// is the order in which they go out on the wire.
//=============================================================================
-uint8_t ToSend[512];
+#define TOSEND_BUFFER_SIZE (9*MAX_FRAME_SIZE + 1 + 1 + 2) // 8 data bits and 1 parity bit per payload byte, 1 correction bit, 1 SOC bit, 2 EOC bits
+uint8_t ToSend[TOSEND_BUFFER_SIZE];
int ToSendMax;
static int ToSendBit;
struct common_area common_area __attribute__((section(".commonarea")));
ToSendBit++;
- if(ToSendBit >= sizeof(ToSend)) {
+ if(ToSendMax >= sizeof(ToSend)) {
ToSendBit = 0;
DbpString("ToSendStuffBit overflowed!");
}
void MeasureAntennaTuning(void)
{
- uint8_t *dest = (uint8_t *)BigBuf+FREE_BUFFER_OFFSET;
+ uint8_t LF_Results[256];
int i, adcval = 0, peak = 0, peakv = 0, peakf = 0; //ptr = 0
int vLf125 = 0, vLf134 = 0, vHf = 0; // in mV
-// UsbCommand c;
-
- LED_B_ON();
- DbpString("Measuring antenna characteristics, please wait...");
- memset(dest,0,FREE_BUFFER_SIZE);
+ LED_B_ON();
/*
* Sweeps the useful LF range of the proxmark from
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
- for (i=255; i>19; i--) {
+ for (i=255; i>=19; i--) {
WDT_HIT();
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
SpinDelay(20);
if (i==95) vLf125 = adcval; // voltage at 125Khz
if (i==89) vLf134 = adcval; // voltage at 134Khz
- dest[i] = adcval>>8; // scale int to fit in byte for graphing purposes
- if(dest[i] > peak) {
+ LF_Results[i] = adcval>>8; // scale int to fit in byte for graphing purposes
+ if(LF_Results[i] > peak) {
peakv = adcval;
- peak = dest[i];
+ peak = LF_Results[i];
peakf = i;
//ptr = i;
}
}
- LED_A_ON();
+ for (i=18; i >= 0; i--) LF_Results[i] = 0;
+
+ LED_A_ON();
// Let the FPGA drive the high-frequency antenna around 13.56 MHz.
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
// can measure voltages up to 33000 mV
vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;
-// c.cmd = CMD_MEASURED_ANTENNA_TUNING;
-// c.arg[0] = (vLf125 << 0) | (vLf134 << 16);
-// c.arg[1] = vHf;
-// c.arg[2] = peakf | (peakv << 16);
-
- DbpString("Measuring complete, sending report back to host");
- cmd_send(CMD_MEASURED_ANTENNA_TUNING,vLf125|(vLf134<<16),vHf,peakf|(peakv<<16),0,0);
-// UsbSendPacket((uint8_t *)&c, sizeof(c));
+ cmd_send(CMD_MEASURED_ANTENNA_TUNING,vLf125|(vLf134<<16),vHf,peakf|(peakv<<16),LF_Results,256);
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- LED_A_OFF();
- LED_B_OFF();
- return;
+ LED_A_OFF();
+ LED_B_OFF();
+ return;
}
void MeasureAntennaTuningHf(void)
// The large multi-purpose buffer, typically used to hold A/D samples,
// maybe processed in some way.
-uint32_t BigBuf[10000];
-// BIG CHANGE - UNDERSTAND THIS BEFORE WE COMMIT
-#define TRACE_OFFSET 0
-#define TRACE_SIZE 3000
-#define RECV_CMD_OFFSET 3032
-#define RECV_CMD_SIZE 64
-#define RECV_RES_OFFSET 3096
-#define RECV_RES_SIZE 64
-#define DMA_BUFFER_OFFSET 3160
-#define DMA_BUFFER_SIZE 4096
-#define FREE_BUFFER_OFFSET 7256
-#define FREE_BUFFER_SIZE 2744
+#define BIGBUF_SIZE 40000
+uint32_t BigBuf[BIGBUF_SIZE / sizeof(uint32_t)];
+#define TRACE_OFFSET 0
+#define TRACE_SIZE 3000
+#define RECV_CMD_OFFSET (TRACE_OFFSET + TRACE_SIZE)
+#define MAX_FRAME_SIZE 256
+#define MAX_PARITY_SIZE ((MAX_FRAME_SIZE + 1)/ 8)
+#define RECV_CMD_PAR_OFFSET (RECV_CMD_OFFSET + MAX_FRAME_SIZE)
+#define RECV_RESP_OFFSET (RECV_CMD_PAR_OFFSET + MAX_PARITY_SIZE)
+#define RECV_RESP_PAR_OFFSET (RECV_RESP_OFFSET + MAX_FRAME_SIZE)
+#define CARD_MEMORY_OFFSET (RECV_RESP_PAR_OFFSET + MAX_PARITY_SIZE)
+#define CARD_MEMORY_SIZE 4096
+#define DMA_BUFFER_OFFSET CARD_MEMORY_OFFSET
+#define DMA_BUFFER_SIZE CARD_MEMORY_SIZE
+#define FREE_BUFFER_OFFSET (CARD_MEMORY_OFFSET + CARD_MEMORY_SIZE)
+#define FREE_BUFFER_SIZE (BIGBUF_SIZE - FREE_BUFFER_OFFSET - 1)
extern const uint8_t OddByteParity[256];
extern uint8_t *trace; // = (uint8_t *) BigBuf;
void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data);
void ReaderIso14443a(UsbCommand * c);
// Also used in iclass.c
-bool RAMFUNC LogTrace(const uint8_t * btBytes, uint8_t iLen, uint32_t iSamples, uint32_t dwParity, bool readerToTag);
-uint32_t GetParity(const uint8_t * pbtCmd, int iLen);
+bool RAMFUNC LogTrace(const uint8_t *btBytes, uint16_t len, uint32_t timestamp_start, uint32_t timestamp_end, uint8_t *parity, bool readerToTag);
+void GetParity(const uint8_t *pbtCmd, uint16_t len, uint8_t *parity);
void iso14a_set_trigger(bool enable);
void iso14a_clear_trace();
void iso14a_set_tracing(bool enable);
if (data[index] == 0x31 || data[index] == 0x30) {
// enter the set (skip tag + length)
index += 2;
- // extended length
+ // check for extended length
if ((data[index - 1] & 0x80) != 0) {
- index += (data[index] & 0x7F);
+ index += (data[index-1] & 0x7F);
}
}
// OID
// send the PPS request
ReaderTransmit((uint8_t *)pps, sizeof(pps), NULL);
uint8_t pps_response[3];
- return_code = ReaderReceive(pps_response);
+ uint8_t pps_response_par[1];
+ return_code = ReaderReceive(pps_response, pps_response_par);
if (return_code != 3 || pps_response[0] != 0xD0) {
return return_code == 0 ? 2 : return_code;
}
int nOutOfCnt;
int OutOfCnt;
int syncBit;
- int parityBits;
int samples;
int highCnt;
int swapper;
int counter;
int bitBuffer;
int dropPosition;
- uint8_t *output;
+ uint8_t *output;
} Uart;
static RAMFUNC int OutOfNDecoding(int bit)
if(Uart.byteCnt == 0) {
// Its not straightforward to show single EOFs
// So just leave it and do not return TRUE
- Uart.output[Uart.byteCnt] = 0xf0;
+ Uart.output[0] = 0xf0;
Uart.byteCnt++;
-
- // Calculate the parity bit for the client...
- Uart.parityBits = 1;
}
else {
return TRUE;
if(Uart.bitCnt == 8) {
Uart.output[Uart.byteCnt] = (Uart.shiftReg & 0xff);
Uart.byteCnt++;
-
- // Calculate the parity bit for the client...
- Uart.parityBits <<= 1;
- Uart.parityBits ^= OddByteParity[(Uart.shiftReg & 0xff)];
-
Uart.bitCnt = 0;
Uart.shiftReg = 0;
}
Uart.dropPosition--;
Uart.output[Uart.byteCnt] = (Uart.dropPosition & 0xff);
Uart.byteCnt++;
-
- // Calculate the parity bit for the client...
- Uart.parityBits <<= 1;
- Uart.parityBits ^= OddByteParity[(Uart.dropPosition & 0xff)];
-
Uart.bitCnt = 0;
Uart.shiftReg = 0;
Uart.nOutOfCnt = 0;
Uart.state = STATE_START_OF_COMMUNICATION;
Uart.bitCnt = 0;
Uart.byteCnt = 0;
- Uart.parityBits = 0;
Uart.nOutOfCnt = 0;
Uart.OutOfCnt = 4; // Start at 1/4, could switch to 1/256
Uart.dropPosition = 0;
int bitCount;
int posCount;
int syncBit;
- int parityBits;
uint16_t shiftReg;
int buffer;
int buffer2;
SUB_SECOND_HALF,
SUB_BOTH
} sub;
- uint8_t *output;
+ uint8_t *output;
} Demod;
static RAMFUNC int ManchesterDecoding(int v)
Demod.sub = SUB_FIRST_HALF;
Demod.bitCount = 0;
Demod.shiftReg = 0;
- Demod.parityBits = 0;
Demod.samples = 0;
if(Demod.posCount) {
//if(trigger) LED_A_OFF(); // Not useful in this case...
if(Demod.state == DEMOD_SOF_COMPLETE) {
Demod.output[Demod.len] = 0x0f;
Demod.len++;
- Demod.parityBits <<= 1;
- Demod.parityBits ^= OddByteParity[0x0f];
Demod.state = DEMOD_UNSYNCD;
// error = 0x0f;
return TRUE;
// Tag response does not need to be a complete byte!
if(Demod.len > 0 || Demod.bitCount > 0) {
if(Demod.bitCount > 1) { // was > 0, do not interpret last closing bit, is part of EOF
- Demod.shiftReg >>= (9 - Demod.bitCount);
+ Demod.shiftReg >>= (9 - Demod.bitCount); // right align data
Demod.output[Demod.len] = Demod.shiftReg & 0xff;
Demod.len++;
- // No parity bit, so just shift a 0
- Demod.parityBits <<= 1;
}
Demod.state = DEMOD_UNSYNCD;
Demod.shiftReg >>= 1;
Demod.output[Demod.len] = (Demod.shiftReg & 0xff);
Demod.len++;
-
- // FOR ISO15639 PARITY NOT SEND OTA, JUST CALCULATE IT FOR THE CLIENT
- Demod.parityBits <<= 1;
- Demod.parityBits ^= OddByteParity[(Demod.shiftReg & 0xff)];
-
Demod.bitCount = 0;
Demod.shiftReg = 0;
}
// So 32 should be enough!
uint8_t *readerToTagCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET);
// The response (tag -> reader) that we're receiving.
- uint8_t *tagToReaderResponse = (((uint8_t *)BigBuf) + RECV_RES_OFFSET);
-
+ uint8_t *tagToReaderResponse = (((uint8_t *)BigBuf) + RECV_RESP_OFFSET);
+
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
// reset traceLen to 0
//if(!LogTrace(Uart.output,Uart.byteCnt, rsamples, Uart.parityBits,TRUE)) break;
//if(!LogTrace(NULL, 0, Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, 0, TRUE)) break;
- if(tracing)
- {
- LogTrace(Uart.output,Uart.byteCnt, (GetCountSspClk()-time_0) << 4, Uart.parityBits,TRUE);
- LogTrace(NULL, 0, (GetCountSspClk()-time_0) << 4, 0, TRUE);
+ if(tracing) {
+ uint8_t parity[MAX_PARITY_SIZE];
+ GetParity(Uart.output, Uart.byteCnt, parity);
+ LogTrace(Uart.output,Uart.byteCnt, (GetCountSspClk()-time_0) << 4, (GetCountSspClk()-time_0) << 4, parity, TRUE);
}
rsamples = samples - Demod.samples;
LED_B_ON();
- if(tracing)
- {
- LogTrace(Demod.output,Demod.len, (GetCountSspClk()-time_0) << 4 , Demod.parityBits,FALSE);
- LogTrace(NULL, 0, (GetCountSspClk()-time_0) << 4, 0, FALSE);
+ if(tracing) {
+ uint8_t parity[MAX_PARITY_SIZE];
+ GetParity(Demod.output, Demod.len, parity);
+ LogTrace(Demod.output, Demod.len, (GetCountSspClk()-time_0) << 4, (GetCountSspClk()-time_0) << 4, parity, FALSE);
}
// + 1720..
uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET);
- memset(receivedCmd, 0x44, RECV_CMD_SIZE);
+ memset(receivedCmd, 0x44, MAX_FRAME_SIZE);
int len;
// Prepare card messages
}
if (tracing) {
- LogTrace(receivedCmd,len, (r2t_time-time_0)<< 4, Uart.parityBits,TRUE);
- LogTrace(NULL,0, (r2t_time-time_0) << 4, 0,TRUE);
+ uint8_t parity[MAX_PARITY_SIZE];
+ GetParity(receivedCmd, len, parity);
+ LogTrace(receivedCmd,len, (r2t_time-time_0)<< 4, (r2t_time-time_0) << 4, parity, TRUE);
if (respdata != NULL) {
- LogTrace(respdata,respsize, (t2r_time-time_0) << 4,SwapBits(GetParity(respdata,respsize),respsize),FALSE);
- LogTrace(NULL,0, (t2r_time-time_0) << 4,0,FALSE);
-
-
+ GetParity(respdata, respsize, parity);
+ LogTrace(respdata, respsize, (t2r_time-time_0) << 4, (t2r_time-time_0) << 4, parity, FALSE);
}
if(!tracing) {
DbpString("Trace full");
}
}
- memset(receivedCmd, 0x44, RECV_CMD_SIZE);
+ memset(receivedCmd, 0x44, MAX_FRAME_SIZE);
}
//Dbprintf("%x", cmdsRecvd);
void ReaderTransmitIClass(uint8_t* frame, int len)
{
- int wait = 0;
- int samples = 0;
- int par = 0;
-
- // This is tied to other size changes
- // uint8_t* frame_addr = ((uint8_t*)BigBuf) + 2024;
- CodeIClassCommand(frame,len);
-
- // Select the card
- TransmitIClassCommand(ToSend, ToSendMax, &samples, &wait);
- if(trigger)
- LED_A_ON();
-
- // Store reader command in buffer
- if (tracing) LogTrace(frame,len,rsamples,par,TRUE);
+ int wait = 0;
+ int samples = 0;
+
+ // This is tied to other size changes
+ // uint8_t* frame_addr = ((uint8_t*)BigBuf) + 2024;
+ CodeIClassCommand(frame,len);
+
+ // Select the card
+ TransmitIClassCommand(ToSend, ToSendMax, &samples, &wait);
+ if(trigger)
+ LED_A_ON();
+
+ // Store reader command in buffer
+ if (tracing) {
+ uint8_t par[MAX_PARITY_SIZE];
+ GetParity(frame, len, par);
+ LogTrace(frame, len, rsamples, rsamples, par, TRUE);
+ }
}
//-----------------------------------------------------------------------------
int samples = 0;
if (!GetIClassAnswer(receivedAnswer,160,&samples,0)) return FALSE;
rsamples += samples;
- if (tracing) LogTrace(receivedAnswer,Demod.len,rsamples,Demod.parityBits,FALSE);
+ if (tracing) {
+ uint8_t parity[MAX_PARITY_SIZE];
+ GetParity(receivedAnswer, Demod.len, parity);
+ LogTrace(receivedAnswer,Demod.len,rsamples,rsamples,parity,FALSE);
+ }
if(samples == 0) return FALSE;
return Demod.len;
}
uint8_t card_data[24]={0};
uint8_t last_csn[8]={0};
- uint8_t* resp = (((uint8_t *)BigBuf) + 3560); // was 3560 - tied to other size changes
-
+ uint8_t *resp = (((uint8_t *)BigBuf) + RECV_RESP_OFFSET);
+
int read_status= 0;
bool abort_after_read = arg0 & FLAG_ICLASS_READER_ONLY_ONCE;
int keyaccess;
} memory;
- uint8_t* resp = (((uint8_t *)BigBuf) + 3560); // was 3560 - tied to other size changes
-
+ uint8_t* resp = (((uint8_t *)BigBuf) + RECV_RESP_OFFSET);
+
setupIclassReader();
uint16_t crc = 0;
- uint8_t* resp = (((uint8_t *)BigBuf) + 3560); // was 3560 - tied to other size changes
+ uint8_t* resp = (((uint8_t *)BigBuf) + 3560);
// Reset trace buffer
memset(trace, 0x44, RECV_CMD_OFFSET);
//variables used for timing purposes:
//these are in ssp_clk cycles:
-uint32_t NextTransferTime;
-uint32_t LastTimeProxToAirStart;
-uint32_t LastProxToAirDuration;
+static uint32_t NextTransferTime;
+static uint32_t LastTimeProxToAirStart;
+static uint32_t LastProxToAirDuration;
return OddByteParity[bt];
}
-uint32_t GetParity(const uint8_t * pbtCmd, int iLen)
+void GetParity(const uint8_t *pbtCmd, uint16_t iLen, uint8_t *par)
{
- int i;
- uint32_t dwPar = 0;
-
- // Generate the parity bits
- for (i = 0; i < iLen; i++) {
- // and save them to a 32Bit word
- dwPar |= ((OddByteParity[pbtCmd[i]]) << i);
+ uint16_t paritybit_cnt = 0;
+ uint16_t paritybyte_cnt = 0;
+ uint8_t parityBits = 0;
+
+ for (uint16_t i = 0; i < iLen; i++) {
+ // Generate the parity bits
+ parityBits |= ((OddByteParity[pbtCmd[i]]) << (7-paritybit_cnt));
+ if (paritybit_cnt == 7) {
+ par[paritybyte_cnt] = parityBits; // save 8 Bits parity
+ parityBits = 0; // and advance to next Parity Byte
+ paritybyte_cnt++;
+ paritybit_cnt = 0;
+ } else {
+ paritybit_cnt++;
+ }
}
- return dwPar;
+
+ // save remaining parity bits
+ par[paritybyte_cnt] = parityBits;
+
}
void AppendCrc14443a(uint8_t* data, int len)
}
// The function LogTrace() is also used by the iClass implementation in iClass.c
-bool RAMFUNC LogTrace(const uint8_t * btBytes, uint8_t iLen, uint32_t timestamp, uint32_t dwParity, bool readerToTag)
+bool RAMFUNC LogTrace(const uint8_t *btBytes, uint16_t iLen, uint32_t timestamp_start, uint32_t timestamp_end, uint8_t *parity, bool readerToTag)
{
if (!tracing) return FALSE;
+
+ uint16_t num_paritybytes = (iLen-1)/8 + 1; // number of valid paritybytes in *parity
+ uint16_t duration = timestamp_end - timestamp_start;
+
// Return when trace is full
- if (traceLen + sizeof(timestamp) + sizeof(dwParity) + iLen >= TRACE_SIZE) {
+ if (traceLen + sizeof(iLen) + sizeof(timestamp_start) + sizeof(duration) + num_paritybytes + iLen >= TRACE_SIZE) {
tracing = FALSE; // don't trace any more
return FALSE;
}
- // Trace the random, i'm curious
- trace[traceLen++] = ((timestamp >> 0) & 0xff);
- trace[traceLen++] = ((timestamp >> 8) & 0xff);
- trace[traceLen++] = ((timestamp >> 16) & 0xff);
- trace[traceLen++] = ((timestamp >> 24) & 0xff);
+ // Traceformat:
+ // 32 bits timestamp (little endian)
+ // 16 bits duration (little endian)
+ // 16 bits data length (little endian, Highest Bit used as readerToTag flag)
+ // y Bytes data
+ // x Bytes parity (one byte per 8 bytes data)
+
+ // timestamp (start)
+ trace[traceLen++] = ((timestamp_start >> 0) & 0xff);
+ trace[traceLen++] = ((timestamp_start >> 8) & 0xff);
+ trace[traceLen++] = ((timestamp_start >> 16) & 0xff);
+ trace[traceLen++] = ((timestamp_start >> 24) & 0xff);
+
+ // duration
+ trace[traceLen++] = ((duration >> 0) & 0xff);
+ trace[traceLen++] = ((duration >> 8) & 0xff);
+
+ // data length
+ trace[traceLen++] = ((iLen >> 0) & 0xff);
+ trace[traceLen++] = ((iLen >> 8) & 0xff);
+ // readerToTag flag
if (!readerToTag) {
trace[traceLen - 1] |= 0x80;
}
- trace[traceLen++] = ((dwParity >> 0) & 0xff);
- trace[traceLen++] = ((dwParity >> 8) & 0xff);
- trace[traceLen++] = ((dwParity >> 16) & 0xff);
- trace[traceLen++] = ((dwParity >> 24) & 0xff);
- trace[traceLen++] = iLen;
+
+ // data bytes
if (btBytes != NULL && iLen != 0) {
memcpy(trace + traceLen, btBytes, iLen);
}
traceLen += iLen;
+
+ // parity bytes
+ if (parity != NULL && iLen != 0) {
+ memcpy(trace + traceLen, parity, num_paritybytes);
+ }
+ traceLen += num_paritybytes;
+
return TRUE;
}
Uart.state = STATE_UNSYNCD;
Uart.bitCount = 0;
Uart.len = 0; // number of decoded data bytes
+ Uart.parityLen = 0; // number of decoded parity bytes
Uart.shiftReg = 0; // shiftreg to hold decoded data bits
- Uart.parityBits = 0; //
+ Uart.parityBits = 0; // holds 8 parity bits
Uart.twoBits = 0x0000; // buffer for 2 Bits
Uart.highCnt = 0;
Uart.startTime = 0;
Uart.endTime = 0;
}
+void UartInit(uint8_t *data, uint8_t *parity)
+{
+ Uart.output = data;
+ Uart.parity = parity;
+ UartReset();
+}
// use parameter non_real_time to provide a timestamp. Set to 0 if the decoder should measure real time
static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit
Uart.bitCount = 0;
Uart.shiftReg = 0;
+ if((Uart.len&0x0007) == 0) { // every 8 data bytes
+ Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits
+ Uart.parityBits = 0;
+ }
}
}
}
Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit
Uart.bitCount = 0;
Uart.shiftReg = 0;
+ if ((Uart.len&0x0007) == 0) { // every 8 data bytes
+ Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits
+ Uart.parityBits = 0;
+ }
}
} else { // no modulation in both halves - Sequence Y
if (Uart.state == STATE_MILLER_Z || Uart.state == STATE_MILLER_Y) { // Y after logic "0" - End of Communication
Uart.state = STATE_UNSYNCD;
- if(Uart.len == 0 && Uart.bitCount > 0) { // if we decoded some bits
- Uart.shiftReg >>= (9 - Uart.bitCount); // add them to the output
- Uart.output[Uart.len++] = (Uart.shiftReg & 0xff);
- Uart.parityBits <<= 1; // no parity bit - add "0"
- Uart.bitCount--; // last "0" was part of the EOC sequence
+ Uart.bitCount--; // last "0" was part of EOC sequence
+ Uart.shiftReg <<= 1; // drop it
+ if(Uart.bitCount > 0) { // if we decoded some bits
+ Uart.shiftReg >>= (9 - Uart.bitCount); // right align them
+ Uart.output[Uart.len++] = (Uart.shiftReg & 0xff); // add last byte to the output
+ Uart.parityBits <<= 1; // add a (void) parity bit
+ Uart.parityBits <<= (8 - (Uart.len&0x0007)); // left align parity bits
+ Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store it
+ return TRUE;
+ } else if (Uart.len & 0x0007) { // there are some parity bits to store
+ Uart.parityBits <<= (8 - (Uart.len&0x0007)); // left align remaining parity bits
+ Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store them
+ return TRUE; // we are finished with decoding the raw data sequence
}
- return TRUE;
}
if (Uart.state == STATE_START_OF_COMMUNICATION) { // error - must not follow directly after SOC
UartReset();
Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit
Uart.bitCount = 0;
Uart.shiftReg = 0;
+ if ((Uart.len&0x0007) == 0) { // every 8 data bytes
+ Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits
+ Uart.parityBits = 0;
+ }
}
}
}
{
Demod.state = DEMOD_UNSYNCD;
Demod.len = 0; // number of decoded data bytes
+ Demod.parityLen = 0;
Demod.shiftReg = 0; // shiftreg to hold decoded data bits
Demod.parityBits = 0; //
Demod.collisionPos = 0; // Position of collision bit
Demod.endTime = 0;
}
+
+void DemodInit(uint8_t *data, uint8_t *parity)
+{
+ Demod.output = data;
+ Demod.parity = parity;
+ DemodReset();
+}
+
// use parameter non_real_time to provide a timestamp. Set to 0 if the decoder should measure real time
static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non_real_time)
{
Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
Demod.bitCount = 0;
Demod.shiftReg = 0;
+ if((Demod.len&0x0007) == 0) { // every 8 data bytes
+ Demod.parity[Demod.parityLen++] = Demod.parityBits; // store 8 parity bits
+ Demod.parityBits = 0;
+ }
}
Demod.endTime = Demod.startTime + 8*(9*Demod.len + Demod.bitCount + 1) - 4;
} else { // no modulation in first half
Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
Demod.bitCount = 0;
Demod.shiftReg = 0;
+ if ((Demod.len&0x0007) == 0) { // every 8 data bytes
+ Demod.parity[Demod.parityLen++] = Demod.parityBits; // store 8 parity bits1
+ Demod.parityBits = 0;
+ }
}
Demod.endTime = Demod.startTime + 8*(9*Demod.len + Demod.bitCount + 1);
} else { // no modulation in both halves - End of communication
- if (Demod.len > 0 || Demod.bitCount > 0) { // received something
- if(Demod.bitCount > 0) { // if we decoded bits
- Demod.shiftReg >>= (9 - Demod.bitCount); // add the remaining decoded bits to the output
- Demod.output[Demod.len++] = Demod.shiftReg & 0xff;
- // No parity bit, so just shift a 0
- Demod.parityBits <<= 1;
- }
+ if(Demod.bitCount > 0) { // there are some remaining data bits
+ Demod.shiftReg >>= (9 - Demod.bitCount); // right align the decoded bits
+ Demod.output[Demod.len++] = Demod.shiftReg & 0xff; // and add them to the output
+ Demod.parityBits <<= 1; // add a (void) parity bit
+ Demod.parityBits <<= (8 - (Demod.len&0x0007)); // left align remaining parity bits
+ Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
+ return TRUE;
+ } else if (Demod.len & 0x0007) { // there are some parity bits to store
+ Demod.parityBits <<= (8 - (Demod.len&0x0007)); // left align remaining parity bits
+ Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
return TRUE; // we are finished with decoding the raw data sequence
} else { // nothing received. Start over
DemodReset();
// The command (reader -> tag) that we're receiving.
// The length of a received command will in most cases be no more than 18 bytes.
// So 32 should be enough!
- uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET);
+ uint8_t *receivedCmd = ((uint8_t *)BigBuf) + RECV_CMD_OFFSET;
+ uint8_t *receivedCmdPar = ((uint8_t *)BigBuf) + RECV_CMD_PAR_OFFSET;
+
// The response (tag -> reader) that we're receiving.
- uint8_t *receivedResponse = (((uint8_t *)BigBuf) + RECV_RES_OFFSET);
-
+ uint8_t *receivedResponse = ((uint8_t *)BigBuf) + RECV_RESP_OFFSET;
+ uint8_t *receivedResponsePar = ((uint8_t *)BigBuf) + RECV_RESP_PAR_OFFSET;
+
// As we receive stuff, we copy it from receivedCmd or receivedResponse
// into trace, along with its length and other annotations.
//uint8_t *trace = (uint8_t *)BigBuf;
iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
// Set up the demodulator for tag -> reader responses.
- Demod.output = receivedResponse;
-
+ DemodInit(receivedResponse, receivedResponsePar);
+
// Set up the demodulator for the reader -> tag commands
- Uart.output = receivedCmd;
-
+ UartInit(receivedCmd, receivedCmdPar);
+
// Setup and start DMA.
FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE);
if ((!triggered) && (param & 0x02) && (Uart.len == 1) && (Uart.bitCount == 7)) triggered = TRUE;
if(triggered) {
- if (!LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, Uart.parityBits, TRUE)) break;
- if (!LogTrace(NULL, 0, Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, 0, TRUE)) break;
+ if (!LogTrace(receivedCmd,
+ Uart.len,
+ Uart.startTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER,
+ Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER,
+ Uart.parity,
+ TRUE)) break;
}
/* And ready to receive another command. */
UartReset();
if(ManchesterDecoding(tagdata, 0, (rsamples-1)*4)) {
LED_B_ON();
- if (!LogTrace(receivedResponse, Demod.len, Demod.startTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER, Demod.parityBits, FALSE)) break;
- if (!LogTrace(NULL, 0, Demod.endTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER, 0, FALSE)) break;
+ if (!LogTrace(receivedResponse,
+ Demod.len,
+ Demod.startTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER,
+ Demod.endTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER,
+ Demod.parity,
+ FALSE)) break;
if ((!triggered) && (param & 0x01)) triggered = TRUE;
//-----------------------------------------------------------------------------
// Prepare tag messages
//-----------------------------------------------------------------------------
-static void CodeIso14443aAsTagPar(const uint8_t *cmd, int len, uint32_t dwParity)
+static void CodeIso14443aAsTagPar(const uint8_t *cmd, uint16_t len, uint8_t *parity)
{
- int i;
-
ToSendReset();
// Correction bit, might be removed when not needed
// Send startbit
ToSend[++ToSendMax] = SEC_D;
+
LastProxToAirDuration = 8 * ToSendMax - 4;
- for(i = 0; i < len; i++) {
- int j;
+ for(uint16_t i = 0; i < len; i++) {
uint8_t b = cmd[i];
// Data bits
- for(j = 0; j < 8; j++) {
+ for(uint16_t j = 0; j < 8; j++) {
if(b & 1) {
ToSend[++ToSendMax] = SEC_D;
} else {
}
// Get the parity bit
- if ((dwParity >> i) & 0x01) {
+ if (parity[i>>3] & (0x80>>(i&0x0007))) {
ToSend[++ToSendMax] = SEC_D;
LastProxToAirDuration = 8 * ToSendMax - 4;
} else {
ToSendMax++;
}
-static void CodeIso14443aAsTag(const uint8_t *cmd, int len){
- CodeIso14443aAsTagPar(cmd, len, GetParity(cmd, len));
+static void CodeIso14443aAsTag(const uint8_t *cmd, uint16_t len)
+{
+ uint8_t par[MAX_PARITY_SIZE];
+
+ GetParity(cmd, len, par);
+ CodeIso14443aAsTagPar(cmd, len, par);
}
// Stop when button is pressed
// Or return TRUE when command is captured
//-----------------------------------------------------------------------------
-static int GetIso14443aCommandFromReader(uint8_t *received, int *len, int maxLen)
+static int GetIso14443aCommandFromReader(uint8_t *received, uint8_t *parity, int *len)
{
// Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen
// only, since we are receiving, not transmitting).
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN);
// Now run a `software UART' on the stream of incoming samples.
