- Changed driver file proxmark3.inf to support both old and new Product/Vendor IDs (piwi)
### Added
+- Added `sc` smartcard (contact card) commands - reader, info, raw, upgrade, setclock, list (hardware version RDV4.0 only) must turn option on in makefile options (Willok, Iceman, marshmellow)
- Added a bitbang mode to `lf cmdread` if delay is 0 the cmd bits turn off and on the antenna with 0 and 1 respectively (marshmellow)
- Added PAC/Stanley detection to lf search (marshmellow)
- Added lf pac demod and lf pac read - extracts the raw blocks from a PAC/Stanley tag (marshmellow)
include ../common/Makefile_Enabled_Options.common
-ifneq (,$(findstring LCD,$(APP_CFLAGS)))
+ifneq (,$(findstring WITH_LCD,$(APP_CFLAGS)))
SRC_LCD = fonts.c LCD.c
else
SRC_LCD =
endif
-#SRC_LCD = fonts.c LCD.c
SRC_LF = lfops.c hitag2.c hitagS.c lfsampling.c pcf7931.c lfdemod.c protocols.c
SRC_ISO15693 = iso15693.c iso15693tools.c
SRC_ISO14443a = epa.c iso14443a.c mifareutil.c mifarecmd.c mifaresniff.c mifaresim.c
SRC_ISO14443b = iso14443b.c
SRC_CRAPTO1 = crypto1.c des.c
SRC_CRC = iso14443crc.c crc.c crc16.c crc32.c parity.c
+ifneq (,$(findstring WITH_SMARTCARD,$(APP_CFLAGS)))
+ SRC_SMARTCARD = i2c.c
+else
+ SRC_SMARTCARD =
+endif
#the FPGA bitstream files. Note: order matters!
FPGA_BITSTREAMS = fpga_lf.bit fpga_hf.bit
$(SRC_ISO15693) \
$(SRC_LF) \
$(SRC_ZLIB) \
+ $(SRC_SMARTCARD) \
appmain.c \
printf.c \
util.c \
#ifdef WITH_LCD
#include "LCD.h"
#endif
+#ifdef WITH_SMARTCARD
+ #include "i2c.h"
+#endif
+
// Craig Young - 14a stand-alone code
#ifdef WITH_ISO14443a
{
BigBuf_print_status();
Fpga_print_status();
+#ifdef WITH_SMARTCARD
+ I2C_print_status();
+#endif
printConfig(); //LF Sampling config
printUSBSpeed();
Dbprintf("Various");
- Dbprintf(" MF_DBGLEVEL......%d", MF_DBGLEVEL);
- Dbprintf(" ToSendMax........%d",ToSendMax);
- Dbprintf(" ToSendBit........%d",ToSendBit);
+ Dbprintf(" MF_DBGLEVEL........%d", MF_DBGLEVEL);
+ Dbprintf(" ToSendMax..........%d", ToSendMax);
+ Dbprintf(" ToSendBit..........%d", ToSendBit);
cmd_send(CMD_ACK,1,0,0,0,0);
}
HfSnoop(c->arg[0], c->arg[1]);
break;
#endif
+#ifdef WITH_SMARTCARD
+ case CMD_SMART_ATR: {
+ SmartCardAtr();
+ break;
+ }
+ case CMD_SMART_SETCLOCK:{
+ SmartCardSetClock(c->arg[0]);
+ break;
+ }
+ case CMD_SMART_RAW: {
+ SmartCardRaw(c->arg[0], c->arg[1], c->d.asBytes);
+ break;
+ }
+ case CMD_SMART_UPLOAD: {
+ // upload file from client
+ uint8_t *mem = BigBuf_get_addr();
+ memcpy( mem + c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
+ cmd_send(CMD_ACK,1,0,0,0,0);
+ break;
+ }
+ case CMD_SMART_UPGRADE: {
+ SmartCardUpgrade(c->arg[0]);
+ break;
+ }
+#endif
case CMD_BUFF_CLEAR:
BigBuf_Clear();
--- /dev/null
+//-----------------------------------------------------------------------------
+// Willok, June 2018
+// Edits by Iceman, July 2018
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// The main i2c code, for communications with smart card module
+//-----------------------------------------------------------------------------
+#include "i2c.h"
+#include "mifareutil.h" //for mf_dbglevel
+#include "string.h" //for memset memcmp
+
+// ¶¨ÒåÁ¬½ÓÒý½Å
+#define GPIO_RST AT91C_PIO_PA1
+#define GPIO_SCL AT91C_PIO_PA5
+#define GPIO_SDA AT91C_PIO_PA7
+
+#define SCL_H HIGH(GPIO_SCL)
+#define SCL_L LOW(GPIO_SCL)
+#define SDA_H HIGH(GPIO_SDA)
+#define SDA_L LOW(GPIO_SDA)
+
+#define SCL_read (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SCL)
+#define SDA_read (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SDA)
+
+#define I2C_ERROR "I2C_WaitAck Error"
+
+volatile unsigned long c;
+
+// Ö±½ÓʹÓÃÑ»·À´ÑÓʱ£¬Ò»¸öÑ»· 6 ÌõÖ¸Á48M£¬ Delay=1 ´ó¸ÅΪ 200kbps
+// timer.
+// I2CSpinDelayClk(4) = 12.31us
+// I2CSpinDelayClk(1) = 3.07us
+void __attribute__((optimize("O0"))) I2CSpinDelayClk(uint16_t delay) {
+ for (c = delay * 2; c; c--) {};
+}
+
+// ͨѶÑÓ³Ùº¯Êý communication delay function
+#define I2C_DELAY_1CLK I2CSpinDelayClk(1)
+#define I2C_DELAY_2CLK I2CSpinDelayClk(2)
+#define I2C_DELAY_XCLK(x) I2CSpinDelayClk((x))
+
+
+#define ISO7618_MAX_FRAME 255
+
+void I2C_init(void) {
+ // ÅäÖø´Î»Òý½Å£¬¹Ø±ÕÉÏÀ£¬ÍÆÍìÊä³ö£¬Ä¬Èϸß
+ // Configure reset pin, close up pull up, push-pull output, default high
+ AT91C_BASE_PIOA->PIO_PPUDR = GPIO_RST;
+ AT91C_BASE_PIOA->PIO_MDDR = GPIO_RST;
+
+ // ÅäÖà I2C Òý½Å£¬¿ªÆôÉÏÀ£¬¿ªÂ©Êä³ö
+ // Configure I2C pin, open up, open leakage
+ AT91C_BASE_PIOA->PIO_PPUER |= (GPIO_SCL | GPIO_SDA); // ´ò¿ªÉÏÀ Open up the pull up
+ AT91C_BASE_PIOA->PIO_MDER |= (GPIO_SCL | GPIO_SDA);
+
+ // ĬÈÏÈý¸ùÏßÈ«²¿À¸ß
+ // default three lines all pull up
+ AT91C_BASE_PIOA->PIO_SODR |= (GPIO_SCL | GPIO_SDA | GPIO_RST);
+
+ // ÔÊÐíÊä³ö
+ // allow output
+ AT91C_BASE_PIOA->PIO_OER |= (GPIO_SCL | GPIO_SDA | GPIO_RST);
+ AT91C_BASE_PIOA->PIO_PER |= (GPIO_SCL | GPIO_SDA | GPIO_RST);
+}
+
+
+// ÉèÖø´Î»×´Ì¬
+// set the reset state
+void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA) {
+ if (LineRST)
+ HIGH(GPIO_RST);
+ else
+ LOW(GPIO_RST);
+
+ if (LineSCK)
+ HIGH(GPIO_SCL);
+ else
+ LOW(GPIO_SCL);
+
+ if (LineSDA)
+ HIGH(GPIO_SDA);
+ else
+ LOW(GPIO_SDA);
+}
+
+// ¸´Î»½øÈëÖ÷³ÌÐò
+// Reset the SIM_Adapter, then enter the main program
+// Note: the SIM_Adapter will not enter the main program after power up. Please run this function before use SIM_Adapter.
