]> cvs.zerfleddert.de Git - proxmark3-svn/commitdiff
fix LED signalling in hf 15 snoop and hf 14a snoop (#797)
authorpwpiwi <pwpiwi@users.noreply.github.com>
Tue, 12 Mar 2019 06:49:23 +0000 (07:49 +0100)
committerGitHub <noreply@github.com>
Tue, 12 Mar 2019 06:49:23 +0000 (07:49 +0100)
* LED_A (yellow): PM3 is active (snooping)
* LED_B (green): reader is sending a command
* LED_C (red): tag is sending a reply

armsrc/iso14443a.c
armsrc/iso15693.c

index 0247820ec81ea6dfb9ef0cc2d3d6cc573a9b98cf..d3d0138b97c6f699552e3ed99a21f02041402863 100644 (file)
@@ -319,15 +319,18 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
                        Uart.startTime -= Uart.syncBit;
                        Uart.endTime = Uart.startTime;
                        Uart.state = STATE_START_OF_COMMUNICATION;
+                       LED_B_ON();
                }
 
        } else {
 
                if (IsMillerModulationNibble1(Uart.fourBits >> Uart.syncBit)) {                 
                        if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) {         // Modulation in both halves - error
+                               LED_B_OFF();
                                UartReset();
                        } else {                                                                                                                        // Modulation in first half = Sequence Z = logic "0"
                                if (Uart.state == STATE_MILLER_X) {                                                             // error - must not follow after X
+                                       LED_B_OFF();
                                        UartReset();
                                } else {
                                        Uart.bitCount++;
@@ -366,6 +369,7 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
                                }
                        } else {                                                                                                                        // no modulation in both halves - Sequence Y
                                if (Uart.state == STATE_MILLER_Z || Uart.state == STATE_MILLER_Y) {     // Y after logic "0" - End of Communication
+                                       LED_B_OFF();
                                        Uart.state = STATE_UNSYNCD;
                                        Uart.bitCount--;                                                                                        // last "0" was part of EOC sequence
                                        Uart.shiftReg <<= 1;                                                                            // drop it
@@ -387,6 +391,7 @@ static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
                                        }
                                }
                                if (Uart.state == STATE_START_OF_COMMUNICATION) {                               // error - must not follow directly after SOC
+                                       LED_B_OFF();
                                        UartReset();
                                } else {                                                                                                                // a logic "0"
                                        Uart.bitCount++;
@@ -492,6 +497,7 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non
                                Demod.startTime -= Demod.syncBit;
                                Demod.bitCount = offset;                        // number of decoded data bits
                                Demod.state = DEMOD_MANCHESTER_DATA;
+                               LED_C_ON();
                        }
                }
 
@@ -534,6 +540,7 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non
                                }
                                Demod.endTime = Demod.startTime + 8*(9*Demod.len + Demod.bitCount + 1);
                        } else {                                                                                                        // no modulation in both halves - End of communication
+                               LED_C_OFF();
                                if(Demod.bitCount > 0) {                                                                // there are some remaining data bits
                                        Demod.shiftReg >>= (9 - Demod.bitCount);                        // right align the decoded bits
                                        Demod.output[Demod.len++] = Demod.shiftReg & 0xff;      // and add them to the output
@@ -574,6 +581,7 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
        // bit 1 - trigger from first reader 7-bit request
        
        LEDsoff();
+       LED_A_ON();
 
        iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
 
@@ -626,7 +634,6 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
                        break;
                }
 
-               LED_A_ON();
                WDT_HIT();
 
                int register readBufDataP = data - dmaBuf;
@@ -658,18 +665,15 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
                        AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE;
                }
 
-               LED_A_OFF();
-               
                if (rsamples & 0x01) {                          // Need two samples to feed Miller and Manchester-Decoder
 
                        if(!TagIsActive) {              // no need to try decoding reader data if the tag is sending
                                uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4);
                                if (MillerDecoding(readerdata, (rsamples-1)*4)) {
-                                       LED_C_ON();
-
                                        // check - if there is a short 7bit request from reader
-                                       if ((!triggered) && (param & 0x02) && (Uart.len == 1) && (Uart.bitCount == 7)) triggered = true;
-
+                                       if ((!triggered) && (param & 0x02) && (Uart.len == 1) && (Uart.bitCount == 7)) {
+                                               triggered = true;
+                                       }
                                        if(triggered) {
                                                if (!LogTrace(receivedCmd, 
                                                                                Uart.len, 
@@ -683,31 +687,24 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
                                        /* And also reset the demod code, which might have been */
                                        /* false-triggered by the commands from the reader. */
                                        DemodReset();
-                                       LED_B_OFF();
                                }
                                ReaderIsActive = (Uart.state != STATE_UNSYNCD);
                        }
 