- UartReset();
- Uart.output = received;
+ UartInit(received, parity);
// clear RXRDY:
uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
}
}
-static int EmSendCmd14443aRaw(uint8_t *resp, int respLen, bool correctionNeeded);
+static int EmSendCmd14443aRaw(uint8_t *resp, uint16_t respLen, bool correctionNeeded);
int EmSend4bitEx(uint8_t resp, bool correctionNeeded);
int EmSend4bit(uint8_t resp);
-int EmSendCmdExPar(uint8_t *resp, int respLen, bool correctionNeeded, uint32_t par);
-int EmSendCmdExPar(uint8_t *resp, int respLen, bool correctionNeeded, uint32_t par);
-int EmSendCmdEx(uint8_t *resp, int respLen, bool correctionNeeded);
-int EmSendCmd(uint8_t *resp, int respLen);
-int EmSendCmdPar(uint8_t *resp, int respLen, uint32_t par);
-bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_StartTime, uint32_t reader_EndTime, uint32_t reader_Parity,
- uint8_t *tag_data, uint16_t tag_len, uint32_t tag_StartTime, uint32_t tag_EndTime, uint32_t tag_Parity);
+int EmSendCmdExPar(uint8_t *resp, uint16_t respLen, bool correctionNeeded, uint8_t *par);
+int EmSendCmdEx(uint8_t *resp, uint16_t respLen, bool correctionNeeded);
+int EmSendCmd(uint8_t *resp, uint16_t respLen);
+int EmSendCmdPar(uint8_t *resp, uint16_t respLen, uint8_t *par);
+bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_StartTime, uint32_t reader_EndTime, uint8_t *reader_Parity,
+ uint8_t *tag_data, uint16_t tag_len, uint32_t tag_StartTime, uint32_t tag_EndTime, uint8_t *tag_Parity);
static uint8_t* free_buffer_pointer = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET);
response_info->modulation = free_buffer_pointer;
// Determine the maximum size we can use from our buffer
- size_t max_buffer_size = (((uint8_t *)BigBuf)+FREE_BUFFER_OFFSET+FREE_BUFFER_SIZE)-free_buffer_pointer;
+ size_t max_buffer_size = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET + FREE_BUFFER_SIZE) - free_buffer_pointer;
// Forward the prepare tag modulation function to the inner function
if (prepare_tag_modulation(response_info,max_buffer_size)) {
ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]);
uint8_t response5[] = { 0x00, 0x00, 0x00, 0x00 }; // Very random tag nonce
- uint8_t response6[] = { 0x04, 0x58, 0x00, 0x02, 0x00, 0x00 }; // dummy ATS (pseudo-ATR), answer to RATS
+ uint8_t response6[] = { 0x04, 0x58, 0x80, 0x02, 0x00, 0x00 }; // dummy ATS (pseudo-ATR), answer to RATS:
+ // Format byte = 0x58: FSCI=0x08 (FSC=256), TA(1) and TC(1) present,
+ // TA(1) = 0x80: different divisors not supported, DR = 1, DS = 1
+ // TB(1) = not present. Defaults: FWI = 4 (FWT = 256 * 16 * 2^4 * 1/fc = 4833us), SFGI = 0 (SFG = 256 * 16 * 2^0 * 1/fc = 302us)
+ // TC(1) = 0x02: CID supported, NAD not supported
ComputeCrc14443(CRC_14443_A, response6, 4, &response6[4], &response6[5]);
#define TAG_RESPONSE_COUNT 7
prepare_allocated_tag_modulation(&responses[i]);
}
- uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET);
int len = 0;
// To control where we are in the protocol
// We need to listen to the high-frequency, peak-detected path.
iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
+ // buffers used on software Uart:
+ uint8_t *receivedCmd = ((uint8_t *)BigBuf) + RECV_CMD_OFFSET;
+ uint8_t *receivedCmdPar = ((uint8_t *)BigBuf) + RECV_CMD_PAR_OFFSET;
+
cmdsRecvd = 0;
tag_response_info_t* p_response;
for(;;) {
// Clean receive command buffer
- if(!GetIso14443aCommandFromReader(receivedCmd, &len, RECV_CMD_SIZE)) {
+ if(!GetIso14443aCommandFromReader(receivedCmd, receivedCmdPar, &len)) {
DbpString("Button press");
break;
}
p_response = NULL;
- // doob - added loads of debug strings so we can see what the reader is saying to us during the sim as hi14alist is not populated
// Okay, look at the command now.
lastorder = order;
if(receivedCmd[0] == 0x26) { // Received a REQUEST
p_response = &responses[0]; order = 6;
} else if(receivedCmd[1] == 0x20 && receivedCmd[0] == 0x93) { // Received request for UID (cascade 1)
p_response = &responses[1]; order = 2;
- } else if(receivedCmd[1] == 0x20 && receivedCmd[0] == 0x95) { // Received request for UID (cascade 2)
+ } else if(receivedCmd[1] == 0x20 && receivedCmd[0] == 0x95) { // Received request for UID (cascade 2)
p_response = &responses[2]; order = 20;
} else if(receivedCmd[1] == 0x70 && receivedCmd[0] == 0x93) { // Received a SELECT (cascade 1)
p_response = &responses[3]; order = 3;
} else if(receivedCmd[1] == 0x70 && receivedCmd[0] == 0x95) { // Received a SELECT (cascade 2)
p_response = &responses[4]; order = 30;
} else if(receivedCmd[0] == 0x30) { // Received a (plain) READ
- EmSendCmdEx(data+(4*receivedCmd[0]),16,false);
+ EmSendCmdEx(data+(4*receivedCmd[1]),16,false);
// Dbprintf("Read request from reader: %x %x",receivedCmd[0],receivedCmd[1]);
// We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below
p_response = NULL;
} else if(receivedCmd[0] == 0x50) { // Received a HALT
// DbpString("Reader requested we HALT!:");
if (tracing) {
- LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
}
p_response = NULL;
} else if(receivedCmd[0] == 0x60 || receivedCmd[0] == 0x61) { // Received an authentication request
} else {
p_response = &responses[6]; order = 70;
}
- } else if (order == 7 && len == 8) { // Received authentication request
+ } else if (order == 7 && len == 8) { // Received {nr] and {ar} (part of authentication)
if (tracing) {
- LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
}
uint32_t nr = bytes_to_num(receivedCmd,4);
uint32_t ar = bytes_to_num(receivedCmd+4,4);
default: {
// Never seen this command before
if (tracing) {
- LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
}
Dbprintf("Received unknown command (len=%d):",len);
Dbhexdump(len,receivedCmd,false);
if (prepare_tag_modulation(&dynamic_response_info,DYNAMIC_MODULATION_BUFFER_SIZE) == false) {
Dbprintf("Error preparing tag response");
if (tracing) {
- LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
}
break;
}
if (p_response != NULL) {
EmSendCmd14443aRaw(p_response->modulation, p_response->modulation_n, receivedCmd[0] == 0x52);
// do the tracing for the previous reader request and this tag answer:
+ uint8_t par[MAX_PARITY_SIZE];
+ GetParity(p_response->response, p_response->response_n, par);
EmLogTrace(Uart.output,
Uart.len,
Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG,
Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG,
- Uart.parityBits,
+ Uart.parity,
p_response->response,
p_response->response_n,
LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_TAG,
(LastTimeProxToAirStart + p_response->ProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG,
- SwapBits(GetParity(p_response->response, p_response->response_n), p_response->response_n));
+ par);
}
if (!tracing) {
// if == 0: transfer immediately and return time of transfer
// if != 0: delay transfer until time specified
//-------------------------------------------------------------------------------------
-static void TransmitFor14443a(const uint8_t *cmd, int len, uint32_t *timing)
+static void TransmitFor14443a(const uint8_t *cmd, uint16_t len, uint32_t *timing)
{
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
//-----------------------------------------------------------------------------
// Prepare reader command (in bits, support short frames) to send to FPGA
//-----------------------------------------------------------------------------
-void CodeIso14443aBitsAsReaderPar(const uint8_t * cmd, int bits, uint32_t dwParity)
+void CodeIso14443aBitsAsReaderPar(const uint8_t *cmd, uint16_t bits, const uint8_t *parity)
{
int i, j;
int last;
b >>= 1;
}
- // Only transmit (last) parity bit if we transmitted a complete byte
+ // Only transmit parity bit if we transmitted a complete byte
if (j == 8) {
// Get the parity bit
- if ((dwParity >> i) & 0x01) {
+ if (parity[i>>3] & (0x80 >> (i&0x0007))) {
// Sequence X
ToSend[++ToSendMax] = SEC_X;
LastProxToAirDuration = 8 * (ToSendMax+1) - 2;
//-----------------------------------------------------------------------------
// Prepare reader command to send to FPGA
//-----------------------------------------------------------------------------
-void CodeIso14443aAsReaderPar(const uint8_t * cmd, int len, uint32_t dwParity)
+void CodeIso14443aAsReaderPar(const uint8_t *cmd, uint16_t len, const uint8_t *parity)
{
- CodeIso14443aBitsAsReaderPar(cmd,len*8,dwParity);
+ CodeIso14443aBitsAsReaderPar(cmd, len*8, parity);
}
//-----------------------------------------------------------------------------
// Stop when button is pressed (return 1) or field was gone (return 2)
// Or return 0 when command is captured
//-----------------------------------------------------------------------------
-static int EmGetCmd(uint8_t *received, int *len)
+static int EmGetCmd(uint8_t *received, uint16_t *len, uint8_t *parity)
{
*len = 0;
AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
// Now run a 'software UART' on the stream of incoming samples.
- UartReset();
- Uart.output = received;
+ UartInit(received, parity);
// Clear RXRDY:
uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
}
-static int EmSendCmd14443aRaw(uint8_t *resp, int respLen, bool correctionNeeded)
+static int EmSendCmd14443aRaw(uint8_t *resp, uint16_t respLen, bool correctionNeeded)
{
uint8_t b;
uint16_t i = 0;
Code4bitAnswerAsTag(resp);
int res = EmSendCmd14443aRaw(ToSend, ToSendMax, correctionNeeded);
// do the tracing for the previous reader request and this tag answer:
+ uint8_t par[1];
+ GetParity(&resp, 1, par);
EmLogTrace(Uart.output,
Uart.len,
Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG,
Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG,
- Uart.parityBits,
+ Uart.parity,
&resp,
1,
LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_TAG,
(LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG,
- SwapBits(GetParity(&resp, 1), 1));
+ par);
return res;
}
return EmSend4bitEx(resp, false);
}
-int EmSendCmdExPar(uint8_t *resp, int respLen, bool correctionNeeded, uint32_t par){
+int EmSendCmdExPar(uint8_t *resp, uint16_t respLen, bool correctionNeeded, uint8_t *par){
CodeIso14443aAsTagPar(resp, respLen, par);
int res = EmSendCmd14443aRaw(ToSend, ToSendMax, correctionNeeded);
// do the tracing for the previous reader request and this tag answer:
Uart.len,
Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG,
Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG,
- Uart.parityBits,
+ Uart.parity,
resp,
respLen,
LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_TAG,
(LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG,
- SwapBits(GetParity(resp, respLen), respLen));
+ par);
return res;
}
-int EmSendCmdEx(uint8_t *resp, int respLen, bool correctionNeeded){
- return EmSendCmdExPar(resp, respLen, correctionNeeded, GetParity(resp, respLen));
+int EmSendCmdEx(uint8_t *resp, uint16_t respLen, bool correctionNeeded){
+ uint8_t par[MAX_PARITY_SIZE];
+ GetParity(resp, respLen, par);
+ return EmSendCmdExPar(resp, respLen, correctionNeeded, par);
}
-int EmSendCmd(uint8_t *resp, int respLen){
- return EmSendCmdExPar(resp, respLen, false, GetParity(resp, respLen));
+int EmSendCmd(uint8_t *resp, uint16_t respLen){
+ uint8_t par[MAX_PARITY_SIZE];
+ GetParity(resp, respLen, par);
+ return EmSendCmdExPar(resp, respLen, false, par);
}
-int EmSendCmdPar(uint8_t *resp, int respLen, uint32_t par){
+int EmSendCmdPar(uint8_t *resp, uint16_t respLen, uint8_t *par){
return EmSendCmdExPar(resp, respLen, false, par);
}
-bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_StartTime, uint32_t reader_EndTime, uint32_t reader_Parity,
- uint8_t *tag_data, uint16_t tag_len, uint32_t tag_StartTime, uint32_t tag_EndTime, uint32_t tag_Parity)
+bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_StartTime, uint32_t reader_EndTime, uint8_t *reader_Parity,
+ uint8_t *tag_data, uint16_t tag_len, uint32_t tag_StartTime, uint32_t tag_EndTime, uint8_t *tag_Parity)
{
if (tracing) {
// we cannot exactly measure the end and start of a received command from reader. However we know that the delay from
uint16_t exact_fdt = (approx_fdt - 20 + 32)/64 * 64 + 20;
reader_EndTime = tag_StartTime - exact_fdt;
reader_StartTime = reader_EndTime - reader_modlen;
- if (!LogTrace(reader_data, reader_len, reader_StartTime, reader_Parity, TRUE)) {
- return FALSE;
- } else if (!LogTrace(NULL, 0, reader_EndTime, 0, TRUE)) {
+ if (!LogTrace(reader_data, reader_len, reader_StartTime, reader_EndTime, reader_Parity, TRUE)) {
return FALSE;
- } else if (!LogTrace(tag_data, tag_len, tag_StartTime, tag_Parity, FALSE)) {
- return FALSE;
- } else {
- return (!LogTrace(NULL, 0, tag_EndTime, 0, FALSE));
- }
+ } else return(!LogTrace(tag_data, tag_len, tag_StartTime, tag_EndTime, tag_Parity, FALSE));
} else {
return TRUE;
}
// If a response is captured return TRUE
// If it takes too long return FALSE
//-----------------------------------------------------------------------------
-static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint16_t offset, int maxLen)
+static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint8_t *receivedResponsePar, uint16_t offset)
{
uint16_t c;
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_LISTEN);
// Now get the answer from the card
- DemodReset();
- Demod.output = receivedResponse;
+ DemodInit(receivedResponse, receivedResponsePar);
// clear RXRDY:
uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
if(ManchesterDecoding(b, offset, 0)) {
NextTransferTime = MAX(NextTransferTime, Demod.endTime - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/16 + FRAME_DELAY_TIME_PICC_TO_PCD);
return TRUE;
- } else if(c++ > iso14a_timeout) {
+ } else if (c++ > iso14a_timeout) {
return FALSE;
}
}
}
}
-void ReaderTransmitBitsPar(uint8_t* frame, int bits, uint32_t par, uint32_t *timing)
+void ReaderTransmitBitsPar(uint8_t* frame, uint16_t bits, uint8_t *par, uint32_t *timing)
{
- CodeIso14443aBitsAsReaderPar(frame,bits,par);
+ CodeIso14443aBitsAsReaderPar(frame, bits, par);
// Send command to tag
TransmitFor14443a(ToSend, ToSendMax, timing);
// Log reader command in trace buffer
if (tracing) {
- LogTrace(frame, nbytes(bits), LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_READER, par, TRUE);
- LogTrace(NULL, 0, (LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_READER, 0, TRUE);