+void I2C_Reset_EnterMainProgram(void) {
+ I2C_SetResetStatus(0, 0, 0); // ÀµÍ¸´Î»Ïß
+ SpinDelay(30);
+ I2C_SetResetStatus(1, 0, 0); // ½â³ý¸´Î»
+ SpinDelay(30);
+ I2C_SetResetStatus(1, 1, 1); // À¸ßÊý¾ÝÏß
+ SpinDelay(10);
+}
+
+// ¸´Î»½øÈëÒýµ¼Ä£Ê½
+// Reset the SIM_Adapter, then enter the bootloader program
+// Reserve£ºFor firmware update.
+void I2C_Reset_EnterBootloader(void) {
+ I2C_SetResetStatus(0, 1, 1); // ÀµÍ¸´Î»Ïß
+ SpinDelay(100);
+ I2C_SetResetStatus(1, 1, 1); // ½â³ý¸´Î»
+ SpinDelay(10);
+}
+
+// µÈ´ýʱÖÓ±ä¸ß
+// Wait for the clock to go High.
+bool WaitSCL_H_delay(uint32_t delay) {
+ while (delay--) {
+ if (SCL_read) {
+ return true;
+ }
+ I2C_DELAY_1CLK;
+ }
+ return false;
+}
+
+// 5000 * 3.07us = 15350us. 15.35ms
+bool WaitSCL_H(void) {
+ return WaitSCL_H_delay(5000);
+}
+
+// Wait max 300ms or until SCL goes LOW.
+// Which ever comes first
+bool WaitSCL_L_300ms(void) {
+ volatile uint16_t delay = 300;
+ while ( delay-- ) {
+ // exit on SCL LOW
+ if (!SCL_read)
+ return true;
+
+ SpinDelay(1);
+ }
+ return (delay == 0);
+}
+
+bool I2C_Start(void) {
+
+ I2C_DELAY_XCLK(4);
+ SDA_H; I2C_DELAY_1CLK;
+ SCL_H;
+ if (!WaitSCL_H()) return false;
+
+ I2C_DELAY_2CLK;
+
+ if (!SCL_read) return false;
+ if (!SDA_read) return false;
+
+ SDA_L; I2C_DELAY_2CLK;
+ return true;
+}
+
+bool I2C_WaitForSim() {
+ // variable delay here.
+ if (!WaitSCL_L_300ms())
+ return false;
+
+ // 8051 speaks with smart card.
+ // 1000*50*3.07 = 153.5ms
+ // 1byte transfer == 1ms
+ if (!WaitSCL_H_delay(2000*50) )
+ return false;
+
+ return true;
+}
+
+// send i2c STOP
+void I2C_Stop(void) {
+ SCL_L; I2C_DELAY_2CLK;
+ SDA_L; I2C_DELAY_2CLK;
+ SCL_H; I2C_DELAY_2CLK;
+ if (!WaitSCL_H()) return;
+ SDA_H;
+ I2C_DELAY_XCLK(8);
+}
+
+// Send i2c ACK
+void I2C_Ack(void) {
+ SCL_L; I2C_DELAY_2CLK;
+ SDA_L; I2C_DELAY_2CLK;
+ SCL_H; I2C_DELAY_2CLK;
+ SCL_L; I2C_DELAY_2CLK;
+}
+
+// Send i2c NACK
+void I2C_NoAck(void) {
+ SCL_L; I2C_DELAY_2CLK;
+ SDA_H; I2C_DELAY_2CLK;
+ SCL_H; I2C_DELAY_2CLK;
+ SCL_L; I2C_DELAY_2CLK;
+}
+
+bool I2C_WaitAck(void) {
+ SCL_L; I2C_DELAY_1CLK;
+ SDA_H; I2C_DELAY_1CLK;
+ SCL_H;
+ if (!WaitSCL_H())
+ return false;
+
+ I2C_DELAY_2CLK;
+ if (SDA_read) {
+ SCL_L;
+ return false;
+ }
+ SCL_L;
+ return true;
+}
+
+void I2C_SendByte(uint8_t data) {
+ uint8_t i = 8;
+
+ while (i--) {
+ SCL_L; I2C_DELAY_1CLK;
+
+ if (data & 0x80)
+ SDA_H;
+ else
+ SDA_L;
+
+ data <<= 1;
+ I2C_DELAY_1CLK;
+
+ SCL_H;
+ if (!WaitSCL_H())
+ return;
+
+ I2C_DELAY_2CLK;
+ }
+ SCL_L;
+}
+
+uint8_t I2C_ReadByte(void) {
+ uint8_t i = 8, b = 0;
+
+ SDA_H;
+ while (i--) {
+ b <<= 1;
+ SCL_L; I2C_DELAY_2CLK;
+ SCL_H;
+ if (!WaitSCL_H())
+ return 0;
+
+ I2C_DELAY_2CLK;
+ if (SDA_read)
+ b |= 0x01;
+ }
+ SCL_L;
+ return b;
+}
+
+// Sends one byte ( command to be written, SlaveDevice address)
+bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address) {
+ bool bBreak = true;
+ do {
+ if (!I2C_Start())
+ return false;
+ //[C0]
+ I2C_SendByte(device_address & 0xFE);
+ if (!I2C_WaitAck())
+ break;
+
+ I2C_SendByte(device_cmd);
+ if (!I2C_WaitAck())
+ break;
+
+ bBreak = false;
+ } while (false);
+
+ I2C_Stop();
+ if (bBreak) {
+ if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+ return false;
+ }
+ return true;
+}
+
+// дÈë1×Ö½ÚÊý¾Ý £¨´ýдÈëÊý¾Ý£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£©
+// Sends 1 byte data (Data to be written, command to be written , SlaveDevice address ).
+bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address) {
+ bool bBreak = true;
+ do {
+ if (!I2C_Start())
+ return false;
+
+ I2C_SendByte(device_address & 0xFE);
+ if (!I2C_WaitAck())
+ break;
+
+ I2C_SendByte(device_cmd);
+ if (!I2C_WaitAck())
+ break;
+
+ I2C_SendByte(data);
+ if (!I2C_WaitAck())
+ break;
+
+ bBreak = false;
+ } while (false);
+
+ I2C_Stop();
+ if (bBreak) {
+ if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+ return false;
+ }
+ return true;
+}
+
+// дÈë1´®Êý¾Ý£¨´ýдÈëÊý×éµØÖ·£¬´ýдÈ볤¶È£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£©
+//Sends a string of data (Array, length, command to be written , SlaveDevice address ).
