]> cvs.zerfleddert.de Git - rsbs2/blob - bmc/chassis.c
decrease poweron and reset-time to the same value as rsbs2 fw
[rsbs2] / bmc / chassis.c
1 #include <avr/io.h>
2 #include <avr/interrupt.h>
3 #include <stdio.h>
4
5 #include "chassis.h"
6
7 #ifdef __AVR_ATmega16__
8 #define CHASSISPORT B
9 #define POWER_PIN 0
10 #define RESET_PIN 1
11 #define ACTIVE_LOW
12 #else
13 #error "Please add chassis power/reset-PIN information for this chip"
14 #endif
15
16 #define __CPORT(port) PORT##port
17 #define _CPORT(port) __CPORT(port)
18 #define CPORT _CPORT(CHASSISPORT)
19
20 #define __CDDR(port) DDR##port
21 #define _CDDR(port) __CDDR(port)
22 #define CDDR _CDDR(CHASSISPORT)
23
24 static volatile int power_cnt = 0;
25 static volatile int reset_cnt = 0;
26
27 static void chassis_set_pins(uint8_t pins, uint8_t state);
28
29 void chassis_init()
30 {
31 chassis_set_pins((1<<POWER_PIN) | (1<<RESET_PIN), 0);
32 CDDR |= ((1<<POWER_PIN) | (1<<RESET_PIN));
33
34 /* About 1ms */
35 OCR0 = ((F_CPU/64)/1000) - 1;
36
37 TCCR0 = ((1<<WGM01) | (1<<CS01) | (1<<CS00)); /* CTC, Prescaler 64 */
38 TIMSK |= (1<<OCIE0);
39
40 }
41
42 static void chassis_set_pins(uint8_t pins, uint8_t state)
43 {
44 #ifdef ACTIVE_LOW
45 state = !state;
46 #endif
47
48 if(state) {
49 CPORT |= pins;
50 } else {
51 CPORT &= ~pins;
52 }
53 }
54
55 static void chassis_power(int msec)
56 {
57 uint8_t old_SREG = SREG;
58
59 chassis_set_pins((1<<POWER_PIN), 1);
60
61 cli();
62 if (!power_cnt)
63 power_cnt = msec;
64 SREG = old_SREG;
65 }
66
67 static void chassis_reset(int msec)
68 {
69 uint8_t old_SREG = SREG;
70
71 chassis_set_pins((1<<RESET_PIN), 1);
72
73 cli();
74 if (!reset_cnt)
75 reset_cnt = msec;
76 SREG = old_SREG;
77 }
78
79 void chassis_control(unsigned char action)
80 {
81 #ifdef DEBUG
82 printf("Chassis control 0x%02x\n", action);
83 #endif
84
85 switch(action) {
86 case CHASSIS_ACTION_POWER_DOWN:
87 chassis_power(5000);
88 break;
89
90 case CHASSIS_ACTION_POWER_UP:
91 chassis_power(200);
92 break;
93
94 case CHASSIS_ACTION_HARD_RESET:
95 chassis_reset(200);
96 break;
97
98 default:
99 #ifdef DEBUG
100 printf("Unimplemented chassis action 0x%02x\n", action);
101 #endif
102 break;
103 }
104 }
105
106 ISR(TIMER0_COMP_vect)
107 {
108 if (power_cnt) {
109 power_cnt--;
110
111 if (!power_cnt)
112 chassis_set_pins((1<<POWER_PIN), 0);
113 }
114 if (reset_cnt) {
115 reset_cnt--;
116
117 if (!reset_cnt)
118 chassis_set_pins((1<<RESET_PIN), 0);
119 }
120 }
Impressum, Datenschutz