+ LogTrace(frame, nbytes(bits), LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_READER, (LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_READER, par, TRUE);
}
}
-void ReaderTransmitPar(uint8_t* frame, int len, uint32_t par, uint32_t *timing)
+void ReaderTransmitPar(uint8_t* frame, uint16_t len, uint8_t *par, uint32_t *timing)
{
- ReaderTransmitBitsPar(frame,len*8,par, timing);
+ ReaderTransmitBitsPar(frame, len*8, par, timing);
}
-void ReaderTransmitBits(uint8_t* frame, int len, uint32_t *timing)
+void ReaderTransmitBits(uint8_t* frame, uint16_t len, uint32_t *timing)
{
// Generate parity and redirect
- ReaderTransmitBitsPar(frame,len,GetParity(frame,len/8), timing);
+ uint8_t par[MAX_PARITY_SIZE];
+ GetParity(frame, len/8, par);
+ ReaderTransmitBitsPar(frame, len, par, timing);
}
-void ReaderTransmit(uint8_t* frame, int len, uint32_t *timing)
+void ReaderTransmit(uint8_t* frame, uint16_t len, uint32_t *timing)
{
// Generate parity and redirect
- ReaderTransmitBitsPar(frame,len*8,GetParity(frame,len), timing);
+ uint8_t par[MAX_PARITY_SIZE];
+ GetParity(frame, len, par);
+ ReaderTransmitBitsPar(frame, len*8, par, timing);
}
-int ReaderReceiveOffset(uint8_t* receivedAnswer, uint16_t offset)
+int ReaderReceiveOffset(uint8_t* receivedAnswer, uint16_t offset, uint8_t *parity)
{
- if (!GetIso14443aAnswerFromTag(receivedAnswer,offset,160)) return FALSE;
+ if (!GetIso14443aAnswerFromTag(receivedAnswer, parity, offset)) return FALSE;
if (tracing) {
- LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.parityBits, FALSE);
- LogTrace(NULL, 0, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, 0, FALSE);
+ LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, FALSE);
}
return Demod.len;
}
-int ReaderReceive(uint8_t* receivedAnswer)
+int ReaderReceive(uint8_t *receivedAnswer, uint8_t *parity)
{
- return ReaderReceiveOffset(receivedAnswer, 0);
-}
-
-int ReaderReceivePar(uint8_t *receivedAnswer, uint32_t *parptr)
-{
- if (!GetIso14443aAnswerFromTag(receivedAnswer,0,160)) return FALSE;
+ if (!GetIso14443aAnswerFromTag(receivedAnswer, parity, 0)) return FALSE;
if (tracing) {
- LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.parityBits, FALSE);
- LogTrace(NULL, 0, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, 0, FALSE);
+ LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, FALSE);
}
- *parptr = Demod.parityBits;
return Demod.len;
}
/* performs iso14443a anticollision procedure
* fills the uid pointer unless NULL
* fills resp_data unless NULL */
-int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, uint32_t* cuid_ptr) {
- uint8_t wupa[] = { 0x52 }; // 0x26 - REQA 0x52 - WAKE-UP
- uint8_t sel_all[] = { 0x93,0x20 };
- uint8_t sel_uid[] = { 0x93,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
- uint8_t rats[] = { 0xE0,0x80,0x00,0x00 }; // FSD=256, FSDI=8, CID=0
- uint8_t* resp = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET); // was 3560 - tied to other size changes
- byte_t uid_resp[4];
- size_t uid_resp_len;
-
- uint8_t sak = 0x04; // cascade uid
- int cascade_level = 0;
- int len;
-
- // Broadcast for a card, WUPA (0x52) will force response from all cards in the field
+int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, uint32_t *cuid_ptr) {
+ uint8_t wupa[] = { 0x52 }; // 0x26 - REQA 0x52 - WAKE-UP
+ uint8_t sel_all[] = { 0x93,0x20 };
+ uint8_t sel_uid[] = { 0x93,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t rats[] = { 0xE0,0x80,0x00,0x00 }; // FSD=256, FSDI=8, CID=0
+ uint8_t *resp = ((uint8_t *)BigBuf) + RECV_RESP_OFFSET;
+ uint8_t *resp_par = ((uint8_t *)BigBuf) + RECV_RESP_PAR_OFFSET;
+ byte_t uid_resp[4];
+ size_t uid_resp_len;
+
+ uint8_t sak = 0x04; // cascade uid
+ int cascade_level = 0;
+ int len;
+
+ // Broadcast for a card, WUPA (0x52) will force response from all cards in the field
ReaderTransmitBitsPar(wupa,7,0, NULL);
- // Receive the ATQA
- if(!ReaderReceive(resp)) return 0;
- // Dbprintf("atqa: %02x %02x",resp[0],resp[1]);
-
- if(p_hi14a_card) {
- memcpy(p_hi14a_card->atqa, resp, 2);
- p_hi14a_card->uidlen = 0;
- memset(p_hi14a_card->uid,0,10);
- }
+ // Receive the ATQA
+ if(!ReaderReceive(resp, resp_par)) return 0;
+ //Dbprintf("atqa: %02x %02x",resp[1],resp[0]);
+
+ if(p_hi14a_card) {
+ memcpy(p_hi14a_card->atqa, resp, 2);
+ p_hi14a_card->uidlen = 0;
+ memset(p_hi14a_card->uid,0,10);
+ }
- // clear uid
- if (uid_ptr) {
- memset(uid_ptr,0,10);
- }
+ // clear uid
+ if (uid_ptr) {
+ memset(uid_ptr,0,10);
+ }
- // OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
- // which case we need to make a cascade 2 request and select - this is a long UID
- // While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
- for(; sak & 0x04; cascade_level++) {
- // SELECT_* (L1: 0x93, L2: 0x95, L3: 0x97)
- sel_uid[0] = sel_all[0] = 0x93 + cascade_level * 2;
-
- // SELECT_ALL
- ReaderTransmit(sel_all,sizeof(sel_all), NULL);
- if (!ReaderReceive(resp)) return 0;
-
- if (Demod.collisionPos) { // we had a collision and need to construct the UID bit by bit
- memset(uid_resp, 0, 4);
- uint16_t uid_resp_bits = 0;
- uint16_t collision_answer_offset = 0;
- // anti-collision-loop:
- while (Demod.collisionPos) {
- Dbprintf("Multiple tags detected. Collision after Bit %d", Demod.collisionPos);
- for (uint16_t i = collision_answer_offset; i < Demod.collisionPos; i++, uid_resp_bits++) { // add valid UID bits before collision point
- uint16_t UIDbit = (resp[i/8] >> (i % 8)) & 0x01;
- uid_resp[uid_resp_bits & 0xf8] |= UIDbit << (uid_resp_bits % 8);
+ // OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
+ // which case we need to make a cascade 2 request and select - this is a long UID
+ // While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
+ for(; sak & 0x04; cascade_level++) {
+ // SELECT_* (L1: 0x93, L2: 0x95, L3: 0x97)
+ sel_uid[0] = sel_all[0] = 0x93 + cascade_level * 2;
+
+ // SELECT_ALL
+ ReaderTransmit(sel_all, sizeof(sel_all), NULL);
+ if (!ReaderReceive(resp, resp_par)) return 0;
+
+ if (Demod.collisionPos) { // we had a collision and need to construct the UID bit by bit
+ memset(uid_resp, 0, 4);
+ uint16_t uid_resp_bits = 0;
+ uint16_t collision_answer_offset = 0;
+ // anti-collision-loop:
+ while (Demod.collisionPos) {
+ Dbprintf("Multiple tags detected. Collision after Bit %d", Demod.collisionPos);
+ for (uint16_t i = collision_answer_offset; i < Demod.collisionPos; i++, uid_resp_bits++) { // add valid UID bits before collision point
+ uint16_t UIDbit = (resp[i/8] >> (i % 8)) & 0x01;
+ uid_resp[uid_resp_bits & 0xf8] |= UIDbit << (uid_resp_bits % 8);
+ }
+ uid_resp[uid_resp_bits/8] |= 1 << (uid_resp_bits % 8); // next time select the card(s) with a 1 in the collision position
+ uid_resp_bits++;
+ // construct anticollosion command:
+ sel_uid[1] = ((2 + uid_resp_bits/8) << 4) | (uid_resp_bits & 0x07); // length of data in bytes and bits
+ for (uint16_t i = 0; i <= uid_resp_bits/8; i++) {
+ sel_uid[2+i] = uid_resp[i];
+ }
+ collision_answer_offset = uid_resp_bits%8;
+ ReaderTransmitBits(sel_uid, 16 + uid_resp_bits, NULL);
+ if (!ReaderReceiveOffset(resp, collision_answer_offset, resp_par)) return 0;
}
- uid_resp[uid_resp_bits/8] |= 1 << (uid_resp_bits % 8); // next time select the card(s) with a 1 in the collision position
- uid_resp_bits++;
- // construct anticollosion command:
- sel_uid[1] = ((2 + uid_resp_bits/8) << 4) | (uid_resp_bits & 0x07); // length of data in bytes and bits
- for (uint16_t i = 0; i <= uid_resp_bits/8; i++) {
- sel_uid[2+i] = uid_resp[i];
+ // finally, add the last bits and BCC of the UID
+ for (uint16_t i = collision_answer_offset; i < (Demod.len-1)*8; i++, uid_resp_bits++) {
+ uint16_t UIDbit = (resp[i/8] >> (i%8)) & 0x01;
+ uid_resp[uid_resp_bits/8] |= UIDbit << (uid_resp_bits % 8);
}
- collision_answer_offset = uid_resp_bits%8;
- ReaderTransmitBits(sel_uid, 16 + uid_resp_bits, NULL);
- if (!ReaderReceiveOffset(resp, collision_answer_offset)) return 0;
- }
- // finally, add the last bits and BCC of the UID
- for (uint16_t i = collision_answer_offset; i < (Demod.len-1)*8; i++, uid_resp_bits++) {
- uint16_t UIDbit = (resp[i/8] >> (i%8)) & 0x01;
- uid_resp[uid_resp_bits/8] |= UIDbit << (uid_resp_bits % 8);
- }
- } else { // no collision, use the response to SELECT_ALL as current uid
- memcpy(uid_resp,resp,4);
- }
- uid_resp_len = 4;
- // Dbprintf("uid: %02x %02x %02x %02x",uid_resp[0],uid_resp[1],uid_resp[2],uid_resp[3]);
+ } else { // no collision, use the response to SELECT_ALL as current uid
+ memcpy(uid_resp, resp, 4);
+ }
+ uid_resp_len = 4;
+ //Dbprintf("uid: %02x %02x %02x %02x",uid_resp[0],uid_resp[1],uid_resp[2],uid_resp[3]);
- // calculate crypto UID. Always use last 4 Bytes.
- if(cuid_ptr) {
- *cuid_ptr = bytes_to_num(uid_resp, 4);
- }
+ // calculate crypto UID. Always use last 4 Bytes.
+ if(cuid_ptr) {
+ *cuid_ptr = bytes_to_num(uid_resp, 4);
+ }
- // Construct SELECT UID command
- sel_uid[1] = 0x70; // transmitting a full UID (1 Byte cmd, 1 Byte NVB, 4 Byte UID, 1 Byte BCC, 2 Bytes CRC)
- memcpy(sel_uid+2,uid_resp,4); // the UID
- sel_uid[6] = sel_uid[2] ^ sel_uid[3] ^ sel_uid[4] ^ sel_uid[5]; // calculate and add BCC
- AppendCrc14443a(sel_uid,7); // calculate and add CRC
- ReaderTransmit(sel_uid,sizeof(sel_uid), NULL);
-
- // Receive the SAK
- if (!ReaderReceive(resp)) return 0;
- sak = resp[0];
-
- // Test if more parts of the uid are comming
- if ((sak & 0x04) /* && uid_resp[0] == 0x88 */) {
- // Remove first byte, 0x88 is not an UID byte, it CT, see page 3 of:
- // http://www.nxp.com/documents/application_note/AN10927.pdf
- // This was earlier:
- //memcpy(uid_resp, uid_resp + 1, 3);
- // But memcpy should not be used for overlapping arrays,
- // and memmove appears to not be available in the arm build.
- // Therefore:
- uid_resp[0] = uid_resp[1];
- uid_resp[1] = uid_resp[2];
- uid_resp[2] = uid_resp[3];
-
- uid_resp_len = 3;
- }
+ // Construct SELECT UID command
+ sel_uid[1] = 0x70; // transmitting a full UID (1 Byte cmd, 1 Byte NVB, 4 Byte UID, 1 Byte BCC, 2 Bytes CRC)
+ memcpy(sel_uid+2, uid_resp, 4); // the UID
+ sel_uid[6] = sel_uid[2] ^ sel_uid[3] ^ sel_uid[4] ^ sel_uid[5]; // calculate and add BCC
+ AppendCrc14443a(sel_uid, 7); // calculate and add CRC
+ ReaderTransmit(sel_uid, sizeof(sel_uid), NULL);
+
+ // Receive the SAK
+ if (!ReaderReceive(resp, resp_par)) return 0;
+ sak = resp[0];
+
+ // Test if more parts of the uid are comming
+ if ((sak & 0x04) /* && uid_resp[0] == 0x88 */) {
+ // Remove first byte, 0x88 is not an UID byte, it CT, see page 3 of:
+ // http://www.nxp.com/documents/application_note/AN10927.pdf
+ // This was earlier:
+ //memcpy(uid_resp, uid_resp + 1, 3);
+ // But memcpy should not be used for overlapping arrays,
+ // and memmove appears to not be available in the arm build.
+ // Therefore:
+ uid_resp[0] = uid_resp[1];
+ uid_resp[1] = uid_resp[2];
+ uid_resp[2] = uid_resp[3];
+
+ uid_resp_len = 3;
+ }
- if(uid_ptr) {
- memcpy(uid_ptr + (cascade_level*3), uid_resp, uid_resp_len);
- }
+ if(uid_ptr) {
+ memcpy(uid_ptr + (cascade_level*3), uid_resp, uid_resp_len);
+ }
- if(p_hi14a_card) {
- memcpy(p_hi14a_card->uid + (cascade_level*3), uid_resp, uid_resp_len);
- p_hi14a_card->uidlen += uid_resp_len;
- }
- }
+ if(p_hi14a_card) {
+ memcpy(p_hi14a_card->uid + (cascade_level*3), uid_resp, uid_resp_len);
+ p_hi14a_card->uidlen += uid_resp_len;
+ }
+ }
- if(p_hi14a_card) {
- p_hi14a_card->sak = sak;
- p_hi14a_card->ats_len = 0;
- }
+ if(p_hi14a_card) {
+ p_hi14a_card->sak = sak;
+ p_hi14a_card->ats_len = 0;
+ }
- if( (sak & 0x20) == 0) {
- return 2; // non iso14443a compliant tag
- }
+ if( (sak & 0x20) == 0) {
+ return 2; // non iso14443a compliant tag
+ }
- // Request for answer to select
- AppendCrc14443a(rats, 2);
- ReaderTransmit(rats, sizeof(rats), NULL);
+ // Request for answer to select
+ AppendCrc14443a(rats, 2);
+ ReaderTransmit(rats, sizeof(rats), NULL);
- if (!(len = ReaderReceive(resp))) return 0;
+ if (!(len = ReaderReceive(resp, resp_par))) return 0;
- if(p_hi14a_card) {
- memcpy(p_hi14a_card->ats, resp, sizeof(p_hi14a_card->ats));
- p_hi14a_card->ats_len = len;
- }
+ if(p_hi14a_card) {
+ memcpy(p_hi14a_card->ats, resp, sizeof(p_hi14a_card->ats));
+ p_hi14a_card->ats_len = len;
+ }
- // reset the PCB block number
- iso14_pcb_blocknum = 0;
- return 1;
+ // reset the PCB block number
+ iso14_pcb_blocknum = 0;
+
+ return 1;
}
void iso14443a_setup(uint8_t fpga_minor_mode) {
iso14a_set_timeout(1050); // 10ms default
}
-int iso14_apdu(uint8_t * cmd, size_t cmd_len, void * data) {
+int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) {
+ uint8_t parity[MAX_PARITY_SIZE];
uint8_t real_cmd[cmd_len+4];
real_cmd[0] = 0x0a; //I-Block
// put block number into the PCB
AppendCrc14443a(real_cmd,cmd_len+2);
ReaderTransmit(real_cmd, cmd_len+4, NULL);
- size_t len = ReaderReceive(data);
- uint8_t * data_bytes = (uint8_t *) data;
+ size_t len = ReaderReceive(data, parity);
+ uint8_t *data_bytes = (uint8_t *) data;
if (!len)
return 0; //DATA LINK ERROR
// if we received an I- or R(ACK)-Block with a block number equal to the
size_t lenbits = c->arg[2];
uint32_t arg0 = 0;
byte_t buf[USB_CMD_DATA_SIZE];
+ uint8_t par[MAX_PARITY_SIZE];
if(param & ISO14A_CONNECT) {
iso14a_clear_trace();
if (lenbits) lenbits += 16;
}
if(lenbits>0) {
- ReaderTransmitBitsPar(cmd,lenbits,GetParity(cmd,lenbits/8), NULL);
+ GetParity(cmd, lenbits/8, par);
+ ReaderTransmitBitsPar(cmd, lenbits, par, NULL);
} else {
ReaderTransmit(cmd,len, NULL);
}
- arg0 = ReaderReceive(buf);
+ arg0 = ReaderReceive(buf, par);
cmd_send(CMD_ACK,arg0,0,0,buf,sizeof(buf));
}
uint8_t mf_nr_ar[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 };
static uint8_t mf_nr_ar3;
- uint8_t* receivedAnswer = (((uint8_t *)BigBuf) + FREE_BUFFER_OFFSET);
+ uint8_t* receivedAnswer = (((uint8_t *)BigBuf) + RECV_RESP_OFFSET);
+ uint8_t* receivedAnswerPar = (((uint8_t *)BigBuf) + RECV_RESP_PAR_OFFSET);
iso14a_clear_trace();
iso14a_set_tracing(TRUE);
byte_t nt_diff = 0;
- byte_t par = 0;
- //byte_t par_mask = 0xff;
+ uint8_t par[1] = {0}; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough
static byte_t par_low = 0;
bool led_on = TRUE;
uint8_t uid[10] ={0};
uint32_t cuid;
- uint32_t nt =0 ;
+ uint32_t nt = 0;
uint32_t previous_nt = 0;
static uint32_t nt_attacked = 0;
byte_t par_list[8] = {0,0,0,0,0,0,0,0};
sync_cycles = 65536; // theory: Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces).