+// len = uint8 (max buffer to write 256bytes)
+bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) {
+ bool bBreak = true;
+ do {
+ if (!I2C_Start())
+ return false;
+
+ I2C_SendByte(device_address & 0xFE);
+ if (!I2C_WaitAck())
+ break;
+
+ I2C_SendByte(device_cmd);
+ if (!I2C_WaitAck())
+ break;
+
+ while (len) {
+
+ I2C_SendByte(*data);
+ if (!I2C_WaitAck())
+ break;
+
+ len--;
+ data++;
+ }
+
+ if (len == 0)
+ bBreak = false;
+ } while (false);
+
+ I2C_Stop();
+ if (bBreak) {
+ if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+ return false;
+ }
+ return true;
+}
+
+// ¶Á³ö1´®Êý¾Ý£¨´æ·Å¶Á³öÊý¾Ý£¬´ý¶Á³ö³¤¶È£¬´ø¶Á³öµØÖ·£¬Æ÷¼þÀàÐÍ£©
+// read 1 strings of data (Data array, Readout length, command to be written , SlaveDevice address ).
+// len = uint8 (max buffer to read 256bytes)
+uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) {
+
+ if ( !data || len == 0 )
+ return 0;
+
+ // extra wait 500us (514us measured)
+ // 200us (xx measured)
+ SpinDelayUs(200);
+ bool bBreak = true;
+ uint8_t readcount = 0;
+
+ do {
+ if (!I2C_Start())
+ return 0;
+
+ // 0xB0 / 0xC0 == i2c write
+ I2C_SendByte(device_address & 0xFE);
+ if (!I2C_WaitAck())
+ break;
+
+ I2C_SendByte(device_cmd);
+ if (!I2C_WaitAck())
+ break;
+
+ // 0xB1 / 0xC1 == i2c read
+ I2C_Start();
+ I2C_SendByte(device_address | 1);
+ if (!I2C_WaitAck())
+ break;
+
+ bBreak = false;
+ } while (false);
+
+ if (bBreak) {
+ I2C_Stop();
+ if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+ return 0;
+ }
+
+ // reading
+ while (len) {
+
+ *data = I2C_ReadByte();
+
+ len--;
+
+ // ¶ÁÈ¡µÄµÚÒ»¸ö×Ö½ÚΪºóÐø³¤¶È
+ // The first byte in response is the message length
+ if (!readcount && (len > *data)) {
+ len = *data;
+ } else {
+ data++;
+ }
+ readcount++;
+
+ // acknowledgements. After last byte send NACK.
+ if (len == 0)
+ I2C_NoAck();
+ else
+ I2C_Ack();
+ }
+
+ I2C_Stop();
+ // return bytecount - first byte (which is length byte)
+ return (readcount) ? --readcount : 0;
+}
+
+uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) {
+ //START, 0xB0, 0x00, 0x00, START, 0xB1, xx, yy, zz, ......, STOP
+ bool bBreak = true;
+ uint8_t readcount = 0;
+
+ // sending
+ do {
+ if (!I2C_Start())
+ return 0;
+
+ // 0xB0 / 0xC0 i2c write
+ I2C_SendByte(device_address & 0xFE);
+ if (!I2C_WaitAck())
+ break;
+
+ // msb
+ I2C_SendByte(msb);
+ if (!I2C_WaitAck())
+ break;
+
+ // lsb
+ I2C_SendByte(lsb);
+ if (!I2C_WaitAck())
+ break;
+
+ // 0xB1 / 0xC1 i2c read
+ I2C_Start();
+ I2C_SendByte(device_address | 1);
+ if (!I2C_WaitAck())
+ break;
+
+ bBreak = false;
+ } while (false);
+
+ if (bBreak) {
+ I2C_Stop();
+ if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+ return 0;
+ }
+
+ // reading
+ while (len) {
+ *data = I2C_ReadByte();
+
+ data++;
+ readcount++;
+ len--;
+
+ // acknowledgements. After last byte send NACK.
+ if (len == 0)
+ I2C_NoAck();
+ else
+ I2C_Ack();
+ }
+
+ I2C_Stop();
+ return readcount;
+}
+
+bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) {
+ //START, 0xB0, 0x00, 0x00, xx, yy, zz, ......, STOP
+ bool bBreak = true;
+
+ do {
+ if (!I2C_Start())
+ return false;
+
+ // 0xB0 == i2c write
+ I2C_SendByte(device_address & 0xFE);
+ if (!I2C_WaitAck())
+ break;
+
+ // msb
+ I2C_SendByte(msb);
+ if (!I2C_WaitAck())
+ break;
+
+ // lsb
+ I2C_SendByte(lsb);
+ if (!I2C_WaitAck())
+ break;
+
+ while (len) {
+ I2C_SendByte(*data);
+ if (!I2C_WaitAck())
+ break;
+
+ len--;
+ data++;
+ }
+
+ if (len == 0)
+ bBreak = false;
+ } while (false);
+
+ I2C_Stop();
+ if (bBreak) {
+ if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+ return false;
+ }
+ return true;
+}
+
+void I2C_print_status(void) {
+ DbpString("Smart card module (ISO 7816)");
+ uint8_t resp[] = {0,0,0,0};
+ I2C_init();
+ I2C_Reset_EnterMainProgram();
+ uint8_t len = I2C_BufferRead(resp, sizeof(resp), I2C_DEVICE_CMD_GETVERSION, I2C_DEVICE_ADDRESS_MAIN);
+ if ( len > 0 )
+ Dbprintf(" version.................v%x.%02x", resp[0], resp[1]);
+ else
+ DbpString(" version.................FAILED");
+}
+
+bool GetATR(smart_card_atr_t *card_ptr) {
+
+ // clear
+ if ( card_ptr ) {
+ card_ptr->atr_len = 0;
+ memset(card_ptr->atr, 0, sizeof(card_ptr->atr));
+ }
+
+ // Send ATR
+ // start [C0 01] stop start C1 len aa bb cc stop]
+ I2C_WriteCmd(I2C_DEVICE_CMD_GENERATE_ATR, I2C_DEVICE_ADDRESS_MAIN);
+ uint8_t cmd[1] = {1};
+ LogTrace(cmd, 1, 0, 0, NULL, true);
+
+ //wait for sim card to answer.