-                       if(!ReaderIsActive) {           // no need to try decoding tag data if the reader is sending - and we cannot afford the time
+                       if (!ReaderIsActive) {          // no need to try decoding tag data if the reader is sending - and we cannot afford the time
                                uint8_t tagdata = (previous_data << 4) | (*data & 0x0F);
-                               if(ManchesterDecoding(tagdata, 0, (rsamples-1)*4)) {
-                                       LED_B_ON();
-
+                               if (ManchesterDecoding(tagdata, 0, (rsamples-1)*4)) {
                                        if (!LogTrace(receivedResponse, 
                                                                        Demod.len, 
                                                                        Demod.startTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER, 
                                                                        Demod.endTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER,
                                                                        Demod.parity,
                                                                        false)) break;
-
                                        if ((!triggered) && (param & 0x01)) triggered = true;
-
                                        // And ready to receive another response.
                                        DemodReset();
                                        // And reset the Miller decoder including itS (now outdated) input buffer
                                        UartInit(receivedCmd, receivedCmdPar);
-
-                                       LED_C_OFF();
                                } 
                                TagIsActive = (Demod.state != DEMOD_UNSYNCD);
                        }
@@ -721,12 +718,12 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
                }
        } // main cycle
 
-       DbpString("COMMAND FINISHED");
-
        FpgaDisableSscDma();
+       LEDsoff();
+
+       DbpString("COMMAND FINISHED");
        Dbprintf("maxDataLen=%d, Uart.state=%x, Uart.len=%d", maxDataLen, Uart.state, Uart.len);
        Dbprintf("traceLen=%d, Uart.output[0]=%08x", BigBuf_get_traceLen(), (uint32_t)Uart.output[0]);
-       LEDsoff();
 }
 
 //-----------------------------------------------------------------------------
@@ -1267,7 +1264,7 @@ static void PrepareDelayedTransfer(uint16_t delay)
 //-------------------------------------------------------------------------------------
 static void TransmitFor14443a(const uint8_t *cmd, uint16_t len, uint32_t *timing)
 {
-       
+       LED_D_ON();
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
 
        uint32_t ThisTransferTime = 0;
@@ -1471,6 +1468,7 @@ static int EmSendCmd14443aRaw(uint8_t *resp, uint16_t respLen)
        bool correctionNeeded;
 
        // Modulate Manchester
+       LED_D_OFF();
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_MOD);
 
        // include correction bit if necessary
@@ -2459,6 +2457,8 @@ void RAMFUNC SniffMifare(uint8_t param) {
 
        // C(red) A(yellow) B(green)
        LEDsoff();
+       LED_A_ON();
+       
        // init trace buffer
        clear_trace();
        set_tracing(true);
@@ -2494,8 +2494,6 @@ void RAMFUNC SniffMifare(uint8_t param) {
        // Setup for the DMA.
        FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE); // set transfer address and number of bytes. Start transfer.
 
-       LED_D_OFF();
-       
        // init sniffer
        MfSniffInit();
 
@@ -2507,7 +2505,6 @@ void RAMFUNC SniffMifare(uint8_t param) {
                        break;
                }
 
-               LED_A_ON();
                WDT_HIT();
                
                if ((sniffCounter & 0x0000FFFF) == 0) { // from time to time
@@ -2553,15 +2550,11 @@ void RAMFUNC SniffMifare(uint8_t param) {
                        AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE;
                }
 
-               LED_A_OFF();
-               
                if (sniffCounter & 0x01) {
 
                        if(!TagIsActive) {              // no need to try decoding tag data if the reader is sending
                                uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4);
                                if(MillerDecoding(readerdata, (sniffCounter-1)*4)) {
-                                       LED_B_ON();
-                                       LED_C_OFF();
 
                                        if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, true)) break;
 
@@ -2577,8 +2570,6 @@ void RAMFUNC SniffMifare(uint8_t param) {
                        if(!ReaderIsActive) {           // no need to try decoding tag data if the reader is sending
                                uint8_t tagdata = (previous_data << 4) | (*data & 0x0F);
                                if(ManchesterDecoding(tagdata, 0, (sniffCounter-1)*4)) {
-                                       LED_B_OFF();
-                                       LED_C_ON();
 
                                        if (MfSniffLogic(receivedResponse, Demod.len, Demod.parity, Demod.bitCount, false)) break;
 
@@ -2600,12 +2591,13 @@ void RAMFUNC SniffMifare(uint8_t param) {
 
        } // main cycle
 
+       FpgaDisableSscDma();
+       LEDsoff();
+
        DbpString("COMMAND FINISHED.");
 
-       FpgaDisableSscDma();
        FpgaDisableTracing();
        MfSniffEnd();
        
        Dbprintf("maxDataLen=%x, Uart.state=%x, Uart.len=%x", maxDataLen, Uart.state, Uart.len);
-       LEDsoff();
 }
index 13b8a174a567d2201b4fe9ff552ca02a22498c92..d988e2b9e4e6099964c702565d7ccdec3df99903 100644 (file)
@@ -1040,6 +1040,7 @@ void AcquireRawAdcSamplesIso15693(void)
 
 void SnoopIso15693(void)
 {
+       LED_A_ON();
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
        BigBuf_free();
 
@@ -1073,9 +1074,6 @@ void SnoopIso15693(void)
        }
        Dbprintf("Snoop started. Press button to stop.");
        
-       // Signal field is off, no reader signal, no tag signal
-       LEDsoff();
-       // And put the FPGA in the appropriate mode
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_SNOOP | FPGA_HF_READER_RX_XCORR_AMPLITUDE);
        SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
 
Impressum, Datenschutz