nt_attacked = 0;
nt = 0;
- par = 0;
+ par[0] = 0;
}
else {
// we were unsuccessful on a previous call. Try another READER nonce (first 3 parity bits remain the same)
- // nt_attacked = prng_successor(nt_attacked, 1);
mf_nr_ar3++;
mf_nr_ar[3] = mf_nr_ar3;
- par = par_low;
+ par[0] = par_low;
}
LED_A_ON();
ReaderTransmit(mf_auth, sizeof(mf_auth), &sync_time);
// Receive the (4 Byte) "random" nonce
- if (!ReaderReceive(receivedAnswer)) {
+ if (!ReaderReceive(receivedAnswer, receivedAnswerPar)) {
if (MF_DBGLEVEL >= 1) Dbprintf("Mifare: Couldn't receive tag nonce");
continue;
}
consecutive_resyncs = 0;
// Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding
- if (ReaderReceive(receivedAnswer))
+ if (ReaderReceive(receivedAnswer, receivedAnswerPar))
{
catch_up_cycles = 8; // the PRNG is delayed by 8 cycles due to the NAC (4Bits = 0x05 encrypted) transfer
if (nt_diff == 0)
{
- par_low = par & 0x07; // there is no need to check all parities for other nt_diff. Parity Bits for mf_nr_ar[0..2] won't change
+ par_low = par[0] & 0xE0; // there is no need to check all parities for other nt_diff. Parity Bits for mf_nr_ar[0..2] won't change
}
led_on = !led_on;
if(led_on) LED_B_ON(); else LED_B_OFF();
- par_list[nt_diff] = par;
+ par_list[nt_diff] = SwapBits(par[0], 8);
ks_list[nt_diff] = receivedAnswer[0] ^ 0x05;
// Test if the information is complete
nt_diff = (nt_diff + 1) & 0x07;
mf_nr_ar[3] = (mf_nr_ar[3] & 0x1F) | (nt_diff << 5);
- par = par_low;
+ par[0] = par_low;
} else {
if (nt_diff == 0 && first_try)
{
- par++;
+ par[0]++;
} else {
- par = (((par >> 3) + 1) << 3) | par_low;
+ par[0] = ((par[0] & 0x1F) + 1) | par_low;
}
}
}
int res;
uint32_t selTimer = 0;
uint32_t authTimer = 0;
- uint32_t par = 0;
- int len = 0;
+ uint16_t len = 0;
uint8_t cardWRBL = 0;
uint8_t cardAUTHSC = 0;
uint8_t cardAUTHKEY = 0xff; // no authentication
struct Crypto1State *pcs;
pcs = &mpcs;
uint32_t numReads = 0;//Counts numer of times reader read a block
- uint8_t* receivedCmd = eml_get_bigbufptr_recbuf();
- uint8_t *response = eml_get_bigbufptr_sendbuf();
+ uint8_t* receivedCmd = get_bigbufptr_recvcmdbuf();
+ uint8_t* receivedCmd_par = receivedCmd + MAX_FRAME_SIZE;
+ uint8_t* response = get_bigbufptr_recvrespbuf();
+ uint8_t* response_par = response + MAX_FRAME_SIZE;
uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID
uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62};
//Now, get data
- res = EmGetCmd(receivedCmd, &len);
+ res = EmGetCmd(receivedCmd, &len, receivedCmd_par);
if (res == 2) { //Field is off!
cardSTATE = MFEMUL_NOFIELD;
LEDsoff();
case MFEMUL_NOFIELD:
case MFEMUL_HALTED:
case MFEMUL_IDLE:{
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
}
case MFEMUL_SELECT1:{
if( len != 8)
{
cardSTATE_TO_IDLE();
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
}
uint32_t ar = bytes_to_num(receivedCmd, 4);
- uint32_t nr= bytes_to_num(&receivedCmd[4], 4);
+ uint32_t nr = bytes_to_num(&receivedCmd[4], 4);
//Collect AR/NR
if(ar_nr_collected < 2){
// reader to do a WUPA after a while. /Martin
// -- which is the correct response. /piwi
cardSTATE_TO_IDLE();
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
}
}
case MFEMUL_SELECT2:{
if (!len) {
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
}
if (len == 2 && (receivedCmd[0] == 0x95 && receivedCmd[1] == 0x20)) {
// i guess there is a command). go into the work state.
if (len != 4) {
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
}
cardSTATE = MFEMUL_WORK;
case MFEMUL_WORK:{
if (len == 0) {
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
}
}
if(len != 4) {
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
}
}
emlGetMem(response, receivedCmd[1], 1);
AppendCrc14443a(response, 16);
- mf_crypto1_encrypt(pcs, response, 18, &par);
- EmSendCmdPar(response, 18, par);
+ mf_crypto1_encrypt(pcs, response, 18, response_par);
+ EmSendCmdPar(response, 18, response_par);
numReads++;
if(exitAfterNReads > 0 && numReads == exitAfterNReads) {
Dbprintf("%d reads done, exiting", numReads);
LED_C_OFF();
cardSTATE = MFEMUL_HALTED;
if (MF_DBGLEVEL >= 4) Dbprintf("--> HALTED. Selected time: %d ms", GetTickCount() - selTimer);
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
}
// RATS
cardSTATE = MFEMUL_WORK;
} else {
cardSTATE_TO_IDLE();
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
}
break;
}
cardSTATE_TO_IDLE();
break;
}
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
cardINTREG = cardINTREG + ans;
cardSTATE = MFEMUL_WORK;
break;
cardSTATE_TO_IDLE();
break;
}
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
cardINTREG = cardINTREG - ans;
cardSTATE = MFEMUL_WORK;
break;
cardSTATE_TO_IDLE();
break;
}
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
- LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
cardSTATE = MFEMUL_WORK;
break;
}
// The length of a received command will in most cases be no more than 18 bytes.
// So 32 should be enough!
uint8_t *receivedCmd = (((uint8_t *)BigBuf) + RECV_CMD_OFFSET);
+ uint8_t *receivedCmdPar = ((uint8_t *)BigBuf) + RECV_CMD_PAR_OFFSET;
// The response (tag -> reader) that we're receiving.
- uint8_t *receivedResponse = (((uint8_t *)BigBuf) + RECV_RES_OFFSET);
+ uint8_t *receivedResponse = (((uint8_t *)BigBuf) + RECV_RESP_OFFSET);
+ uint8_t *receivedResponsePar = ((uint8_t *)BigBuf) + RECV_RESP_PAR_OFFSET;
// As we receive stuff, we copy it from receivedCmd or receivedResponse
// into trace, along with its length and other annotations.
iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
// Set up the demodulator for tag -> reader responses.
- Demod.output = receivedResponse;
+ DemodInit(receivedResponse, receivedResponsePar);
// Set up the demodulator for the reader -> tag commands
- Uart.output = receivedCmd;
+ UartInit(receivedCmd, receivedCmdPar);
// Setup for the DMA.
FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE); // set transfer address and number of bytes. Start transfer.
uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4);
if(MillerDecoding(readerdata, (sniffCounter-1)*4)) {
LED_C_INV();
- if (MfSniffLogic(receivedCmd, Uart.len, Uart.parityBits, Uart.bitCount, TRUE)) break;
+ if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, TRUE)) break;
/* And ready to receive another command. */
UartReset();
if(ManchesterDecoding(tagdata, 0, (sniffCounter-1)*4)) {
LED_C_INV();
- if (MfSniffLogic(receivedResponse, Demod.len, Demod.parityBits, Demod.bitCount, FALSE)) break;
+ if (MfSniffLogic(receivedResponse, Demod.len, Demod.parity, Demod.bitCount, FALSE)) break;
// And ready to receive another response.
DemodReset();
#include "common.h"
#include "mifaresniff.h"
-// mifare reader over DMA buffer (SnoopIso14443a())!!!
-#define MIFARE_BUFF_OFFSET 3560 // \/ \/ \/
-// card emulator memory
-#define EML_RESPONSES 4000
-#define CARD_MEMORY 6000
-#define CARD_MEMORY_LEN 4096
-
typedef struct {
enum {
DEMOD_UNSYNCD,
uint16_t bitCount;
uint16_t collisionPos;
uint16_t syncBit;
- uint32_t parityBits;
+ uint8_t parityBits;
+ uint8_t parityLen;
uint16_t shiftReg;
uint16_t samples;
uint16_t len;
uint32_t startTime, endTime;
uint8_t *output;
+ uint8_t *parity;
} tDemod;
typedef enum {
uint16_t byteCntMax;
uint16_t posCnt;
uint16_t syncBit;
- uint32_t parityBits;
+ uint8_t parityBits;
+ uint8_t parityLen;
uint16_t highCnt;
uint16_t twoBits;
uint32_t startTime, endTime;
uint8_t *output;
+ uint8_t *parity;
} tUart;
extern byte_t oddparity (const byte_t bt);
-extern uint32_t GetParity(const uint8_t *pbtCmd, int iLen);
+extern void GetParity(const uint8_t *pbtCmd, uint16_t len, uint8_t *par);
extern void AppendCrc14443a(uint8_t *data, int len);
-extern void ReaderTransmit(uint8_t *frame, int len, uint32_t *timing);
-extern void ReaderTransmitBitsPar(uint8_t *frame, int bits, uint32_t par, uint32_t *timing);
-extern void ReaderTransmitPar(uint8_t *frame, int len, uint32_t par, uint32_t *timing);
-extern int ReaderReceive(uint8_t *receivedAnswer);
-extern int ReaderReceivePar(uint8_t *receivedAnswer, uint32_t *parptr);
+extern void ReaderTransmit(uint8_t *frame, uint16_t len, uint32_t *timing);
+extern void ReaderTransmitBitsPar(uint8_t *frame, uint16_t bits, uint8_t *par, uint32_t *timing);
+extern void ReaderTransmitPar(uint8_t *frame, uint16_t len, uint8_t *par, uint32_t *timing);
+extern int ReaderReceive(uint8_t *receivedAnswer, uint8_t *par);
extern void iso14443a_setup(uint8_t fpga_minor_mode);
-extern int iso14_apdu(uint8_t *cmd, size_t cmd_len, void *data);
+extern int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data);
extern int iso14443a_select_card(uint8_t *uid_ptr, iso14a_card_select_t *resp_data, uint32_t *cuid_ptr);
extern void iso14a_set_trigger(bool enable);
extern void iso14a_set_timeout(uint32_t timeout);
-extern void iso14a_clear_tracelen();
+extern void iso14a_clear_trace();
extern void iso14a_set_tracing(bool enable);
#endif /* __ISO14443A_H */
\r
if (MF_DBGLEVEL >= 2) DbpString("READ BLOCK FINISHED");\r
\r
- // add trace trailer\r
- memset(uid, 0x44, 4);\r
- LogTrace(uid, 4, 0, 0, TRUE);\r
LED_B_ON();\r
- cmd_send(CMD_ACK,isOK,0,0,dataoutbuf,16);\r
+ cmd_send(CMD_ACK,isOK,0,0,dataoutbuf,16);\r
LED_B_OFF();\r
\r
\r
\r
\r
// Return 1 if the nonce is invalid else return 0\r
-int valid_nonce(uint32_t Nt, uint32_t NtEnc, uint32_t Ks1, byte_t * parity) {\r
+int valid_nonce(uint32_t Nt, uint32_t NtEnc, uint32_t Ks1, uint8_t *parity) {\r
return ((oddparity((Nt >> 24) & 0xFF) == ((parity[0]) ^ oddparity((NtEnc >> 24) & 0xFF) ^ BIT(Ks1,16))) & \\r
(oddparity((Nt >> 16) & 0xFF) == ((parity[1]) ^ oddparity((NtEnc >> 16) & 0xFF) ^ BIT(Ks1,8))) & \\r
(oddparity((Nt >> 8) & 0xFF) == ((parity[2]) ^ oddparity((NtEnc >> 8) & 0xFF) ^ BIT(Ks1,0)))) ? 1 : 0;\r
uint16_t davg;\r
static uint16_t dmin, dmax;\r
uint8_t uid[10];\r
- uint32_t cuid, nt1, nt2, nttmp, nttest, par, ks1;\r
+ uint32_t cuid, nt1, nt2, nttmp, nttest, ks1;\r
+ uint8_t par[1];\r
uint32_t target_nt[2], target_ks[2];\r
\r
uint8_t par_array[4];\r
struct Crypto1State mpcs = {0, 0};\r
struct Crypto1State *pcs;\r
pcs = &mpcs;\r
- uint8_t* receivedAnswer = mifare_get_bigbufptr();\r
+ uint8_t* receivedAnswer = get_bigbufptr_recvrespbuf();\r
\r
uint32_t auth1_time, auth2_time;\r
static uint16_t delta_time;\r
\r
// nested authentication\r
auth2_time = auth1_time + delta_time;\r
- len = mifare_sendcmd_shortex(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, &par, &auth2_time);\r
+ len = mifare_sendcmd_shortex(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, par, &auth2_time);\r
if (len != 4) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Nested: Auth2 error len=%d", len);\r
continue;\r
};\r
\r
nt2 = bytes_to_num(receivedAnswer, 4); \r
- if (MF_DBGLEVEL >= 3) Dbprintf("Nonce#%d: Testing nt1=%08x nt2enc=%08x nt2par=%02x", i+1, nt1, nt2, par);\r
+ if (MF_DBGLEVEL >= 3) Dbprintf("Nonce#%d: Testing nt1=%08x nt2enc=%08x nt2par=%02x", i+1, nt1, nt2, par[0]);\r
\r
// Parity validity check\r
for (j = 0; j < 4; j++) {\r
- par_array[j] = (oddparity(receivedAnswer[j]) != ((par & 0x08) >> 3));\r
- par = par << 1;\r
+ par_array[j] = (oddparity(receivedAnswer[j]) != ((par[0] >> (7-j)) & 0x01));\r
}\r
\r
ncount = 0;\r
// ----------------------------- crypto1 destroy\r
crypto1_destroy(pcs);\r
\r
- // add trace trailer\r
- memset(uid, 0x44, 4);\r
- LogTrace(uid, 4, 0, 0, TRUE);\r
-\r
byte_t buf[4 + 4 * 4];\r
memcpy(buf, &cuid, 4);\r
memcpy(buf+4, &target_nt[0], 4);\r
uint32_t cuid;\r
\r
memset(uid, 0x00, 10);\r
- uint8_t* receivedAnswer = mifare_get_bigbufptr();\r
- \r
+ uint8_t *receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t *receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;\r
+\r
if (workFlags & 0x08) {\r
// clear trace\r
iso14a_clear_trace();\r
\r
// reset chip\r
if (needWipe){\r
- ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
- if(!ReaderReceive(receivedAnswer) || (receivedAnswer[0] != 0x0a)) {\r
+ ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("wupC1 error");\r
break;\r
};\r
\r
ReaderTransmit(wipeC, sizeof(wipeC), NULL);\r
- if(!ReaderReceive(receivedAnswer) || (receivedAnswer[0] != 0x0a)) {\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("wipeC error");\r