+ if (!I2C_WaitForSim())
+ return false;
+
+ // read answer
+ uint8_t len = I2C_BufferRead(card_ptr->atr, sizeof(card_ptr->atr), I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
+
+ if ( len == 0 )
+ return false;
+
+ // for some reason we only get first byte of atr, if that is so, send dummy command to retrieve the rest of the atr
+ if (len == 1) {
+
+ uint8_t data[1] = {0};
+ I2C_BufferWrite(data, len, I2C_DEVICE_CMD_SEND, I2C_DEVICE_ADDRESS_MAIN);
+
+ if ( !I2C_WaitForSim() )
+ return false;
+
+ uint8_t len2 = I2C_BufferRead(card_ptr->atr + len, sizeof(card_ptr->atr) - len, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
+ len = len + len2;
+ }
+
+ if ( card_ptr ) {
+ card_ptr->atr_len = len;
+ LogTrace(card_ptr->atr, card_ptr->atr_len, 0, 0, NULL, false);
+ }
+
+ return true;
+}
+
+void SmartCardAtr(void) {
+ smart_card_atr_t card;
+ LED_D_ON();
+ clear_trace();
+ set_tracing(true);
+ I2C_init();
+ I2C_Reset_EnterMainProgram();
+ bool isOK = GetATR( &card );
+ cmd_send(CMD_ACK, isOK, sizeof(smart_card_atr_t), 0, &card, sizeof(smart_card_atr_t));
+ set_tracing(false);
+ LEDsoff();
+}
+
+void SmartCardRaw( uint64_t arg0, uint64_t arg1, uint8_t *data ) {
+
+ LED_D_ON();
+
+ uint8_t len = 0;
+ uint8_t *resp = BigBuf_malloc(ISO7618_MAX_FRAME);
+ smartcard_command_t flags = arg0;
+
+ if ((flags & SC_CONNECT))
+ clear_trace();
+
+ set_tracing(true);
+
+ if ((flags & SC_CONNECT)) {
+
+ I2C_init();
+ I2C_Reset_EnterMainProgram();
+
+ if ( !(flags & SC_NO_SELECT) ) {
+ smart_card_atr_t card;
+ bool gotATR = GetATR( &card );
+ //cmd_send(CMD_ACK, gotATR, sizeof(smart_card_atr_t), 0, &card, sizeof(smart_card_atr_t));
+ if ( !gotATR )
+ goto OUT;
+ }
+ }
+
+ if ((flags & SC_RAW)) {
+
+ LogTrace(data, arg1, 0, 0, NULL, true);
+
+ // Send raw bytes
+ // asBytes = A0 A4 00 00 02
+ // arg1 = len 5
+ I2C_BufferWrite(data, arg1, I2C_DEVICE_CMD_SEND, I2C_DEVICE_ADDRESS_MAIN);
+
+ if ( !I2C_WaitForSim() )
+ goto OUT;
+
+ len = I2C_BufferRead(resp, ISO7618_MAX_FRAME, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
+ LogTrace(resp, len, 0, 0, NULL, false);
+ }
+OUT:
+ cmd_send(CMD_ACK, len, 0, 0, resp, len);
+ set_tracing(false);
+ LEDsoff();
+}
+
+void SmartCardUpgrade(uint64_t arg0) {
+
+ LED_C_ON();
+
+ #define I2C_BLOCK_SIZE 128
+ // write. Sector0, with 11,22,33,44
+ // erase is 128bytes, and takes 50ms to execute
+
+ I2C_init();
+ I2C_Reset_EnterBootloader();
+
+ bool isOK = true;
+ uint8_t res = 0;
+ uint16_t length = arg0;
+ uint16_t pos = 0;
+ uint8_t *fwdata = BigBuf_get_addr();
+ uint8_t *verfiydata = BigBuf_malloc(I2C_BLOCK_SIZE);
+
+ while (length) {
+
+ uint8_t msb = (pos >> 8) & 0xFF;
+ uint8_t lsb = pos & 0xFF;
+
+ Dbprintf("FW %02X%02X", msb, lsb);
+
+ size_t size = MIN(I2C_BLOCK_SIZE, length);
+
+ // write
+ res = I2C_WriteFW(fwdata+pos, size, msb, lsb, I2C_DEVICE_ADDRESS_BOOT);
+ if ( !res ) {
+ DbpString("Writing failed");
+ isOK = false;
+ break;
+ }
+
+ // writing takes time.
+ SpinDelay(50);
+
+ // read
+ res = I2C_ReadFW(verfiydata, size, msb, lsb, I2C_DEVICE_ADDRESS_BOOT);
+ if ( res == 0) {
+ DbpString("Reading back failed");
+ isOK = false;
+ break;
+ }
+
+ // cmp
+ if ( 0 != memcmp(fwdata+pos, verfiydata, size)) {
+ DbpString("not equal data");
+ isOK = false;
+ break;
+ }
+
+ length -= size;
+ pos += size;
+ }
+ cmd_send(CMD_ACK, isOK, pos, 0, 0, 0);
+ LED_C_OFF();
+}
+
+// unfinished (or not needed?)
+//void SmartCardSetBaud(uint64_t arg0) {
+//}
+
+void SmartCardSetClock(uint64_t arg0) {
+ LED_D_ON();
+ set_tracing(true);
+ I2C_init();
+ I2C_Reset_EnterMainProgram();
+
+ // Send SIM CLC
+ // start [C0 05 xx] stop
+ I2C_WriteByte(arg0, I2C_DEVICE_CMD_SIM_CLC, I2C_DEVICE_ADDRESS_MAIN);
+
+ cmd_send(CMD_ACK, 1, 0, 0, 0, 0);
+ set_tracing(false);
+ LEDsoff();
+}
--- /dev/null
+//-----------------------------------------------------------------------------
+// Willok, June 2018
+// Edits by Iceman, July 2018
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// The main i2c code, for communications with smart card module
+//-----------------------------------------------------------------------------
+#ifndef __I2C_H
+#define __I2C_H
+
+#include <stddef.h>
+#include "proxmark3.h"
+#include "apps.h"
+#include "util.h"
+#include "BigBuf.h"
+#include "smartcard.h"
+
+#define I2C_DEVICE_ADDRESS_BOOT 0xB0
+#define I2C_DEVICE_ADDRESS_MAIN 0xC0
+
+#define I2C_DEVICE_CMD_GENERATE_ATR 0x01
+#define I2C_DEVICE_CMD_SEND 0x02
+#define I2C_DEVICE_CMD_READ 0x03
+#define I2C_DEVICE_CMD_SETBAUD 0x04
+#define I2C_DEVICE_CMD_SIM_CLC 0x05
+#define I2C_DEVICE_CMD_GETVERSION 0x06
+
+
+void I2C_init(void);
+void I2C_Reset(void);
+void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA);
+
+void I2C_Reset_EnterMainProgram(void);
+void I2C_Reset_EnterBootloader(void);
+
+bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address);
+
+bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address);
+bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address);
+uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address);
+
+// for firmware
+uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address);
+bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address);
+
+bool GetATR(smart_card_atr_t *card_ptr);
+
+// generic functions
+void SmartCardAtr(void);
+void SmartCardRaw(uint64_t arg0, uint64_t arg1, uint8_t *data);
+void SmartCardUpgrade(uint64_t arg0);
+//void SmartCardSetBaud(uint64_t arg0);
+void SmartCardSetClock(uint64_t arg0);
+void I2C_print_status(void);
+#endif
APP_CFLAGS =
include ../common/Makefile_Enabled_Options.common
CFLAGS += $(APP_CFLAGS)
+ifneq (,$(findstring WITH_SMARTCARD,$(APP_CFLAGS)))
+ SRC_SMARTCARD = cmdsmartcard.c
+else
+ SRC_SMARTCARD =
+endif
LUAPLATFORM = generic
platform = $(shell uname)
ui.c \
comms.c
-CMDSRCS = crapto1/crapto1.c\
+CMDSRCS = $(SRC_SMARTCARD) \
+ crapto1/crapto1.c\
crapto1/crypto1.c\
polarssl/des.c \
polarssl/aes.c\
$(patsubst %.cpp, $(OBJDIR)/%.d, $(QTGUISRCS)) \
