities (spman.exe))
  16
  17 How to flash:
  18  * Download the firmware from:
  19    http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0
  20  * Extract the .exe file with unzip
  21  * Place RSB_S2.bin, RSB_S2.001 and RSB_S2_SINGLE.bin in the tftpboot
  22    directory. Make sure that all three files are readable!
  23  * Initiate the firmware-upgrade from the web interface:
  24    - When upgrading from 6.x, flash the RSB_S2.bin file, which
  25      will automatically load the RSB_S2.001 file in the process
  26    - When upgrading from 7.x, flash the RSB_S2_SINGLE.bin
  27    WARNING: NEVER FLASH THE .001 FILES DIRECTLY, THIS WILL BRICK YOUR BOARD!
  28  * Modify RSB_S2_SINGLE.bin with 'firmware' and reflash ;-)
  29    (Don't try to modify the other files)
  30
  31 Linux notes:
  32  * Disable ipmi_si:
  33    echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2
  34    If you don't do this, the bootup process will take a long time but finally
  35    succeed.
  36  * Install required perl packages:
  37    apt-get install libwww-perl libxml-simple-perl libcrypt-ssleay-perl
  38
  39 Pinout:
  40   +---------------+---------------+--------------------------------------+---+-
  41   |               | 2 4 6 8 A C E |                                      | 1 |
  42   |               | 1 3 5 7 9 B D |                                      | 2 |
  43   |      +-----+  +------   ------+               +---------+ +-----+    +---+
  44   |      | 1 2 |             CONN2                |  IPMB4  | |IPMB3|     J1
  45   |      | 3 4 |                                  +---------+ +-----+
  46   +        5 6 |                                  +---------+
  47  USB     | 7 8 |                                  | 1   2 3 |
  48          | 9 A |                                  +---------+
  49   +      +-----+                                       CONN3
  50   |       CONN1
  51   |
  52   .
  53   .
  54   .
  55   +                             +---+
  56  PWR                            | 1 |
  57                                 | 2 |J2
  58   +                             +---+
  59   |   +-------------+            +-+
  60   |   |             |            | |
  61   +---+             +------------+ +-------
  62
  63 CONN1:          CONN2:              CONN3:          J1: Repair mode enable
  64  1)              1) ATX-PWR +*       1)             J2: Standby power enable
  65  2)              2) ATX-PWR GND*     2)
  66  3) USB D-       3) ATX-PWR +*       3)
  67  4)              4) ATX-PWR GND*
  68  5) USB D+       5) ATX-RESET +*
  69  6)              6) ATX-RESET GND*
  70  7) USB GND      7) ATX-RESET +*
  71  8)              8) ATX-RESET GND*
  72  9)              9) PWR-SW
  73  A)              A) PWR-SW
  74                  B) RESET-SW
  75                  C) RESET-SW
  76                  D)
  77                  E)
  78
  79 *) use to connect to the front panel button and pinheader on the mainboard,
  80    beware of the polarity!