break;\r
};\r
\r
// write block\r
if (workFlags & 0x02) {\r
- ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
- if(!ReaderReceive(receivedAnswer) || (receivedAnswer[0] != 0x0a)) {\r
+ ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("wupC1 error");\r
break;\r
};\r
\r
ReaderTransmit(wupC2, sizeof(wupC2), NULL);\r
- if(!ReaderReceive(receivedAnswer) || (receivedAnswer[0] != 0x0a)) {\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("wupC2 error");\r
break;\r
};\r
}\r
\r
- if ((mifare_sendcmd_short(NULL, 0, 0xA0, blockNo, receivedAnswer, NULL) != 1) || (receivedAnswer[0] != 0x0a)) {\r
+ if ((mifare_sendcmd_short(NULL, 0, 0xA0, blockNo, receivedAnswer, receivedAnswerPar, NULL) != 1) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("write block send command error");\r
break;\r
};\r
AppendCrc14443a(d_block, 16);\r
\r
ReaderTransmit(d_block, sizeof(d_block), NULL);\r
- if ((ReaderReceive(receivedAnswer) != 1) || (receivedAnswer[0] != 0x0a)) {\r
+ if ((ReaderReceive(receivedAnswer, receivedAnswerPar) != 1) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("write block send data error");\r
break;\r
}; \r
uint32_t cuid = 0;\r
\r
memset(data, 0x00, 18);\r
- uint8_t* receivedAnswer = mifare_get_bigbufptr();\r
+ uint8_t* receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t *receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;\r
\r
if (workFlags & 0x08) {\r
// clear trace\r
while (true) {\r
if (workFlags & 0x02) {\r
ReaderTransmitBitsPar(wupC1,7,0, NULL);\r
- if(!ReaderReceive(receivedAnswer) || (receivedAnswer[0] != 0x0a)) {\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("wupC1 error");\r
break;\r
};\r
\r
ReaderTransmit(wupC2, sizeof(wupC2), NULL);\r
- if(!ReaderReceive(receivedAnswer) || (receivedAnswer[0] != 0x0a)) {\r
+ if(!ReaderReceive(receivedAnswer, receivedAnswerPar) || (receivedAnswer[0] != 0x0a)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("wupC2 error");\r
break;\r
};\r
}\r
\r
// read block\r
- if ((mifare_sendcmd_short(NULL, 0, 0x30, blockNo, receivedAnswer, NULL) != 18)) {\r
+ if ((mifare_sendcmd_short(NULL, 0, 0x30, blockNo, receivedAnswer, receivedAnswerPar, NULL) != 18)) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("read block send command error");\r
break;\r
};\r
#include "mifaresniff.h"\r
#include "apps.h"\r
\r
+\r
static int sniffState = SNF_INIT;\r
static uint8_t sniffUIDType;\r
static uint8_t sniffUID[8];\r
return FALSE;\r
}\r
\r
-bool RAMFUNC MfSniffLogic(const uint8_t *data, uint16_t len, uint32_t parity, uint16_t bitCnt, bool reader) {\r
+bool RAMFUNC MfSniffLogic(const uint8_t *data, uint16_t len, uint8_t *parity, uint16_t bitCnt, bool reader) {\r
\r
if (reader && (len == 1) && (bitCnt == 7)) { // reset on 7-Bit commands from reader\r
sniffState = SNF_INIT;\r
sniffBuf[11] = sniffSAK;\r
sniffBuf[12] = 0xFF;\r
sniffBuf[13] = 0xFF;\r
- LogTrace(sniffBuf, 14, 0, parity, true);\r
+ LogTrace(sniffBuf, 14, 0, 0, NULL, TRUE);\r
} // intentionally no break;\r
case SNF_CARD_CMD:{ \r
- LogTrace(data, len, 0, parity, true);\r
+ LogTrace(data, len, 0, 0, NULL, TRUE);\r
sniffState = SNF_CARD_RESP;\r
timerData = GetTickCount();\r
break;\r
}\r
case SNF_CARD_RESP:{\r
- LogTrace(data, len, 0, parity, false);\r
+ LogTrace(data, len, 0, 0, NULL, FALSE);\r
sniffState = SNF_CARD_CMD;\r
timerData = GetTickCount();\r
break;\r
#define SNF_UID_7 0\r
\r
bool MfSniffInit(void);\r
-bool RAMFUNC MfSniffLogic(const uint8_t * data, uint16_t len, uint32_t parity, uint16_t bitCnt, bool reader);\r
+bool RAMFUNC MfSniffLogic(const uint8_t *data, uint16_t len, uint8_t *parity, uint16_t bitCnt, bool reader);\r
bool RAMFUNC MfSniffSend(uint16_t maxTimeoutMs);\r
bool intMfSniffSend();\r
bool MfSniffEnd(void);\r
int MF_DBGLEVEL = MF_DBG_ALL;\r
\r
// memory management\r
-uint8_t* mifare_get_bigbufptr(void) {\r
- return (((uint8_t *)BigBuf) + MIFARE_BUFF_OFFSET); // was 3560 - tied to other size changes\r
+uint8_t* get_bigbufptr_recvrespbuf(void) {\r
+ return (((uint8_t *)BigBuf) + RECV_RESP_OFFSET); \r
}\r
-uint8_t* eml_get_bigbufptr_sendbuf(void) {\r
+uint8_t* get_bigbufptr_recvcmdbuf(void) {\r
return (((uint8_t *)BigBuf) + RECV_CMD_OFFSET); \r
}\r
-uint8_t* eml_get_bigbufptr_recbuf(void) {\r
- return (((uint8_t *)BigBuf) + MIFARE_BUFF_OFFSET);\r
-}\r
-uint8_t* eml_get_bigbufptr_cardmem(void) {\r
- return (((uint8_t *)BigBuf) + CARD_MEMORY);\r
+uint8_t* get_bigbufptr_emlcardmem(void) {\r
+ return (((uint8_t *)BigBuf) + CARD_MEMORY_OFFSET);\r
}\r
\r
// crypto1 helpers\r
return;\r
}\r
\r
-void mf_crypto1_encrypt(struct Crypto1State *pcs, uint8_t *data, int len, uint32_t *par) {\r
+void mf_crypto1_encrypt(struct Crypto1State *pcs, uint8_t *data, uint16_t len, uint8_t *par) {\r
uint8_t bt = 0;\r
int i;\r
- uint32_t mltpl = 1 << (len - 1); // for len=18 it=0x20000\r
- *par = 0;\r
+ par[0] = 0;\r
for (i = 0; i < len; i++) {\r
bt = data[i];\r
data[i] = crypto1_byte(pcs, 0x00, 0) ^ data[i];\r
- *par = (*par >> 1) | ( ((filter(pcs->odd) ^ oddparity(bt)) & 0x01) * mltpl );\r
+ if((i&0x0007) == 0) par[i>>3] = 0;\r
+ par[i>>3] |= (((filter(pcs->odd) ^ oddparity(bt)) & 0x01)<<(7-(i&0x0007)));\r
} \r
return;\r
}\r
}\r
\r
// send commands\r
-int mifare_sendcmd_short(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t data, uint8_t* answer, uint32_t *timing)\r
+int mifare_sendcmd_short(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t data, uint8_t* answer, uint8_t *answer_parity, uint32_t *timing)\r
{\r
- return mifare_sendcmd_shortex(pcs, crypted, cmd, data, answer, NULL, timing);
+ return mifare_sendcmd_shortex(pcs, crypted, cmd, data, answer, answer_parity, timing);
}
-int mifare_sendcmd_short_special(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t* data, uint8_t* answer, uint8_t *timing)
+int mifare_sendcmd_short_special(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t* data, uint8_t* answer, uint8_t *answer_parity, uint32_t *timing)
{
- uint8_t dcmd[8];//, ecmd[4];
- //uint32_t par=0;
+ uint8_t dcmd[8];//, ecmd[4];
+ //uint32_t par=0;
- dcmd[0] = cmd;
- dcmd[1] = data[0];
+ dcmd[0] = cmd;
+ dcmd[1] = data[0];
dcmd[2] = data[1];
dcmd[3] = data[2];
dcmd[4] = data[3];
//memcpy(ecmd, dcmd, sizeof(dcmd));
ReaderTransmit(dcmd, sizeof(dcmd), NULL);
- int len = ReaderReceive(answer);
+ int len = ReaderReceive(answer, answer_parity);
if(!len)
{
if (MF_DBGLEVEL >= 1) Dbprintf("Authentication failed. Card timeout.");
return len;
}
-int mifare_sendcmd_shortex(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t data, uint8_t* answer, uint32_t * parptr, uint32_t *timing)
+int mifare_sendcmd_shortex(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t data, uint8_t *answer, uint8_t *answer_parity, uint32_t *timing)
{
uint8_t dcmd[4], ecmd[4];
- uint32_t pos, par, res;\r
-\r
+ uint16_t pos, res;\r
+ uint8_t par[1]; // 1 Byte parity is enough here\r
dcmd[0] = cmd;\r
dcmd[1] = data;\r
AppendCrc14443a(dcmd, 2);\r
memcpy(ecmd, dcmd, sizeof(dcmd));\r
\r
if (crypted) {\r
- par = 0;\r
+ par[0] = 0;\r
for (pos = 0; pos < 4; pos++)\r
{\r
ecmd[pos] = crypto1_byte(pcs, 0x00, 0) ^ dcmd[pos];\r
- par = (par >> 1) | ( ((filter(pcs->odd) ^ oddparity(dcmd[pos])) & 0x01) * 0x08 );\r
+ par[0] |= (((filter(pcs->odd) ^ oddparity(dcmd[pos])) & 0x01) << (7-pos));\r
} \r
\r
ReaderTransmitPar(ecmd, sizeof(ecmd), par, timing);\r
ReaderTransmit(dcmd, sizeof(dcmd), timing);\r
}\r
\r
- int len = ReaderReceivePar(answer, &par);\r
+ int len = ReaderReceive(answer, par);\r
+ \r
+ if (answer_parity) *answer_parity = par[0];\r
\r
- if (parptr) *parptr = par;\r
-\r
if (crypted == CRYPT_ALL) {\r
if (len == 1) {\r
res = 0;\r
}\r
\r
// mifare commands\r
-int mifare_classic_auth(struct Crypto1State *pcs, uint32_t uid, uint8_t blockNo, uint8_t keyType, uint64_t ui64Key, uint64_t isNested) \r
+int mifare_classic_auth(struct Crypto1State *pcs, uint32_t uid, uint8_t blockNo, uint8_t keyType, uint64_t ui64Key, uint8_t isNested) \r
{\r
return mifare_classic_authex(pcs, uid, blockNo, keyType, ui64Key, isNested, NULL, NULL);\r
}\r
\r
-int mifare_classic_authex(struct Crypto1State *pcs, uint32_t uid, uint8_t blockNo, uint8_t keyType, uint64_t ui64Key, uint64_t isNested, uint32_t * ntptr, uint32_t *timing) \r
+int mifare_classic_authex(struct Crypto1State *pcs, uint32_t uid, uint8_t blockNo, uint8_t keyType, uint64_t ui64Key, uint8_t isNested, uint32_t *ntptr, uint32_t *timing) \r
{\r
// variables\r
int len; \r
uint32_t pos;\r
uint8_t tmp4[4];\r
- byte_t par = 0;\r
- byte_t ar[4];\r
+ uint8_t par[1] = {0};\r
+ byte_t nr[4];\r
uint32_t nt, ntpp; // Supplied tag nonce\r
\r
uint8_t mf_nr_ar[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 };\r
- uint8_t* receivedAnswer = mifare_get_bigbufptr();\r
-\r
+ uint8_t *receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t *receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;\r
+ \r
// Transmit MIFARE_CLASSIC_AUTH\r
- len = mifare_sendcmd_short(pcs, isNested, 0x60 + (keyType & 0x01), blockNo, receivedAnswer, timing);\r
- if (MF_DBGLEVEL >= 4) Dbprintf("rand nonce len: %x", len); \r
+ len = mifare_sendcmd_short(pcs, isNested, 0x60 + (keyType & 0x01), blockNo, receivedAnswer, receivedAnswerPar, timing);\r
+ if (MF_DBGLEVEL >= 4) Dbprintf("rand tag nonce len: %x", len); \r
if (len != 4) return 1;\r
\r
- ar[0] = 0x55;\r
- ar[1] = 0x41;\r
- ar[2] = 0x49;\r
- ar[3] = 0x92; \r
+ // "random" reader nonce:\r
+ nr[0] = 0x55;\r
+ nr[1] = 0x41;\r
+ nr[2] = 0x49;\r
+ nr[3] = 0x92; \r
\r
// Save the tag nonce (nt)\r
nt = bytes_to_num(receivedAnswer, 4);\r
if (ntptr)\r
*ntptr = nt;\r
\r
- par = 0;\r
+ \r
// Generate (encrypted) nr+parity by loading it into the cipher (Nr)\r
+ par[0] = 0;\r
for (pos = 0; pos < 4; pos++)\r
{\r
- mf_nr_ar[pos] = crypto1_byte(pcs, ar[pos], 0) ^ ar[pos];\r
- par = (par >> 1) | ( ((filter(pcs->odd) ^ oddparity(ar[pos])) & 0x01) * 0x80 );\r
+ mf_nr_ar[pos] = crypto1_byte(pcs, nr[pos], 0) ^ nr[pos];\r
+ par[0] |= (((filter(pcs->odd) ^ oddparity(nr[pos])) & 0x01) << (7-pos));\r
} \r
\r
// Skip 32 bits in pseudo random generator\r
{\r
nt = prng_successor(nt,8);\r
mf_nr_ar[pos] = crypto1_byte(pcs,0x00,0) ^ (nt & 0xff);\r
- par = (par >> 1)| ( ((filter(pcs->odd) ^ oddparity(nt & 0xff)) & 0x01) * 0x80 );\r
+ par[0] |= (((filter(pcs->odd) ^ oddparity(nt & 0xff)) & 0x01) << (7-pos));\r
} \r
\r
// Transmit reader nonce and reader answer\r
ReaderTransmitPar(mf_nr_ar, sizeof(mf_nr_ar), par, NULL);\r
\r
- // Receive 4 bit answer\r
- len = ReaderReceive(receivedAnswer);\r
+ // Receive 4 byte tag answer\r
+ len = ReaderReceive(receivedAnswer, receivedAnswerPar);\r
if (!len)\r
{\r
if (MF_DBGLEVEL >= 1) Dbprintf("Authentication failed. Card timeout.");\r
int len; \r
uint8_t bt[2];\r
\r
- uint8_t* receivedAnswer = mifare_get_bigbufptr();\r
+ uint8_t* receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t* receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;\r
\r
// command MIFARE_CLASSIC_READBLOCK\r
- len = mifare_sendcmd_short(pcs, 1, 0x30, blockNo, receivedAnswer, NULL);\r
+ len = mifare_sendcmd_short(pcs, 1, 0x30, blockNo, receivedAnswer, receivedAnswerPar, NULL);\r
if (len == 1) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("Cmd Error: %02x", receivedAnswer[0]); \r
return 1;\r
int mifare_ultra_readblock(uint32_t uid, uint8_t blockNo, uint8_t *blockData)
{
// variables
- int len;
+ uint16_t len;
uint8_t bt[2];
- uint8_t* receivedAnswer = mifare_get_bigbufptr();
+ uint8_t* receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t* receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;
// command MIFARE_CLASSIC_READBLOCK
- len = mifare_sendcmd_short(NULL, 1, 0x30, blockNo, receivedAnswer,NULL);
+ len = mifare_sendcmd_short(NULL, 1, 0x30, blockNo, receivedAnswer, receivedAnswerPar, NULL);
if (len == 1) {
if (MF_DBGLEVEL >= 1) Dbprintf("Cmd Error: %02x", receivedAnswer[0]);
return 1;
// variables
int len, i; \r
uint32_t pos;\r
- uint32_t par = 0;\r
+ uint8_t par[3] = {0}; // enough for 18 Bytes to send\r
byte_t res;\r
\r
uint8_t d_block[18], d_block_enc[18];\r
- uint8_t* receivedAnswer = mifare_get_bigbufptr();\r
+ uint8_t* receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t* receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;\r