$(OBJDIR)/proxmark3.d $(OBJDIR)/flash.d $(OBJDIR)/flasher.d $(OBJDIR)/fpga_compress.d
-
$(DEPENDENCY_FILES): ;
.PRECIOUS: $(DEPENDENCY_FILES)
-include $(DEPENDENCY_FILES)
-
int CmdHFList(const char *Cmd)
{
+ #ifdef WITH_SMARTCARD
+ PrintAndLog("TEST_WITH_SMARTCARD");
+ #endif
+ #ifdef WITH_TEST
+ PrintAndLog("TEST_WITH_TEST");
+ #endif
bool showWaitCycles = false;
bool markCRCBytes = false;
bool loadFromFile = false;
#include "util.h"
#include "util_posix.h"
#include "cmdscript.h"
-
+#ifdef WITH_SMARTCARD
+ #include "cmdsmartcard.h"
+#endif
static int CmdHelp(const char *Cmd);
static int CmdQuit(const char *Cmd);
{"hf", CmdHF, 1, "{ High Frequency commands... }"},
{"hw", CmdHW, 1, "{ Hardware commands... }"},
{"lf", CmdLF, 1, "{ Low Frequency commands... }"},
+#ifdef WITH_SMARTCARD
+ {"sc", CmdSmartcard,1,"{ Smartcard commands... }"},
+#endif
{"script",CmdScript,1, "{ Scripting commands }"},
{"quit", CmdQuit, 1, "Exit program"},
{"exit", CmdQuit, 1, "Exit program"},
--- /dev/null
+//-----------------------------------------------------------------------------
+// Copyright (C) 2018 iceman
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Proxmark3 RDV40 Smartcard module commands
+//-----------------------------------------------------------------------------
+#include "cmdsmartcard.h"
+#include "smartcard.h"
+#include "comms.h"
+#include "protocols.h"
+
+
+static int CmdHelp(const char *Cmd);
+
+int usage_sm_raw(void) {
+ PrintAndLog("Usage: sc raw [h|r|c] d <0A 0B 0C ... hex>");
+ PrintAndLog(" h : this help");
+ PrintAndLog(" r : do not read response");
+ PrintAndLog(" a : active signal field ON without select");
+ PrintAndLog(" s : active signal field ON with select");
+ PrintAndLog(" t : executes TLV decoder if it is possible");
+ PrintAndLog(" d <bytes> : bytes to send");
+ PrintAndLog("");
+ PrintAndLog("Examples:");
+ PrintAndLog(" sc raw d 11223344");
+ return 0;
+}
+int usage_sm_reader(void) {
+ PrintAndLog("Usage: sc reader [h|s]");
+ PrintAndLog(" h : this help");
+ PrintAndLog(" s : silent (no messages)");
+ PrintAndLog("");
+ PrintAndLog("Examples:");
+ PrintAndLog(" sc reader");
+ return 0;
+}
+int usage_sm_info(void) {
+ PrintAndLog("Usage: sc info [h|s]");
+ PrintAndLog(" h : this help");
+ PrintAndLog(" s : silent (no messages)");
+ PrintAndLog("");
+ PrintAndLog("Examples:");
+ PrintAndLog(" sc info");
+ return 0;
+}
+int usage_sm_upgrade(void) {
+ PrintAndLog("Upgrade firmware");
+ PrintAndLog("Usage: sc upgrade f <file name>");
+ PrintAndLog(" h : this help");
+ PrintAndLog(" f <filename> : firmware file name");
+ PrintAndLog("");
+ PrintAndLog("Examples:");
+ PrintAndLog(" sc upgrade f myfile");
+ PrintAndLog("");
+ PrintAndLog("WARNING - Dangerous command, do wrong and you will brick the smart card socket");
+ return 0;
+}
+int usage_sm_setclock(void) {
+ PrintAndLog("Usage: sc setclock [h] c <clockspeed>");
+ PrintAndLog(" h : this help");
+ PrintAndLog(" c <> : clockspeed (0 = 16mhz, 1=8mhz, 2=4mhz) ");
+ PrintAndLog("");
+ PrintAndLog("Examples:");
+ PrintAndLog(" sc setclock c 2");
+ return 0;
+}
+
+int CmdSmartRaw(const char *Cmd) {
+
+ int hexlen = 0;
+ bool active = false;
+ bool active_select = false;
+ uint8_t cmdp = 0;
+ bool errors = false, reply = true, decodeTLV = false, breakloop = false;
+ uint8_t data[USB_CMD_DATA_SIZE] = {0x00};
+
+ while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+ switch (tolower(param_getchar(Cmd, cmdp))) {
+ case 'h': return usage_sm_raw();
+ case 'r':
+ reply = false;
+ cmdp++;
+ break;
+ case 'a':
+ active = true;
+ cmdp++;
+ break;
+ case 's':
+ active_select = true;
+ cmdp++;
+ break;
+ case 't':
+ decodeTLV = true;
+ cmdp++;
+ break;
+ case 'd': {
+ switch (param_gethex_to_eol(Cmd, cmdp+1, data, sizeof(data), &hexlen)) {
+ case 1:
+ PrintAndLog("Invalid HEX value.");
+ return 1;
+ case 2:
+ PrintAndLog("Too many bytes. Max %d bytes", sizeof(data));
+ return 1;
+ case 3:
+ PrintAndLog("Hex must have an even number of digits.");
+ return 1;
+ }
+ cmdp++;
+ breakloop = true;
+ break;
+ }
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+
+ if ( breakloop )
+ break;
+ }
+
+ //Validations
+ if (errors || cmdp == 0 ) return usage_sm_raw();
+
+ // arg0 = RFU flags
+ // arg1 = length
+ UsbCommand c = {CMD_SMART_RAW, {0, hexlen, 0}};
+
+ if (active || active_select) {
+ c.arg[0] |= SC_CONNECT;
+ if (active)
+ c.arg[0] |= SC_NO_SELECT;
+ }
+
+ if (hexlen > 0) {
+ c.arg[0] |= SC_RAW;
+ }
+
+ memcpy(c.d.asBytes, data, hexlen );
+ clearCommandBuffer();
+ SendCommand(&c);
+
+ // reading response from smart card
+ if ( reply ) {
+ UsbCommand resp;
+ if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)) {
+ PrintAndLog("smart card response failed");
+ return 1;
+ }
+ uint32_t datalen = resp.arg[0];
+
+ if ( !datalen ) {
+ PrintAndLog("smart card response failed");
+ return 1;
+ }
+
+ PrintAndLog("received %i bytes", datalen);
+
+ if (!datalen)
+ return 1;
+
+ uint8_t *data = resp.d.asBytes;
+
+ // TLV decoder
+ if (decodeTLV ) {
+
+ if (datalen >= 2) {
+ PrintAndLog("%02x %02x | %s", data[datalen - 2], data[datalen - 1], GetAPDUCodeDescription(data[datalen - 2], data[datalen - 1]));
+ }
+ if (datalen > 4) {
+ TLVPrintFromBuffer(data, datalen - 2);
+ }
+ } else {
+ PrintAndLog("%s", sprint_hex(data, datalen));
+ }
+ }
+ return 0;
+}
+
+int CmdSmartUpgrade(const char *Cmd) {
+
+ PrintAndLog("WARNING - Smartcard socket firmware upgrade.");
+ PrintAndLog("Dangerous command, do wrong and you will brick the smart card socket");
+
+ FILE *f;
+ char filename[FILE_PATH_SIZE] = {0};
+ uint8_t cmdp = 0;
+ bool errors = false;
+
+ while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+ switch (tolower(param_getchar(Cmd, cmdp))) {
+ case 'f':
+ //File handling and reading
+ if ( param_getstr(Cmd, cmdp+1, filename, FILE_PATH_SIZE) >= FILE_PATH_SIZE ) {
+ PrintAndLog("Filename too long");
+ errors = true;
+ break;
+ }
+ cmdp += 2;
+ break;
+ case 'h':
+ return usage_sm_upgrade();
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ }
+
+ //Validations
+ if (errors || cmdp == 0 ) return usage_sm_upgrade();
+
+ // load file
+ f = fopen(filename, "rb");
+ if ( !f ) {
+ PrintAndLog("File: %s: not found or locked.", filename);
+ return 1;
+ }
+
+ // get filesize in order to malloc memory
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+
+ if (fsize < 0) {
+ PrintAndLog("error, when getting filesize");
+ fclose(f);
+ return 1;
+ }
+
+ uint8_t *dump = calloc(fsize, sizeof(uint8_t));
+ if (!dump) {
+ PrintAndLog("error, cannot allocate memory ");
+ fclose(f);
+ return 1;
+ }
+
+ size_t bytes_read = fread(dump, 1, fsize, f);
+ if (f)
+ fclose(f);
+
+ PrintAndLog("Smartcard socket firmware uploading to PM3");
+ //Send to device
+ uint32_t index = 0;
+ uint32_t bytes_sent = 0;
+ uint32_t bytes_remaining = bytes_read;
+
+ while (bytes_remaining > 0){
+ uint32_t bytes_in_packet = MIN(USB_CMD_DATA_SIZE, bytes_remaining);
+ UsbCommand c = {CMD_SMART_UPLOAD, {index + bytes_sent, bytes_in_packet, 0}};
+
+ // Fill usb bytes with 0xFF
+ memset(c.d.asBytes, 0xFF, USB_CMD_DATA_SIZE);
+ memcpy(c.d.asBytes, dump + bytes_sent, bytes_in_packet);
+ clearCommandBuffer();
+ SendCommand(&c);
+ if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2000) ) {
+ PrintAndLog("timeout while waiting for reply.");
+ free(dump);
+ return 1;
+ }
+
+ bytes_remaining -= bytes_in_packet;
+ bytes_sent += bytes_in_packet;
+ printf("."); fflush(stdout);
+ }
+ free(dump);
+ printf("\n");
+ PrintAndLog("Smartcard socket firmware updating, don\'t turn off your PM3!");
+
+ // trigger the firmware upgrade
+ UsbCommand c = {CMD_SMART_UPGRADE, {bytes_read, 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+ PrintAndLog("timeout while waiting for reply.");
+ return 1;
+ }
+ if ( (resp.arg[0] && 0xFF ) )
+ PrintAndLog("Smartcard socket firmware upgraded successful");
+ else
+ PrintAndLog("Smartcard socket firmware updating failed");
+ return 0;
+}
+
+int CmdSmartInfo(const char *Cmd){
+ uint8_t cmdp = 0;
+ bool errors = false, silent = false;
+
+ while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+ switch (tolower(param_getchar(Cmd, cmdp))) {
+ case 'h': return usage_sm_info();
+ case 's':
+ silent = true;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ cmdp++;
+ }
+
+ //Validations
+ if (errors ) return usage_sm_info();
+
+ UsbCommand c = {CMD_SMART_ATR, {0, 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+ if (!silent) PrintAndLog("smart card select failed");
+ return 1;
+ }
+
+ uint8_t isok = resp.arg[0] & 0xFF;
+ if (!isok) {
+ if (!silent) PrintAndLog("smart card select failed");
+ return 1;
+ }
+
+ smart_card_atr_t card;
+ memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t));
+
+ // print header
+ PrintAndLog("\n--- Smartcard Information ---------");
+ PrintAndLog("-------------------------------------------------------------");
+ PrintAndLog("ISO76183 ATR : %s", sprint_hex(card.atr, card.atr_len));
+ PrintAndLog("look up ATR");
+ PrintAndLog("http://smartcard-atr.appspot.com/parse?ATR=%s", sprint_hex_inrow(card.atr, card.atr_len) );
+ return 0;
+}
+
+int CmdSmartReader(const char *Cmd){
+ uint8_t cmdp = 0;
+ bool errors = false, silent = false;
+
+ while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+ switch (tolower(param_getchar(Cmd, cmdp))) {
+ case 'h': return usage_sm_reader();
+ case 's':
+ silent = true;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ cmdp++;
+ }
+
+ //Validations
+ if (errors ) return usage_sm_reader();
+
+ UsbCommand c = {CMD_SMART_ATR, {0, 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+ if (!silent) PrintAndLog("smart card select failed");
+ return 1;
+ }
+
+ uint8_t isok = resp.arg[0] & 0xFF;
+ if (!isok) {
+ if (!silent) PrintAndLog("smart card select failed");
+ return 1;
+ }
+ smart_card_atr_t card;
+ memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t));
+ PrintAndLog("ISO7816-3 ATR : %s", sprint_hex(card.atr, card.atr_len));
+ return 0;
+}
+
+int CmdSmartSetClock(const char *Cmd){
+ uint8_t cmdp = 0;
+ bool errors = false;
+ uint8_t clock = 0;
+ while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
+ switch (tolower(param_getchar(Cmd, cmdp))) {
+ case 'h': return usage_sm_setclock();
+ case 'c':
+ clock = param_get8ex(Cmd, cmdp+1, 2, 10);
+ if ( clock > 2)
+ errors = true;
+
+ cmdp += 2;
+ break;
+ default:
+ PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
+ errors = true;
+ break;
+ }
+ }
+
+ //Validations
+ if (errors || cmdp == 0) return usage_sm_setclock();
+
+ UsbCommand c = {CMD_SMART_SETCLOCK, {clock, 0, 0}};
+ clearCommandBuffer();
+ SendCommand(&c);
+ UsbCommand resp;
+ if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
+ PrintAndLog("smart card select failed");
+ return 1;
+ }
+
+ uint8_t isok = resp.arg[0] & 0xFF;
+ if (!isok) {
+ PrintAndLog("smart card set clock failed");
+ return 1;
+ }
+
+ switch (clock) {
+ case 0:
+ PrintAndLog("Clock changed to 16mhz giving 10800 baudrate");
+ break;
+ case 1:
+ PrintAndLog("Clock changed to 8mhz giving 21600 baudrate");
+ break;
+ case 2:
+ PrintAndLog("Clock changed to 4mhz giving 86400 baudrate");
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+
+// iso 7816-3
+void annotateIso7816(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize){
+ // S-block
+ if ( (cmd[0] & 0xC0) && (cmdsize == 3) ) {
+ switch ( (cmd[0] & 0x3f) ) {
+ case 0x00 : snprintf(exp, size, "S-block RESYNCH req"); break;
+ case 0x20 : snprintf(exp, size, "S-block RESYNCH resp"); break;
+ case 0x01 : snprintf(exp, size, "S-block IFS req"); break;
+ case 0x21 : snprintf(exp, size, "S-block IFS resp"); break;
+ case 0x02 : snprintf(exp, size, "S-block ABORT req"); break;
+ case 0x22 : snprintf(exp, size, "S-block ABORT resp"); break;
+ case 0x03 : snprintf(exp, size, "S-block WTX reqt"); break;
+ case 0x23 : snprintf(exp, size, "S-block WTX resp"); break;
+ default : snprintf(exp, size, "S-block"); break;
+ }
+ }
+ // R-block (ack)