\r
// command MIFARE_CLASSIC_WRITEBLOCK\r
- len = mifare_sendcmd_short(pcs, 1, 0xA0, blockNo, receivedAnswer, NULL);\r
+ len = mifare_sendcmd_short(pcs, 1, 0xA0, blockNo, receivedAnswer, receivedAnswerPar, NULL);\r
\r
if ((len != 1) || (receivedAnswer[0] != 0x0A)) { // 0x0a - ACK\r
if (MF_DBGLEVEL >= 1) Dbprintf("Cmd Error: %02x", receivedAnswer[0]); \r
AppendCrc14443a(d_block, 16);\r
\r
// crypto\r
- par = 0;\r
for (pos = 0; pos < 18; pos++)\r
{\r
d_block_enc[pos] = crypto1_byte(pcs, 0x00, 0) ^ d_block[pos];\r
- par = (par >> 1) | ( ((filter(pcs->odd) ^ oddparity(d_block[pos])) & 0x01) * 0x20000 );\r
+ par[pos>>3] |= (((filter(pcs->odd) ^ oddparity(d_block[pos])) & 0x01) << (7 - (pos&0x0007)));\r
} \r
\r
ReaderTransmitPar(d_block_enc, sizeof(d_block_enc), par, NULL);\r
\r
// Receive the response\r
- len = ReaderReceive(receivedAnswer); \r
+ len = ReaderReceive(receivedAnswer, receivedAnswerPar); \r
\r
res = 0;\r
for (i = 0; i < 4; i++)\r
int mifare_ultra_writeblock(uint32_t uid, uint8_t blockNo, uint8_t *blockData)
{
- // variables
- int len;
- uint32_t par = 0;
+ // variables
+ uint16_t len;
+ uint8_t par[3] = {0}; // enough for 18 parity bits
- uint8_t d_block[18];
- uint8_t* receivedAnswer = mifare_get_bigbufptr();
+ uint8_t d_block[18];
+ uint8_t* receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t* receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;
- // command MIFARE_CLASSIC_WRITEBLOCK
- len = mifare_sendcmd_short(NULL, 1, 0xA0, blockNo, receivedAnswer,NULL);
+ // command MIFARE_CLASSIC_WRITEBLOCK
+ len = mifare_sendcmd_short(NULL, true, 0xA0, blockNo, receivedAnswer, receivedAnswerPar, NULL);
- if ((len != 1) || (receivedAnswer[0] != 0x0A)) { // 0x0a - ACK
- if (MF_DBGLEVEL >= 1) Dbprintf("Cmd Addr Error: %02x", receivedAnswer[0]);
- return 1;
- }
+ if ((len != 1) || (receivedAnswer[0] != 0x0A)) { // 0x0a - ACK
+ if (MF_DBGLEVEL >= 1) Dbprintf("Cmd Addr Error: %02x", receivedAnswer[0]);
+ return 1;
+ }
memset(d_block,'\0',18);
memcpy(d_block, blockData, 16);
- AppendCrc14443a(d_block, 16);
+ AppendCrc14443a(d_block, 16);
ReaderTransmitPar(d_block, sizeof(d_block), par, NULL);
- // Receive the response
- len = ReaderReceive(receivedAnswer);
+ // Receive the response
+ len = ReaderReceive(receivedAnswer, receivedAnswerPar);
if ((len != 1) || (receivedAnswer[0] != 0x0A)) { // 0x0a - ACK
- if (MF_DBGLEVEL >= 1) Dbprintf("Cmd Data Error: %02x %d", receivedAnswer[0],len);
- return 2;
- }
+ if (MF_DBGLEVEL >= 1) Dbprintf("Cmd Data Error: %02x %d", receivedAnswer[0],len);
+ return 2;
+ }
- return 0;
+ return 0;
}
int mifare_ultra_special_writeblock(uint32_t uid, uint8_t blockNo, uint8_t *blockData)
{
- // variables
- int len;
- //uint32_t par = 0;
+ uint16_t len;
- uint8_t d_block[8];
- uint8_t* receivedAnswer = mifare_get_bigbufptr();
+ uint8_t d_block[8];
+ uint8_t *receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t *receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;
- // command MIFARE_CLASSIC_WRITEBLOCK
+ // command MIFARE_CLASSIC_WRITEBLOCK
memset(d_block,'\0',8);
d_block[0]= blockNo;
memcpy(d_block+1,blockData,4);
AppendCrc14443a(d_block, 6);
//i know the data send here is correct
- len = mifare_sendcmd_short_special(NULL, 1, 0xA2, d_block, receivedAnswer,NULL);
+ len = mifare_sendcmd_short_special(NULL, 1, 0xA2, d_block, receivedAnswer, receivedAnswerPar, NULL);
- if (receivedAnswer[0] != 0x0A) { // 0x0a - ACK
- if (MF_DBGLEVEL >= 1) Dbprintf("Cmd Send Error: %02x %d", receivedAnswer[0],len);
- return 1;
- }
- return 0;
+ if (receivedAnswer[0] != 0x0A) { // 0x0a - ACK
+ if (MF_DBGLEVEL >= 1) Dbprintf("Cmd Send Error: %02x %d", receivedAnswer[0],len);
+ return 1;
+ }
+\r
+ return 0;
}
int mifare_classic_halt(struct Crypto1State *pcs, uint32_t uid)
{
// variables
- int len; \r
+ uint16_t len; \r
\r
// Mifare HALT\r
- uint8_t* receivedAnswer = mifare_get_bigbufptr();\r
+ uint8_t *receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t *receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;\r
\r
- len = mifare_sendcmd_short(pcs, pcs == NULL ? 0:1, 0x50, 0x00, receivedAnswer, NULL);\r
+ len = mifare_sendcmd_short(pcs, pcs == NULL ? false:true, 0x50, 0x00, receivedAnswer, receivedAnswerPar, NULL);\r
if (len != 0) {\r
if (MF_DBGLEVEL >= 1) Dbprintf("halt error. response len: %x", len); \r
return 1;\r
int mifare_ultra_halt(uint32_t uid)
{
- // variables
- int len;
+ uint16_t len;
// Mifare HALT
- uint8_t* receivedAnswer = mifare_get_bigbufptr();
+ uint8_t *receivedAnswer = get_bigbufptr_recvrespbuf();\r
+ uint8_t *receivedAnswerPar = receivedAnswer + MAX_FRAME_SIZE;
- len = mifare_sendcmd_short(NULL, 1, 0x50, 0x00, receivedAnswer, NULL);
+ len = mifare_sendcmd_short(NULL, true, 0x50, 0x00, receivedAnswer, receivedAnswerPar, NULL);
if (len != 0) {
if (MF_DBGLEVEL >= 1) Dbprintf("halt error. response len: %x", len);
return 1;
\r
// work with emulator memory
void emlSetMem(uint8_t *data, int blockNum, int blocksCount) {
- uint8_t* emCARD = eml_get_bigbufptr_cardmem();
+ uint8_t* emCARD = get_bigbufptr_emlcardmem();
\r
memcpy(emCARD + blockNum * 16, data, blocksCount * 16);\r
}\r
\r
void emlGetMem(uint8_t *data, int blockNum, int blocksCount) {\r
- uint8_t* emCARD = eml_get_bigbufptr_cardmem();\r
+ uint8_t* emCARD = get_bigbufptr_emlcardmem();\r
\r
memcpy(data, emCARD + blockNum * 16, blocksCount * 16);\r
}\r
\r
void emlGetMemBt(uint8_t *data, int bytePtr, int byteCount) {\r
- uint8_t* emCARD = eml_get_bigbufptr_cardmem();\r
+ uint8_t* emCARD = get_bigbufptr_emlcardmem();\r
\r
memcpy(data, emCARD + bytePtr, byteCount);\r
}\r
\r
int emlCheckValBl(int blockNum) {\r
- uint8_t* emCARD = eml_get_bigbufptr_cardmem();\r
+ uint8_t* emCARD = get_bigbufptr_emlcardmem();\r
uint8_t* data = emCARD + blockNum * 16;\r
\r
if ((data[0] != (data[4] ^ 0xff)) || (data[0] != data[8]) ||\r
}\r
\r
int emlGetValBl(uint32_t *blReg, uint8_t *blBlock, int blockNum) {\r
- uint8_t* emCARD = eml_get_bigbufptr_cardmem();\r
+ uint8_t* emCARD = get_bigbufptr_emlcardmem();\r
uint8_t* data = emCARD + blockNum * 16;\r
\r
if (emlCheckValBl(blockNum)) {\r
}\r
\r
int emlSetValBl(uint32_t blReg, uint8_t blBlock, int blockNum) {\r
- uint8_t* emCARD = eml_get_bigbufptr_cardmem();\r
+ uint8_t* emCARD = get_bigbufptr_emlcardmem();\r
uint8_t* data = emCARD + blockNum * 16;\r
\r
memcpy(data + 0, &blReg, 4);\r
\r
uint64_t emlGetKey(int sectorNum, int keyType) {\r
uint8_t key[6];\r
- uint8_t* emCARD = eml_get_bigbufptr_cardmem();\r
+ uint8_t* emCARD = get_bigbufptr_emlcardmem();\r
\r
memcpy(key, emCARD + 16 * (FirstBlockOfSector(sectorNum) + NumBlocksPerSector(sectorNum) - 1) + keyType * 10, 6);\r
return bytes_to_num(key, 6);\r
\r
const uint8_t trailer[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x80, 0x69, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};\r
const uint8_t uid[] = {0xe6, 0x84, 0x87, 0xf3, 0x16, 0x88, 0x04, 0x00, 0x46, 0x8e, 0x45, 0x55, 0x4d, 0x70, 0x41, 0x04};\r
- uint8_t* emCARD = eml_get_bigbufptr_cardmem();\r
+ uint8_t* emCARD = get_bigbufptr_emlcardmem();\r
\r
- memset(emCARD, 0, CARD_MEMORY_LEN);\r
+ memset(emCARD, 0, CARD_MEMORY_SIZE);\r
\r
// fill sectors trailer data\r
for(b = 3; b < 256; b<127?(b+=4):(b+=16)) {\r
#define CRYPT_NONE 0\r
#define CRYPT_ALL 1\r
#define CRYPT_REQUEST 2\r
-#define AUTH_FIRST 0\r
+#define AUTH_FIRST 0 \r
#define AUTH_NESTED 2\r
\r
// mifare 4bit card answers\r
\r
//functions
uint8_t* mifare_get_bigbufptr(void);
-int mifare_sendcmd_short(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t data, uint8_t* answer, uint32_t *timing);
-int mifare_sendcmd_short_special(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t *data, uint8_t* amswer, uint8_t *timing);
-int mifare_sendcmd_shortex(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t data, uint8_t* answer, uint32_t * parptr, uint32_t *timing);
+int mifare_sendcmd_short(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t data, uint8_t* answer, uint8_t *answer_parity, uint32_t *timing);
+int mifare_sendcmd_short_special(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t *data, uint8_t* answer, uint8_t *answer_parity, uint32_t *timing);
+int mifare_sendcmd_shortex(struct Crypto1State *pcs, uint8_t crypted, uint8_t cmd, uint8_t data, uint8_t* answer, uint8_t *answer_parity, uint32_t *timing);
-int mifare_classic_auth(struct Crypto1State *pcs, uint32_t uid, \
- uint8_t blockNo, uint8_t keyType, uint64_t ui64Key, uint64_t isNested);\r
-int mifare_classic_authex(struct Crypto1State *pcs, uint32_t uid, \
- uint8_t blockNo, uint8_t keyType, uint64_t ui64Key, uint64_t isNested, uint32_t * ntptr, uint32_t *timing);
+int mifare_classic_auth(struct Crypto1State *pcs, uint32_t uid, uint8_t blockNo, uint8_t keyType, uint64_t ui64Key, uint8_t isNested);\r
+int mifare_classic_authex(struct Crypto1State *pcs, uint32_t uid, uint8_t blockNo, uint8_t keyType, uint64_t ui64Key, uint8_t isNested, uint32_t * ntptr, uint32_t *timing);
int mifare_classic_readblock(struct Crypto1State *pcs, uint32_t uid, uint8_t blockNo, uint8_t *blockData);
int mifare_ultra_readblock(uint32_t uid, uint8_t blockNo, uint8_t *blockData);
int mifare_classic_writeblock(struct Crypto1State *pcs, uint32_t uid, uint8_t blockNo, uint8_t *blockData);
// crypto functions
void mf_crypto1_decrypt(struct Crypto1State *pcs, uint8_t *receivedCmd, int len);
-void mf_crypto1_encrypt(struct Crypto1State *pcs, uint8_t *data, int len, uint32_t *par);\r
+void mf_crypto1_encrypt(struct Crypto1State *pcs, uint8_t *data, uint16_t len, uint8_t *par);\r
uint8_t mf_crypto1_encrypt4bit(struct Crypto1State *pcs, uint8_t data);\r
\r
// memory management\r
-uint8_t* mifare_get_bigbufptr(void);\r
-uint8_t* eml_get_bigbufptr_sendbuf(void);\r
-uint8_t* eml_get_bigbufptr_recbuf(void);\r
+uint8_t* get_bigbufptr_recvrespbuf(void);\r
+uint8_t* get_bigbufptr_recvcmdbuf(void);\r
+uint8_t* get_bigbufptr_emlcardmem(void);\r
\r
// Mifare memory structure\r
uint8_t NumBlocksPerSector(uint8_t sectorNo);\r
int CmdTuneSamples(const char *Cmd)
{
- int cnt = 0;
- int n = 255;
- uint8_t got[255];
-
- PrintAndLog("Reading %d samples\n", n);
- GetFromBigBuf(got,n,7256); // armsrc/apps.h: #define FREE_BUFFER_OFFSET 7256
- WaitForResponse(CMD_ACK,NULL);
- for (int j = 0; j < n; j++) {
- GraphBuffer[cnt++] = ((int)got[j]) - 128;
- }
+ int timeout = 0;
+ printf("\nMeasuring antenna characteristics, please wait...");
+
+ UsbCommand c = {CMD_MEASURE_ANTENNA_TUNING};
+ SendCommand(&c);
+
+ UsbCommand resp;
+ while(!WaitForResponseTimeout(CMD_MEASURED_ANTENNA_TUNING,&resp,1000)) {
+ timeout++;
+ printf(".");
+ if (timeout > 7) {
+ PrintAndLog("\nNo response from Proxmark. Aborting...");
+ return 1;
+ }
+ }
+
+ int peakv, peakf;
+ int vLf125, vLf134, vHf;
+ vLf125 = resp.arg[0] & 0xffff;
+ vLf134 = resp.arg[0] >> 16;
+ vHf = resp.arg[1] & 0xffff;;
+ peakf = resp.arg[2] & 0xffff;
+ peakv = resp.arg[2] >> 16;
+ PrintAndLog("");
+ PrintAndLog("# LF antenna: %5.2f V @ 125.00 kHz", vLf125/1000.0);
+ PrintAndLog("# LF antenna: %5.2f V @ 134.00 kHz", vLf134/1000.0);
+ PrintAndLog("# LF optimal: %5.2f V @%9.2f kHz", peakv/1000.0, 12000.0/(peakf+1));
+ PrintAndLog("# HF antenna: %5.2f V @ 13.56 MHz", vHf/1000.0);
+ if (peakv<2000)
+ PrintAndLog("# Your LF antenna is unusable.");
+ else if (peakv<10000)
+ PrintAndLog("# Your LF antenna is marginal.");
+ if (vHf<2000)
+ PrintAndLog("# Your HF antenna is unusable.");
+ else if (vHf<5000)
+ PrintAndLog("# Your HF antenna is marginal.");
+
+ for (int i = 0; i < 256; i++) {
+ GraphBuffer[i] = resp.d.asBytes[i] - 128;
+ }
- PrintAndLog("Done! Divisor 89 is 134khz, 95 is 125khz.\n");
- PrintAndLog("\n");
- GraphTraceLen = n;
- RepaintGraphWindow();
- return 0;
+ PrintAndLog("Done! Divisor 89 is 134khz, 95 is 125khz.\n");
+ PrintAndLog("\n");
+ GraphTraceLen = 256;
+ ShowGraphWindow();
+
+ return 0;
}
+
int CmdLoad(const char *Cmd)
{
FILE *f = fopen(Cmd, "r");
if (param == 'f') {
ShowWaitCycles = true;
}
-
- uint8_t got[1920];
- GetFromBigBuf(got,sizeof(got),0);
- WaitForResponse(CMD_ACK,NULL);
+
+// for the time being. Need better Bigbuf handling.