+ else if ( ((cmd[0] & 0xD0) == 0x80) && ( cmdsize > 2) ) {
+ if ( (cmd[0] & 0x10) == 0 )
+ snprintf(exp, size, "R-block ACK");
+ else
+ snprintf(exp, size, "R-block NACK");
+ }
+ // I-block
+ else {
+
+ int pos = (cmd[0] == 2 || cmd[0] == 3) ? 2 : 3;
+ switch ( cmd[pos] ) {
+ case ISO7816_READ_BINARY :snprintf(exp, size, "READ BIN");break;
+ case ISO7816_WRITE_BINARY :snprintf(exp, size, "WRITE BIN");break;
+ case ISO7816_UPDATE_BINARY :snprintf(exp, size, "UPDATE BIN");break;
+ case ISO7816_ERASE_BINARY :snprintf(exp, size, "ERASE BIN");break;
+ case ISO7816_READ_RECORDS :snprintf(exp, size, "READ RECORDS");break;
+ case ISO7816_WRITE_RECORDS :snprintf(exp, size, "WRITE RECORDS");break;
+ case ISO7816_APPEND_RECORD :snprintf(exp, size, "APPEND RECORD");break;
+ case ISO7816_UPDATE_RECORD :snprintf(exp, size, "UPDATE RECORD");break;
+ case ISO7816_GET_DATA :snprintf(exp, size, "GET DATA");break;
+ case ISO7816_PUT_DATA :snprintf(exp, size, "PUT DATA");break;
+ case ISO7816_SELECT_FILE :snprintf(exp, size, "SELECT FILE");break;
+ case ISO7816_VERIFY :snprintf(exp, size, "VERIFY");break;
+ case ISO7816_INTERNAL_AUTHENTICATION :snprintf(exp, size, "INTERNAL AUTH");break;
+ case ISO7816_EXTERNAL_AUTHENTICATION :snprintf(exp, size, "EXTERNAL AUTH");break;
+ case ISO7816_GET_CHALLENGE :snprintf(exp, size, "GET CHALLENGE");break;
+ case ISO7816_MANAGE_CHANNEL :snprintf(exp, size, "MANAGE CHANNEL");break;
+ default :snprintf(exp, size, "?"); break;
+ }
+ }
+}
+
+
+uint16_t printScTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace) {
+ // sanity check
+ if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) > traceLen) return traceLen;
+
+ bool isResponse;
+ uint16_t data_len, parity_len;
+ uint32_t duration, timestamp, first_timestamp, EndOfTransmissionTimestamp;
+ char explanation[30] = {0};
+
+ first_timestamp = *((uint32_t *)(trace));
+ timestamp = *((uint32_t *)(trace + tracepos));
+ tracepos += 4;
+
+ duration = *((uint16_t *)(trace + tracepos));
+ tracepos += 2;
+
+ data_len = *((uint16_t *)(trace + tracepos));
+ tracepos += 2;
+
+ if (data_len & 0x8000) {
+ data_len &= 0x7fff;
+ isResponse = true;
+ } else {
+ isResponse = false;
+ }
+
+ parity_len = (data_len-1)/8 + 1;
+ if (tracepos + data_len + parity_len > traceLen) {
+ return traceLen;
+ }
+ uint8_t *frame = trace + tracepos;
+ tracepos += data_len;
+ //uint8_t *parityBytes = trace + tracepos;
+ tracepos += parity_len;
+
+ //--- Draw the data column
+ char line[18][110];
+
+ if (data_len == 0 ) {
+ sprintf(line[0],"<empty trace - possible error>");
+ return tracepos;
+ }
+
+ for (int j = 0; j < data_len && j/18 < 18; j++) {
+ snprintf(line[j/18]+(( j % 18) * 4),110, "%02x ", frame[j]);
+ }
+
+ EndOfTransmissionTimestamp = timestamp + duration;
+
+ annotateIso7816(explanation,sizeof(explanation),frame,data_len);
+
+ int num_lines = MIN((data_len - 1)/18 + 1, 18);
+ for (int j = 0; j < num_lines ; j++) {
+ if (j == 0) {
+ PrintAndLog(" %10u | %10u | %s |%-72s | %s| %s",
+ (timestamp - first_timestamp),
+ (EndOfTransmissionTimestamp - first_timestamp),
+ (isResponse ? "Tag" : "Rdr"),
+ line[j],
+ " ",
+ (j == num_lines-1) ? explanation : "");
+ } else {
+ PrintAndLog(" | | |%-72s | %s| %s",
+ line[j],
+ " ",
+ (j == num_lines-1) ? explanation : "");
+ }
+ }
+
+ // if is last record
+ if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) >= traceLen) return traceLen;
+
+ return tracepos;
+}
+
+int ScTraceList(const char *Cmd) {
+ bool loadFromFile = false;
+ bool saveToFile = false;
+ char type[5] = {0};
+ char filename[FILE_PATH_SIZE] = {0};
+
+ // parse command line
+ param_getstr(Cmd, 0, type, sizeof(type));
+ param_getstr(Cmd, 1, filename, sizeof(filename));
+
+ bool errors = false;
+ if(type[0] == 'h') {
+ errors = true;
+ }
+
+ if(!errors) {
+ if (strcmp(type, "s") == 0) {
+ saveToFile = true;
+ } else if (strcmp(type,"l") == 0) {
+ loadFromFile = true;
+ }
+ }
+
+ if ((loadFromFile || saveToFile) && strlen(filename) == 0) {
+ errors = true;
+ }
+
+ if (loadFromFile && saveToFile) {
+ errors = true;
+ }
+
+ if (errors) {
+ PrintAndLog("List or save protocol data.");
+ PrintAndLog("Usage: sc list [l <filename>]");
+ PrintAndLog(" sc list [s <filename>]");
+ PrintAndLog(" l - load data from file instead of trace buffer");
+ PrintAndLog(" s - save data to file");
+ PrintAndLog("");
+ PrintAndLog("example: sc list");
+ PrintAndLog("example: sc list save myCardTrace.trc");
+ PrintAndLog("example: sc list l myCardTrace.trc");
+ return 0;
+ }
+
+ uint8_t *trace;
+ uint32_t tracepos = 0;
+ uint32_t traceLen = 0;
+
+ if (loadFromFile) {
+ #define TRACE_CHUNK_SIZE (1<<16) // 64K to start with. Will be enough for BigBuf and some room for future extensions
+ FILE *tracefile = NULL;
+ size_t bytes_read;
+ trace = malloc(TRACE_CHUNK_SIZE);
+ if (trace == NULL) {
+ PrintAndLog("Cannot allocate memory for trace");
+ return 2;
+ }
+ if ((tracefile = fopen(filename,"rb")) == NULL) {
+ PrintAndLog("Could not open file %s", filename);
+ free(trace);
+ return 0;
+ }
+ while (!feof(tracefile)) {
+ bytes_read = fread(trace+traceLen, 1, TRACE_CHUNK_SIZE, tracefile);
+ traceLen += bytes_read;
+ if (!feof(tracefile)) {
+ uint8_t *p = realloc(trace, traceLen + TRACE_CHUNK_SIZE);
+ if (p == NULL) {
+ PrintAndLog("Cannot allocate memory for trace");
+ free(trace);
+ fclose(tracefile);
+ return 2;
+ }
+ trace = p;
+ }
+ }
+ fclose(tracefile);
+ } else {
+ trace = malloc(USB_CMD_DATA_SIZE);
+ // Query for the size of the trace
+ UsbCommand response;
+ GetFromBigBuf(trace, USB_CMD_DATA_SIZE, 0, &response, -1, false);
+ traceLen = response.arg[2];
+ if (traceLen > USB_CMD_DATA_SIZE) {
+ uint8_t *p = realloc(trace, traceLen);
+ if (p == NULL) {
+ PrintAndLog("Cannot allocate memory for trace");
+ free(trace);
+ return 2;
+ }
+ trace = p;
+ GetFromBigBuf(trace, traceLen, 0, NULL, -1, false);
+ }
+ }
+
+ if (saveToFile) {
+ FILE *tracefile = NULL;
+ if ((tracefile = fopen(filename,"wb")) == NULL) {