+#define TRACE_SIZE 3000
+
+ uint8_t trace[TRACE_SIZE];
+ GetFromBigBuf(trace, TRACE_SIZE, 0);
+ WaitForResponse(CMD_ACK, NULL);
PrintAndLog("Recorded Activity");
PrintAndLog("");
PrintAndLog("Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer");
PrintAndLog("All times are in carrier periods (1/13.56Mhz)");
PrintAndLog("");
- PrintAndLog(" Start | End | Src | Data");
- PrintAndLog("-----------|-----------|-----|--------");
-
- int i = 0;
- uint32_t first_timestamp = 0;
+ PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC ");
+ PrintAndLog("-----------|-----------|-----|-----------------------------------------------------------------------");
+
+ uint16_t tracepos = 0;
+ uint16_t duration;
+ uint16_t data_len;
+ uint16_t parity_len;
+ bool isResponse;
uint32_t timestamp;
- uint32_t EndOfTransmissionTimestamp = 0;
+ uint32_t first_timestamp;
+ uint32_t EndOfTransmissionTimestamp;
for (;;) {
- if(i >= 1900) {
+
+ if(tracepos >= TRACE_SIZE) {
break;
}
- bool isResponse;
- timestamp = *((uint32_t *)(got+i));
- if (timestamp & 0x80000000) {
- timestamp &= 0x7fffffff;
+ timestamp = *((uint32_t *)(trace + tracepos));
+ if(tracepos == 0) {
+ first_timestamp = timestamp;
+ }
+ tracepos += 4;
+ duration = *((uint16_t *)(trace + tracepos));
+ tracepos += 2;
+ data_len = *((uint16_t *)(trace + tracepos));
+ tracepos += 2;
+
+ if (data_len & 0x8000) {
+ data_len &= 0x7fff;
isResponse = true;
} else {
isResponse = false;
}
- if(i==0) {
- first_timestamp = timestamp;
- }
-
- int parityBits = *((uint32_t *)(got+i+4));
+ parity_len = (data_len-1)/8 + 1;
- int len = got[i+8];
-
- if (len > 100) {
- break;
- }
- if (i + len >= 1900) {
+ if (tracepos + data_len + parity_len >= TRACE_SIZE) {
break;
}
-
- uint8_t *frame = (got+i+9);
+
+ uint8_t *frame = trace + tracepos;
+ tracepos += data_len;
+ uint8_t *parityBytes = trace + tracepos;
+ tracepos += parity_len;
// Break and stick with current result if buffer was not completely full
- if (frame[0] == 0x44 && frame[1] == 0x44 && frame[2] == 0x44 && frame[3] == 0x44) break;
+ if (timestamp == 0x44444444) break;
+
+ char line[16][110];
+ for (int j = 0; j < data_len; j++) {
+ int oddparity = 0x01;
+ int k;
+
+ for (k=0;k<8;k++) {
+ oddparity ^= (((frame[j] & 0xFF) >> k) & 0x01);
+ }
- char line[1000] = "";
- int j;
- if (len) {
- for (j = 0; j < len; j++) {
- int oddparity = 0x01;
- int k;
+ uint8_t parityBits = parityBytes[j>>3];
+ if (isResponse && (oddparity != ((parityBits >> (7-(j&0x0007))) & 0x01))) {
+ sprintf(line[j/16]+((j%16)*4), "%02x! ", frame[j]);
+ } else {
+ sprintf(line[j/16]+((j%16)*4), "%02x ", frame[j]);
+ }
- for (k=0;k<8;k++) {
- oddparity ^= (((frame[j] & 0xFF) >> k) & 0x01);
- }
+ }
- //if((parityBits >> (len - j - 1)) & 0x01) {
- if (isResponse && (oddparity != ((parityBits >> (len - j - 1)) & 0x01))) {
- sprintf(line+(j*4), "%02x! ", frame[j]);
- } else {
- sprintf(line+(j*4), "%02x ", frame[j]);
- }
- }
- } else {
- if (ShowWaitCycles) {
- uint32_t next_timestamp = (*((uint32_t *)(got+i+9))) & 0x7fffffff;
- sprintf(line, "fdt (Frame Delay Time): %d", (next_timestamp - timestamp));
+ char crc[5] = "";
+ if (data_len > 2) {
+ uint8_t b1, b2;
+ ComputeCrc14443(CRC_14443_A, frame, data_len-2, &b1, &b2);
+ if (b1 != frame[data_len-2] || b2 != frame[data_len-1]) {
+ sprintf(crc, (isResponse & (data_len < 6)) ? "" : "!crc");
+ } else {
+ sprintf(crc, "");
}
}
- char *crc;
- crc = "";
- if (len > 2) {
- uint8_t b1, b2;
- for (j = 0; j < (len - 1); j++) {
- // gives problems... search for the reason..
- /*if(frame[j] == 0xAA) {
- switch(frame[j+1]) {
- case 0x01:
- crc = "[1] Two drops close after each other";
- break;
- case 0x02:
- crc = "[2] Potential SOC with a drop in second half of bitperiod";
- break;
- case 0x03:
- crc = "[3] Segment Z after segment X is not possible";
- break;
- case 0x04:
- crc = "[4] Parity bit of a fully received byte was wrong";
- break;
- default:
- crc = "[?] Unknown error";
- break;
- }
- break;
- }*/
+ EndOfTransmissionTimestamp = timestamp + duration;
+
+ int num_lines = (data_len - 1)/16 + 1;
+ for (int j = 0; j < num_lines; j++) {
+ if (j == 0) {
+ PrintAndLog(" %9d | %9d | %s | %-64s| %s",
+ (timestamp - first_timestamp),
+ (EndOfTransmissionTimestamp - first_timestamp),
+ (isResponse ? "Tag" : "Rdr"),
+ line[j],
+ (j == num_lines-1)?crc:"");
+ } else {
+ PrintAndLog(" | | | %-64s| %s",
+ line[j],
+ (j == num_lines-1)?crc:"");
}
+ }
- if (strlen(crc)==0) {
- ComputeCrc14443(CRC_14443_A, frame, len-2, &b1, &b2);
- if (b1 != frame[len-2] || b2 != frame[len-1]) {
- crc = (isResponse & (len < 6)) ? "" : " !crc";
- } else {
- crc = "";
- }
+ bool next_isResponse = *((uint16_t *)(trace + tracepos + 6)) & 0x8000;
+
+ if (ShowWaitCycles && !isResponse && next_isResponse) {
+ uint32_t next_timestamp = *((uint32_t *)(trace + tracepos));
+ if (next_timestamp != 0x44444444) {
+ PrintAndLog(" %9d | %9d | %s | fdt (Frame Delay Time): %d",
+ (EndOfTransmissionTimestamp - first_timestamp),
+ (next_timestamp - first_timestamp),
+ " ",
+ (next_timestamp - EndOfTransmissionTimestamp));
}
- } else {
- crc = ""; // SHORT
}
-
- i += (len + 9);
-
- EndOfTransmissionTimestamp = (*((uint32_t *)(got+i))) & 0x7fffffff;
-
- if (!ShowWaitCycles) i += 9;
-
- PrintAndLog(" %9d | %9d | %s | %s %s",
- (timestamp - first_timestamp),
- (EndOfTransmissionTimestamp - first_timestamp),
- (len?(isResponse ? "Tag" : "Rdr"):" "),
- line, crc);
-
+
}
+
return 0;
}
size_t nonce_length = resp.arg[1];
char *nonce = (char *) malloc(2 * nonce_length + 1);
for(int j = 0; j < nonce_length; j++) {
- snprintf(nonce + (2 * j), 3, "%02X", resp.d.asBytes[j]);
+ sprintf(nonce + (2 * j), "%02X", resp.d.asBytes[j]);
}
// print nonce
- PrintAndLog("Length: %d, Nonce: %s",resp.arg[1], nonce);
+ PrintAndLog("Length: %d, Nonce: %s", nonce_length, nonce);
}
if (i < n - 1) {
sleep(d);
uint8_t atqa[2];\r
uint8_t sak;\r
bool isTag;\r
- uint32_t parity;\r
uint8_t buf[3000];\r
uint8_t * bufPtr = buf;\r
memset(buf, 0x00, 3000);\r
printf(">\n");\r
PrintAndLog("received trace len: %d packages: %d", blockLen, pckNum);\r
num = 0;\r
- while (bufPtr - buf + 9 < blockLen) {\r
- isTag = bufPtr[3] & 0x80 ? true:false;\r
- bufPtr += 4;\r
- parity = *((uint32_t *)(bufPtr));\r
- bufPtr += 4;\r
- len = bufPtr[0];\r
- bufPtr++;\r
- if ((len == 14) && (bufPtr[0] == 0xff) && (bufPtr[1] == 0xff)) {\r
+ while (bufPtr - buf < blockLen) {\r
+ bufPtr += 6; // ignore void timing information\r
+ len = *((uint16_t *)bufPtr);\r
+ if(len & 0x8000) {\r
+ isTag = true;\r
+ len &= 0x7fff;\r
+ } else {\r
+ isTag = false;\r
+ }\r
+ bufPtr += 2;\r
+ if ((len == 14) && (bufPtr[0] == 0xff) && (bufPtr[1] == 0xff) && (bufPtr[12] == 0xff) && (bufPtr[13] == 0xff)) {\r
memcpy(uid, bufPtr + 2, 7);\r
memcpy(atqa, bufPtr + 2 + 7, 2);\r
uid_len = (atqa[0] & 0xC0) == 0x40 ? 7 : 4;\r
} else {\r
PrintAndLog("%s(%d):%s", isTag ? "TAG":"RDR", num, sprint_hex(bufPtr, len));\r
if (wantLogToFile) AddLogHex(logHexFileName, isTag ? "TAG: ":"RDR: ", bufPtr, len);\r
- if (wantDecrypt) mfTraceDecode(bufPtr, len, parity, wantSaveToEmlFile);\r
+ if (wantDecrypt) mfTraceDecode(bufPtr, len, wantSaveToEmlFile);\r
}\r
bufPtr += len;\r
+ bufPtr += ((len-1)/8+1); // ignore parity\r
num++;\r
}\r
}\r
#include "cmdparser.h"
#include "cmdhw.h"
#include "cmdmain.h"
+#include "cmddata.h"
/* low-level hardware control */
int CmdTune(const char *Cmd)
{
- UsbCommand c = {CMD_MEASURE_ANTENNA_TUNING};
- SendCommand(&c);
- return 0;
+ return CmdTuneSamples(Cmd);
}
int CmdVersion(const char *Cmd)
return;
} break;
- case CMD_MEASURED_ANTENNA_TUNING: {
- int peakv, peakf;
- int vLf125, vLf134, vHf;
- vLf125 = UC->arg[0] & 0xffff;
- vLf134 = UC->arg[0] >> 16;
- vHf = UC->arg[1] & 0xffff;;
- peakf = UC->arg[2] & 0xffff;
- peakv = UC->arg[2] >> 16;
- PrintAndLog("");
- PrintAndLog("# LF antenna: %5.2f V @ 125.00 kHz", vLf125/1000.0);
- PrintAndLog("# LF antenna: %5.2f V @ 134.00 kHz", vLf134/1000.0);
- PrintAndLog("# LF optimal: %5.2f V @%9.2f kHz", peakv/1000.0, 12000.0/(peakf+1));
- PrintAndLog("# HF antenna: %5.2f V @ 13.56 MHz", vHf/1000.0);
- if (peakv<2000)
- PrintAndLog("# Your LF antenna is unusable.");
- else if (peakv<10000)
- PrintAndLog("# Your LF antenna is marginal.");
- if (vHf<2000)
- PrintAndLog("# Your HF antenna is unusable.");
- else if (vHf<5000)
- PrintAndLog("# Your HF antenna is marginal.");
- } break;
+ // case CMD_MEASURED_ANTENNA_TUNING: {
+ // int peakv, peakf;
+ // int vLf125, vLf134, vHf;
+ // vLf125 = UC->arg[0] & 0xffff;
+ // vLf134 = UC->arg[0] >> 16;
+ // vHf = UC->arg[1] & 0xffff;;
+ // peakf = UC->arg[2] & 0xffff;
+ // peakv = UC->arg[2] >> 16;
+ // PrintAndLog("");
+ // PrintAndLog("# LF antenna: %5.2f V @ 125.00 kHz", vLf125/1000.0);
+ // PrintAndLog("# LF antenna: %5.2f V @ 134.00 kHz", vLf134/1000.0);
+ // PrintAndLog("# LF optimal: %5.2f V @%9.2f kHz", peakv/1000.0, 12000.0/(peakf+1));
+ // PrintAndLog("# HF antenna: %5.2f V @ 13.56 MHz", vHf/1000.0);
+ // if (peakv<2000)
+ // PrintAndLog("# Your LF antenna is unusable.");
+ // else if (peakv<10000)
+ // PrintAndLog("# Your LF antenna is marginal.");
+ // if (vHf<2000)
+ // PrintAndLog("# Your HF antenna is unusable.");
+ // else if (vHf<5000)
+ // PrintAndLog("# Your HF antenna is marginal.");
+ // } break;
case CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K: {
// printf("received samples: ");
\r
// "MAGIC" CARD\r
\r
-int mfCSetUID(uint8_t *uid, uint8_t *oldUID, int wantWipe) {\r
+int mfCSetUID(uint8_t *uid, uint8_t *oldUID, bool wantWipe) {\r
uint8_t block0[16];\r
memset(block0, 0, 16);\r
memcpy(block0, uid, 4); \r
return mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER);\r
}\r
\r
-int mfCSetBlock(uint8_t blockNo, uint8_t *data, uint8_t *uid, int wantWipe, uint8_t params) {\r
+int mfCSetBlock(uint8_t blockNo, uint8_t *data, uint8_t *uid, bool wantWipe, uint8_t params) {\r
uint8_t isOK = 0;\r
\r
UsbCommand c = {CMD_MIFARE_EML_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}};\r
\r
uint32_t uid; // serial number\r
uint32_t nt; // tag challenge\r
-uint32_t nt_par; \r
uint32_t nr_enc; // encrypted reader challenge\r
uint32_t ar_enc; // encrypted reader response\r
-uint32_t nr_ar_par; \r
uint32_t at_enc; // encrypted tag response\r
-uint32_t at_par; \r
\r
int isTraceCardEmpty(void) {\r
return ((traceCard[0] == 0) && (traceCard[1] == 0) && (traceCard[2] == 0) && (traceCard[3] == 0));\r
}\r
\r
\r
-int mfTraceDecode(uint8_t *data_src, int len, uint32_t parity, bool wantSaveToEmlFile) {\r
+int mfTraceDecode(uint8_t *data_src, int len, bool wantSaveToEmlFile) {\r
uint8_t data[64];\r
\r
if (traceState == TRACE_ERROR) return 1;\r
traceState = TRACE_AUTH2;\r
\r
nt = bytes_to_num(data, 4);\r
- nt_par = parity;\r
return 0;\r
} else {\r
traceState = TRACE_ERROR;\r
\r
nr_enc = bytes_to_num(data, 4);\r
ar_enc = bytes_to_num(data + 4, 4);\r
- nr_ar_par = parity;\r
return 0;\r
} else {\r
traceState = TRACE_ERROR;\r
traceState = TRACE_IDLE;\r
\r
at_enc = bytes_to_num(data, 4);\r
- at_par = parity;\r
\r
// decode key here)\r
ks2 = ar_enc ^ prng_successor(nt, 64);\r
int mfEmlGetMem(uint8_t *data, int blockNum, int blocksCount);\r
int mfEmlSetMem(uint8_t *data, int blockNum, int blocksCount);\r
\r
-int mfCSetUID(uint8_t *uid, uint8_t *oldUID, int wantWipe);\r
-int mfCSetBlock(uint8_t blockNo, uint8_t *data, uint8_t *uid, int wantWipe, uint8_t params);\r
+int mfCSetUID(uint8_t *uid, uint8_t *oldUID, bool wantWipe);\r
+int mfCSetBlock(uint8_t blockNo, uint8_t *data, uint8_t *uid, bool wantWipe, uint8_t params);\r
int mfCGetBlock(uint8_t blockNo, uint8_t *data, uint8_t params);\r
\r
int mfTraceInit(uint8_t *tuid, uint8_t *atqa, uint8_t sak, bool wantSaveToEmlFile);\r
-int mfTraceDecode(uint8_t *data_src, int len, uint32_t parity, bool wantSaveToEmlFile);\r
+int mfTraceDecode(uint8_t *data_src, int len, bool wantSaveToEmlFile);\r
\r
int isTraceCardEmpty(void);\r
int isBlockEmpty(int blockN);\r