+ PrintAndLog("Could not create file %s", filename);
+ return 1;
+ }
+ fwrite(trace, 1, traceLen, tracefile);
+ PrintAndLog("Recorded Activity (TraceLen = %d bytes) written to file %s", traceLen, filename);
+ fclose(tracefile);
+ } else {
+ PrintAndLog("Recorded Activity (TraceLen = %d bytes)", traceLen);
+ PrintAndLog("");
+ PrintAndLog("Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer");
+ PrintAndLog("");
+ PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC | Annotation |");
+ PrintAndLog("------------|------------|-----|-------------------------------------------------------------------------|-----|--------------------|");
+
+ while(tracepos < traceLen)
+ {
+ tracepos = printScTraceLine(tracepos, traceLen, trace);
+ }
+ }
+
+ free(trace);
+ return 0;
+}
+
+int CmdSmartList(const char *Cmd) {
+ ScTraceList(Cmd);
+ return 0;
+}
+
+static command_t CommandTable[] = {
+ {"help", CmdHelp, 1, "This help"},
+ {"list", CmdSmartList, 0, "List ISO 7816 history"},
+ {"info", CmdSmartInfo, 1, "Tag information [rdv40]"},
+ {"reader", CmdSmartReader, 1, "Act like an IS07816 reader [rdv40]"},
+ {"raw", CmdSmartRaw, 1, "Send raw hex data to tag [rdv40]"},
+ {"upgrade", CmdSmartUpgrade, 1, "Upgrade firmware [rdv40]"},
+ {"setclock",CmdSmartSetClock, 1, "Set clock speed"},
+ {NULL, NULL, 0, NULL}
+};
+
+int CmdSmartcard(const char *Cmd) {
+ clearCommandBuffer();
+ CmdsParse(CommandTable, Cmd);
+ return 0;
+}
+
+int CmdHelp(const char *Cmd) {
+ CmdsHelp(CommandTable);
+ return 0;
+}
--- /dev/null
+//-----------------------------------------------------------------------------
+// Copyright (C) 2018 iceman
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Proxmark3 RDV40 Smartcard module commands
+//-----------------------------------------------------------------------------
+
+#ifndef CMDSMARTCARD_H__
+#define CMDSMARTCARD_H__
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+#include "proxmark3.h"
+#include "ui.h"
+#include "cmdparser.h"
+#include "common.h"
+#include "util.h"
+#include "loclass/fileutils.h" // saveFile
+#include "cmdmain.h" // getfromdevice
+#include "emv/emvcore.h" // decodeTVL
+#include "emv/apduinfo.h" // APDUcode description
+
+extern int CmdSmartcard(const char *Cmd);
+
+extern int CmdSmartRaw(const char* cmd);
+extern int CmdSmartUpgrade(const char* cmd);
+extern int CmdSmartInfo(const char* cmd);
+extern int CmdSmartReader(const char *Cmd);
+
+extern int usage_sm_raw(void);
+extern int usage_sm_reader(void);
+extern int usage_sm_info(void);
+extern int usage_sm_upgrade(void);
+#endif
//
// NOTES:
// LF Demod functions are placed here to allow the flexability to use client or
-// device side. Most BUT NOT ALL of these functions are currenlty safe for
-// device side use currently. (DetectST for example...)
+// device side. Most BUT NOT ALL of these functions are currently safe for
+// device side use. (DetectST for example...)
//
// There are likely many improvements to the code that could be made, please
// make suggestions...
#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
-#define ISO_14443A 0
-#define ICLASS 1
-#define ISO_14443B 2
-#define TOPAZ 3
-#define PROTO_MIFARE 4
+#define ISO_14443A 0
+#define ICLASS 1
+#define ISO_14443B 2
+#define TOPAZ 3
+#define PROTO_MIFARE 4
+#define ISO_7816_4 5
//-- Picopass fuses
#define FUSE_FPERS 0x80
#define FUSE_FPROD0 0x02
#define FUSE_RA 0x01
+// ISO 7816-4 Basic interindustry commands. For command APDU's.
+#define ISO7816_READ_BINARY 0xB0
+#define ISO7816_WRITE_BINARY 0xD0
+#define ISO7816_UPDATE_BINARY 0xD6
+#define ISO7816_ERASE_BINARY 0x0E
+#define ISO7816_READ_RECORDS 0xB2
+#define ISO7816_WRITE_RECORDS 0xD2
+#define ISO7816_APPEND_RECORD 0xE2
+#define ISO7816_UPDATE_RECORD 0xDC
+#define ISO7816_GET_DATA 0xCA
+#define ISO7816_PUT_DATA 0xDA
+#define ISO7816_SELECT_FILE 0xA4
+#define ISO7816_VERIFY 0x20
+#define ISO7816_INTERNAL_AUTHENTICATION 0x88
+#define ISO7816_EXTERNAL_AUTHENTICATION 0x82
+#define ISO7816_GET_CHALLENGE 0xB4
+#define ISO7816_MANAGE_CHANNEL 0x70
+// ISO7816-4 For response APDU's
+#define ISO7816_OK 0x9000
+// 6x xx = ERROR
+
+
+
void printIclassDumpInfo(uint8_t* iclass_dump);
void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb);
--- /dev/null
+//-----------------------------------------------------------------------------
+// (c) 2018 Iceman, adapted by Marshmellow
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// smart card type prototyping
+//-----------------------------------------------------------------------------
+#ifndef __SMARTCARD_H
+#define __SMARTCARD_H
+
+//-----------------------------------------------------------------------------
+// ISO 7618 Smart Card
+//-----------------------------------------------------------------------------
+typedef struct {
+ uint8_t atr_len;
+ uint8_t atr[30];
+} __attribute__((__packed__)) smart_card_atr_t;
+
+typedef enum SMARTCARD_COMMAND {
+ SC_CONNECT = (1 << 0),
+ SC_NO_DISCONNECT = (1 << 1),
+ SC_RAW = (1 << 2),
+ SC_NO_SELECT = (1 << 3)
+} smartcard_command_t;
+
+
+#endif
#define CMD_BUFF_CLEAR 0x0105
#define CMD_READ_MEM 0x0106
#define CMD_VERSION 0x0107
-#define CMD_STATUS 0x0108
-#define CMD_PING 0x0109
+#define CMD_STATUS 0x0108
+#define CMD_PING 0x0109
+
+// RDV40, Smart card operations
+#define CMD_SMART_RAW 0x0140
+#define CMD_SMART_UPGRADE 0x0141
+#define CMD_SMART_UPLOAD 0x0142
+#define CMD_SMART_ATR 0x0143
+// CMD_SMART_SETBAUD is unused for now
+#define CMD_SMART_SETBAUD 0x0144
+#define CMD_SMART_SETCLOCK 0x0145
// For low-frequency tags
#define CMD_READ_TI_TYPE 0x0202
#define CMD_READER_HITAG 0x0372
#define CMD_SIMULATE_HITAG_S 0x0368
-#define CMD_TEST_HITAGS_TRACES 0x0367
-#define CMD_READ_HITAG_S 0x0373
-#define CMD_WR_HITAG_S 0x0375
-#define CMD_EMU_HITAG_S 0x0376
+#define CMD_TEST_HITAGS_TRACES 0x0367
+#define CMD_READ_HITAG_S 0x0373
+#define CMD_WR_HITAG_S 0x0375
+#define CMD_EMU_HITAG_S 0x0376
#define CMD_SIMULATE_TAG_ISO_14443B 0x0381
projects / proxmark3-svn / commitdiff